A

AuthorizationExceptionClass in namespace Illuminate\Auth\Access
AuthorizationException::asNotFound() — Method in class AuthorizationException

Set the HTTP response status code to 404.

$ GateEvaluated#abilityProperty in class GateEvaluated

The ability being evaluated.

$ GateEvaluated#argumentsProperty in class GateEvaluated

The arguments given during evaluation.

$ Gate#abilitiesProperty in class Gate

All of the defined abilities.

$ Gate#afterCallbacksProperty in class Gate

All of the registered after callbacks.

Gate::allowIf() — Method in class Gate

Perform an on-demand authorization check. Throw an authorization exception if the condition or callback is false.

Gate::authorizeOnDemand() — Method in class Gate

Authorize a given condition or callback.

Gate::after() — Method in class Gate

Register a callback to run after all Gate checks.

Gate::allows() — Method in class Gate

Determine if the given ability should be granted for the current user.

Gate::any() — Method in class Gate

Determine if any one of the given abilities should be granted for the current user.

Gate::authorize() — Method in class Gate

Determine if the given ability should be granted for the current user.

Gate::abilities() — Method in class Gate

Get all of the defined abilities.

HandlesAuthorization::allow() — Method in class HandlesAuthorization

Create a new access response.

$ Response#allowedProperty in class Response

Indicates whether the response was allowed.

Response::allow() — Method in class Response

Create a new "allow" Response.

Response::allowed() — Method in class Response

Determine if the response was allowed.

Response::authorize() — Method in class Response

Throw authorization exception if response was denied.

Response::asNotFound() — Method in class Response

Set the HTTP response status code to 404.

AuthManagerClass in namespace Illuminate\Auth
$ AuthManager#appProperty in class AuthManager

The application instance.

AuthServiceProviderClass in namespace Illuminate\Auth
AuthenticatableClass in namespace Illuminate\Auth
AuthenticationExceptionClass in namespace Illuminate\Auth
AttemptingClass in namespace Illuminate\Auth\Events
AuthenticatedClass in namespace Illuminate\Auth\Events
$ GenericUser#attributesProperty in class GenericUser

All of the user's attributes.

GuardHelpers::authenticate() — Method in class GuardHelpers

Determine if the current user is authenticated. If not, throw an exception.

AuthenticateClass in namespace Illuminate\Auth\Middleware
$ Authenticate#authProperty in class Authenticate

The authentication factory instance.

Authenticate::authenticate() — Method in class Authenticate

Determine if the user is logged in to any of the given guards.

AuthenticateWithBasicAuthClass in namespace Illuminate\Auth\Middleware
$ AuthenticateWithBasicAuth#authProperty in class AuthenticateWithBasicAuth

The guard factory instance.

AuthorizeClass in namespace Illuminate\Auth\Middleware
$ PasswordBrokerManager#appProperty in class PasswordBrokerManager

The application instance.

SessionGuard::attemptBasic() — Method in class SessionGuard

Attempt to authenticate using basic authentication.

SessionGuard::attempt() — Method in class SessionGuard

Attempt to authenticate a user using the given credentials.

SessionGuard::attemptWhen() — Method in class SessionGuard

Attempt to authenticate a user with credentials and additional callbacks.

SessionGuard::attempting() — Method in class SessionGuard

Register an authentication attempt event listener.

BroadcastController::authenticate() — Method in class BroadcastController

Authenticate the request for channel access.

BroadcastController::authenticateUser() — Method in class BroadcastController

Authenticate the current user.

$ BroadcastManager#appProperty in class BroadcastManager

The application instance.

BroadcastManager::ably() — Method in class BroadcastManager

Get an Ably instance for the given configuration.

AblyBroadcasterClass in namespace Illuminate\Broadcasting\Broadcasters
$ AblyBroadcaster#ablyProperty in class AblyBroadcaster

The AblyRest SDK instance.

AblyBroadcaster::auth() — Method in class AblyBroadcaster

Authenticate the incoming request for a given channel.

$ Broadcaster#authenticatedUserCallbackProperty in class Broadcaster

The callback to resolve the authenticated user information.

LogBroadcaster::auth() — Method in class LogBroadcaster

Authenticate the incoming request for a given channel.

NullBroadcaster::auth() — Method in class NullBroadcaster

Authenticate the incoming request for a given channel.

PusherBroadcaster::auth() — Method in class PusherBroadcaster

Authenticate the incoming request for a given channel.

RedisBroadcaster::auth() — Method in class RedisBroadcaster

Authenticate the incoming request for a given channel.

Batch::add() — Method in class Batch

Add additional jobs to the batch.

Batch::allowsFailures() — Method in class Batch

Determine if the batch allows jobs to fail without cancelling the batch.

PendingBatch::add() — Method in class PendingBatch

Add jobs to the batch.

PendingBatch::allowFailures() — Method in class PendingBatch

Indicate that the batch should not be cancelled when a job within the batch fails.

PendingBatch::allowsFailures() — Method in class PendingBatch

Determine if the pending batch allows jobs to fail without cancelling the batch.

$ Queueable#afterCommitProperty in class Queueable

Indicates whether the job should be dispatched after all database transactions have committed.

Queueable::allOnConnection() — Method in class Queueable

Set the desired connection for the chain.

Queueable::allOnQueue() — Method in class Queueable

Set the desired queue for the chain.

Queueable::afterCommit() — Method in class Queueable

Indicate that the job should be dispatched after all database transactions have committed.

Queueable::appendToChain() — Method in class Queueable

Append a job to the end of the current chain.

UniqueLock::acquire() — Method in class UniqueLock

Attempt to acquire a lock for the given job.

UpdatedBatchJobCounts::allJobsHaveRanExactlyOnce() — Method in class UpdatedBatchJobCounts

Determine if all jobs have run exactly once.

ApcStoreClass in namespace Illuminate\Cache
$ ApcStore#apcProperty in class ApcStore

The APC wrapper instance.

ApcWrapperClass in namespace Illuminate\Cache
$ ApcWrapper#apcuProperty in class ApcWrapper

Indicates if APCu is supported.

ArrayLockClass in namespace Illuminate\Cache
ArrayLock::acquire() — Method in class ArrayLock

Attempt to acquire the lock.

ArrayStoreClass in namespace Illuminate\Cache
CacheLock::acquire() — Method in class CacheLock

Attempt to acquire the lock.

$ CacheManager#appProperty in class CacheManager

The application instance.

DatabaseLock::acquire() — Method in class DatabaseLock

Attempt to acquire the lock.

DatabaseStore::add() — Method in class DatabaseStore

Store an item in the cache if the key doesn't exist.

DynamoDbLock::acquire() — Method in class DynamoDbLock

Attempt to acquire the lock.

DynamoDbStore::add() — Method in class DynamoDbStore

Store an item in the cache if the key doesn't exist.

FileLock::acquire() — Method in class FileLock

Attempt to acquire the lock.

FileStore::add() — Method in class FileStore

Store an item in the cache if the key doesn't exist.

Lock::acquire() — Method in class Lock

Attempt to acquire the lock.

MemcachedLock::acquire() — Method in class MemcachedLock

Attempt to acquire the lock.

MemcachedStore::add() — Method in class MemcachedStore

Store an item in the cache if the key doesn't exist.

NoLock::acquire() — Method in class NoLock

Attempt to acquire the lock.

RateLimiter::attempt() — Method in class RateLimiter

Attempts to execute a callback if it's not limited.

RateLimiter::attempts() — Method in class RateLimiter

Get the number of attempts for the given key.

RateLimiter::availableIn() — Method in class RateLimiter

Get the number of seconds until the "key" is accessible again.

RedisLock::acquire() — Method in class RedisLock

Attempt to acquire the lock.

RedisStore::add() — Method in class RedisStore

Store an item in the cache if the key doesn't exist.

RedisTagSet::addEntry() — Method in class RedisTagSet

Add a reference entry to the tag set's underlying sorted set.

RedisTaggedCache::add() — Method in class RedisTaggedCache

Store an item in the cache if the key does not exist.

Repository::add() — Method in class Repository

Store an item in the cache if the key does not exist.

Repository::all() — Method in class Repository

Get all of the configuration items for the application.

ApplicationClass in namespace Illuminate\Console
Application::artisanBinary() — Method in class Application

Determine the proper Artisan executable.

Application::add() — Method in class Application

Add a command to the console.

Application::addToParent() — Method in class Application

Add the command to the parent instance.

$ Command#aliasesProperty in class Command

The console command name aliases.

CreatesMatchingTest::addTestOptions() — Method in class CreatesMatchingTest

Add the standard command options for generating matching tests.

InteractsWithIO::argument() — Method in class InteractsWithIO

Get the value of a command argument.

InteractsWithIO::arguments() — Method in class InteractsWithIO

Get all of the arguments passed to the command.

InteractsWithIO::ask() — Method in class InteractsWithIO

Prompt the user for input.

InteractsWithIO::anticipate() — Method in class InteractsWithIO

Prompt the user for input with auto completion.

InteractsWithIO::askWithCompletion() — Method in class InteractsWithIO

Prompt the user for input with auto completion.

InteractsWithIO::alert() — Method in class InteractsWithIO

Write a string in an alert box.

PromptsForMissingInput::afterPromptingForMissingArguments() — Method in class PromptsForMissingInput

Perform actions after the user was prompted for missing arguments.

ArtisanStartingClass in namespace Illuminate\Console\Events
$ ArtisanStarting#artisanProperty in class ArtisanStarting

The Artisan application instance.

GeneratorCommand::alreadyExists() — Method in class GeneratorCommand

Determine if the class already exists.

$ Event#afterCallbacksProperty in class Event

The array of callbacks to be run after the event is finished.

Event::appendOutputTo() — Method in class Event

Append the output of the command to a given location.

Event::after() — Method in class Event

Register a callback to be called after the operation.

ManagesFrequencies::at() — Method in class ManagesFrequencies

Schedule the command at a given time.

$ Signals#availabilityResolverProperty in class Signals
AlertClass in namespace Illuminate\Console\View\Components
AskClass in namespace Illuminate\Console\View\Components
AskWithCompletionClass in namespace Illuminate\Console\View\Components
Factory::alert() — Method in class Factory
Factory::ask() — Method in class Factory
Factory::askWithCompletion() — Method in class Factory
BoundMethod::addDependencyForCallParameter() — Method in class BoundMethod

Get the dependency for the given call parameter.

$ Container#aliasesProperty in class Container

The registered type aliases.

$ Container#abstractAliasesProperty in class Container

The registered aliases keyed by the abstract name.

$ Container#afterResolvingCallbacksProperty in class Container

All of the after resolving callbacks by class type.

Container::addContextualBinding() — Method in class Container

Add a contextual binding to the container.

Container::alias() — Method in class Container

Alias a type to a different name.

Container::afterResolving() — Method in class Container

Register a new after resolving callback for all types.

Util::arrayWrap() — Method in class Util

If the given value is not an array and not null, wrap it in one.

AuthorizableClass in namespace Illuminate\Contracts\Auth\Access
Gate::after() — Method in class Gate

Register a callback to run after all Gate checks.

Gate::allows() — Method in class Gate

Determine if the given ability should be granted for the current user.

Gate::any() — Method in class Gate

Determine if any one of the given abilities should be granted for the current user.

Gate::authorize() — Method in class Gate

Determine if the given ability should be granted for the current user.

Gate::abilities() — Method in class Gate

Get all of the defined abilities.

AuthenticatableClass in namespace Illuminate\Contracts\Auth
AuthenticatesRequestsClass in namespace Illuminate\Contracts\Auth\Middleware
StatefulGuard::attempt() — Method in class StatefulGuard

Attempt to authenticate a user using the given credentials.

Broadcaster::auth() — Method in class Broadcaster

Authenticate the incoming request for a given channel.

Repository::add() — Method in class Repository

Store an item in the cache if the key does not exist.

Repository::all() — Method in class Repository

Get all of the configuration items for the application.

ApplicationClass in namespace Illuminate\Contracts\Console
Kernel::all() — Method in class Kernel

Get all of the commands registered with the console.

Container::alias() — Method in class Container

Alias a type to a different name.

Container::addContextualBinding() — Method in class Container

Add a contextual binding to the container.

Container::afterResolving() — Method in class Container

Register a new after resolving callback.

Filesystem::append() — Method in class Filesystem

Append to a file.

Filesystem::allFiles() — Method in class Filesystem

Get all of the files from the given directory (recursive).

Filesystem::allDirectories() — Method in class Filesystem

Get all (recursive) of the directories within a given directory.

ApplicationClass in namespace Illuminate\Contracts\Foundation
MaintenanceMode::activate() — Method in class MaintenanceMode

Take the application down for maintenance.

MaintenanceMode::active() — Method in class MaintenanceMode

Determine if the application is currently down for maintenance.

AttachableClass in namespace Illuminate\Contracts\Mail
CursorPaginator::appends() — Method in class CursorPaginator

Add a set of query string values to the paginator.

Paginator::appends() — Method in class Paginator

Add a set of query string values to the paginator.

Job::attempts() — Method in class Job

Get the number of times the job has been attempted.

UrlGenerator::asset() — Method in class UrlGenerator

Generate the URL to an application asset.

UrlGenerator::action() — Method in class UrlGenerator

Get the URL to a controller action.

AuthenticatesSessionsClass in namespace Illuminate\Contracts\Session\Middleware
Session::all() — Method in class Session

Get all of the session data.

ArrayableClass in namespace Illuminate\Contracts\Support
MessageBag::add() — Method in class MessageBag

Add a message to the bag.

MessageBag::all() — Method in class MessageBag

Get all of the messages for every key in the bag.

Loader::addNamespace() — Method in class Loader

Add a new namespace to the loader.

Loader::addJsonPath() — Method in class Loader

Add a new JSON path to the loader.

Validator::after() — Method in class Validator

Add an after validation callback.

Factory::addNamespace() — Method in class Factory

Add a new namespace to the loader.

AddQueuedCookiesToResponseClass in namespace Illuminate\Cookie\Middleware
Manager::addConnection() — Method in class Manager

Register a connection with the manager.

ManagesTransactions::afterCommitCallbacksShouldBeExecuted() — Method in class ManagesTransactions

Determine if after commit callbacks should be executed.

ManagesTransactions::afterCommit() — Method in class ManagesTransactions

Execute the callback after a transaction commits.

Connection::affectingStatement() — Method in class Connection

Run an SQL statement and get the number of rows affected.

Connection::allowQueryDurationHandlersToRunAgain() — Method in class Connection

Allow all the query duration handlers to run again, even if they have already run.

ConnectionInterface::affectingStatement() — Method in class ConnectionInterface

Run an SQL statement and get the number of rows affected.

ConnectionResolver::addConnection() — Method in class ConnectionResolver

Add a connection to the resolver.

PostgresConnector::addSslOptions() — Method in class PostgresConnector

Add the SSL options to the DSN.

ShowModelCommand::attributeIsHidden() — Method in class ShowModelCommand

Determine if the given attribute is hidden.

$ DatabaseManager#appProperty in class DatabaseManager

The application instance.

DatabaseManager::availableDrivers() — Method in class DatabaseManager

Get all of the drivers that are actually available.

DatabaseTransactionRecord::addCallback() — Method in class DatabaseTransactionRecord

Register a callback to be executed after committing.

DatabaseTransactionsManager::addCallback() — Method in class DatabaseTransactionsManager

Register a transaction callback.

$ BroadcastableModelEventOccurred#afterCommitProperty in class BroadcastableModelEventOccurred

Indicates whether the job should be dispatched after all database transactions have committed.

Builder::addUpdatedAtColumn() — Method in class Builder

Add the "updated at" column to an array of values.

Builder::addUniqueIdsToUpsertValues() — Method in class Builder

Add unique IDs to the inserted values.

Builder::addTimestampsToUpsertValues() — Method in class Builder

Add timestamps to the inserted values.

Builder::addUpdatedAtToUpsertColumns() — Method in class Builder

Add the "updated at" column to the updated columns.

Builder::applyScopes() — Method in class Builder

Apply the scopes to the Eloquent builder instance and return it.

Builder::addNewWheresWithinGroup() — Method in class Builder

Nest where conditions by slicing them at the given where count.

Builder::addNestedWiths() — Method in class Builder

Parse the nested relationships in a relation.

ArrayObjectClass in namespace Illuminate\Database\Eloquent\Casts
AsArrayObjectClass in namespace Illuminate\Database\Eloquent\Casts
AsCollectionClass in namespace Illuminate\Database\Eloquent\Casts
AsEncryptedArrayObjectClass in namespace Illuminate\Database\Eloquent\Casts
AsEncryptedCollectionClass in namespace Illuminate\Database\Eloquent\Casts
AsEnumArrayObjectClass in namespace Illuminate\Database\Eloquent\Casts
$ AsEnumArrayObject#argumentsProperty in class AsEnumArrayObject
AsEnumCollectionClass in namespace Illuminate\Database\Eloquent\Casts
$ AsEnumCollection#argumentsProperty in class AsEnumCollection
AsStringableClass in namespace Illuminate\Database\Eloquent\Casts
AttributeClass in namespace Illuminate\Database\Eloquent\Casts
Collection::append() — Method in class Collection

Append an attribute across the entire collection.

$ HasAttributes#attributesProperty in class HasAttributes

The model's attributes.

$ HasAttributes#attributeCastCacheProperty in class HasAttributes

The attributes that have been cast using "Attribute" return type mutators.

$ HasAttributes#appendsProperty in class HasAttributes

The accessors to append to the model's array form.

$ HasAttributes#attributeMutatorCacheProperty in class HasAttributes

The cache of the "Attribute" return type marked mutated attributes for each class.

HasAttributes::attributesToArray() — Method in class HasAttributes

Convert the model's attributes to an array.

HasAttributes::addDateAttributesToArray() — Method in class HasAttributes

Add the date attributes to the attributes array.

HasAttributes::addMutatedAttributesToArray() — Method in class HasAttributes

Add the mutated attributes to the attributes array.

HasAttributes::addCastAttributesToArray() — Method in class HasAttributes

Add the casted attributes to the attributes array.

HasAttributes::asJson() — Method in class HasAttributes

Encode the given value as JSON.

HasAttributes::asDecimal() — Method in class HasAttributes

Return a decimal as string.

HasAttributes::asDate() — Method in class HasAttributes

Return a timestamp as DateTime object with time set to 00:00:00.

HasAttributes::asDateTime() — Method in class HasAttributes

Return a timestamp as DateTime object.

HasAttributes::asTimestamp() — Method in class HasAttributes

Return a timestamp as unix timestamp.

HasAttributes::append() — Method in class HasAttributes

Append attributes to query when building a query.

HasEvents::addObservableEvents() — Method in class HasEvents

Add an observable event name.

HasGlobalScopes::addGlobalScope() — Method in class HasGlobalScopes

Register a new global scope on the model.

QueriesRelationships::addHasWhere() — Method in class QueriesRelationships

Add the "has" condition where clause to the query.

QueriesRelationships::addWhereCountQuery() — Method in class QueriesRelationships

Add a sub-query count clause to this query.

BelongsToRelationship::attributesFor() — Method in class BelongsToRelationship

Get the parent model attributes and resolvers for the given child model.

$ Factory#afterMakingProperty in class Factory

The "after making" callbacks that will be applied to the model.

$ Factory#afterCreatingProperty in class Factory

The "after creating" callbacks that will be applied to the model.

Factory::afterMaking() — Method in class Factory

Add a new "after making" callback to the model definition.

Factory::afterCreating() — Method in class Factory

Add a new "after creating" callback to the model definition.

Factory::appNamespace() — Method in class Factory

Get the application namespace for the application.

Model::all() — Method in class Model

Get all of the models from the database.

BelongsTo::addConstraints() — Method in class BelongsTo

Set the base constraints on the relation query.

BelongsTo::addEagerConstraints() — Method in class BelongsTo

Set the constraints for an eager load of the relation.

BelongsTo::associate() — Method in class BelongsTo

Associate the model instance to the given parent.

$ BelongsToMany#accessorProperty in class BelongsToMany

The name of the accessor to use for the "pivot" relationship.

BelongsToMany::addConstraints() — Method in class BelongsToMany

Set the base constraints on the relation query.

BelongsToMany::addWhereConstraints() — Method in class BelongsToMany

Set the where clause for the relation query.

BelongsToMany::addEagerConstraints() — Method in class BelongsToMany

Set the constraints for an eager load of the relation.

BelongsToMany::as() — Method in class BelongsToMany

Specify the custom pivot accessor to use for the relationship.

BelongsToMany::aliasedPivotColumns() — Method in class BelongsToMany

Get the pivot columns for the relation.

BelongsToMany::allRelatedIds() — Method in class BelongsToMany

Get all of the IDs for the related models.

AsPivotClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
CanBeOneOfMany::addOneOfManySubQueryConstraints() — Method in class CanBeOneOfMany

Add constraints for inner join subselect for one of many relationships.

CanBeOneOfMany::addOneOfManyJoinSubQueryConstraints() — Method in class CanBeOneOfMany

Add join query constraints for one of many relationships.

CanBeOneOfMany::addOneOfManyJoinSubQuery() — Method in class CanBeOneOfMany

Add the join subquery to the given query on the given column and the relationship's foreign key.

InteractsWithPivotTable::attachNew() — Method in class InteractsWithPivotTable

Attach all of the records that aren't in the given current records.

InteractsWithPivotTable::attach() — Method in class InteractsWithPivotTable

Attach a model to the parent.

InteractsWithPivotTable::attachUsingCustomClass() — Method in class InteractsWithPivotTable

Attach a model to the parent using a custom class.

InteractsWithPivotTable::addTimestampsToAttachment() — Method in class InteractsWithPivotTable

Set the creation and update timestamps on an attach record.

HasManyThrough::addConstraints() — Method in class HasManyThrough

Set the base constraints on the relation query.

HasManyThrough::addEagerConstraints() — Method in class HasManyThrough

Set the constraints for an eager load of the relation.

HasOne::addOneOfManySubQueryConstraints() — Method in class HasOne

Add constraints for inner join subselect for one of many relationships.

HasOne::addOneOfManyJoinSubQueryConstraints() — Method in class HasOne

Add join query constraints for one of many relationships.

HasOneOrMany::addConstraints() — Method in class HasOneOrMany

Set the base constraints on the relation query.

HasOneOrMany::addEagerConstraints() — Method in class HasOneOrMany

Set the constraints for an eager load of the relation.

MorphOne::addOneOfManySubQueryConstraints() — Method in class MorphOne

Add constraints for inner join subselect for one of many relationships.

MorphOne::addOneOfManyJoinSubQueryConstraints() — Method in class MorphOne

Add join query constraints for one of many relationships.

MorphOneOrMany::addConstraints() — Method in class MorphOneOrMany

Set the base constraints on the relation query.

MorphOneOrMany::addEagerConstraints() — Method in class MorphOneOrMany

Set the constraints for an eager load of the relation.

MorphTo::addEagerConstraints() — Method in class MorphTo

Set the constraints for an eager load of the relation.

MorphTo::associate() — Method in class MorphTo

Associate the model instance to the given parent.

MorphToMany::addWhereConstraints() — Method in class MorphToMany

Set the where clause for the relation query.

MorphToMany::addEagerConstraints() — Method in class MorphToMany

Set the constraints for an eager load of the relation.

MorphToMany::aliasedPivotColumns() — Method in class MorphToMany

Get the pivot columns for the relation.

Relation::addConstraints() — Method in class Relation

Set the base constraints on the relation query.

Relation::addEagerConstraints() — Method in class Relation

Set the constraints for an eager load of the relation.

Scope::apply() — Method in class Scope

Apply the scope to a given Eloquent query builder.

SoftDeletingScope::apply() — Method in class SoftDeletingScope

Apply the scope to a given Eloquent query builder.

SoftDeletingScope::addRestore() — Method in class SoftDeletingScope

Add the restore extension to the builder.

SoftDeletingScope::addRestoreOrCreate() — Method in class SoftDeletingScope

Add the restore-or-create extension to the builder.

SoftDeletingScope::addWithTrashed() — Method in class SoftDeletingScope

Add the with-trashed extension to the builder.

SoftDeletingScope::addWithoutTrashed() — Method in class SoftDeletingScope

Add the without-trashed extension to the builder.

SoftDeletingScope::addOnlyTrashed() — Method in class SoftDeletingScope

Add the only-trashed extension to the builder.

MigrationCreator::afterCreate() — Method in class MigrationCreator

Register a post migration create hook.

$ Builder#aggregateProperty in class Builder

An aggregate function and column to be run.

Builder::addSelect() — Method in class Builder

Add a new select column to the query.

Builder::addArrayOfWheres() — Method in class Builder

Add an array of where clauses to the query.

Builder::addDateBasedWhere() — Method in class Builder

Add a date based (year, month, day, time) statement to the query.

Builder::addNestedWhereQuery() — Method in class Builder

Add another query builder as a nested where to the query builder.

Builder::addWhereExistsQuery() — Method in class Builder

Add an exists clause to the query.

Builder::addDynamic() — Method in class Builder

Add a single dynamic where clause statement to the query.

Builder::addNestedHavingQuery() — Method in class Builder

Add another query builder as a nested having to the query builder.

Builder::applyBeforeQueryCallbacks() — Method in class Builder

Invoke the "before query" modification callbacks.

Builder::avg() — Method in class Builder

Retrieve the average of the values of a given column.

Builder::average() — Method in class Builder

Alias for the "avg" method.

Builder::aggregate() — Method in class Builder

Execute an aggregate function on the database.

Builder::addBinding() — Method in class Builder

Add a binding to the query.

$ Blueprint#afterProperty in class Blueprint

The column to add new columns after.

Blueprint::addImpliedCommands() — Method in class Blueprint

Add the commands that are implied by the blueprint's state.

Blueprint::addFluentIndexes() — Method in class Blueprint

Add the index commands fluently specified on columns.

Blueprint::addFluentCommands() — Method in class Blueprint

Add the fluent commands specified on any columns.

Blueprint::addColumn() — Method in class Blueprint

Add a new column to the blueprint.

Blueprint::addColumnDefinition() — Method in class Blueprint

Add a new column definition to the blueprint.

Blueprint::after() — Method in class Blueprint

Add the columns from the callback after the given column.

Blueprint::addCommand() — Method in class Blueprint

Add a new command to the blueprint.

$ Builder#alwaysUsesNativeSchemaOperationsIfPossibleProperty in class Builder

Indicates whether Doctrine DBAL usage will be prevented if possible when dropping, renaming, and modifying columns.

ColumnDefinition::after() — Method in class ColumnDefinition
ColumnDefinition::always() — Method in class ColumnDefinition
ColumnDefinition::autoIncrement() — Method in class ColumnDefinition
Grammar::addModifiers() — Method in class Grammar

Add the column modifiers to the definition.

SQLiteGrammar::addForeignKeys() — Method in class SQLiteGrammar

Get the foreign key syntax for a table creation statement.

SQLiteGrammar::addPrimaryKeys() — Method in class SQLiteGrammar

Get the primary key syntax for a table creation statement.

IndexDefinition::algorithm() — Method in class IndexDefinition
MySqlSchemaState::appendMigrationData() — Method in class MySqlSchemaState

Append the migration data to the schema dump.

SqliteSchemaState::appendMigrationData() — Method in class SqliteSchemaState

Append the migration data to the schema dump.

Dispatcher::addInterfaceListeners() — Method in class Dispatcher

Add the listeners for the event's interfaces to the given array.

AwsS3V3AdapterClass in namespace Illuminate\Filesystem
Filesystem::append() — Method in class Filesystem

Append to a file.

Filesystem::allFiles() — Method in class Filesystem

Get all of the files from the given directory (recursive).

$ FilesystemAdapter#adapterProperty in class FilesystemAdapter

The Flysystem adapter implementation.

FilesystemAdapter::assertExists() — Method in class FilesystemAdapter

Assert that the given file or directory exists.

FilesystemAdapter::assertMissing() — Method in class FilesystemAdapter

Assert that the given file or directory does not exist.

FilesystemAdapter::assertDirectoryEmpty() — Method in class FilesystemAdapter

Assert that the given directory is empty.

FilesystemAdapter::append() — Method in class FilesystemAdapter

Append to a file.

FilesystemAdapter::allFiles() — Method in class FilesystemAdapter

Get all of the files from the given directory (recursive).

FilesystemAdapter::allDirectories() — Method in class FilesystemAdapter

Get all the directories within a given directory (recursive).

$ FilesystemManager#appProperty in class FilesystemManager

The application instance.

AliasLoaderClass in namespace Illuminate\Foundation
$ AliasLoader#aliasesProperty in class AliasLoader

The array of class aliases.

AliasLoader::alias() — Method in class AliasLoader

Add an alias to the loader.

ApplicationClass in namespace Illuminate\Foundation
$ Application#appPathProperty in class Application

The custom application path defined by the developer.

$ Application#absoluteCachePathPrefixesProperty in class Application

The prefixes of absolute cache paths for use during normalization.

Application::afterLoadingEnvironment() — Method in class Application

Register a callback to run after loading the environment.

Application::afterBootstrapping() — Method in class Application

Register a callback to run after a bootstrapper.

Application::addAbsoluteCachePathPrefix() — Method in class Application

Add new prefix to list of absolute path prefixes.

Application::abort() — Method in class Application

Throw an HttpException with the given data.

Application::addDeferredServices() — Method in class Application

Add an array of services to the application's deferred services.

AuthorizableClass in namespace Illuminate\Foundation\Auth\Access
AuthorizesRequestsClass in namespace Illuminate\Foundation\Auth\Access
AuthorizesRequests::authorize() — Method in class AuthorizesRequests

Authorize a given action for the current user.

AuthorizesRequests::authorizeForUser() — Method in class AuthorizesRequests

Authorize a given action for a user.

AuthorizesRequests::authorizeResource() — Method in class AuthorizesRequests

Authorize a resource action based on the incoming request.

EmailVerificationRequest::authorize() — Method in class EmailVerificationRequest

Determine if the user is authorized to make this request.

$ HandleExceptions#appProperty in class HandleExceptions

The application instance.

$ PendingDispatch#afterResponseProperty in class PendingDispatch

Indicates if the job should be dispatched immediately after sending the response.

PendingDispatch::allOnConnection() — Method in class PendingDispatch

Set the desired connection for the chain.

PendingDispatch::allOnQueue() — Method in class PendingDispatch

Set the desired queue for the chain.

PendingDispatch::afterCommit() — Method in class PendingDispatch

Indicate that the job should be dispatched after all database transactions have committed.

PendingDispatch::afterResponse() — Method in class PendingDispatch

Indicate that the job should be dispatched after the response is sent to the browser.

CacheBasedMaintenanceMode::activate() — Method in class CacheBasedMaintenanceMode

Take the application down for maintenance.

CacheBasedMaintenanceMode::active() — Method in class CacheBasedMaintenanceMode

Determine if the application is currently down for maintenance.

$ ResolvesDumpSource#adjustableTracesProperty in class ResolvesDumpSource

Files that require special trace handling and their levels.

AboutCommandClass in namespace Illuminate\Foundation\Console
AboutCommand::add() — Method in class AboutCommand

Add additional data to the output of the "about" command.

AboutCommand::addToSection() — Method in class AboutCommand

Add additional data to the output of the "about" command.

DocsCommand::askForPage() — Method in class DocsCommand

Ask the user which page they would like to open.

DocsCommand::askForPageViaCustomStrategy() — Method in class DocsCommand

Ask the user which page they would like to open via a custom strategy.

DocsCommand::askForPageViaAutocomplete() — Method in class DocsCommand

Ask the user which page they would like to open using autocomplete.

EventListCommand::appendEventInterfaces() — Method in class EventListCommand

Add the event implemented interfaces to the output.

EventListCommand::appendListenerInterfaces() — Method in class EventListCommand

Add the listener implemented interfaces to the output.

EventMakeCommand::alreadyExists() — Method in class EventMakeCommand

Determine if the class already exists.

ExceptionMakeCommand::alreadyExists() — Method in class ExceptionMakeCommand

Determine if the class already exists.

$ Kernel#appProperty in class Kernel

The application implementation.

$ Kernel#artisanProperty in class Kernel

The Artisan application instance.

Kernel::all() — Method in class Kernel

Get all of the commands registered with the console.

ListenerMakeCommand::alreadyExists() — Method in class ListenerMakeCommand

Determine if the class already exists.

ListenerMakeCommand::afterPromptingForMissingArguments() — Method in class ListenerMakeCommand

Interact further with the user if they were prompted for missing arguments.

ModelMakeCommand::afterPromptingForMissingArguments() — Method in class ModelMakeCommand

Interact further with the user if they were prompted for missing arguments.

ObserverMakeCommand::afterPromptingForMissingArguments() — Method in class ObserverMakeCommand

Interact further with the user if they were prompted for missing arguments.

PolicyMakeCommand::afterPromptingForMissingArguments() — Method in class PolicyMakeCommand

Interact further with the user if they were prompted for missing arguments.

RouteListCommand::asJson() — Method in class RouteListCommand

Convert the given routes to JSON.

TestMakeCommand::afterPromptingForMissingArguments() — Method in class TestMakeCommand

Interact further with the user if they were prompted for missing arguments.

PublishingStubs::add() — Method in class PublishingStubs

Add a new stub to be published.

FileBasedMaintenanceMode::activate() — Method in class FileBasedMaintenanceMode

Take the application down for maintenance.

FileBasedMaintenanceMode::active() — Method in class FileBasedMaintenanceMode

Determine if the application is currently down for maintenance.

FormRequest::attributes() — Method in class FormRequest

Get custom attributes for validator errors.

$ Kernel#appProperty in class Kernel

The application implementation.

Kernel::appendMiddlewareToGroup() — Method in class Kernel

Append the given middleware to the given middleware group.

Kernel::appendToMiddlewarePriority() — Method in class Kernel

Append the given middleware to the middleware priority list.

HandlePrecognitiveRequests::appendVaryHeader() — Method in class HandlePrecognitiveRequests

Append the appropriate "Vary" header to the given response.

$ PreventRequestsDuringMaintenance#appProperty in class PreventRequestsDuringMaintenance

The application implementation.

$ VerifyCsrfToken#appProperty in class VerifyCsrfToken

The application instance.

$ VerifyCsrfToken#addHttpCookieProperty in class VerifyCsrfToken

Indicates whether the XSRF-TOKEN cookie should be set on the response.

VerifyCsrfToken::addCookieToResponse() — Method in class VerifyCsrfToken

Add the CSRF token to the response cookies.

PackageManifest::aliases() — Method in class PackageManifest

Get all of the aliases for all packages.

Precognition::afterValidationHook() — Method in class Precognition

Get the "after" validation hook that can be used for precognition requests.

$ ProviderRepository#appProperty in class ProviderRepository

The application implementation.

ArtisanServiceProviderClass in namespace Illuminate\Foundation\Providers
AuthServiceProviderClass in namespace Illuminate\Foundation\Support\Providers
InteractsWithAuthentication::actingAs() — Method in class InteractsWithAuthentication

Set the currently logged in user for the application.

InteractsWithAuthentication::assertAuthenticated() — Method in class InteractsWithAuthentication

Assert that the user is authenticated.

InteractsWithAuthentication::assertGuest() — Method in class InteractsWithAuthentication

Assert that the user is not authenticated.

InteractsWithAuthentication::assertAuthenticatedAs() — Method in class InteractsWithAuthentication

Assert that the user is authenticated as the given user.

InteractsWithAuthentication::assertCredentials() — Method in class InteractsWithAuthentication

Assert that the given credentials are valid.

InteractsWithAuthentication::assertInvalidCredentials() — Method in class InteractsWithAuthentication

Assert that the given credentials are invalid.

InteractsWithConsole::artisan() — Method in class InteractsWithConsole

Call artisan command and return code.

InteractsWithDatabase::assertDatabaseHas() — Method in class InteractsWithDatabase

Assert that a given where condition exists in the database.

InteractsWithDatabase::assertDatabaseMissing() — Method in class InteractsWithDatabase

Assert that a given where condition does not exist in the database.

InteractsWithDatabase::assertDatabaseCount() — Method in class InteractsWithDatabase

Assert the count of table entries.

InteractsWithDatabase::assertDatabaseEmpty() — Method in class InteractsWithDatabase

Assert that the given table has no entries.

InteractsWithDatabase::assertSoftDeleted() — Method in class InteractsWithDatabase

Assert the given record has been "soft deleted".

InteractsWithDatabase::assertNotSoftDeleted() — Method in class InteractsWithDatabase

Assert the given record has not been "soft deleted".

InteractsWithDatabase::assertModelExists() — Method in class InteractsWithDatabase

Assert the given model exists in the database.

InteractsWithDatabase::assertModelMissing() — Method in class InteractsWithDatabase

Assert the given model does not exist in the database.

$ DatabaseTruncation#allTablesProperty in class DatabaseTruncation

The cached names of the database tables for each connection.

RefreshDatabase::afterRefreshingDatabase() — Method in class RefreshDatabase

Perform any work that should take place once the database has finished refreshing.

$ TestCase#appProperty in class TestCase

The Illuminate application instance.

$ TestCase#afterApplicationCreatedCallbacksProperty in class TestCase

The callbacks that should be run after the application is created.

TestCase::afterApplicationCreated() — Method in class TestCase

Register a callback to be run after the application is created.

Vite::asset() — Method in class Vite

Get the URL for an asset.

Vite::assetPath() — Method in class Vite

Generate an asset path for the application.

AbstractHasherClass in namespace Illuminate\Hashing
Argon2IdHasherClass in namespace Illuminate\Hashing
Argon2IdHasher::algorithm() — Method in class Argon2IdHasher

Get the algorithm that should be used for hashing.

ArgonHasherClass in namespace Illuminate\Hashing
ArgonHasher::algorithm() — Method in class ArgonHasher

Get the algorithm that should be used for hashing.

DeterminesStatusCode::accepted() — Method in class DeterminesStatusCode

Determine if the response code was 202 "Accepted" response.

Factory::allowStrayRequests() — Method in class Factory

Indicate that an exception should not be thrown if any request is not faked.

Factory::assertSent() — Method in class Factory

Assert that a request / response pair was recorded matching a given truth test.

Factory::assertSentInOrder() — Method in class Factory

Assert that the given request was sent in the given order.

Factory::assertNotSent() — Method in class Factory

Assert that a request / response pair was not recorded matching a given truth test.

Factory::assertNothingSent() — Method in class Factory

Assert that no request / response pair was recorded.

Factory::assertSentCount() — Method in class Factory

Assert how many requests have been recorded.

Factory::assertSequencesAreEmpty() — Method in class Factory

Assert that every created response sequence is empty.

$ PendingRequest#asyncProperty in class PendingRequest

Whether the requests should be asynchronous.

PendingRequest::asJson() — Method in class PendingRequest

Indicate the request contains JSON.

PendingRequest::asForm() — Method in class PendingRequest

Indicate the request contains form parameters.

PendingRequest::attach() — Method in class PendingRequest

Attach a file to the request.

PendingRequest::asMultipart() — Method in class PendingRequest

Indicate the request is a multi-part form request.

PendingRequest::acceptJson() — Method in class PendingRequest

Indicate that JSON should be returned by the server.

PendingRequest::accept() — Method in class PendingRequest

Indicate the type of content that should be returned by the server.

PendingRequest::async() — Method in class PendingRequest

Toggle asynchronicity in requests.

Pool::as() — Method in class Pool

Add a request to the pool with a key.

Pool::asyncRequest() — Method in class Pool

Retrieve a new async pending request.

InteractsWithContentTypes::accepts() — Method in class InteractsWithContentTypes

Determines whether the current requests accepts a given content type.

InteractsWithContentTypes::acceptsAnyContentType() — Method in class InteractsWithContentTypes

Determine if the current request accepts any content type.

InteractsWithContentTypes::acceptsJson() — Method in class InteractsWithContentTypes

Determines whether a request accepts JSON.

InteractsWithContentTypes::acceptsHtml() — Method in class InteractsWithContentTypes

Determines whether a request accepts HTML.

InteractsWithInput::anyFilled() — Method in class InteractsWithInput

Determine if the request contains a non-empty value for any of the given inputs.

InteractsWithInput::all() — Method in class InteractsWithInput

Get all of the input and files for the request.

InteractsWithInput::allFiles() — Method in class InteractsWithInput

Get an array of all of the files on the request.

AddLinkHeadersForPreloadedAssetsClass in namespace Illuminate\Http\Middleware
$ TrustHosts#appProperty in class TrustHosts

The application instance.

TrustHosts::allSubdomainsOfApplicationUrl() — Method in class TrustHosts

Get a regular expression matching the application URL and all of its subdomains.

Request::ajax() — Method in class Request

Determine if the request is the result of an AJAX call.

ConditionallyLoadsAttributes::attributes() — Method in class ConditionallyLoadsAttributes

Merge the given attributes.

AnonymousResourceCollectionClass in namespace Illuminate\Http\Resources\Json
$ JsonResource#additionalProperty in class JsonResource

The additional meta data that should be added to the resource response.

JsonResource::additional() — Method in class JsonResource

Add additional meta data to the resource response.

$ LogManager#appProperty in class LogManager

The application instance.

LogManager::alert() — Method in class LogManager

Action must be taken immediately.

Logger::alert() — Method in class Logger

Log an alert message to the logs.

ParsesLogConfiguration::actionLevel() — Method in class ParsesLogConfiguration

Parse the action level from the given configuration.

AttachmentClass in namespace Illuminate\Mail
$ Attachment#asProperty in class Attachment

The attached file's filename.

Attachment::as() — Method in class Attachment

Set the attached file's filename.

Attachment::attachWith() — Method in class Attachment

Attach the attachment with the given strategies.

Attachment::attachTo() — Method in class Attachment

Attach the attachment to a built-in mail type.

$ MailManager#appProperty in class MailManager

The application instance.

MailManager::addSesCredentials() — Method in class MailManager

Add the SES credentials to the configuration array.

$ Mailable#attachmentsProperty in class Mailable

The attachments for the message.

$ Mailable#assertionableRenderStringsProperty in class Mailable

The rendered mailable views for testing / assertions.

Mailable::addressesToArray() — Method in class Mailable

Convert the given recipient arguments to an array.

Mailable::attach() — Method in class Mailable

Attach a file to the message.

Mailable::attachMany() — Method in class Mailable

Attach multiple files to the message.

Mailable::attachFromStorage() — Method in class Mailable

Attach a file to the message from storage.

Mailable::attachFromStorageDisk() — Method in class Mailable

Attach a file to the message from storage.

Mailable::attachData() — Method in class Mailable

Attach in-memory data as an attachment.

Mailable::assertFrom() — Method in class Mailable

Assert that the mailable is from the given address.

Mailable::assertTo() — Method in class Mailable

Assert that the mailable has the given recipient.

Mailable::assertHasTo() — Method in class Mailable

Assert that the mailable has the given recipient.

Mailable::assertHasCc() — Method in class Mailable

Assert that the mailable has the given recipient.

Mailable::assertHasBcc() — Method in class Mailable

Assert that the mailable has the given recipient.

Mailable::assertHasReplyTo() — Method in class Mailable

Assert that the mailable has the given "reply to" address.

Mailable::assertHasSubject() — Method in class Mailable

Assert that the mailable has the given subject.

Mailable::assertSeeInHtml() — Method in class Mailable

Assert that the given text is present in the HTML email body.

Mailable::assertDontSeeInHtml() — Method in class Mailable

Assert that the given text is not present in the HTML email body.

Mailable::assertSeeInOrderInHtml() — Method in class Mailable

Assert that the given text strings are present in order in the HTML email body.

Mailable::assertSeeInText() — Method in class Mailable

Assert that the given text is present in the plain-text email body.

Mailable::assertDontSeeInText() — Method in class Mailable

Assert that the given text is not present in the plain-text email body.

Mailable::assertSeeInOrderInText() — Method in class Mailable

Assert that the given text strings are present in order in the plain-text email body.

Mailable::assertHasAttachment() — Method in class Mailable

Assert the mailable has the given attachment.

Mailable::assertHasAttachedData() — Method in class Mailable

Assert the mailable has the given data as an attachment.

Mailable::assertHasAttachmentFromStorage() — Method in class Mailable

Assert the mailable has the given attachment from storage.

Mailable::assertHasAttachmentFromStorageDisk() — Method in class Mailable

Assert the mailable has the given attachment from a specific storage disk.

Mailable::assertHasTag() — Method in class Mailable

Assert that the mailable has the given tag.

Mailable::assertHasMetadata() — Method in class Mailable

Assert that the mailable has the given metadata.

AddressClass in namespace Illuminate\Mail\Mailables
$ Address#addressProperty in class Address

The recipient's email address.

AttachmentClass in namespace Illuminate\Mail\Mailables
Mailer::alwaysFrom() — Method in class Mailer

Set the global from address and name.

Mailer::alwaysReplyTo() — Method in class Mailer

Set the global reply-to address and name.

Mailer::alwaysReturnPath() — Method in class Mailer

Set the global return path address.

Mailer::alwaysTo() — Method in class Mailer

Set the global to address and name.

Mailer::addContent() — Method in class Mailer

Add the content to a given message.

Message::addAddresses() — Method in class Message

Add a recipient to the message.

Message::addAddressDebugHeader() — Method in class Message

Add an address debug header for a list of recipients.

Message::attach() — Method in class Message

Attach a file to the message.

Message::attachData() — Method in class Message

Attach in-memory data as an attachment.

ArrayTransportClass in namespace Illuminate\Mail\Transport
ActionClass in namespace Illuminate\Notifications
AnonymousNotifiableClass in namespace Illuminate\Notifications
MailChannel::additionalMessageData() — Method in class MailChannel

Get additional meta-data to pass along with the view data.

MailChannel::addressMessage() — Method in class MailChannel

Address the mail message.

MailChannel::addSender() — Method in class MailChannel

Add the "from" and "reply to" addresses to the message.

MailChannel::addAttachments() — Method in class MailChannel

Add the attachments to the message.

$ MailMessage#attachmentsProperty in class MailMessage

The attachments for the message.

MailMessage::attach() — Method in class MailMessage

Attach a file to the message.

MailMessage::attachData() — Method in class MailMessage

Attach in-memory data as an attachment.

MailMessage::arrayOfAddresses() — Method in class MailMessage

Determine if the given "address" is actually an array of addresses.

$ SimpleMessage#actionTextProperty in class SimpleMessage

The text / label for the action.

$ SimpleMessage#actionUrlProperty in class SimpleMessage

The action URL.

SimpleMessage::action() — Method in class SimpleMessage

Configure the "call to action" button.

AbstractCursorPaginatorClass in namespace Illuminate\Pagination
AbstractCursorPaginator::appends() — Method in class AbstractCursorPaginator

Add a set of query string values to the paginator.

AbstractCursorPaginator::appendArray() — Method in class AbstractCursorPaginator

Add an array of query string values.

AbstractCursorPaginator::addQuery() — Method in class AbstractCursorPaginator

Add a query string value to the paginator.

AbstractPaginatorClass in namespace Illuminate\Pagination
AbstractPaginator::appends() — Method in class AbstractPaginator

Add a set of query string values to the paginator.

AbstractPaginator::appendArray() — Method in class AbstractPaginator

Add an array of query string values.

AbstractPaginator::addQuery() — Method in class AbstractPaginator

Add a query string value to the paginator.

Factory::assertRan() — Method in class Factory

Assert that a process was recorded matching a given truth test.

Factory::assertRanTimes() — Method in class Factory

Assert that a process was recorded a given number of times matching a given truth test.

Factory::assertNotRan() — Method in class Factory

Assert that a process was not recorded matching a given truth test.

Factory::assertDidntRun() — Method in class Factory

Assert that a process was not recorded matching a given truth test.

Factory::assertNothingRan() — Method in class Factory

Assert that no processes were recorded.

Pool::as() — Method in class Pool

Add a process to the pool with a key.

Manager::addConnection() — Method in class Manager

Register a connection with the manager.

DatabaseFailedJobProvider::all() — Method in class DatabaseFailedJobProvider

Get a list of all of the failed jobs.

DatabaseUuidFailedJobProvider::all() — Method in class DatabaseUuidFailedJobProvider

Get a list of all of the failed jobs.

$ DynamoDbFailedJobProvider#applicationNameProperty in class DynamoDbFailedJobProvider

The application name.

DynamoDbFailedJobProvider::all() — Method in class DynamoDbFailedJobProvider

Get a list of all of the failed jobs.

FailedJobProviderInterface::all() — Method in class FailedJobProviderInterface

Get a list of all of the failed jobs.

NullFailedJobProvider::all() — Method in class NullFailedJobProvider

Get a list of all of the failed jobs.

InteractsWithQueue::attempts() — Method in class InteractsWithQueue

Get the number of times the job has been attempted.

BeanstalkdJob::attempts() — Method in class BeanstalkdJob

Get the number of times the job has been attempted.

DatabaseJob::attempts() — Method in class DatabaseJob

Get the number of times the job has been attempted.

RedisJob::attempts() — Method in class RedisJob

Get the number of times the job has been attempted.

SqsJob::attempts() — Method in class SqsJob

Get the number of times the job has been attempted.

SyncJob::attempts() — Method in class SyncJob

Get the number of times the job has been attempted.

Listener::artisanBinary() — Method in class Listener

Get the Artisan binary.

Listener::addEnvironment() — Method in class Listener

Add the environment option to the given command.

$ QueueManager#appProperty in class QueueManager

The application instance.

QueueManager::after() — Method in class QueueManager

Register an event listener for the after job event.

QueueManager::addConnector() — Method in class QueueManager

Add a queue connection resolver.

ConcurrencyLimiter::acquire() — Method in class ConcurrencyLimiter

Attempt to acquire the lock.

DurationLimiter::acquire() — Method in class DurationLimiter

Attempt to acquire the lock.

DurationLimiterBuilder::allow() — Method in class DurationLimiterBuilder

Set the maximum number of locks that can be obtained per time window.

$ RedisManager#appProperty in class RedisManager

The application instance.

AbstractRouteCollectionClass in namespace Illuminate\Routing
AbstractRouteCollection::addToSymfonyRoutesCollection() — Method in class AbstractRouteCollection

Add a route to the SymfonyRouteCollection instance.

$ CompiledRouteCollection#attributesProperty in class CompiledRouteCollection

An array of the route attributes keyed by name.

CompiledRouteCollection::add() — Method in class CompiledRouteCollection

Add a Route instance to the collection.

ControllerMakeCommand::afterPromptingForMissingArguments() — Method in class ControllerMakeCommand

Interact further with the user if they were prompted for missing arguments.

CreatesRegularExpressionRouteConstraints::assignExpressionToParameters() — Method in class CreatesRegularExpressionRouteConstraints

Apply the given regular expression to the given parameters.

ThrottleRequests::addHeaders() — Method in class ThrottleRequests

Add the limit header information to the given response.

Redirector::away() — Method in class Redirector

Create a new redirect response to an external URL (no validation).

Redirector::action() — Method in class Redirector

Create a new redirect response to a controller action.

ResourceRegistrar::addResourceIndex() — Method in class ResourceRegistrar

Add the index method for a resourceful route.

ResourceRegistrar::addResourceCreate() — Method in class ResourceRegistrar

Add the create method for a resourceful route.

ResourceRegistrar::addResourceStore() — Method in class ResourceRegistrar

Add the store method for a resourceful route.

ResourceRegistrar::addResourceShow() — Method in class ResourceRegistrar

Add the show method for a resourceful route.

ResourceRegistrar::addResourceEdit() — Method in class ResourceRegistrar

Add the edit method for a resourceful route.

ResourceRegistrar::addResourceUpdate() — Method in class ResourceRegistrar

Add the update method for a resourceful route.

ResourceRegistrar::addResourceDestroy() — Method in class ResourceRegistrar

Add the destroy method for a resourceful route.

ResourceRegistrar::addSingletonCreate() — Method in class ResourceRegistrar

Add the create method for a singleton route.

ResourceRegistrar::addSingletonStore() — Method in class ResourceRegistrar

Add the store method for a singleton route.

ResourceRegistrar::addSingletonShow() — Method in class ResourceRegistrar

Add the show method for a singleton route.

ResourceRegistrar::addSingletonEdit() — Method in class ResourceRegistrar

Add the edit method for a singleton route.

ResourceRegistrar::addSingletonUpdate() — Method in class ResourceRegistrar

Add the update method for a singleton route.

ResourceRegistrar::addSingletonDestroy() — Method in class ResourceRegistrar

Add the destroy method for a singleton route.

$ Route#actionProperty in class Route

The route action array.

Route::allowsTrashedBindings() — Method in class Route

Determines if the route allows "trashed" models to be retrieved when resolving implicit model bindings.

Route::addGroupNamespaceToStringUses() — Method in class Route

Parse a string based action for the "uses" fluent method.

$ RouteCollection#allRoutesProperty in class RouteCollection

A flattened array of all of the routes.

$ RouteCollection#actionListProperty in class RouteCollection

A look-up table of routes by controller action.

RouteCollection::add() — Method in class RouteCollection

Add a Route instance to the collection.

RouteCollection::addToCollections() — Method in class RouteCollection

Add the given route to the arrays of routes.

RouteCollection::addLookups() — Method in class RouteCollection

Add the route to any look-up tables if necessary.

RouteCollection::addToActionList() — Method in class RouteCollection

Add a route to the controller action dictionary.

RouteCollectionInterface::add() — Method in class RouteCollectionInterface

Add a Route instance to the collection.

RouteDependencyResolverTrait::alreadyInParameters() — Method in class RouteDependencyResolverTrait

Determine if an object of the given class is in a list of parameters.

$ RouteRegistrar#attributesProperty in class RouteRegistrar

The attributes to pass on to the router.

$ RouteRegistrar#allowedAttributesProperty in class RouteRegistrar

The attributes that can be set through this class.

$ RouteRegistrar#aliasesProperty in class RouteRegistrar

The attributes that are aliased.

RouteRegistrar::attribute() — Method in class RouteRegistrar

Set the value for a given attribute.

RouteRegistrar::apiResource() — Method in class RouteRegistrar

Route an API resource to a controller.

RouteRegistrar::apiSingleton() — Method in class RouteRegistrar

Route an API singleton resource to a controller.

RouteRegistrar::any() — Method in class RouteRegistrar
RouteRegistrar::as() — Method in class RouteRegistrar
RouteUrlGenerator::addPortToDomain() — Method in class RouteUrlGenerator

Add the port to the domain if necessary.

RouteUrlGenerator::addQueryString() — Method in class RouteUrlGenerator

Add a query string to the URI.

Router::any() — Method in class Router

Register a new route responding to all verbs.

Router::apiResources() — Method in class Router

Register an array of API resource controllers.

Router::apiResource() — Method in class Router

Route an API resource to a controller.

Router::apiSingletons() — Method in class Router

Register an array of API singleton resource controllers.

Router::apiSingleton() — Method in class Router

Route an API singleton resource to a controller.

Router::addRoute() — Method in class Router

Add a route to the underlying route collection.

Router::actionReferencesController() — Method in class Router

Determine if the action is routing to a controller.

Router::addWhereClausesToRoute() — Method in class Router

Add the necessary where clauses to the route based on its initial registration.

Router::aliasMiddleware() — Method in class Router

Register a short-hand name for a middleware.

$ UrlGenerator#assetRootProperty in class UrlGenerator

The asset root URL.

UrlGenerator::asset() — Method in class UrlGenerator

Generate the URL to an application asset.

UrlGenerator::assetFrom() — Method in class UrlGenerator

Generate the URL to an asset from a custom root domain such as CDN, etc.

UrlGenerator::action() — Method in class UrlGenerator

Get the URL to a controller action.

ArraySessionHandlerClass in namespace Illuminate\Session
DatabaseSessionHandler::addUserInformation() — Method in class DatabaseSessionHandler

Add the user information to the session payload.

DatabaseSessionHandler::addRequestInformation() — Method in class DatabaseSessionHandler

Add the request information to the session payload.

AuthenticateSessionClass in namespace Illuminate\Session\Middleware
$ AuthenticateSession#authProperty in class AuthenticateSession

The authentication factory implementation.

StartSession::addCookieToResponse() — Method in class StartSession

Add the session cookie to the application response.

$ Store#attributesProperty in class Store

The session attributes.

Store::ageFlashData() — Method in class Store

Age the flash data for the session.

Store::all() — Method in class Store

Get all of the session data.

SymfonySessionDecorator::all() — Method in class SymfonySessionDecorator
{@inheritdoc}
AggregateServiceProviderClass in namespace Illuminate\Support
ArrClass in namespace Illuminate\Support
Arr::accessible() — Method in class Arr

Determine whether the given value is array accessible.

Arr::add() — Method in class Arr

Add an element to an array using "dot" notation if it doesn't exist.

Collection::all() — Method in class Collection
Collection::avg() — Method in class Collection

Get the average value of a given key.

Collection::add() — Method in class Collection

Add an item to the collection.

ConfigurationUrlParser::addDriverAlias() — Method in class ConfigurationUrlParser

Add the given driver alias to the driver aliases array.

Enumerable::all() — Method in class Enumerable

Get all items in the enumerable.

Enumerable::average() — Method in class Enumerable

Alias for the "avg" method.

Enumerable::avg() — Method in class Enumerable

Get the average value of a given key.

AppClass in namespace Illuminate\Support\Facades
App::afterLoadingEnvironment() — Method in class App
App::afterBootstrapping() — Method in class App
App::addAbsoluteCachePathPrefix() — Method in class App
App::abort() — Method in class App
App::addDeferredServices() — Method in class App
App::addContextualBinding() — Method in class App
App::alias() — Method in class App
App::afterResolving() — Method in class App
ArtisanClass in namespace Illuminate\Support\Facades
Artisan::all() — Method in class Artisan
AuthClass in namespace Illuminate\Support\Facades
Auth::attempt() — Method in class Auth
Auth::attemptWhen() — Method in class Auth
Auth::attempting() — Method in class Auth
Auth::authenticate() — Method in class Auth
Blade::anonymousComponentPath() — Method in class Blade
Blade::anonymousComponentNamespace() — Method in class Blade
Blade::aliasComponent() — Method in class Blade
Blade::aliasInclude() — Method in class Blade
Blade::applyEchoHandler() — Method in class Blade
Broadcast::ably() — Method in class Broadcast
Broadcast::auth() — Method in class Broadcast
Bus::assertDispatched() — Method in class Bus
Bus::assertDispatchedTimes() — Method in class Bus
Bus::assertNotDispatched() — Method in class Bus
Bus::assertNothingDispatched() — Method in class Bus
Bus::assertDispatchedSync() — Method in class Bus
Bus::assertDispatchedSyncTimes() — Method in class Bus
Bus::assertNotDispatchedSync() — Method in class Bus
Bus::assertDispatchedAfterResponse() — Method in class Bus
Bus::assertDispatchedAfterResponseTimes() — Method in class Bus
Bus::assertNotDispatchedAfterResponse() — Method in class Bus
Bus::assertChained() — Method in class Bus
Bus::assertDispatchedWithoutChain() — Method in class Bus
Bus::assertBatched() — Method in class Bus
Bus::assertBatchCount() — Method in class Bus
Bus::assertNothingBatched() — Method in class Bus
Cache::add() — Method in class Cache
Config::all() — Method in class Config
DB::availableDrivers() — Method in class DB
DB::affectingStatement() — Method in class DB
DB::allowQueryDurationHandlersToRunAgain() — Method in class DB
DB::afterCommit() — Method in class DB
Event::assertListening() — Method in class Event
Event::assertDispatched() — Method in class Event
Event::assertDispatchedTimes() — Method in class Event
Event::assertNotDispatched() — Method in class Event
Event::assertNothingDispatched() — Method in class Event
$ Facade#appProperty in class Facade

The application instance being facaded.

File::append() — Method in class File
File::allFiles() — Method in class File
Gate::allowIf() — Method in class Gate
Gate::after() — Method in class Gate
Gate::allows() — Method in class Gate
Gate::any() — Method in class Gate
Gate::authorize() — Method in class Gate
Gate::abilities() — Method in class Gate
Http::allowStrayRequests() — Method in class Http
Http::assertSent() — Method in class Http
Http::assertSentInOrder() — Method in class Http
Http::assertNotSent() — Method in class Http
Http::assertNothingSent() — Method in class Http
Http::assertSentCount() — Method in class Http
Http::assertSequencesAreEmpty() — Method in class Http
Http::asJson() — Method in class Http
Http::asForm() — Method in class Http
Http::attach() — Method in class Http
Http::asMultipart() — Method in class Http
Http::acceptJson() — Method in class Http
Http::accept() — Method in class Http
Http::async() — Method in class Http
Lang::addLines() — Method in class Lang
Lang::addNamespace() — Method in class Lang
Lang::addJsonPath() — Method in class Lang
Log::alert() — Method in class Log
Mail::alwaysFrom() — Method in class Mail
Mail::alwaysReplyTo() — Method in class Mail
Mail::alwaysReturnPath() — Method in class Mail
Mail::alwaysTo() — Method in class Mail
Mail::assertSent() — Method in class Mail
Mail::assertNotOutgoing() — Method in class Mail
Mail::assertNotSent() — Method in class Mail
Mail::assertNothingOutgoing() — Method in class Mail
Mail::assertNothingSent() — Method in class Mail
Mail::assertQueued() — Method in class Mail
Mail::assertNotQueued() — Method in class Mail
Mail::assertNothingQueued() — Method in class Mail
Notification::assertSentOnDemand() — Method in class Notification
Notification::assertSentTo() — Method in class Notification
Notification::assertSentOnDemandTimes() — Method in class Notification
Notification::assertSentToTimes() — Method in class Notification
Notification::assertNotSentTo() — Method in class Notification
Notification::assertNothingSent() — Method in class Notification
Notification::assertNothingSentTo() — Method in class Notification
Notification::assertSentTimes() — Method in class Notification
Notification::assertCount() — Method in class Notification
Process::assertRan() — Method in class Process
Process::assertRanTimes() — Method in class Process
Process::assertNotRan() — Method in class Process
Process::assertDidntRun() — Method in class Process
Process::assertNothingRan() — Method in class Process
Queue::after() — Method in class Queue
Queue::addConnector() — Method in class Queue
Queue::assertPushed() — Method in class Queue
Queue::assertPushedOn() — Method in class Queue
Queue::assertPushedWithChain() — Method in class Queue
Queue::assertPushedWithoutChain() — Method in class Queue
Queue::assertClosurePushed() — Method in class Queue
Queue::assertClosureNotPushed() — Method in class Queue
Queue::assertNotPushed() — Method in class Queue
Queue::assertNothingPushed() — Method in class Queue
RateLimiter::attempt() — Method in class RateLimiter
RateLimiter::attempts() — Method in class RateLimiter
RateLimiter::availableIn() — Method in class RateLimiter
Redirect::away() — Method in class Redirect
Redirect::action() — Method in class Redirect
Request::ajax() — Method in class Request
Request::accepts() — Method in class Request
Request::acceptsAnyContentType() — Method in class Request
Request::acceptsJson() — Method in class Request
Request::acceptsHtml() — Method in class Request
Request::anyFilled() — Method in class Request
Request::all() — Method in class Request
Request::allFiles() — Method in class Request
Route::any() — Method in class Route
Route::apiResources() — Method in class Route
Route::apiResource() — Method in class Route
Route::apiSingletons() — Method in class Route
Route::apiSingleton() — Method in class Route
Route::addRoute() — Method in class Route
Route::aliasMiddleware() — Method in class Route
Route::attribute() — Method in class Route
Route::as() — Method in class Route
Session::ageFlashData() — Method in class Session
Session::all() — Method in class Session
Storage::append() — Method in class Storage
Storage::allFiles() — Method in class Storage
Storage::allDirectories() — Method in class Storage
Storage::assertExists() — Method in class Storage
Storage::assertMissing() — Method in class Storage
Storage::assertDirectoryEmpty() — Method in class Storage
URL::asset() — Method in class URL
URL::assetFrom() — Method in class URL
URL::action() — Method in class URL
View::addLocation() — Method in class View
View::addNamespace() — Method in class View
View::addExtension() — Method in class View
View::appendSection() — Method in class View
View::addLoop() — Method in class View
Vite::asset() — Method in class Vite
$ Fluent#attributesProperty in class Fluent
InteractsWithTime::availableAt() — Method in class InteractsWithTime

Get the "available at" UNIX timestamp.

LazyCollection::all() — Method in class LazyCollection
LazyCollection::avg() — Method in class LazyCollection

Get the average value of a given key.

Lottery::alwaysWin() — Method in class Lottery

Force the lottery to always result in a win.

Lottery::alwaysLose() — Method in class Lottery

Force the lottery to always result in a lose.

MessageBag::add() — Method in class MessageBag

Add a message to the message bag.

MessageBag::addIf() — Method in class MessageBag

Add a message to the message bag if the given conditional is "true".

MessageBag::all() — Method in class MessageBag

Get all of the messages for every key in the message bag.

MessageBag::any() — Method in class MessageBag

Determine if the message bag has any messages.

$ MultipleInstanceManager#appProperty in class MultipleInstanceManager

The application instance.

$ ServiceProvider#appProperty in class ServiceProvider

The application instance.

ServiceProvider::addPublishGroup() — Method in class ServiceProvider

Add a publish group / tag to the service provider.

Str::after() — Method in class Str

Return the remainder of a string after the first occurrence of a given value.

Str::afterLast() — Method in class Str

Return the remainder of a string after the last occurrence of a given value.

Str::ascii() — Method in class Str

Transliterate a UTF-8 value to ASCII.

Stringable::after() — Method in class Stringable

Return the remainder of a string after the first occurrence of a given value.

Stringable::afterLast() — Method in class Stringable

Return the remainder of a string after the last occurrence of a given value.

Stringable::append() — Method in class Stringable

Append the given values to the string.

Stringable::ascii() — Method in class Stringable

Transliterate a UTF-8 value to ASCII.

$ BatchFake#addedProperty in class BatchFake

The jobs that have been added to the batch.

BatchFake::add() — Method in class BatchFake

Add additional jobs to the batch.

BusFake::assertDispatched() — Method in class BusFake

Assert if a job was dispatched based on a truth-test callback.

BusFake::assertDispatchedTimes() — Method in class BusFake

Assert if a job was pushed a number of times.

BusFake::assertNotDispatched() — Method in class BusFake

Determine if a job was dispatched based on a truth-test callback.

BusFake::assertNothingDispatched() — Method in class BusFake

Assert that no jobs were dispatched.

BusFake::assertDispatchedSync() — Method in class BusFake

Assert if a job was explicitly dispatched synchronously based on a truth-test callback.

BusFake::assertDispatchedSyncTimes() — Method in class BusFake

Assert if a job was pushed synchronously a number of times.

BusFake::assertNotDispatchedSync() — Method in class BusFake

Determine if a job was dispatched based on a truth-test callback.

BusFake::assertDispatchedAfterResponse() — Method in class BusFake

Assert if a job was dispatched after the response was sent based on a truth-test callback.

BusFake::assertDispatchedAfterResponseTimes() — Method in class BusFake

Assert if a job was pushed after the response was sent a number of times.

BusFake::assertNotDispatchedAfterResponse() — Method in class BusFake

Determine if a job was dispatched based on a truth-test callback.

BusFake::assertChained() — Method in class BusFake

Assert if a chain of jobs was dispatched.

BusFake::assertDispatchedWithoutChain() — Method in class BusFake

Assert if a job was dispatched with an empty chain based on a truth-test callback.

BusFake::assertDispatchedWithChainOfObjects() — Method in class BusFake

Assert if a job was dispatched with chained jobs based on a truth-test callback.

BusFake::assertDispatchedWithChainOfClasses() — Method in class BusFake

Assert if a job was dispatched with chained jobs based on a truth-test callback.

BusFake::assertBatched() — Method in class BusFake

Assert if a batch was dispatched based on a truth-test callback.

BusFake::assertBatchCount() — Method in class BusFake

Assert the number of batches that have been dispatched.

BusFake::assertNothingBatched() — Method in class BusFake

Assert that no batched jobs were dispatched.

EventFake::assertListening() — Method in class EventFake

Assert if an event has a listener attached to it.

EventFake::assertDispatched() — Method in class EventFake

Assert if an event was dispatched based on a truth-test callback.

EventFake::assertDispatchedTimes() — Method in class EventFake

Assert if an event was dispatched a number of times.

EventFake::assertNotDispatched() — Method in class EventFake

Determine if an event was dispatched based on a truth-test callback.

EventFake::assertNothingDispatched() — Method in class EventFake

Assert that no events were dispatched.

MailFake::assertSent() — Method in class MailFake

Assert if a mailable was sent based on a truth-test callback.

MailFake::assertSentTimes() — Method in class MailFake

Assert if a mailable was sent a number of times.

MailFake::assertNotOutgoing() — Method in class MailFake

Determine if a mailable was not sent or queued to be sent based on a truth-test callback.

MailFake::assertNotSent() — Method in class MailFake

Determine if a mailable was not sent based on a truth-test callback.

MailFake::assertNothingOutgoing() — Method in class MailFake

Assert that no mailables were sent or queued to be sent.

MailFake::assertNothingSent() — Method in class MailFake

Assert that no mailables were sent.

MailFake::assertQueued() — Method in class MailFake

Assert if a mailable was queued based on a truth-test callback.

MailFake::assertQueuedTimes() — Method in class MailFake

Assert if a mailable was queued a number of times.

MailFake::assertNotQueued() — Method in class MailFake

Determine if a mailable was not queued based on a truth-test callback.

MailFake::assertNothingQueued() — Method in class MailFake

Assert that no mailables were queued.

NotificationFake::assertSentOnDemand() — Method in class NotificationFake

Assert if a notification was sent on-demand based on a truth-test callback.

NotificationFake::assertSentTo() — Method in class NotificationFake

Assert if a notification was sent based on a truth-test callback.

NotificationFake::assertSentOnDemandTimes() — Method in class NotificationFake

Assert if a notification was sent on-demand a number of times.

NotificationFake::assertSentToTimes() — Method in class NotificationFake

Assert if a notification was sent a number of times.

NotificationFake::assertNotSentTo() — Method in class NotificationFake

Determine if a notification was sent based on a truth-test callback.

NotificationFake::assertNothingSent() — Method in class NotificationFake

Assert that no notifications were sent.

NotificationFake::assertNothingSentTo() — Method in class NotificationFake

Assert that no notifications were sent to the given notifiable.

NotificationFake::assertSentTimes() — Method in class NotificationFake

Assert the total amount of times a notification was sent.

NotificationFake::assertCount() — Method in class NotificationFake

Assert the total count of notification that were sent.

QueueFake::assertPushed() — Method in class QueueFake

Assert if a job was pushed based on a truth-test callback.

QueueFake::assertPushedTimes() — Method in class QueueFake

Assert if a job was pushed a number of times.

QueueFake::assertPushedOn() — Method in class QueueFake

Assert if a job was pushed based on a truth-test callback.

QueueFake::assertPushedWithChain() — Method in class QueueFake

Assert if a job was pushed with chained jobs based on a truth-test callback.

QueueFake::assertPushedWithoutChain() — Method in class QueueFake

Assert if a job was pushed with an empty chain based on a truth-test callback.

QueueFake::assertPushedWithChainOfObjects() — Method in class QueueFake

Assert if a job was pushed with chained jobs based on a truth-test callback.

QueueFake::assertPushedWithChainOfClasses() — Method in class QueueFake

Assert if a job was pushed with chained jobs based on a truth-test callback.

QueueFake::assertClosurePushed() — Method in class QueueFake

Assert if a closure was pushed based on a truth-test callback.

QueueFake::assertClosureNotPushed() — Method in class QueueFake

Assert that a closure was not pushed based on a truth-test callback.

QueueFake::assertNotPushed() — Method in class QueueFake

Determine if a job was pushed based on a truth-test callback.

QueueFake::assertNothingPushed() — Method in class QueueFake

Assert that no jobs were pushed.

$ EnumeratesValues#averageProperty in class EnumeratesValues
$ EnumeratesValues#avgProperty in class EnumeratesValues
EnumeratesValues::average() — Method in class EnumeratesValues

Alias for the "avg" method.

ValidatedInput::all() — Method in class ValidatedInput

Get the raw, underlying input array.

ViewErrorBag::any() — Method in class ViewErrorBag

Determine if the default message bag has any messages.

AssertClass in namespace Illuminate\Testing
Assert::assertArraySubset() — Method in class Assert

Asserts that an array has a specified subset.

AssertableJsonStringClass in namespace Illuminate\Testing
AssertableJsonString::assertCount() — Method in class AssertableJsonString

Assert that the response JSON has the expected count of items at the given key.

AssertableJsonString::assertExact() — Method in class AssertableJsonString

Assert that the response has the exact given JSON.

AssertableJsonString::assertSimilar() — Method in class AssertableJsonString

Assert that the response has the similar JSON as given.

AssertableJsonString::assertFragment() — Method in class AssertableJsonString

Assert that the response contains the given JSON fragment.

AssertableJsonString::assertMissing() — Method in class AssertableJsonString

Assert that the response does not contain the given JSON fragment.

AssertableJsonString::assertMissingExact() — Method in class AssertableJsonString

Assert that the response does not contain the exact JSON fragment.

AssertableJsonString::assertMissingPath() — Method in class AssertableJsonString

Assert that the response does not contain the given path.

AssertableJsonString::assertPath() — Method in class AssertableJsonString

Assert that the expected value and type exists at the given path in the response.

AssertableJsonString::assertStructure() — Method in class AssertableJsonString

Assert that the response has a given JSON structure.

AssertableJsonString::assertSubset() — Method in class AssertableJsonString

Assert that the response is a superset of the given JSON.

AssertableJsonString::assertJsonMessage() — Method in class AssertableJsonString

Get the assertion message for assertJson.

AssertsStatusCodesClass in namespace Illuminate\Testing\Concerns
AssertsStatusCodes::assertOk() — Method in class AssertsStatusCodes

Assert that the response has a 200 "OK" status code.

AssertsStatusCodes::assertCreated() — Method in class AssertsStatusCodes

Assert that the response has a 201 "Created" status code.

AssertsStatusCodes::assertAccepted() — Method in class AssertsStatusCodes

Assert that the response has a 202 "Accepted" status code.

AssertsStatusCodes::assertNoContent() — Method in class AssertsStatusCodes

Assert that the response has the given status code and no content.

AssertsStatusCodes::assertMovedPermanently() — Method in class AssertsStatusCodes

Assert that the response has a 301 "Moved Permanently" status code.

AssertsStatusCodes::assertFound() — Method in class AssertsStatusCodes

Assert that the response has a 302 "Found" status code.

AssertsStatusCodes::assertBadRequest() — Method in class AssertsStatusCodes

Assert that the response has a 400 "Bad Request" status code.

AssertsStatusCodes::assertUnauthorized() — Method in class AssertsStatusCodes

Assert that the response has a 401 "Unauthorized" status code.

AssertsStatusCodes::assertPaymentRequired() — Method in class AssertsStatusCodes

Assert that the response has a 402 "Payment Required" status code.

AssertsStatusCodes::assertForbidden() — Method in class AssertsStatusCodes

Assert that the response has a 403 "Forbidden" status code.

AssertsStatusCodes::assertNotFound() — Method in class AssertsStatusCodes

Assert that the response has a 404 "Not Found" status code.

AssertsStatusCodes::assertRequestTimeout() — Method in class AssertsStatusCodes

Assert that the response has a 408 "Request Timeout" status code.

AssertsStatusCodes::assertConflict() — Method in class AssertsStatusCodes

Assert that the response has a 409 "Conflict" status code.

AssertsStatusCodes::assertUnsupportedMediaType() — Method in class AssertsStatusCodes

Assert that the response has a 415 "Unsupported Media Type" status code.

AssertsStatusCodes::assertUnprocessable() — Method in class AssertsStatusCodes

Assert that the response has a 422 "Unprocessable Entity" status code.

AssertsStatusCodes::assertTooManyRequests() — Method in class AssertsStatusCodes

Assert that the response has a 429 "Too Many Requests" status code.

$ RunsInParallel#applicationResolverProperty in class RunsInParallel

The application resolver callback.

ArraySubsetClass in namespace Illuminate\Testing\Constraints
$ CountInDatabase#actualCountProperty in class CountInDatabase

The actual table entries count that will be checked against the expected count.

AssertableJsonClass in namespace Illuminate\Testing\Fluent
$ PendingCommand#appProperty in class PendingCommand

The application instance.

PendingCommand::assertExitCode() — Method in class PendingCommand

Assert that the command has the given exit code.

PendingCommand::assertNotExitCode() — Method in class PendingCommand

Assert that the command does not have the given exit code.

PendingCommand::assertSuccessful() — Method in class PendingCommand

Assert that the command has the success exit code.

PendingCommand::assertOk() — Method in class PendingCommand

Assert that the command has the success exit code.

PendingCommand::assertFailed() — Method in class PendingCommand

Assert that the command does not have the success exit code.

TestComponent::assertSee() — Method in class TestComponent

Assert that the given string is contained within the rendered component.

TestComponent::assertSeeInOrder() — Method in class TestComponent

Assert that the given strings are contained in order within the rendered component.

TestComponent::assertSeeText() — Method in class TestComponent

Assert that the given string is contained within the rendered component text.

TestComponent::assertSeeTextInOrder() — Method in class TestComponent

Assert that the given strings are contained in order within the rendered component text.

TestComponent::assertDontSee() — Method in class TestComponent

Assert that the given string is not contained within the rendered component.

TestComponent::assertDontSeeText() — Method in class TestComponent

Assert that the given string is not contained within the rendered component text.

TestResponse::assertSuccessful() — Method in class TestResponse

Assert that the response has a successful status code.

TestResponse::assertServerError() — Method in class TestResponse

Assert that the response is a server error.

TestResponse::assertStatus() — Method in class TestResponse

Assert that the response has the given status code.

TestResponse::assertRedirect() — Method in class TestResponse

Assert whether the response is redirecting to a given URI.

TestResponse::assertRedirectContains() — Method in class TestResponse

Assert whether the response is redirecting to a URI that contains the given URI.

TestResponse::assertRedirectToRoute() — Method in class TestResponse

Assert whether the response is redirecting to a given route.

TestResponse::assertRedirectToSignedRoute() — Method in class TestResponse

Assert whether the response is redirecting to a given signed route.

TestResponse::assertHeader() — Method in class TestResponse

Asserts that the response contains the given header and equals the optional value.

TestResponse::assertHeaderMissing() — Method in class TestResponse

Asserts that the response does not contain the given header.

TestResponse::assertLocation() — Method in class TestResponse

Assert that the current location header matches the given URI.

TestResponse::assertDownload() — Method in class TestResponse

Assert that the response offers a file download.

TestResponse::assertPlainCookie() — Method in class TestResponse

Asserts that the response contains the given cookie and equals the optional value.

TestResponse::assertCookie() — Method in class TestResponse

Asserts that the response contains the given cookie and equals the optional value.

TestResponse::assertCookieExpired() — Method in class TestResponse

Asserts that the response contains the given cookie and is expired.

TestResponse::assertCookieNotExpired() — Method in class TestResponse

Asserts that the response contains the given cookie and is not expired.

TestResponse::assertCookieMissing() — Method in class TestResponse

Asserts that the response does not contain the given cookie.

TestResponse::assertContent() — Method in class TestResponse

Assert that the given string matches the response content.

TestResponse::assertStreamedContent() — Method in class TestResponse

Assert that the given string matches the streamed response content.

TestResponse::assertSee() — Method in class TestResponse

Assert that the given string or array of strings are contained within the response.

TestResponse::assertSeeInOrder() — Method in class TestResponse

Assert that the given strings are contained in order within the response.

TestResponse::assertSeeText() — Method in class TestResponse

Assert that the given string or array of strings are contained within the response text.

TestResponse::assertSeeTextInOrder() — Method in class TestResponse

Assert that the given strings are contained in order within the response text.

TestResponse::assertDontSee() — Method in class TestResponse

Assert that the given string or array of strings are not contained within the response.

TestResponse::assertDontSeeText() — Method in class TestResponse

Assert that the given string or array of strings are not contained within the response text.

TestResponse::assertJson() — Method in class TestResponse

Assert that the response is a superset of the given JSON.

TestResponse::assertJsonPath() — Method in class TestResponse

Assert that the expected value and type exists at the given path in the response.

TestResponse::assertExactJson() — Method in class TestResponse

Assert that the response has the exact given JSON.

TestResponse::assertSimilarJson() — Method in class TestResponse

Assert that the response has the similar JSON as given.

TestResponse::assertJsonFragment() — Method in class TestResponse

Assert that the response contains the given JSON fragment.

TestResponse::assertJsonMissing() — Method in class TestResponse

Assert that the response does not contain the given JSON fragment.

TestResponse::assertJsonMissingExact() — Method in class TestResponse

Assert that the response does not contain the exact JSON fragment.

TestResponse::assertJsonMissingPath() — Method in class TestResponse

Assert that the response does not contain the given path.

TestResponse::assertJsonStructure() — Method in class TestResponse

Assert that the response has a given JSON structure.

TestResponse::assertJsonCount() — Method in class TestResponse

Assert that the response JSON has the expected count of items at the given key.

TestResponse::assertJsonValidationErrors() — Method in class TestResponse

Assert that the response has the given JSON validation errors.

TestResponse::assertJsonValidationErrorFor() — Method in class TestResponse

Assert the response has any JSON validation errors for the given key.

TestResponse::assertJsonMissingValidationErrors() — Method in class TestResponse

Assert that the response has no JSON validation errors for the given keys.

TestResponse::assertJsonIsArray() — Method in class TestResponse

Assert that the given key is a JSON array.

TestResponse::assertJsonIsObject() — Method in class TestResponse

Assert that the given key is a JSON object.

TestResponse::assertViewIs() — Method in class TestResponse

Assert that the response view equals the given value.

TestResponse::assertViewHas() — Method in class TestResponse

Assert that the response view has a given piece of bound data.

TestResponse::assertViewHasAll() — Method in class TestResponse

Assert that the response view has a given list of bound data.

TestResponse::assertViewMissing() — Method in class TestResponse

Assert that the response view is missing a piece of bound data.

TestResponse::assertValid() — Method in class TestResponse

Assert that the given keys do not have validation errors.

TestResponse::assertInvalid() — Method in class TestResponse

Assert that the response has the given validation errors.

TestResponse::assertSessionHas() — Method in class TestResponse

Assert that the session has a given value.

TestResponse::assertSessionHasAll() — Method in class TestResponse

Assert that the session has a given list of values.

TestResponse::assertSessionHasInput() — Method in class TestResponse

Assert that the session has a given value in the flashed input array.

TestResponse::assertSessionHasErrors() — Method in class TestResponse

Assert that the session has the given errors.

TestResponse::assertSessionDoesntHaveErrors() — Method in class TestResponse

Assert that the session is missing the given errors.

TestResponse::assertSessionHasNoErrors() — Method in class TestResponse

Assert that the session has no errors.

TestResponse::assertSessionHasErrorsIn() — Method in class TestResponse

Assert that the session has the given errors.

TestResponse::assertSessionMissing() — Method in class TestResponse

Assert that the session does not have a given key.

TestResponse::appendExceptionToException() — Method in class TestResponse

Append an exception to the message of another exception.

TestResponse::appendErrorsToException() — Method in class TestResponse

Append errors to an exception message.

TestResponse::appendMessageToException() — Method in class TestResponse

Append a message to an exception.

TestView::assertViewHas() — Method in class TestView

Assert that the response view has a given piece of bound data.

TestView::assertViewHasAll() — Method in class TestView

Assert that the response view has a given list of bound data.

TestView::assertViewMissing() — Method in class TestView

Assert that the response view is missing a piece of bound data.

TestView::assertSee() — Method in class TestView

Assert that the given string is contained within the view.

TestView::assertSeeInOrder() — Method in class TestView

Assert that the given strings are contained in order within the view.

TestView::assertSeeText() — Method in class TestView

Assert that the given string is contained within the view text.

TestView::assertSeeTextInOrder() — Method in class TestView

Assert that the given strings are contained in order within the view text.

TestView::assertDontSee() — Method in class TestView

Assert that the given string is not contained within the view.

TestView::assertDontSeeText() — Method in class TestView

Assert that the given string is not contained within the view text.

ArrayLoaderClass in namespace Illuminate\Translation
ArrayLoader::addNamespace() — Method in class ArrayLoader

Add a new namespace to the loader.

ArrayLoader::addJsonPath() — Method in class ArrayLoader

Add a new JSON path to the loader.

ArrayLoader::addMessages() — Method in class ArrayLoader

Add messages to the loader.

FileLoader::addNamespace() — Method in class FileLoader

Add a new namespace to the loader.

FileLoader::addJsonPath() — Method in class FileLoader

Add a new JSON path to the loader.

Translator::addLines() — Method in class Translator

Add translation lines to the given locale.

Translator::addNamespace() — Method in class Translator

Add a new namespace to the loader.

Translator::addJsonPath() — Method in class Translator

Add a new JSON path to the loader.

ValidatesAttributes::anyFailingRequired() — Method in class ValidatesAttributes

Determine if any of the given attributes fail the required test.

ValidatesAttributes::allFailingRequired() — Method in class ValidatesAttributes

Determine if all of the given attributes fail the required test.

DatabasePresenceVerifier::addConditions() — Method in class DatabasePresenceVerifier

Add the given conditions to the query.

DatabasePresenceVerifier::addWhere() — Method in class DatabasePresenceVerifier

Add a "where" clause to the given query.

Factory::addExtensions() — Method in class Factory

Add the extensions to a validator instance.

$ File#allowedMimetypesProperty in class File

The MIME types that the given file should match. This array may also contain file extensions.

$ Validator#afterProperty in class Validator

All of the registered "after" callbacks.

Validator::after() — Method in class Validator

Add an after validation callback.

Validator::addFailure() — Method in class Validator

Add a failed rule and error message to the collection.

Validator::attributesThatHaveMessages() — Method in class Validator

Generate an array of all attributes that have messages.

Validator::attributes() — Method in class Validator

Get the data under validation.

Validator::addRules() — Method in class Validator

Parse the given rules and merge them into current rules.

Validator::addExtensions() — Method in class Validator

Register an array of custom validator extensions.

Validator::addImplicitExtensions() — Method in class Validator

Register an array of custom implicit validator extensions.

Validator::addDependentExtensions() — Method in class Validator

Register an array of custom dependent validator extensions.

Validator::addExtension() — Method in class Validator

Register a custom validator extension.

Validator::addImplicitExtension() — Method in class Validator

Register a custom implicit validator extension.

Validator::addDependentExtension() — Method in class Validator

Register a custom dependent validator extension.

Validator::addReplacers() — Method in class Validator

Register an array of custom validator message replacers.

Validator::addReplacer() — Method in class Validator

Register a custom validator message replacer.

Validator::addCustomAttributes() — Method in class Validator

Add custom attributes to the validator.

Validator::addCustomValues() — Method in class Validator

Add the custom values for the validator.

AnonymousComponentClass in namespace Illuminate\View
AppendableAttributeValueClass in namespace Illuminate\View
$ BladeCompiler#anonymousComponentPathsProperty in class BladeCompiler

The array of anonymous component paths to search for components in.

$ BladeCompiler#anonymousComponentNamespacesProperty in class BladeCompiler

The array of anonymous component namespaces to autoload from.

BladeCompiler::appendFilePath() — Method in class BladeCompiler

Append the file path to the compiled string.

$ ComponentTagCompiler#aliasesProperty in class ComponentTagCompiler

The component class aliases.

ComponentTagCompiler::attributesToString() — Method in class ComponentTagCompiler

Convert an array of attributes to a string.

CompilesEchos::addBladeCompilerVariable() — Method in class CompilesEchos

Add an instance of the blade echo handler to the start of the compiled string.

CompilesEchos::applyEchoHandler() — Method in class CompilesEchos

Apply the echo handler for the value if it exists.

$ Component#attributesProperty in class Component

The component attributes.

$ ComponentAttributeBag#attributesProperty in class ComponentAttributeBag

The raw array of attributes.

$ ComponentSlot#attributesProperty in class ComponentSlot

The slot attribute bag.

ManagesEvents::addViewEvent() — Method in class ManagesEvents

Add an event for a given view.

ManagesEvents::addClassEvent() — Method in class ManagesEvents

Register a class based view composer.

ManagesEvents::addEventListener() — Method in class ManagesEvents

Add a listener to the event dispatcher.

ManagesLayouts::appendSection() — Method in class ManagesLayouts

Stop injecting content into a section and append it.

ManagesLoops::addLoop() — Method in class ManagesLoops

Add new loop to the stack.

Factory::addLocation() — Method in class Factory

Add a location to the array of view locations.

Factory::addNamespace() — Method in class Factory

Add a new namespace to the loader.

Factory::addExtension() — Method in class Factory

Register a valid view extension and its engine.

FileViewFinder::addLocation() — Method in class FileViewFinder

Add a location to the finder.

FileViewFinder::addNamespace() — Method in class FileViewFinder

Add a namespace hint to the finder.

FileViewFinder::addExtension() — Method in class FileViewFinder

Register an extension with the view finder.

ViewFinderInterface::addLocation() — Method in class ViewFinderInterface

Add a location to the finder.

ViewFinderInterface::addNamespace() — Method in class ViewFinderInterface

Add a namespace hint to the finder.

ViewFinderInterface::addExtension() — Method in class ViewFinderInterface

Add a valid view extension to the finder.

B

$ Gate#beforeCallbacksProperty in class Gate

All of the registered before callbacks.

Gate::buildAbilityCallback() — Method in class Gate

Create the ability callback for a callback string.

Gate::before() — Method in class Gate

Register a callback to run before all Gate checks.

ResetPassword::buildMailMessage() — Method in class ResetPassword

Get the reset password notification mail message for the given URL.

VerifyEmail::buildMailMessage() — Method in class VerifyEmail

Get the verify email notification mail message for the given URL.

$ PasswordBrokerManager#brokersProperty in class PasswordBrokerManager

The array of created "drivers".

PasswordBrokerManager::broker() — Method in class PasswordBrokerManager

Attempt to get the broker from the local cache.

SessionGuard::basic() — Method in class SessionGuard

Attempt to authenticate using HTTP Basic Auth.

SessionGuard::basicCredentials() — Method in class SessionGuard

Get the credential array for an HTTP Basic request.

BroadcastControllerClass in namespace Illuminate\Broadcasting
BroadcastEventClass in namespace Illuminate\Broadcasting
$ BroadcastEvent#backoffProperty in class BroadcastEvent

The number of seconds to wait before retrying the job when encountering an uncaught exception.

BroadcastExceptionClass in namespace Illuminate\Broadcasting
BroadcastManagerClass in namespace Illuminate\Broadcasting
BroadcastServiceProviderClass in namespace Illuminate\Broadcasting
AblyBroadcaster::broadcast() — Method in class AblyBroadcaster

Broadcast the given event.

AblyBroadcaster::buildAblyMessage() — Method in class AblyBroadcaster

Build an Ably message object for broadcasting.

BroadcasterClass in namespace Illuminate\Broadcasting\Broadcasters
$ Broadcaster#bindingRegistrarProperty in class Broadcaster

The binding registrar instance.

Broadcaster::binder() — Method in class Broadcaster

Get the model binding registrar instance.

LogBroadcaster::broadcast() — Method in class LogBroadcaster

Broadcast the given event.

NullBroadcaster::broadcast() — Method in class NullBroadcaster

Broadcast the given event.

PusherBroadcaster::broadcast() — Method in class PusherBroadcaster

Broadcast the given event.

RedisBroadcaster::broadcast() — Method in class RedisBroadcaster

Broadcast the given event.

RedisBroadcaster::broadcastMultipleChannelsScript() — Method in class RedisBroadcaster

Get the Lua script for broadcasting to multiple channels.

$ InteractsWithBroadcasting#broadcastConnectionProperty in class InteractsWithBroadcasting

The broadcaster connection to use to broadcast the event.

InteractsWithBroadcasting::broadcastVia() — Method in class InteractsWithBroadcasting

Broadcast the event using a specific broadcaster.

InteractsWithBroadcasting::broadcastConnections() — Method in class InteractsWithBroadcasting

Get the broadcaster connections the event should be broadcast on.

InteractsWithSockets::broadcastToEveryone() — Method in class InteractsWithSockets

Broadcast the event to everyone.

BatchClass in namespace Illuminate\Bus
BatchFactoryClass in namespace Illuminate\Bus
BatchRepositoryClass in namespace Illuminate\Bus
BatchableClass in namespace Illuminate\Bus
$ Batchable#batchIdProperty in class Batchable

The batch ID (if applicable).

Batchable::batch() — Method in class Batchable

Get the batch instance for the job, if applicable.

Batchable::batching() — Method in class Batchable

Determine if the batch is still active and processing.

BusServiceProviderClass in namespace Illuminate\Bus
Dispatcher::batch() — Method in class Dispatcher

Create a new batch of queueable jobs.

BatchDispatchedClass in namespace Illuminate\Bus\Events
$ BatchDispatched#batchProperty in class BatchDispatched

The batch instance.

Queueable::beforeCommit() — Method in class Queueable

Indicate that the job should not wait until database transactions have been committed before dispatching.

Lock::block() — Method in class Lock

Attempt to acquire the lock for the given number of seconds.

Lock::betweenBlockedAttemptsSleepFor() — Method in class Lock

Specify the number of milliseconds to sleep in between blocked lock acquisition attempts.

Limit::by() — Method in class Limit

Set the key of the rate limit.

$ Application#bootstrappersProperty in class Application

The console application bootstrappers.

Application::bootstrap() — Method in class Application

Bootstrap the console application.

BufferedConsoleOutputClass in namespace Illuminate\Console
$ BufferedConsoleOutput#bufferProperty in class BufferedConsoleOutput

The current buffer.

GeneratorCommand::buildClass() — Method in class GeneratorCommand

Build the class with the given name.

CommandBuilder::buildCommand() — Method in class CommandBuilder

Build the command for the given event.

CommandBuilder::buildForegroundCommand() — Method in class CommandBuilder

Build the command for running the event in the foreground.

CommandBuilder::buildBackgroundCommand() — Method in class CommandBuilder

Build the command for running the event in the background.

$ Event#beforeCallbacksProperty in class Event

The array of callbacks to be run before the event is started.

Event::buildCommand() — Method in class Event

Build the command string.

Event::before() — Method in class Event

Register a callback to be called before the operation.

ManagesFrequencies::between() — Method in class ManagesFrequencies

Schedule the event to run between start and end time.

BulletListClass in namespace Illuminate\Console\View\Components
Factory::bulletList() — Method in class Factory
BoundMethodClass in namespace Illuminate\Container
$ Container#bindingsProperty in class Container

The container's bindings.

$ Container#buildStackProperty in class Container

The stack of concretions currently being built.

$ Container#beforeResolvingCallbacksProperty in class Container

All of the before resolving callbacks by class type.

Container::bound() — Method in class Container

Determine if the given abstract type has been bound.

Container::bind() — Method in class Container

Register a binding with the container.

Container::bindMethod() — Method in class Container

Bind a callback to resolve with Container::call.

Container::bindIf() — Method in class Container

Register a binding if it hasn't already been registered.

Container::build() — Method in class Container

Instantiate a concrete instance of the given type.

Container::beforeResolving() — Method in class Container

Register a new before resolving callback for all types.

Gate::before() — Method in class Gate

Register a callback to run before all Gate checks.

PasswordBrokerFactory::broker() — Method in class PasswordBrokerFactory

Get a password broker instance by name.

SupportsBasicAuth::basic() — Method in class SupportsBasicAuth

Attempt to authenticate using HTTP Basic Auth.

BroadcasterClass in namespace Illuminate\Contracts\Broadcasting
Broadcaster::broadcast() — Method in class Broadcaster

Broadcast the given event.

HasBroadcastChannel::broadcastChannelRoute() — Method in class HasBroadcastChannel

Get the broadcast channel route definition that is associated with the given entity.

HasBroadcastChannel::broadcastChannel() — Method in class HasBroadcastChannel

Get the broadcast channel name that is associated with the given entity.

ShouldBroadcast::broadcastOn() — Method in class ShouldBroadcast

Get the channels the event should broadcast on.

QueueingDispatcher::batch() — Method in class QueueingDispatcher

Create a new batch of queueable jobs.

Lock::block() — Method in class Lock

Attempt to acquire the lock for the given number of seconds.

Kernel::bootstrap() — Method in class Kernel

Bootstrap the application for artisan commands.

BindingResolutionExceptionClass in namespace Illuminate\Contracts\Container
Container::bound() — Method in class Container

Determine if the given abstract type has been bound.

Container::bind() — Method in class Container

Register a binding with the container.

Container::bindMethod() — Method in class Container

Bind a callback to resolve with Container::call.

Container::bindIf() — Method in class Container

Register a binding if it hasn't already been registered.

Container::beforeResolving() — Method in class Container

Register a new before resolving callback.

BuilderClass in namespace Illuminate\Contracts\Database\Eloquent

This interface is intentionally empty and exists to improve IDE support.

BuilderClass in namespace Illuminate\Contracts\Database\Query

This interface is intentionally empty and exists to improve IDE support.

Application::basePath() — Method in class Application

Get the base path of the Laravel installation.

Application::bootstrapPath() — Method in class Application

Get the path to the bootstrap directory.

Application::boot() — Method in class Application

Boot the application's service providers.

Application::booting() — Method in class Application

Register a new boot listener.

Application::booted() — Method in class Application

Register a new "booted" listener.

Application::bootstrapWith() — Method in class Application

Run the given array of bootstrap classes.

Kernel::bootstrap() — Method in class Kernel

Bootstrap the application for HTTP requests.

Mailable::bcc() — Method in class Mailable

Set the recipients of the message.

Mailer::bcc() — Method in class Mailer

Begin the process of mailing a mailable class instance.

Queue::bulk() — Method in class Queue

Push an array of jobs onto the queue.

BindingRegistrarClass in namespace Illuminate\Contracts\Routing
BindingRegistrar::bind() — Method in class BindingRegistrar

Add a new route parameter binder.

Manager::bootEloquent() — Method in class Manager

Bootstrap Eloquent so it is ready for usage.

BuildsQueriesClass in namespace Illuminate\Database\Concerns
ManagesTransactions::beginTransaction() — Method in class ManagesTransactions

Start a new database transaction.

$ Connection#beforeExecutingCallbacksProperty in class Connection

All of the callbacks that should be invoked before a query is executed.

Connection::bindValues() — Method in class Connection

Bind values to their parameters in the given statement.

Connection::beforeExecuting() — Method in class Connection

Register a hook to be run just before a database query is executed.

ConnectionInterface::beginTransaction() — Method in class ConnectionInterface

Start a new database transaction.

SqlServerConnector::buildConnectString() — Method in class SqlServerConnector

Build a connection string from the given arguments.

SqlServerConnector::buildHostString() — Method in class SqlServerConnector

Build a host string from the given configuration.

FactoryMakeCommand::buildClass() — Method in class FactoryMakeCommand

Build the class with the given name.

BaseCommandClass in namespace Illuminate\Database\Console\Migrations
DatabaseServiceProvider::boot() — Method in class DatabaseServiceProvider

Bootstrap the application events.

DatabaseTransactionsManager::begin() — Method in class DatabaseTransactionsManager

Start a new database transaction.

BroadcastableModelEventOccurredClass in namespace Illuminate\Database\Eloquent
BroadcastableModelEventOccurred::broadcastOn() — Method in class BroadcastableModelEventOccurred

The channels the event should broadcast on.

BroadcastableModelEventOccurred::broadcastAs() — Method in class BroadcastableModelEventOccurred

The name the event should broadcast as.

BroadcastableModelEventOccurred::broadcastWith() — Method in class BroadcastableModelEventOccurred

Get the data that should be sent with the broadcasted event.

BroadcastsEventsClass in namespace Illuminate\Database\Eloquent
BroadcastsEvents::bootBroadcastsEvents() — Method in class BroadcastsEvents

Boot the event broadcasting trait.

BroadcastsEvents::broadcastCreated() — Method in class BroadcastsEvents

Broadcast that the model was created.

BroadcastsEvents::broadcastUpdated() — Method in class BroadcastsEvents

Broadcast that the model was updated.

BroadcastsEvents::broadcastTrashed() — Method in class BroadcastsEvents

Broadcast that the model was trashed.

BroadcastsEvents::broadcastRestored() — Method in class BroadcastsEvents

Broadcast that the model was restored.

BroadcastsEvents::broadcastDeleted() — Method in class BroadcastsEvents

Broadcast that the model was deleted.

BroadcastsEvents::broadcastIfBroadcastChannelsExistForEvent() — Method in class BroadcastsEvents

Broadcast the given event instance if channels are configured for the model event.

BroadcastsEvents::broadcastOn() — Method in class BroadcastsEvents

Get the channels that model events should broadcast on.

BroadcastsEvents::broadcastConnection() — Method in class BroadcastsEvents

Get the queue connection that should be used to broadcast model events.

BroadcastsEvents::broadcastQueue() — Method in class BroadcastsEvents

Get the queue that should be used to broadcast model events.

BroadcastsEvents::broadcastAfterCommit() — Method in class BroadcastsEvents

Determine if the model event broadcast queued job should be dispatched after all transactions are committed.

BuilderClass in namespace Illuminate\Database\Eloquent
HasRelationships::belongsTo() — Method in class HasRelationships

Define an inverse one-to-one or many relationship.

HasRelationships::belongsToMany() — Method in class HasRelationships

Define a many-to-many relationship.

BelongsToManyRelationshipClass in namespace Illuminate\Database\Eloquent\Factories
BelongsToRelationshipClass in namespace Illuminate\Database\Eloquent\Factories
$ HigherOrderBuilderProxy#builderProperty in class HigherOrderBuilderProxy

The collection being operated on.

$ Model#bootedProperty in class Model

The array of booted models.

Model::bootIfNotBooted() — Method in class Model

Check if the model needs to be booted and if so, do it.

Model::booting() — Method in class Model

Perform any actions required before the model boots.

Model::boot() — Method in class Model

Bootstrap the model and its traits.

Model::bootTraits() — Method in class Model

Boot all of the bootable traits on the model.

Model::booted() — Method in class Model

Perform any actions required after the model boots.

Model::broadcastChannelRoute() — Method in class Model

Get the broadcast channel route definition that is associated with the given entity.

Model::broadcastChannel() — Method in class Model

Get the broadcast channel name that is associated with the given entity.

BelongsToClass in namespace Illuminate\Database\Eloquent\Relations
BelongsToManyClass in namespace Illuminate\Database\Eloquent\Relations
BelongsToMany::buildDictionary() — Method in class BelongsToMany

Build model dictionary keyed by the relation's foreign key.

InteractsWithPivotTable::baseAttachRecord() — Method in class InteractsWithPivotTable

Create a new pivot attachment record.

HasManyThrough::buildDictionary() — Method in class HasManyThrough

Build model dictionary keyed by the relation's foreign key.

HasOneOrMany::buildDictionary() — Method in class HasOneOrMany

Build model dictionary keyed by the relation's foreign key.

MorphTo::buildDictionary() — Method in class MorphTo

Build a dictionary with the models.

MorphToMany::baseAttachRecord() — Method in class MorphToMany

Create a new pivot attachment record.

Relation::buildMorphMapFromModels() — Method in class Relation

Builds a table-keyed array from model class names.

SoftDeletes::bootSoftDeletes() — Method in class SoftDeletes

Boot the soft deleting trait for a model.

$ QueryExecuted#bindingsProperty in class QueryExecuted

The array of query bindings.

Connection::beginTransaction() — Method in class Connection

Begin a new database transaction.

SqlServerConnection::beginTransaction() — Method in class SqlServerConnection

Begin a new database transaction.

$ QueryException#bindingsProperty in class QueryException

The bindings for the query.

BuilderClass in namespace Illuminate\Database\Query
$ Builder#bindingsProperty in class Builder

The current query value bindings.

$ Builder#beforeQueryCallbacksProperty in class Builder

The callbacks that should be invoked before the query is executed.

$ Builder#bitwiseOperatorsProperty in class Builder

All of the available bitwise operators.

Builder::beforeQuery() — Method in class Builder

Register a closure to be invoked before the query is executed.

$ Grammar#bitwiseOperatorsProperty in class Grammar

The grammar specific bitwise operators.

$ PostgresGrammar#bitwiseOperatorsProperty in class PostgresGrammar

The grammar specific bitwise operators.

BlueprintClass in namespace Illuminate\Database\Schema
Blueprint::build() — Method in class Blueprint

Execute the blueprint against the database.

Blueprint::bigIncrements() — Method in class Blueprint

Create a new auto-incrementing big integer (8-byte) column on the table.

Blueprint::bigInteger() — Method in class Blueprint

Create a new big integer (8-byte) column on the table.

Blueprint::boolean() — Method in class Blueprint

Create a new boolean column on the table.

Blueprint::binary() — Method in class Blueprint

Create a new binary column on the table.

BuilderClass in namespace Illuminate\Database\Schema
Builder::build() — Method in class Builder

Execute the blueprint to build / modify the table.

Builder::blueprintResolver() — Method in class Builder

Set the Schema Blueprint resolver callback.

$ ForeignIdColumnDefinition#blueprintProperty in class ForeignIdColumnDefinition

The schema builder blueprint instance.

MySqlSchemaState::baseDumpCommand() — Method in class MySqlSchemaState

Get the base dump command arguments for MySQL as a string.

MySqlSchemaState::baseVariables() — Method in class MySqlSchemaState

Get the base variables for a dump / load command.

PostgresSchemaState::baseDumpCommand() — Method in class PostgresSchemaState

Get the base dump command arguments for PostgreSQL as a string.

PostgresSchemaState::baseVariables() — Method in class PostgresSchemaState

Get the base variables for a dump / load command.

SqliteSchemaState::baseCommand() — Method in class SqliteSchemaState

Get the base sqlite command arguments as a string.

SqliteSchemaState::baseVariables() — Method in class SqliteSchemaState

Get the base variables for a dump / load command.

$ CallQueuedListener#backoffProperty in class CallQueuedListener

The number of seconds to wait before retrying a job that encountered an uncaught exception.

Dispatcher::broadcastWhen() — Method in class Dispatcher

Check if the event should be broadcasted by the condition.

Dispatcher::broadcastEvent() — Method in class Dispatcher

Broadcast the given event class.

Filesystem::basename() — Method in class Filesystem

Extract the trailing name component from a file path.

FilesystemAdapter::buildTemporaryUrlsUsing() — Method in class FilesystemAdapter

Define a custom temporary URL builder callback.

FilesystemManager::build() — Method in class FilesystemManager

Build an on-demand disk.

$ Application#basePathProperty in class Application

The base path for the Laravel installation.

$ Application#bootedProperty in class Application

Indicates if the application has "booted".

$ Application#bootingCallbacksProperty in class Application

The array of booting callbacks.

$ Application#bootedCallbacksProperty in class Application

The array of booted callbacks.

$ Application#bootstrapPathProperty in class Application

The custom bootstrap path defined by the developer.

Application::bootstrapWith() — Method in class Application

Run the given array of bootstrap classes.

Application::beforeBootstrapping() — Method in class Application

Register a callback to run before a bootstrapper.

Application::bindPathsInContainer() — Method in class Application

Bind all of the application paths in the container.

Application::basePath() — Method in class Application

Get the base path of the Laravel installation.

Application::bootstrapPath() — Method in class Application

Get the path to the bootstrap directory.

Application::bound() — Method in class Application

Determine if the given abstract type has been bound.

Application::boot() — Method in class Application

Boot the application's service providers.

Application::bootProvider() — Method in class Application

Boot the given service provider.

Application::booting() — Method in class Application

Register a new boot listener.

Application::booted() — Method in class Application

Register a new "booted" listener.

BootProvidersClass in namespace Illuminate\Foundation\Bootstrap
BootProviders::bootstrap() — Method in class BootProviders

Bootstrap the given application.

HandleExceptions::bootstrap() — Method in class HandleExceptions

Bootstrap the given application.

LoadConfiguration::bootstrap() — Method in class LoadConfiguration

Bootstrap the given application.

LoadEnvironmentVariables::bootstrap() — Method in class LoadEnvironmentVariables

Bootstrap the given application.

RegisterFacades::bootstrap() — Method in class RegisterFacades

Bootstrap the given application.

RegisterProviders::bootstrap() — Method in class RegisterProviders

Bootstrap the given application.

SetRequestForConsole::bootstrap() — Method in class SetRequestForConsole

Bootstrap the given application.

PendingDispatch::beforeCommit() — Method in class PendingDispatch

Indicate that the job should not wait until database transactions have been committed before dispatching.

ChannelMakeCommand::buildClass() — Method in class ChannelMakeCommand

Build the class with the given name.

$ CliDumper#basePathProperty in class CliDumper

The base path of the application.

ComponentMakeCommand::buildClass() — Method in class ComponentMakeCommand

Build the class with the given name.

$ Kernel#bootstrappersProperty in class Kernel

The bootstrap classes for the application.

Kernel::bootstrap() — Method in class Kernel

Bootstrap the application for artisan commands.

Kernel::bootstrapWithoutBootingProviders() — Method in class Kernel

Bootstrap the application without booting service providers.

Kernel::bootstrappers() — Method in class Kernel

Get the bootstrap classes for the application.

ListenerMakeCommand::buildClass() — Method in class ListenerMakeCommand

Build the class with the given name.

MailMakeCommand::buildClass() — Method in class MailMakeCommand

Build the class with the given name.

NotificationMakeCommand::buildClass() — Method in class NotificationMakeCommand

Build the class with the given name.

ObserverMakeCommand::buildClass() — Method in class ObserverMakeCommand

Build the class with the given name.

PolicyMakeCommand::buildClass() — Method in class PolicyMakeCommand

Build the class with the given name.

RouteCacheCommand::buildRouteCacheFile() — Method in class RouteCacheCommand

Build the route cache file.

RuleMakeCommand::buildClass() — Method in class RuleMakeCommand

Build the class with the given name.

ViewCacheCommand::bladeFilesIn() — Method in class ViewCacheCommand

Get the Blade files in the given path.

Dispatchable::broadcast() — Method in class Dispatchable

Broadcast the event with the given arguments.

Handler::buildExceptionContext() — Method in class Handler

Create the context array for logging the given exception.

$ HtmlDumper#basePathProperty in class HtmlDumper

The base path of the application.

$ Kernel#bootstrappersProperty in class Kernel

The bootstrap classes for the application.

Kernel::bootstrap() — Method in class Kernel

Bootstrap the application for HTTP requests.

Kernel::bootstrappers() — Method in class Kernel

Get the bootstrap classes for the application.

PreventRequestsDuringMaintenance::bypassResponse() — Method in class PreventRequestsDuringMaintenance

Redirect the user back to the root of the application with a maintenance mode bypass cookie.

$ PackageManifest#basePathProperty in class PackageManifest

The base path.

PackageManifest::build() — Method in class PackageManifest

Build the manifest and write it to disk.

FormRequestServiceProvider::boot() — Method in class FormRequestServiceProvider

Bootstrap the application services.

FoundationServiceProvider::boot() — Method in class FoundationServiceProvider

Boot the service provider.

EventServiceProvider::boot() — Method in class EventServiceProvider

Boot any application services.

RouteServiceProvider::boot() — Method in class RouteServiceProvider

Bootstrap any application services.

InteractsWithAuthentication::be() — Method in class InteractsWithAuthentication

Set the currently logged in user for the application.

InteractsWithViews::blade() — Method in class InteractsWithViews

Render the contents of the given Blade template string.

DatabaseTransactions::beginDatabaseTransaction() — Method in class DatabaseTransactions

Handle database transactions on the specified connections.

RefreshDatabase::beginDatabaseTransaction() — Method in class RefreshDatabase

Begin a database transaction on the testing database.

RefreshDatabase::beforeRefreshingDatabase() — Method in class RefreshDatabase

Perform any work that should take place before the database has started refreshing.

$ TestCase#beforeApplicationDestroyedCallbacksProperty in class TestCase

The callbacks that should be run before the application is destroyed.

TestCase::beforeApplicationDestroyed() — Method in class TestCase

Register a callback to be run before the application is destroyed.

Wormhole::back() — Method in class Wormhole

Travel back to the current time.

$ Vite#buildDirectoryProperty in class Vite

The path to the build directory.

BcryptHasherClass in namespace Illuminate\Hashing
DeterminesStatusCode::badRequest() — Method in class DeterminesStatusCode

Determine if the response was a 400 "Bad Request" response.

$ PendingRequest#baseUrlProperty in class PendingRequest

The base URL for the request.

$ PendingRequest#bodyFormatProperty in class PendingRequest

The request body format.

$ PendingRequest#beforeSendingCallbacksProperty in class PendingRequest

The callbacks that should execute before the request is sent.

PendingRequest::baseUrl() — Method in class PendingRequest

Set the base URL for the pending request.

PendingRequest::bodyFormat() — Method in class PendingRequest

Specify the body format of the request.

PendingRequest::beforeSending() — Method in class PendingRequest

Add a new "before sending" callback to the request.

PendingRequest::buildClient() — Method in class PendingRequest

Build the Guzzle client.

PendingRequest::buildHandlerStack() — Method in class PendingRequest

Build the Guzzle client handler stack.

PendingRequest::buildBeforeSendingHandler() — Method in class PendingRequest

Build the before sending handler.

PendingRequest::buildRecorderHandler() — Method in class PendingRequest

Build the recorder handler.

PendingRequest::buildStubHandler() — Method in class PendingRequest

Build the stub handler.

Request::body() — Method in class Request

Get the body of the request.

Response::body() — Method in class Response

Get the body of the response.

InteractsWithInput::bearerToken() — Method in class InteractsWithInput

Get the bearer token from the request headers.

InteractsWithInput::boolean() — Method in class InteractsWithInput

Retrieve input as a boolean value.

LogManager::build() — Method in class LogManager

Build an on-demand log channel.

$ Mailable#bccProperty in class Mailable

The "bcc" recipients of the message.

Mailable::buildView() — Method in class Mailable

Build the view for the message.

Mailable::buildMarkdownView() — Method in class Mailable

Build the Markdown view for the message.

Mailable::buildViewData() — Method in class Mailable

Build the view data for the message.

Mailable::buildMarkdownText() — Method in class Mailable

Build the text view for a Markdown message.

Mailable::buildFrom() — Method in class Mailable

Add the sender to the message.

Mailable::buildRecipients() — Method in class Mailable

Add all of the recipients to the message.

Mailable::buildSubject() — Method in class Mailable

Set the subject for the message.

Mailable::buildAttachments() — Method in class Mailable

Add all of the attachments to the message.

Mailable::buildDiskAttachments() — Method in class Mailable

Add all of the disk attachments to the message.

Mailable::buildTags() — Method in class Mailable

Add all defined tags to the message.

Mailable::buildMetadata() — Method in class Mailable

Add all defined metadata to the message.

Mailable::bcc() — Method in class Mailable

Set the recipients of the message.

Mailable::buildViewDataUsing() — Method in class Mailable

Register a callback to be called while building the view data.

$ Envelope#bccProperty in class Envelope

The recipients receiving a blind copy of the message.

Envelope::bcc() — Method in class Envelope

Add a "bcc" recipient to the message envelope.

Mailer::bcc() — Method in class Mailer

Begin the process of mailing a mailable class instance.

Message::bcc() — Method in class Message

Add a blind carbon copy to the message.

$ PendingMail#bccProperty in class PendingMail

The "bcc" recipients of the message.

PendingMail::bcc() — Method in class PendingMail

Set the recipients of the message.

SendQueuedMailable::backoff() — Method in class SendQueuedMailable

Get the number of seconds before a released mailable will be available.

BroadcastChannelClass in namespace Illuminate\Notifications\Channels
DatabaseChannel::buildPayload() — Method in class DatabaseChannel

Build an array payload for the DatabaseNotification Model.

MailChannel::buildView() — Method in class MailChannel

Build the notification's view.

MailChannel::buildMessage() — Method in class MailChannel

Build the mail message.

BroadcastNotificationCreatedClass in namespace Illuminate\Notifications\Events
BroadcastNotificationCreated::broadcastOn() — Method in class BroadcastNotificationCreated

Get the channels the event should broadcast on.

BroadcastNotificationCreated::broadcastWith() — Method in class BroadcastNotificationCreated

Get the data that should be sent with the broadcasted event.

BroadcastNotificationCreated::broadcastType() — Method in class BroadcastNotificationCreated

Get the type of the notification being broadcast.

BroadcastMessageClass in namespace Illuminate\Notifications\Messages
$ MailMessage#bccProperty in class MailMessage

The "bcc" information for the message.

MailMessage::bcc() — Method in class MailMessage

Set the bcc address for the mail message.

Notification::broadcastOn() — Method in class Notification

Get the channels the event should broadcast on.

$ NotificationSender#busProperty in class NotificationSender

The Bus dispatcher instance.

NotificationServiceProvider::boot() — Method in class NotificationServiceProvider

Boot the application services.

SendQueuedNotifications::backoff() — Method in class SendQueuedNotifications

Get the number of seconds before a released notification will be available.

AbstractCursorPaginator::buildFragment() — Method in class AbstractCursorPaginator

Build the full fragment portion of a URL.

AbstractPaginator::buildFragment() — Method in class AbstractPaginator

Build the full fragment portion of a URL.

PaginationServiceProvider::boot() — Method in class PaginationServiceProvider

Bootstrap any application services.

BeanstalkdQueueClass in namespace Illuminate\Queue
$ BeanstalkdQueue#blockForProperty in class BeanstalkdQueue

The maximum number of seconds to block for a job.

BeanstalkdQueue::bulk() — Method in class BeanstalkdQueue

Push an array of jobs onto the queue.

Manager::bulk() — Method in class Manager

Push a new an array of jobs onto the queue.

BeanstalkdConnectorClass in namespace Illuminate\Queue\Connectors
BatchesTableCommandClass in namespace Illuminate\Queue\Console
DatabaseQueue::bulk() — Method in class DatabaseQueue

Push an array of jobs onto the queue.

DatabaseQueue::buildDatabaseRecord() — Method in class DatabaseQueue

Create an array to insert for the given job.

BeanstalkdJobClass in namespace Illuminate\Queue\Jobs
BeanstalkdJob::bury() — Method in class BeanstalkdJob

Bury the job in the queue.

Job::backoff() — Method in class Job

The number of seconds to wait before retrying a job that encountered an uncaught exception.

$ ThrottlesExceptions#byJobProperty in class ThrottlesExceptions

Indicates whether the throttle key should use the job's UUID.

ThrottlesExceptions::backoff() — Method in class ThrottlesExceptions

Specify the number of minutes a job should be delayed when it is released (before it has reached its max exceptions).

ThrottlesExceptions::by() — Method in class ThrottlesExceptions

Set the value that the rate limiter should be keyed by.

ThrottlesExceptions::byJob() — Method in class ThrottlesExceptions

Indicate that the throttle key should use the job's UUID.

Queue::bulk() — Method in class Queue

Push an array of jobs onto the queue.

QueueManager::before() — Method in class QueueManager

Register an event listener for the before job event.

$ RedisQueue#blockForProperty in class RedisQueue

The maximum number of seconds to block for a job.

RedisQueue::bulk() — Method in class RedisQueue

Push an array of jobs onto the queue.

SqsQueue::bulk() — Method in class SqsQueue

Push an array of jobs onto the queue.

$ WorkerOptions#backoffProperty in class WorkerOptions

The number of seconds to wait before retrying a job that encountered an uncaught exception.

PhpRedisConnection::blpop() — Method in class PhpRedisConnection

Removes and returns the first element of the list stored at key.

PhpRedisConnection::brpop() — Method in class PhpRedisConnection

Removes and returns the last element of the list stored at key.

PhpRedisConnector::buildClusterConnectionString() — Method in class PhpRedisConnector

Build a single cluster seed string from an array.

ConcurrencyLimiter::block() — Method in class ConcurrencyLimiter

Attempt to acquire the lock for the given number of seconds.

ConcurrencyLimiterBuilder::block() — Method in class ConcurrencyLimiterBuilder

Set the amount of time to block until a lock is available.

DurationLimiter::block() — Method in class DurationLimiter

Attempt to acquire the lock for the given number of seconds.

DurationLimiterBuilder::block() — Method in class DurationLimiterBuilder

Set the amount of time to block until a lock is available.

ControllerMakeCommand::buildClass() — Method in class ControllerMakeCommand

Build the class with the given name.

ControllerMakeCommand::buildParentReplacements() — Method in class ControllerMakeCommand

Build the replacements for a parent controller.

ControllerMakeCommand::buildModelReplacements() — Method in class ControllerMakeCommand

Build the model replacement values.

ControllerMakeCommand::buildFormRequestReplacements() — Method in class ControllerMakeCommand

Build the model replacement values.

BackedEnumCaseNotFoundExceptionClass in namespace Illuminate\Routing\Exceptions
ThrottleRequests::buildException() — Method in class ThrottleRequests

Create a 'too many attempts' exception.

Redirector::back() — Method in class Redirector

Create a new redirect response to the previous location.

$ Route#bindingFieldsProperty in class Route

The fields that implicit binding should use for a given parameter.

Route::bind() — Method in class Route

Bind the route to a given request for execution.

Route::bindingFieldFor() — Method in class Route

Get the binding field for the given parameter.

Route::bindingFields() — Method in class Route

Get the binding fields for the route.

Route::block() — Method in class Route

Specify that the route should not allow concurrent requests from the same session.

RouteParameterBinder::bindPathParameters() — Method in class RouteParameterBinder

Get the parameter matches for the path portion of the URI.

RouteParameterBinder::bindHostParameters() — Method in class RouteParameterBinder

Extract the parameter list from the host part of the request.

$ RouteUri#bindingFieldsProperty in class RouteUri

The fields that should be used when resolving bindings.

$ Router#bindersProperty in class Router

The registered route value binders.

Router::bind() — Method in class Router

Add a new route parameter binder.

SessionManager::buildSession() — Method in class SessionManager

Build the session instance.

SessionManager::buildEncryptedSession() — Method in class SessionManager

Build the encrypted session instance.

SessionManager::blockDriver() — Method in class SessionManager

Get the name of the cache store / driver that should be used to acquire session locks.

BenchmarkClass in namespace Illuminate\Support
App::bootstrapWith() — Method in class App
App::beforeBootstrapping() — Method in class App
App::basePath() — Method in class App
App::bootstrapPath() — Method in class App
App::bound() — Method in class App
App::boot() — Method in class App
App::booting() — Method in class App
App::booted() — Method in class App
App::bind() — Method in class App
App::bindMethod() — Method in class App
App::bindIf() — Method in class App
App::build() — Method in class App
App::beforeResolving() — Method in class App
Artisan::bootstrap() — Method in class Artisan
Artisan::bootstrapWithoutBootingProviders() — Method in class Artisan
Auth::basic() — Method in class Auth
BladeClass in namespace Illuminate\Support\Facades
BroadcastClass in namespace Illuminate\Support\Facades
Broadcast::broadcast() — Method in class Broadcast
BusClass in namespace Illuminate\Support\Facades
Bus::batch() — Method in class Bus
Bus::batched() — Method in class Bus
DB::bindValues() — Method in class DB
DB::beforeExecuting() — Method in class DB
DB::beginTransaction() — Method in class DB
File::basename() — Method in class File
Gate::before() — Method in class Gate
Http::baseUrl() — Method in class Http
Http::bodyFormat() — Method in class Http
Http::beforeSending() — Method in class Http
Http::buildClient() — Method in class Http
Http::buildHandlerStack() — Method in class Http
Http::buildBeforeSendingHandler() — Method in class Http
Http::buildRecorderHandler() — Method in class Http
Http::buildStubHandler() — Method in class Http
Log::build() — Method in class Log
Mail::bcc() — Method in class Mail
Password::broker() — Method in class Password
Queue::before() — Method in class Queue
Queue::bulk() — Method in class Queue
Redirect::back() — Method in class Redirect
Request::bearerToken() — Method in class Request
Request::boolean() — Method in class Request
Route::bind() — Method in class Route
Schema::blueprintResolver() — Method in class Schema
Session::blockDriver() — Method in class Session
Storage::build() — Method in class Storage
Storage::buildTemporaryUrlsUsing() — Method in class Storage
$ ServiceProvider#bootingCallbacksProperty in class ServiceProvider

All of the registered booting callbacks.

$ ServiceProvider#bootedCallbacksProperty in class ServiceProvider

All of the registered booted callbacks.

ServiceProvider::booting() — Method in class ServiceProvider

Register a booting callback to be run before the "boot" method is called.

ServiceProvider::booted() — Method in class ServiceProvider

Register a booted callback to be run after the "boot" method is called.

Str::before() — Method in class Str

Get the portion of a string before the first occurrence of a given value.

Str::beforeLast() — Method in class Str

Get the portion of a string before the last occurrence of a given value.

Str::between() — Method in class Str

Get the portion of a string between two given values.

Str::betweenFirst() — Method in class Str

Get the smallest possible portion of a string between two given values.

Stringable::basename() — Method in class Stringable

Get the trailing name component of the path.

Stringable::before() — Method in class Stringable

Get the portion of a string before the first occurrence of a given value.

Stringable::beforeLast() — Method in class Stringable

Get the portion of a string before the last occurrence of a given value.

Stringable::between() — Method in class Stringable

Get the portion of a string between two given values.

Stringable::betweenFirst() — Method in class Stringable

Get the smallest possible portion of a string between two given values.

BatchFakeClass in namespace Illuminate\Support\Testing\Fakes
BatchRepositoryFakeClass in namespace Illuminate\Support\Testing\Fakes
$ BatchRepositoryFake#batchesProperty in class BatchRepositoryFake

The batches stored in the repository.

BusFakeClass in namespace Illuminate\Support\Testing\Fakes
$ BusFake#batchRepositoryProperty in class BusFake

The fake repository to track batched jobs.

$ BusFake#batchesProperty in class BusFake

The batches that have been dispatched.

BusFake::batched() — Method in class BusFake

Get all of the pending batches matching a truth-test callback.

BusFake::batch() — Method in class BusFake

Create a new batch of queueable jobs.

MailFake::bcc() — Method in class MailFake

Begin the process of mailing a mailable class instance.

$ PendingBatchFake#busProperty in class PendingBatchFake

The fake bus instance.

$ PendingChainFake#busProperty in class PendingChainFake

The fake bus instance.

QueueFake::bulk() — Method in class QueueFake

Push an array of jobs onto the queue.

$ ViewErrorBag#bagsProperty in class ViewErrorBag

The array of the view error bags.

TestDatabases::bootTestDatabase() — Method in class TestDatabases

Boot a test database.

ParallelTestingServiceProvider::boot() — Method in class ParallelTestingServiceProvider

Boot the application's service providers.

$ TestResponse#baseResponseProperty in class TestResponse

The response to delegate to.

File::between() — Method in class File

Indicate that the uploaded file should be between a minimum and maximum size in kilobytes.

File::buildValidationRules() — Method in class File

Build the array of underlying validation rules based on the current state.

File::buildMimetypes() — Method in class File

Separate the given mimetypes from extensions and return an array of correct rules to validate against.

BladeCompilerClass in namespace Illuminate\View\Compilers
$ Compiler#basePathProperty in class Compiler

The base path that should be removed from paths before hashing.

$ ComponentTagCompiler#bladeProperty in class ComponentTagCompiler

The Blade compiler instance.

$ ComponentTagCompiler#boundAttributesProperty in class ComponentTagCompiler

The "bind:" attributes that have been compiled for the current component.

$ Component#bladeViewCacheProperty in class Component

The cache of blade view names, keyed by contents.

ManagesEvents::buildClassEventCallback() — Method in class ManagesEvents

Build a class based container callback Closure.

DynamicComponent::bindings() — Method in class DynamicComponent

Get the names of the variables that should be bound to the component.

C

$ Gate#containerProperty in class Gate

The container instance.

Gate::check() — Method in class Gate

Determine if all of the given abilities should be granted for the current user.

Gate::canBeCalledWithUser() — Method in class Gate

Determine whether the callback/method can be called with the given user.

Gate::callbackAllowsGuests() — Method in class Gate

Determine if the callback allows guests.

Gate::callAuthCallback() — Method in class Gate

Resolve and call the appropriate authorization callback.

Gate::callBeforeCallbacks() — Method in class Gate

Call all of the before callbacks and return if a result is given.

Gate::callAfterCallbacks() — Method in class Gate

Call all of the after callbacks with check result.

Gate::callPolicyBefore() — Method in class Gate

Call the "before" method on the given policy, if applicable.

Gate::callPolicyMethod() — Method in class Gate

Call the appropriate method on the given policy.

$ Response#codeProperty in class Response

The response code.

Response::code() — Method in class Response

Get the response code / reason.

$ AuthManager#customCreatorsProperty in class AuthManager

The registered custom driver creators.

AuthManager::callCustomCreator() — Method in class AuthManager

Call a custom driver creator.

AuthManager::createSessionDriver() — Method in class AuthManager

Create a session based authentication guard.

AuthManager::createTokenDriver() — Method in class AuthManager

Create a token based authentication guard.

ClearResetsCommandClass in namespace Illuminate\Auth\Console
CreatesUserProvidersClass in namespace Illuminate\Auth
$ CreatesUserProviders#customProviderCreatorsProperty in class CreatesUserProviders

The registered custom provider creators.

CreatesUserProviders::createUserProvider() — Method in class CreatesUserProviders

Create the user provider implementation for the driver.

CreatesUserProviders::createDatabaseProvider() — Method in class CreatesUserProviders

Create an instance of the database user provider.

CreatesUserProviders::createEloquentProvider() — Method in class CreatesUserProviders

Create an instance of the Eloquent user provider.

$ DatabaseUserProvider#connectionProperty in class DatabaseUserProvider

The active database connection.

EloquentUserProvider::createModel() — Method in class EloquentUserProvider

Create a new instance of the model.

$ Attempting#credentialsProperty in class Attempting

The credentials for the user.

CurrentDeviceLogoutClass in namespace Illuminate\Auth\Events
$ Failed#credentialsProperty in class Failed

The credentials provided by the attempter.

GuardHelpers::check() — Method in class GuardHelpers

Determine if the current user is authenticated.

$ ResetPassword#createUrlCallbackProperty in class ResetPassword

The callback that should be used to create the reset password URL.

ResetPassword::createUrlUsing() — Method in class ResetPassword

Set a callback that should be used when creating the reset password button URL.

$ VerifyEmail#createUrlCallbackProperty in class VerifyEmail

The callback that should be used to create the verify email URL.

VerifyEmail::createUrlUsing() — Method in class VerifyEmail

Set a callback that should be used when creating the email verification URL.

CanResetPasswordClass in namespace Illuminate\Auth\Passwords
$ DatabaseTokenRepository#connectionProperty in class DatabaseTokenRepository

The database connection instance.

DatabaseTokenRepository::create() — Method in class DatabaseTokenRepository

Create a new token record.

DatabaseTokenRepository::createNewToken() — Method in class DatabaseTokenRepository

Create a new token for the user.

PasswordBroker::createToken() — Method in class PasswordBroker

Create a new password reset token for the given user.

PasswordBrokerManager::createTokenRepository() — Method in class PasswordBrokerManager

Create a token repository instance based on the given configuration.

TokenRepositoryInterface::create() — Method in class TokenRepositoryInterface

Create a new token.

$ RequestGuard#callbackProperty in class RequestGuard

The guard callback.

$ SessionGuard#cookieProperty in class SessionGuard

The Illuminate cookie creator service.

SessionGuard::createRecaller() — Method in class SessionGuard

Create a "remember me" cookie for a given ID.

SessionGuard::clearUserDataFromStorage() — Method in class SessionGuard

Remove the user data from the session and cookies.

SessionGuard::cycleRememberToken() — Method in class SessionGuard

Refresh the "remember me" token for the user.

$ BroadcastManager#customCreatorsProperty in class BroadcastManager

The registered custom driver creators.

BroadcastManager::channelRoutes() — Method in class BroadcastManager

Register the routes for handling broadcast authentication and sockets.

BroadcastManager::connection() — Method in class BroadcastManager

Get a driver instance.

BroadcastManager::callCustomCreator() — Method in class BroadcastManager

Call a custom driver creator.

BroadcastManager::createPusherDriver() — Method in class BroadcastManager

Create an instance of the driver.

BroadcastManager::createAblyDriver() — Method in class BroadcastManager

Create an instance of the driver.

BroadcastManager::createRedisDriver() — Method in class BroadcastManager

Create an instance of the driver.

BroadcastManager::createLogDriver() — Method in class BroadcastManager

Create an instance of the driver.

BroadcastManager::createNullDriver() — Method in class BroadcastManager

Create an instance of the driver.

$ Broadcaster#channelsProperty in class Broadcaster

The registered channel authenticators.

$ Broadcaster#channelOptionsProperty in class Broadcaster

The registered channel options.

Broadcaster::channel() — Method in class Broadcaster

Register a channel authenticator.

Broadcaster::channelNameMatchesPattern() — Method in class Broadcaster

Check if the channel name from the request matches a pattern from registered channels.

$ RedisBroadcaster#connectionProperty in class RedisBroadcaster

The Redis connection to use for broadcasting.

ChannelClass in namespace Illuminate\Broadcasting
$ Batch#createdAtProperty in class Batch

The date indicating when the batch was created.

$ Batch#cancelledAtProperty in class Batch

The date indicating when the batch was cancelled.

Batch::cancel() — Method in class Batch

Cancel the batch.

Batch::canceled() — Method in class Batch

Determine if the batch has been cancelled.

Batch::cancelled() — Method in class Batch

Determine if the batch has been cancelled.

BatchRepository::cancel() — Method in class BatchRepository

Cancel the batch that has the given ID.

$ DatabaseBatchRepository#connectionProperty in class DatabaseBatchRepository

The database connection instance.

DatabaseBatchRepository::cancel() — Method in class DatabaseBatchRepository

Cancel the batch that has the given ID.

$ Dispatcher#containerProperty in class Dispatcher

The container implementation.

Dispatcher::chain() — Method in class Dispatcher

Create a new chain of queueable jobs.

Dispatcher::commandShouldBeQueued() — Method in class Dispatcher

Determine if the given command should be queued.

$ PendingBatch#containerProperty in class PendingBatch

The IoC container instance.

PendingBatch::catch() — Method in class PendingBatch

Add a callback to be executed after the first failing job in the batch.

PendingBatch::catchCallbacks() — Method in class PendingBatch

Get the "catch" callbacks that have been registered with the pending batch.

PendingBatch::connection() — Method in class PendingBatch

Get the connection used by the pending batch.

$ Queueable#connectionProperty in class Queueable

The name of the connection the job should be sent to.

$ Queueable#chainConnectionProperty in class Queueable

The name of the connection the chain should be sent to.

$ Queueable#chainQueueProperty in class Queueable

The name of the queue the chain should be sent to.

$ Queueable#chainCatchCallbacksProperty in class Queueable

The callbacks to be executed on chain failure.

$ Queueable#chainedProperty in class Queueable

The jobs that should run if this job is successful.

Queueable::chain() — Method in class Queueable

Set the jobs that should run if this job is successful.

$ UniqueLock#cacheProperty in class UniqueLock

The cache repository implementation.

ArrayStore::calculateExpiration() — Method in class ArrayStore

Get the expiration time of the key.

CacheLockClass in namespace Illuminate\Cache
CacheManagerClass in namespace Illuminate\Cache
$ CacheManager#customCreatorsProperty in class CacheManager

The registered custom driver creators.

CacheManager::callCustomCreator() — Method in class CacheManager

Call a custom driver creator.

CacheManager::createApcDriver() — Method in class CacheManager

Create an instance of the APC cache driver.

CacheManager::createArrayDriver() — Method in class CacheManager

Create an instance of the array cache driver.

CacheManager::createFileDriver() — Method in class CacheManager

Create an instance of the file cache driver.

CacheManager::createMemcachedDriver() — Method in class CacheManager

Create an instance of the Memcached cache driver.

CacheManager::createNullDriver() — Method in class CacheManager

Create an instance of the Null cache driver.

CacheManager::createRedisDriver() — Method in class CacheManager

Create an instance of the Redis cache driver.

CacheManager::createDatabaseDriver() — Method in class CacheManager

Create an instance of the database cache driver.

CacheManager::createDynamodbDriver() — Method in class CacheManager

Create an instance of the DynamoDB cache driver.

CacheServiceProviderClass in namespace Illuminate\Cache
CacheTableCommandClass in namespace Illuminate\Cache\Console
$ CacheTableCommand#composerProperty in class CacheTableCommand
CacheTableCommand::createBaseMigration() — Method in class CacheTableCommand

Create a base migration file for the table.

ClearCommandClass in namespace Illuminate\Cache\Console
$ ClearCommand#cacheProperty in class ClearCommand

The cache manager instance.

ClearCommand::cache() — Method in class ClearCommand

Get the cache instance for the command.

$ ForgetCommand#cacheProperty in class ForgetCommand

The cache manager instance.

$ DatabaseLock#connectionProperty in class DatabaseLock

The database connection instance.

$ DatabaseStore#connectionProperty in class DatabaseStore

The database connection instance.

CacheEventClass in namespace Illuminate\Cache\Events
CacheHitClass in namespace Illuminate\Cache\Events
CacheMissedClass in namespace Illuminate\Cache\Events
MemcachedConnector::connect() — Method in class MemcachedConnector

Create a new Memcached connection.

MemcachedConnector::createMemcachedInstance() — Method in class MemcachedConnector

Create the Memcached instance.

MemcachedStore::calculateExpiration() — Method in class MemcachedStore

Get the expiration time of the key.

$ RateLimiter#cacheProperty in class RateLimiter

The cache store implementation.

RateLimiter::clear() — Method in class RateLimiter

Clear the hits and lockout timer for the given key.

RateLimiter::cleanRateLimiterKey() — Method in class RateLimiter

Clean the rate limiter key from unicode characters.

$ RedisStore#connectionProperty in class RedisStore

The Redis connection instance that should be used to manage locks.

RedisStore::currentTags() — Method in class RedisStore

Get a collection of all of the cache tags currently being used.

RedisStore::connection() — Method in class RedisStore

Get the Redis connection instance.

Repository::clear() — Method in class Repository
{@inheritdoc}
$ Application#commandMapProperty in class Application

A map of command names to classes.

Application::call() — Method in class Application

Run an Artisan console command by name.

CacheCommandMutexClass in namespace Illuminate\Console
$ CacheCommandMutex#cacheProperty in class CacheCommandMutex

The cache factory implementation.

CacheCommandMutex::create() — Method in class CacheCommandMutex

Attempt to obtain a command mutex for the given command.

CacheCommandMutex::commandMutexName() — Method in class CacheCommandMutex
CommandClass in namespace Illuminate\Console
Command::configureUsingFluentDefinition() — Method in class Command

Configure the console command using a fluent definition.

Command::configureIsolation() — Method in class Command

Configure the console command for isolation.

Command::commandIsolationMutex() — Method in class Command

Get a command isolation mutex instance for the command.

CommandMutexClass in namespace Illuminate\Console
CommandMutex::create() — Method in class CommandMutex

Attempt to obtain a command mutex for the given command.

CallsCommandsClass in namespace Illuminate\Console\Concerns
CallsCommands::call() — Method in class CallsCommands

Call another console command.

CallsCommands::callSilent() — Method in class CallsCommands

Call another console command without output.

CallsCommands::callSilently() — Method in class CallsCommands

Call another console command without output.

CallsCommands::createInputFromArguments() — Method in class CallsCommands

Create an input instance from the given arguments.

CallsCommands::context() — Method in class CallsCommands

Get all of the context passed to the command.

CreatesMatchingTestClass in namespace Illuminate\Console\Concerns
$ InteractsWithIO#componentsProperty in class InteractsWithIO

The console components factory.

InteractsWithIO::confirm() — Method in class InteractsWithIO

Confirm a question with the user.

InteractsWithIO::choice() — Method in class InteractsWithIO

Give the user a single choice from an array of answers.

InteractsWithIO::comment() — Method in class InteractsWithIO

Write a string as comment output.

ConfirmableTraitClass in namespace Illuminate\Console
ConfirmableTrait::confirmToProceed() — Method in class ConfirmableTrait

Confirm before proceeding with the action.

ContainerCommandLoaderClass in namespace Illuminate\Console
$ ContainerCommandLoader#containerProperty in class ContainerCommandLoader

The container instance.

$ ContainerCommandLoader#commandMapProperty in class ContainerCommandLoader

A map of command names to classes.

CommandFinishedClass in namespace Illuminate\Console\Events
$ CommandFinished#commandProperty in class CommandFinished

The command name.

CommandStartingClass in namespace Illuminate\Console\Events
$ CommandStarting#commandProperty in class CommandStarting

The command name.

CacheAwareClass in namespace Illuminate\Console\Scheduling
CacheEventMutexClass in namespace Illuminate\Console\Scheduling
$ CacheEventMutex#cacheProperty in class CacheEventMutex

The cache repository implementation.

CacheEventMutex::create() — Method in class CacheEventMutex

Attempt to obtain an event mutex for the given event.

CacheSchedulingMutexClass in namespace Illuminate\Console\Scheduling
$ CacheSchedulingMutex#cacheProperty in class CacheSchedulingMutex

The cache factory implementation.

CacheSchedulingMutex::create() — Method in class CacheSchedulingMutex

Attempt to obtain a scheduling mutex for the given event.

CallbackEventClass in namespace Illuminate\Console\Scheduling
$ CallbackEvent#callbackProperty in class CallbackEvent

The callback to call.

CommandBuilderClass in namespace Illuminate\Console\Scheduling
$ Event#commandProperty in class Event

The command string.

Event::callBeforeCallbacks() — Method in class Event

Call all of the "before" callbacks for the event.

Event::callAfterCallbacks() — Method in class Event

Call all of the "after" callbacks for the event.

Event::createMutexNameUsing() — Method in class Event

Set the mutex name or name resolver callback.

EventMutex::create() — Method in class EventMutex

Attempt to obtain an event mutex for the given event.

ManagesFrequencies::cron() — Method in class ManagesFrequencies

The Cron expression representing the event's frequency.

Schedule::call() — Method in class Schedule

Add a new callback event to the schedule.

Schedule::command() — Method in class Schedule

Add a new Artisan command event to the schedule.

Schedule::compileParameters() — Method in class Schedule

Compile parameters for a command.

Schedule::compileArrayInput() — Method in class Schedule

Compile array input for a command.

SchedulingMutex::create() — Method in class SchedulingMutex

Attempt to obtain a scheduling mutex for the given event.

ChoiceClass in namespace Illuminate\Console\View\Components
ComponentClass in namespace Illuminate\Console\View\Components
Component::compile() — Method in class Component

Compile the given view contents.

ConfirmClass in namespace Illuminate\Console\View\Components
Factory::choice() — Method in class Factory
Factory::confirm() — Method in class Factory
BoundMethod::call() — Method in class BoundMethod

Call the given Closure / [email protected] and inject its dependencies.

BoundMethod::callClass() — Method in class BoundMethod

Call a string reference to a class using [email protected] syntax.

BoundMethod::callBoundMethod() — Method in class BoundMethod

Call a method that has been bound to the container.

ContainerClass in namespace Illuminate\Container
$ Container#contextualProperty in class Container

The contextual binding map.

Container::callMethodBinding() — Method in class Container

Get the method binding for the given method.

Container::call() — Method in class Container

Call the given Closure / [email protected] and inject its dependencies.

ContextualBindingBuilderClass in namespace Illuminate\Container
$ ContextualBindingBuilder#containerProperty in class ContextualBindingBuilder

The underlying container instance.

$ ContextualBindingBuilder#concreteProperty in class ContextualBindingBuilder

The concrete instance.

$ RewindableGenerator#countProperty in class RewindableGenerator

The number of tagged services.

RewindableGenerator::count() — Method in class RewindableGenerator

Get the total number of tagged services.

Authorizable::can() — Method in class Authorizable

Determine if the entity has a given ability.

Gate::check() — Method in class Gate

Determine if all of the given abilities should be granted for the current user.

CanResetPasswordClass in namespace Illuminate\Contracts\Auth
Guard::check() — Method in class Guard

Determine if the current user is authenticated.

Factory::connection() — Method in class Factory

Get a broadcaster implementation by name.

Application::call() — Method in class Application

Run an Artisan console command by name.

Kernel::call() — Method in class Kernel

Run an Artisan console command by name.

CircularDependencyExceptionClass in namespace Illuminate\Contracts\Container
ContainerClass in namespace Illuminate\Contracts\Container
Container::call() — Method in class Container

Call the given Closure / [email protected] and inject its dependencies.

ContextualBindingBuilderClass in namespace Illuminate\Contracts\Container
CastableClass in namespace Illuminate\Contracts\Database\Eloquent
Castable::castUsing() — Method in class Castable
CastsAttributesClass in namespace Illuminate\Contracts\Database\Eloquent
CastsInboundAttributesClass in namespace Illuminate\Contracts\Database\Eloquent
$ ModelIdentifier#classProperty in class ModelIdentifier

The class name of the model.

$ ModelIdentifier#connectionProperty in class ModelIdentifier

The connection name of the model.

$ ModelIdentifier#collectionClassProperty in class ModelIdentifier

The class name of the model collection.

CloudClass in namespace Illuminate\Contracts\Filesystem
Filesystem::copy() — Method in class Filesystem

Copy a file to a new location.

Application::configPath() — Method in class Application

Get the path to the application configuration files.

CachesConfigurationClass in namespace Illuminate\Contracts\Foundation
CachesConfiguration::configurationIsCached() — Method in class CachesConfiguration

Determine if the application configuration is cached.

CachesRoutesClass in namespace Illuminate\Contracts\Foundation
Hasher::check() — Method in class Hasher

Check the given plain value against a hash.

Mailable::cc() — Method in class Mailable

Set the recipients of the message.

Factory::channel() — Method in class Factory

Get a channel instance by name.

CursorPaginatorClass in namespace Illuminate\Contracts\Pagination
CursorPaginator::cursor() — Method in class CursorPaginator

Get the current cursor being paginated.

Paginator::currentPage() — Method in class Paginator

Determine the current page being paginated.

ProcessResult::command() — Method in class ProcessResult

Get the original command executed by the process.

ClearableQueueClass in namespace Illuminate\Contracts\Queue
ClearableQueue::clear() — Method in class ClearableQueue

Delete all of the jobs from the queue.

Factory::connection() — Method in class Factory

Resolve a queue connection instance.

ConnectionClass in namespace Illuminate\Contracts\Redis
Connection::command() — Method in class Connection

Run a command against the Redis database.

ConnectorClass in namespace Illuminate\Contracts\Redis
Connector::connect() — Method in class Connector

Create a connection to a Redis cluster.

Connector::connectToCluster() — Method in class Connector

Create a connection to a Redis instance.

Factory::connection() — Method in class Factory

Get a Redis connection by name.

UrlGenerator::current() — Method in class UrlGenerator

Get the current URL for the request.

CanBeEscapedWhenCastToStringClass in namespace Illuminate\Contracts\Support
Translator::choice() — Method in class Translator

Get a translation according to an integer value.

Factory::composer() — Method in class Factory

Register a view composer event.

Factory::creator() — Method in class Factory

Register a view creator event.

CookieJarClass in namespace Illuminate\Cookie
CookieServiceProviderClass in namespace Illuminate\Cookie
CookieValuePrefixClass in namespace Illuminate\Cookie
CookieValuePrefix::create() — Method in class CookieValuePrefix

Create a new cookie value prefix for the given cookie name.

$ AddQueuedCookiesToResponse#cookiesProperty in class AddQueuedCookiesToResponse

The cookie jar instance.

Manager::connection() — Method in class Manager

Get a connection instance from the global manager.

ClassMorphViolationExceptionClass in namespace Illuminate\Database
BuildsQueries::chunk() — Method in class BuildsQueries

Chunk the results of the query.

BuildsQueries::chunkMap() — Method in class BuildsQueries

Run a map over each item while chunking.

BuildsQueries::chunkById() — Method in class BuildsQueries

Chunk the results of a query by comparing IDs.

BuildsQueries::cursorPaginator() — Method in class BuildsQueries

Create a new cursor paginator instance.

CompilesJsonPathsClass in namespace Illuminate\Database\Concerns
ManagesTransactions::createTransaction() — Method in class ManagesTransactions

Create a transaction within the database.

ManagesTransactions::createSavepoint() — Method in class ManagesTransactions

Create a save point within the database.

ManagesTransactions::commit() — Method in class ManagesTransactions

Commit the active database transaction.

ConfigurationUrlParserClass in namespace Illuminate\Database
ConnectionClass in namespace Illuminate\Database
$ Connection#configProperty in class Connection

The database connection configuration options.

Connection::cursor() — Method in class Connection

Run a select statement against the database and returns a generator.

ConnectionInterfaceClass in namespace Illuminate\Database
ConnectionInterface::cursor() — Method in class ConnectionInterface

Run a select statement against the database and returns a generator.

ConnectionInterface::commit() — Method in class ConnectionInterface

Commit the active database transaction.

ConnectionResolverClass in namespace Illuminate\Database
$ ConnectionResolver#connectionsProperty in class ConnectionResolver

All of the registered connections.

ConnectionResolver::connection() — Method in class ConnectionResolver

Get a database connection instance.

ConnectionResolverInterfaceClass in namespace Illuminate\Database
ConnectionResolverInterface::connection() — Method in class ConnectionResolverInterface

Get a database connection instance.

ConnectionFactoryClass in namespace Illuminate\Database\Connectors
$ ConnectionFactory#containerProperty in class ConnectionFactory

The IoC container instance.

ConnectionFactory::createSingleConnection() — Method in class ConnectionFactory

Create a single database connection instance.

ConnectionFactory::createReadWriteConnection() — Method in class ConnectionFactory

Create a read / write database connection instance.

ConnectionFactory::createReadPdo() — Method in class ConnectionFactory

Create a new PDO instance for reading.

ConnectionFactory::createPdoResolver() — Method in class ConnectionFactory

Create a new Closure that resolves to a PDO instance.

ConnectionFactory::createPdoResolverWithHosts() — Method in class ConnectionFactory

Create a new Closure that resolves to a PDO instance with a specific host or an array of hosts.

ConnectionFactory::createPdoResolverWithoutHosts() — Method in class ConnectionFactory

Create a new Closure that resolves to a PDO instance where there is no configured host.

ConnectionFactory::createConnector() — Method in class ConnectionFactory

Create a connector instance based on the configuration.

ConnectionFactory::createConnection() — Method in class ConnectionFactory

Create a new connection instance.

ConnectorClass in namespace Illuminate\Database\Connectors
Connector::createConnection() — Method in class Connector

Create a new PDO connection.

Connector::createPdoConnection() — Method in class Connector

Create a new PDO connection instance.

ConnectorInterfaceClass in namespace Illuminate\Database\Connectors
ConnectorInterface::connect() — Method in class ConnectorInterface

Establish a database connection.

MySqlConnector::connect() — Method in class MySqlConnector

Establish a database connection.

MySqlConnector::configureIsolationLevel() — Method in class MySqlConnector

Set the connection transaction isolation level.

MySqlConnector::configureEncoding() — Method in class MySqlConnector

Set the connection character set and collation.

MySqlConnector::configureTimezone() — Method in class MySqlConnector

Set the timezone on the connection.

PostgresConnector::connect() — Method in class PostgresConnector

Establish a database connection.

PostgresConnector::configureIsolationLevel() — Method in class PostgresConnector

Set the connection transaction isolation level.

PostgresConnector::configureEncoding() — Method in class PostgresConnector

Set the connection character set and collation.

PostgresConnector::configureTimezone() — Method in class PostgresConnector

Set the timezone on the connection.

PostgresConnector::configureSearchPath() — Method in class PostgresConnector

Set the "search_path" on the database connection.

PostgresConnector::configureApplicationName() — Method in class PostgresConnector

Set the application name on the connection.

PostgresConnector::configureSynchronousCommit() — Method in class PostgresConnector

Configure the synchronous_commit setting.

SQLiteConnector::connect() — Method in class SQLiteConnector

Establish a database connection.

SqlServerConnector::connect() — Method in class SqlServerConnector

Establish a database connection.

SqlServerConnector::configureIsolationLevel() — Method in class SqlServerConnector

Set the connection transaction isolation level.

$ DatabaseInspectionCommand#composerProperty in class DatabaseInspectionCommand

The Composer instance.

DbCommand::commandArguments() — Method in class DbCommand

Get the arguments for the database client command.

DbCommand::commandEnvironment() — Method in class DbCommand

Get the environment variables for the database client command.

MigrateCommand::createMissingSqliteDatabase() — Method in class MigrateCommand

Create a missing SQLite database.

MigrateCommand::createMissingMysqlDatabase() — Method in class MigrateCommand

Create a missing MySQL database.

$ MigrateMakeCommand#creatorProperty in class MigrateMakeCommand

The migration creator instance.

$ MigrateMakeCommand#composerProperty in class MigrateMakeCommand

The Composer instance.

$ MonitorCommand#connectionProperty in class MonitorCommand

The connection resolver instance.

ShowCommand::collectViews() — Method in class ShowCommand

Get information regarding the views within the database.

ShowModelCommand::columnIsUnique() — Method in class ShowModelCommand

Determine if the given attribute is unique.

TableCommand::columns() — Method in class TableCommand

Get the information regarding the table's columns.

$ DatabaseManager#connectionsProperty in class DatabaseManager

The active connection instances.

DatabaseManager::connection() — Method in class DatabaseManager

Get a database connection instance.

DatabaseManager::configuration() — Method in class DatabaseManager

Get the configuration for a connection.

DatabaseManager::configure() — Method in class DatabaseManager

Prepare the database connection instance.

$ DatabaseTransactionRecord#connectionProperty in class DatabaseTransactionRecord

The name of the database connection.

$ DatabaseTransactionRecord#callbacksProperty in class DatabaseTransactionRecord

The callbacks that should be executed after committing.

$ DatabaseTransactionsManager#callbacksShouldIgnoreProperty in class DatabaseTransactionsManager

The database transaction that should be ignored by callbacks.

DatabaseTransactionsManager::commit() — Method in class DatabaseTransactionsManager

Commit the active database transaction.

DatabaseTransactionsManager::callbacksShouldIgnore() — Method in class DatabaseTransactionsManager

Specify that callbacks should ignore the given transaction when determining if they should be executed.

DatabaseTransactionsManager::callbackApplicableTransactions() — Method in class DatabaseTransactionsManager

Get the transactions that are applicable to callbacks.

DetectsConcurrencyErrors::causedByConcurrencyError() — Method in class DetectsConcurrencyErrors

Determine if the given exception was caused by a concurrency error such as a deadlock or serialization failure.

DetectsLostConnections::causedByLostConnection() — Method in class DetectsLostConnections

Determine if the given exception was caused by a lost connection.

$ BroadcastableModelEventOccurred#channelsProperty in class BroadcastableModelEventOccurred

The channels that the event should be broadcast on.

$ BroadcastableModelEventOccurred#connectionProperty in class BroadcastableModelEventOccurred

The queue connection that should be used to queue the broadcast job.

Builder::cursor() — Method in class Builder

Get a lazy collection for the given query.

Builder::cursorPaginate() — Method in class Builder

Paginate the given query into a cursor paginator.

Builder::create() — Method in class Builder

Save a new model and return the instance.

Builder::callScope() — Method in class Builder

Apply the given scope on the current builder instance.

Builder::callNamedScope() — Method in class Builder

Apply the given named scope on the current builder instance.

Builder::createNestedWhere() — Method in class Builder

Create a where array with nested where conditions.

Builder::combineConstraints() — Method in class Builder

Combine an array of constraints into a single constraint.

Builder::createSelectWithConstraint() — Method in class Builder

Create a constraint to select the given columns for the relation.

Builder::clone() — Method in class Builder

Clone the Eloquent query builder.

ArrayObject::collect() — Method in class ArrayObject

Get a collection containing the underlying array.

AsArrayObject::castUsing() — Method in class AsArrayObject

Get the caster class to use when casting from / to this cast target.

AsCollection::castUsing() — Method in class AsCollection

Get the caster class to use when casting from / to this cast target.

AsEncryptedArrayObject::castUsing() — Method in class AsEncryptedArrayObject

Get the caster class to use when casting from / to this cast target.

AsEncryptedCollection::castUsing() — Method in class AsEncryptedCollection

Get the caster class to use when casting from / to this cast target.

AsEnumArrayObject::castUsing() — Method in class AsEnumArrayObject

Get the caster class to use when casting from / to this cast target.

AsEnumCollection::castUsing() — Method in class AsEnumCollection

Get the caster class to use when casting from / to this cast target.

AsStringable::castUsing() — Method in class AsStringable

Get the caster class to use when casting from / to this cast target.

CollectionClass in namespace Illuminate\Database\Eloquent
Collection::contains() — Method in class Collection

Determine if a key exists in the collection.

Collection::countBy() — Method in class Collection

Count the number of items in the collection by a field or using a callback.

Collection::collapse() — Method in class Collection

Collapse the collection of items into a single array.

$ HasAttributes#changesProperty in class HasAttributes

The changed model attributes.

$ HasAttributes#castsProperty in class HasAttributes

The attributes that should be cast.

$ HasAttributes#classCastCacheProperty in class HasAttributes

The attributes that have been cast using custom classes.

$ HasAttributes#castTypeCacheProperty in class HasAttributes

The cache of the converted cast types.

HasAttributes::castAttribute() — Method in class HasAttributes

Cast an attribute to a native PHP type.

HasAttributes::castAttributeAsJson() — Method in class HasAttributes

Cast the given attribute to JSON.

HasAttributes::castAttributeAsEncryptedString() — Method in class HasAttributes

Cast the given attribute to an encrypted string.

HasAttributes::cacheMutatedAttributes() — Method in class HasAttributes

Extract and cache all the mutated attributes of a class.

HasEvents::creating() — Method in class HasEvents

Register a creating model event with the dispatcher.

HasEvents::created() — Method in class HasEvents

Register a created model event with the dispatcher.

QueriesRelationships::canUseExistsForExistenceCheck() — Method in class QueriesRelationships

Check if we can run an "exists" query to optimize performance.

BelongsToManyRelationship::createFor() — Method in class BelongsToManyRelationship

Create the attached relationship for the given model.

CrossJoinSequenceClass in namespace Illuminate\Database\Eloquent\Factories
$ Factory#countProperty in class Factory

The number of models that should be generated.

$ Factory#connectionProperty in class Factory

The name of the database connection that will be used to create the models.

Factory::configure() — Method in class Factory

Configure the factory.

Factory::createOne() — Method in class Factory

Create a single model and persist it to the database.

Factory::createOneQuietly() — Method in class Factory

Create a single model and persist it to the database without dispatching any model events.

Factory::createMany() — Method in class Factory

Create a collection of models and persist them to the database.

Factory::createManyQuietly() — Method in class Factory

Create a collection of models and persist them to the database without dispatching any model events.

Factory::create() — Method in class Factory

Create a collection of models and persist them to the database.

Factory::createQuietly() — Method in class Factory

Create a collection of models and persist them to the database without dispatching any model events.

Factory::createChildren() — Method in class Factory

Create the children for the given model.

Factory::crossJoinSequence() — Method in class Factory

Add a new cross joined sequenced state transformation to the model definition.

Factory::callAfterMaking() — Method in class Factory

Call the "after making" callbacks for the given model instances.

Factory::callAfterCreating() — Method in class Factory

Call the "after creating" callbacks for the given model instances.

Factory::count() — Method in class Factory

Specify how many models should be generated.

Factory::connection() — Method in class Factory

Specify the database connection that should be used to generate models.

Relationship::createFor() — Method in class Relationship

Create the child relationship for the given parent model.

$ Sequence#countProperty in class Sequence

The count of the sequence items.

Sequence::count() — Method in class Sequence

Get the current count of the sequence items.

$ InvalidCastException#columnProperty in class InvalidCastException

The name of the column.

$ InvalidCastException#castTypeProperty in class InvalidCastException

The name of the cast type.

$ Model#connectionProperty in class Model

The connection name for the model.

Model::clearBootedModels() — Method in class Model

Clear the list of booted models so they will be re-booted.

Model::callNamedScope() — Method in class Model

Apply the given named scope if possible.

Model::childRouteBindingRelationshipName() — Method in class Model

Retrieve the child route model binding relationship name for the given child type.

$ BelongsTo#childProperty in class BelongsTo

The child model instance of the relation.

BelongsToMany::cursorPaginate() — Method in class BelongsToMany

Paginate the given query into a cursor paginator.

BelongsToMany::chunk() — Method in class BelongsToMany

Chunk the results of the query.

BelongsToMany::chunkById() — Method in class BelongsToMany

Chunk the results of a query by comparing numeric IDs.

BelongsToMany::cursor() — Method in class BelongsToMany

Get a lazy collection for the given query.

BelongsToMany::create() — Method in class BelongsToMany

Create a new instance of the related model.

BelongsToMany::createMany() — Method in class BelongsToMany

Create an array of new instances of the related models.

BelongsToMany::createdAt() — Method in class BelongsToMany

Get the name of the "created at" column.

CanBeOneOfManyClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
ComparesRelatedModelsClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
ComparesRelatedModels::compareKeys() — Method in class ComparesRelatedModels

Compare the parent key with the related key.

InteractsWithPivotTable::castKeys() — Method in class InteractsWithPivotTable

Cast the given keys to integers if they are numeric and string otherwise.

InteractsWithPivotTable::castKey() — Method in class InteractsWithPivotTable

Cast the given key to convert to primary key type.

InteractsWithPivotTable::castAttributes() — Method in class InteractsWithPivotTable

Cast the given pivot attributes.

HasManyThrough::cursorPaginate() — Method in class HasManyThrough

Paginate the given query into a cursor paginator.

HasManyThrough::chunk() — Method in class HasManyThrough

Chunk the results of the query.

HasManyThrough::chunkById() — Method in class HasManyThrough

Chunk the results of a query by comparing numeric IDs.

HasManyThrough::cursor() — Method in class HasManyThrough

Get a generator for the given query.

HasOneOrMany::create() — Method in class HasOneOrMany

Create a new instance of the related model.

HasOneOrMany::createQuietly() — Method in class HasOneOrMany

Create a new instance of the related model without raising any events to the parent model.

HasOneOrMany::createMany() — Method in class HasOneOrMany

Create a Collection of new instances of the related model.

HasOneOrMany::createManyQuietly() — Method in class HasOneOrMany

Create a Collection of new instances of the related model without raising any events to the parent model.

MorphTo::createModelByType() — Method in class MorphTo

Create a new model instance by type.

MorphTo::constrain() — Method in class MorphTo

Specify constraints on the query for a given morph type.

$ Relation#constraintsProperty in class Relation

Indicates if the relation is adding constraints.

Relation::createdAt() — Method in class Relation

Get the name of the "created at" column.

ConnectionEstablishedClass in namespace Illuminate\Database\Events
ConnectionEventClass in namespace Illuminate\Database\Events
$ ConnectionEvent#connectionNameProperty in class ConnectionEvent

The name of the connection.

$ ConnectionEvent#connectionProperty in class ConnectionEvent

The database connection instance.

$ DatabaseBusy#connectionNameProperty in class DatabaseBusy

The database connection name.

$ DatabaseBusy#connectionsProperty in class DatabaseBusy

The number of open connections.

$ ModelsPruned#countProperty in class ModelsPruned

The number of pruned records.

$ QueryExecuted#connectionProperty in class QueryExecuted

The database connection instance.

$ QueryExecuted#connectionNameProperty in class QueryExecuted

The database connection name.

$ SchemaDumped#connectionProperty in class SchemaDumped

The database connection instance.

$ SchemaDumped#connectionNameProperty in class SchemaDumped

The database connection name.

$ SchemaLoaded#connectionProperty in class SchemaLoaded

The database connection instance.

$ SchemaLoaded#connectionNameProperty in class SchemaLoaded

The database connection name.

$ StatementPrepared#connectionProperty in class StatementPrepared

The database connection instance.

Grammar::columnize() — Method in class Grammar

Convert an array of column names into a delimited string.

$ MigrationServiceProvider#commandsProperty in class MigrationServiceProvider

The commands to be registered.

$ DatabaseMigrationRepository#connectionProperty in class DatabaseMigrationRepository

The name of the database connection to use.

DatabaseMigrationRepository::createRepository() — Method in class DatabaseMigrationRepository

Create the migration repository data store.

$ Migration#connectionProperty in class Migration

The name of the database connection to use.

$ MigrationCreator#customStubPathProperty in class MigrationCreator

The custom app stubs directory.

MigrationCreator::create() — Method in class MigrationCreator

Create a new migration at the given path.

MigrationRepositoryInterface::createRepository() — Method in class MigrationRepositoryInterface

Create the migration repository data store.

$ Migrator#connectionProperty in class Migrator

The name of the default connection.

$ MultipleRecordsFoundException#countProperty in class MultipleRecordsFoundException

The number of records found.

ConnectsToDatabaseClass in namespace Illuminate\Database\PDO\Concerns
ConnectsToDatabase::connect() — Method in class ConnectsToDatabase

Create a new database connection.

ConnectionClass in namespace Illuminate\Database\PDO
$ Connection#connectionProperty in class Connection

The underlying PDO connection.

Connection::createStatement() — Method in class Connection

Create a new statement instance.

Connection::commit() — Method in class Connection

Commit a database transaction.

$ SqlServerConnection#connectionProperty in class SqlServerConnection

The underlying connection instance.

SqlServerConnection::commit() — Method in class SqlServerConnection

Commit a database transaction.

SqlServerDriver::connect() — Method in class SqlServerDriver

Create a new database connection.

$ QueryException#connectionNameProperty in class QueryException

The database connection name.

$ Builder#connectionProperty in class Builder

The database connection instance.

$ Builder#columnsProperty in class Builder

The columns that should be returned.

Builder::createSub() — Method in class Builder

Creates a subquery and parse it.

Builder::crossJoin() — Method in class Builder

Add a "cross join" clause to the query.

Builder::crossJoinSub() — Method in class Builder

Add a subquery cross join to the query.

Builder::cursorPaginate() — Method in class Builder

Get a paginator only supporting simple next and previous links.

Builder::cloneForPaginationCount() — Method in class Builder

Clone the existing query instance for usage in a pagination subquery.

Builder::cursor() — Method in class Builder

Get a lazy collection for the given query.

Builder::count() — Method in class Builder

Retrieve the "count" result of the query.

Builder::castBinding() — Method in class Builder

Cast the given binding value.

Builder::cleanBindings() — Method in class Builder

Remove all of the expressions from a list of bindings.

Builder::clone() — Method in class Builder

Clone the query.

Builder::cloneWithout() — Method in class Builder

Clone the query without the given properties.

Builder::cloneWithoutBindings() — Method in class Builder

Clone the query without the given bindings.

Grammar::compileSelect() — Method in class Grammar

Compile a select query into SQL.

Grammar::compileComponents() — Method in class Grammar

Compile the components necessary for a select clause.

Grammar::compileAggregate() — Method in class Grammar

Compile an aggregated select clause.

Grammar::compileColumns() — Method in class Grammar

Compile the "select *" portion of the query.

Grammar::compileFrom() — Method in class Grammar

Compile the "from" portion of the query.

Grammar::compileJoins() — Method in class Grammar

Compile the "join" portions of the query.

Grammar::compileWheres() — Method in class Grammar

Compile the "where" portions of the query.

Grammar::compileWheresToArray() — Method in class Grammar

Get an array of all the where clauses for the query.

Grammar::concatenateWhereClauses() — Method in class Grammar

Format the where clause statements into one string.

Grammar::compileJsonContains() — Method in class Grammar

Compile a "JSON contains" statement into SQL.

Grammar::compileJsonContainsKey() — Method in class Grammar

Compile a "JSON contains key" statement into SQL.

Grammar::compileJsonLength() — Method in class Grammar

Compile a "JSON length" statement into SQL.

Grammar::compileJsonValueCast() — Method in class Grammar

Compile a "JSON value cast" statement into SQL.

Grammar::compileGroups() — Method in class Grammar

Compile the "group by" portions of the query.

Grammar::compileHavings() — Method in class Grammar

Compile the "having" portions of the query.

Grammar::compileHaving() — Method in class Grammar

Compile a single having clause.

Grammar::compileBasicHaving() — Method in class Grammar

Compile a basic having clause.

Grammar::compileHavingBetween() — Method in class Grammar

Compile a "between" having clause.

Grammar::compileHavingNull() — Method in class Grammar

Compile a having null clause.

Grammar::compileHavingNotNull() — Method in class Grammar

Compile a having not null clause.

Grammar::compileHavingBit() — Method in class Grammar

Compile a having clause involving a bit operator.

Grammar::compileNestedHavings() — Method in class Grammar

Compile a nested having clause.

Grammar::compileOrders() — Method in class Grammar

Compile the "order by" portions of the query.

Grammar::compileOrdersToArray() — Method in class Grammar

Compile the query orders to an array.

Grammar::compileRandom() — Method in class Grammar

Compile the random statement into SQL.

Grammar::compileLimit() — Method in class Grammar

Compile the "limit" portions of the query.

Grammar::compileOffset() — Method in class Grammar

Compile the "offset" portions of the query.

Grammar::compileUnions() — Method in class Grammar

Compile the "union" queries attached to the main query.

Grammar::compileUnion() — Method in class Grammar

Compile a single union statement.

Grammar::compileUnionAggregate() — Method in class Grammar

Compile a union aggregate query into SQL.

Grammar::compileExists() — Method in class Grammar

Compile an exists statement into SQL.

Grammar::compileInsert() — Method in class Grammar

Compile an insert statement into SQL.

Grammar::compileInsertOrIgnore() — Method in class Grammar

Compile an insert ignore statement into SQL.

Grammar::compileInsertGetId() — Method in class Grammar

Compile an insert and get ID statement into SQL.

Grammar::compileInsertUsing() — Method in class Grammar

Compile an insert statement using a subquery into SQL.

Grammar::compileUpdate() — Method in class Grammar

Compile an update statement into SQL.

Grammar::compileUpdateColumns() — Method in class Grammar

Compile the columns for an update statement.

Grammar::compileUpdateWithoutJoins() — Method in class Grammar

Compile an update statement without joins into SQL.

Grammar::compileUpdateWithJoins() — Method in class Grammar

Compile an update statement with joins into SQL.

Grammar::compileUpsert() — Method in class Grammar

Compile an "upsert" statement into SQL.

Grammar::compileDelete() — Method in class Grammar

Compile a delete statement into SQL.

Grammar::compileDeleteWithoutJoins() — Method in class Grammar

Compile a delete statement without joins into SQL.

Grammar::compileDeleteWithJoins() — Method in class Grammar

Compile a delete statement with joins into SQL.

Grammar::compileTruncate() — Method in class Grammar

Compile a truncate table statement into SQL.

Grammar::compileLock() — Method in class Grammar

Compile the lock into SQL.

Grammar::compileSavepoint() — Method in class Grammar

Compile the SQL statement to define a savepoint.

Grammar::compileSavepointRollBack() — Method in class Grammar

Compile the SQL statement to execute a savepoint rollback.

Grammar::concatenate() — Method in class Grammar

Concatenate an array of segments, removing empties.

MySqlGrammar::compileIndexHint() — Method in class MySqlGrammar

Compile the index hints for the query.

MySqlGrammar::compileInsertOrIgnore() — Method in class MySqlGrammar

Compile an insert ignore statement into SQL.

MySqlGrammar::compileJsonContains() — Method in class MySqlGrammar

Compile a "JSON contains" statement into SQL.

MySqlGrammar::compileJsonContainsKey() — Method in class MySqlGrammar

Compile a "JSON contains key" statement into SQL.

MySqlGrammar::compileJsonLength() — Method in class MySqlGrammar

Compile a "JSON length" statement into SQL.

MySqlGrammar::compileJsonValueCast() — Method in class MySqlGrammar

Compile a "JSON value cast" statement into SQL.

MySqlGrammar::compileRandom() — Method in class MySqlGrammar

Compile the random statement into SQL.

MySqlGrammar::compileLock() — Method in class MySqlGrammar

Compile the lock into SQL.

MySqlGrammar::compileInsert() — Method in class MySqlGrammar

Compile an insert statement into SQL.

MySqlGrammar::compileUpdateColumns() — Method in class MySqlGrammar

Compile the columns for an update statement.

MySqlGrammar::compileUpsert() — Method in class MySqlGrammar

Compile an "upsert" statement into SQL.

MySqlGrammar::compileJsonUpdateColumn() — Method in class MySqlGrammar

Prepare a JSON column being updated using the JSON_SET function.

MySqlGrammar::compileUpdateWithoutJoins() — Method in class MySqlGrammar

Compile an update statement without joins into SQL.

MySqlGrammar::compileDeleteWithoutJoins() — Method in class MySqlGrammar

Compile a delete query that does not use joins.

PostgresGrammar::compileColumns() — Method in class PostgresGrammar

Compile the "select *" portion of the query.

PostgresGrammar::compileJsonContains() — Method in class PostgresGrammar

Compile a "JSON contains" statement into SQL.

PostgresGrammar::compileJsonContainsKey() — Method in class PostgresGrammar

Compile a "JSON contains key" statement into SQL.

PostgresGrammar::compileJsonLength() — Method in class PostgresGrammar

Compile a "JSON length" statement into SQL.

PostgresGrammar::compileHaving() — Method in class PostgresGrammar

Compile a single having clause.

PostgresGrammar::compileHavingBitwise() — Method in class PostgresGrammar

Compile a having clause involving a bitwise operator.

PostgresGrammar::compileLock() — Method in class PostgresGrammar

Compile the lock into SQL.

PostgresGrammar::compileInsertOrIgnore() — Method in class PostgresGrammar

Compile an insert ignore statement into SQL.

PostgresGrammar::compileInsertGetId() — Method in class PostgresGrammar

Compile an insert and get ID statement into SQL.

PostgresGrammar::compileUpdate() — Method in class PostgresGrammar

Compile an update statement into SQL.

PostgresGrammar::compileUpdateColumns() — Method in class PostgresGrammar

Compile the columns for an update statement.

PostgresGrammar::compileUpsert() — Method in class PostgresGrammar

Compile an "upsert" statement into SQL.

PostgresGrammar::compileJsonUpdateColumn() — Method in class PostgresGrammar

Prepares a JSON column being updated using the JSONB_SET function.

PostgresGrammar::compileUpdateFrom() — Method in class PostgresGrammar

Compile an update from statement into SQL.

PostgresGrammar::compileUpdateWheres() — Method in class PostgresGrammar

Compile the additional where clauses for updates with joins.

PostgresGrammar::compileUpdateJoinWheres() — Method in class PostgresGrammar

Compile the "join" clause where clauses for an update.

PostgresGrammar::compileUpdateWithJoinsOrLimit() — Method in class PostgresGrammar

Compile an update statement with joins or limit into SQL.

PostgresGrammar::compileDelete() — Method in class PostgresGrammar

Compile a delete statement into SQL.

PostgresGrammar::compileDeleteWithJoinsOrLimit() — Method in class PostgresGrammar

Compile a delete statement with joins or limit into SQL.

PostgresGrammar::compileTruncate() — Method in class PostgresGrammar

Compile a truncate table statement into SQL.

SQLiteGrammar::compileLock() — Method in class SQLiteGrammar

Compile the lock into SQL.

SQLiteGrammar::compileIndexHint() — Method in class SQLiteGrammar

Compile the index hints for the query.

SQLiteGrammar::compileJsonLength() — Method in class SQLiteGrammar

Compile a "JSON length" statement into SQL.

SQLiteGrammar::compileJsonContainsKey() — Method in class SQLiteGrammar

Compile a "JSON contains key" statement into SQL.

SQLiteGrammar::compileUpdate() — Method in class SQLiteGrammar

Compile an update statement into SQL.

SQLiteGrammar::compileInsertOrIgnore() — Method in class SQLiteGrammar

Compile an insert ignore statement into SQL.

SQLiteGrammar::compileUpdateColumns() — Method in class SQLiteGrammar

Compile the columns for an update statement.

SQLiteGrammar::compileUpsert() — Method in class SQLiteGrammar

Compile an "upsert" statement into SQL.

SQLiteGrammar::compileJsonPatch() — Method in class SQLiteGrammar

Compile a "JSON" patch statement into SQL.

SQLiteGrammar::compileUpdateWithJoinsOrLimit() — Method in class SQLiteGrammar

Compile an update statement with joins or limit into SQL.

SQLiteGrammar::compileDelete() — Method in class SQLiteGrammar

Compile a delete statement into SQL.

SQLiteGrammar::compileDeleteWithJoinsOrLimit() — Method in class SQLiteGrammar

Compile a delete statement with joins or limit into SQL.

SQLiteGrammar::compileTruncate() — Method in class SQLiteGrammar

Compile a truncate table statement into SQL.

SqlServerGrammar::compileSelect() — Method in class SqlServerGrammar

Compile a select query into SQL.

SqlServerGrammar::compileColumns() — Method in class SqlServerGrammar

Compile the "select *" portion of the query.

SqlServerGrammar::compileFrom() — Method in class SqlServerGrammar

Compile the "from" portion of the query.

SqlServerGrammar::compileIndexHint() — Method in class SqlServerGrammar

Compile the index hints for the query.

SqlServerGrammar::compileJsonContains() — Method in class SqlServerGrammar

Compile a "JSON contains" statement into SQL.

SqlServerGrammar::compileJsonContainsKey() — Method in class SqlServerGrammar

Compile a "JSON contains key" statement into SQL.

SqlServerGrammar::compileJsonLength() — Method in class SqlServerGrammar

Compile a "JSON length" statement into SQL.

SqlServerGrammar::compileJsonValueCast() — Method in class SqlServerGrammar

Compile a "JSON value cast" statement into SQL.

SqlServerGrammar::compileHaving() — Method in class SqlServerGrammar

Compile a single having clause.

SqlServerGrammar::compileHavingBitwise() — Method in class SqlServerGrammar

Compile a having clause involving a bitwise operator.

SqlServerGrammar::compileRowConstraint() — Method in class SqlServerGrammar

Compile the limit / offset row constraint for a query.

SqlServerGrammar::compileDeleteWithoutJoins() — Method in class SqlServerGrammar

Compile a delete statement without joins into SQL.

SqlServerGrammar::compileRandom() — Method in class SqlServerGrammar

Compile the random statement into SQL.

SqlServerGrammar::compileLimit() — Method in class SqlServerGrammar

Compile the "limit" portions of the query.

SqlServerGrammar::compileOffset() — Method in class SqlServerGrammar

Compile the "offset" portions of the query.

SqlServerGrammar::compileLock() — Method in class SqlServerGrammar

Compile the lock into SQL.

SqlServerGrammar::compileExists() — Method in class SqlServerGrammar

Compile an exists statement into SQL.

SqlServerGrammar::compileUpdateWithJoins() — Method in class SqlServerGrammar

Compile an update statement with joins into SQL.

SqlServerGrammar::compileUpsert() — Method in class SqlServerGrammar

Compile an "upsert" statement into SQL.

SqlServerGrammar::compileSavepoint() — Method in class SqlServerGrammar

Compile the SQL statement to define a savepoint.

SqlServerGrammar::compileSavepointRollBack() — Method in class SqlServerGrammar

Compile the SQL statement to execute a savepoint rollback.

$ Blueprint#columnsProperty in class Blueprint

The columns that should be added to the table.

$ Blueprint#commandsProperty in class Blueprint

The commands that should be run for the table.

$ Blueprint#charsetProperty in class Blueprint

The default character set that should be used for the table.

$ Blueprint#collationProperty in class Blueprint

The collation that should be used for the table.

Blueprint::commandsNamed() — Method in class Blueprint

Get all of the commands matching the given names.

Blueprint::creating() — Method in class Blueprint

Determine if the blueprint has a create command.

Blueprint::create() — Method in class Blueprint

Indicate that the table needs to be created.

Blueprint::char() — Method in class Blueprint

Create a new char column on the table.

Blueprint::computed() — Method in class Blueprint

Create a new generated, computed column on the table.

Blueprint::comment() — Method in class Blueprint

Add a comment to the table.

Blueprint::createIndexName() — Method in class Blueprint

Create a default index name for the table.

Blueprint::createCommand() — Method in class Blueprint

Create a new Fluent command.

$ Builder#connectionProperty in class Builder

The database connection instance.

Builder::createDatabase() — Method in class Builder

Create a database in the schema.

Builder::create() — Method in class Builder

Create a new table on the schema.

Builder::createBlueprint() — Method in class Builder

Create a new command set with a Closure.

ColumnDefinitionClass in namespace Illuminate\Database\Schema
ColumnDefinition::change() — Method in class ColumnDefinition

Change the column

ColumnDefinition::charset() — Method in class ColumnDefinition
ColumnDefinition::collation() — Method in class ColumnDefinition
ColumnDefinition::comment() — Method in class ColumnDefinition
ForeignIdColumnDefinition::constrained() — Method in class ForeignIdColumnDefinition

Create a foreign key constraint on this column referencing the "id" column of the conventionally related table.

ForeignKeyDefinition::cascadeOnUpdate() — Method in class ForeignKeyDefinition

Indicate that updates should cascade.

ForeignKeyDefinition::cascadeOnDelete() — Method in class ForeignKeyDefinition

Indicate that deletes should cascade.

ChangeColumnClass in namespace Illuminate\Database\Schema\Grammars
ChangeColumn::compile() — Method in class ChangeColumn

Compile a change column command into a series of SQL statements.

ChangeColumn::calculateDoctrineTextLength() — Method in class ChangeColumn

Calculate the proper column length to force the Doctrine text type.

Grammar::compileCreateDatabase() — Method in class Grammar

Compile a create database command.

Grammar::compileDropDatabaseIfExists() — Method in class Grammar

Compile a drop database if exists command.

Grammar::compileRenameColumn() — Method in class Grammar

Compile a rename column command.

Grammar::compileChange() — Method in class Grammar

Compile a change column command into a series of SQL statements.

Grammar::compileFulltext() — Method in class Grammar

Compile a fulltext index key command.

Grammar::compileDropFullText() — Method in class Grammar

Compile a drop fulltext index command.

Grammar::compileForeign() — Method in class Grammar

Compile a foreign key command.

MySqlGrammar::compileCreateDatabase() — Method in class MySqlGrammar

Compile a create database command.

MySqlGrammar::compileDropDatabaseIfExists() — Method in class MySqlGrammar

Compile a drop database if exists command.

MySqlGrammar::compileTableExists() — Method in class MySqlGrammar

Compile the query to determine the list of tables.

MySqlGrammar::compileColumnListing() — Method in class MySqlGrammar

Compile the query to determine the list of columns.

MySqlGrammar::compileCreate() — Method in class MySqlGrammar

Compile a create table command.

MySqlGrammar::compileCreateTable() — Method in class MySqlGrammar

Create the main create table clause.

MySqlGrammar::compileCreateEncoding() — Method in class MySqlGrammar

Append the character set specifications to a command.

MySqlGrammar::compileCreateEngine() — Method in class MySqlGrammar

Append the engine specifications to a command.

MySqlGrammar::compileAdd() — Method in class MySqlGrammar

Compile an add column command.

MySqlGrammar::compileAutoIncrementStartingValues() — Method in class MySqlGrammar

Compile the auto-incrementing column starting values.

MySqlGrammar::compileRenameColumn() — Method in class MySqlGrammar

Compile a rename column command.

MySqlGrammar::compileChange() — Method in class MySqlGrammar

Compile a change column command into a series of SQL statements.

MySqlGrammar::compilePrimary() — Method in class MySqlGrammar

Compile a primary key command.

MySqlGrammar::compileUnique() — Method in class MySqlGrammar

Compile a unique key command.

MySqlGrammar::compileIndex() — Method in class MySqlGrammar

Compile a plain index key command.

MySqlGrammar::compileFullText() — Method in class MySqlGrammar

Compile a fulltext index key command.

MySqlGrammar::compileSpatialIndex() — Method in class MySqlGrammar

Compile a spatial index key command.

MySqlGrammar::compileKey() — Method in class MySqlGrammar

Compile an index creation command.

MySqlGrammar::compileDrop() — Method in class MySqlGrammar

Compile a drop table command.

MySqlGrammar::compileDropIfExists() — Method in class MySqlGrammar

Compile a drop table (if exists) command.

MySqlGrammar::compileDropColumn() — Method in class MySqlGrammar

Compile a drop column command.

MySqlGrammar::compileDropPrimary() — Method in class MySqlGrammar

Compile a drop primary key command.

MySqlGrammar::compileDropUnique() — Method in class MySqlGrammar

Compile a drop unique key command.

MySqlGrammar::compileDropIndex() — Method in class MySqlGrammar

Compile a drop index command.

MySqlGrammar::compileDropFullText() — Method in class MySqlGrammar

Compile a drop fulltext index command.

MySqlGrammar::compileDropSpatialIndex() — Method in class MySqlGrammar

Compile a drop spatial index command.

MySqlGrammar::compileDropForeign() — Method in class MySqlGrammar

Compile a drop foreign key command.

MySqlGrammar::compileRename() — Method in class MySqlGrammar

Compile a rename table command.

MySqlGrammar::compileRenameIndex() — Method in class MySqlGrammar

Compile a rename index command.

MySqlGrammar::compileDropAllTables() — Method in class MySqlGrammar

Compile the SQL needed to drop all tables.

MySqlGrammar::compileDropAllViews() — Method in class MySqlGrammar

Compile the SQL needed to drop all views.

MySqlGrammar::compileGetAllTables() — Method in class MySqlGrammar

Compile the SQL needed to retrieve all table names.

MySqlGrammar::compileGetAllViews() — Method in class MySqlGrammar

Compile the SQL needed to retrieve all view names.

MySqlGrammar::compileEnableForeignKeyConstraints() — Method in class MySqlGrammar

Compile the command to enable foreign key constraints.

MySqlGrammar::compileDisableForeignKeyConstraints() — Method in class MySqlGrammar

Compile the command to disable foreign key constraints.

MySqlGrammar::compileTableComment() — Method in class MySqlGrammar

Compile a table comment command.

PostgresGrammar::compileCreateDatabase() — Method in class PostgresGrammar

Compile a create database command.

PostgresGrammar::compileDropDatabaseIfExists() — Method in class PostgresGrammar

Compile a drop database if exists command.

PostgresGrammar::compileTableExists() — Method in class PostgresGrammar

Compile the query to determine if a table exists.

PostgresGrammar::compileColumnListing() — Method in class PostgresGrammar

Compile the query to determine the list of columns.

PostgresGrammar::compileCreate() — Method in class PostgresGrammar

Compile a create table command.

PostgresGrammar::compileAdd() — Method in class PostgresGrammar

Compile a column addition command.

PostgresGrammar::compileAutoIncrementStartingValues() — Method in class PostgresGrammar

Compile the auto-incrementing column starting values.

PostgresGrammar::compileRenameColumn() — Method in class PostgresGrammar

Compile a rename column command.

PostgresGrammar::compileChange() — Method in class PostgresGrammar

Compile a change column command into a series of SQL statements.

PostgresGrammar::compilePrimary() — Method in class PostgresGrammar

Compile a primary key command.

PostgresGrammar::compileUnique() — Method in class PostgresGrammar

Compile a unique key command.

PostgresGrammar::compileIndex() — Method in class PostgresGrammar

Compile a plain index key command.

PostgresGrammar::compileFulltext() — Method in class PostgresGrammar

Compile a fulltext index key command.

PostgresGrammar::compileSpatialIndex() — Method in class PostgresGrammar

Compile a spatial index key command.

PostgresGrammar::compileForeign() — Method in class PostgresGrammar

Compile a foreign key command.

PostgresGrammar::compileDrop() — Method in class PostgresGrammar

Compile a drop table command.

PostgresGrammar::compileDropIfExists() — Method in class PostgresGrammar

Compile a drop table (if exists) command.

PostgresGrammar::compileDropAllTables() — Method in class PostgresGrammar

Compile the SQL needed to drop all tables.

PostgresGrammar::compileDropAllViews() — Method in class PostgresGrammar

Compile the SQL needed to drop all views.

PostgresGrammar::compileDropAllTypes() — Method in class PostgresGrammar

Compile the SQL needed to drop all types.

PostgresGrammar::compileGetAllTables() — Method in class PostgresGrammar

Compile the SQL needed to retrieve all table names.

PostgresGrammar::compileGetAllViews() — Method in class PostgresGrammar

Compile the SQL needed to retrieve all view names.

PostgresGrammar::compileGetAllTypes() — Method in class PostgresGrammar

Compile the SQL needed to retrieve all type names.

PostgresGrammar::compileDropColumn() — Method in class PostgresGrammar

Compile a drop column command.

PostgresGrammar::compileDropPrimary() — Method in class PostgresGrammar

Compile a drop primary key command.

PostgresGrammar::compileDropUnique() — Method in class PostgresGrammar

Compile a drop unique key command.

PostgresGrammar::compileDropIndex() — Method in class PostgresGrammar

Compile a drop index command.

PostgresGrammar::compileDropFullText() — Method in class PostgresGrammar

Compile a drop fulltext index command.

PostgresGrammar::compileDropSpatialIndex() — Method in class PostgresGrammar

Compile a drop spatial index command.

PostgresGrammar::compileDropForeign() — Method in class PostgresGrammar

Compile a drop foreign key command.

PostgresGrammar::compileRename() — Method in class PostgresGrammar

Compile a rename table command.

PostgresGrammar::compileRenameIndex() — Method in class PostgresGrammar

Compile a rename index command.

PostgresGrammar::compileEnableForeignKeyConstraints() — Method in class PostgresGrammar

Compile the command to enable foreign key constraints.

PostgresGrammar::compileDisableForeignKeyConstraints() — Method in class PostgresGrammar

Compile the command to disable foreign key constraints.

PostgresGrammar::compileComment() — Method in class PostgresGrammar

Compile a comment command.

PostgresGrammar::compileTableComment() — Method in class PostgresGrammar

Compile a table comment command.

RenameColumn::compile() — Method in class RenameColumn

Compile a rename column command.

SQLiteGrammar::compileTableExists() — Method in class SQLiteGrammar

Compile the query to determine if a table exists.

SQLiteGrammar::compileColumnListing() — Method in class SQLiteGrammar

Compile the query to determine the list of columns.

SQLiteGrammar::compileCreate() — Method in class SQLiteGrammar

Compile a create table command.

SQLiteGrammar::compileAdd() — Method in class SQLiteGrammar

Compile alter table commands for adding columns.

SQLiteGrammar::compileRenameColumn() — Method in class SQLiteGrammar

Compile a rename column command.

SQLiteGrammar::compileUnique() — Method in class SQLiteGrammar

Compile a unique key command.

SQLiteGrammar::compileIndex() — Method in class SQLiteGrammar

Compile a plain index key command.

SQLiteGrammar::compileSpatialIndex() — Method in class SQLiteGrammar

Compile a spatial index key command.

SQLiteGrammar::compileForeign() — Method in class SQLiteGrammar

Compile a foreign key command.

SQLiteGrammar::compileDrop() — Method in class SQLiteGrammar

Compile a drop table command.

SQLiteGrammar::compileDropIfExists() — Method in class SQLiteGrammar

Compile a drop table (if exists) command.

SQLiteGrammar::compileDropAllTables() — Method in class SQLiteGrammar

Compile the SQL needed to drop all tables.

SQLiteGrammar::compileDropAllViews() — Method in class SQLiteGrammar

Compile the SQL needed to drop all views.

SQLiteGrammar::compileGetAllTables() — Method in class SQLiteGrammar

Compile the SQL needed to retrieve all table names.

SQLiteGrammar::compileGetAllViews() — Method in class SQLiteGrammar

Compile the SQL needed to retrieve all view names.

SQLiteGrammar::compileRebuild() — Method in class SQLiteGrammar

Compile the SQL needed to rebuild the database.

SQLiteGrammar::compileDropColumn() — Method in class SQLiteGrammar

Compile a drop column command.

SQLiteGrammar::compileDropUnique() — Method in class SQLiteGrammar

Compile a drop unique key command.

SQLiteGrammar::compileDropIndex() — Method in class SQLiteGrammar

Compile a drop index command.

SQLiteGrammar::compileDropSpatialIndex() — Method in class SQLiteGrammar

Compile a drop spatial index command.

SQLiteGrammar::compileRename() — Method in class SQLiteGrammar

Compile a rename table command.

SQLiteGrammar::compileRenameIndex() — Method in class SQLiteGrammar

Compile a rename index command.

SQLiteGrammar::compileEnableForeignKeyConstraints() — Method in class SQLiteGrammar

Compile the command to enable foreign key constraints.

SQLiteGrammar::compileDisableForeignKeyConstraints() — Method in class SQLiteGrammar

Compile the command to disable foreign key constraints.

SQLiteGrammar::compileEnableWriteableSchema() — Method in class SQLiteGrammar

Compile the SQL needed to enable a writable schema.

SQLiteGrammar::compileDisableWriteableSchema() — Method in class SQLiteGrammar

Compile the SQL needed to disable a writable schema.

SqlServerGrammar::compileCreateDatabase() — Method in class SqlServerGrammar

Compile a create database command.

SqlServerGrammar::compileDropDatabaseIfExists() — Method in class SqlServerGrammar

Compile a drop database if exists command.

SqlServerGrammar::compileTableExists() — Method in class SqlServerGrammar

Compile the query to determine if a table exists.

SqlServerGrammar::compileColumnListing() — Method in class SqlServerGrammar

Compile the query to determine the list of columns.

SqlServerGrammar::compileCreate() — Method in class SqlServerGrammar

Compile a create table command.

SqlServerGrammar::compileAdd() — Method in class SqlServerGrammar

Compile a column addition table command.

SqlServerGrammar::compileRenameColumn() — Method in class SqlServerGrammar

Compile a rename column command.

SqlServerGrammar::compileChange() — Method in class SqlServerGrammar

Compile a change column command into a series of SQL statements.

SqlServerGrammar::compilePrimary() — Method in class SqlServerGrammar

Compile a primary key command.

SqlServerGrammar::compileUnique() — Method in class SqlServerGrammar

Compile a unique key command.

SqlServerGrammar::compileIndex() — Method in class SqlServerGrammar

Compile a plain index key command.

SqlServerGrammar::compileSpatialIndex() — Method in class SqlServerGrammar

Compile a spatial index key command.

SqlServerGrammar::compileDefault() — Method in class SqlServerGrammar

Compile a default command.

SqlServerGrammar::compileDrop() — Method in class SqlServerGrammar

Compile a drop table command.

SqlServerGrammar::compileDropIfExists() — Method in class SqlServerGrammar

Compile a drop table (if exists) command.

SqlServerGrammar::compileDropAllTables() — Method in class SqlServerGrammar

Compile the SQL needed to drop all tables.

SqlServerGrammar::compileDropColumn() — Method in class SqlServerGrammar

Compile a drop column command.

SqlServerGrammar::compileDropDefaultConstraint() — Method in class SqlServerGrammar

Compile a drop default constraint command.

SqlServerGrammar::compileDropPrimary() — Method in class SqlServerGrammar

Compile a drop primary key command.

SqlServerGrammar::compileDropUnique() — Method in class SqlServerGrammar

Compile a drop unique key command.

SqlServerGrammar::compileDropIndex() — Method in class SqlServerGrammar

Compile a drop index command.

SqlServerGrammar::compileDropSpatialIndex() — Method in class SqlServerGrammar

Compile a drop spatial index command.

SqlServerGrammar::compileDropForeign() — Method in class SqlServerGrammar

Compile a drop foreign key command.

SqlServerGrammar::compileRename() — Method in class SqlServerGrammar

Compile a rename table command.

SqlServerGrammar::compileRenameIndex() — Method in class SqlServerGrammar

Compile a rename index command.

SqlServerGrammar::compileEnableForeignKeyConstraints() — Method in class SqlServerGrammar

Compile the command to enable foreign key constraints.

SqlServerGrammar::compileDisableForeignKeyConstraints() — Method in class SqlServerGrammar

Compile the command to disable foreign key constraints.

SqlServerGrammar::compileDropAllForeignKeys() — Method in class SqlServerGrammar

Compile the command to drop all foreign keys.

SqlServerGrammar::compileDropAllViews() — Method in class SqlServerGrammar

Compile the command to drop all views.

SqlServerGrammar::compileGetAllTables() — Method in class SqlServerGrammar

Compile the SQL needed to retrieve all table names.

SqlServerGrammar::compileGetAllViews() — Method in class SqlServerGrammar

Compile the SQL needed to retrieve all view names.

MySqlBuilder::createDatabase() — Method in class MySqlBuilder

Create a database in the schema.

MySqlSchemaState::connectionString() — Method in class MySqlSchemaState

Generate a basic connection string (--socket, --host, --port, --user, --password) for the database.

PostgresBuilder::createDatabase() — Method in class PostgresBuilder

Create a database in the schema.

SQLiteBuilder::createDatabase() — Method in class SQLiteBuilder

Create a database in the schema.

$ SchemaState#connectionProperty in class SchemaState

The connection instance.

SqlServerBuilder::createDatabase() — Method in class SqlServerBuilder

Create a database in the schema.

$ Seeder#containerProperty in class Seeder

The container instance.

$ Seeder#commandProperty in class Seeder

The console command instance.

$ Seeder#calledProperty in class Seeder

Seeders that have been called at least one time.

Seeder::call() — Method in class Seeder

Run the given seeder class.

Seeder::callWith() — Method in class Seeder

Run the given seeder class.

Seeder::callSilent() — Method in class Seeder

Silently run the given seeder class.

Seeder::callOnce() — Method in class Seeder

Run the given seeder class once.

$ Encrypter#cipherProperty in class Encrypter

The algorithm used for encryption.

CallQueuedListenerClass in namespace Illuminate\Events
$ CallQueuedListener#classProperty in class CallQueuedListener

The listener class name.

$ Dispatcher#containerProperty in class Dispatcher

The IoC container instance.

Dispatcher::createClassListener() — Method in class Dispatcher

Create a class based listener using the IoC container.

Dispatcher::createClassCallable() — Method in class Dispatcher

Create the class based event callable.

Dispatcher::createQueuedHandlerCallable() — Method in class Dispatcher

Create a callable for putting an event handler on the queue.

Dispatcher::createCallbackForListenerRunningAfterCommits() — Method in class Dispatcher

Create a callable for dispatching a listener after database transactions.

Dispatcher::createListenerAndJob() — Method in class Dispatcher

Create the listener and job for a queued listener.

$ QueuedClosure#closureProperty in class QueuedClosure

The underlying Closure.

$ QueuedClosure#connectionProperty in class QueuedClosure

The name of the connection the job should be sent to.

$ QueuedClosure#catchCallbacksProperty in class QueuedClosure

All of the "catch" callbacks for the queued closure.

QueuedClosure::catch() — Method in class QueuedClosure

Specify a callback that should be invoked if the queued listener job fails.

$ AwsS3V3Adapter#clientProperty in class AwsS3V3Adapter

The AWS S3 client.

Filesystem::chmod() — Method in class Filesystem

Get or set UNIX mode of a file or directory.

Filesystem::copy() — Method in class Filesystem

Copy a file to a new location.

Filesystem::copyDirectory() — Method in class Filesystem

Copy a directory from one location to another.

Filesystem::cleanDirectory() — Method in class Filesystem

Empty the specified directory of all files and folders.

$ FilesystemAdapter#configProperty in class FilesystemAdapter

The filesystem configuration.

FilesystemAdapter::copy() — Method in class FilesystemAdapter

Copy a file to a new location.

FilesystemAdapter::checksum() — Method in class FilesystemAdapter

Get the checksum for a file.

FilesystemAdapter::concatPathToUrl() — Method in class FilesystemAdapter

Concatenate a path to a URL.

$ FilesystemManager#customCreatorsProperty in class FilesystemManager

The registered custom driver creators.

FilesystemManager::cloud() — Method in class FilesystemManager

Get a default cloud filesystem instance.

FilesystemManager::callCustomCreator() — Method in class FilesystemManager

Call a custom driver creator.

FilesystemManager::createLocalDriver() — Method in class FilesystemManager

Create an instance of the local driver.

FilesystemManager::createFtpDriver() — Method in class FilesystemManager

Create an instance of the ftp driver.

FilesystemManager::createSftpDriver() — Method in class FilesystemManager

Create an instance of the sftp driver.

FilesystemManager::createS3Driver() — Method in class FilesystemManager

Create an instance of the Amazon S3 driver.

FilesystemManager::createScopedDriver() — Method in class FilesystemManager

Create a scoped driver.

FilesystemManager::createFlysystem() — Method in class FilesystemManager

Create a Flysystem instance with the given adapter.

LockableFile::createResource() — Method in class LockableFile

Create the file resource.

LockableFile::close() — Method in class LockableFile

Close the file.

$ Application#configPathProperty in class Application

The custom configuration path defined by the developer.

Application::configPath() — Method in class Application

Get the path to the application configuration files.

Application::configurationIsCached() — Method in class Application

Determine if the application configuration is cached.

Application::currentLocale() — Method in class Application

Get the current application locale.

Authorizable::can() — Method in class Authorizable

Determine if the entity has the given abilities.

Authorizable::canAny() — Method in class Authorizable

Determine if the entity has any of the given abilities.

Authorizable::cant() — Method in class Authorizable

Determine if the entity does not have the given abilities.

Authorizable::cannot() — Method in class Authorizable

Determine if the entity does not have the given abilities.

LoadEnvironmentVariables::checkForSpecificEnvironmentFile() — Method in class LoadEnvironmentVariables

Detect if a custom environment file matching the APP_ENV exists.

LoadEnvironmentVariables::createDotenv() — Method in class LoadEnvironmentVariables

Create a Dotenv instance.

$ PendingChain#chainProperty in class PendingChain

The jobs to be chained.

$ PendingChain#connectionProperty in class PendingChain

The name of the connection the chain should be sent to.

$ PendingChain#catchCallbacksProperty in class PendingChain

The callbacks to be executed on failure.

PendingChain::catch() — Method in class PendingChain

Add a callback to be executed on job failure.

PendingChain::catchCallbacks() — Method in class PendingChain

Get the "catch" callbacks that have been registered.

PendingClosureDispatch::catch() — Method in class PendingClosureDispatch

Add a callback to be executed if the job fails.

PendingDispatch::chain() — Method in class PendingDispatch

Set the jobs that should run if this job is successful.

CacheBasedMaintenanceModeClass in namespace Illuminate\Foundation
$ CacheBasedMaintenanceMode#cacheProperty in class CacheBasedMaintenanceMode

The cache factory.

ComposerScriptsClass in namespace Illuminate\Foundation
ComposerScripts::clearCompiled() — Method in class ComposerScripts

Clear the cached Laravel bootstrapping files.

$ AboutCommand#composerProperty in class AboutCommand

The Composer instance.

$ AboutCommand#customDataResolversProperty in class AboutCommand

The registered callables that add custom data to the command output.

CastMakeCommandClass in namespace Illuminate\Foundation\Console
ChannelListCommandClass in namespace Illuminate\Foundation\Console
ChannelMakeCommandClass in namespace Illuminate\Foundation\Console
ClearCompiledCommandClass in namespace Illuminate\Foundation\Console
CliDumperClass in namespace Illuminate\Foundation\Console
$ CliDumper#compiledViewPathProperty in class CliDumper

The compiled view path for the application.

ClosureCommandClass in namespace Illuminate\Foundation\Console
$ ClosureCommand#callbackProperty in class ClosureCommand

The command callback.

ComponentMakeCommandClass in namespace Illuminate\Foundation\Console
ConfigCacheCommandClass in namespace Illuminate\Foundation\Console
ConfigClearCommandClass in namespace Illuminate\Foundation\Console
ConsoleMakeCommandClass in namespace Illuminate\Foundation\Console
$ DocsCommand#cacheProperty in class DocsCommand

The cache repository implementation.

DocsCommand::configure() — Method in class DocsCommand

Configure the current command.

$ Kernel#commandsProperty in class Kernel

The Artisan commands provided by the application.

$ Kernel#commandsLoadedProperty in class Kernel

Indicates if the Closure commands have been loaded.

$ Kernel#commandLifecycleDurationHandlersProperty in class Kernel

All of the registered command duration handlers.

$ Kernel#commandStartedAtProperty in class Kernel

When the currently handled command started.

Kernel::commandStartedAt() — Method in class Kernel

When the command being handled started.

Kernel::commands() — Method in class Kernel

Register the commands for the application.

Kernel::command() — Method in class Kernel

Register a Closure based command with the application.

Kernel::call() — Method in class Kernel

Run an Artisan console command by name.

ModelMakeCommand::createFactory() — Method in class ModelMakeCommand

Create a model factory for the model.

ModelMakeCommand::createMigration() — Method in class ModelMakeCommand

Create a migration file for the model.

ModelMakeCommand::createSeeder() — Method in class ModelMakeCommand

Create a seeder file for the model.

ModelMakeCommand::createController() — Method in class ModelMakeCommand

Create a controller for the model.

ModelMakeCommand::createPolicy() — Method in class ModelMakeCommand

Create a policy file for the model.

ResourceMakeCommand::collection() — Method in class ResourceMakeCommand

Determine if the command is generating a resource collection.

ServeCommand::canTryAnotherPort() — Method in class ServeCommand

Check if the command has reached its maximum number of port tries.

VendorPublishCommand::createParentDirectory() — Method in class VendorPublishCommand

Create the directory to house the published files if needed.

ViewCacheCommand::compileViews() — Method in class ViewCacheCommand

Compile the given view files.

DiscoverEvents::classFromFile() — Method in class DiscoverEvents

Extract the class name from the given file path.

$ Handler#containerProperty in class Handler

The container implementation.

Handler::context() — Method in class Handler

Get the default context variables for logging.

Handler::convertValidationExceptionToResponse() — Method in class Handler

Create a response object from the given validation exception.

Handler::convertExceptionToResponse() — Method in class Handler

Create a Symfony response for the given exception.

Handler::convertExceptionToArray() — Method in class Handler

Convert the given exception to an array.

$ ReportableHandler#callbackProperty in class ReportableHandler

The underlying callback.

$ FormRequest#containerProperty in class FormRequest

The container instance.

FormRequest::createDefaultValidator() — Method in class FormRequest

Create the default validator instance.

$ HtmlDumper#compiledViewPathProperty in class HtmlDumper

The compiled view path of the application.

MaintenanceModeBypassCookie::create() — Method in class MaintenanceModeBypassCookie

Create a new maintenance mode bypass cookie.

CheckForMaintenanceModeClass in namespace Illuminate\Foundation\Http\Middleware
ConvertEmptyStringsToNullClass in namespace Illuminate\Foundation\Http\Middleware
$ HandlePrecognitiveRequests#containerProperty in class HandlePrecognitiveRequests

The container instance.

TransformsRequest::clean() — Method in class TransformsRequest

Clean the request's data.

TransformsRequest::cleanParameterBag() — Method in class TransformsRequest

Clean the data in the parameter bag.

TransformsRequest::cleanArray() — Method in class TransformsRequest

Clean the data in the given array.

TransformsRequest::cleanValue() — Method in class TransformsRequest

Clean the given value.

MaintenanceModeManager::createFileDriver() — Method in class MaintenanceModeManager

Create an instance of the file based maintenance driver.

MaintenanceModeManager::createCacheDriver() — Method in class MaintenanceModeManager

Create an instance of the cache based maintenance driver.

PackageManifest::config() — Method in class PackageManifest

Get all of the values for all packages for the given configuration name.

ProviderRepository::compileManifest() — Method in class ProviderRepository

Compile the application service manifest file.

ProviderRepository::createProvider() — Method in class ProviderRepository

Create a new provider instance.

$ ArtisanServiceProvider#commandsProperty in class ArtisanServiceProvider

The commands to be registered.

ComposerServiceProviderClass in namespace Illuminate\Foundation\Providers
ConsoleSupportServiceProviderClass in namespace Illuminate\Foundation\Providers
InteractsWithDatabase::castAsJson() — Method in class InteractsWithDatabase

Cast a JSON string to a database compatible type.

InteractsWithViews::component() — Method in class InteractsWithViews

Render the given view component.

DatabaseTransactions::connectionsToTransact() — Method in class DatabaseTransactions

The database connections that should have transactions.

DatabaseTruncation::connectionsToTruncate() — Method in class DatabaseTruncation

The database connections that should have their tables truncated.

RefreshDatabase::connectionsToTransact() — Method in class RefreshDatabase

The database connections that should have transactions.

$ TestCase#callbackExceptionProperty in class TestCase

The exception thrown while running an application destruction callback.

TestCase::createApplication() — Method in class TestCase

Creates the application.

TestCase::callBeforeApplicationDestroyedCallbacks() — Method in class TestCase

Execute the application's pre-destruction callbacks.

CanConfigureMigrationCommandsClass in namespace Illuminate\Foundation\Testing\Traits
Vite::cspNonce() — Method in class Vite

Get the Content Security Policy nonce applied to all generated tags.

Vite::chunk() — Method in class Vite

Get the chunk for the given entry point / asset.

AbstractHasher::check() — Method in class AbstractHasher

Check the given plain value against a hash.

Argon2IdHasher::check() — Method in class Argon2IdHasher

Check the given plain value against a hash.

ArgonHasher::check() — Method in class ArgonHasher

Check the given plain value against a hash.

BcryptHasher::check() — Method in class BcryptHasher

Check the given plain value against a hash.

BcryptHasher::cost() — Method in class BcryptHasher

Extract the cost value from the options array.

HashManager::createBcryptDriver() — Method in class HashManager

Create an instance of the Bcrypt hash Driver.

HashManager::createArgonDriver() — Method in class HashManager

Create an instance of the Argon2i hash Driver.

HashManager::createArgon2idDriver() — Method in class HashManager

Create an instance of the Argon2id hash Driver.

HashManager::check() — Method in class HashManager

Check the given plain value against a hash.

DeterminesStatusCode::created() — Method in class DeterminesStatusCode

Determine if the response code was 201 "Created" response.

DeterminesStatusCode::conflict() — Method in class DeterminesStatusCode

Determine if the response was a 409 "Conflict" response.

ConnectionExceptionClass in namespace Illuminate\Http\Client
ConnectionFailedClass in namespace Illuminate\Http\Client\Events
$ PendingRequest#clientProperty in class PendingRequest

The Guzzle client instance.

$ PendingRequest#cookiesProperty in class PendingRequest

The request cookies.

PendingRequest::contentType() — Method in class PendingRequest

Specify the request's content type.

PendingRequest::connectTimeout() — Method in class PendingRequest

Specify the connect timeout (in seconds) for the request.

PendingRequest::createClient() — Method in class PendingRequest

Create new Guzzle client.

$ Response#cookiesProperty in class Response

The request cookies.

Response::collect() — Method in class Response

Get the JSON decoded body of the response as a collection.

Response::clientError() — Method in class Response

Determine if the response indicates a client error occurred.

Response::cookies() — Method in class Response

Get the response cookies.

Response::close() — Method in class Response

Close the stream and any underlying resources.

CanBePrecognitiveClass in namespace Illuminate\Http\Concerns
InteractsWithInput::collect() — Method in class InteractsWithInput

Retrieve input from the request as a collection.

InteractsWithInput::cookie() — Method in class InteractsWithInput

Retrieve a cookie from the request.

InteractsWithInput::convertUploadedFiles() — Method in class InteractsWithInput

Convert the given array of Symfony UploadedFiles to custom Laravel UploadedFiles.

CheckResponseForModificationsClass in namespace Illuminate\Http\Middleware
$ HandleCors#containerProperty in class HandleCors

The container instance.

$ HandleCors#corsProperty in class HandleCors

The CORS service instance.

$ Request#convertedFilesProperty in class Request

All of the converted files for the request.

Request::capture() — Method in class Request

Create a new Illuminate HTTP request from server variables.

Request::createFrom() — Method in class Request

Create a new request instance from the given Laravel request.

Request::createFromBase() — Method in class Request

Create an Illuminate request from a Symfony instance.

CollectsResourcesClass in namespace Illuminate\Http\Resources
CollectsResources::collectResource() — Method in class CollectsResources

Map the given collection resource into its individual resources.

CollectsResources::collects() — Method in class CollectsResources

Get the resource that this resource collects.

ConditionallyLoadsAttributesClass in namespace Illuminate\Http\Resources
$ AnonymousResourceCollection#collectsProperty in class AnonymousResourceCollection

The name of the resource being collected.

JsonResource::collection() — Method in class JsonResource

Create a new anonymous resource collection.

$ ResourceCollection#collectsProperty in class ResourceCollection

The resource that this resource collects.

$ ResourceCollection#collectionProperty in class ResourceCollection

The mapped collection instance.

ResourceCollection::count() — Method in class ResourceCollection

Return the count of items in the resource collection.

ResourceResponse::calculateStatus() — Method in class ResourceResponse

Calculate the appropriate status code for the response.

ResponseTrait::content() — Method in class ResponseTrait

Get the content of the response.

ResponseTrait::cookie() — Method in class ResponseTrait

Add a cookie to the response.

File::create() — Method in class File

Create a new fake file.

File::createWithContent() — Method in class File

Create a new fake file with content.

FileFactory::create() — Method in class FileFactory

Create a new fake file.

FileFactory::createWithContent() — Method in class FileFactory

Create a new fake file with content.

UploadedFile::clientExtension() — Method in class UploadedFile

Get the file's extension supplied by the client.

UploadedFile::createFromBase() — Method in class UploadedFile

Create a new file instance from a base instance.

$ MessageLogged#contextProperty in class MessageLogged

The log context.

$ LogManager#channelsProperty in class LogManager

The array of resolved channels.

$ LogManager#customCreatorsProperty in class LogManager

The registered custom driver creators.

LogManager::channel() — Method in class LogManager

Get a log channel instance.

LogManager::createEmergencyLogger() — Method in class LogManager

Create an emergency log handler to avoid white screens of death.

LogManager::callCustomCreator() — Method in class LogManager

Call a custom driver creator.

LogManager::createCustomDriver() — Method in class LogManager

Create a custom log driver instance.

LogManager::createStackDriver() — Method in class LogManager

Create an aggregate log driver instance.

LogManager::createSingleDriver() — Method in class LogManager

Create an instance of the single file log driver.

LogManager::createDailyDriver() — Method in class LogManager

Create an instance of the daily file log driver.

LogManager::createSlackDriver() — Method in class LogManager

Create an instance of the Slack log driver.

LogManager::createSyslogDriver() — Method in class LogManager

Create an instance of the syslog log driver.

LogManager::createErrorlogDriver() — Method in class LogManager

Create an instance of the "error log" log driver.

LogManager::createMonologDriver() — Method in class LogManager

Create an instance of any handler available in Monolog.

LogManager::configurationFor() — Method in class LogManager

Get the log connection configuration.

LogManager::critical() — Method in class LogManager

Critical conditions.

$ Logger#contextProperty in class Logger

Any context to be added to logs.

Logger::critical() — Method in class Logger

Log a critical message to the logs.

$ MailManager#customCreatorsProperty in class MailManager

The registered custom driver creators.

MailManager::createSymfonyTransport() — Method in class MailManager

Create a new transport instance.

MailManager::createSmtpTransport() — Method in class MailManager

Create an instance of the Symfony SMTP Transport driver.

MailManager::configureSmtpTransport() — Method in class MailManager

Configure the additional SMTP driver options.

MailManager::createSendmailTransport() — Method in class MailManager

Create an instance of the Symfony Sendmail Transport driver.

MailManager::createSesTransport() — Method in class MailManager

Create an instance of the Symfony Amazon SES Transport driver.

MailManager::createSesV2Transport() — Method in class MailManager

Create an instance of the Symfony Amazon SES V2 Transport driver.

MailManager::createMailTransport() — Method in class MailManager

Create an instance of the Symfony Mail Transport driver.

MailManager::createMailgunTransport() — Method in class MailManager

Create an instance of the Symfony Mailgun Transport driver.

MailManager::createPostmarkTransport() — Method in class MailManager

Create an instance of the Symfony Postmark Transport driver.

MailManager::createFailoverTransport() — Method in class MailManager

Create an instance of the Symfony Failover Transport driver.

MailManager::createLogTransport() — Method in class MailManager

Create an instance of the Log Transport driver.

MailManager::createArrayTransport() — Method in class MailManager

Create an instance of the Array Transport Driver.

$ Mailable#ccProperty in class Mailable

The "cc" recipients of the message.

$ Mailable#callbacksProperty in class Mailable

The callbacks for the message.

Mailable::cc() — Method in class Mailable

Set the recipients of the message.

ContentClass in namespace Illuminate\Mail\Mailables
$ Envelope#ccProperty in class Envelope

The recipients receiving a copy of the message.

Envelope::cc() — Method in class Envelope

Add a "cc" recipient to the message envelope.

Mailer::cc() — Method in class Mailer

Begin the process of mailing a mailable class instance.

Mailer::createMessage() — Method in class Mailer

Create a new message instance.

$ Markdown#componentPathsProperty in class Markdown

The registered component paths.

Markdown::componentPaths() — Method in class Markdown

Get the component paths.

Message::cc() — Method in class Message

Add a carbon copy to the message.

$ PendingMail#ccProperty in class PendingMail

The "cc" recipients of the message.

PendingMail::cc() — Method in class PendingMail

Set the recipients of the message.

ChannelManagerClass in namespace Illuminate\Notifications
ChannelManager::channel() — Method in class ChannelManager

Get a channel instance.

ChannelManager::createDatabaseDriver() — Method in class ChannelManager

Create an instance of the database driver.

ChannelManager::createBroadcastDriver() — Method in class ChannelManager

Create an instance of the broadcast driver.

ChannelManager::createMailDriver() — Method in class ChannelManager

Create an instance of the mail driver.

ChannelManager::createDriver() — Method in class ChannelManager

Create a new driver instance.

$ NotificationTableCommand#composerProperty in class NotificationTableCommand
NotificationTableCommand::createBaseMigration() — Method in class NotificationTableCommand

Create a base migration file for the notifications.

$ DatabaseNotification#castsProperty in class DatabaseNotification

The attributes that should be cast to native types.

BroadcastNotificationCreated::channelName() — Method in class BroadcastNotificationCreated

Get the broadcast channel name for the event.

$ NotificationFailed#channelProperty in class NotificationFailed

The channel name.

$ NotificationSending#channelProperty in class NotificationSending

The channel name.

$ NotificationSent#channelProperty in class NotificationSent

The channel name.

$ MailMessage#ccProperty in class MailMessage

The "cc" information for the message.

$ MailMessage#callbacksProperty in class MailMessage

The callbacks for the message.

MailMessage::cc() — Method in class MailMessage

Set the cc address for the mail message.

$ SendQueuedNotifications#channelsProperty in class SendQueuedNotifications

All of the channels to send the notification to.

$ AbstractCursorPaginator#cursorNameProperty in class AbstractCursorPaginator

The cursor string variable used to store the page.

$ AbstractCursorPaginator#cursorProperty in class AbstractCursorPaginator

The current cursor.

$ AbstractCursorPaginator#currentCursorResolverProperty in class AbstractCursorPaginator

The current cursor resolver callback.

AbstractCursorPaginator::cursor() — Method in class AbstractCursorPaginator

Get the current cursor being paginated.

AbstractCursorPaginator::currentCursorResolver() — Method in class AbstractCursorPaginator

Set the current cursor resolver callback.

AbstractCursorPaginator::count() — Method in class AbstractCursorPaginator

Get the number of items for the current page.

$ AbstractPaginator#currentPageProperty in class AbstractPaginator

The current page being "viewed".

$ AbstractPaginator#currentPathResolverProperty in class AbstractPaginator

The current path resolver callback.

$ AbstractPaginator#currentPageResolverProperty in class AbstractPaginator

The current page resolver callback.

AbstractPaginator::currentPage() — Method in class AbstractPaginator

Get the current page.

AbstractPaginator::currentPathResolver() — Method in class AbstractPaginator

Set the current request path resolver callback.

AbstractPaginator::currentPageResolver() — Method in class AbstractPaginator

Set the current page resolver callback.

AbstractPaginator::count() — Method in class AbstractPaginator

Get the number of items for the current page.

CursorClass in namespace Illuminate\Pagination
CursorPaginatorClass in namespace Illuminate\Pagination
UrlWindow::currentPage() — Method in class UrlWindow

Get the current page from the paginator.

$ Hub#containerProperty in class Hub

The container implementation.

$ Pipeline#containerProperty in class Pipeline

The container implementation.

Pipeline::carry() — Method in class Pipeline

Get a Closure that represents a slice of the application onion.

Factory::concurrently() — Method in class Factory

Run a pool of processes and wait for them to finish executing.

$ FakeInvokedProcess#commandProperty in class FakeInvokedProcess

The command being faked.

$ FakeProcessResult#commandProperty in class FakeProcessResult

The command string.

FakeProcessResult::command() — Method in class FakeProcessResult

Get the original command executed by the process.

InvokedProcessPool::count() — Method in class InvokedProcessPool

Get the total number of processes.

$ PendingProcess#commandProperty in class PendingProcess

The command to invoke the process.

PendingProcess::command() — Method in class PendingProcess

Specify the command that will invoke the process.

$ Pool#callbackProperty in class Pool

The callback that resolves the pending processes.

ProcessPoolResults::collect() — Method in class ProcessPoolResults

Get the results as a collection.

ProcessResult::command() — Method in class ProcessResult

Get the original command executed by the process.

CallQueuedClosureClass in namespace Illuminate\Queue
$ CallQueuedClosure#closureProperty in class CallQueuedClosure

The serializable Closure instance.

CallQueuedClosure::create() — Method in class CallQueuedClosure

Create a new job instance.

CallQueuedHandlerClass in namespace Illuminate\Queue
$ CallQueuedHandler#containerProperty in class CallQueuedHandler

The container instance.

CallQueuedHandler::call() — Method in class CallQueuedHandler

Handle the queued job.

Manager::connection() — Method in class Manager

Get a connection instance from the global manager.

BeanstalkdConnector::connect() — Method in class BeanstalkdConnector

Establish a queue connection.

ConnectorInterfaceClass in namespace Illuminate\Queue\Connectors
ConnectorInterface::connect() — Method in class ConnectorInterface

Establish a queue connection.

$ DatabaseConnector#connectionsProperty in class DatabaseConnector

Database connections.

DatabaseConnector::connect() — Method in class DatabaseConnector

Establish a queue connection.

NullConnector::connect() — Method in class NullConnector

Establish a queue connection.

$ RedisConnector#connectionProperty in class RedisConnector

The connection name.

RedisConnector::connect() — Method in class RedisConnector

Establish a queue connection.

SqsConnector::connect() — Method in class SqsConnector

Establish a queue connection.

SyncConnector::connect() — Method in class SyncConnector

Establish a queue connection.

$ BatchesTableCommand#composerProperty in class BatchesTableCommand
BatchesTableCommand::createBaseMigration() — Method in class BatchesTableCommand

Create a base migration file for the table.

ClearCommandClass in namespace Illuminate\Queue\Console
$ FailedTableCommand#composerProperty in class FailedTableCommand
FailedTableCommand::createBaseMigration() — Method in class FailedTableCommand

Create a base migration file for the table.

$ RestartCommand#cacheProperty in class RestartCommand

The cache store implementation.

$ TableCommand#composerProperty in class TableCommand
TableCommand::createBaseMigration() — Method in class TableCommand

Create a base migration file for the table.

$ WorkCommand#cacheProperty in class WorkCommand

The cache store implementation.

DatabaseQueue::clear() — Method in class DatabaseQueue

Delete all of the jobs from the queue.

$ JobExceptionOccurred#connectionNameProperty in class JobExceptionOccurred

The connection name.

$ JobFailed#connectionNameProperty in class JobFailed

The connection name.

$ JobPopped#connectionNameProperty in class JobPopped

The connection name.

$ JobPopping#connectionNameProperty in class JobPopping

The connection name.

$ JobProcessed#connectionNameProperty in class JobProcessed

The connection name.

$ JobProcessing#connectionNameProperty in class JobProcessing

The connection name.

$ JobQueued#connectionNameProperty in class JobQueued

The connection name.

$ JobReleasedAfterException#connectionNameProperty in class JobReleasedAfterException

The connection name.

$ Looping#connectionNameProperty in class Looping

The connection name.

$ QueueBusy#connectionProperty in class QueueBusy

The connection name.

$ Job#containerProperty in class Job

The IoC container instance.

$ Job#connectionNameProperty in class Job

The name of the connection the job belongs to.

$ Listener#commandPathProperty in class Listener

The command working path.

Listener::createCommand() — Method in class Listener

Create the command with the listener options.

LuaScripts::clear() — Method in class LuaScripts

Get the Lua script for removing all jobs from the queue.

$ Queue#containerProperty in class Queue

The IoC container instance.

$ Queue#connectionNameProperty in class Queue

The connection name for the queue.

$ Queue#createPayloadCallbacksProperty in class Queue

The create payload callbacks.

Queue::createPayload() — Method in class Queue

Create a payload string from the given job and data.

Queue::createPayloadArray() — Method in class Queue

Create a payload array from the given job and data.

Queue::createObjectPayload() — Method in class Queue

Create a payload for an object-based queue handler.

Queue::createStringPayload() — Method in class Queue

Create a typical, string based queue payload array.

Queue::createPayloadUsing() — Method in class Queue

Register a callback to be executed when creating job payloads.

$ QueueManager#connectionsProperty in class QueueManager

The array of resolved queue connections.

$ QueueManager#connectorsProperty in class QueueManager

The array of resolved queue connectors.

QueueManager::connected() — Method in class QueueManager

Determine if the driver is connected.

QueueManager::connection() — Method in class QueueManager

Resolve a queue connection instance.

QueueServiceProvider::configureSerializableClosureUses() — Method in class QueueServiceProvider

Configure serializable closures uses.

$ RedisQueue#connectionProperty in class RedisQueue

The connection name.

RedisQueue::createPayloadArray() — Method in class RedisQueue

Create a payload string from the given job and data.

RedisQueue::clear() — Method in class RedisQueue

Delete all of the jobs from the queue.

SqsQueue::clear() — Method in class SqsQueue

Delete all of the jobs from the queue.

$ Worker#cacheProperty in class Worker

The cache repository implementation.

Worker::calculateBackoff() — Method in class Worker

Calculate the backoff for the given job.

ConnectionClass in namespace Illuminate\Redis\Connections
$ Connection#clientProperty in class Connection

The Redis client.

Connection::createSubscription() — Method in class Connection

Subscribe to a set of given channels for messages.

Connection::client() — Method in class Connection

Get the underlying Redis client.

Connection::command() — Method in class Connection

Run a command against the Redis database.

PacksPhpRedisValues::compressed() — Method in class PacksPhpRedisValues

Determine if compression is enabled.

$ PhpRedisConnection#connectorProperty in class PhpRedisConnection

The connection creation callback.

$ PhpRedisConnection#configProperty in class PhpRedisConnection

The connection configuration array.

PhpRedisConnection::createSubscription() — Method in class PhpRedisConnection

Subscribe to a set of given channels for messages.

PhpRedisConnection::command() — Method in class PhpRedisConnection

Run a command against the Redis database.

$ PredisConnection#clientProperty in class PredisConnection

The Predis client.

PredisConnection::createSubscription() — Method in class PredisConnection

Subscribe to a set of given channels for messages.

PhpRedisConnector::connect() — Method in class PhpRedisConnector

Create a new clustered PhpRedis connection.

PhpRedisConnector::connectToCluster() — Method in class PhpRedisConnector

Create a new clustered PhpRedis connection.

PhpRedisConnector::createClient() — Method in class PhpRedisConnector

Create the Redis client instance.

PhpRedisConnector::createRedisClusterInstance() — Method in class PhpRedisConnector

Create a new redis cluster instance.

PredisConnector::connect() — Method in class PredisConnector

Create a new clustered Predis connection.

PredisConnector::connectToCluster() — Method in class PredisConnector

Create a new clustered Predis connection.

CommandExecutedClass in namespace Illuminate\Redis\Events
$ CommandExecuted#commandProperty in class CommandExecuted

The Redis command that was executed.

$ CommandExecuted#connectionProperty in class CommandExecuted

The Redis connection instance.

$ CommandExecuted#connectionNameProperty in class CommandExecuted

The Redis connection name.

ConcurrencyLimiterClass in namespace Illuminate\Redis\Limiters
ConcurrencyLimiterBuilderClass in namespace Illuminate\Redis\Limiters
$ ConcurrencyLimiterBuilder#connectionProperty in class ConcurrencyLimiterBuilder

The Redis connection.

DurationLimiter::clear() — Method in class DurationLimiter

Clear the limiter.

$ DurationLimiterBuilder#connectionProperty in class DurationLimiterBuilder

The Redis connection.

$ RedisManager#customCreatorsProperty in class RedisManager

The registered custom driver creators.

$ RedisManager#configProperty in class RedisManager

The Redis server configurations.

$ RedisManager#connectionsProperty in class RedisManager

The Redis connections.

RedisManager::connection() — Method in class RedisManager

Get a Redis connection by name.

RedisManager::configure() — Method in class RedisManager

Configure the given connection to prepare it for commands.

RedisManager::connector() — Method in class RedisManager

Get the connector instance for the current driver.

RedisManager::connections() — Method in class RedisManager

Return all of the created connections.

AbstractRouteCollection::checkForAlternateVerbs() — Method in class AbstractRouteCollection

Determine if any routes match on another HTTP verb.

AbstractRouteCollection::compile() — Method in class AbstractRouteCollection

Compile the routes for caching.

AbstractRouteCollection::count() — Method in class AbstractRouteCollection

Count the number of items in the collection.

CallableDispatcherClass in namespace Illuminate\Routing
$ CallableDispatcher#containerProperty in class CallableDispatcher

The container instance.

CompiledRouteCollectionClass in namespace Illuminate\Routing
$ CompiledRouteCollection#compiledProperty in class CompiledRouteCollection

The compiled routes collection.

$ CompiledRouteCollection#containerProperty in class CompiledRouteCollection

The container instance used by the route.

ControllerMakeCommandClass in namespace Illuminate\Routing\Console
CallableDispatcherClass in namespace Illuminate\Routing\Contracts
ControllerDispatcherClass in namespace Illuminate\Routing\Contracts
ControllerClass in namespace Illuminate\Routing
Controller::callAction() — Method in class Controller

Execute an action on the controller.

ControllerDispatcherClass in namespace Illuminate\Routing
$ ControllerDispatcher#containerProperty in class ControllerDispatcher

The container instance.

ControllerMiddlewareOptionsClass in namespace Illuminate\Routing
CreatesRegularExpressionRouteConstraintsClass in namespace Illuminate\Routing
ThrottleRequests::calculateRemainingAttempts() — Method in class ThrottleRequests

Calculate the number of remaining attempts.

ThrottleRequestsWithRedis::calculateRemainingAttempts() — Method in class ThrottleRequestsWithRedis

Calculate the number of remaining attempts.

$ PendingResourceRegistration#controllerProperty in class PendingResourceRegistration

The resource controller.

$ PendingSingletonResourceRegistration#controllerProperty in class PendingSingletonResourceRegistration

The resource controller.

PendingSingletonResourceRegistration::creatable() — Method in class PendingSingletonResourceRegistration

Indicate that the resource should have creation and storage routes.

Redirector::createRedirect() — Method in class Redirector

Create a new redirect response.

$ Route#controllerProperty in class Route

The controller instance.

$ Route#computedMiddlewareProperty in class Route

The computed gathered middleware.

$ Route#compiledProperty in class Route

The compiled version of the route.

$ Route#containerProperty in class Route

The container instance used by the route.

Route::compileRoute() — Method in class Route

Compile the route into a Symfony CompiledRoute instance.

Route::compileParameterNames() — Method in class Route

Get the parameter names for the route.

Route::can() — Method in class Route

Specify that the "Authorize" / "can" middleware should be applied to the route with the given options.

Route::controllerMiddleware() — Method in class Route

Get the middleware for the route's controller.

Route::controllerDispatcher() — Method in class Route

Get the dispatcher for the route's controller.

RouteAction::containsSerializedClosure() — Method in class RouteAction

Determine if the given array actions contain a serialized Closure.

RouteBinding::createClassBinding() — Method in class RouteBinding

Create a class based binding using the IoC container.

RouteRegistrar::compileAction() — Method in class RouteRegistrar

Compile the action into an array including the attributes.

RouteRegistrar::controller() — Method in class RouteRegistrar
$ Router#containerProperty in class Router

The IoC container instance.

$ Router#currentProperty in class Router

The currently dispatched route instance.

$ Router#currentRequestProperty in class Router

The request currently being dispatched.

Router::createRoute() — Method in class Router

Create a new route instance.

Router::convertToControllerAction() — Method in class Router

Add a controller based route action to the action array.

Router::current() — Method in class Router

Get the currently dispatched route instance.

Router::currentRouteName() — Method in class Router

Get the current route name.

Router::currentRouteNamed() — Method in class Router

Determine if the current route matches a pattern.

Router::currentRouteAction() — Method in class Router

Get the current route action.

Router::currentRouteUses() — Method in class Router

Determine if the current route action matches a given action.

$ UrlGenerator#cachedRootProperty in class UrlGenerator

A cached copy of the URL root for the current request.

$ UrlGenerator#cachedSchemeProperty in class UrlGenerator

A cached copy of the URL scheme for the current request.

UrlGenerator::current() — Method in class UrlGenerator

Get the current URL for the request.

ViewController::callAction() — Method in class ViewController

Execute an action on the controller.

ArraySessionHandler::close() — Method in class ArraySessionHandler
{@inheritdoc}
ArraySessionHandler::calculateExpiration() — Method in class ArraySessionHandler

Get the expiration time of the session.

CacheBasedSessionHandlerClass in namespace Illuminate\Session
$ CacheBasedSessionHandler#cacheProperty in class CacheBasedSessionHandler

The cache repository instance.

CacheBasedSessionHandler::close() — Method in class CacheBasedSessionHandler
{@inheritdoc}
$ SessionTableCommand#composerProperty in class SessionTableCommand
SessionTableCommand::createBaseMigration() — Method in class SessionTableCommand

Create a base migration file for the session.

CookieSessionHandlerClass in namespace Illuminate\Session
$ CookieSessionHandler#cookieProperty in class CookieSessionHandler

The cookie jar instance.

CookieSessionHandler::close() — Method in class CookieSessionHandler
{@inheritdoc}
$ DatabaseSessionHandler#connectionProperty in class DatabaseSessionHandler

The database connection instance.

$ DatabaseSessionHandler#containerProperty in class DatabaseSessionHandler

The container instance.

DatabaseSessionHandler::close() — Method in class DatabaseSessionHandler
{@inheritdoc}
FileSessionHandler::close() — Method in class FileSessionHandler
{@inheritdoc}
$ StartSession#cacheFactoryResolverProperty in class StartSession

The callback that can resolve an instance of the cache factory.

StartSession::collectGarbage() — Method in class StartSession

Remove the garbage from the session if necessary.

StartSession::configHitsLottery() — Method in class StartSession

Determine if the configuration odds hit the lottery.

StartSession::cache() — Method in class StartSession

Resolve the given cache driver.

NullSessionHandler::close() — Method in class NullSessionHandler
{@inheritdoc}
SessionManager::callCustomCreator() — Method in class SessionManager

Call a custom driver creator.

SessionManager::createNullDriver() — Method in class SessionManager

Create an instance of the "null" session driver.

SessionManager::createArrayDriver() — Method in class SessionManager

Create an instance of the "array" session driver.

SessionManager::createCookieDriver() — Method in class SessionManager

Create an instance of the "cookie" session driver.

SessionManager::createFileDriver() — Method in class SessionManager

Create an instance of the file session driver.

SessionManager::createNativeDriver() — Method in class SessionManager

Create an instance of the file session driver.

SessionManager::createDatabaseDriver() — Method in class SessionManager

Create an instance of the database session driver.

SessionManager::createApcDriver() — Method in class SessionManager

Create an instance of the APC session driver.

SessionManager::createMemcachedDriver() — Method in class SessionManager

Create an instance of the Memcached session driver.

SessionManager::createRedisDriver() — Method in class SessionManager

Create an instance of the Redis session driver.

SessionManager::createDynamodbDriver() — Method in class SessionManager

Create an instance of the DynamoDB session driver.

SessionManager::createCacheBased() — Method in class SessionManager

Create an instance of a cache driven driver.

SessionManager::createCacheHandler() — Method in class SessionManager

Create the cache based session handler instance.

SymfonySessionDecorator::clear() — Method in class SymfonySessionDecorator
{@inheritdoc}
Arr::collapse() — Method in class Arr

Collapse an array of arrays into a single array.

Arr::crossJoin() — Method in class Arr

Cross join the given arrays, returning all possible permutations.

CarbonClass in namespace Illuminate\Support
CollectionClass in namespace Illuminate\Support
Collection::collapse() — Method in class Collection
Collection::contains() — Method in class Collection

Determine if an item exists in the collection.

Collection::containsStrict() — Method in class Collection

Determine if an item exists, using strict comparison.

Collection::crossJoin() — Method in class Collection
Collection::containsOneItem() — Method in class Collection

Determine if the collection contains a single item.

Collection::combine() — Method in class Collection
Collection::concat() — Method in class Collection

Push all of the given items onto the collection.

Collection::chunk() — Method in class Collection
Collection::chunkWhile() — Method in class Collection
Collection::count() — Method in class Collection

Count the number of items in the collection.

Collection::countBy() — Method in class Collection
ComposerClass in namespace Illuminate\Support
ConfigurationUrlParserClass in namespace Illuminate\Support
$ DateFactory#callableProperty in class DateFactory

This callable may be used to intercept date creation.

DateFactory::create() — Method in class DateFactory
DateFactory::createFromDate() — Method in class DateFactory
DateFactory::createFromFormat() — Method in class DateFactory
DateFactory::createFromTime() — Method in class DateFactory
DateFactory::createFromTimeString() — Method in class DateFactory
DateFactory::createFromTimestamp() — Method in class DateFactory
DateFactory::createFromTimestampMs() — Method in class DateFactory
DateFactory::createFromTimestampUTC() — Method in class DateFactory
DateFactory::createMidnightDate() — Method in class DateFactory
DateFactory::createSafe() — Method in class DateFactory
Enumerable::collapse() — Method in class Enumerable
Enumerable::containsStrict() — Method in class Enumerable

Determine if an item exists, using strict comparison.

Enumerable::contains() — Method in class Enumerable

Determine if an item exists in the enumerable.

Enumerable::crossJoin() — Method in class Enumerable
Enumerable::containsOneItem() — Method in class Enumerable

Determine if the collection contains a single item.

Enumerable::combine() — Method in class Enumerable
Enumerable::concat() — Method in class Enumerable

Push all of the given items onto the collection.

Enumerable::chunk() — Method in class Enumerable
Enumerable::chunkWhile() — Method in class Enumerable
Enumerable::count() — Method in class Enumerable

Count the number of items in the collection.

Enumerable::countBy() — Method in class Enumerable
Enumerable::collect() — Method in class Enumerable

Collect the values into a collection.

App::configPath() — Method in class App
App::configurationIsCached() — Method in class App
App::currentLocale() — Method in class App
App::callMethodBinding() — Method in class App
App::call() — Method in class App
Artisan::commandStartedAt() — Method in class Artisan
Artisan::command() — Method in class Artisan
Artisan::call() — Method in class Artisan
Auth::createSessionDriver() — Method in class Auth
Auth::createTokenDriver() — Method in class Auth
Auth::createUserProvider() — Method in class Auth
Auth::check() — Method in class Auth
Blade::compile() — Method in class Blade
Blade::compileString() — Method in class Blade
Blade::check() — Method in class Blade
Blade::component() — Method in class Blade
Blade::components() — Method in class Blade
Blade::componentNamespace() — Method in class Blade
Blade::compileClassComponentOpening() — Method in class Blade
Blade::compileEndComponentClass() — Method in class Blade
Blade::compileEndOnce() — Method in class Blade
Blade::compileEchos() — Method in class Blade
Broadcast::channelRoutes() — Method in class Broadcast
Broadcast::connection() — Method in class Broadcast
Broadcast::channel() — Method in class Broadcast
Bus::chain() — Method in class Bus
CacheClass in namespace Illuminate\Support\Facades
Cache::clear() — Method in class Cache
ConfigClass in namespace Illuminate\Support\Facades
CookieClass in namespace Illuminate\Support\Facades
CryptClass in namespace Illuminate\Support\Facades
DB::connection() — Method in class DB
DB::cursor() — Method in class DB
DB::commit() — Method in class DB
Date::create() — Method in class Date
Date::createFromDate() — Method in class Date
Date::createFromFormat() — Method in class Date
Date::createFromTime() — Method in class Date
Date::createFromTimeString() — Method in class Date
Date::createFromTimestamp() — Method in class Date
Date::createFromTimestampMs() — Method in class Date
Date::createFromTimestampUTC() — Method in class Date
Date::createMidnightDate() — Method in class Date
Date::createSafe() — Method in class Date
Event::createClassListener() — Method in class Event
$ Facade#cachedProperty in class Facade

Indicates if the resolved instance should be cached.

Facade::createFreshMockInstance() — Method in class Facade

Create a fresh mock instance for the given class.

Facade::createMock() — Method in class Facade

Create a fresh mock instance for the given class.

Facade::clearResolvedInstance() — Method in class Facade

Clear a resolved facade instance.

Facade::clearResolvedInstances() — Method in class Facade

Clear all of the resolved instances.

File::chmod() — Method in class File
File::copy() — Method in class File
File::copyDirectory() — Method in class File
File::cleanDirectory() — Method in class File
Gate::check() — Method in class Gate
Hash::createBcryptDriver() — Method in class Hash
Hash::createArgonDriver() — Method in class Hash
Hash::createArgon2idDriver() — Method in class Hash
Hash::check() — Method in class Hash
Http::contentType() — Method in class Http
Http::connectTimeout() — Method in class Http
Http::createClient() — Method in class Http
Lang::choice() — Method in class Lang
Log::channel() — Method in class Log
Log::critical() — Method in class Log
Mail::createSymfonyTransport() — Method in class Mail
Mail::cc() — Method in class Mail
Notification::channel() — Method in class Notification
ParallelTesting::callSetUpProcessCallbacks() — Method in class ParallelTesting
ParallelTesting::callSetUpTestCaseCallbacks() — Method in class ParallelTesting
ParallelTesting::callSetUpTestDatabaseCallbacks() — Method in class ParallelTesting
ParallelTesting::callTearDownProcessCallbacks() — Method in class ParallelTesting
ParallelTesting::callTearDownTestCaseCallbacks() — Method in class ParallelTesting
Password::createToken() — Method in class Password
$ Pipeline#cachedProperty in class Pipeline

Indicates if the resolved instance should be cached.

Process::command() — Method in class Process
Process::concurrently() — Method in class Process
Queue::connected() — Method in class Queue
Queue::connection() — Method in class Queue
Queue::createPayloadUsing() — Method in class Queue
RateLimiter::clear() — Method in class RateLimiter
RateLimiter::cleanRateLimiterKey() — Method in class RateLimiter
Redis::connection() — Method in class Redis
Redis::connections() — Method in class Redis
Redis::createSubscription() — Method in class Redis
Redis::client() — Method in class Redis
Redis::command() — Method in class Redis
Request::capture() — Method in class Request
Request::createFrom() — Method in class Request
Request::createFromBase() — Method in class Request
Request::createFromGlobals() — Method in class Request
Request::create() — Method in class Request
Request::collect() — Method in class Request
Request::cookie() — Method in class Request
Route::current() — Method in class Route
Route::currentRouteName() — Method in class Route
Route::currentRouteNamed() — Method in class Route
Route::currentRouteAction() — Method in class Route
Route::currentRouteUses() — Method in class Route
Route::controller() — Method in class Route
$ Schema#cachedProperty in class Schema

Indicates if the resolved facade should be cached.

Schema::connection() — Method in class Schema

Get a schema builder instance for a connection.

Schema::createDatabase() — Method in class Schema
Schema::create() — Method in class Schema
Storage::cloud() — Method in class Storage
Storage::createLocalDriver() — Method in class Storage
Storage::createFtpDriver() — Method in class Storage
Storage::createSftpDriver() — Method in class Storage
Storage::createS3Driver() — Method in class Storage
Storage::createScopedDriver() — Method in class Storage
Storage::copy() — Method in class Storage
Storage::checksum() — Method in class Storage
Storage::createDirectory() — Method in class Storage
URL::current() — Method in class URL
View::creator() — Method in class View
View::composers() — Method in class View
View::composer() — Method in class View
View::callComposer() — Method in class View
View::callCreator() — Method in class View
Vite::cspNonce() — Method in class Vite
$ HigherOrderCollectionProxy#collectionProperty in class HigherOrderCollectionProxy

The collection being operated on.

$ HigherOrderWhenProxy#conditionProperty in class HigherOrderWhenProxy

The condition for proxying.

HigherOrderWhenProxy::condition() — Method in class HigherOrderWhenProxy

Set the condition on the proxy.

InteractsWithTime::currentTime() — Method in class InteractsWithTime

Get the current system time as a UNIX timestamp.

Js::convertDataToJavaScriptExpression() — Method in class Js

Convert the given data to a JavaScript expression.

Js::convertJsonToJavaScriptExpression() — Method in class Js

Convert the given JSON to a JavaScript expression.

LazyCollection::collapse() — Method in class LazyCollection
LazyCollection::contains() — Method in class LazyCollection

Determine if an item exists in the enumerable.

LazyCollection::containsStrict() — Method in class LazyCollection

Determine if an item exists, using strict comparison.

LazyCollection::crossJoin() — Method in class LazyCollection
LazyCollection::countBy() — Method in class LazyCollection
LazyCollection::containsOneItem() — Method in class LazyCollection

Determine if the collection contains a single item.

LazyCollection::combine() — Method in class LazyCollection
LazyCollection::concat() — Method in class LazyCollection

Push all of the given items onto the collection.

LazyCollection::chunk() — Method in class LazyCollection
LazyCollection::chunkWhile() — Method in class LazyCollection
LazyCollection::count() — Method in class LazyCollection

Count the number of items in the collection.

$ Lottery#chancesProperty in class Lottery

The number of expected wins.

Lottery::choose() — Method in class Lottery

Run the lottery.

$ Manager#containerProperty in class Manager

The container instance.

$ Manager#configProperty in class Manager

The configuration repository instance.

$ Manager#customCreatorsProperty in class Manager

The registered custom driver creators.

Manager::createDriver() — Method in class Manager

Create a new driver instance.

Manager::callCustomCreator() — Method in class Manager

Call a custom driver creator.

MessageBag::checkFormat() — Method in class MessageBag

Get the appropriate format based on the given format.

MessageBag::count() — Method in class MessageBag

Get the number of messages in the message bag.

$ MultipleInstanceManager#customCreatorsProperty in class MultipleInstanceManager

The registered custom instance creators.

MultipleInstanceManager::callCustomCreator() — Method in class MultipleInstanceManager

Call a custom instance creator.

$ MultipleItemsFoundException#countProperty in class MultipleItemsFoundException

The number of items found.

ServiceProvider::callBootingCallbacks() — Method in class ServiceProvider

Call the registered booting callbacks.

ServiceProvider::callBootedCallbacks() — Method in class ServiceProvider

Call the registered booted callbacks.

ServiceProvider::callAfterResolving() — Method in class ServiceProvider

Setup an after resolving listener, or fire immediately if already resolved.

ServiceProvider::commands() — Method in class ServiceProvider

Register the package's custom Artisan commands.

$ Str#camelCacheProperty in class Str

The cache of camel-cased words.

Str::camel() — Method in class Str

Convert a value to camel case.

Str::charAt() — Method in class Str

Get the character at the specified index.

Str::contains() — Method in class Str

Determine if a given string contains a given substring.

Str::containsAll() — Method in class Str

Determine if a given string contains all array values.

Str::createRandomStringsUsing() — Method in class Str

Set the callable that will be used to generate random strings.

Str::createRandomStringsUsingSequence() — Method in class Str

Set the sequence that will be used to generate random strings.

Str::createRandomStringsNormally() — Method in class Str

Indicate that random strings should be created normally and not using a custom factory.

Str::createUuidsUsing() — Method in class Str

Set the callable that will be used to generate UUIDs.

Str::createUuidsUsingSequence() — Method in class Str

Set the sequence that will be used to generate UUIDs.

Str::createUuidsNormally() — Method in class Str

Indicate that UUIDs should be created normally and not using a custom factory.

Stringable::charAt() — Method in class Stringable

Get the character at the specified index.

Stringable::classBasename() — Method in class Stringable

Get the basename of the class path.

Stringable::camel() — Method in class Stringable

Convert a value to camel case.

Stringable::contains() — Method in class Stringable

Determine if a given string contains a given substring.

Stringable::containsAll() — Method in class Stringable

Determine if a given string contains all array values.

BatchFake::cancel() — Method in class BatchFake

Cancel the batch.

BatchRepositoryFake::cancel() — Method in class BatchRepositoryFake

Cancel the batch that has the given ID.

$ BusFake#commandsProperty in class BusFake

The commands that have been dispatched.

$ BusFake#commandsSyncProperty in class BusFake

The commands that have been dispatched synchronously.

$ BusFake#commandsAfterResponseProperty in class BusFake

The commands that have been dispatched after the response has been sent.

BusFake::chain() — Method in class BusFake

Create a new chain of queueable jobs.

$ MailFake#currentMailerProperty in class MailFake

The mailer currently being used to send a message.

MailFake::cc() — Method in class MailFake

Begin the process of mailing a mailable class instance.

NotificationFake::channel() — Method in class NotificationFake

Get a channel instance by name.

QueueFake::connection() — Method in class QueueFake

Resolve a queue connection instance.

Timebox::call() — Method in class Timebox

Invoke the given callback within the specified timebox minimum.

CapsuleManagerTraitClass in namespace Illuminate\Support\Traits
$ CapsuleManagerTrait#containerProperty in class CapsuleManagerTrait

The container instance.

ConditionableClass in namespace Illuminate\Support\Traits
$ EnumeratesValues#containsProperty in class EnumeratesValues
EnumeratesValues::collect() — Method in class EnumeratesValues

Collect the values into a collection.

ReflectsClosures::closureParameterTypes() — Method in class ReflectsClosures

Get the class names / types of the parameters of the given Closure.

ValidatedInput::collect() — Method in class ValidatedInput

Get the input as a collection.

ViewErrorBag::count() — Method in class ViewErrorBag

Get the number of messages in the default bag.

AssertableJsonString::count() — Method in class AssertableJsonString

Get the total number of items in the underlying JSON array.

RunsInParallel::createApplication() — Method in class RunsInParallel

Creates the application.

CountInDatabaseClass in namespace Illuminate\Testing\Constraints
$ SeeInOrder#contentProperty in class SeeInOrder

The string under validation.

InvalidArgumentException::create() — Method in class InvalidArgumentException

Creates a new exception for an invalid argument.

Has::count() — Method in class Has

Assert that the prop is of the expected size.

$ ParallelTesting#containerProperty in class ParallelTesting

The container instance.

ParallelTesting::callSetUpProcessCallbacks() — Method in class ParallelTesting

Call all of the "setUp" process callbacks.

ParallelTesting::callSetUpTestCaseCallbacks() — Method in class ParallelTesting

Call all of the "setUp" test case callbacks.

ParallelTesting::callSetUpTestDatabaseCallbacks() — Method in class ParallelTesting

Call all of the "setUp" test database callbacks.

ParallelTesting::callTearDownProcessCallbacks() — Method in class ParallelTesting

Call all of the "tearDown" process callbacks.

ParallelTesting::callTearDownTestCaseCallbacks() — Method in class ParallelTesting

Call all of the "tearDown" test case callbacks.

$ PendingCommand#commandProperty in class PendingCommand

The command to run.

$ TestComponent#componentProperty in class TestComponent

The original component.

TestResponse::collect() — Method in class TestResponse

Get the JSON decoded body of the response as a collection.

MessageSelector::choose() — Method in class MessageSelector

Select a proper translation string based on the given number.

Translator::choice() — Method in class Translator

Get a translation according to an integer value.

ClosureValidationRuleClass in namespace Illuminate\Validation
$ ClosureValidationRule#callbackProperty in class ClosureValidationRule

The callback that validates the attribute.

FormatsMessages::callReplacer() — Method in class FormatsMessages

Call a custom validator message replacer.

FormatsMessages::callClassBasedReplacer() — Method in class FormatsMessages

Call a class based validator message replacer.

ValidatesAttributes::compareDates() — Method in class ValidatesAttributes

Compare a given date against another using an operator.

ValidatesAttributes::checkDateTimeOrder() — Method in class ValidatesAttributes

Given two date/time strings, check that one is after the other.

ValidatesAttributes::convertValuesToBoolean() — Method in class ValidatesAttributes

Convert the given values to boolean if they are string "true" / "false".

ValidatesAttributes::convertValuesToNull() — Method in class ValidatesAttributes

Convert the given values to null if they are string "null".

ValidatesAttributes::compare() — Method in class ValidatesAttributes

Determine if a comparison passes between the given values.

ConditionalRulesClass in namespace Illuminate\Validation
$ ConditionalRules#conditionProperty in class ConditionalRules

The boolean condition indicating if the rules should be added to the attribute.

$ DatabasePresenceVerifier#connectionProperty in class DatabasePresenceVerifier

The database connection to use.

$ Factory#containerProperty in class Factory

The IoC container instance.

$ NestedRules#callbackProperty in class NestedRules

The callback to execute.

NestedRules::compile() — Method in class NestedRules

Compile the callback into an array of rules.

$ DatabaseRule#columnProperty in class DatabaseRule

The column to check on.

$ Dimensions#constraintsProperty in class Dimensions

The constraints for the dimensions rule.

$ ExcludeIf#conditionProperty in class ExcludeIf

The condition that validates the attribute.

$ File#customRulesProperty in class File

An array of custom rules that will be merged into the validation rules.

$ Password#compromisedThresholdProperty in class Password

The number of times a password can appear in data leaks before being considered compromised.

$ Password#customRulesProperty in class Password

Additional validation rules that should be merged into the default rules during validation.

$ ProhibitedIf#conditionProperty in class ProhibitedIf

The condition that validates the attribute.

$ RequiredIf#conditionProperty in class RequiredIf

The condition that validates the attribute.

$ Validator#containerProperty in class Validator

The container instance.

$ Validator#currentRuleProperty in class Validator

The current rule that is validating.

$ Validator#customMessagesProperty in class Validator

The array of custom error messages.

$ Validator#customAttributesProperty in class Validator

The array of custom attribute names.

$ Validator#customValuesProperty in class Validator

The array of custom displayable values.

Validator::callExtension() — Method in class Validator

Call a custom validator extension.

Validator::callClassBasedExtension() — Method in class Validator

Call a class based validator extension.

$ BladeCompiler#customDirectivesProperty in class BladeCompiler

All custom "directive" handlers.

$ BladeCompiler#conditionsProperty in class BladeCompiler

All custom "condition" handlers.

$ BladeCompiler#compilersProperty in class BladeCompiler

All of the available compiler functions.

$ BladeCompiler#contentTagsProperty in class BladeCompiler

Array of opening and closing tags for regular echos.

$ BladeCompiler#classComponentAliasesProperty in class BladeCompiler

The array of class component aliases and their class names.

$ BladeCompiler#classComponentNamespacesProperty in class BladeCompiler

The array of class component namespaces to autoload from.

$ BladeCompiler#compilesComponentTagsProperty in class BladeCompiler

Indicates if component tags should be compiled.

BladeCompiler::compile() — Method in class BladeCompiler

Compile the view at the given path.

BladeCompiler::compileString() — Method in class BladeCompiler

Compile the given Blade template contents.

CompilerClass in namespace Illuminate\View\Compilers
$ Compiler#cachePathProperty in class Compiler

The cache path for the compiled views.

$ Compiler#compiledExtensionProperty in class Compiler

The compiled view file extension.

CompilerInterfaceClass in namespace Illuminate\View\Compilers
CompilerInterface::compile() — Method in class CompilerInterface

Compile the view at the given path.

ComponentTagCompilerClass in namespace Illuminate\View\Compilers
ComponentTagCompiler::compile() — Method in class ComponentTagCompiler

Compile the component and slot tags within the given string.

ComponentTagCompiler::compileTags() — Method in class ComponentTagCompiler

Compile the tags within the given string.

ComponentTagCompiler::compileOpeningTags() — Method in class ComponentTagCompiler

Compile the opening tags within the given string.

ComponentTagCompiler::compileSelfClosingTags() — Method in class ComponentTagCompiler

Compile the self-closing tags within the given string.

ComponentTagCompiler::componentString() — Method in class ComponentTagCompiler

Compile the Blade component string for the given component and attributes.

ComponentTagCompiler::componentClass() — Method in class ComponentTagCompiler

Get the component class for a given component alias.

ComponentTagCompiler::compileClosingTags() — Method in class ComponentTagCompiler

Compile the closing tags within the given string.

ComponentTagCompiler::compileSlots() — Method in class ComponentTagCompiler

Compile the slot tags within the given string.

ComponentTagCompiler::compileAttributeEchos() — Method in class ComponentTagCompiler

Compile any Blade echo statements that are present in the attribute string.

CompilesAuthorizationsClass in namespace Illuminate\View\Compilers\Concerns
CompilesAuthorizations::compileCan() — Method in class CompilesAuthorizations

Compile the can statements into valid PHP.

CompilesAuthorizations::compileCannot() — Method in class CompilesAuthorizations

Compile the cannot statements into valid PHP.

CompilesAuthorizations::compileCanany() — Method in class CompilesAuthorizations

Compile the canany statements into valid PHP.

CompilesAuthorizations::compileElsecan() — Method in class CompilesAuthorizations

Compile the else-can statements into valid PHP.

CompilesAuthorizations::compileElsecannot() — Method in class CompilesAuthorizations

Compile the else-cannot statements into valid PHP.

CompilesAuthorizations::compileElsecanany() — Method in class CompilesAuthorizations

Compile the else-canany statements into valid PHP.

CompilesAuthorizations::compileEndcan() — Method in class CompilesAuthorizations

Compile the end-can statements into valid PHP.

CompilesAuthorizations::compileEndcannot() — Method in class CompilesAuthorizations

Compile the end-cannot statements into valid PHP.

CompilesAuthorizations::compileEndcanany() — Method in class CompilesAuthorizations

Compile the end-canany statements into valid PHP.

CompilesClassesClass in namespace Illuminate\View\Compilers\Concerns
CompilesClasses::compileClass() — Method in class CompilesClasses

Compile the conditional class statement into valid PHP.

CompilesCommentsClass in namespace Illuminate\View\Compilers\Concerns
CompilesComments::compileComments() — Method in class CompilesComments

Compile Blade comments into an empty string.

CompilesComponentsClass in namespace Illuminate\View\Compilers\Concerns
$ CompilesComponents#componentHashStackProperty in class CompilesComponents

The component name hash stack.

CompilesComponents::compileComponent() — Method in class CompilesComponents

Compile the component statements into valid PHP.

CompilesComponents::compileClassComponentOpening() — Method in class CompilesComponents

Compile a class component opening.

CompilesComponents::compileEndComponent() — Method in class CompilesComponents

Compile the end-component statements into valid PHP.

CompilesComponents::compileEndComponentClass() — Method in class CompilesComponents

Compile the end-component statements into valid PHP.

CompilesComponents::compileSlot() — Method in class CompilesComponents

Compile the slot statements into valid PHP.

CompilesComponents::compileEndSlot() — Method in class CompilesComponents

Compile the end-slot statements into valid PHP.

CompilesComponents::compileComponentFirst() — Method in class CompilesComponents

Compile the component-first statements into valid PHP.

CompilesComponents::compileEndComponentFirst() — Method in class CompilesComponents

Compile the end-component-first statements into valid PHP.

CompilesComponents::compileProps() — Method in class CompilesComponents

Compile the prop statement into valid PHP.

CompilesComponents::compileAware() — Method in class CompilesComponents

Compile the aware statement into valid PHP.

CompilesConditionalsClass in namespace Illuminate\View\Compilers\Concerns
CompilesConditionals::compileAuth() — Method in class CompilesConditionals

Compile the if-auth statements into valid PHP.

CompilesConditionals::compileElseAuth() — Method in class CompilesConditionals

Compile the else-auth statements into valid PHP.

CompilesConditionals::compileEndAuth() — Method in class CompilesConditionals

Compile the end-auth statements into valid PHP.

CompilesConditionals::compileEnv() — Method in class CompilesConditionals

Compile the env statements into valid PHP.

CompilesConditionals::compileEndEnv() — Method in class CompilesConditionals

Compile the end-env statements into valid PHP.

CompilesConditionals::compileProduction() — Method in class CompilesConditionals

Compile the production statements into valid PHP.

CompilesConditionals::compileEndProduction() — Method in class CompilesConditionals

Compile the end-production statements into valid PHP.

CompilesConditionals::compileGuest() — Method in class CompilesConditionals

Compile the if-guest statements into valid PHP.

CompilesConditionals::compileElseGuest() — Method in class CompilesConditionals

Compile the else-guest statements into valid PHP.

CompilesConditionals::compileEndGuest() — Method in class CompilesConditionals

Compile the end-guest statements into valid PHP.

CompilesConditionals::compileHasSection() — Method in class CompilesConditionals

Compile the has-section statements into valid PHP.

CompilesConditionals::compileSectionMissing() — Method in class CompilesConditionals

Compile the section-missing statements into valid PHP.

CompilesConditionals::compileIf() — Method in class CompilesConditionals

Compile the if statements into valid PHP.

CompilesConditionals::compileUnless() — Method in class CompilesConditionals

Compile the unless statements into valid PHP.

CompilesConditionals::compileElseif() — Method in class CompilesConditionals

Compile the else-if statements into valid PHP.

CompilesConditionals::compileElse() — Method in class CompilesConditionals

Compile the else statements into valid PHP.

CompilesConditionals::compileEndif() — Method in class CompilesConditionals

Compile the end-if statements into valid PHP.

CompilesConditionals::compileEndunless() — Method in class CompilesConditionals

Compile the end-unless statements into valid PHP.

CompilesConditionals::compileIsset() — Method in class CompilesConditionals

Compile the if-isset statements into valid PHP.

CompilesConditionals::compileEndIsset() — Method in class CompilesConditionals

Compile the end-isset statements into valid PHP.

CompilesConditionals::compileSwitch() — Method in class CompilesConditionals

Compile the switch statements into valid PHP.

CompilesConditionals::compileCase() — Method in class CompilesConditionals

Compile the case statements into valid PHP.

CompilesConditionals::compileDefault() — Method in class CompilesConditionals

Compile the default statements in switch case into valid PHP.

CompilesConditionals::compileEndSwitch() — Method in class CompilesConditionals

Compile the end switch statements into valid PHP.

CompilesConditionals::compileOnce() — Method in class CompilesConditionals

Compile a once block into valid PHP.

CompilesConditionals::compileEndOnce() — Method in class CompilesConditionals

Compile an end-once block into valid PHP.

CompilesConditionals::compileSelected() — Method in class CompilesConditionals

Compile a selected block into valid PHP.

CompilesConditionals::compileChecked() — Method in class CompilesConditionals

Compile a checked block into valid PHP.

CompilesConditionals::compileDisabled() — Method in class CompilesConditionals

Compile a disabled block into valid PHP.

CompilesConditionals::compileRequired() — Method in class CompilesConditionals

Compile a required block into valid PHP.

CompilesConditionals::compileReadonly() — Method in class CompilesConditionals

Compile a readonly block into valid PHP.

CompilesConditionals::compilePushIf() — Method in class CompilesConditionals

Compile the push statements into valid PHP.

CompilesConditionals::compileEndPushIf() — Method in class CompilesConditionals

Compile the end-push statements into valid PHP.

CompilesEchosClass in namespace Illuminate\View\Compilers\Concerns
CompilesEchos::compileEchos() — Method in class CompilesEchos

Compile Blade echos into valid PHP.

CompilesEchos::compileRawEchos() — Method in class CompilesEchos

Compile the "raw" echo statements.

CompilesEchos::compileRegularEchos() — Method in class CompilesEchos

Compile the "regular" echo statements.

CompilesEchos::compileEscapedEchos() — Method in class CompilesEchos

Compile the escaped echo statements.

CompilesErrorsClass in namespace Illuminate\View\Compilers\Concerns
CompilesErrors::compileError() — Method in class CompilesErrors

Compile the error statements into valid PHP.

CompilesErrors::compileEnderror() — Method in class CompilesErrors

Compile the enderror statements into valid PHP.

CompilesFragmentsClass in namespace Illuminate\View\Compilers\Concerns
CompilesFragments::compileFragment() — Method in class CompilesFragments

Compile the fragment statements into valid PHP.

CompilesFragments::compileEndfragment() — Method in class CompilesFragments

Compile the end-fragment statements into valid PHP.

CompilesHelpersClass in namespace Illuminate\View\Compilers\Concerns
CompilesHelpers::compileCsrf() — Method in class CompilesHelpers

Compile the CSRF statements into valid PHP.

CompilesHelpers::compileDd() — Method in class CompilesHelpers

Compile the "dd" statements into valid PHP.

CompilesHelpers::compileDump() — Method in class CompilesHelpers

Compile the "dump" statements into valid PHP.

CompilesHelpers::compileMethod() — Method in class CompilesHelpers

Compile the method statements into valid PHP.

CompilesHelpers::compileVite() — Method in class CompilesHelpers

Compile the "vite" statements into valid PHP.

CompilesHelpers::compileViteReactRefresh() — Method in class CompilesHelpers

Compile the "viteReactRefresh" statements into valid PHP.

CompilesIncludesClass in namespace Illuminate\View\Compilers\Concerns
CompilesIncludes::compileEach() — Method in class CompilesIncludes

Compile the each statements into valid PHP.

CompilesIncludes::compileInclude() — Method in class CompilesIncludes

Compile the include statements into valid PHP.

CompilesIncludes::compileIncludeIf() — Method in class CompilesIncludes

Compile the include-if statements into valid PHP.

CompilesIncludes::compileIncludeWhen() — Method in class CompilesIncludes

Compile the include-when statements into valid PHP.

CompilesIncludes::compileIncludeUnless() — Method in class CompilesIncludes

Compile the include-unless statements into valid PHP.

CompilesIncludes::compileIncludeFirst() — Method in class CompilesIncludes

Compile the include-first statements into valid PHP.

CompilesInjectionsClass in namespace Illuminate\View\Compilers\Concerns
CompilesInjections::compileInject() — Method in class CompilesInjections

Compile the inject statements into valid PHP.

CompilesJsClass in namespace Illuminate\View\Compilers\Concerns
CompilesJs::compileJs() — Method in class CompilesJs

Compile the "@js" directive into valid PHP.

CompilesJsonClass in namespace Illuminate\View\Compilers\Concerns
CompilesJson::compileJson() — Method in class CompilesJson

Compile the JSON statement into valid PHP.

CompilesLayoutsClass in namespace Illuminate\View\Compilers\Concerns
CompilesLayouts::compileExtends() — Method in class CompilesLayouts

Compile the extends statements into valid PHP.

CompilesLayouts::compileExtendsFirst() — Method in class CompilesLayouts

Compile the extends-first statements into valid PHP.

CompilesLayouts::compileSection() — Method in class CompilesLayouts

Compile the section statements into valid PHP.

CompilesLayouts::compileParent() — Method in class CompilesLayouts

Replace the @parent directive to a placeholder.

CompilesLayouts::compileYield() — Method in class CompilesLayouts

Compile the yield statements into valid PHP.

CompilesLayouts::compileShow() — Method in class CompilesLayouts

Compile the show statements into valid PHP.

CompilesLayouts::compileAppend() — Method in class CompilesLayouts

Compile the append statements into valid PHP.

CompilesLayouts::compileOverwrite() — Method in class CompilesLayouts

Compile the overwrite statements into valid PHP.

CompilesLayouts::compileStop() — Method in class CompilesLayouts

Compile the stop statements into valid PHP.

CompilesLayouts::compileEndsection() — Method in class CompilesLayouts

Compile the end-section statements into valid PHP.

CompilesLoopsClass in namespace Illuminate\View\Compilers\Concerns
CompilesLoops::compileForelse() — Method in class CompilesLoops

Compile the for-else statements into valid PHP.

CompilesLoops::compileEmpty() — Method in class CompilesLoops

Compile the for-else-empty and empty statements into valid PHP.

CompilesLoops::compileEndforelse() — Method in class CompilesLoops

Compile the end-for-else statements into valid PHP.

CompilesLoops::compileEndEmpty() — Method in class CompilesLoops

Compile the end-empty statements into valid PHP.

CompilesLoops::compileFor() — Method in class CompilesLoops

Compile the for statements into valid PHP.

CompilesLoops::compileForeach() — Method in class CompilesLoops

Compile the for-each statements into valid PHP.

CompilesLoops::compileBreak() — Method in class CompilesLoops

Compile the break statements into valid PHP.

CompilesLoops::compileContinue() — Method in class CompilesLoops

Compile the continue statements into valid PHP.

CompilesLoops::compileEndfor() — Method in class CompilesLoops

Compile the end-for statements into valid PHP.

CompilesLoops::compileEndforeach() — Method in class CompilesLoops

Compile the end-for-each statements into valid PHP.

CompilesLoops::compileWhile() — Method in class CompilesLoops

Compile the while statements into valid PHP.

CompilesLoops::compileEndwhile() — Method in class CompilesLoops

Compile the end-while statements into valid PHP.

CompilesRawPhpClass in namespace Illuminate\View\Compilers\Concerns
CompilesRawPhp::compilePhp() — Method in class CompilesRawPhp

Compile the raw PHP statements into valid PHP.

CompilesRawPhp::compileUnset() — Method in class CompilesRawPhp

Compile the unset statements into valid PHP.

CompilesStacksClass in namespace Illuminate\View\Compilers\Concerns
CompilesStacks::compileStack() — Method in class CompilesStacks

Compile the stack statements into the content.

CompilesStacks::compilePush() — Method in class CompilesStacks

Compile the push statements into valid PHP.

CompilesStacks::compilePushOnce() — Method in class CompilesStacks

Compile the push-once statements into valid PHP.

CompilesStacks::compileEndpush() — Method in class CompilesStacks

Compile the end-push statements into valid PHP.

CompilesStacks::compileEndpushOnce() — Method in class CompilesStacks

Compile the end-push-once statements into valid PHP.

CompilesStacks::compilePrepend() — Method in class CompilesStacks

Compile the prepend statements into valid PHP.

CompilesStacks::compilePrependOnce() — Method in class CompilesStacks

Compile the prepend-once statements into valid PHP.

CompilesStacks::compileEndprepend() — Method in class CompilesStacks

Compile the end-prepend statements into valid PHP.

CompilesStacks::compileEndprependOnce() — Method in class CompilesStacks

Compile the end-prepend-once statements into valid PHP.

CompilesStylesClass in namespace Illuminate\View\Compilers\Concerns
CompilesStyles::compileStyle() — Method in class CompilesStyles

Compile the conditional style statement into valid PHP.

CompilesTranslationsClass in namespace Illuminate\View\Compilers\Concerns
CompilesTranslations::compileLang() — Method in class CompilesTranslations

Compile the lang statements into valid PHP.

CompilesTranslations::compileEndlang() — Method in class CompilesTranslations

Compile the end-lang statements into valid PHP.

CompilesTranslations::compileChoice() — Method in class CompilesTranslations

Compile the choice statements into valid PHP.

ComponentClass in namespace Illuminate\View
$ Component#componentNameProperty in class Component

The component alias name.

$ Component#componentsResolverProperty in class Component

The component resolver callback.

$ Component#constructorParametersCacheProperty in class Component

The cache of constructor parameters, keyed by class.

Component::createBladeViewFromString() — Method in class Component

Create a Blade view with the raw component string content.

Component::createVariableFromMethod() — Method in class Component

Create a callable variable from the given method.

Component::createInvokableVariable() — Method in class Component

Create an invokable, toStringable variable for the given component method.

ComponentAttributeBagClass in namespace Illuminate\View
ComponentAttributeBag::class() — Method in class ComponentAttributeBag

Conditionally merge classes into the attribute bag.

ComponentSlotClass in namespace Illuminate\View
$ ComponentSlot#contentsProperty in class ComponentSlot

The slot contents.

$ ManagesComponents#componentStackProperty in class ManagesComponents

The components being rendered.

$ ManagesComponents#componentDataProperty in class ManagesComponents

The original data passed to the component.

$ ManagesComponents#currentComponentDataProperty in class ManagesComponents

The component data for the component that is currently being rendered.

ManagesComponents::componentData() — Method in class ManagesComponents

Get the data for the given component.

ManagesComponents::currentComponent() — Method in class ManagesComponents

Get the index for the current component.

ManagesEvents::creator() — Method in class ManagesEvents

Register a view creator event.

ManagesEvents::composers() — Method in class ManagesEvents

Register multiple view composers via an array.

ManagesEvents::composer() — Method in class ManagesEvents

Register a view composer event.

ManagesEvents::classEventMethodForPrefix() — Method in class ManagesEvents

Determine the class event method based on the given prefix.

ManagesEvents::callComposer() — Method in class ManagesEvents

Call the composer for a given view.

ManagesEvents::callCreator() — Method in class ManagesEvents

Call the creator for a given view.

$ DynamicComponent#componentProperty in class DynamicComponent

The name of the component.

$ DynamicComponent#compilerProperty in class DynamicComponent

The component tag compiler instance.

$ DynamicComponent#componentClassesProperty in class DynamicComponent

The cached component classes.

DynamicComponent::compileProps() — Method in class DynamicComponent

Compile the @props directive for the component.

DynamicComponent::compileBindings() — Method in class DynamicComponent

Compile the bindings for the component.

DynamicComponent::compileSlots() — Method in class DynamicComponent

Compile the slots for the component.

DynamicComponent::classForComponent() — Method in class DynamicComponent

Get the class for the current component.

DynamicComponent::compiler() — Method in class DynamicComponent

Get an instance of the Blade tag compiler.

CompilerEngineClass in namespace Illuminate\View\Engines
$ CompilerEngine#compilerProperty in class CompilerEngine

The Blade compiler instance.

$ CompilerEngine#compiledOrNotExpiredProperty in class CompilerEngine

The view paths that were compiled or are not expired, keyed by the path.

$ Factory#containerProperty in class Factory

The IoC container instance.

$ Factory#composersProperty in class Factory

The view composer events.

$ InvokableComponentVariable#callableProperty in class InvokableComponentVariable

The callable instance to resolve the variable value.

ViewServiceProvider::createFactory() — Method in class ViewServiceProvider

Create a new Factory Instance.

D

Gate::denyIf() — Method in class Gate

Perform an on-demand authorization check. Throw an authorization exception if the condition or callback is true.

Gate::define() — Method in class Gate

Define a new ability.

Gate::denies() — Method in class Gate

Determine if the given ability should be denied for the current user.

Gate::dispatchGateEvaluatedEvent() — Method in class Gate

Dispatch a gate evaluation event.

HandlesAuthorization::deny() — Method in class HandlesAuthorization

Throws an unauthorized exception.

HandlesAuthorization::denyWithStatus() — Method in class HandlesAuthorization

Deny with a HTTP status code.

HandlesAuthorization::denyAsNotFound() — Method in class HandlesAuthorization

Deny with a 404 HTTP status code.

Response::deny() — Method in class Response

Create a new "deny" Response.

Response::denyWithStatus() — Method in class Response

Create a new "deny" Response with a HTTP status code.

Response::denyAsNotFound() — Method in class Response

Create a new "deny" Response with a 404 HTTP status code.

Response::denied() — Method in class Response

Determine if the response was denied.

$ ClearResetsCommand#descriptionProperty in class ClearResetsCommand

The console command description.

DatabaseUserProviderClass in namespace Illuminate\Auth
DatabaseTokenRepositoryClass in namespace Illuminate\Auth\Passwords
DatabaseTokenRepository::deleteExisting() — Method in class DatabaseTokenRepository

Delete all existing reset tokens from the database.

DatabaseTokenRepository::delete() — Method in class DatabaseTokenRepository

Delete a token record by user.

DatabaseTokenRepository::deleteExpired() — Method in class DatabaseTokenRepository

Delete expired tokens.

PasswordBroker::deleteToken() — Method in class PasswordBroker

Delete password reset tokens of the given user.

TokenRepositoryInterface::delete() — Method in class TokenRepositoryInterface

Delete a token record.

TokenRepositoryInterface::deleteExpired() — Method in class TokenRepositoryInterface

Delete expired tokens.

BroadcastEvent::displayName() — Method in class BroadcastEvent

Get the display name for the queued job.

$ BroadcastManager#driversProperty in class BroadcastManager

The array of resolved broadcast drivers.

BroadcastManager::driver() — Method in class BroadcastManager

Get a driver instance.

PusherBroadcaster::decodePusherResponse() — Method in class PusherBroadcaster

Decode the given Pusher response.

InteractsWithSockets::dontBroadcastToCurrentUser() — Method in class InteractsWithSockets

Exclude the current user from receiving the broadcast.

Batch::decrementPendingJobs() — Method in class Batch

Decrement the pending jobs for the batch.

Batch::delete() — Method in class Batch

Delete the batch from storage.

BatchRepository::decrementPendingJobs() — Method in class BatchRepository

Decrement the total number of pending jobs for the batch.

BatchRepository::delete() — Method in class BatchRepository

Delete the batch that has the given ID.

DatabaseBatchRepositoryClass in namespace Illuminate\Bus
DatabaseBatchRepository::decrementPendingJobs() — Method in class DatabaseBatchRepository

Decrement the total number of pending jobs for the batch.

DatabaseBatchRepository::delete() — Method in class DatabaseBatchRepository

Delete the batch that has the given ID.

DispatcherClass in namespace Illuminate\Bus
Dispatcher::dispatch() — Method in class Dispatcher

Dispatch a command to its appropriate handler.

Dispatcher::dispatchSync() — Method in class Dispatcher

Dispatch a command to its appropriate handler in the current process.

Dispatcher::dispatchNow() — Method in class Dispatcher

Dispatch a command to its appropriate handler in the current process without using the synchronous queue.

Dispatcher::dispatchToQueue() — Method in class Dispatcher

Dispatch a command to its appropriate handler behind a queue.

Dispatcher::dispatchAfterResponse() — Method in class Dispatcher

Dispatch a command to its appropriate handler after the current process.

PendingBatch::dispatch() — Method in class PendingBatch

Dispatch the batch.

PendingBatch::dispatchAfterResponse() — Method in class PendingBatch

Dispatch the batch after the response is sent to the browser.

PendingBatch::dispatchExistingBatch() — Method in class PendingBatch

Dispatch an existing batch.

$ Queueable#delayProperty in class Queueable

The number of seconds before the job should be made available.

Queueable::delay() — Method in class Queueable

Set the desired delay in seconds for the job.

Queueable::dispatchNextJobInChain() — Method in class Queueable

Dispatch the next job on the chain.

ApcStore::decrement() — Method in class ApcStore

Decrement the value of an item in the cache.

ApcWrapper::decrement() — Method in class ApcWrapper

Decrement the value of an item in the cache.

ApcWrapper::delete() — Method in class ApcWrapper

Remove an item from the cache.

ArrayStore::decrement() — Method in class ArrayStore

Decrement the value of an item in the cache.

CacheManager::driver() — Method in class CacheManager

Get a cache driver instance.

$ CacheTableCommand#descriptionProperty in class CacheTableCommand

The console command description.

$ ClearCommand#descriptionProperty in class ClearCommand

The console command description.

$ ForgetCommand#descriptionProperty in class ForgetCommand

The console command description.

$ PruneStaleTagsCommand#descriptionProperty in class PruneStaleTagsCommand

The console command description.

DatabaseLockClass in namespace Illuminate\Cache
DatabaseStoreClass in namespace Illuminate\Cache
DatabaseStore::decrement() — Method in class DatabaseStore

Decrement the value of an item in the cache.

DynamoDbLockClass in namespace Illuminate\Cache
$ DynamoDbLock#dynamoProperty in class DynamoDbLock

The DynamoDB client instance.

DynamoDbStoreClass in namespace Illuminate\Cache
$ DynamoDbStore#dynamoProperty in class DynamoDbStore

The DynamoDB client instance.

DynamoDbStore::decrement() — Method in class DynamoDbStore

Decrement the value of an item in the cache.

$ FileStore#directoryProperty in class FileStore

The file cache directory.

FileStore::decrement() — Method in class FileStore

Decrement the value of an item in the cache.

MemcachedStore::decrement() — Method in class MemcachedStore

Decrement the value of an item in the cache.

NullStore::decrement() — Method in class NullStore

Decrement the value of an item in the cache.

$ Limit#decayMinutesProperty in class Limit

The number of minutes until the rate limit is reset.

RedisStore::decrement() — Method in class RedisStore

Decrement the value of an item in the cache.

RedisTaggedCache::decrement() — Method in class RedisTaggedCache

Decrement the value of an item in the cache.

$ Repository#defaultProperty in class Repository

The default number of seconds to store items.

Repository::decrement() — Method in class Repository

Decrement the value of an item in the cache.

Repository::delete() — Method in class Repository
{@inheritdoc}
Repository::deleteMultiple() — Method in class Repository
{@inheritdoc}
TaggedCache::decrement() — Method in class TaggedCache

Decrement the value of an item in the cache.

BufferedConsoleOutput::doWrite() — Method in class BufferedConsoleOutput
{@inheritdoc}
$ Command#descriptionProperty in class Command

The console command description.

PromptsForMissingInput::didReceiveOptions() — Method in class PromptsForMissingInput

Whether the input contains any options that differ from the default values.

$ Event#descriptionProperty in class Event

The human readable description of the event.

Event::description() — Method in class Event

Set the human-friendly description of the event.

ManagesFrequencies::daily() — Method in class ManagesFrequencies

Schedule the event to run daily.

ManagesFrequencies::dailyAt() — Method in class ManagesFrequencies

Schedule the event to run daily at a given time (10:00, 19:30, etc).

ManagesFrequencies::days() — Method in class ManagesFrequencies

Set the days of the week the command should run on.

$ Schedule#dispatcherProperty in class Schedule

The job dispatcher implementation.

Schedule::dispatchToQueue() — Method in class Schedule

Dispatch the given job to the queue.

Schedule::dispatchUniqueJobToQueue() — Method in class Schedule

Dispatch the given unique job to the queue.

Schedule::dispatchNow() — Method in class Schedule

Dispatch the given job right now.

Schedule::dueEvents() — Method in class Schedule

Get all of the events on the schedule that are due.

$ ScheduleClearCacheCommand#descriptionProperty in class ScheduleClearCacheCommand

The console command description.

$ ScheduleFinishCommand#descriptionProperty in class ScheduleFinishCommand

The console command description.

$ ScheduleListCommand#descriptionProperty in class ScheduleListCommand

The console command description.

$ ScheduleRunCommand#descriptionProperty in class ScheduleRunCommand

The console command description.

$ ScheduleRunCommand#dispatcherProperty in class ScheduleRunCommand

The event dispatcher.

$ ScheduleTestCommand#descriptionProperty in class ScheduleTestCommand

The console command description.

$ ScheduleWorkCommand#descriptionProperty in class ScheduleWorkCommand

The console command description.

Container::dropStaleInstances() — Method in class Container

Drop all of the stale instances and aliases.

Gate::define() — Method in class Gate

Define a new ability.

Gate::denies() — Method in class Gate

Determine if the given ability should be denied for the current user.

DispatcherClass in namespace Illuminate\Contracts\Bus
Dispatcher::dispatch() — Method in class Dispatcher

Dispatch a command to its appropriate handler.

Dispatcher::dispatchSync() — Method in class Dispatcher

Dispatch a command to its appropriate handler in the current process.

Dispatcher::dispatchNow() — Method in class Dispatcher

Dispatch a command to its appropriate handler in the current process.

QueueingDispatcher::dispatchToQueue() — Method in class QueueingDispatcher

Dispatch a command to its appropriate handler behind a queue.

Repository::decrement() — Method in class Repository

Decrement the value of an item in the cache.

Store::decrement() — Method in class Store

Decrement the value of an item in the cache.

DeviatesCastableAttributesClass in namespace Illuminate\Contracts\Database\Eloquent
DeviatesCastableAttributes::decrement() — Method in class DeviatesCastableAttributes

Decrement the attribute.

DecryptExceptionClass in namespace Illuminate\Contracts\Encryption
Encrypter::decrypt() — Method in class Encrypter

Decrypt the given value.

StringEncrypter::decryptString() — Method in class StringEncrypter

Decrypt the given string without unserialization.

DispatcherClass in namespace Illuminate\Contracts\Events
Dispatcher::dispatch() — Method in class Dispatcher

Dispatch an event and call the listeners.

Factory::disk() — Method in class Factory

Get a filesystem implementation.

Filesystem::delete() — Method in class Filesystem

Delete the file at a given path.

Filesystem::directories() — Method in class Filesystem

Get all of the directories within a given directory.

Filesystem::deleteDirectory() — Method in class Filesystem

Recursively delete a directory.

Application::databasePath() — Method in class Application

Get the path to the database directory.

MaintenanceMode::deactivate() — Method in class MaintenanceMode

Take the application out of maintenance.

MaintenanceMode::data() — Method in class MaintenanceMode

Get the data array which was provided when the application was placed into maintenance.

DispatcherClass in namespace Illuminate\Contracts\Notifications
Job::delete() — Method in class Job

Delete the job from the queue.

Registrar::delete() — Method in class Registrar

Register a new DELETE route with the router.

ResponseFactory::download() — Method in class ResponseFactory

Create a new file download response.

DeferrableProviderClass in namespace Illuminate\Contracts\Support
DeferringDisplayableValueClass in namespace Illuminate\Contracts\Support
DataAwareRuleClass in namespace Illuminate\Contracts\Validation
$ CookieJar#domainProperty in class CookieJar

The default domain (if specified).

EncryptCookies::disableFor() — Method in class EncryptCookies

Disable encryption for the given cookie name(s).

EncryptCookies::decrypt() — Method in class EncryptCookies

Decrypt the cookies on the request.

EncryptCookies::decryptCookie() — Method in class EncryptCookies

Decrypt the given cookie and return the value.

EncryptCookies::decryptArray() — Method in class EncryptCookies

Decrypt an array based cookie.

EncryptCookies::duplicate() — Method in class EncryptCookies

Duplicate a cookie with a new value.

$ Connection#databaseProperty in class Connection

The name of the connected database.

$ Connection#doctrineConnectionProperty in class Connection

The instance of Doctrine connection.

$ Connection#doctrineTypeMappingsProperty in class Connection

Type mappings that should be registered with new Doctrine connections.

Connection::delete() — Method in class Connection

Run a delete statement against the database.

Connection::disconnect() — Method in class Connection

Disconnect from the underlying PDO connection.

Connection::disableQueryLog() — Method in class Connection

Disable the query log on the connection.

ConnectionInterface::delete() — Method in class ConnectionInterface

Run a delete statement against the database.

$ ConnectionResolver#defaultProperty in class ConnectionResolver

The default connection name.

DatabaseInspectionCommandClass in namespace Illuminate\Database\Console
DbCommandClass in namespace Illuminate\Database\Console
$ DbCommand#descriptionProperty in class DbCommand

The console command description.

DumpCommandClass in namespace Illuminate\Database\Console
$ DumpCommand#descriptionProperty in class DumpCommand

The console command description.

$ FactoryMakeCommand#descriptionProperty in class FactoryMakeCommand

The console command description.

$ FreshCommand#descriptionProperty in class FreshCommand

The console command description.

$ InstallCommand#descriptionProperty in class InstallCommand

The console command description.

$ MigrateCommand#descriptionProperty in class MigrateCommand

The console command description.

$ MigrateCommand#dispatcherProperty in class MigrateCommand

The event dispatcher instance.

$ MigrateMakeCommand#descriptionProperty in class MigrateMakeCommand

The console command description.

$ RefreshCommand#descriptionProperty in class RefreshCommand

The console command description.

$ ResetCommand#descriptionProperty in class ResetCommand

The console command description.

$ RollbackCommand#descriptionProperty in class RollbackCommand

The console command description.

$ StatusCommand#descriptionProperty in class StatusCommand

The console command description.

$ MonitorCommand#descriptionProperty in class MonitorCommand

The console command description.

MonitorCommand::displayConnections() — Method in class MonitorCommand

Display the databases and their connection counts in the console.

MonitorCommand::dispatchEvents() — Method in class MonitorCommand

Dispatch the database monitoring events.

$ PruneCommand#descriptionProperty in class PruneCommand

The console command description.

$ SeedCommand#descriptionProperty in class SeedCommand

The console command description.

$ SeederMakeCommand#descriptionProperty in class SeederMakeCommand

The console command description.

$ ShowCommand#descriptionProperty in class ShowCommand

The console command description.

ShowCommand::display() — Method in class ShowCommand

Render the database information.

ShowCommand::displayJson() — Method in class ShowCommand

Render the database information as JSON.

ShowCommand::displayForCli() — Method in class ShowCommand

Render the database information formatted for the CLI.

$ ShowModelCommand#descriptionProperty in class ShowModelCommand

The console command description.

ShowModelCommand::display() — Method in class ShowModelCommand

Render the model information.

ShowModelCommand::displayJson() — Method in class ShowModelCommand

Render the model information as JSON.

ShowModelCommand::displayCli() — Method in class ShowModelCommand

Render the model information for the CLI.

$ TableCommand#descriptionProperty in class TableCommand

The console command description.

TableCommand::display() — Method in class TableCommand

Render the table information.

TableCommand::displayJson() — Method in class TableCommand

Render the table information as JSON.

TableCommand::displayForCli() — Method in class TableCommand

Render the table information formatted for the CLI.

$ WipeCommand#descriptionProperty in class WipeCommand

The console command description.

WipeCommand::dropAllTables() — Method in class WipeCommand

Drop all of the database tables.

WipeCommand::dropAllViews() — Method in class WipeCommand

Drop all of the database views.

WipeCommand::dropAllTypes() — Method in class WipeCommand

Drop all of the database types.

DatabaseManagerClass in namespace Illuminate\Database
$ DatabaseManager#doctrineTypesProperty in class DatabaseManager

The custom Doctrine column types.

DatabaseManager::disconnect() — Method in class DatabaseManager

Disconnect from the given database.

DatabaseServiceProviderClass in namespace Illuminate\Database
DatabaseTransactionRecordClass in namespace Illuminate\Database
DatabaseTransactionsManagerClass in namespace Illuminate\Database
DeadlockExceptionClass in namespace Illuminate\Database
DetectsConcurrencyErrorsClass in namespace Illuminate\Database
DetectsLostConnectionsClass in namespace Illuminate\Database
Builder::decrement() — Method in class Builder

Decrement a column's value by a given amount.

Builder::delete() — Method in class Builder

Delete records from the database.

Builder::defaultKeyName() — Method in class Builder

Get the default key name of the table.

Collection::diff() — Method in class Collection

Diff the collection with the given items.

Collection::duplicateComparator() — Method in class Collection

Get the comparison function to detect duplicates.

$ HasAttributes#dateFormatProperty in class HasAttributes

The storage format of the model's date columns.

HasAttributes::deviateClassCastableAttribute() — Method in class HasAttributes

Increment or decrement the given attribute using the custom cast class.

HasAttributes::discardChanges() — Method in class HasAttributes

Discard attribute changes and reset the attributes to their original state.

$ HasEvents#dispatchesEventsProperty in class HasEvents

The event map for the model.

HasEvents::deleting() — Method in class HasEvents

Register a deleting model event with the dispatcher.

HasEvents::deleted() — Method in class HasEvents

Register a deleted model event with the dispatcher.

QueriesRelationships::doesntHave() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query.

QueriesRelationships::doesntHaveMorph() — Method in class QueriesRelationships

Add a polymorphic relationship count / exists condition to the query.

Factory::definition() — Method in class Factory

Define the model's default state.

$ Model#dispatcherProperty in class Model

The event dispatcher instance.

$ Model#discardedAttributeViolationCallbackProperty in class Model

The callback that is responsible for handling discarded attribute violations.

Model::decrement() — Method in class Model

Decrement a column's value by a given amount.

Model::decrementQuietly() — Method in class Model

Decrement a column's value by a given amount without raising any events.

Model::destroy() — Method in class Model

Destroy the models for the given IDs.

Model::delete() — Method in class Model

Delete the model from the database.

Model::deleteQuietly() — Method in class Model

Delete the model from the database without raising any events.

Model::deleteOrFail() — Method in class Model

Delete the model from the database within a transaction.

BelongsTo::dissociate() — Method in class BelongsTo

Dissociate previously associated model from the given parent.

BelongsTo::disassociate() — Method in class BelongsTo

Alias of "dissociate" method.

AsPivot::delete() — Method in class AsPivot

Delete the pivot model record from the database.

InteractsWithPivotTable::detach() — Method in class InteractsWithPivotTable

Detach models from the relationship.

InteractsWithPivotTable::detachUsingCustomClass() — Method in class InteractsWithPivotTable

Detach models from the relationship using a custom class.

MorphPivot::delete() — Method in class MorphPivot

Delete the pivot model record from the database.

$ MorphTo#dictionaryProperty in class MorphTo

All of the models keyed by ID.

MorphTo::dissociate() — Method in class MorphTo

Dissociate previously associated model from the given parent.

DatabaseBusyClass in namespace Illuminate\Database\Events
DatabaseRefreshedClass in namespace Illuminate\Database\Events
DatabaseMigrationRepositoryClass in namespace Illuminate\Database\Migrations
DatabaseMigrationRepository::delete() — Method in class DatabaseMigrationRepository

Remove a migration from the log.

DatabaseMigrationRepository::deleteRepository() — Method in class DatabaseMigrationRepository

Delete the migration repository data store.

MigrationRepositoryInterface::delete() — Method in class MigrationRepositoryInterface

Remove a migration from the log.

MigrationRepositoryInterface::deleteRepository() — Method in class MigrationRepositoryInterface

Delete the migration repository data store.

Migrator::deleteRepository() — Method in class Migrator

Delete the migration repository data store.

$ Builder#distinctProperty in class Builder

Indicates if the query returns distinct results.

Builder::distinct() — Method in class Builder

Force the query to only return distinct results.

Builder::dynamicWhere() — Method in class Builder

Handles dynamic "where" clauses to the query.

Builder::doesntExist() — Method in class Builder

Determine if no rows exist for the current query.

Builder::doesntExistOr() — Method in class Builder

Execute the given callback if rows exist for the current query.

Builder::decrement() — Method in class Builder

Decrement a column's value by a given amount.

Builder::decrementEach() — Method in class Builder

Decrement the given column's values by the given amounts.

Builder::delete() — Method in class Builder

Delete records from the database.

Builder::defaultKeyName() — Method in class Builder

Get the default key name of the table.

Builder::dump() — Method in class Builder

Dump the current SQL and bindings.

Builder::dd() — Method in class Builder

Die and dump the current SQL and bindings.

Grammar::dateBasedWhere() — Method in class Grammar

Compile a date based where clause.

PostgresGrammar::dateBasedWhere() — Method in class PostgresGrammar

Compile a date based where clause.

SQLiteGrammar::dateBasedWhere() — Method in class SQLiteGrammar

Compile a date based where clause.

Blueprint::drop() — Method in class Blueprint

Indicate that the table should be dropped.

Blueprint::dropIfExists() — Method in class Blueprint

Indicate that the table should be dropped if it exists.

Blueprint::dropColumn() — Method in class Blueprint

Indicate that the given columns should be dropped.

Blueprint::dropPrimary() — Method in class Blueprint

Indicate that the given primary key should be dropped.

Blueprint::dropUnique() — Method in class Blueprint

Indicate that the given unique key should be dropped.

Blueprint::dropIndex() — Method in class Blueprint

Indicate that the given index should be dropped.

Blueprint::dropFullText() — Method in class Blueprint

Indicate that the given fulltext index should be dropped.

Blueprint::dropSpatialIndex() — Method in class Blueprint

Indicate that the given spatial index should be dropped.

Blueprint::dropForeign() — Method in class Blueprint

Indicate that the given foreign key should be dropped.

Blueprint::dropConstrainedForeignId() — Method in class Blueprint

Indicate that the given column and foreign key should be dropped.

Blueprint::dropForeignIdFor() — Method in class Blueprint

Indicate that the given foreign key should be dropped.

Blueprint::dropConstrainedForeignIdFor() — Method in class Blueprint

Indicate that the given foreign key should be dropped.

Blueprint::dropTimestamps() — Method in class Blueprint

Indicate that the timestamp columns should be dropped.

Blueprint::dropTimestampsTz() — Method in class Blueprint

Indicate that the timestamp columns should be dropped.

Blueprint::dropSoftDeletes() — Method in class Blueprint

Indicate that the soft delete column should be dropped.

Blueprint::dropSoftDeletesTz() — Method in class Blueprint

Indicate that the soft delete column should be dropped.

Blueprint::dropRememberToken() — Method in class Blueprint

Indicate that the remember token column should be dropped.

Blueprint::dropMorphs() — Method in class Blueprint

Indicate that the polymorphic columns should be dropped.

Blueprint::double() — Method in class Blueprint

Create a new double column on the table.

Blueprint::decimal() — Method in class Blueprint

Create a new decimal column on the table.

Blueprint::date() — Method in class Blueprint

Create a new date column on the table.

Blueprint::dateTime() — Method in class Blueprint

Create a new date-time column on the table.

Blueprint::dateTimeTz() — Method in class Blueprint

Create a new date-time column (with time zone) on the table.

Blueprint::datetimes() — Method in class Blueprint

Add creation and update datetime columns to the table.

Blueprint::dropIndexCommand() — Method in class Blueprint

Create a new drop index command on the blueprint.

$ Builder#defaultStringLengthProperty in class Builder

The default string length for migrations.

$ Builder#defaultMorphKeyTypeProperty in class Builder

The default relationship morph key type.

Builder::defaultStringLength() — Method in class Builder

Set the default string length for migrations.

Builder::defaultMorphKeyType() — Method in class Builder

Set the default morph key type for migrations.

Builder::dropDatabaseIfExists() — Method in class Builder

Drop a database from the schema if the database exists.

Builder::drop() — Method in class Builder

Drop a table from the schema.

Builder::dropIfExists() — Method in class Builder

Drop a table from the schema if it exists.

Builder::dropColumns() — Method in class Builder

Drop columns from a table schema.

Builder::dropAllTables() — Method in class Builder

Drop all tables from the database.

Builder::dropAllViews() — Method in class Builder

Drop all views from the database.

Builder::dropAllTypes() — Method in class Builder

Drop all types from the database.

Builder::disableForeignKeyConstraints() — Method in class Builder

Disable foreign key constraints.

ColumnDefinition::default() — Method in class ColumnDefinition

Specify a "default" value for the column

ForeignKeyDefinition::deferrable() — Method in class ForeignKeyDefinition
ChangeColumn::doesntNeedCharacterOptions() — Method in class ChangeColumn

Determine if the given type does not need character / collation options.

IndexDefinition::deferrable() — Method in class IndexDefinition
MySqlBuilder::dropDatabaseIfExists() — Method in class MySqlBuilder

Drop a database from the schema if the database exists.

MySqlBuilder::dropAllTables() — Method in class MySqlBuilder

Drop all tables from the database.

MySqlBuilder::dropAllViews() — Method in class MySqlBuilder

Drop all views from the database.

MySqlSchemaState::dump() — Method in class MySqlSchemaState

Dump the database's schema into a file.

PostgresBuilder::dropDatabaseIfExists() — Method in class PostgresBuilder

Drop a database from the schema if the database exists.

PostgresBuilder::dropAllTables() — Method in class PostgresBuilder

Drop all tables from the database.

PostgresBuilder::dropAllViews() — Method in class PostgresBuilder

Drop all views from the database.

PostgresBuilder::dropAllTypes() — Method in class PostgresBuilder

Drop all types from the database.

PostgresSchemaState::dump() — Method in class PostgresSchemaState

Dump the database's schema into a file.

SQLiteBuilder::dropDatabaseIfExists() — Method in class SQLiteBuilder

Drop a database from the schema if the database exists.

SQLiteBuilder::dropAllTables() — Method in class SQLiteBuilder

Drop all tables from the database.

SQLiteBuilder::dropAllViews() — Method in class SQLiteBuilder

Drop all views from the database.

SchemaState::dump() — Method in class SchemaState

Dump the database's schema into a file.

SqlServerBuilder::dropDatabaseIfExists() — Method in class SqlServerBuilder

Drop a database from the schema if the database exists.

SqlServerBuilder::dropAllTables() — Method in class SqlServerBuilder

Drop all tables from the database.

SqlServerBuilder::dropAllViews() — Method in class SqlServerBuilder

Drop all views from the database.

SqliteSchemaState::dump() — Method in class SqliteSchemaState

Dump the database's schema into a file.

Encrypter::decrypt() — Method in class Encrypter

Decrypt the given value.

Encrypter::decryptString() — Method in class Encrypter

Decrypt the given string without unserialization.

$ CallQueuedListener#dataProperty in class CallQueuedListener

The data to be passed to the listener.

CallQueuedListener::displayName() — Method in class CallQueuedListener

Get the display name for the queued job.

DispatcherClass in namespace Illuminate\Events
Dispatcher::dispatch() — Method in class Dispatcher

Fire an event and call the listeners.

$ NullDispatcher#dispatcherProperty in class NullDispatcher

The underlying event dispatcher instance.

NullDispatcher::dispatch() — Method in class NullDispatcher

Don't fire an event.

$ QueuedClosure#delayProperty in class QueuedClosure

The number of seconds before the job should be made available.

QueuedClosure::delay() — Method in class QueuedClosure

Set the desired delay in seconds for the job.

Filesystem::delete() — Method in class Filesystem

Delete the file at a given path.

Filesystem::dirname() — Method in class Filesystem

Extract the parent directory from a file path.

Filesystem::directories() — Method in class Filesystem

Get all of the directories within a given directory.

Filesystem::deleteDirectory() — Method in class Filesystem

Recursively delete a directory.

Filesystem::deleteDirectories() — Method in class Filesystem

Remove all of the directories within a given directory.

$ FilesystemAdapter#driverProperty in class FilesystemAdapter

The Flysystem filesystem implementation.

FilesystemAdapter::directoryExists() — Method in class FilesystemAdapter

Determine if a directory exists.

FilesystemAdapter::directoryMissing() — Method in class FilesystemAdapter

Determine if a directory is missing.

FilesystemAdapter::download() — Method in class FilesystemAdapter

Create a streamed download response for a given file.

FilesystemAdapter::delete() — Method in class FilesystemAdapter

Delete the file at a given path.

FilesystemAdapter::directories() — Method in class FilesystemAdapter

Get all of the directories within a given directory.

FilesystemAdapter::deleteDirectory() — Method in class FilesystemAdapter

Recursively delete a directory.

$ FilesystemManager#disksProperty in class FilesystemManager

The array of resolved filesystem drivers.

FilesystemManager::drive() — Method in class FilesystemManager

Get a filesystem instance.

FilesystemManager::disk() — Method in class FilesystemManager

Get a filesystem instance.

$ Application#deferredServicesProperty in class Application

The deferred services and their providers.

$ Application#databasePathProperty in class Application

The custom database path defined by the developer.

Application::databasePath() — Method in class Application

Get the path to the database directory.

Application::detectEnvironment() — Method in class Application

Detect the application's current environment.

DispatchableClass in namespace Illuminate\Foundation\Bus
Dispatchable::dispatch() — Method in class Dispatchable

Dispatch the job with the given arguments.

Dispatchable::dispatchIf() — Method in class Dispatchable

Dispatch the job with the given arguments if the given truth test passes.

Dispatchable::dispatchUnless() — Method in class Dispatchable

Dispatch the job with the given arguments unless the given truth test passes.

Dispatchable::dispatchSync() — Method in class Dispatchable

Dispatch a command to its appropriate handler in the current process.

Dispatchable::dispatchAfterResponse() — Method in class Dispatchable

Dispatch a command to its appropriate handler after the current process.

DispatchesJobsClass in namespace Illuminate\Foundation\Bus
DispatchesJobs::dispatch() — Method in class DispatchesJobs

Dispatch a job to its appropriate handler.

DispatchesJobs::dispatchSync() — Method in class DispatchesJobs

Dispatch a job to its appropriate handler in the current process.

$ PendingChain#delayProperty in class PendingChain

The number of seconds before the chain should be made available.

PendingChain::delay() — Method in class PendingChain

Set the desired delay in seconds for the chain.

PendingChain::dispatch() — Method in class PendingChain

Dispatch the job with the given arguments.

PendingDispatch::delay() — Method in class PendingDispatch

Set the desired delay in seconds for the job.

CacheBasedMaintenanceMode::deactivate() — Method in class CacheBasedMaintenanceMode

Take the application out of maintenance.

CacheBasedMaintenanceMode::data() — Method in class CacheBasedMaintenanceMode

Get the data array which was provided when the application was placed into maintenance.

$ ResolvesDumpSource#dumpSourceResolverProperty in class ResolvesDumpSource
ResolvesDumpSource::dontIncludeSource() — Method in class ResolvesDumpSource

Don't include the location / file of the dump in dumps.

$ AboutCommand#descriptionProperty in class AboutCommand

The console command description.

$ AboutCommand#dataProperty in class AboutCommand

The data to display.

AboutCommand::display() — Method in class AboutCommand

Display the application information.

AboutCommand::displayDetail() — Method in class AboutCommand

Display the application information as a detail view.

AboutCommand::displayJson() — Method in class AboutCommand

Display the application information as JSON.

$ CastMakeCommand#descriptionProperty in class CastMakeCommand

The console command description.

$ ChannelListCommand#descriptionProperty in class ChannelListCommand

The console command description.

ChannelListCommand::displayChannels() — Method in class ChannelListCommand

Display the channel information on the console.

ChannelListCommand::determineChannelCountOutput() — Method in class ChannelListCommand

Determine and return the output for displaying the number of registered chanels in the CLI output.

$ ChannelMakeCommand#descriptionProperty in class ChannelMakeCommand

The console command description.

$ ClearCompiledCommand#descriptionProperty in class ClearCompiledCommand

The console command description.

$ CliDumper#dumpingProperty in class CliDumper

If the dumper is currently dumping.

CliDumper::dumpWithSource() — Method in class CliDumper

Dump a variable with its source file / line.

ClosureCommand::describe() — Method in class ClosureCommand

Set the description for the command.

$ ComponentMakeCommand#descriptionProperty in class ComponentMakeCommand

The console command description.

$ ConfigCacheCommand#descriptionProperty in class ConfigCacheCommand

The console command description.

$ ConfigClearCommand#descriptionProperty in class ConfigClearCommand

The console command description.

$ ConsoleMakeCommand#descriptionProperty in class ConsoleMakeCommand

The console command description.

DocsCommandClass in namespace Illuminate\Foundation\Console
$ DocsCommand#descriptionProperty in class DocsCommand

The console command description.

DocsCommand::didNotRequestPage() — Method in class DocsCommand

Determine if the user requested a specific page when calling the command.

DocsCommand::didNotRequestSection() — Method in class DocsCommand

Determine if the user requested a specific section when calling the command.

DocsCommand::docs() — Method in class DocsCommand

Get the documentation index as a collection.

DownCommandClass in namespace Illuminate\Foundation\Console
$ DownCommand#descriptionProperty in class DownCommand

The console command description.

$ EnvironmentCommand#descriptionProperty in class EnvironmentCommand

The console command description.

$ EnvironmentDecryptCommand#descriptionProperty in class EnvironmentDecryptCommand

The console command description.

$ EnvironmentEncryptCommand#descriptionProperty in class EnvironmentEncryptCommand

The console command description.

$ EventCacheCommand#descriptionProperty in class EventCacheCommand

The console command description.

$ EventClearCommand#descriptionProperty in class EventClearCommand

The console command description.

$ EventGenerateCommand#descriptionProperty in class EventGenerateCommand

The console command description.

$ EventListCommand#descriptionProperty in class EventListCommand

The console command description.

$ EventMakeCommand#descriptionProperty in class EventMakeCommand

The console command description.

$ ExceptionMakeCommand#descriptionProperty in class ExceptionMakeCommand

The console command description.

$ JobMakeCommand#descriptionProperty in class JobMakeCommand

The console command description.

Kernel::defineConsoleSchedule() — Method in class Kernel

Define the application's command schedule.

$ KeyGenerateCommand#descriptionProperty in class KeyGenerateCommand

The console command description.

$ LangPublishCommand#descriptionProperty in class LangPublishCommand

The console command description.

$ ListenerMakeCommand#descriptionProperty in class ListenerMakeCommand

The console command description.

$ MailMakeCommand#descriptionProperty in class MailMakeCommand

The console command description.

$ ModelMakeCommand#descriptionProperty in class ModelMakeCommand

The console command description.

$ NotificationMakeCommand#descriptionProperty in class NotificationMakeCommand

The console command description.

$ ObserverMakeCommand#descriptionProperty in class ObserverMakeCommand

The console command description.

$ OptimizeClearCommand#descriptionProperty in class OptimizeClearCommand

The console command description.

$ OptimizeCommand#descriptionProperty in class OptimizeCommand

The console command description.

$ PackageDiscoverCommand#descriptionProperty in class PackageDiscoverCommand

The console command description.

$ PolicyMakeCommand#descriptionProperty in class PolicyMakeCommand

The console command description.

$ ProviderMakeCommand#descriptionProperty in class ProviderMakeCommand

The console command description.

$ QueuedCommand#dataProperty in class QueuedCommand

The data to pass to the Artisan command.

$ RequestMakeCommand#descriptionProperty in class RequestMakeCommand

The console command description.

$ ResourceMakeCommand#descriptionProperty in class ResourceMakeCommand

The console command description.

$ RouteCacheCommand#descriptionProperty in class RouteCacheCommand

The console command description.

$ RouteClearCommand#descriptionProperty in class RouteClearCommand

The console command description.

$ RouteListCommand#descriptionProperty in class RouteListCommand

The console command description.

RouteListCommand::displayRoutes() — Method in class RouteListCommand

Display the route information on the console.

RouteListCommand::determineRouteCountOutput() — Method in class RouteListCommand

Determine and return the output for displaying the number of routes in the CLI output.

$ RuleMakeCommand#descriptionProperty in class RuleMakeCommand

The console command description.

$ ScopeMakeCommand#descriptionProperty in class ScopeMakeCommand

The console command description.

$ ServeCommand#descriptionProperty in class ServeCommand

The console command description.

$ StorageLinkCommand#descriptionProperty in class StorageLinkCommand

The console command description.

$ StubPublishCommand#descriptionProperty in class StubPublishCommand

The console command description.

$ TestMakeCommand#descriptionProperty in class TestMakeCommand

The console command description.

$ UpCommand#descriptionProperty in class UpCommand

The console command description.

$ VendorPublishCommand#descriptionProperty in class VendorPublishCommand

The console command description.

VendorPublishCommand::determineWhatShouldBePublished() — Method in class VendorPublishCommand

Determine the provider or tag(s) to publish.

$ ViewCacheCommand#descriptionProperty in class ViewCacheCommand

The console command description.

$ ViewClearCommand#descriptionProperty in class ViewClearCommand

The console command description.

EnvironmentDetector::detect() — Method in class EnvironmentDetector

Detect the application's current environment.

EnvironmentDetector::detectWebEnvironment() — Method in class EnvironmentDetector

Set the application environment for a web request.

EnvironmentDetector::detectConsoleEnvironment() — Method in class EnvironmentDetector

Set the application environment from command-line arguments.

DiscoverEventsClass in namespace Illuminate\Foundation\Events
DispatchableClass in namespace Illuminate\Foundation\Events
Dispatchable::dispatch() — Method in class Dispatchable

Dispatch the event with the given arguments.

Dispatchable::dispatchIf() — Method in class Dispatchable

Dispatch the event with the given arguments if the given truth test passes.

Dispatchable::dispatchUnless() — Method in class Dispatchable

Dispatch the event with the given arguments unless the given truth test passes.

$ Handler#dontReportProperty in class Handler

A list of the exception types that are not reported.

$ Handler#dontFlashProperty in class Handler

A list of the inputs that are never flashed for validation exceptions.

WhoopsHandler::directoriesExceptVendor() — Method in class WhoopsHandler

Get the application paths except for the "vendor" directory.

FileBasedMaintenanceMode::deactivate() — Method in class FileBasedMaintenanceMode

Take the application out of maintenance.

FileBasedMaintenanceMode::data() — Method in class FileBasedMaintenanceMode

Get the data array which was provided when the application was placed into maintenance.

$ HtmlDumper#dumpingProperty in class HtmlDumper

If the dumper is currently dumping.

HtmlDumper::dumpWithSource() — Method in class HtmlDumper

Dump a variable with its source file / line.

Kernel::dispatchToRouter() — Method in class Kernel

Get the route dispatcher callback.

$ ArtisanServiceProvider#devCommandsProperty in class ArtisanServiceProvider

The commands to be registered.

PrecognitionCallableDispatcher::dispatch() — Method in class PrecognitionCallableDispatcher

Dispatch a request to a given callable.

PrecognitionControllerDispatcher::dispatch() — Method in class PrecognitionControllerDispatcher

Dispatch a request to a given controller and method.

EventServiceProvider::discoveredEvents() — Method in class EventServiceProvider

Get the discovered events for the application.

EventServiceProvider::discoverEvents() — Method in class EventServiceProvider

Discover the events and listeners for the application.

EventServiceProvider::discoverEventsWithin() — Method in class EventServiceProvider

Get the listener directories that should be used to discover events.

$ MakesHttpRequests#defaultHeadersProperty in class MakesHttpRequests

Additional headers for the request.

$ MakesHttpRequests#defaultCookiesProperty in class MakesHttpRequests

Additional cookies for the request.

DatabaseMigrationsClass in namespace Illuminate\Foundation\Testing
DatabaseTransactionsClass in namespace Illuminate\Foundation\Testing
DatabaseTruncationClass in namespace Illuminate\Foundation\Testing
WithoutEvents::disableEventsForAllTests() — Method in class WithoutEvents

Prevent all event handles from being executed.

WithoutMiddleware::disableMiddlewareForAllTests() — Method in class WithoutMiddleware

Prevent all middleware from being executed for this test class.

Wormhole::day() — Method in class Wormhole

Travel forward the given number of days.

Wormhole::days() — Method in class Wormhole

Travel forward the given number of days.

DeterminesStatusCodeClass in namespace Illuminate\Http\Client\Concerns
$ Factory#dispatcherProperty in class Factory

The event dispatcher implementation.

PendingRequest::dump() — Method in class PendingRequest

Dump the request before sending.

PendingRequest::dd() — Method in class PendingRequest

Dump the request before sending and end the script.

PendingRequest::delete() — Method in class PendingRequest

Issue a DELETE request to the given URL.

PendingRequest::dispatchRequestSendingEvent() — Method in class PendingRequest

Dispatch the RequestSending event if a dispatcher is available.

PendingRequest::dispatchResponseReceivedEvent() — Method in class PendingRequest

Dispatch the ResponseReceived event if a dispatcher is available.

PendingRequest::dispatchConnectionFailedEvent() — Method in class PendingRequest

Dispatch the ConnectionFailed event if a dispatcher is available.

$ Request#dataProperty in class Request

The decoded payload for the request.

Request::data() — Method in class Request

Get the request's data (form parameters or JSON).

$ Response#decodedProperty in class Response

The decoded JSON response.

ResponseSequence::dontFailWhenEmpty() — Method in class ResponseSequence

Make the sequence return a default response when it is empty.

InteractsWithInput::date() — Method in class InteractsWithInput

Retrieve input from the request as a Carbon instance.

InteractsWithInput::dd() — Method in class InteractsWithInput

Dump the request items and end the script.

InteractsWithInput::dump() — Method in class InteractsWithInput

Dump the items.

Request::decodedPath() — Method in class Request

Get the current decoded path info for the request.

Request::duplicate() — Method in class Request
{@inheritdoc}
DelegatesToResourceClass in namespace Illuminate\Http\Resources
$ MergeValue#dataProperty in class MergeValue

The data to be merged.

$ LogManager#dateFormatProperty in class LogManager

The standard date format to use when writing logs.

LogManager::driver() — Method in class LogManager

Get a log driver instance.

LogManager::debug() — Method in class LogManager

Detailed debug information.

$ Logger#dispatcherProperty in class Logger

The event dispatcher instance.

Logger::debug() — Method in class Logger

Log a debug message to the logs.

$ MessageSending#dataProperty in class MessageSending

The message data.

$ MessageSent#dataProperty in class MessageSent

The message data.

MailManager::driver() — Method in class MailManager

Get a mailer driver instance.

$ Mailable#diskAttachmentsProperty in class Mailable

The attachments from a storage disk.

Mailer::dispatchSentEvent() — Method in class Mailer

Dispatch the message sent event.

SendQueuedMailable::displayName() — Method in class SendQueuedMailable

Get the display name for the queued job.

SesTransport::doSend() — Method in class SesTransport
{@inheritDoc}
SesV2Transport::doSend() — Method in class SesV2Transport
{@inheritDoc}
$ ChannelManager#defaultChannelProperty in class ChannelManager

The default channel used to deliver messages.

ChannelManager::deliversVia() — Method in class ChannelManager

Get the default channel driver name.

ChannelManager::deliverVia() — Method in class ChannelManager

Set the default channel driver name.

DatabaseChannelClass in namespace Illuminate\Notifications\Channels
$ NotificationTableCommand#descriptionProperty in class NotificationTableCommand

The console command description.

DatabaseNotificationClass in namespace Illuminate\Notifications
DatabaseNotificationCollectionClass in namespace Illuminate\Notifications
$ BroadcastNotificationCreated#dataProperty in class BroadcastNotificationCreated

The notification data.

$ NotificationFailed#dataProperty in class NotificationFailed

The data needed to process this failure.

$ BroadcastMessage#dataProperty in class BroadcastMessage

The data for the notification.

BroadcastMessage::data() — Method in class BroadcastMessage

Set the message data.

DatabaseMessageClass in namespace Illuminate\Notifications\Messages
$ DatabaseMessage#dataProperty in class DatabaseMessage

The data that should be stored with the notification.

MailMessage::data() — Method in class MailMessage

Get the data array for the mail message.

SendQueuedNotifications::displayName() — Method in class SendQueuedNotifications

Get the display name for the queued job.

$ AbstractPaginator#defaultViewProperty in class AbstractPaginator

The default pagination view.

$ AbstractPaginator#defaultSimpleViewProperty in class AbstractPaginator

The default "simple" pagination view.

AbstractPaginator::defaultView() — Method in class AbstractPaginator

Set the default pagination view.

AbstractPaginator::defaultSimpleView() — Method in class AbstractPaginator

Set the default "simple" pagination view.

Hub::defaults() — Method in class Hub

Define the default named pipeline.

Factory::describe() — Method in class Factory

Begin describing a fake process lifecycle.

FakeProcessSequence::dontFailWhenEmpty() — Method in class FakeProcessSequence

Make the sequence return a default result when it is empty.

$ BeanstalkdQueue#defaultProperty in class BeanstalkdQueue

The name of the default tube.

BeanstalkdQueue::deleteMessage() — Method in class BeanstalkdQueue

Delete a message from the Beanstalk queue.

$ CallQueuedClosure#deleteWhenMissingModelsProperty in class CallQueuedClosure

Indicate if the job should be deleted when models are missing.

CallQueuedClosure::displayName() — Method in class CallQueuedClosure

Get the display name for the queued job.

$ CallQueuedHandler#dispatcherProperty in class CallQueuedHandler

The bus dispatcher implementation.

CallQueuedHandler::dispatchThroughMiddleware() — Method in class CallQueuedHandler

Dispatch the given job / command through its specified middleware.

DatabaseConnectorClass in namespace Illuminate\Queue\Connectors
$ BatchesTableCommand#descriptionProperty in class BatchesTableCommand

The console command description.

$ ClearCommand#descriptionProperty in class ClearCommand

The console command description.

$ FailedTableCommand#descriptionProperty in class FailedTableCommand

The console command description.

$ FlushFailedCommand#descriptionProperty in class FlushFailedCommand

The console command description.

$ ForgetFailedCommand#descriptionProperty in class ForgetFailedCommand

The console command description.

$ ListFailedCommand#descriptionProperty in class ListFailedCommand

The console command description.

ListFailedCommand::displayFailedJobs() — Method in class ListFailedCommand

Display the failed jobs in the console.

$ ListenCommand#descriptionProperty in class ListenCommand

The console command description.

$ MonitorCommand#descriptionProperty in class MonitorCommand

The console command description.

MonitorCommand::displaySizes() — Method in class MonitorCommand

Display the queue sizes in the console.

MonitorCommand::dispatchEvents() — Method in class MonitorCommand

Fire the monitoring events.

$ PruneBatchesCommand#descriptionProperty in class PruneBatchesCommand

The console command description.

$ PruneFailedJobsCommand#descriptionProperty in class PruneFailedJobsCommand

The console command description.

$ RestartCommand#descriptionProperty in class RestartCommand

The console command description.

$ RetryBatchCommand#descriptionProperty in class RetryBatchCommand

The console command description.

$ RetryCommand#descriptionProperty in class RetryCommand

The console command description.

$ TableCommand#descriptionProperty in class TableCommand

The console command description.

$ WorkCommand#descriptionProperty in class WorkCommand

The console command description.

WorkCommand::downForMaintenance() — Method in class WorkCommand

Determine if the worker should run in maintenance mode.

DatabaseQueueClass in namespace Illuminate\Queue
$ DatabaseQueue#databaseProperty in class DatabaseQueue

The database connection instance.

$ DatabaseQueue#defaultProperty in class DatabaseQueue

The name of the default queue.

DatabaseQueue::deleteReserved() — Method in class DatabaseQueue

Delete a reserved job from the queue.

DatabaseQueue::deleteAndRelease() — Method in class DatabaseQueue

Delete a reserved job from the reserved queue and release it.

DatabaseFailedJobProviderClass in namespace Illuminate\Queue\Failed
$ DatabaseFailedJobProvider#databaseProperty in class DatabaseFailedJobProvider

The database connection name.

DatabaseUuidFailedJobProviderClass in namespace Illuminate\Queue\Failed
$ DatabaseUuidFailedJobProvider#databaseProperty in class DatabaseUuidFailedJobProvider

The database connection name.

DynamoDbFailedJobProviderClass in namespace Illuminate\Queue\Failed
$ DynamoDbFailedJobProvider#dynamoProperty in class DynamoDbFailedJobProvider

The DynamoDB client instance.

InteractsWithQueue::delete() — Method in class InteractsWithQueue

Delete the job from the queue.

BeanstalkdJob::delete() — Method in class BeanstalkdJob

Delete the job from the queue.

DatabaseJobClass in namespace Illuminate\Queue\Jobs
$ DatabaseJob#databaseProperty in class DatabaseJob

The database queue instance.

DatabaseJob::delete() — Method in class DatabaseJob

Delete the job from the queue.

DatabaseJobRecordClass in namespace Illuminate\Queue\Jobs
$ Job#deletedProperty in class Job

Indicates if the job has been deleted.

Job::delete() — Method in class Job

Delete the job from the queue.

$ RedisJob#decodedProperty in class RedisJob

The JSON decoded version of "$job".

RedisJob::delete() — Method in class RedisJob

Delete the job from the queue.

SqsJob::delete() — Method in class SqsJob

Delete the job from the queue.

RateLimited::dontRelease() — Method in class RateLimited

Do not release the job back to the queue if the limit is exceeded.

$ RateLimitedWithRedis#decaysAtProperty in class RateLimitedWithRedis

The timestamp of the end of the current duration by key.

$ ThrottlesExceptions#decayMinutesProperty in class ThrottlesExceptions

The number of minutes until the maximum attempts are reset.

WithoutOverlapping::dontRelease() — Method in class WithoutOverlapping

Do not release the job back to the queue if no lock can be acquired.

$ Queue#dispatchAfterCommitProperty in class Queue

Indicates that jobs should be dispatched after all database transactions have committed.

QueueServiceProvider::databaseFailedJobProvider() — Method in class QueueServiceProvider

Create a new database failed job provider.

QueueServiceProvider::databaseUuidFailedJobProvider() — Method in class QueueServiceProvider

Create a new database failed job provider that uses UUIDs as IDs.

QueueServiceProvider::dynamoFailedJobProvider() — Method in class QueueServiceProvider

Create a new DynamoDb failed job provider.

$ RedisQueue#defaultProperty in class RedisQueue

The name of the default queue.

RedisQueue::deleteReserved() — Method in class RedisQueue

Delete a reserved job from the queue.

RedisQueue::deleteAndRelease() — Method in class RedisQueue

Delete a reserved job from the reserved queue and release it.

$ SqsQueue#defaultProperty in class SqsQueue

The name of the default queue.

Worker::daemon() — Method in class Worker

Listen to the given queue in a loop.

Worker::daemonShouldRun() — Method in class Worker

Determine if the daemon should process on this iteration.

PhpRedisConnection::disconnect() — Method in class PhpRedisConnection

Disconnects from the Redis instance.

DurationLimiterClass in namespace Illuminate\Redis\Limiters
$ DurationLimiter#decaysAtProperty in class DurationLimiter

The timestamp of the end of the current duration.

DurationLimiterBuilderClass in namespace Illuminate\Redis\Limiters
$ DurationLimiterBuilder#decayProperty in class DurationLimiterBuilder

The amount of time the lock window is maintained.

$ RedisManager#driverProperty in class RedisManager

The name of the default driver.

RedisManager::disableEvents() — Method in class RedisManager

Disable the firing of Redis command events.

AbstractRouteCollection::dumper() — Method in class AbstractRouteCollection

Return the CompiledUrlMatcherDumper instance for the route collection.

CallableDispatcher::dispatch() — Method in class CallableDispatcher

Dispatch a request to a given callable.

$ ControllerMakeCommand#descriptionProperty in class ControllerMakeCommand

The console command description.

$ MiddlewareMakeCommand#descriptionProperty in class MiddlewareMakeCommand

The console command description.

CallableDispatcher::dispatch() — Method in class CallableDispatcher

Dispatch a request to a given callable.

ControllerDispatcher::dispatch() — Method in class ControllerDispatcher

Dispatch a request to a given controller and method.

ControllerDispatcher::dispatch() — Method in class ControllerDispatcher

Dispatch a request to a given controller and method.

$ ThrottleRequestsWithRedis#decaysAtProperty in class ThrottleRequestsWithRedis

The timestamp of the end of the current duration by key.

PendingSingletonResourceRegistration::destroyable() — Method in class PendingSingletonResourceRegistration

Indicate that the resource should have a deletion route.

ResponseFactory::download() — Method in class ResponseFactory

Create a new file download response.

$ Route#defaultsProperty in class Route

The default values for the route.

Route::defaults() — Method in class Route

Set a default value for the route.

Route::domain() — Method in class Route

Get or set the domain for the route.

RouteRegistrar::delete() — Method in class RouteRegistrar
RouteRegistrar::domain() — Method in class RouteRegistrar
$ RouteUrlGenerator#defaultParametersProperty in class RouteUrlGenerator

The named parameter defaults.

$ RouteUrlGenerator#dontEncodeProperty in class RouteUrlGenerator

Characters that should not be URL encoded.

RouteUrlGenerator::defaults() — Method in class RouteUrlGenerator

Set the default named parameters used by the URL generator.

Router::delete() — Method in class Router

Register a new DELETE route with the router.

Router::dispatch() — Method in class Router

Dispatch the request to the application.

Router::dispatchToRoute() — Method in class Router

Dispatch the request to a route and return the response.

UrlGenerator::defaults() — Method in class UrlGenerator

Set the default named parameters used by the URL generator.

ArraySessionHandler::destroy() — Method in class ArraySessionHandler
{@inheritdoc}
CacheBasedSessionHandler::destroy() — Method in class CacheBasedSessionHandler
{@inheritdoc}
$ SessionTableCommand#descriptionProperty in class SessionTableCommand

The console command description.

CookieSessionHandler::destroy() — Method in class CookieSessionHandler
{@inheritdoc}
DatabaseSessionHandlerClass in namespace Illuminate\Session
DatabaseSessionHandler::destroy() — Method in class DatabaseSessionHandler
{@inheritdoc}
FileSessionHandler::destroy() — Method in class FileSessionHandler
{@inheritdoc}
NullSessionHandler::destroy() — Method in class NullSessionHandler
{@inheritdoc}
Store::decrement() — Method in class Store

Decrement the value of an item in the session.

Arr::divide() — Method in class Arr

Divide an array into two arrays. One with keys and the other with values.

Arr::dot() — Method in class Arr

Flatten a multi-dimensional associative array with dots.

Benchmark::dd() — Method in class Benchmark

Measure a callable or array of callables over the given number of iterations, then dump and die.

Collection::doesntContain() — Method in class Collection

Determine if an item is not contained in the collection.

Collection::diff() — Method in class Collection

Get the items in the collection that are not present in the given items.

Collection::diffUsing() — Method in class Collection

Get the items in the collection that are not present in the given items, using the callback.

Collection::diffAssoc() — Method in class Collection

Get the items in the collection whose keys and values are not present in the given items.

Collection::diffAssocUsing() — Method in class Collection

Get the items in the collection whose keys and values are not present in the given items, using the callback.

Collection::diffKeys() — Method in class Collection

Get the items in the collection whose keys are not present in the given items.

Collection::diffKeysUsing() — Method in class Collection

Get the items in the collection whose keys are not present in the given items, using the callback.

Collection::duplicates() — Method in class Collection

Retrieve duplicate items from the collection.

Collection::duplicatesStrict() — Method in class Collection

Retrieve duplicate items from the collection using strict comparison.

Collection::duplicateComparator() — Method in class Collection

Get the comparison function to detect duplicates.

Collection::dot() — Method in class Collection

Flatten a multi-dimensional associative array with dots.

Composer::dumpAutoloads() — Method in class Composer

Regenerate the Composer autoloader files.

Composer::dumpOptimized() — Method in class Composer

Regenerate the optimized Composer autoloader files.

$ ConfigurationUrlParser#driverAliasesProperty in class ConfigurationUrlParser

The drivers aliases map.

DateFactoryClass in namespace Illuminate\Support
$ DateFactory#dateClassProperty in class DateFactory

The type (class) of dates that should be created.

DateFactory::disableHumanDiffOption() — Method in class DateFactory
Enumerable::doesntContain() — Method in class Enumerable

Determine if an item is not contained in the collection.

Enumerable::dd() — Method in class Enumerable

Dump the collection and end the script.

Enumerable::dump() — Method in class Enumerable

Dump the collection.

Enumerable::diff() — Method in class Enumerable

Get the items that are not present in the given items.

Enumerable::diffUsing() — Method in class Enumerable

Get the items that are not present in the given items, using the callback.

Enumerable::diffAssoc() — Method in class Enumerable

Get the items whose keys and values are not present in the given items.

Enumerable::diffAssocUsing() — Method in class Enumerable

Get the items whose keys and values are not present in the given items, using the callback.

Enumerable::diffKeys() — Method in class Enumerable

Get the items whose keys are not present in the given items.

Enumerable::diffKeysUsing() — Method in class Enumerable

Get the items whose keys are not present in the given items, using the callback.

Enumerable::duplicates() — Method in class Enumerable

Retrieve duplicate items.

Enumerable::duplicatesStrict() — Method in class Enumerable

Retrieve duplicate items using strict comparison.

Env::disablePutenv() — Method in class Env

Disable the putenv adapter.

App::databasePath() — Method in class App
App::detectEnvironment() — Method in class App
Blade::directive() — Method in class Blade
Broadcast::driver() — Method in class Broadcast
Bus::dispatchChain() — Method in class Bus

Dispatch the given chain of jobs.

Bus::dispatch() — Method in class Bus
Bus::dispatchSync() — Method in class Bus
Bus::dispatchNow() — Method in class Bus
Bus::dispatchToQueue() — Method in class Bus
Bus::dispatchAfterResponse() — Method in class Bus
Bus::dispatched() — Method in class Bus
Bus::dispatchedSync() — Method in class Bus
Bus::dispatchedAfterResponse() — Method in class Bus
Bus::dispatchFakeBatch() — Method in class Bus
Cache::driver() — Method in class Cache
Cache::decrement() — Method in class Cache
Cache::delete() — Method in class Cache
Cache::deleteMultiple() — Method in class Cache
Crypt::decrypt() — Method in class Crypt
Crypt::decryptString() — Method in class Crypt
DBClass in namespace Illuminate\Support\Facades
DB::disconnect() — Method in class DB
DB::delete() — Method in class DB
DB::disableQueryLog() — Method in class DB
DateClass in namespace Illuminate\Support\Facades
Date::disableHumanDiffOption() — Method in class Date
Event::dispatch() — Method in class Event
Event::dispatched() — Method in class Event
Facade::defaultAliases() — Method in class Facade

Get the application default aliases.

File::delete() — Method in class File
File::dirname() — Method in class File
File::directories() — Method in class File
File::deleteDirectory() — Method in class File
File::deleteDirectories() — Method in class File
Gate::denyIf() — Method in class Gate
Gate::define() — Method in class Gate
Gate::denies() — Method in class Gate
Gate::denyWithStatus() — Method in class Gate
Gate::denyAsNotFound() — Method in class Gate
Hash::driver() — Method in class Hash
Http::dump() — Method in class Http
Http::dd() — Method in class Http
Http::delete() — Method in class Http
Lang::determineLocalesUsing() — Method in class Lang
Log::driver() — Method in class Log
Log::debug() — Method in class Log
Mail::driver() — Method in class Mail
Notification::deliversVia() — Method in class Notification
Notification::deliverVia() — Method in class Notification
Notification::driver() — Method in class Notification
Password::deleteToken() — Method in class Password
Process::describe() — Method in class Process
Redis::disableEvents() — Method in class Redis
Request::decodedPath() — Method in class Request
Request::duplicate() — Method in class Request
Request::date() — Method in class Request
Request::dd() — Method in class Request
Request::dump() — Method in class Request
Response::download() — Method in class Response
Route::delete() — Method in class Route
Route::dispatch() — Method in class Route
Route::dispatchToRoute() — Method in class Route
Route::domain() — Method in class Route
Schema::defaultStringLength() — Method in class Schema
Schema::defaultMorphKeyType() — Method in class Schema
Schema::dropDatabaseIfExists() — Method in class Schema
Schema::drop() — Method in class Schema
Schema::dropIfExists() — Method in class Schema
Schema::dropColumns() — Method in class Schema
Schema::dropAllTables() — Method in class Schema
Schema::dropAllViews() — Method in class Schema
Schema::dropAllTypes() — Method in class Schema
Schema::disableForeignKeyConstraints() — Method in class Schema
Session::driver() — Method in class Session
Session::decrement() — Method in class Session
Storage::drive() — Method in class Storage
Storage::disk() — Method in class Storage
Storage::delete() — Method in class Storage
Storage::directories() — Method in class Storage
Storage::deleteDirectory() — Method in class Storage
Storage::directoryExists() — Method in class Storage
Storage::directoryMissing() — Method in class Storage
Storage::download() — Method in class Storage
URL::defaults() — Method in class URL
View::decrementRender() — Method in class View
View::doneRendering() — Method in class View
LazyCollection::doesntContain() — Method in class LazyCollection

Determine if an item is not contained in the enumerable.

LazyCollection::diff() — Method in class LazyCollection

Get the items that are not present in the given items.

LazyCollection::diffUsing() — Method in class LazyCollection

Get the items that are not present in the given items, using the callback.

LazyCollection::diffAssoc() — Method in class LazyCollection

Get the items whose keys and values are not present in the given items.

LazyCollection::diffAssocUsing() — Method in class LazyCollection

Get the items whose keys and values are not present in the given items, using the callback.

LazyCollection::diffKeys() — Method in class LazyCollection

Get the items whose keys are not present in the given items.

LazyCollection::diffKeysUsing() — Method in class LazyCollection

Get the items whose keys are not present in the given items, using the callback.

LazyCollection::duplicates() — Method in class LazyCollection

Retrieve duplicate items.

LazyCollection::duplicatesStrict() — Method in class LazyCollection

Retrieve duplicate items using strict comparison.

LazyCollection::dot() — Method in class LazyCollection

Flatten a multi-dimensional associative array with dots.

Lottery::determineResultNormally() — Method in class Lottery

Indicate that the lottery results should be determined normally.

$ Manager#driversProperty in class Manager

The array of created "drivers".

Manager::driver() — Method in class Manager

Get a driver instance.

Stringable::dirname() — Method in class Stringable

Get the parent directory's path.

Stringable::dump() — Method in class Stringable

Dump the string.

Stringable::dd() — Method in class Stringable

Dump the string and end the script.

$ BatchFake#deletedProperty in class BatchFake

Indicates if the batch has been deleted.

BatchFake::decrementPendingJobs() — Method in class BatchFake

Decrement the pending jobs for the batch.

BatchFake::delete() — Method in class BatchFake

Delete the batch from storage.

BatchFake::deleted() — Method in class BatchFake

Determine if the batch has been deleted.

BatchRepositoryFake::decrementPendingJobs() — Method in class BatchRepositoryFake

Decrement the total number of pending jobs for the batch.

BatchRepositoryFake::delete() — Method in class BatchRepositoryFake

Delete the batch that has the given ID.

$ BusFake#dispatcherProperty in class BusFake

The original Bus dispatcher implementation.

BusFake::dispatched() — Method in class BusFake

Get all of the jobs matching a truth-test callback.

BusFake::dispatchedSync() — Method in class BusFake

Get all of the jobs dispatched synchronously matching a truth-test callback.

BusFake::dispatchedAfterResponse() — Method in class BusFake

Get all of the jobs dispatched after the response was sent matching a truth-test callback.

BusFake::dispatch() — Method in class BusFake

Dispatch a command to its appropriate handler.

BusFake::dispatchSync() — Method in class BusFake

Dispatch a command to its appropriate handler in the current process.

BusFake::dispatchNow() — Method in class BusFake

Dispatch a command to its appropriate handler in the current process.

BusFake::dispatchToQueue() — Method in class BusFake

Dispatch a command to its appropriate handler behind a queue.

BusFake::dispatchAfterResponse() — Method in class BusFake

Dispatch a command to its appropriate handler.

BusFake::dispatchFakeBatch() — Method in class BusFake

Dispatch an empty job batch for testing.

$ EventFake#dispatcherProperty in class EventFake

The original event dispatcher.

EventFake::dispatched() — Method in class EventFake

Get all of the events matching a truth-test callback.

EventFake::dispatch() — Method in class EventFake

Fire an event and call the listeners.

PendingBatchFake::dispatch() — Method in class PendingBatchFake

Dispatch the batch.

PendingBatchFake::dispatchAfterResponse() — Method in class PendingBatchFake

Dispatch the batch after the response is sent to the browser.

PendingChainFake::dispatch() — Method in class PendingChainFake

Dispatch the job with the given arguments.

Timebox::dontReturnEarly() — Method in class Timebox

Indicate that the timebox cannot return early.

$ EnumeratesValues#doesntContainProperty in class EnumeratesValues
EnumeratesValues::dd() — Method in class EnumeratesValues

Dump the items and end the script.

EnumeratesValues::dump() — Method in class EnumeratesValues

Dump the items.

$ AssertableJsonString#decodedProperty in class AssertableJsonString

The decoded json contents.

$ CountInDatabase#databaseProperty in class CountInDatabase

The database connection.

$ HasInDatabase#databaseProperty in class HasInDatabase

The database connection.

$ HasInDatabase#dataProperty in class HasInDatabase

The data that will be used to narrow the search in the database table.

$ NotSoftDeletedInDatabase#databaseProperty in class NotSoftDeletedInDatabase

The database connection.

$ NotSoftDeletedInDatabase#dataProperty in class NotSoftDeletedInDatabase

The data that will be used to narrow the search in the database table.

$ NotSoftDeletedInDatabase#deletedAtColumnProperty in class NotSoftDeletedInDatabase

The name of the column that indicates soft deletion has occurred.

$ SoftDeletedInDatabase#databaseProperty in class SoftDeletedInDatabase

The database connection.

$ SoftDeletedInDatabase#dataProperty in class SoftDeletedInDatabase

The data that will be used to narrow the search in the database table.

$ SoftDeletedInDatabase#deletedAtColumnProperty in class SoftDeletedInDatabase

The name of the column that indicates soft deletion has occurred.

AssertableJson::dotPath() — Method in class AssertableJson

Compose the absolute "dot" path to the given key.

DebuggingClass in namespace Illuminate\Testing\Fluent\Concerns
Debugging::dump() — Method in class Debugging

Dumps the given props.

Debugging::dd() — Method in class Debugging

Dumps the given props and exits.

Has::dotPath() — Method in class Has

Compose the absolute "dot" path to the given key.

Matching::dotPath() — Method in class Matching

Compose the absolute "dot" path to the given key.

PendingCommand::doesntExpectOutput() — Method in class PendingCommand

Specify output that should never be printed when the command runs.

PendingCommand::doesntExpectOutputToContain() — Method in class PendingCommand

Specify that the given string shouldn't be contained in the command output.

TestResponse::decodeResponseJson() — Method in class TestResponse

Validate and return the decoded response JSON.

TestResponse::dd() — Method in class TestResponse

Dump the content from the response and end the script.

TestResponse::ddHeaders() — Method in class TestResponse

Dump the headers from the response and end the script.

TestResponse::ddSession() — Method in class TestResponse

Dump the session from the response and end the script.

TestResponse::dump() — Method in class TestResponse

Dump the content from the response.

TestResponse::dumpHeaders() — Method in class TestResponse

Dump the headers from the response.

TestResponse::dumpSession() — Method in class TestResponse

Dump the session from the response.

$ Translator#determineLocalesUsingProperty in class Translator

The callable that should be invoked to determine applicable locales.

Translator::determineLocalesUsing() — Method in class Translator

Specify a callback that should be invoked to determined the applicable locale array.

$ ClosureValidationRule#destructorProperty in class ClosureValidationRule

The callback to call when the object destructs.

$ ConditionalRules#defaultRulesProperty in class ConditionalRules

The rules to be added to the attribute if the condition fails.

ConditionalRules::defaultRules() — Method in class ConditionalRules

Get the default rules.

DatabasePresenceVerifierClass in namespace Illuminate\Validation
$ DatabasePresenceVerifier#dbProperty in class DatabasePresenceVerifier

The database connection instance.

DatabasePresenceVerifierInterfaceClass in namespace Illuminate\Validation
$ Factory#dependentExtensionsProperty in class Factory

All of the custom dependent validator extensions.

$ InvokableValidationRule#dataProperty in class InvokableValidationRule

The data under validation.

Rule::dimensions() — Method in class Rule

Get a dimensions constraint builder instance.

DatabaseRuleClass in namespace Illuminate\Validation\Rules
DimensionsClass in namespace Illuminate\Validation\Rules
$ File#dataProperty in class File

The data under validation.

$ File#defaultCallbackProperty in class File

The callback that will generate the "default" version of the file rule.

File::defaults() — Method in class File

Set the default callback to be used for determining the file default rules.

File::default() — Method in class File

Get the default configuration of the file rule.

ImageFile::dimensions() — Method in class ImageFile

The dimension constraints for the uploaded file.

$ Password#dataProperty in class Password

The data under validation.

$ Password#defaultCallbackProperty in class Password

The callback that will generate the "default" version of the password rule.

Password::defaults() — Method in class Password

Set the default callback to be used for determining a password's default rules.

Password::default() — Method in class Password

Get the default configuration of the password rule.

$ ValidationRuleParser#dataProperty in class ValidationRuleParser

The data being validated.

$ Validator#dataProperty in class Validator

The data under validation.

$ Validator#distinctValuesProperty in class Validator

The cached data for the "distinct" rule.

$ Validator#dependentRulesProperty in class Validator

The validation rules which depend on other fields as parameters.

$ Validator#dotPlaceholderProperty in class Validator

The current placeholder for dots in rule keys.

Validator::dependsOnOtherFields() — Method in class Validator

Determine if the given rule depends on other fields.

$ AnonymousComponent#dataProperty in class AnonymousComponent

The component data.

AnonymousComponent::data() — Method in class AnonymousComponent

Get the data that should be supplied to the view.

Component::data() — Method in class Component

Get the data that should be supplied to the view.

DynamicComponentClass in namespace Illuminate\View
Factory::decrementRender() — Method in class Factory

Decrement the rendering counter.

Factory::doneRendering() — Method in class Factory

Check if there are no active render operations.

$ View#dataProperty in class View

The array of view data.

E

AuthManager::extend() — Method in class AuthManager

Register a custom driver creator Closure.

EloquentUserProviderClass in namespace Illuminate\Auth
EnsureEmailIsVerifiedClass in namespace Illuminate\Auth\Middleware
$ DatabaseTokenRepository#expiresProperty in class DatabaseTokenRepository

The number of seconds a token should last.

DatabaseTokenRepository::exists() — Method in class DatabaseTokenRepository

Determine if a token record exists and is valid.

TokenRepositoryInterface::exists() — Method in class TokenRepositoryInterface

Determine if a token record exists and is valid.

$ SessionGuard#eventsProperty in class SessionGuard

The event dispatcher instance.

SessionGuard::ensureRememberTokenIsSet() — Method in class SessionGuard

Create a new "remember me" token for the user if one doesn't already exist.

$ BroadcastEvent#eventProperty in class BroadcastEvent

The event instance.

BroadcastManager::event() — Method in class BroadcastManager

Begin broadcasting an event.

BroadcastManager::extend() — Method in class BroadcastManager

Register a custom driver creator Closure.

Broadcaster::extractAuthParameters() — Method in class Broadcaster

Extract the parameters from the given pattern and channel.

Broadcaster::extractParameters() — Method in class Broadcaster

Extracts the parameters out of what the user passed to handle the channel authentication.

Broadcaster::extractParametersFromClass() — Method in class Broadcaster

Extracts the parameters out of a class channel's "join" method.

Broadcaster::extractChannelKeys() — Method in class Broadcaster

Extract the channel keys from the incoming channel name.

EncryptedPrivateChannelClass in namespace Illuminate\Broadcasting
$ PendingBroadcast#eventsProperty in class PendingBroadcast

The event dispatcher implementation.

$ PendingBroadcast#eventProperty in class PendingBroadcast

The event instance.

ArrayLock::exists() — Method in class ArrayLock

Determine if the current lock exists.

CacheManager::extend() — Method in class CacheManager

Register a custom driver creator Closure.

DatabaseLock::expiresAt() — Method in class DatabaseLock

Get the UNIX timestamp indicating when the lock should expire.

$ DynamoDbStore#expirationAttributeProperty in class DynamoDbStore

The name of the attribute that should hold the expiration timestamp.

FileStore::ensureCacheDirectoryExists() — Method in class FileStore

Create the file cache directory if necessary.

FileStore::ensurePermissionsAreCorrect() — Method in class FileStore

Ensure the created node has the correct permissions.

FileStore::emptyPayload() — Method in class FileStore

Get a default empty payload for the cache.

FileStore::expiration() — Method in class FileStore

Get the expiration time based on the given seconds.

RedisTagSet::entries() — Method in class RedisTagSet

Get all of the cache entry keys for the tag set.

$ Repository#eventsProperty in class Repository

The event dispatcher implementation.

Repository::event() — Method in class Repository

Fire an event for this cache instance.

TaggedCache::event() — Method in class TaggedCache

Fire an event for this cache instance.

$ Application#eventsProperty in class Application

The event dispatcher instance.

CacheCommandMutex::exists() — Method in class CacheCommandMutex

Determine if a command mutex exists for the given command.

Command::execute() — Method in class Command

Execute the console command.

CommandMutex::exists() — Method in class CommandMutex

Determine if a command mutex exists for the given command.

InteractsWithIO::error() — Method in class InteractsWithIO

Write a string as error output.

$ CommandFinished#exitCodeProperty in class CommandFinished

The command exit code.

$ ScheduledTaskFailed#exceptionProperty in class ScheduledTaskFailed

The exception that was thrown.

Parser::extractDescription() — Method in class Parser

Parse the token into its token and description segments.

QuestionHelper::ensureEndsWithPunctuation() — Method in class QuestionHelper

Ensures the given string ends with punctuation.

CacheEventMutex::exists() — Method in class CacheEventMutex

Determine if an event mutex exists for the given event.

CacheSchedulingMutex::exists() — Method in class CacheSchedulingMutex

Determine if a scheduling mutex exists for the given event.

$ CallbackEvent#exceptionProperty in class CallbackEvent

The exception that was thrown when calling the callback, if any.

CallbackEvent::execute() — Method in class CallbackEvent

Run the callback.

CommandBuilder::ensureCorrectUser() — Method in class CommandBuilder

Finalize the event's command syntax with the correct user.

EventClass in namespace Illuminate\Console\Scheduling
$ Event#expressionProperty in class Event

The cron expression representing the event's frequency.

$ Event#environmentsProperty in class Event

The list of environments the command should run under.

$ Event#evenInMaintenanceModeProperty in class Event

Indicates if the command should run in maintenance mode.

$ Event#expiresAtProperty in class Event

The number of minutes the mutex should be valid.

$ Event#exitCodeProperty in class Event

The exit status code of the command.

Event::execute() — Method in class Event

Run the command process.

Event::expressionPasses() — Method in class Event

Determine if the Cron expression passes.

Event::emailOutputTo() — Method in class Event

E-mail the results of the scheduled operation.

Event::emailWrittenOutputTo() — Method in class Event

E-mail the results of the scheduled operation if it produces output.

Event::emailOutputOnFailure() — Method in class Event

E-mail the results of the scheduled operation if it fails.

Event::ensureOutputIsBeingCaptured() — Method in class Event

Ensure that the command output is being captured.

Event::emailOutput() — Method in class Event

E-mail the output of the event to the recipients.

Event::environments() — Method in class Event

Limit the environments the command should run in.

Event::evenInMaintenanceMode() — Method in class Event

State that the command should run even in maintenance mode.

EventMutexClass in namespace Illuminate\Console\Scheduling
EventMutex::exists() — Method in class EventMutex

Determine if an event mutex exists for the given event.

ManagesFrequencies::everyMinute() — Method in class ManagesFrequencies

Schedule the event to run every minute.

ManagesFrequencies::everyTwoMinutes() — Method in class ManagesFrequencies

Schedule the event to run every two minutes.

ManagesFrequencies::everyThreeMinutes() — Method in class ManagesFrequencies

Schedule the event to run every three minutes.

ManagesFrequencies::everyFourMinutes() — Method in class ManagesFrequencies

Schedule the event to run every four minutes.

ManagesFrequencies::everyFiveMinutes() — Method in class ManagesFrequencies

Schedule the event to run every five minutes.

ManagesFrequencies::everyTenMinutes() — Method in class ManagesFrequencies

Schedule the event to run every ten minutes.

ManagesFrequencies::everyFifteenMinutes() — Method in class ManagesFrequencies

Schedule the event to run every fifteen minutes.

ManagesFrequencies::everyThirtyMinutes() — Method in class ManagesFrequencies

Schedule the event to run every thirty minutes.

ManagesFrequencies::everyOddHour() — Method in class ManagesFrequencies

Schedule the event to run every odd hour.

ManagesFrequencies::everyTwoHours() — Method in class ManagesFrequencies

Schedule the event to run every two hours.

ManagesFrequencies::everyThreeHours() — Method in class ManagesFrequencies

Schedule the event to run every three hours.

ManagesFrequencies::everyFourHours() — Method in class ManagesFrequencies

Schedule the event to run every four hours.

ManagesFrequencies::everySixHours() — Method in class ManagesFrequencies

Schedule the event to run every six hours.

$ Schedule#eventsProperty in class Schedule

All of the events on the schedule.

$ Schedule#eventMutexProperty in class Schedule

The event mutex implementation.

Schedule::exec() — Method in class Schedule

Add a new command event to the schedule.

Schedule::events() — Method in class Schedule

Get all of the events on the schedule.

$ ScheduleRunCommand#eventsRanProperty in class ScheduleRunCommand

Check if any events ran.

SchedulingMutex::exists() — Method in class SchedulingMutex

Determine if a scheduling mutex exists for the given event.

ErrorClass in namespace Illuminate\Console\View\Components
Factory::error() — Method in class Factory
EnsureDynamicContentIsHighlightedClass in namespace Illuminate\Console\View\Components\Mutators
EnsureNoPunctuationClass in namespace Illuminate\Console\View\Components\Mutators
EnsurePunctuationClass in namespace Illuminate\Console\View\Components\Mutators
EnsureRelativePathsClass in namespace Illuminate\Console\View\Components\Mutators
$ Container#extendersProperty in class Container

The extension closures for services.

Container::extend() — Method in class Container

"Extend" an abstract type in the container.

EntryNotFoundExceptionClass in namespace Illuminate\Container
Container::extend() — Method in class Container

"Extend" an abstract type in the container.

ExpressionClass in namespace Illuminate\Contracts\Database\Query
ExceptionHandlerClass in namespace Illuminate\Contracts\Debug
EncryptExceptionClass in namespace Illuminate\Contracts\Encryption
EncrypterClass in namespace Illuminate\Contracts\Encryption
Encrypter::encrypt() — Method in class Encrypter

Encrypt the given value.

StringEncrypter::encryptString() — Method in class StringEncrypter

Encrypt a string without serialization.

Filesystem::exists() — Method in class Filesystem

Determine if a file exists.

Application::environment() — Method in class Application

Get or check the current application environment.

ExceptionRendererClass in namespace Illuminate\Contracts\Foundation
InvokedProcess::errorOutput() — Method in class InvokedProcess

Get the error output for the process.

ProcessResult::exitCode() — Method in class ProcessResult

Get the exit code of the process.

ProcessResult::errorOutput() — Method in class ProcessResult

Get the error output of the process.

EntityNotFoundExceptionClass in namespace Illuminate\Contracts\Queue
EntityResolverClass in namespace Illuminate\Contracts\Queue
Session::exists() — Method in class Session

Checks if a key exists.

CanBeEscapedWhenCastToString::escapeWhenCastingToString() — Method in class CanBeEscapedWhenCastToString

Indicate that the object's string representation should be escaped when __toString is invoked.

Factory::extend() — Method in class Factory

Register a custom validator extension.

Factory::extendImplicit() — Method in class Factory

Register a custom implicit validator extension.

Validator::errors() — Method in class Validator

Get all of the validation error messages.

EngineClass in namespace Illuminate\Contracts\View
Factory::exists() — Method in class Factory

Determine if a given view exists.

CookieJar::expire() — Method in class CookieJar

Queue a cookie to expire with the next response.

EncryptCookiesClass in namespace Illuminate\Cookie\Middleware
$ EncryptCookies#encrypterProperty in class EncryptCookies

The encrypter instance.

$ EncryptCookies#exceptProperty in class EncryptCookies

The names of the cookies that should not be encrypted.

EncryptCookies::encrypt() — Method in class EncryptCookies

Encrypt the cookies on an outgoing response.

BuildsQueries::each() — Method in class BuildsQueries

Execute a callback over each item while chunking.

BuildsQueries::eachById() — Method in class BuildsQueries

Execute a callback over each item while chunking by ID.

ExplainsQueriesClass in namespace Illuminate\Database\Concerns
ExplainsQueries::explain() — Method in class ExplainsQueries

Explains the query.

$ Connection#eventsProperty in class Connection

The event dispatcher instance.

Connection::event() — Method in class Connection

Fire the given event if possible.

Connection::enableQueryLog() — Method in class Connection

Enable the query log on the connection.

DatabaseInspectionCommand::ensureDependenciesExist() — Method in class DatabaseInspectionCommand

Ensure the dependencies for the database commands are available.

$ MonitorCommand#eventsProperty in class MonitorCommand

The events dispatcher instance.

$ DatabaseManager#extensionsProperty in class DatabaseManager

The custom connection resolvers.

DatabaseManager::extend() — Method in class DatabaseManager

Register an extension connection resolver.

DatabaseTransactionRecord::executeCallbacks() — Method in class DatabaseTransactionRecord

Execute all of the callbacks.

$ BroadcastableModelEventOccurred#eventProperty in class BroadcastableModelEventOccurred

The event name (created, updated, etc.).

BroadcastableModelEventOccurred::event() — Method in class BroadcastableModelEventOccurred

Get the event name.

$ Builder#eagerLoadProperty in class Builder

The relationships that should be eager loaded.

Builder::eagerLoadRelations() — Method in class Builder

Eager load the relationships for the models.

Builder::eagerLoadRelation() — Method in class Builder

Eagerly load the relationship on a set of models.

Builder::enforceOrderBy() — Method in class Builder

Add a generic "order by" clause if the query doesn't already have one.

Builder::ensureOrderForCursorPagination() — Method in class Builder

Ensure the proper order by required for cursor pagination.

Collection::except() — Method in class Collection
$ HasAttributes#encrypterProperty in class HasAttributes

The encrypter instance that is used to encrypt attributes.

HasAttributes::encryptUsing() — Method in class HasAttributes

Set the encrypter instance that will be used to encrypt attributes.

Factory::expandAttributes() — Method in class Factory

Expand all attributes to their underlying values.

$ Model#existsProperty in class Model

Indicates if the model exists.

$ Model#escapeWhenCastingToStringProperty in class Model

Indicates that the object's string representation should be escaped when __toString is invoked.

Model::escapeWhenCastingToString() — Method in class Model

Indicate that the object's string representation should be escaped when __toString is invoked.

BelongsToMany::each() — Method in class BelongsToMany

Execute a callback over each item while chunking.

InteractsWithPivotTable::extractAttachIdAndAttributes() — Method in class InteractsWithPivotTable

Get the attach record ID and extra attributes.

HasManyThrough::each() — Method in class HasManyThrough

Execute a callback over each item while chunking.

$ Relation#eagerKeysWereEmptyProperty in class Relation

Indicates whether the eagerly loaded relation should implicitly return an empty collection.

Relation::enforceMorphMap() — Method in class Relation

Define the morph map for polymorphic relations and require all morphed models to be explicitly mapped.

$ SoftDeletingScope#extensionsProperty in class SoftDeletingScope

All of the extensions to be added to the builder.

SoftDeletingScope::extend() — Method in class SoftDeletingScope

Extend the query builder with the needed functions.

MigrationCreator::ensureMigrationDoesntAlreadyExist() — Method in class MigrationCreator

Ensure that a migration with the given name doesn't already exist.

$ Migrator#eventsProperty in class Migrator

The event dispatcher instance.

Connection::exec() — Method in class Connection

Execute an SQL statement.

SqlServerConnection::exec() — Method in class SqlServerConnection

Execute an SQL statement.

Builder::ensureOrderForCursorPagination() — Method in class Builder

Ensure the proper order by required for cursor pagination.

Builder::enforceOrderBy() — Method in class Builder

Throw an exception if the query doesn't have an orderBy clause.

Builder::exists() — Method in class Builder

Determine if any rows exist for the current query.

Builder::existsOr() — Method in class Builder

Execute the given callback if no rows exist for the current query.

ExpressionClass in namespace Illuminate\Database\Query
$ Blueprint#engineProperty in class Blueprint

The storage engine that should be used for the table.

Blueprint::ensureCommandsAreValid() — Method in class Blueprint

Ensure the commands on the blueprint are valid for the connection type.

Blueprint::enum() — Method in class Blueprint

Create a new enum column on the table.

Builder::enableForeignKeyConstraints() — Method in class Builder

Enable foreign key constraints.

PostgresGrammar::escapeNames() — Method in class PostgresGrammar

Quote-escape the given tables, views, or types.

MySqlSchemaState::executeDumpProcess() — Method in class MySqlSchemaState

Execute the given dump process.

EncrypterClass in namespace Illuminate\Encryption
Encrypter::encrypt() — Method in class Encrypter

Encrypt the given value.

Encrypter::encryptString() — Method in class Encrypter

Encrypt a string without serialization.

Encrypter::ensureTagIsValid() — Method in class Encrypter

Ensure the given tag is a valid tag given the selected cipher.

EncryptionServiceProviderClass in namespace Illuminate\Encryption
EventServiceProviderClass in namespace Illuminate\Events
Filesystem::exists() — Method in class Filesystem

Determine if a file or directory exists.

Filesystem::extension() — Method in class Filesystem

Extract the file extension from a file path.

Filesystem::ensureDirectoryExists() — Method in class Filesystem

Ensure a directory exists.

FilesystemAdapter::exists() — Method in class FilesystemAdapter

Determine if a file or directory exists.

FilesystemManager::extend() — Method in class FilesystemManager

Register a custom driver creator Closure.

LockableFile::ensureDirectoryExists() — Method in class LockableFile

Create the file's directory if necessary.

AliasLoader::ensureFacadeExists() — Method in class AliasLoader

Ensure that the given alias has an existing real-time facade class.

$ Application#environmentPathProperty in class Application

The custom environment path defined by the developer.

$ Application#environmentFileProperty in class Application

The environment file to load during bootstrapping.

Application::environmentPath() — Method in class Application

Get the path to the environment file directory.

Application::environmentFile() — Method in class Application

Get the environment file the application is using.

Application::environmentFilePath() — Method in class Application

Get the fully qualified path to the environment file.

Application::environment() — Method in class Application

Get or check the current application environment.

Application::eventsAreCached() — Method in class Application

Determine if the application events are cached.

EmailVerificationRequestClass in namespace Illuminate\Foundation\Auth
HandleExceptions::ensureDeprecationLoggerIsConfigured() — Method in class HandleExceptions

Ensure the "deprecations" logger is configured.

HandleExceptions::ensureNullLogDriverIsConfigured() — Method in class HandleExceptions

Ensure the "null" log driver is configured.

$ ResolvesDumpSource#editorHrefsProperty in class ResolvesDumpSource

All of the href formats for common editors.

ClosureCommand::execute() — Method in class ClosureCommand

Execute the console command.

DownCommand::excludedPaths() — Method in class DownCommand

Get the paths that should be excluded from maintenance mode.

EnvironmentCommandClass in namespace Illuminate\Foundation\Console
EnvironmentDecryptCommandClass in namespace Illuminate\Foundation\Console
EnvironmentEncryptCommandClass in namespace Illuminate\Foundation\Console
EventCacheCommandClass in namespace Illuminate\Foundation\Console
EventClearCommandClass in namespace Illuminate\Foundation\Console
EventGenerateCommandClass in namespace Illuminate\Foundation\Console
EventListCommandClass in namespace Illuminate\Foundation\Console
$ EventListCommand#eventsResolverProperty in class EventListCommand

The events dispatcher resolver callback.

EventMakeCommandClass in namespace Illuminate\Foundation\Console
ExceptionMakeCommandClass in namespace Illuminate\Foundation\Console
$ Kernel#eventsProperty in class Kernel

The event dispatcher implementation.

EnvironmentDetectorClass in namespace Illuminate\Foundation
$ Handler#exceptionMapProperty in class Handler

The registered exception mappings.

Handler::exceptionContext() — Method in class Handler

Get the default exception context variables for logging.

$ FormRequest#errorBagProperty in class FormRequest

The key to be used for the view error bag.

$ PreventRequestsDuringMaintenance#exceptProperty in class PreventRequestsDuringMaintenance

The URIs that should be accessible while maintenance mode is enabled.

$ TrimStrings#exceptProperty in class TrimStrings

The attributes that should not be trimmed.

$ VerifyCsrfToken#encrypterProperty in class VerifyCsrfToken

The encrypter implementation.

$ VerifyCsrfToken#exceptProperty in class VerifyCsrfToken

The URIs that should be excluded from CSRF verification.

PrecognitionControllerDispatcher::ensureMethodExists() — Method in class PrecognitionControllerDispatcher

Ensure that the given method exists on the controller.

EventServiceProviderClass in namespace Illuminate\Foundation\Support\Providers
EventServiceProvider::eventDiscoveryBasePath() — Method in class EventServiceProvider

Get the base path to be used during event discovery.

$ InteractsWithConsole#expectedOutputProperty in class InteractsWithConsole

All of the expected output lines.

$ InteractsWithConsole#expectedOutputSubstringsProperty in class InteractsWithConsole

All of the expected text to be present in the output.

$ InteractsWithConsole#expectedTablesProperty in class InteractsWithConsole

All of the expected output tables.

$ InteractsWithConsole#expectedQuestionsProperty in class InteractsWithConsole

All of the expected questions.

$ InteractsWithConsole#expectedChoicesProperty in class InteractsWithConsole

All of the expected choice questions.

InteractsWithDatabase::expectsDatabaseQueryCount() — Method in class InteractsWithDatabase

Specify the number of database queries that should occur throughout the test.

$ InteractsWithExceptionHandling#exceptProperty in class InteractsWithExceptionHandling
$ MakesHttpRequests#encryptCookiesProperty in class MakesHttpRequests

Indicates whether cookies should be encrypted.

DatabaseTruncation::exceptTables() — Method in class DatabaseTruncation

Get the tables that should not be truncated.

$ Vite#entryPointsProperty in class Vite

The configured entry points.

PendingRequest::expandUrlParameters() — Method in class PendingRequest

Substitute the URL parameters in the given URL.

Response::effectiveUri() — Method in class Response

Get the effective URI of the response.

$ ResponseSequence#emptyResponseProperty in class ResponseSequence

The response that should be returned when the sequence is empty.

InteractsWithContentTypes::expectsJson() — Method in class InteractsWithContentTypes

Determine if the current request probably expects a JSON response.

InteractsWithInput::exists() — Method in class InteractsWithInput

Determine if the request contains a given input item key.

InteractsWithInput::enum() — Method in class InteractsWithInput

Retrieve input from the request as an enum.

InteractsWithInput::except() — Method in class InteractsWithInput

Get all of the input except for a specified array of items.

FileHelpers::extension() — Method in class FileHelpers

Get the file's extension.

RedirectResponse::exceptInput() — Method in class RedirectResponse

Flash an array of input to the session.

$ ResponseTrait#exceptionProperty in class ResponseTrait

The exception that triggered the error response (if applicable).

LogManager::extend() — Method in class LogManager

Register a custom driver creator Closure.

LogManager::emergency() — Method in class LogManager

System is unusable.

LogManager::error() — Method in class LogManager

Runtime errors that do not require immediate action but should typically be logged and monitored.

Logger::emergency() — Method in class Logger

Log an emergency message to the logs.

Logger::error() — Method in class Logger

Log an error message to the logs.

MailManager::extend() — Method in class MailManager

Register a custom transport creator Closure.

EnvelopeClass in namespace Illuminate\Mail\Mailables
$ Mailer#eventsProperty in class Mailer

The event dispatcher instance.

$ Message#embeddedFilesProperty in class Message

CIDs of files embedded in the message.

Message::embed() — Method in class Message

Embed a file in the message and get the CID.

Message::embedData() — Method in class Message

Embed in-memory data in the message and get the CID.

$ BroadcastChannel#eventsProperty in class BroadcastChannel

The event dispatcher.

SimpleMessage::error() — Method in class SimpleMessage

Indicate that the notification gives information about an error.

$ NotificationSender#eventsProperty in class NotificationSender

The event dispatcher.

AbstractCursorPaginator::ensureParameterIsPrimitive() — Method in class AbstractCursorPaginator

Ensure the parameter is a primitive type.

Cursor::encode() — Method in class Cursor

Get the encoded string representation of the cursor to construct a URL.

LengthAwarePaginator::elements() — Method in class LengthAwarePaginator

Get the array of elements to pass to the view.

FakeInvokedProcess::errorOutput() — Method in class FakeInvokedProcess

Get the error output for the process.

$ FakeProcessDescription#exitCodeProperty in class FakeProcessDescription

The process' exit code.

FakeProcessDescription::errorOutput() — Method in class FakeProcessDescription

Describe a line of error output.

FakeProcessDescription::exitCode() — Method in class FakeProcessDescription

Specify the process exit code.

$ FakeProcessResult#exitCodeProperty in class FakeProcessResult

The process exit code.

$ FakeProcessResult#errorOutputProperty in class FakeProcessResult

The process error output.

FakeProcessResult::exitCode() — Method in class FakeProcessResult

Get the exit code of the process.

FakeProcessResult::errorOutput() — Method in class FakeProcessResult

Get the error output of the process.

$ FakeProcessSequence#emptyProcessProperty in class FakeProcessSequence

The response that should be returned when the sequence is empty.

InvokedProcess::errorOutput() — Method in class InvokedProcess

Get the error output for the process.

$ PendingProcess#environmentProperty in class PendingProcess

The additional environment variables for the process.

PendingProcess::env() — Method in class PendingProcess

Set the additional environent variables for the process.

ProcessResult::exitCode() — Method in class ProcessResult

Get the exit code of the process.

ProcessResult::errorOutput() — Method in class ProcessResult

Get the error output of the process.

CallQueuedHandler::ensureNextJobInChainIsDispatched() — Method in class CallQueuedHandler

Ensure the next job in the chain is dispatched if applicable.

CallQueuedHandler::ensureSuccessfulBatchJobIsRecorded() — Method in class CallQueuedHandler

Ensure the batch is notified of the successful job completion.

CallQueuedHandler::ensureUniqueJobLockIsReleased() — Method in class CallQueuedHandler

Ensure the lock for a unique job is released.

CallQueuedHandler::ensureFailedBatchJobIsRecorded() — Method in class CallQueuedHandler

Ensure the batch is notified of the failed job.

CallQueuedHandler::ensureChainCatchCallbacksAreInvoked() — Method in class CallQueuedHandler

Ensure the chained job catch callbacks are invoked.

$ MonitorCommand#eventsProperty in class MonitorCommand

The events dispatcher instance.

$ JobExceptionOccurred#exceptionProperty in class JobExceptionOccurred

The exception instance.

$ JobFailed#exceptionProperty in class JobFailed

The exception that caused the job to fail.

$ Listener#environmentProperty in class Listener

The environment the workers should run under.

$ ListenerOptions#environmentProperty in class ListenerOptions

The environment the worker should run in.

$ WithoutOverlapping#expiresAfterProperty in class WithoutOverlapping

The number of seconds before the lock should expire.

WithoutOverlapping::expireAfter() — Method in class WithoutOverlapping

Set the maximum number of seconds that can elapse before the lock is released.

Queue::enqueueUsing() — Method in class Queue

Enqueue a job using the given callback.

QueueManager::exceptionOccurred() — Method in class QueueManager

Register an event listener for the exception occurred job event.

QueueManager::extend() — Method in class QueueManager

Add a queue connection resolver.

$ Worker#eventsProperty in class Worker

The event dispatcher instance.

$ Worker#exceptionsProperty in class Worker

The exception handler instance.

$ Connection#eventsProperty in class Connection

The event dispatcher instance.

Connection::event() — Method in class Connection

Fire the given event if possible.

PhpRedisConnection::evalsha() — Method in class PhpRedisConnection

Evaluate a LUA script serverside, from the SHA1 hash of the script instead of the script itself.

PhpRedisConnection::eval() — Method in class PhpRedisConnection

Evaluate a script and return its result.

PhpRedisConnection::executeRaw() — Method in class PhpRedisConnection

Execute a raw command.

PhpRedisConnector::establishConnection() — Method in class PhpRedisConnector

Establish a connection with the Redis host.

DurationLimiterBuilder::every() — Method in class DurationLimiterBuilder

Set the amount of time the lock window is maintained.

$ RedisManager#eventsProperty in class RedisManager

Indicates whether event dispatcher is set on connections.

RedisManager::enableEvents() — Method in class RedisManager

Enable the firing of Redis command events.

RedisManager::extend() — Method in class RedisManager

Register a custom driver creator Closure.

ControllerMiddlewareOptions::except() — Method in class ControllerMiddlewareOptions

Set the controller methods the middleware should exclude.

$ Middleware#exceptProperty in class Middleware

The controller methods the middleware should not apply to.

Middleware::except() — Method in class Middleware

Specify the controller methods the middleware should not apply to.

PendingResourceRegistration::except() — Method in class PendingResourceRegistration

Set the methods the controller should exclude.

PendingSingletonResourceRegistration::except() — Method in class PendingSingletonResourceRegistration

Set the methods the controller should exclude.

Route::excludedMiddleware() — Method in class Route

Get the middleware should be removed from the route.

Route::enforcesScopedBindings() — Method in class Route

Determine if the route should enforce scoping of multiple implicit Eloquent bindings.

$ Router#eventsProperty in class Router

The event dispatcher instance.

UrlGenerator::ensureSignedRouteParametersAreNotReserved() — Method in class UrlGenerator

Ensure the given signed route parameters are not reserved.

UrlGenerator::extractQueryString() — Method in class UrlGenerator

Extract the query string from the given path.

$ CookieSessionHandler#expireOnCloseProperty in class CookieSessionHandler

Indicates whether the session should be expired when the browser closes.

$ DatabaseSessionHandler#existsProperty in class DatabaseSessionHandler

The existence state of the session.

DatabaseSessionHandler::expired() — Method in class DatabaseSessionHandler

Determine if the session is expired.

EncryptedStoreClass in namespace Illuminate\Session
$ EncryptedStore#encrypterProperty in class EncryptedStore

The encrypter instance.

ExistenceAwareInterfaceClass in namespace Illuminate\Session
Store::exists() — Method in class Store

Checks if a key exists.

Arr::except() — Method in class Arr

Get all of the given array except for a specified array of keys.

Arr::exists() — Method in class Arr

Determine if the given key exists in the provided array.

Arr::explodePluckParameters() — Method in class Arr

Explode the "value" and "key" arguments passed to "pluck".

Collection::except() — Method in class Collection

Get all items except for those with the specified keys.

DateFactory::enableHumanDiffOption() — Method in class DateFactory
DateFactory::executeWithLocale() — Method in class DateFactory
EnumerableClass in namespace Illuminate\Support
Enumerable::empty() — Method in class Enumerable

Create a new instance with no items.

Enumerable::each() — Method in class Enumerable

Execute a callback over each item.

Enumerable::eachSpread() — Method in class Enumerable

Execute a callback over each nested chunk of items.

Enumerable::every() — Method in class Enumerable

Determine if all items pass the given truth test.

Enumerable::except() — Method in class Enumerable

Get all items except for those with the specified keys.

Enumerable::escapeWhenCastingToString() — Method in class Enumerable

Indicate that the model's string representation should be escaped when __toString is invoked.

EnvClass in namespace Illuminate\Support
Env::enablePutenv() — Method in class Env

Enable the putenv adapter.

App::environmentPath() — Method in class App
App::environmentFile() — Method in class App
App::environmentFilePath() — Method in class App
App::environment() — Method in class App
App::eventsAreCached() — Method in class App
App::extend() — Method in class App
Auth::extend() — Method in class Auth
Blade::extend() — Method in class Blade
Broadcast::event() — Method in class Broadcast
Broadcast::extend() — Method in class Broadcast
Bus::except() — Method in class Bus
Cache::extend() — Method in class Cache
Cookie::expire() — Method in class Cookie
Crypt::encrypt() — Method in class Crypt
Crypt::encryptString() — Method in class Crypt
DB::extend() — Method in class DB
DB::enableQueryLog() — Method in class DB
Date::enableHumanDiffOption() — Method in class Date
Date::executeWithLocale() — Method in class Date
EventClass in namespace Illuminate\Support\Facades
Event::except() — Method in class Event
Facade::expects() — Method in class Facade

Initiate a mock expectation on the facade.

File::exists() — Method in class File
File::extension() — Method in class File
File::ensureDirectoryExists() — Method in class File
Hash::extend() — Method in class Hash
Log::extend() — Method in class Log
Log::emergency() — Method in class Log
Log::error() — Method in class Log
Mail::extend() — Method in class Mail
Notification::extend() — Method in class Notification
Process::env() — Method in class Process
Queue::exceptionOccurred() — Method in class Queue
Queue::extend() — Method in class Queue
Queue::except() — Method in class Queue
Redis::enableEvents() — Method in class Redis
Redis::extend() — Method in class Redis
Request::enableHttpMethodParameterOverride() — Method in class Request
Request::expectsJson() — Method in class Request
Request::exists() — Method in class Request
Request::enum() — Method in class Request
Request::except() — Method in class Request
Schema::enableForeignKeyConstraints() — Method in class Schema
Session::extend() — Method in class Session
Session::exists() — Method in class Session
Storage::extend() — Method in class Storage
Storage::exists() — Method in class Storage
Validator::extend() — Method in class Validator
Validator::extendImplicit() — Method in class Validator
Validator::extendDependent() — Method in class Validator
Validator::excludeUnvalidatedArrayKeys() — Method in class Validator
View::exists() — Method in class View
View::endSlot() — Method in class View
LazyCollection::eager() — Method in class LazyCollection

Eager load all items into a new lazy collection backed by an array.

LazyCollection::except() — Method in class LazyCollection

Get all items except for those with the specified keys.

LazyCollection::explodePluckParameters() — Method in class LazyCollection

Explode the "value" and "key" arguments passed to "pluck".

Manager::extend() — Method in class Manager

Register a custom driver creator Closure.

MultipleInstanceManager::extend() — Method in class MultipleInstanceManager

Register a custom instance creator Closure.

ProcessUtils::escapeArgument() — Method in class ProcessUtils

Escapes a string to be used as a shell argument.

ServiceProvider::ensurePublishArrayInitialized() — Method in class ServiceProvider

Ensure the publish array for the service provider is initialized.

Str::endsWith() — Method in class Str

Determine if a given string ends with a given substring.

Str::excerpt() — Method in class Str

Extracts an excerpt from text that matches the first instance of a phrase.

Stringable::endsWith() — Method in class Stringable

Determine if a given string ends with a given substring.

Stringable::exactly() — Method in class Stringable

Determine if the string is an exact match with the given value.

Stringable::excerpt() — Method in class Stringable

Extracts an excerpt from text that matches the first instance of a phrase.

Stringable::explode() — Method in class Stringable

Explode the string into an array.

BusFake::except() — Method in class BusFake

Specify the jobs that should be dispatched instead of faked.

EventFakeClass in namespace Illuminate\Support\Testing\Fakes
$ EventFake#eventsToFakeProperty in class EventFake

The event types that should be intercepted instead of dispatched.

$ EventFake#eventsToDispatchProperty in class EventFake

The event types that should be dispatched instead of intercepted.

$ EventFake#eventsProperty in class EventFake

All of the events that have been intercepted keyed by type.

EventFake::except() — Method in class EventFake

Specify the events that should be dispatched instead of faked.

QueueFake::except() — Method in class QueueFake

Specify the jobs that should be queued instead of faked.

$ Timebox#earlyReturnProperty in class Timebox

Indicates if the timebox is allowed to return early.

EnumeratesValuesClass in namespace Illuminate\Support\Traits
$ EnumeratesValues#escapeWhenCastingToStringProperty in class EnumeratesValues

Indicates that the object's string representation should be escaped when __toString is invoked.

$ EnumeratesValues#eachProperty in class EnumeratesValues
$ EnumeratesValues#everyProperty in class EnumeratesValues
EnumeratesValues::empty() — Method in class EnumeratesValues

Create a new instance with no items.

EnumeratesValues::each() — Method in class EnumeratesValues

Execute a callback over each item.

EnumeratesValues::eachSpread() — Method in class EnumeratesValues

Execute a callback over each nested chunk of items.

EnumeratesValues::every() — Method in class EnumeratesValues

Determine if all items pass the given truth test.

EnumeratesValues::escapeWhenCastingToString() — Method in class EnumeratesValues

Indicate that the model's string representation should be escaped when __toString is invoked.

EnumeratesValues::equality() — Method in class EnumeratesValues

Make a function to check an item's equality.

ValidatedInput::except() — Method in class ValidatedInput

Get all of the input except for a specified array of items.

RunsInParallel::execute() — Method in class RunsInParallel

Runs the test suite.

TestDatabases::ensureTestDatabaseExists() — Method in class TestDatabases

Ensure a test database exists and returns its name.

TestDatabases::ensureSchemaIsUpToDate() — Method in class TestDatabases

Ensure the current database test schema is up to date.

ArraySubset::evaluate() — Method in class ArraySubset

Evaluates the constraint for parameter $other.

$ CountInDatabase#expectedCountProperty in class CountInDatabase

The expected table entries count that will be checked against the actual count.

AssertableJson::each() — Method in class AssertableJson

Instantiate a new "scope" on each child element.

Has::etc() — Method in class Has

Disables the interaction check.

Interaction::etc() — Method in class Interaction

Disables the interaction check.

Matching::ensureSorted() — Method in class Matching

Ensures that all properties are sorted the same way, recursively.

$ PendingCommand#expectedExitCodeProperty in class PendingCommand

The expected exit code.

PendingCommand::expectsQuestion() — Method in class PendingCommand

Specify an expected question that will be asked when the command runs.

PendingCommand::expectsConfirmation() — Method in class PendingCommand

Specify an expected confirmation question that will be asked when the command runs.

PendingCommand::expectsChoice() — Method in class PendingCommand

Specify an expected choice question with expected answers that will be asked/shown when the command runs.

PendingCommand::expectsOutput() — Method in class PendingCommand

Specify output that should be printed when the command runs.

PendingCommand::expectsOutputToContain() — Method in class PendingCommand

Specify that the given string should be contained in the command output.

PendingCommand::expectsTable() — Method in class PendingCommand

Specify a table that should be printed when the command runs.

PendingCommand::execute() — Method in class PendingCommand

Execute the command.

$ TestResponse#exceptionsProperty in class TestResponse

The collection of logged exceptions for the request.

TestResponse::ensureResponseHasView() — Method in class TestResponse

Ensure that the response has a view as its original content.

ValidatesAttributes::extractDistinctValues() — Method in class ValidatesAttributes

Extract the distinct values from the data.

$ Factory#extensionsProperty in class Factory

All of the custom validator extensions.

$ Factory#excludeUnvalidatedArrayKeysProperty in class Factory

Indicates that unvalidated array keys should be excluded, even if the parent array was validated.

Factory::extend() — Method in class Factory

Register a custom validator extension.

Factory::extendImplicit() — Method in class Factory

Register a custom implicit validator extension.

Factory::extendDependent() — Method in class Factory

Register a custom dependent validator extension.

Factory::excludeUnvalidatedArrayKeys() — Method in class Factory

Indicate that unvalidated array keys should be excluded from the validated data, even if the parent array was validated.

Rule::exists() — Method in class Rule

Get an exists constraint builder instance.

Rule::excludeIf() — Method in class Rule

Get a exclude_if constraint builder instance.

Rule::enum() — Method in class Rule

Get an enum constraint builder instance.

EnumClass in namespace Illuminate\Validation\Rules
ExcludeIfClass in namespace Illuminate\Validation\Rules
ExistsClass in namespace Illuminate\Validation\Rules
ValidationData::extractValuesForWildcards() — Method in class ValidationData

Get all of the exact attribute values for a given wildcard attribute.

ValidationData::extractDataFromPath() — Method in class ValidationData

Extract data based on the given dot-notated path.

$ ValidationException#errorBagProperty in class ValidationException

The name of the error bag.

ValidationException::errors() — Method in class ValidationException

Get all of the validation error messages.

ValidationException::errorBag() — Method in class ValidationException

Set the error bag on the exception.

ValidationRuleParser::explode() — Method in class ValidationRuleParser

Parse the human-friendly rules into a full rules array for the validator.

ValidationRuleParser::explodeRules() — Method in class ValidationRuleParser

Explode the rules into an array of explicit rules.

ValidationRuleParser::explodeExplicitRule() — Method in class ValidationRuleParser

Explode the explicit rule into an array if necessary.

ValidationRuleParser::explodeWildcardRules() — Method in class ValidationRuleParser

Define a set of rules that apply to each element in an array attribute.

$ Validator#excludeAttributesProperty in class Validator

Attributes that should be excluded from the validated data.

$ Validator#excludeUnvalidatedArrayKeysProperty in class Validator

Indicates that unvalidated array keys should be excluded, even if the parent array was validated.

$ Validator#extensionsProperty in class Validator

All of the custom validator extensions.

$ Validator#excludeRulesProperty in class Validator

The validation rules that can exclude an attribute.

$ Validator#exceptionProperty in class Validator

The exception to throw upon failure.

Validator::excludeAttribute() — Method in class Validator

Add the given attribute to the list of excluded attributes.

Validator::errors() — Method in class Validator

An alternative more semantic shortcut to the message container.

$ BladeCompiler#extensionsProperty in class BladeCompiler

All of the registered extensions.

$ BladeCompiler#escapedTagsProperty in class BladeCompiler

Array of opening and closing tags for escaped echos.

$ BladeCompiler#echoFormatProperty in class BladeCompiler

The "regular" / legacy echo string format.

Compiler::ensureCompiledDirectoryExists() — Method in class Compiler

Create the compiled file directory if necessary.

ComponentTagCompiler::escapeSingleQuotesOutsideOfPhpBlocks() — Method in class ComponentTagCompiler

Escape the single quotes in the given string that are outside of PHP blocks.

$ CompilesEchos#echoHandlersProperty in class CompilesEchos

Custom rendering callbacks for stringable objects.

$ Component#exceptProperty in class Component

The properties / methods that should not be exposed to the component.

Component::extractConstructorParameters() — Method in class Component

Extract the constructor parameters for the component.

Component::extractBladeViewFromString() — Method in class Component

Create a Blade view with the raw component string content.

Component::extractPublicProperties() — Method in class Component

Extract the public properties for the component.

Component::extractPublicMethods() — Method in class Component

Extract the public methods for the component.

ComponentAttributeBag::except() — Method in class ComponentAttributeBag

Exclude the given attribute from the attribute array.

ComponentAttributeBag::exceptProps() — Method in class ComponentAttributeBag

Exclude the given attribute from the attribute array.

ComponentAttributeBag::extractPropNames() — Method in class ComponentAttributeBag

Extract prop names from given keys.

ManagesComponents::endSlot() — Method in class ManagesComponents

Save the slot content for rendering.

ManagesLayouts::extendSection() — Method in class ManagesLayouts

Append content to a given section.

ManagesStacks::extendPush() — Method in class ManagesStacks

Append content to a given push section.

ManagesStacks::extendPrepend() — Method in class ManagesStacks

Prepend content to a given stack.

EngineClass in namespace Illuminate\View\Engines
EngineResolverClass in namespace Illuminate\View\Engines
PhpEngine::evaluatePath() — Method in class PhpEngine

Get the evaluated contents of the view at the given path.

$ Factory#enginesProperty in class Factory

The engine implementation.

$ Factory#eventsProperty in class Factory

The event dispatcher instance.

$ Factory#extensionsProperty in class Factory

The extension to engine bindings.

Factory::exists() — Method in class Factory

Determine if a given view exists.

$ FileViewFinder#extensionsProperty in class FileViewFinder

Register a view extension with the finder.

$ View#engineProperty in class View

The engine implementation.

F

Gate::formatAbilityToMethod() — Method in class Gate

Format the policy ability into a method name.

Gate::forUser() — Method in class Gate

Get a gate instance for the given user.

AuthManager::forgetGuards() — Method in class AuthManager

Forget all of the resolved guard instances.

FailedClass in namespace Illuminate\Auth\Events
GuardHelpers::forgetUser() — Method in class GuardHelpers

Forget the current user.

SessionGuard::failedBasicResponse() — Method in class SessionGuard

Get the response for basic authentication.

SessionGuard::fireAttemptEvent() — Method in class SessionGuard

Fire the attempt event with the arguments.

SessionGuard::fireValidatedEvent() — Method in class SessionGuard

Fires the validated event if the dispatcher is set.

SessionGuard::fireLoginEvent() — Method in class SessionGuard

Fire the login event if the dispatcher is set.

SessionGuard::fireAuthenticatedEvent() — Method in class SessionGuard

Fire the authenticated event if the dispatcher is set.

SessionGuard::fireOtherDeviceLogoutEvent() — Method in class SessionGuard

Fire the other device logout event if the dispatcher is set.

SessionGuard::fireFailedEvent() — Method in class SessionGuard

Fire the failed authentication attempt event with the given arguments.

BroadcastEvent::formatProperty() — Method in class BroadcastEvent

Format the given value for a property.

BroadcastManager::forgetDrivers() — Method in class BroadcastManager

Forget all of the resolved driver instances.

AblyBroadcaster::formatChannels() — Method in class AblyBroadcaster

Format the channel array into an array of strings.

Broadcaster::formatChannels() — Method in class Broadcaster

Format the channel array into an array of strings.

RedisBroadcaster::formatChannels() — Method in class RedisBroadcaster

Format the channel array into an array of strings.

$ Batch#failedJobsProperty in class Batch

The total number of jobs that have failed.

$ Batch#failedJobIdsProperty in class Batch

The IDs of the jobs that have failed.

$ Batch#finishedAtProperty in class Batch

The date indicating when the batch was finished.

Batch::fresh() — Method in class Batch

Get a fresh instance of the batch represented by this ID.

Batch::finished() — Method in class Batch

Determine if the batch has finished executing.

BatchRepository::find() — Method in class BatchRepository

Retrieve information about an existing batch.

$ DatabaseBatchRepository#factoryProperty in class DatabaseBatchRepository

The batch factory instance.

DatabaseBatchRepository::find() — Method in class DatabaseBatchRepository

Retrieve information about an existing batch.

Dispatcher::findBatch() — Method in class Dispatcher

Attempt to find the batch with the given ID.

PendingBatch::finally() — Method in class PendingBatch

Add a callback to be executed after the batch has finished executing.

PendingBatch::finallyCallbacks() — Method in class PendingBatch

Get the "finally" callbacks that have been registered with the pending batch.

$ UpdatedBatchJobCounts#failedJobsProperty in class UpdatedBatchJobCounts

The number of failed jobs that belong to the batch.

ApcStore::forever() — Method in class ApcStore

Store an item in the cache indefinitely.

ApcStore::forget() — Method in class ApcStore

Remove an item from the cache.

ApcStore::flush() — Method in class ApcStore

Remove all items from the cache.

ApcWrapper::flush() — Method in class ApcWrapper

Remove all items from the cache.

ArrayLock::forceRelease() — Method in class ArrayLock

Releases this lock in disregard of ownership.

ArrayStore::forever() — Method in class ArrayStore

Store an item in the cache indefinitely.

ArrayStore::forget() — Method in class ArrayStore

Remove an item from the cache.

ArrayStore::flush() — Method in class ArrayStore

Remove all items from the cache.

CacheLock::forceRelease() — Method in class CacheLock

Releases this lock regardless of ownership.

CacheManager::forgetDriver() — Method in class CacheManager

Unset the given driver instances.

$ CacheTableCommand#filesProperty in class CacheTableCommand

The filesystem instance.

$ ClearCommand#filesProperty in class ClearCommand

The filesystem instance.

ClearCommand::flushFacades() — Method in class ClearCommand

Flush the real-time facades stored in the cache directory.

ForgetCommandClass in namespace Illuminate\Cache\Console
DatabaseLock::forceRelease() — Method in class DatabaseLock

Releases this lock in disregard of ownership.

DatabaseStore::forever() — Method in class DatabaseStore

Store an item in the cache indefinitely.

DatabaseStore::forget() — Method in class DatabaseStore

Remove an item from the cache.

DatabaseStore::flush() — Method in class DatabaseStore

Remove all items from the cache.

DynamoDbLock::forceRelease() — Method in class DynamoDbLock

Release this lock in disregard of ownership.

DynamoDbStore::forever() — Method in class DynamoDbStore

Store an item in the cache indefinitely.

DynamoDbStore::forget() — Method in class DynamoDbStore

Remove an item from the cache.

DynamoDbStore::flush() — Method in class DynamoDbStore

Remove all items from the cache.

FileLockClass in namespace Illuminate\Cache
FileStoreClass in namespace Illuminate\Cache
$ FileStore#filesProperty in class FileStore

The Illuminate Filesystem instance.

$ FileStore#filePermissionProperty in class FileStore

Octal representation of the cache file permissions.

FileStore::forever() — Method in class FileStore

Store an item in the cache indefinitely.

FileStore::forget() — Method in class FileStore

Remove an item from the cache.

FileStore::flush() — Method in class FileStore

Remove all items from the cache.

MemcachedLock::forceRelease() — Method in class MemcachedLock

Releases this lock in disregard of ownership.

MemcachedStore::forever() — Method in class MemcachedStore

Store an item in the cache indefinitely.

MemcachedStore::forget() — Method in class MemcachedStore

Remove an item from the cache.

MemcachedStore::flush() — Method in class MemcachedStore

Remove all items from the cache.

NoLock::forceRelease() — Method in class NoLock

Releases this lock in disregard of ownership.

NullStore::forever() — Method in class NullStore

Store an item in the cache indefinitely.

NullStore::forget() — Method in class NullStore

Remove an item from the cache.

NullStore::flush() — Method in class NullStore

Remove all items from the cache.

RateLimiter::for() — Method in class RateLimiter

Register a named limiter configuration.

RedisLock::forceRelease() — Method in class RedisLock

Releases this lock in disregard of ownership.

RedisStore::forever() — Method in class RedisStore

Store an item in the cache indefinitely.

RedisStore::forget() — Method in class RedisStore

Remove an item from the cache.

RedisStore::flush() — Method in class RedisStore

Remove all items from the cache.

RedisStore::flushStaleTags() — Method in class RedisStore

Remove all expired tag set entries.

RedisTagSet::flushStaleEntries() — Method in class RedisTagSet

Remove the stale entries from the tag set.

RedisTagSet::flushTag() — Method in class RedisTagSet

Flush the tag from the cache.

RedisTaggedCache::forever() — Method in class RedisTaggedCache

Store an item in the cache indefinitely.

RedisTaggedCache::flush() — Method in class RedisTaggedCache

Remove all items from the cache.

RedisTaggedCache::flushValues() — Method in class RedisTaggedCache

Flush the individual cache entries for the tags.

RedisTaggedCache::flushStale() — Method in class RedisTaggedCache

Remove all stale reference entries from the tag set.

Repository::forever() — Method in class Repository

Store an item in the cache indefinitely.

Repository::forget() — Method in class Repository

Remove an item from the cache.

TagSet::flush() — Method in class TagSet

Flush all the tags in the set.

TagSet::flushTag() — Method in class TagSet

Flush the tag from the cache.

TaggedCache::flush() — Method in class TaggedCache

Remove all items from the cache.

Application::formatCommandString() — Method in class Application

Format the given command as a fully-qualified executable command.

Application::forgetBootstrappers() — Method in class Application

Clear the console application bootstrappers.

BufferedConsoleOutput::fetch() — Method in class BufferedConsoleOutput

Empties the buffer and returns its content.

CacheCommandMutex::forget() — Method in class CacheCommandMutex

Release the mutex for the given command.

CommandMutex::forget() — Method in class CommandMutex

Release the mutex for the given command.

$ GeneratorCommand#filesProperty in class GeneratorCommand

The filesystem instance.

CacheEventMutex::forget() — Method in class CacheEventMutex

Clear the event mutex for the given event.

$ Event#filtersProperty in class Event

The array of filter callbacks.

Event::finish() — Method in class Event

Mark the command process as finished and run callbacks/cleanup.

Event::filtersPass() — Method in class Event

Determine if the filters pass for the event.

EventMutex::forget() — Method in class EventMutex

Clear the event mutex for the given event.

ManagesFrequencies::fridays() — Method in class ManagesFrequencies

Schedule the event to run only on Fridays.

FactoryClass in namespace Illuminate\Console\View\Components
Container::factory() — Method in class Container

Get a closure to resolve the given type from the container.

Container::findInContextualBindings() — Method in class Container

Find the concrete binding for the given abstract in the contextual binding array.

Container::fireBeforeResolvingCallbacks() — Method in class Container

Fire all of the before resolving callbacks.

Container::fireBeforeCallbackArray() — Method in class Container

Fire an array of callbacks with an object.

Container::fireResolvingCallbacks() — Method in class Container

Fire all of the resolving callbacks.

Container::fireAfterResolvingCallbacks() — Method in class Container

Fire all of the after resolving callbacks.

Container::fireCallbackArray() — Method in class Container

Fire an array of callbacks with an object.

Container::forgetExtenders() — Method in class Container

Remove all of the extender callbacks for a given type.

Container::forgetInstance() — Method in class Container

Remove a resolved instance from the instance cache.

Container::forgetInstances() — Method in class Container

Clear all of the instances from the container.

Container::forgetScopedInstances() — Method in class Container

Clear all of the scoped instances from the container.

Container::flush() — Method in class Container

Flush the container of all bindings and resolved instances.

Gate::forUser() — Method in class Gate

Get a guard instance for the given user.

FactoryClass in namespace Illuminate\Contracts\Auth
FactoryClass in namespace Illuminate\Contracts\Broadcasting
QueueingDispatcher::findBatch() — Method in class QueueingDispatcher

Attempt to find the batch with the given ID.

FactoryClass in namespace Illuminate\Contracts\Cache
Lock::forceRelease() — Method in class Lock

Releases this lock in disregard of ownership.

Repository::forever() — Method in class Repository

Store an item in the cache indefinitely.

Repository::forget() — Method in class Repository

Remove an item from the cache.

Store::forever() — Method in class Store

Store an item in the cache indefinitely.

Store::forget() — Method in class Store

Remove an item from the cache.

Store::flush() — Method in class Store

Remove all items from the cache.

Container::factory() — Method in class Container

Get a closure to resolve the given type from the container.

Container::flush() — Method in class Container

Flush the container of all bindings and resolved instances.

FactoryClass in namespace Illuminate\Contracts\Cookie
Factory::forever() — Method in class Factory

Create a cookie that lasts "forever" (five years).

Factory::forget() — Method in class Factory

Expire the given cookie.

Dispatcher::flush() — Method in class Dispatcher

Flush a set of pushed events.

Dispatcher::forget() — Method in class Dispatcher

Remove a set of listeners from the dispatcher.

Dispatcher::forgetPushed() — Method in class Dispatcher

Forget all of the queued listeners.

FactoryClass in namespace Illuminate\Contracts\Filesystem
FileNotFoundExceptionClass in namespace Illuminate\Contracts\Filesystem
FilesystemClass in namespace Illuminate\Contracts\Filesystem
Filesystem::files() — Method in class Filesystem

Get an array of all files in a directory.

FactoryClass in namespace Illuminate\Contracts\Mail
FactoryClass in namespace Illuminate\Contracts\Notifications
CursorPaginator::fragment() — Method in class CursorPaginator

Get / set the URL fragment to be appended to URLs.

Paginator::fragment() — Method in class Paginator

Get / set the URL fragment to be appended to URLs.

Paginator::firstItem() — Method in class Paginator

Get the "index" of the first item being paginated.

ProcessResult::failed() — Method in class ProcessResult

Determine if the process failed.

FactoryClass in namespace Illuminate\Contracts\Queue
Job::fire() — Method in class Job

Fire the job.

Job::fail() — Method in class Job

Delete the job, call the "failed" method, and raise the failed job event.

Monitor::failing() — Method in class Monitor

Register a callback to be executed when a job fails after the maximum number of retries.

FactoryClass in namespace Illuminate\Contracts\Redis
ResponseFactory::file() — Method in class ResponseFactory

Return the raw contents of a binary file.

Session::forget() — Method in class Session

Remove one or many items from the session.

Session::flush() — Method in class Session

Remove all of the items from the session.

MessageBag::first() — Method in class MessageBag

Get the first message from the bag for a given key.

MessageBag::forget() — Method in class MessageBag

Remove a message from the bag.

FactoryClass in namespace Illuminate\Contracts\Validation
Validator::fails() — Method in class Validator

Determine if the data fails the validation rules.

Validator::failed() — Method in class Validator

Get the failed validation rules.

FactoryClass in namespace Illuminate\Contracts\View
Factory::file() — Method in class Factory

Get the evaluated view contents for the given path.

CookieJar::forever() — Method in class CookieJar

Create a cookie that lasts "forever" (400 days).

CookieJar::forget() — Method in class CookieJar

Expire the given cookie.

CookieJar::flushQueuedCookies() — Method in class CookieJar

Flush the cookies which have been queued for the next request.

BuildsQueries::first() — Method in class BuildsQueries

Execute the query and get the first result.

$ Connection#fetchModeProperty in class Connection

The default fetch mode of the connection.

Connection::fireConnectionEvent() — Method in class Connection

Fire an event for this connection.

Connection::forgetRecordModificationState() — Method in class Connection

Reset the record modification state.

Connection::flushQueryLog() — Method in class Connection

Clear the query log.

FactoryMakeCommandClass in namespace Illuminate\Database\Console\Factories
FreshCommandClass in namespace Illuminate\Database\Console\Migrations
TableCommand::foreignKeys() — Method in class TableCommand

Get the information regarding the table's foreign keys.

$ DatabaseManager#factoryProperty in class DatabaseManager

The database connection factory instance.

DatabaseManager::forgetExtension() — Method in class DatabaseManager

Remove an extension connection resolver.

$ DatabaseServiceProvider#fakersProperty in class DatabaseServiceProvider

The array of resolved Faker instances.

Builder::firstWhere() — Method in class Builder

Add a basic where clause to the query, and return the first result.

Builder::fromQuery() — Method in class Builder

Create a collection of models from a raw query.

Builder::find() — Method in class Builder

Find a model by its primary key.

Builder::findMany() — Method in class Builder

Find multiple models by their primary keys.

Builder::findOrFail() — Method in class Builder

Find a model by its primary key or throw an exception.

Builder::findOrNew() — Method in class Builder

Find a model by its primary key or return fresh model instance.

Builder::findOr() — Method in class Builder

Find a model by its primary key or call a callback.

Builder::firstOrNew() — Method in class Builder

Get the first record matching the attributes or instantiate it.

Builder::firstOrCreate() — Method in class Builder

Get the first record matching the attributes or create it.

Builder::firstOrFail() — Method in class Builder

Execute the query and get the first result or throw an exception.

Builder::firstOr() — Method in class Builder

Execute the query and get the first result or call a callback.

Builder::forceCreate() — Method in class Builder

Save a new model and return the instance. Allow mass-assignment.

Builder::forceDelete() — Method in class Builder

Run the default delete function on the builder.

Collection::find() — Method in class Collection
Collection::fresh() — Method in class Collection

Reload a fresh model instance from the database for all the entities.

Collection::flatten() — Method in class Collection

Get a flattened array of the items in the collection.

Collection::flip() — Method in class Collection

Flip the items in the collection.

$ GuardsAttributes#fillableProperty in class GuardsAttributes

The attributes that are mass assignable.

GuardsAttributes::fillable() — Method in class GuardsAttributes

Set the fillable attributes for the model.

GuardsAttributes::fillableFromArray() — Method in class GuardsAttributes

Get the fillable attributes of a given array.

HasAttributes::fillJsonAttribute() — Method in class HasAttributes

Set a given JSON attribute on the model.

HasAttributes::fromJson() — Method in class HasAttributes

Decode the given JSON back into an array or object.

HasAttributes::fromEncryptedString() — Method in class HasAttributes

Decrypt the given encrypted string.

HasAttributes::fromFloat() — Method in class HasAttributes

Decode the given float.

HasAttributes::fromDateTime() — Method in class HasAttributes

Convert a DateTime to a storable string.

HasEvents::fireModelEvent() — Method in class HasEvents

Fire the given event for the model.

HasEvents::fireCustomModelEvent() — Method in class HasEvents

Fire a custom model event for the given event.

HasEvents::filterModelEventResults() — Method in class HasEvents

Filter the model event results.

HasEvents::flushEventListeners() — Method in class HasEvents

Remove all the event listeners for the model.

HasTimestamps::freshTimestamp() — Method in class HasTimestamps

Get a fresh timestamp for the model.

HasTimestamps::freshTimestampString() — Method in class HasTimestamps

Get a fresh timestamp for the model.

$ BelongsToManyRelationship#factoryProperty in class BelongsToManyRelationship

The related factory instance.

$ BelongsToRelationship#factoryProperty in class BelongsToRelationship

The related factory instance.

FactoryClass in namespace Illuminate\Database\Eloquent\Factories
$ Factory#forProperty in class Factory

The child relationships that will be applied to the model.

$ Factory#fakerProperty in class Factory

The current Faker instance.

$ Factory#factoryNameResolverProperty in class Factory

The factory name resolver.

Factory::forEachSequence() — Method in class Factory

Add a new sequenced state transformation to the model definition and update the pending creation count to the size of the sequence.

Factory::for() — Method in class Factory

Define a parent relationship for the model.

Factory::factoryForModel() — Method in class Factory

Get a new factory instance for the given model name.

HasFactory::factory() — Method in class HasFactory

Get a new factory instance for the model.

$ Relationship#factoryProperty in class Relationship

The related factory instance.

JsonEncodingException::forModel() — Method in class JsonEncodingException

Create a new JSON encoding exception for the model.

JsonEncodingException::forResource() — Method in class JsonEncodingException

Create a new JSON encoding exception for the resource.

JsonEncodingException::forAttribute() — Method in class JsonEncodingException

Create a new JSON encoding exception for an attribute.

Model::fill() — Method in class Model

Fill the model with an array of attributes.

Model::forceFill() — Method in class Model

Fill the model with an array of attributes. Force mass assignment.

Model::finishSave() — Method in class Model

Perform any actions that are necessary after the model is saved.

Model::forceDelete() — Method in class Model

Force a hard delete on a soft deleted model.

Model::fresh() — Method in class Model

Reload a fresh model instance from the database.

$ BelongsTo#foreignKeyProperty in class BelongsTo

The foreign key of the parent model.

$ BelongsToMany#foreignPivotKeyProperty in class BelongsToMany

The foreign key of the parent model.

BelongsToMany::findOrNew() — Method in class BelongsToMany

Find a related model by its primary key or return a new instance of the related model.

BelongsToMany::firstOrNew() — Method in class BelongsToMany

Get the first related model record matching the attributes or instantiate it.

BelongsToMany::firstOrCreate() — Method in class BelongsToMany

Get the first related record matching the attributes or create it.

BelongsToMany::find() — Method in class BelongsToMany

Find a related model by its primary key.

BelongsToMany::findMany() — Method in class BelongsToMany

Find multiple related models by their primary keys.

BelongsToMany::findOrFail() — Method in class BelongsToMany

Find a related model by its primary key or throw an exception.

BelongsToMany::findOr() — Method in class BelongsToMany

Find a related model by its primary key or call a callback.

BelongsToMany::firstWhere() — Method in class BelongsToMany

Add a basic where clause to the query, and return the first result.

BelongsToMany::first() — Method in class BelongsToMany

Execute the query and get the first result.

BelongsToMany::firstOrFail() — Method in class BelongsToMany

Execute the query and get the first result or throw an exception.

BelongsToMany::firstOr() — Method in class BelongsToMany

Execute the query and get the first result or call a callback.

$ AsPivot#foreignKeyProperty in class AsPivot

The name of the foreign key column.

AsPivot::fromAttributes() — Method in class AsPivot

Create a new pivot model instance.

AsPivot::fromRawAttributes() — Method in class AsPivot

Create a new pivot model from raw values returned from a query.

InteractsWithPivotTable::formatRecordsList() — Method in class InteractsWithPivotTable

Format the sync / toggle record list so that it is keyed by ID.

InteractsWithPivotTable::formatAttachRecords() — Method in class InteractsWithPivotTable

Create an array of records to insert into the pivot table.

InteractsWithPivotTable::formatAttachRecord() — Method in class InteractsWithPivotTable

Create a full attachment record payload.

$ HasManyThrough#farParentProperty in class HasManyThrough

The far parent model instance.

$ HasManyThrough#firstKeyProperty in class HasManyThrough

The near key on the relationship.

HasManyThrough::firstOrNew() — Method in class HasManyThrough

Get the first related model record matching the attributes or instantiate it.

HasManyThrough::firstWhere() — Method in class HasManyThrough

Add a basic where clause to the query, and return the first result.

HasManyThrough::first() — Method in class HasManyThrough

Execute the query and get the first related model.

HasManyThrough::firstOrFail() — Method in class HasManyThrough

Execute the query and get the first result or throw an exception.

HasManyThrough::firstOr() — Method in class HasManyThrough

Execute the query and get the first result or call a callback.

HasManyThrough::find() — Method in class HasManyThrough

Find a related model by its primary key.

HasManyThrough::findMany() — Method in class HasManyThrough

Find multiple related models by their primary keys.

HasManyThrough::findOrFail() — Method in class HasManyThrough

Find a related model by its primary key or throw an exception.

HasManyThrough::findOr() — Method in class HasManyThrough

Find a related model by its primary key or call a callback.

$ HasOneOrMany#foreignKeyProperty in class HasOneOrMany

The foreign key of the parent model.

HasOneOrMany::findOrNew() — Method in class HasOneOrMany

Find a model by its primary key or return a new instance of the related model.

HasOneOrMany::firstOrNew() — Method in class HasOneOrMany

Get the first related model record matching the attributes or instantiate it.

HasOneOrMany::firstOrCreate() — Method in class HasOneOrMany

Get the first related record matching the attributes or create it.

HasOneOrMany::forceCreate() — Method in class HasOneOrMany

Create a new instance of the related model. Allow mass-assignment.

MorphMany::forceCreate() — Method in class MorphMany

Create a new instance of the related model. Allow mass-assignment.

$ SoftDeletes#forceDeletingProperty in class SoftDeletes

Indicates if the model is currently force deleting.

SoftDeletes::forceDelete() — Method in class SoftDeletes

Force a hard delete on a soft deleted model.

SoftDeletes::forceDeleteQuietly() — Method in class SoftDeletes

Force a hard delete on a soft deleted model without raising any events.

SoftDeletes::forceDeleting() — Method in class SoftDeletes

Register a "forceDeleting" model event callback with the dispatcher.

SoftDeletes::forceDeleted() — Method in class SoftDeletes

Register a "forceDeleted" model event callback with the dispatcher.

$ MigrationCreator#filesProperty in class MigrationCreator

The filesystem instance.

MigrationCreator::firePostCreateHooks() — Method in class MigrationCreator

Fire the registered post create hooks.

$ Migrator#filesProperty in class Migrator

The filesystem instance.

Migrator::fireMigrationEvent() — Method in class Migrator

Fire the given event for the migration.

QueryException::formatMessage() — Method in class QueryException

Format the SQL error message.

$ Builder#fromProperty in class Builder

The table which the query is targeting.

Builder::fromSub() — Method in class Builder

Makes "from" fetch from a subquery.

Builder::fromRaw() — Method in class Builder

Add a raw from clause to the query.

Builder::from() — Method in class Builder

Set the table which the query is targeting.

Builder::forceIndex() — Method in class Builder

Add an index hint to force a query index.

Builder::forNestedWhere() — Method in class Builder

Create a new query instance for nested where condition.

Builder::forPage() — Method in class Builder

Set the limit and offset for a given page.

Builder::forPageBeforeId() — Method in class Builder

Constrain the query to the previous "page" of results before a given ID.

Builder::forPageAfterId() — Method in class Builder

Constrain the query to the next "page" of results after a given ID.

Builder::find() — Method in class Builder

Execute a query for a single record by ID.

Builder::findOr() — Method in class Builder

Execute a query for a single record by ID or call a callback.

Builder::forSubQuery() — Method in class Builder

Create a new query instance for a sub-query.

Builder::flattenValue() — Method in class Builder

Get a scalar type value from an unknown type of input.

JoinClause::forSubQuery() — Method in class JoinClause

Create a new query instance for sub-query.

Blueprint::fullText() — Method in class Blueprint

Specify an fulltext for the table.

Blueprint::foreign() — Method in class Blueprint

Specify a foreign key for the table.

Blueprint::foreignId() — Method in class Blueprint

Create a new unsigned big integer (8-byte) column on the table.

Blueprint::foreignIdFor() — Method in class Blueprint

Create a foreign ID column for the given model.

Blueprint::float() — Method in class Blueprint

Create a new float column on the table.

Blueprint::foreignUuid() — Method in class Blueprint

Create a new UUID column on the table with a foreign key constraint.

Blueprint::foreignUlid() — Method in class Blueprint

Create a new ULID column on the table with a foreign key constraint.

ColumnDefinition::first() — Method in class ColumnDefinition
ColumnDefinition::from() — Method in class ColumnDefinition
ColumnDefinition::fulltext() — Method in class ColumnDefinition

Add a fulltext index

ForeignIdColumnDefinitionClass in namespace Illuminate\Database\Schema
ForeignKeyDefinitionClass in namespace Illuminate\Database\Schema
$ Grammar#fluentCommandsProperty in class Grammar

The commands to be executed outside of create or alter command.

$ MySqlGrammar#fluentCommandsProperty in class MySqlGrammar

The commands to be executed outside of create or alter command.

$ PostgresGrammar#fluentCommandsProperty in class PostgresGrammar

The commands to be executed outside of create or alter command.

$ SqlServerGrammar#fluentCommandsProperty in class SqlServerGrammar

The commands to be executed outside of create or alter command.

$ SchemaState#filesProperty in class SchemaState

The filesystem instance.

CallQueuedListener::failed() — Method in class CallQueuedListener

Call the failed method on the job instance.

Dispatcher::flush() — Method in class Dispatcher

Flush a set of pushed events.

Dispatcher::forget() — Method in class Dispatcher

Remove a set of listeners from the dispatcher.

Dispatcher::forgetPushed() — Method in class Dispatcher

Forget all of the pushed listeners.

InvokeQueuedClosure::failed() — Method in class InvokeQueuedClosure

Handle a job failure.

NullDispatcher::flush() — Method in class NullDispatcher

Flush a set of pushed events.

NullDispatcher::forget() — Method in class NullDispatcher

Remove a set of listeners from the dispatcher.

NullDispatcher::forgetPushed() — Method in class NullDispatcher

Forget all of the queued listeners.

FilesystemClass in namespace Illuminate\Filesystem
Filesystem::files() — Method in class Filesystem

Get an array of all files in a directory.

FilesystemAdapterClass in namespace Illuminate\Filesystem
FilesystemAdapter::fileExists() — Method in class FilesystemAdapter

Determine if a file exists.

FilesystemAdapter::fileMissing() — Method in class FilesystemAdapter

Determine if a file is missing.

FilesystemAdapter::fallbackName() — Method in class FilesystemAdapter

Convert the string to ASCII characters that are equivalent to the given name.

FilesystemAdapter::files() — Method in class FilesystemAdapter

Get an array of all files in a directory.

FilesystemManagerClass in namespace Illuminate\Filesystem
FilesystemManager::formatS3Config() — Method in class FilesystemManager

Format the given S3 configuration with the default options.

FilesystemManager::forgetDisk() — Method in class FilesystemManager

Unset the given disk instances.

FilesystemServiceProviderClass in namespace Illuminate\Filesystem
$ AliasLoader#facadeNamespaceProperty in class AliasLoader

The namespace for all real-time facades.

AliasLoader::formatFacadeStub() — Method in class AliasLoader

Format the facade stub with the proper namespace and class.

Application::fireAppCallbacks() — Method in class Application

Call the booting callbacks for the application.

Application::flush() — Method in class Application

Flush the container of all bindings and resolved instances.

EmailVerificationRequest::fulfill() — Method in class EmailVerificationRequest

Fulfill the email verification request.

HandleExceptions::fatalErrorFromPhpError() — Method in class HandleExceptions

Create a new fatal error instance from an error array.

HandleExceptions::forwardsTo() — Method in class HandleExceptions

Forward a method call to the given method if an application instance exists.

HandleExceptions::forgetApp() — Method in class HandleExceptions

Clear the local application instance from memory.

ChannelListCommand::forCli() — Method in class ChannelListCommand

Convert the given channels to regular CLI output.

$ ConfigCacheCommand#filesProperty in class ConfigCacheCommand

The filesystem instance.

$ ConfigClearCommand#filesProperty in class ConfigClearCommand

The filesystem instance.

DocsCommand::fetchDocs() — Method in class DocsCommand

Fetch the documentation index from the Laravel website.

$ EnvironmentDecryptCommand#filesProperty in class EnvironmentDecryptCommand

The filesystem instance.

$ EnvironmentEncryptCommand#filesProperty in class EnvironmentEncryptCommand

The filesystem instance.

$ EventClearCommand#filesProperty in class EventClearCommand

The filesystem instance.

EventListCommand::filterEvents() — Method in class EventListCommand

Filter the given events using the provided event name filter.

EventListCommand::filteringByEvent() — Method in class EventListCommand

Determine whether the user is filtering by an event name.

$ RouteCacheCommand#filesProperty in class RouteCacheCommand

The filesystem instance.

$ RouteClearCommand#filesProperty in class RouteClearCommand

The filesystem instance.

RouteListCommand::filterRoute() — Method in class RouteListCommand

Filter the route by URI and / or name.

RouteListCommand::forCli() — Method in class RouteListCommand

Convert the given routes to regular CLI output.

RouteListCommand::formatActionForCli() — Method in class RouteListCommand

Get the formatted action for display on the CLI.

$ VendorPublishCommand#filesProperty in class VendorPublishCommand

The filesystem instance.

$ ViewClearCommand#filesProperty in class ViewClearCommand

The filesystem instance.

WhoopsHandler::forDebug() — Method in class WhoopsHandler

Create a new Whoops handler for debug mode.

FileBasedMaintenanceModeClass in namespace Illuminate\Foundation
FormRequestClass in namespace Illuminate\Foundation\Http
FormRequest::failedValidation() — Method in class FormRequest

Handle a failed validation attempt.

FormRequest::failedAuthorization() — Method in class FormRequest

Handle a failed authorization attempt.

Inspiring::formatForConsole() — Method in class Inspiring

Formats the given quote for a pretty console output.

$ PackageManifest#filesProperty in class PackageManifest

The filesystem instance.

PackageManifest::format() — Method in class PackageManifest

Format the given package name.

$ ProviderRepository#filesProperty in class ProviderRepository

The filesystem instance.

ProviderRepository::freshManifest() — Method in class ProviderRepository

Create a fresh service manifest data structure.

FormRequestServiceProviderClass in namespace Illuminate\Foundation\Providers
FoundationServiceProviderClass in namespace Illuminate\Foundation\Providers
InteractsWithContainer::forgetMock() — Method in class InteractsWithContainer

Instruct the container to forget a previously mocked / spied instance of an object.

InteractsWithSession::flushSession() — Method in class InteractsWithSession

Flush all of the current session data.

InteractsWithTime::freezeTime() — Method in class InteractsWithTime

Freeze time.

InteractsWithTime::freezeSecond() — Method in class InteractsWithTime

Freeze time at the beginning of the current second.

$ MakesHttpRequests#followRedirectsProperty in class MakesHttpRequests

Indicates whether redirects should be followed.

MakesHttpRequests::flushHeaders() — Method in class MakesHttpRequests

Flush all the configured headers.

$ WithFaker#fakerProperty in class WithFaker

The Faker instance.

WithFaker::faker() — Method in class WithFaker

Get the default Faker instance for a given locale.

DeterminesStatusCode::found() — Method in class DeterminesStatusCode

Determine if the response code was a 302 "Found" response.

DeterminesStatusCode::forbidden() — Method in class DeterminesStatusCode

Determine if the response was a 403 "Forbidden" response.

FactoryClass in namespace Illuminate\Http\Client
Factory::fake() — Method in class Factory

Register a stub callable that will intercept requests and be able to return stub responses.

Factory::fakeSequence() — Method in class Factory

Register a response sequence for the given URL pattern.

$ PendingRequest#factoryProperty in class PendingRequest

The factory instance.

$ Pool#factoryProperty in class Pool

The factory instance.

Response::failed() — Method in class Response

Determine if the response indicates a client or server error occurred.

$ ResponseSequence#failWhenEmptyProperty in class ResponseSequence

Indicates that invoking this sequence when it is empty should throw an exception.

CanBePrecognitive::filterPrecognitiveRules() — Method in class CanBePrecognitive

Filter the given array of rules into an array of rules that are included in precognitive headers.

InteractsWithContentTypes::format() — Method in class InteractsWithContentTypes

Get the data format expected in the response.

InteractsWithFlashData::flash() — Method in class InteractsWithFlashData

Flash the input for the current request to the session.

InteractsWithFlashData::flashOnly() — Method in class InteractsWithFlashData

Flash only some of the input to the session.

InteractsWithFlashData::flashExcept() — Method in class InteractsWithFlashData

Flash only some of the input to the session.

InteractsWithFlashData::flush() — Method in class InteractsWithFlashData

Flush all of the old input from the session.

InteractsWithInput::filled() — Method in class InteractsWithInput

Determine if the request contains a non-empty value for an input item.

InteractsWithInput::float() — Method in class InteractsWithInput

Retrieve input as a float value.

InteractsWithInput::file() — Method in class InteractsWithInput

Retrieve a file from the request.

FileClass in namespace Illuminate\Http
FileHelpersClass in namespace Illuminate\Http
JsonResponse::fromJsonString() — Method in class JsonResponse
{@inheritdoc}
FrameGuardClass in namespace Illuminate\Http\Middleware
Request::fullUrl() — Method in class Request

Get the full URL for the request.

Request::fullUrlWithQuery() — Method in class Request

Get the full URL for the request with the added query string parameters.

Request::fullUrlWithoutQuery() — Method in class Request

Get the full URL for the request without the given query string parameters.

Request::fullUrlIs() — Method in class Request

Determine if the current request URL and query string match a pattern.

Request::filterFiles() — Method in class Request

Filter the given array of files, removing any empty values.

Request::fingerprint() — Method in class Request

Get a unique fingerprint for the request / route / IP address.

ConditionallyLoadsAttributes::filter() — Method in class ConditionallyLoadsAttributes

Filter the given data, removing any optional values.

FileClass in namespace Illuminate\Http\Testing
FileFactoryClass in namespace Illuminate\Http\Testing
MimeType::from() — Method in class MimeType

Get the MIME type for a file based on the file's extension.

UploadedFile::fake() — Method in class UploadedFile

Begin creating a new file fake.

LogManager::formatter() — Method in class LogManager

Get a Monolog formatter instance.

LogManager::flushSharedContext() — Method in class LogManager

Flush the shared context.

LogManager::forgetChannel() — Method in class LogManager

Unset the given channel instance.

Logger::fireLogEvent() — Method in class Logger

Fires a log event.

Logger::formatMessage() — Method in class Logger

Format the parameters for the logger.

Attachment::fromPath() — Method in class Attachment

Create a mail attachment from a path.

Attachment::fromData() — Method in class Attachment

Create a mail attachment from in-memory data.

Attachment::fromStorage() — Method in class Attachment

Create a mail attachment from a file in the default storage disk.

Attachment::fromStorageDisk() — Method in class Attachment

Create a mail attachment from a file in the specified storage disk.

MailManager::forgetMailers() — Method in class MailManager

Forget all of the resolved mailer instances.

$ Mailable#fromProperty in class Mailable

The person the message is from.

Mailable::from() — Method in class Mailable

Set the sender of the message.

$ Envelope#fromProperty in class Envelope

The address sending the message.

Envelope::from() — Method in class Envelope

Specify who the message will be "from".

$ Mailer#fromProperty in class Mailer

The global from address and name.

Message::from() — Method in class Message

Add a "from" address to the message.

Message::forgetTo() — Method in class Message

Remove all "to" addresses from the message.

Message::forgetCc() — Method in class Message

Remove all carbon copy addresses from the message.

Message::forgetBcc() — Method in class Message

Remove all of the blind carbon copy addresses from the message.

PendingMail::fill() — Method in class PendingMail

Populate the mailable with the addresses.

SendQueuedMailable::failed() — Method in class SendQueuedMailable

Call the failed method on the mailable instance.

ArrayTransport::flush() — Method in class ArrayTransport

Clear all of the messages from the local collection.

$ NotificationTableCommand#filesProperty in class NotificationTableCommand

The filesystem instance.

$ MailMessage#fromProperty in class MailMessage

The "from" information for the message.

MailMessage::from() — Method in class MailMessage

Set the from address for the mail message.

SimpleMessage::formatLine() — Method in class SimpleMessage

Format the given line of text.

NotificationSender::formatNotifiables() — Method in class NotificationSender

Format the notifiables into a Collection / array if necessary.

SendQueuedNotifications::failed() — Method in class SendQueuedNotifications

Call the failed method on the notification instance.

$ AbstractCursorPaginator#fragmentProperty in class AbstractCursorPaginator

The URL fragment to add to all URLs.

AbstractCursorPaginator::fragment() — Method in class AbstractCursorPaginator

Get / set the URL fragment to be appended to URLs.

$ AbstractPaginator#fragmentProperty in class AbstractPaginator

The URL fragment to add to all URLs.

AbstractPaginator::fragment() — Method in class AbstractPaginator

Get / set the URL fragment to be appended to URLs.

AbstractPaginator::firstItem() — Method in class AbstractPaginator

Get the number of the first item in the slice.

Cursor::fromEncoded() — Method in class Cursor

Get a cursor instance from the encoded string representation.

FactoryClass in namespace Illuminate\Process
$ Factory#fakeHandlersProperty in class Factory

The registered fake handler callbacks.

Factory::fake() — Method in class Factory

Indicate that the process factory should fake processes.

FakeInvokedProcessClass in namespace Illuminate\Process
FakeProcessDescriptionClass in namespace Illuminate\Process
FakeProcessResultClass in namespace Illuminate\Process
FakeProcessResult::failed() — Method in class FakeProcessResult

Determine if the process failed.

FakeProcessSequenceClass in namespace Illuminate\Process
$ FakeProcessSequence#failWhenEmptyProperty in class FakeProcessSequence

Indicates that invoking this sequence when it is empty should throw an exception.

$ PendingProcess#factoryProperty in class PendingProcess

The process factory instance.

$ PendingProcess#fakeHandlersProperty in class PendingProcess

The registered fake handler callbacks.

PendingProcess::forever() — Method in class PendingProcess

Indicate that the process may run forever without timing out.

PendingProcess::fakeFor() — Method in class PendingProcess

Get the fake handler for the given command, if applicable.

$ Pool#factoryProperty in class Pool

The process factory instance.

ProcessResult::failed() — Method in class ProcessResult

Determine if the process failed.

$ CallQueuedClosure#failureCallbacksProperty in class CallQueuedClosure

The callbacks that should be executed on failure.

CallQueuedClosure::failed() — Method in class CallQueuedClosure

Handle a job failure.

CallQueuedHandler::failed() — Method in class CallQueuedHandler

Call the failed method on the job instance.

$ BatchesTableCommand#filesProperty in class BatchesTableCommand

The filesystem instance.

FailedTableCommandClass in namespace Illuminate\Queue\Console
$ FailedTableCommand#filesProperty in class FailedTableCommand

The filesystem instance.

FlushFailedCommandClass in namespace Illuminate\Queue\Console
ForgetFailedCommandClass in namespace Illuminate\Queue\Console
$ TableCommand#filesProperty in class TableCommand

The filesystem instance.

DatabaseFailedJobProvider::find() — Method in class DatabaseFailedJobProvider

Get a single failed job.

DatabaseFailedJobProvider::forget() — Method in class DatabaseFailedJobProvider

Delete a single failed job from storage.

DatabaseFailedJobProvider::flush() — Method in class DatabaseFailedJobProvider

Flush all of the failed jobs from storage.

DatabaseUuidFailedJobProvider::find() — Method in class DatabaseUuidFailedJobProvider

Get a single failed job.

DatabaseUuidFailedJobProvider::forget() — Method in class DatabaseUuidFailedJobProvider

Delete a single failed job from storage.

DatabaseUuidFailedJobProvider::flush() — Method in class DatabaseUuidFailedJobProvider

Flush all of the failed jobs from storage.

DynamoDbFailedJobProvider::find() — Method in class DynamoDbFailedJobProvider

Get a single failed job.

DynamoDbFailedJobProvider::forget() — Method in class DynamoDbFailedJobProvider

Delete a single failed job from storage.

DynamoDbFailedJobProvider::flush() — Method in class DynamoDbFailedJobProvider

Flush all of the failed jobs from storage.

FailedJobProviderInterfaceClass in namespace Illuminate\Queue\Failed
FailedJobProviderInterface::find() — Method in class FailedJobProviderInterface

Get a single failed job.

FailedJobProviderInterface::forget() — Method in class FailedJobProviderInterface

Delete a single failed job from storage.

FailedJobProviderInterface::flush() — Method in class FailedJobProviderInterface

Flush all of the failed jobs from storage.

NullFailedJobProvider::find() — Method in class NullFailedJobProvider

Get a single failed job.

NullFailedJobProvider::forget() — Method in class NullFailedJobProvider

Delete a single failed job from storage.

NullFailedJobProvider::flush() — Method in class NullFailedJobProvider

Flush all of the failed jobs from storage.

InteractsWithQueue::fail() — Method in class InteractsWithQueue

Fail the job from the queue.

$ Job#failedProperty in class Job

Indicates if the job has failed.

Job::fire() — Method in class Job

Fire the job.

Job::fail() — Method in class Job

Delete the job, call the "failed" method, and raise the failed job event.

Job::failed() — Method in class Job

Process an exception that caused the job to fail.

QueueManager::failing() — Method in class QueueManager

Register an event listener for the failed job event.

Worker::failJob() — Method in class Worker

Mark the given job as failed and raise the relevant event.

$ WorkerOptions#forceProperty in class WorkerOptions

Indicates if the worker should run in maintenance mode.

Connection::funnel() — Method in class Connection

Funnel a callback for a maximum number of simultaneous executions.

PhpRedisClusterConnection::flushdb() — Method in class PhpRedisClusterConnection

Flush the selected Redis database on all master nodes.

PhpRedisConnection::flushdb() — Method in class PhpRedisConnection

Flush the selected Redis database.

PredisClusterConnection::flushdb() — Method in class PredisClusterConnection

Flush the selected Redis database on all cluster nodes.

PhpRedisConnector::formatHost() — Method in class PhpRedisConnector

Format the host using the scheme if available.

UrlGenerationException::forMissingParameters() — Method in class UrlGenerationException

Create a new exception for missing route parameters.

ResponseFactory::fallbackName() — Method in class ResponseFactory

Convert the string to ASCII characters that are equivalent to the given name.

ResponseFactory::file() — Method in class ResponseFactory

Return the raw contents of a binary file.

Route::flushController() — Method in class Route

Flush the cached container instance on the route.

Route::forgetParameter() — Method in class Route

Unset a parameter on the route if it is set.

Route::fallback() — Method in class Route

Mark this route as a fallback route.

RouteAction::findCallable() — Method in class RouteAction

Find the callable in an action array.

RouteBinding::forCallback() — Method in class RouteBinding

Create a Route model binding for a given callback.

RouteBinding::forModel() — Method in class RouteBinding

Create a Route model binding for a model.

RouteGroup::formatNamespace() — Method in class RouteGroup

Format the namespace for the new group attributes.

RouteGroup::formatPrefix() — Method in class RouteGroup

Format the prefix for the new group attributes.

RouteGroup::formatWhere() — Method in class RouteGroup

Format the "wheres" for the new group attributes.

RouteGroup::formatAs() — Method in class RouteGroup

Format the "as" clause of the new group attributes.

RouteSignatureParameters::fromAction() — Method in class RouteSignatureParameters

Extract the route action's signature parameters.

RouteSignatureParameters::fromClassMethodString() — Method in class RouteSignatureParameters

Get the parameters for the given class / method by string.

RouteUrlGenerator::formatDomain() — Method in class RouteUrlGenerator

Format the domain and port for the route and request.

Router::fallback() — Method in class Router

Register a new fallback route with the router.

Router::findRoute() — Method in class Router

Find the route matching a given request.

Router::flushMiddlewareGroups() — Method in class Router

Flush the router's middleware groups.

$ UrlGenerator#forcedRootProperty in class UrlGenerator

The forced URL root.

$ UrlGenerator#forceSchemeProperty in class UrlGenerator

The forced scheme for URLs.

$ UrlGenerator#formatHostUsingProperty in class UrlGenerator

The callback to use to format hosts.

$ UrlGenerator#formatPathUsingProperty in class UrlGenerator

The callback to use to format paths.

UrlGenerator::full() — Method in class UrlGenerator

Get the full URL for the current request.

UrlGenerator::formatScheme() — Method in class UrlGenerator

Get the default scheme for a raw URL.

UrlGenerator::formatAction() — Method in class UrlGenerator

Format the given controller action.

UrlGenerator::formatParameters() — Method in class UrlGenerator

Format the array of URL parameters.

UrlGenerator::formatRoot() — Method in class UrlGenerator

Get the base URL for the request.

UrlGenerator::format() — Method in class UrlGenerator

Format the given URL segments into a single URL.

UrlGenerator::forceScheme() — Method in class UrlGenerator

Force the scheme for URLs.

UrlGenerator::forceRootUrl() — Method in class UrlGenerator

Set the forced root URL.

UrlGenerator::formatHostUsing() — Method in class UrlGenerator

Set a callback to be used to format the host of generated URLs.

UrlGenerator::formatPathUsing() — Method in class UrlGenerator

Set a callback to be used to format the path of generated URLs.

$ SessionTableCommand#filesProperty in class SessionTableCommand

The filesystem instance.

FileSessionHandlerClass in namespace Illuminate\Session
$ FileSessionHandler#filesProperty in class FileSessionHandler

The filesystem instance.

Store::flash() — Method in class Store

Flash a key / value pair to the session.

Store::flashInput() — Method in class Store

Flash an input array to the session.

Store::forget() — Method in class Store

Remove one or many items from the session.

Store::flush() — Method in class Store

Remove all of the items from the session.

Arr::first() — Method in class Arr

Return the first element in an array passing a given truth test.

Arr::flatten() — Method in class Arr

Flatten a multi-dimensional array into a single level.

Arr::forget() — Method in class Arr

Remove one or many array items from a given array using "dot" notation.

Collection::filter() — Method in class Collection

Run a filter over each of the items.

Collection::first() — Method in class Collection
Collection::flatten() — Method in class Collection
Collection::flip() — Method in class Collection
Collection::forget() — Method in class Collection

Remove an item from the collection by key.

Collection::firstOrFail() — Method in class Collection

Get the first item in the collection but throw an exception if no matching items exist.

$ Composer#filesProperty in class Composer

The filesystem instance.

Composer::findComposer() — Method in class Composer

Get the composer command for the environment.

$ DateFactory#factoryProperty in class DateFactory

The Carbon factory that should be used when creating dates.

DateFactory::fromSerialized() — Method in class DateFactory
Enumerable::filter() — Method in class Enumerable

Run a filter over each of the items.

Enumerable::first() — Method in class Enumerable
Enumerable::firstWhere() — Method in class Enumerable

Get the first item by the given key value pair.

Enumerable::flatten() — Method in class Enumerable

Get a flattened array of the items in the collection.

Enumerable::flip() — Method in class Enumerable
Enumerable::flatMap() — Method in class Enumerable
Enumerable::forPage() — Method in class Enumerable

"Paginate" the collection by slicing it into a smaller collection.

Enumerable::firstOrFail() — Method in class Enumerable

Get the first item in the collection but throw an exception if no matching items exist.

App::flush() — Method in class App
App::factory() — Method in class App
App::forgetExtenders() — Method in class App
App::forgetInstance() — Method in class App
App::forgetInstances() — Method in class App
App::forgetScopedInstances() — Method in class App
App::flushMacros() — Method in class App
Auth::forgetGuards() — Method in class Auth
Auth::forgetUser() — Method in class Auth
Auth::flushMacros() — Method in class Auth
Broadcast::forgetDrivers() — Method in class Broadcast
Bus::fake() — Method in class Bus

Replace the bound instance with a fake.

Bus::findBatch() — Method in class Bus
Cache::forgetDriver() — Method in class Cache
Cache::forever() — Method in class Cache
Cache::forget() — Method in class Cache
Cache::flushMacros() — Method in class Cache
Cache::flush() — Method in class Cache
Config::flushMacros() — Method in class Config
Cookie::forever() — Method in class Cookie
Cookie::forget() — Method in class Cookie
Cookie::flushQueuedCookies() — Method in class Cookie
Cookie::flushMacros() — Method in class Cookie
DB::forgetExtension() — Method in class DB
DB::flushMacros() — Method in class DB
DB::forgetRecordModificationState() — Method in class DB
DB::flushQueryLog() — Method in class DB
Date::fromSerialized() — Method in class Date
Event::fake() — Method in class Event

Replace the bound instance with a fake.

Event::fakeExcept() — Method in class Event

Replace the bound instance with a fake that fakes all events except the given events.

Event::fakeFor() — Method in class Event

Replace the bound instance with a fake during the given callable's execution.

Event::fakeExceptFor() — Method in class Event

Replace the bound instance with a fake during the given callable's execution.

Event::flush() — Method in class Event
Event::forget() — Method in class Event
Event::forgetPushed() — Method in class Event
Event::flushMacros() — Method in class Event
FacadeClass in namespace Illuminate\Support\Facades
FileClass in namespace Illuminate\Support\Facades
File::files() — Method in class File
File::flushMacros() — Method in class File
Gate::forUser() — Method in class Gate
Hash::forgetDrivers() — Method in class Hash
Http::fake() — Method in class Http

Register a stub callable that will intercept requests and be able to return stub responses.

Http::fakeSequence() — Method in class Http

Register a response sequence for the given URL pattern.

Http::flushMacros() — Method in class Http
Lang::flushParsedKeys() — Method in class Lang
Lang::flushMacros() — Method in class Lang
Log::flushSharedContext() — Method in class Log
Log::forgetChannel() — Method in class Log
Mail::fake() — Method in class Mail

Replace the bound instance with a fake.

Mail::forgetMailers() — Method in class Mail
Mail::flushMacros() — Method in class Mail
Notification::fake() — Method in class Notification

Replace the bound instance with a fake.

Notification::forgetDrivers() — Method in class Notification
Notification::flushMacros() — Method in class Notification
Process::fake() — Method in class Process

Indicate that the process factory should fake processes.

Process::forever() — Method in class Process
Process::flushMacros() — Method in class Process
Queue::fake() — Method in class Queue

Replace the bound instance with a fake.

Queue::failing() — Method in class Queue
RateLimiter::for() — Method in class RateLimiter
Redirect::flushMacros() — Method in class Redirect
Redis::funnel() — Method in class Redis
Redis::flushMacros() — Method in class Redis
Request::fullUrl() — Method in class Request
Request::fullUrlWithQuery() — Method in class Request
Request::fullUrlWithoutQuery() — Method in class Request
Request::fullUrlIs() — Method in class Request
Request::fingerprint() — Method in class Request
Request::filterPrecognitiveRules() — Method in class Request
Request::format() — Method in class Request
Request::flash() — Method in class Request
Request::flashOnly() — Method in class Request
Request::flashExcept() — Method in class Request
Request::flush() — Method in class Request
Request::filled() — Method in class Request
Request::float() — Method in class Request
Request::file() — Method in class Request
Request::flushMacros() — Method in class Request
Response::file() — Method in class Response
Response::flushMacros() — Method in class Response
Route::fallback() — Method in class Route
Route::flushMiddlewareGroups() — Method in class Route
Route::flushMacros() — Method in class Route
Session::forgetDrivers() — Method in class Session
Session::flash() — Method in class Session
Session::flashInput() — Method in class Session
Session::forget() — Method in class Session
Session::flush() — Method in class Session
Session::flushMacros() — Method in class Session
Storage::fake() — Method in class Storage

Replace the given disk with a local testing disk.

Storage::forgetDisk() — Method in class Storage
Storage::files() — Method in class Storage
Storage::fileExists() — Method in class Storage
Storage::fileMissing() — Method in class Storage
Storage::flushMacros() — Method in class Storage
Storage::fileSize() — Method in class Storage
URL::full() — Method in class URL
URL::formatScheme() — Method in class URL
URL::formatParameters() — Method in class URL
URL::formatRoot() — Method in class URL
URL::format() — Method in class URL
URL::forceScheme() — Method in class URL
URL::forceRootUrl() — Method in class URL
URL::formatHostUsing() — Method in class URL
URL::formatPathUsing() — Method in class URL
URL::flushMacros() — Method in class URL
View::file() — Method in class View
View::first() — Method in class View
View::flushState() — Method in class View
View::flushStateIfDoneRendering() — Method in class View
View::flushFinderCache() — Method in class View
View::flushMacros() — Method in class View
View::flushFragments() — Method in class View
View::flushSections() — Method in class View
View::flushStacks() — Method in class View
Vite::flushMacros() — Method in class Vite
FluentClass in namespace Illuminate\Support
Js::from() — Method in class Js

Create a new JavaScript string from the given data.

LazyCollection::filter() — Method in class LazyCollection

Run a filter over each of the items.

LazyCollection::first() — Method in class LazyCollection
LazyCollection::flatten() — Method in class LazyCollection
LazyCollection::flip() — Method in class LazyCollection
LazyCollection::firstOrFail() — Method in class LazyCollection

Get the first item in the collection but throw an exception if no matching items exist.

Lottery::fix() — Method in class Lottery

Set the sequence that will be used to determine lottery results.

Lottery::forceResultWithSequence() — Method in class Lottery

Set the sequence that will be used to determine lottery results.

Manager::forgetDrivers() — Method in class Manager

Forget all of the resolved driver instances.

$ MessageBag#formatProperty in class MessageBag

Default format for message output.

MessageBag::first() — Method in class MessageBag

Get the first message from the message bag for a given key.

MessageBag::forget() — Method in class MessageBag

Remove a message from the message bag.

MultipleInstanceManager::forgetInstance() — Method in class MultipleInstanceManager

Unset the given instances.

NamespacedItemResolver::flushParsedKeys() — Method in class NamespacedItemResolver

Flush the cache of parsed keys.

Str::finish() — Method in class Str

Cap a string with a single instance of a given value.

Str::freezeUuids() — Method in class Str

Always return the same UUID when generating new UUIDs.

Str::flushCache() — Method in class Str

Remove all strings from the casing caches.

Stringable::finish() — Method in class Stringable

Cap a string with a single instance of a given value.

BatchFake::fresh() — Method in class BatchFake

Get a fresh instance of the batch represented by this ID.

BatchRepositoryFake::find() — Method in class BatchRepositoryFake

Retrieve information about an existing batch.

BusFake::findBatch() — Method in class BusFake

Attempt to find the batch with the given ID.

EventFake::flush() — Method in class EventFake

Flush a set of pushed events.

EventFake::forget() — Method in class EventFake

Remove a set of listeners from the dispatcher.

EventFake::forgetPushed() — Method in class EventFake

Forget all of the queued listeners.

FakeClass in namespace Illuminate\Support\Testing\Fakes
MailFake::forgetMailers() — Method in class MailFake

Forget all of the resolved mailer instances.

$ EnumeratesValues#filterProperty in class EnumeratesValues
$ EnumeratesValues#firstProperty in class EnumeratesValues
$ EnumeratesValues#flatMapProperty in class EnumeratesValues
EnumeratesValues::firstWhere() — Method in class EnumeratesValues

Get the first item by the given key value pair.

EnumeratesValues::flatMap() — Method in class EnumeratesValues
EnumeratesValues::forPage() — Method in class EnumeratesValues

"Paginate" the collection by slicing it into a smaller collection.

ForwardsCallsClass in namespace Illuminate\Support\Traits
ForwardsCalls::forwardCallTo() — Method in class ForwardsCalls

Forward a method call to the given object.

ForwardsCalls::forwardDecoratedCallTo() — Method in class ForwardsCalls

Forward a method call to the given object, returning $this if the forwarded call returned itself.

Macroable::flushMacros() — Method in class Macroable

Flush the existing macros.

ReflectsClosures::firstClosureParameterType() — Method in class ReflectsClosures

Get the class name of the first parameter of the given Closure.

ReflectsClosures::firstClosureParameterTypes() — Method in class ReflectsClosures

Get the class names of the first parameter of the given Closure, including union types.

RunsInParallel::forEachProcess() — Method in class RunsInParallel

Apply the given callback for each process.

ArraySubset::failureDescription() — Method in class ArraySubset

Returns the description of the failure.

CountInDatabase::failureDescription() — Method in class CountInDatabase

Get the description of the failure.

HasInDatabase::failureDescription() — Method in class HasInDatabase

Get the description of the failure.

NotSoftDeletedInDatabase::failureDescription() — Method in class NotSoftDeletedInDatabase

Get the description of the failure.

$ SeeInOrder#failedValueProperty in class SeeInOrder

The last value that failed to pass validation.

SeeInOrder::failureDescription() — Method in class SeeInOrder

Get the description of the failure.

SoftDeletedInDatabase::failureDescription() — Method in class SoftDeletedInDatabase

Get the description of the failure.

AssertableJson::first() — Method in class AssertableJson

Instantiate a new "scope" on the first child element.

AssertableJson::fromArray() — Method in class AssertableJson

Create a new instance from an array.

AssertableJson::fromAssertableJsonString() — Method in class AssertableJson

Create a new instance from an AssertableJsonString.

Has::first() — Method in class Has

Instantiate a new "scope" on the first element.

PendingCommand::flushExpectations() — Method in class PendingCommand

Flush the expectations from the test case.

TestResponse::fromBaseResponse() — Method in class TestResponse

Create a new TestResponse from another response.

FileLoaderClass in namespace Illuminate\Translation
$ FileLoader#filesProperty in class FileLoader

The filesystem instance.

$ Translator#fallbackProperty in class Translator

The fallback locale used by the translator.

$ ClosureValidationRule#failedProperty in class ClosureValidationRule

Indicates if the validation callback failed.

FilterEmailValidationClass in namespace Illuminate\Validation\Concerns
$ FilterEmailValidation#flagsProperty in class FilterEmailValidation

The flags to pass to the filter_var function.

FormatsMessagesClass in namespace Illuminate\Validation\Concerns
ValidatesAttributes::failsBasicDimensionChecks() — Method in class ValidatesAttributes

Test if the given width and height fail any conditions.

ValidatesAttributes::failsRatioCheck() — Method in class ValidatesAttributes

Determine if the given parameters fail a dimension ratio check.

FactoryClass in namespace Illuminate\Validation
$ Factory#fallbackMessagesProperty in class Factory

All of the fallback messages for custom rules.

$ InvokableValidationRule#failedProperty in class InvokableValidationRule

Indicates if the validation invokable failed.

$ NotPwnedVerifier#factoryProperty in class NotPwnedVerifier

The HTTP factory instance.

Rule::forEach() — Method in class Rule

Create a new nested rule set.

Rule::file() — Method in class Rule

Get a file constraint builder instance.

DatabaseRule::formatWheres() — Method in class DatabaseRule

Format the where clauses.

FileClass in namespace Illuminate\Validation\Rules
File::fail() — Method in class File

Adds the given failures, and return false.

Password::fail() — Method in class Password

Adds the given failures, and return false.

ValidatesWhenResolvedTrait::failedValidation() — Method in class ValidatesWhenResolvedTrait

Handle a failed validation attempt.

ValidatesWhenResolvedTrait::failedAuthorization() — Method in class ValidatesWhenResolvedTrait

Handle a failed authorization attempt.

ValidationRuleParser::filterConditionalRules() — Method in class ValidationRuleParser

Expand and conditional rules in the given array of rules.

$ Validator#failedRulesProperty in class Validator

The failed validation rules.

$ Validator#fallbackMessagesProperty in class Validator

The array of fallback error messages.

$ Validator#fileRulesProperty in class Validator

The validation rules that may be applied to files.

Validator::fails() — Method in class Validator

Determine if the data fails the validation rules.

Validator::failed() — Method in class Validator

Get the failed validation rules.

$ BladeCompiler#footerProperty in class BladeCompiler

Array of footer lines to be added to the template.

$ Compiler#filesProperty in class Compiler

The filesystem instance.

ComponentTagCompiler::findClassByComponent() — Method in class ComponentTagCompiler

Find the class for the given component using the registered namespaces.

ComponentTagCompiler::formatClassName() — Method in class ComponentTagCompiler

Format the class name for the given component.

$ CompilesConditionals#firstCaseInSwitchProperty in class CompilesConditionals

Identifier for the first case in the switch statement.

$ CompilesLoops#forElseCounterProperty in class CompilesLoops

Counter to keep track of nested forelse statements.

$ Component#factoryProperty in class Component

The view factory instance, if any.

Component::factory() — Method in class Component

Get the view factory instance.

Component::flushCache() — Method in class Component

Flush the component's cached state.

Component::forgetFactory() — Method in class Component

Forget the component's factory instance.

Component::forgetComponentsResolver() — Method in class Component

Forget the component's resolver callback.

ComponentAttributeBag::first() — Method in class ComponentAttributeBag

Get the first attribute's value.

ComponentAttributeBag::filter() — Method in class ComponentAttributeBag

Filter the attributes, returning a bag of attributes that pass the filter.

ManagesComponents::flushComponents() — Method in class ManagesComponents

Flush all of the component state.

$ ManagesFragments#fragmentsProperty in class ManagesFragments

All of the captured, rendered fragments.

$ ManagesFragments#fragmentStackProperty in class ManagesFragments

The stack of in-progress fragment renders.

ManagesFragments::flushFragments() — Method in class ManagesFragments

Flush all of the fragments.

ManagesLayouts::flushSections() — Method in class ManagesLayouts

Flush all of the sections.

ManagesStacks::flushStacks() — Method in class ManagesStacks

Flush all of the stacks.

CompilerEngine::forgetCompiledOrNotExpired() — Method in class CompilerEngine

Clear the cache of views that were compiled or not expired.

EngineResolver::forget() — Method in class EngineResolver

Remove a resolved engine.

FileEngineClass in namespace Illuminate\View\Engines
$ FileEngine#filesProperty in class FileEngine

The filesystem instance.

$ PhpEngine#filesProperty in class PhpEngine

The filesystem instance.

FactoryClass in namespace Illuminate\View
$ Factory#finderProperty in class Factory

The view finder implementation.

Factory::file() — Method in class Factory

Get the evaluated view contents for the given view.

Factory::first() — Method in class Factory

Get the first view that actually exists from the given list.

Factory::flushState() — Method in class Factory

Flush all of the factory state like sections and stacks.

Factory::flushStateIfDoneRendering() — Method in class Factory

Flush all of the section contents if done rendering.

Factory::flushFinderCache() — Method in class Factory

Flush the cache of views located by the finder.

FileViewFinderClass in namespace Illuminate\View
$ FileViewFinder#filesProperty in class FileViewFinder

The filesystem instance.

FileViewFinder::find() — Method in class FileViewFinder

Get the fully qualified location of the view.

FileViewFinder::findNamespacedView() — Method in class FileViewFinder

Get the path to a template with a named path.

FileViewFinder::findInPaths() — Method in class FileViewFinder

Find the given view in the list of paths.

FileViewFinder::flush() — Method in class FileViewFinder

Flush the cache of located views.

$ View#factoryProperty in class View

The view factory instance.

View::fragment() — Method in class View

Get the evaluated contents of a given fragment.

View::fragments() — Method in class View

Get the evaluated contents for a given array of fragments.

View::fragmentIf() — Method in class View

Get the evaluated contents of a given fragment if the given condition is true.

View::fragmentsIf() — Method in class View

Get the evaluated contents for a given array of fragments if the given condition is true.

View::formatErrors() — Method in class View

Parse the given errors into an appropriate value.

ViewFinderInterface::find() — Method in class ViewFinderInterface

Get the fully qualified location of the view.

ViewFinderInterface::flush() — Method in class ViewFinderInterface

Flush the cache of located views.

G

GateEvaluatedClass in namespace Illuminate\Auth\Access\Events
GateClass in namespace Illuminate\Auth\Access
$ Gate#guessPolicyNamesUsingCallbackProperty in class Gate

The callback to be used to guess policy names.

Gate::getPolicyFor() — Method in class Gate

Get a policy instance for a given class.

Gate::guessPolicyName() — Method in class Gate

Guess the policy name for the given class.

Gate::guessPolicyNamesUsing() — Method in class Gate

Specify a callback to be used to guess policy names.

$ AuthManager#guardsProperty in class AuthManager

The array of created "drivers".

AuthManager::guard() — Method in class AuthManager

Attempt to get the guard from the local cache.

AuthManager::getConfig() — Method in class AuthManager

Get the guard configuration.

AuthManager::getDefaultDriver() — Method in class AuthManager

Get the default authentication driver name.

Authenticatable::getAuthIdentifierName() — Method in class Authenticatable

Get the name of the unique identifier for the user.

Authenticatable::getAuthIdentifier() — Method in class Authenticatable

Get the unique identifier for the user.

Authenticatable::getAuthIdentifierForBroadcasting() — Method in class Authenticatable

Get the unique broadcast identifier for the user.

Authenticatable::getAuthPassword() — Method in class Authenticatable

Get the password for the user.

Authenticatable::getRememberToken() — Method in class Authenticatable

Get the token value for the "remember me" session.

Authenticatable::getRememberTokenName() — Method in class Authenticatable

Get the column name for the "remember me" token.

$ AuthenticationException#guardsProperty in class AuthenticationException

All of the guards that were checked.

AuthenticationException::guards() — Method in class AuthenticationException

Get the guards that were checked.

CreatesUserProviders::getProviderConfiguration() — Method in class CreatesUserProviders

Get the user provider configuration.

CreatesUserProviders::getDefaultUserProvider() — Method in class CreatesUserProviders

Get the default user provider name.

DatabaseUserProvider::getGenericUser() — Method in class DatabaseUserProvider

Get the generic user.

EloquentUserProvider::getHasher() — Method in class EloquentUserProvider

Gets the hasher implementation.

EloquentUserProvider::getModel() — Method in class EloquentUserProvider

Gets the name of the Eloquent user model.

EloquentUserProvider::getQueryCallback() — Method in class EloquentUserProvider

Get the callback that modifies the query before retrieving users.

$ Attempting#guardProperty in class Attempting

The authentication guard name.

$ Authenticated#guardProperty in class Authenticated

The authentication guard name.

$ CurrentDeviceLogout#guardProperty in class CurrentDeviceLogout

The authentication guard name.

$ Failed#guardProperty in class Failed

The authentication guard name.

$ Login#guardProperty in class Login

The authentication guard name.

$ Logout#guardProperty in class Logout

The authentication guard name.

$ OtherDeviceLogout#guardProperty in class OtherDeviceLogout

The authentication guard name.

$ Validated#guardProperty in class Validated

The authentication guard name.

GenericUserClass in namespace Illuminate\Auth
GenericUser::getAuthIdentifierName() — Method in class GenericUser

Get the name of the unique identifier for the user.

GenericUser::getAuthIdentifier() — Method in class GenericUser

Get the unique identifier for the user.

GenericUser::getAuthPassword() — Method in class GenericUser

Get the password for the user.

GenericUser::getRememberToken() — Method in class GenericUser

Get the "remember me" token value.

GenericUser::getRememberTokenName() — Method in class GenericUser

Get the column name for the "remember me" token.

GuardHelpersClass in namespace Illuminate\Auth

These methods are typically the same across all guards.

GuardHelpers::guest() — Method in class GuardHelpers

Determine if the current user is a guest.

GuardHelpers::getProvider() — Method in class GuardHelpers

Get the user provider used by the guard.

$ Authorize#gateProperty in class Authorize

The gate instance.

Authorize::getGateArguments() — Method in class Authorize

Get the arguments parameter for the gate.

Authorize::getModel() — Method in class Authorize

Get the model to authorize.

MustVerifyEmail::getEmailForVerification() — Method in class MustVerifyEmail

Get the email address that should be used for verification.

CanResetPassword::getEmailForPasswordReset() — Method in class CanResetPassword

Get the e-mail address where password reset links are sent.

DatabaseTokenRepository::getPayload() — Method in class DatabaseTokenRepository

Build the record payload for the table.

DatabaseTokenRepository::getConnection() — Method in class DatabaseTokenRepository

Get the database connection instance.

DatabaseTokenRepository::getTable() — Method in class DatabaseTokenRepository

Begin a new database query against the table.

DatabaseTokenRepository::getHasher() — Method in class DatabaseTokenRepository

Get the hasher instance.

PasswordBroker::getUser() — Method in class PasswordBroker

Get the user for the given credentials.

PasswordBroker::getRepository() — Method in class PasswordBroker

Get the password reset token repository implementation.

PasswordBrokerManager::getConfig() — Method in class PasswordBrokerManager

Get the password broker configuration.

PasswordBrokerManager::getDefaultDriver() — Method in class PasswordBrokerManager

Get the default password broker name.

SessionGuard::getLastAttempted() — Method in class SessionGuard

Get the last user we attempted to authenticate.

SessionGuard::getName() — Method in class SessionGuard

Get a unique identifier for the auth session value.

SessionGuard::getRecallerName() — Method in class SessionGuard

Get the name of the cookie used to store the "recaller".

SessionGuard::getRememberDuration() — Method in class SessionGuard

Get the number of minutes the remember me cookie should be valid for.

SessionGuard::getCookieJar() — Method in class SessionGuard

Get the cookie creator instance used by the guard.

SessionGuard::getDispatcher() — Method in class SessionGuard

Get the event dispatcher instance.

SessionGuard::getSession() — Method in class SessionGuard

Get the session store used by the guard.

SessionGuard::getUser() — Method in class SessionGuard

Return the currently cached user.

SessionGuard::getRequest() — Method in class SessionGuard

Get the current request instance.

SessionGuard::getTimebox() — Method in class SessionGuard

Get the timebox instance used by the guard.

TokenGuard::getTokenForRequest() — Method in class TokenGuard

Get the token for the current request.

BroadcastEvent::getPayloadFromEvent() — Method in class BroadcastEvent

Get the payload for the given event.

BroadcastManager::get() — Method in class BroadcastManager

Attempt to get the connection from the local cache.

BroadcastManager::getConfig() — Method in class BroadcastManager

Get the connection configuration.

BroadcastManager::getDefaultDriver() — Method in class BroadcastManager

Get the default driver name.

BroadcastManager::getApplication() — Method in class BroadcastManager

Get the application instance used by the manager.

AblyBroadcaster::generateAblySignature() — Method in class AblyBroadcaster

Generate the signature needed for Ably authentication headers.

AblyBroadcaster::getPublicToken() — Method in class AblyBroadcaster

Get the public token value from the Ably key.

AblyBroadcaster::getPrivateToken() — Method in class AblyBroadcaster

Get the private token value from the Ably key.

AblyBroadcaster::getAbly() — Method in class AblyBroadcaster

Get the underlying Ably SDK instance.

Broadcaster::getChannels() — Method in class Broadcaster

Get all of the registered channels.

PusherBroadcaster::getPusher() — Method in class PusherBroadcaster

Get the Pusher SDK instance.

BatchRepository::get() — Method in class BatchRepository

Retrieve a list of batches.

DatabaseBatchRepository::get() — Method in class DatabaseBatchRepository

Retrieve a list of batches.

DatabaseBatchRepository::getConnection() — Method in class DatabaseBatchRepository

Get the underlying database connection.

Dispatcher::getCommandHandler() — Method in class Dispatcher

Retrieve the handler for a command.

UniqueLock::getKey() — Method in class UniqueLock

Generate the lock key for the given job.

ApcStore::get() — Method in class ApcStore

Retrieve an item from the cache by key.

ApcStore::getPrefix() — Method in class ApcStore

Get the cache key prefix.

ApcWrapper::get() — Method in class ApcWrapper

Get an item from the cache.

ArrayLock::getCurrentOwner() — Method in class ArrayLock

Returns the owner value written into the driver for this lock.

ArrayStore::get() — Method in class ArrayStore

Retrieve an item from the cache by key.

ArrayStore::getPrefix() — Method in class ArrayStore

Get the cache key prefix.

CacheLock::getCurrentOwner() — Method in class CacheLock

Returns the owner value written into the driver for this lock.

CacheManager::get() — Method in class CacheManager

Attempt to get the store from the local cache.

CacheManager::getPrefix() — Method in class CacheManager

Get the cache prefix.

CacheManager::getConfig() — Method in class CacheManager

Get the cache connection configuration.

CacheManager::getDefaultDriver() — Method in class CacheManager

Get the default cache driver name.

ClearCommand::getArguments() — Method in class ClearCommand

Get the console command arguments.

ClearCommand::getOptions() — Method in class ClearCommand

Get the console command options.

PruneStaleTagsCommand::getArguments() — Method in class PruneStaleTagsCommand

Get the console command arguments.

DatabaseLock::getCurrentOwner() — Method in class DatabaseLock

Returns the owner value written into the driver for this lock.

DatabaseLock::getConnectionName() — Method in class DatabaseLock

Get the name of the database connection being used to manage the lock.

DatabaseStore::get() — Method in class DatabaseStore

Retrieve an item from the cache by key.

DatabaseStore::getTime() — Method in class DatabaseStore

Get the current system time.

DatabaseStore::getConnection() — Method in class DatabaseStore

Get the underlying database connection.

DatabaseStore::getPrefix() — Method in class DatabaseStore

Get the cache key prefix.

DynamoDbLock::getCurrentOwner() — Method in class DynamoDbLock

Returns the owner value written into the driver for this lock.

DynamoDbStore::get() — Method in class DynamoDbStore

Retrieve an item from the cache by key.

DynamoDbStore::getPrefix() — Method in class DynamoDbStore

Get the cache key prefix.

DynamoDbStore::getClient() — Method in class DynamoDbStore

Get the DynamoDb Client instance.

FileStore::get() — Method in class FileStore

Retrieve an item from the cache by key.

FileStore::getPayload() — Method in class FileStore

Retrieve an item and expiry time from the cache by key.

FileStore::getFilesystem() — Method in class FileStore

Get the Filesystem instance.

FileStore::getDirectory() — Method in class FileStore

Get the working directory of the cache.

FileStore::getPrefix() — Method in class FileStore

Get the cache key prefix.

Lock::getCurrentOwner() — Method in class Lock

Returns the owner value written into the driver for this lock.

Lock::get() — Method in class Lock

Attempt to acquire the lock.

MemcachedConnector::getMemcached() — Method in class MemcachedConnector

Get a new Memcached instance.

MemcachedLock::getCurrentOwner() — Method in class MemcachedLock

Returns the owner value written into the driver for this lock.

MemcachedStore::get() — Method in class MemcachedStore

Retrieve an item from the cache by key.

MemcachedStore::getMemcached() — Method in class MemcachedStore

Get the underlying Memcached connection.

MemcachedStore::getPrefix() — Method in class MemcachedStore

Get the cache key prefix.

NoLock::getCurrentOwner() — Method in class NoLock

Returns the owner value written into the driver for this lock.

NullStore::get() — Method in class NullStore

Retrieve an item from the cache by key.

NullStore::getPrefix() — Method in class NullStore

Get the cache key prefix.

GlobalLimitClass in namespace Illuminate\Cache\RateLimiting
RedisLock::getCurrentOwner() — Method in class RedisLock

Returns the owner value written into the driver for this lock.

RedisLock::getConnectionName() — Method in class RedisLock

Get the name of the Redis connection being used to manage the lock.

RedisStore::get() — Method in class RedisStore

Retrieve an item from the cache by key.

RedisStore::getRedis() — Method in class RedisStore

Get the Redis database instance.

RedisStore::getPrefix() — Method in class RedisStore

Get the cache key prefix.

Repository::get() — Method in class Repository
Repository::getMultiple() — Method in class Repository
{@inheritdoc}
Repository::getSeconds() — Method in class Repository

Calculate the number of seconds for the given TTL.

Repository::getDefaultCacheTime() — Method in class Repository

Get the default cache time.

Repository::getStore() — Method in class Repository

Get the cache store implementation.

Repository::getEventDispatcher() — Method in class Repository

Get the event dispatcher instance.

TagSet::getNamespace() — Method in class TagSet

Get a unique namespace that changes when any of the tags are flushed.

TagSet::getNames() — Method in class TagSet

Get all of the tag names in the set.

TaggedCache::getTags() — Method in class TaggedCache

Get the tag set instance.

Repository::get() — Method in class Repository

Get the specified configuration value.

Repository::getMany() — Method in class Repository

Get many configuration values.

Application::getDefaultInputDefinition() — Method in class Application

Get the default input definition for the application.

Application::getEnvironmentOption() — Method in class Application

Get the global environment option for the definition.

Application::getLaravel() — Method in class Application

Get the Laravel application instance.

Command::getLaravel() — Method in class Command

Get the Laravel application instance.

HasParameters::getArguments() — Method in class HasParameters

Get the console command arguments.

HasParameters::getOptions() — Method in class HasParameters

Get the console command options.

InteractsWithIO::getOutput() — Method in class InteractsWithIO

Get the output implementation.

ConfirmableTrait::getDefaultConfirmCallback() — Method in class ConfirmableTrait

Get the default confirmation callback.

ContainerCommandLoader::get() — Method in class ContainerCommandLoader

Resolve a command from the container.

ContainerCommandLoader::getNames() — Method in class ContainerCommandLoader

Get the command names.

GeneratorCommandClass in namespace Illuminate\Console
GeneratorCommand::getStub() — Method in class GeneratorCommand

Get the stub file for the generator.

GeneratorCommand::getDefaultNamespace() — Method in class GeneratorCommand

Get the default namespace for the class.

GeneratorCommand::getPath() — Method in class GeneratorCommand

Get the destination class path.

GeneratorCommand::getNamespace() — Method in class GeneratorCommand

Get the full namespace for a given class, without the class name.

GeneratorCommand::getNameInput() — Method in class GeneratorCommand

Get the desired class name from the input.

GeneratorCommand::getArguments() — Method in class GeneratorCommand

Get the console command arguments.

OutputStyle::getOutput() — Method in class OutputStyle

Get the underlying Symfony output implementation.

CallbackEvent::getSummaryForDisplay() — Method in class CallbackEvent

Get the summary of the event for display.

Event::getDefaultOutput() — Method in class Event

Get the default output depending on the OS.

Event::getEmailSubject() — Method in class Event

Get the e-mail subject line for output results.

Event::getSummaryForDisplay() — Method in class Event

Get the summary of the event for display.

Event::getExpression() — Method in class Event

Get the Cron expression for the event.

Schedule::getDispatcher() — Method in class Schedule

Get the job dispatcher, if available.

ScheduleListCommand::getTerminalWidth() — Method in class ScheduleListCommand

Get the terminal width.

Signals::getHandlers() — Method in class Signals

Get the registry's handlers.

BoundMethod::getMethodDependencies() — Method in class BoundMethod

Get all dependencies for a given method.

BoundMethod::getCallReflector() — Method in class BoundMethod

Get the proper reflection instance for the given callback.

$ Container#globalBeforeResolvingCallbacksProperty in class Container

All of the global before resolving callbacks.

$ Container#globalResolvingCallbacksProperty in class Container

All of the global resolving callbacks.

$ Container#globalAfterResolvingCallbacksProperty in class Container

All of the global after resolving callbacks.

Container::getClosure() — Method in class Container

Get the Closure to be used when building a type.

Container::getReboundCallbacks() — Method in class Container

Get the rebound callbacks for a given type.

Container::get() — Method in class Container
{@inheritdoc}
Container::getConcrete() — Method in class Container

Get the concrete type for a given abstract.

Container::getContextualConcrete() — Method in class Container

Get the contextual concrete binding for the given abstract.

Container::getParameterOverride() — Method in class Container

Get a parameter override for a dependency.

Container::getLastParameterOverride() — Method in class Container

Get the last parameter override.

Container::getCallbacksForType() — Method in class Container

Get all callbacks for a given type.

Container::getBindings() — Method in class Container

Get the container's bindings.

Container::getAlias() — Method in class Container

Get the alias for an abstract if available.

Container::getExtenders() — Method in class Container

Get the extender callbacks for a given type.

Container::getInstance() — Method in class Container

Get the globally available instance of the container.

ContextualBindingBuilder::give() — Method in class ContextualBindingBuilder

Define the implementation for the contextual binding.

ContextualBindingBuilder::giveTagged() — Method in class ContextualBindingBuilder

Define tagged services to be used as the implementation for the contextual binding.

ContextualBindingBuilder::giveConfig() — Method in class ContextualBindingBuilder

Specify the configuration item to bind as a primitive.

$ RewindableGenerator#generatorProperty in class RewindableGenerator

The generator callback.

RewindableGenerator::getIterator() — Method in class RewindableGenerator

Get an iterator from the generator.

Util::getParameterClassName() — Method in class Util

Get the class name of the given parameter's type, if possible.

GateClass in namespace Illuminate\Contracts\Auth\Access
Gate::getPolicyFor() — Method in class Gate

Get a policy instance for a given class.

Authenticatable::getAuthIdentifierName() — Method in class Authenticatable

Get the name of the unique identifier for the user.

Authenticatable::getAuthIdentifier() — Method in class Authenticatable

Get the unique identifier for the user.

Authenticatable::getAuthPassword() — Method in class Authenticatable

Get the password for the user.

Authenticatable::getRememberToken() — Method in class Authenticatable

Get the token value for the "remember me" session.

Authenticatable::getRememberTokenName() — Method in class Authenticatable

Get the column name for the "remember me" token.

CanResetPassword::getEmailForPasswordReset() — Method in class CanResetPassword

Get the e-mail address where password reset links are sent.

Factory::guard() — Method in class Factory

Get a guard instance by name.

GuardClass in namespace Illuminate\Contracts\Auth
Guard::guest() — Method in class Guard

Determine if the current user is a guest.

MustVerifyEmail::getEmailForVerification() — Method in class MustVerifyEmail

Get the email address that should be used for verification.

Dispatcher::getCommandHandler() — Method in class Dispatcher

Retrieve the handler for a command.

Lock::get() — Method in class Lock

Attempt to acquire the lock.

Repository::getStore() — Method in class Repository

Get the cache store implementation.

Store::get() — Method in class Store

Retrieve an item from the cache by key.

Store::getPrefix() — Method in class Store

Get the cache key prefix.

Repository::get() — Method in class Repository

Get the specified configuration value.

ContextualBindingBuilder::give() — Method in class ContextualBindingBuilder

Define the implementation for the contextual binding.

ContextualBindingBuilder::giveTagged() — Method in class ContextualBindingBuilder

Define tagged services to be used as the implementation for the contextual binding.

ContextualBindingBuilder::giveConfig() — Method in class ContextualBindingBuilder

Specify the configuration item to bind as a primitive.

QueueingFactory::getQueuedCookies() — Method in class QueueingFactory

Get the cookies which have been queued for the next request.

CastsAttributes::get() — Method in class CastsAttributes

Transform the attribute from the underlying model values.

SupportsPartialRelations::getOneOfManySubQuery() — Method in class SupportsPartialRelations

Get the one of many inner join subselect query builder instance.

Expression::getValue() — Method in class Expression

Get the value of the expression.

Encrypter::getKey() — Method in class Encrypter

Get the encryption key that the encrypter is currently using.

Filesystem::get() — Method in class Filesystem

Get the contents of a file.

Filesystem::getVisibility() — Method in class Filesystem

Get the visibility for the given path.

Application::getLocale() — Method in class Application

Get the current application locale.

Application::getNamespace() — Method in class Application

Get the application namespace.

Application::getProviders() — Method in class Application

Get the registered service provider instances if any exist.

CachesConfiguration::getCachedConfigPath() — Method in class CachesConfiguration

Get the path to the configuration cache file.

CachesConfiguration::getCachedServicesPath() — Method in class CachesConfiguration

Get the path to the cached services.php file.

CachesRoutes::getCachedRoutesPath() — Method in class CachesRoutes

Get the path to the routes cache file.

Kernel::getApplication() — Method in class Kernel

Get the Laravel application instance.

LengthAwarePaginator::getUrlRange() — Method in class LengthAwarePaginator

Create a range of pagination URLs.

Job::getJobId() — Method in class Job

Get the job identifier.

Job::getName() — Method in class Job

Get the name of the queued job class.

Job::getConnectionName() — Method in class Job

Get the name of the connection the job belongs to.

Job::getQueue() — Method in class Job

Get the name of the queue the job belongs to.

Job::getRawBody() — Method in class Job

Get the raw body string for the job.

Queue::getConnectionName() — Method in class Queue

Get the connection name for the queue.

QueueableCollection::getQueueableClass() — Method in class QueueableCollection

Get the type of the entities being queued.

QueueableCollection::getQueueableIds() — Method in class QueueableCollection

Get the identifiers for all of the entities.

QueueableCollection::getQueueableRelations() — Method in class QueueableCollection

Get the relationships of the entities being queued.

QueueableCollection::getQueueableConnection() — Method in class QueueableCollection

Get the connection of the entities being queued.

QueueableEntity::getQueueableId() — Method in class QueueableEntity

Get the queueable identity for the entity.

QueueableEntity::getQueueableRelations() — Method in class QueueableEntity

Get the relationships for the entity.

QueueableEntity::getQueueableConnection() — Method in class QueueableEntity

Get the connection of the entity.

BindingRegistrar::getBindingCallback() — Method in class BindingRegistrar

Get the binding callback for a given binding.

Registrar::get() — Method in class Registrar

Register a new GET route with the router.

Registrar::group() — Method in class Registrar

Create a route group with shared attributes.

UrlGenerator::getRootControllerNamespace() — Method in class UrlGenerator

Get the root controller namespace.

UrlRoutable::getRouteKey() — Method in class UrlRoutable

Get the value of the model's route key.

UrlRoutable::getRouteKeyName() — Method in class UrlRoutable

Get the route key for the model.

Session::getName() — Method in class Session

Get the name of the session.

Session::getId() — Method in class Session

Get the current session ID.

Session::get() — Method in class Session

Get an item from the session.

Session::getHandler() — Method in class Session

Get the session handler instance.

MessageBag::get() — Method in class MessageBag

Get all of the messages from the bag for a given key.

MessageBag::getMessages() — Method in class MessageBag

Get the raw messages in the container.

MessageBag::getFormat() — Method in class MessageBag

Get the default message format.

MessageProvider::getMessageBag() — Method in class MessageProvider

Get the messages for the instance.

Translator::get() — Method in class Translator

Get the translation for a given key.

Translator::getLocale() — Method in class Translator

Get the default locale being used.

Engine::get() — Method in class Engine

Get the evaluated contents of the view.

View::getData() — Method in class View

Get the array of view data.

CookieJar::getPathAndDomain() — Method in class CookieJar

Get the path and domain, or the default values.

CookieJar::getQueuedCookies() — Method in class CookieJar

Get the cookies which have been queued for the next request.

Manager::getConnection() — Method in class Manager

Get a registered connection instance.

Manager::getDatabaseManager() — Method in class Manager

Get the database manager instance.

Manager::getEventDispatcher() — Method in class Manager

Get the current event dispatcher instance.

BuildsQueries::getOriginalColumnNameForCursorPagination() — Method in class BuildsQueries

Get the original column name of the given column, without any aliasing.

Connection::getDefaultQueryGrammar() — Method in class Connection

Get the default query grammar instance.

Connection::getDefaultSchemaGrammar() — Method in class Connection

Get the default schema grammar instance.

Connection::getDefaultPostProcessor() — Method in class Connection

Get the default post processor instance.

Connection::getSchemaBuilder() — Method in class Connection

Get a schema builder instance for the connection.

Connection::getPdoForSelect() — Method in class Connection

Get the PDO connection to use for a select query.

Connection::getElapsedTime() — Method in class Connection

Get the elapsed time since a given starting point.

Connection::getDoctrineColumn() — Method in class Connection

Get a Doctrine Schema Column instance.

Connection::getDoctrineSchemaManager() — Method in class Connection

Get the Doctrine DBAL schema manager for the connection.

Connection::getDoctrineConnection() — Method in class Connection

Get the Doctrine DBAL database connection instance.

Connection::getPdo() — Method in class Connection

Get the current PDO connection.

Connection::getRawPdo() — Method in class Connection

Get the current PDO connection parameter without executing any reconnect logic.

Connection::getReadPdo() — Method in class Connection

Get the current PDO connection used for reading.

Connection::getRawReadPdo() — Method in class Connection

Get the current read PDO connection parameter without executing any reconnect logic.

Connection::getName() — Method in class Connection

Get the database connection name.

Connection::getNameWithReadWriteType() — Method in class Connection

Get the database connection full name.

Connection::getConfig() — Method in class Connection

Get an option from the configuration options.

Connection::getDriverName() — Method in class Connection

Get the PDO driver name.

Connection::getQueryGrammar() — Method in class Connection

Get the query grammar used by the connection.

Connection::getSchemaGrammar() — Method in class Connection

Get the schema grammar used by the connection.

Connection::getPostProcessor() — Method in class Connection

Get the query post processor used by the connection.

Connection::getEventDispatcher() — Method in class Connection

Get the event dispatcher used by the connection.

Connection::getQueryLog() — Method in class Connection

Get the connection query log.

Connection::getDatabaseName() — Method in class Connection

Get the name of the connected database.

Connection::getTablePrefix() — Method in class Connection

Get the table prefix for the connection.

Connection::getResolver() — Method in class Connection

Get the connection resolver for the given driver.

ConnectionInterface::getDatabaseName() — Method in class ConnectionInterface

Get the name of the connected database.

ConnectionResolver::getDefaultConnection() — Method in class ConnectionResolver

Get the default connection name.

ConnectionResolverInterface::getDefaultConnection() — Method in class ConnectionResolverInterface

Get the default connection name.

ConnectionFactory::getReadConfig() — Method in class ConnectionFactory

Get the read configuration for a read / write connection.

ConnectionFactory::getWriteConfig() — Method in class ConnectionFactory

Get the write configuration for a read / write connection.

ConnectionFactory::getReadWriteConfig() — Method in class ConnectionFactory

Get a read / write level configuration.

Connector::getOptions() — Method in class Connector

Get the PDO options based on the configuration.

Connector::getDefaultOptions() — Method in class Connector

Get the default PDO connection options.

MySqlConnector::getCollation() — Method in class MySqlConnector

Get the collation for the configuration.

MySqlConnector::getDsn() — Method in class MySqlConnector

Create a DSN string from a configuration.

MySqlConnector::getSocketDsn() — Method in class MySqlConnector

Get the DSN string for a socket configuration.

MySqlConnector::getHostDsn() — Method in class MySqlConnector

Get the DSN string for a host / port configuration.

PostgresConnector::getDsn() — Method in class PostgresConnector

Create a DSN string from a configuration.

SqlServerConnector::getDsn() — Method in class SqlServerConnector

Create a DSN string from a configuration.

SqlServerConnector::getDblibDsn() — Method in class SqlServerConnector

Get the DSN string for a DbLib connection.

SqlServerConnector::getOdbcDsn() — Method in class SqlServerConnector

Get the DSN string for an ODBC connection.

SqlServerConnector::getSqlSrvDsn() — Method in class SqlServerConnector

Get the DSN string for a SqlSrv connection.

SqlServerConnector::getAvailableDrivers() — Method in class SqlServerConnector

Get the available PDO drivers.

DatabaseInspectionCommand::getPlatformName() — Method in class DatabaseInspectionCommand

Get a human-readable platform name for the given platform.

DatabaseInspectionCommand::getTableSize() — Method in class DatabaseInspectionCommand

Get the size of a table in bytes.

DatabaseInspectionCommand::getMySQLTableSize() — Method in class DatabaseInspectionCommand

Get the size of a MySQL table in bytes.

DatabaseInspectionCommand::getPostgresTableSize() — Method in class DatabaseInspectionCommand

Get the size of a Postgres table in bytes.

DatabaseInspectionCommand::getSqliteTableSize() — Method in class DatabaseInspectionCommand

Get the size of a SQLite table in bytes.

DatabaseInspectionCommand::getConnectionCount() — Method in class DatabaseInspectionCommand

Get the number of open connections for a database.

DatabaseInspectionCommand::getConfigFromDatabase() — Method in class DatabaseInspectionCommand

Get the connection configuration details for the given connection.

DbCommand::getConnection() — Method in class DbCommand

Get the database connection configuration.

DbCommand::getCommand() — Method in class DbCommand

Get the database client command to run.

DbCommand::getMysqlArguments() — Method in class DbCommand

Get the arguments for the MySQL CLI.

DbCommand::getPgsqlArguments() — Method in class DbCommand

Get the arguments for the Postgres CLI.

DbCommand::getSqliteArguments() — Method in class DbCommand

Get the arguments for the SQLite CLI.

DbCommand::getSqlsrvArguments() — Method in class DbCommand

Get the arguments for the SQL Server CLI.

DbCommand::getPgsqlEnvironment() — Method in class DbCommand

Get the environment variables for the Postgres CLI.

DbCommand::getOptionalArguments() — Method in class DbCommand

Get the optional arguments based on the connection configuration.

FactoryMakeCommand::getStub() — Method in class FactoryMakeCommand

Get the stub file for the generator.

FactoryMakeCommand::getPath() — Method in class FactoryMakeCommand

Get the destination class path.

FactoryMakeCommand::guessModelName() — Method in class FactoryMakeCommand

Guess the model name from the Factory name or return a default model name.

FactoryMakeCommand::getOptions() — Method in class FactoryMakeCommand

Get the console command options.

BaseCommand::getMigrationPaths() — Method in class BaseCommand

Get all of the migration paths.

BaseCommand::getMigrationPath() — Method in class BaseCommand

Get the path to the migration directory.

FreshCommand::getOptions() — Method in class FreshCommand

Get the console command options.

InstallCommand::getOptions() — Method in class InstallCommand

Get the console command options.

MigrateMakeCommand::getMigrationPath() — Method in class MigrateMakeCommand

Get migration path (either specified by '--path' option or default location).

RefreshCommand::getOptions() — Method in class RefreshCommand

Get the console command options.

ResetCommand::getOptions() — Method in class ResetCommand

Get the console command options.

RollbackCommand::getOptions() — Method in class RollbackCommand

Get the console command options.

StatusCommand::getStatusFor() — Method in class StatusCommand

Get the status for the given run migrations.

StatusCommand::getAllMigrationFiles() — Method in class StatusCommand

Get an array of all of the migration files.

StatusCommand::getOptions() — Method in class StatusCommand

Get the console command options.

TableGuesser::guess() — Method in class TableGuesser

Attempt to guess the table name and "creation" status of the given migration.

PruneCommand::getDefaultPath() — Method in class PruneCommand

Get the default path where models are located.

SeedCommand::getSeeder() — Method in class SeedCommand

Get a seeder instance from the container.

SeedCommand::getDatabase() — Method in class SeedCommand

Get the name of the database connection to use.

SeedCommand::getArguments() — Method in class SeedCommand

Get the console command arguments.

SeedCommand::getOptions() — Method in class SeedCommand

Get the console command options.

SeederMakeCommand::getStub() — Method in class SeederMakeCommand

Get the stub file for the generator.

SeederMakeCommand::getPath() — Method in class SeederMakeCommand

Get the destination class path.

ShowModelCommand::getPolicy() — Method in class ShowModelCommand

Get the first policy associated with this model.

ShowModelCommand::getAttributes() — Method in class ShowModelCommand

Get the column attributes for the given model.

ShowModelCommand::getVirtualAttributes() — Method in class ShowModelCommand

Get the virtual (non-column) attributes for the given model.

ShowModelCommand::getRelations() — Method in class ShowModelCommand

Get the relations from the given model.

ShowModelCommand::getObservers() — Method in class ShowModelCommand

Get the Observers watching this model.

ShowModelCommand::getCastType() — Method in class ShowModelCommand

Get the cast type for the given column.

ShowModelCommand::getCastsWithDates() — Method in class ShowModelCommand

Get the model casts, including any date casts.

ShowModelCommand::getColumnType() — Method in class ShowModelCommand

Get the type of the given column.

ShowModelCommand::getColumnDefault() — Method in class ShowModelCommand

Get the default value for the given column.

TableCommand::getAttributesForColumn() — Method in class TableCommand

Get the attributes for a table column.

TableCommand::getAttributesForIndex() — Method in class TableCommand

Get the attributes for a table index.

WipeCommand::getOptions() — Method in class WipeCommand

Get the console command options.

TimestampType::getSQLDeclaration() — Method in class TimestampType
{@inheritdoc}
TimestampType::getMySqlPlatformSQLDeclaration() — Method in class TimestampType

Get the SQL declaration for MySQL.

TimestampType::getPostgresPlatformSQLDeclaration() — Method in class TimestampType

Get the SQL declaration for PostgreSQL.

TimestampType::getSqlServerPlatformSQLDeclaration() — Method in class TimestampType

Get the SQL declaration for SQL Server.

TimestampType::getName() — Method in class TimestampType
{@inheritdoc}
DatabaseManager::getDefaultConnection() — Method in class DatabaseManager

Get the default connection name.

DatabaseManager::getConnections() — Method in class DatabaseManager

Return all of the created connections.

DatabaseTransactionRecord::getCallbacks() — Method in class DatabaseTransactionRecord

Get all of the callbacks.

DatabaseTransactionsManager::getTransactions() — Method in class DatabaseTransactionsManager

Get all the transactions.

Builder::get() — Method in class Builder

Execute the query as a "select" statement.

Builder::getModels() — Method in class Builder

Get the hydrated models without eager loading.

Builder::getRelation() — Method in class Builder

Get the relation instance for the given relation name.

Builder::groupWhereSliceForScope() — Method in class Builder

Slice where conditions at the given offset and add them to the query as a nested condition.

Builder::getQuery() — Method in class Builder

Get the underlying query builder instance.

Builder::getEagerLoads() — Method in class Builder

Get the relationships being eagerly loaded.

Builder::getModel() — Method in class Builder

Get the model instance being queried.

Builder::getMacro() — Method in class Builder

Get the given macro by name.

Builder::getGlobalMacro() — Method in class Builder

Get the given global macro by name.

AsArrayObject::get() — Method in class AsArrayObject
AsCollection::get() — Method in class AsCollection
AsEncryptedArrayObject::get() — Method in class AsEncryptedArrayObject
AsEncryptedCollection::get() — Method in class AsEncryptedCollection
AsEnumArrayObject::get() — Method in class AsEnumArrayObject
AsEnumArrayObject::getStorableEnumValue() — Method in class AsEnumArrayObject
AsEnumCollection::get() — Method in class AsEnumCollection
AsEnumCollection::getStorableEnumValue() — Method in class AsEnumCollection
AsStringable::get() — Method in class AsStringable
$ Attribute#getProperty in class Attribute

The attribute accessor.

Attribute::get() — Method in class Attribute

Create a new attribute accessor.

Collection::getDictionary() — Method in class Collection

Get a dictionary keyed by primary keys.

Collection::getQueueableClass() — Method in class Collection

Get the type of the entities being queued.

Collection::getQueueableModelClass() — Method in class Collection

Get the queueable class name for the given model.

Collection::getQueueableIds() — Method in class Collection

Get the identifiers for all of the entities.

Collection::getQueueableRelations() — Method in class Collection

Get the relationships of the entities being queued.

Collection::getQueueableConnection() — Method in class Collection

Get the connection of the entities being queued.

GuardsAttributesClass in namespace Illuminate\Database\Eloquent\Concerns
$ GuardsAttributes#guardedProperty in class GuardsAttributes

The attributes that aren't mass assignable.

$ GuardsAttributes#guardableColumnsProperty in class GuardsAttributes

The actual columns that exist on the database and can be guarded.

GuardsAttributes::getFillable() — Method in class GuardsAttributes

Get the fillable attributes for the model.

GuardsAttributes::getGuarded() — Method in class GuardsAttributes

Get the guarded attributes for the model.

GuardsAttributes::guard() — Method in class GuardsAttributes

Set the guarded attributes for the model.

$ HasAttributes#getAttributeMutatorCacheProperty in class HasAttributes

The cache of the "Attribute" return type marked mutated, gettable attributes for each class.

HasAttributes::getArrayableAttributes() — Method in class HasAttributes

Get an attribute array of all arrayable attributes.

HasAttributes::getArrayableAppends() — Method in class HasAttributes

Get all of the appendable values that are arrayable.

HasAttributes::getArrayableRelations() — Method in class HasAttributes

Get an attribute array of all arrayable relations.

HasAttributes::getArrayableItems() — Method in class HasAttributes

Get an attribute array of all arrayable values.

HasAttributes::getAttribute() — Method in class HasAttributes

Get an attribute from the model.

HasAttributes::getAttributeValue() — Method in class HasAttributes

Get a plain attribute (not a relationship).

HasAttributes::getAttributeFromArray() — Method in class HasAttributes

Get an attribute from the $attributes array.

HasAttributes::getRelationValue() — Method in class HasAttributes

Get a relationship.

HasAttributes::getRelationshipFromMethod() — Method in class HasAttributes

Get a relationship value from a method.

HasAttributes::getClassCastableAttributeValue() — Method in class HasAttributes

Cast the given attribute using a custom cast class.

HasAttributes::getEnumCastableAttributeValue() — Method in class HasAttributes

Cast the given attribute to an enum.

HasAttributes::getCastType() — Method in class HasAttributes

Get the type of cast for a model attribute.

HasAttributes::getEnumCaseFromValue() — Method in class HasAttributes

Get an enum case instance from a given class and value.

HasAttributes::getStorableEnumValue() — Method in class HasAttributes

Get the storable value from the given enum.

HasAttributes::getArrayAttributeWithValue() — Method in class HasAttributes

Get an array attribute with the given key and value set.

HasAttributes::getArrayAttributeByKey() — Method in class HasAttributes

Get an array attribute or return an empty array if it is not set.

HasAttributes::getDates() — Method in class HasAttributes

Get the attributes that should be converted to dates.

HasAttributes::getDateFormat() — Method in class HasAttributes

Get the format for database stored dates.

HasAttributes::getCasts() — Method in class HasAttributes

Get the casts array.

HasAttributes::getAttributes() — Method in class HasAttributes

Get all of the current attributes on the model.

HasAttributes::getAttributesForInsert() — Method in class HasAttributes

Get all of the current attributes on the model for an insert operation.

HasAttributes::getOriginal() — Method in class HasAttributes

Get the model's original attribute values.

HasAttributes::getOriginalWithoutRewindingModel() — Method in class HasAttributes

Get the model's original attribute values.

HasAttributes::getRawOriginal() — Method in class HasAttributes

Get the model's raw original attribute values.

HasAttributes::getDirty() — Method in class HasAttributes

Get the attributes that have been changed since the last sync.

HasAttributes::getChanges() — Method in class HasAttributes

Get the attributes that were changed when the model was last saved.

HasAttributes::getAppends() — Method in class HasAttributes

Get the accessors that are being appended to model arrays.

HasAttributes::getMutatedAttributes() — Method in class HasAttributes

Get the mutated attributes for a given instance.

HasAttributes::getMutatorMethods() — Method in class HasAttributes

Get all of the attribute mutator methods.

HasAttributes::getAttributeMarkedMutatorMethods() — Method in class HasAttributes

Get all of the "Attribute" return typed attribute mutator methods.

HasEvents::getObservableEvents() — Method in class HasEvents

Get the observable event names.

HasEvents::getEventDispatcher() — Method in class HasEvents

Get the event dispatcher instance.

HasGlobalScopes::getGlobalScope() — Method in class HasGlobalScopes

Get a global scope registered with the model.

HasGlobalScopes::getGlobalScopes() — Method in class HasGlobalScopes

Get the global scopes for this class instance.

HasRelationships::getActualClassNameForMorph() — Method in class HasRelationships

Retrieve the actual class name for a given morph class.

HasRelationships::guessBelongsToRelation() — Method in class HasRelationships

Guess the "belongs to" relationship name.

HasRelationships::guessBelongsToManyRelation() — Method in class HasRelationships

Get the relationship name of the belongsToMany relationship.

HasRelationships::getMorphs() — Method in class HasRelationships

Get the polymorphic relationship columns.

HasRelationships::getMorphClass() — Method in class HasRelationships

Get the class name for polymorphic relations.

HasRelationships::getRelations() — Method in class HasRelationships

Get all the loaded relations for the instance.

HasRelationships::getRelation() — Method in class HasRelationships

Get a specified relationship.

HasRelationships::getTouchedRelations() — Method in class HasRelationships

Get the relationships that are touched on save.

HasTimestamps::getCreatedAtColumn() — Method in class HasTimestamps

Get the name of the "created at" column.

HasTimestamps::getUpdatedAtColumn() — Method in class HasTimestamps

Get the name of the "updated at" column.

HasTimestamps::getQualifiedCreatedAtColumn() — Method in class HasTimestamps

Get the fully qualified "created at" column.

HasTimestamps::getQualifiedUpdatedAtColumn() — Method in class HasTimestamps

Get the fully qualified "updated at" column.

HasUlids::getKeyType() — Method in class HasUlids

Get the auto-incrementing key type.

HasUlids::getIncrementing() — Method in class HasUlids

Get the value indicating whether the IDs are incrementing.

HasUuids::getKeyType() — Method in class HasUuids

Get the auto-incrementing key type.

HasUuids::getIncrementing() — Method in class HasUuids

Get the value indicating whether the IDs are incrementing.

HidesAttributes::getHidden() — Method in class HidesAttributes

Get the hidden attributes for the model.

HidesAttributes::getVisible() — Method in class HidesAttributes

Get the visible attributes for the model.

QueriesRelationships::getBelongsToRelation() — Method in class QueriesRelationships

Get the BelongsTo relationship for a single polymorphic type.

QueriesRelationships::getRelationHashedColumn() — Method in class QueriesRelationships

Get the relation hashed column name for the given column and relation.

QueriesRelationships::getRelationWithoutConstraints() — Method in class QueriesRelationships

Get the "has relation" base query instance.

Factory::getExpandedAttributes() — Method in class Factory

Get a raw attributes array for the model.

Factory::getRawAttributes() — Method in class Factory

Get the raw attributes for the model as an array.

Factory::guessRelationship() — Method in class Factory

Attempt to guess the relationship name for a "has" relationship.

Factory::getRandomRecycledModel() — Method in class Factory

Retrieve a random model of a given type from previously provided models to recycle.

Factory::guessModelNamesUsing() — Method in class Factory

Specify the callback that should be invoked to guess model names based on factory names.

Factory::guessFactoryNamesUsing() — Method in class Factory

Specify the callback that should be invoked to guess factory names based on dynamic relationship names.

$ Model#globalScopesProperty in class Model

The array of global scopes on the model.

Model::getKeyForSelectQuery() — Method in class Model

Get the primary key value for a select query.

Model::getKeyForSaveQuery() — Method in class Model

Get the primary key value for a save query.

Model::getConnection() — Method in class Model

Get the database connection for the model.

Model::getConnectionName() — Method in class Model

Get the current connection name for the model.

Model::getConnectionResolver() — Method in class Model

Get the connection resolver instance.

Model::getTable() — Method in class Model

Get the table associated with the model.

Model::getKeyName() — Method in class Model

Get the primary key for the model.

Model::getQualifiedKeyName() — Method in class Model

Get the table qualified key name.

Model::getKeyType() — Method in class Model

Get the auto-incrementing key type.

Model::getIncrementing() — Method in class Model

Get the value indicating whether the IDs are incrementing.

Model::getKey() — Method in class Model

Get the value of the model's primary key.

Model::getQueueableId() — Method in class Model

Get the queueable identity for the entity.

Model::getQueueableRelations() — Method in class Model

Get the queueable relationships for the entity.

Model::getQueueableConnection() — Method in class Model

Get the queueable connection for the entity.

Model::getRouteKey() — Method in class Model

Get the value of the model's route key.

Model::getRouteKeyName() — Method in class Model

Get the route key for the model.

Model::getForeignKey() — Method in class Model

Get the default foreign key name for the model.

Model::getPerPage() — Method in class Model

Get the number of models to return per page.

ModelNotFoundException::getModel() — Method in class ModelNotFoundException

Get the affected Eloquent model.

ModelNotFoundException::getIds() — Method in class ModelNotFoundException

Get the affected Eloquent model IDs.

BelongsTo::getResults() — Method in class BelongsTo

Get the results of the relationship.

BelongsTo::getEagerModelKeys() — Method in class BelongsTo

Gather the keys from an array of related models.

BelongsTo::getRelationExistenceQuery() — Method in class BelongsTo

Add the constraints for a relationship query.

BelongsTo::getRelationExistenceQueryForSelfRelation() — Method in class BelongsTo

Add the constraints for a relationship query on the same table.

BelongsTo::getChild() — Method in class BelongsTo

Get the child of the relationship.

BelongsTo::getForeignKeyName() — Method in class BelongsTo

Get the foreign key of the relationship.

BelongsTo::getQualifiedForeignKeyName() — Method in class BelongsTo

Get the fully qualified foreign key of the relationship.

BelongsTo::getParentKey() — Method in class BelongsTo

Get the key value of the child's foreign key.

BelongsTo::getOwnerKeyName() — Method in class BelongsTo

Get the associated key of the relationship.

BelongsTo::getQualifiedOwnerKeyName() — Method in class BelongsTo

Get the fully qualified associated key of the relationship.

BelongsTo::getRelatedKeyFrom() — Method in class BelongsTo

Get the value of the model's associated key.

BelongsTo::getRelationName() — Method in class BelongsTo

Get the name of the relationship.

BelongsToMany::getPivotClass() — Method in class BelongsToMany

Get the class being used for pivot models.

BelongsToMany::getResults() — Method in class BelongsToMany

Get the results of the relationship.

BelongsToMany::get() — Method in class BelongsToMany

Execute the query as a "select" statement.

BelongsToMany::guessInverseRelation() — Method in class BelongsToMany

Attempt to guess the name of the inverse of the relation.

BelongsToMany::getRelationExistenceQuery() — Method in class BelongsToMany

Add the constraints for a relationship query.

BelongsToMany::getRelationExistenceQueryForSelfJoin() — Method in class BelongsToMany

Add the constraints for a relationship query on the same table.

BelongsToMany::getExistenceCompareKey() — Method in class BelongsToMany

Get the key for comparing against the parent key in "has" query.

BelongsToMany::getForeignPivotKeyName() — Method in class BelongsToMany

Get the foreign key for the relation.

BelongsToMany::getQualifiedForeignPivotKeyName() — Method in class BelongsToMany

Get the fully qualified foreign key for the relation.

BelongsToMany::getRelatedPivotKeyName() — Method in class BelongsToMany

Get the "related key" for the relation.

BelongsToMany::getQualifiedRelatedPivotKeyName() — Method in class BelongsToMany

Get the fully qualified "related key" for the relation.

BelongsToMany::getParentKeyName() — Method in class BelongsToMany

Get the parent key for the relationship.

BelongsToMany::getQualifiedParentKeyName() — Method in class BelongsToMany

Get the fully qualified parent key name for the relation.

BelongsToMany::getRelatedKeyName() — Method in class BelongsToMany

Get the related key for the relationship.

BelongsToMany::getQualifiedRelatedKeyName() — Method in class BelongsToMany

Get the fully qualified related key name for the relation.

BelongsToMany::getTable() — Method in class BelongsToMany

Get the intermediate table for the relationship.

BelongsToMany::getRelationName() — Method in class BelongsToMany

Get the relationship name for the relationship.

BelongsToMany::getPivotAccessor() — Method in class BelongsToMany

Get the name of the pivot accessor for this relationship.

BelongsToMany::getPivotColumns() — Method in class BelongsToMany

Get the pivot columns for this relationship.

AsPivot::getDeleteQuery() — Method in class AsPivot

Get the query builder for a delete operation on the pivot.

AsPivot::getTable() — Method in class AsPivot

Get the table associated with the model.

AsPivot::getForeignKey() — Method in class AsPivot

Get the foreign key column name.

AsPivot::getRelatedKey() — Method in class AsPivot

Get the "related key" column name.

AsPivot::getOtherKey() — Method in class AsPivot

Get the "related key" column name.

AsPivot::getCreatedAtColumn() — Method in class AsPivot

Get the name of the "created at" column.

AsPivot::getUpdatedAtColumn() — Method in class AsPivot

Get the name of the "updated at" column.

AsPivot::getQueueableId() — Method in class AsPivot

Get the queueable identity for the entity.

CanBeOneOfMany::getOneOfManySubQuerySelectColumns() — Method in class CanBeOneOfMany

Get the columns the determine the relationship groups.

CanBeOneOfMany::getDefaultOneOfManyJoinAlias() — Method in class CanBeOneOfMany

Get the default alias for the one of many inner join clause.

CanBeOneOfMany::getRelationQuery() — Method in class CanBeOneOfMany

Get the query builder that will contain the relationship constraints.

CanBeOneOfMany::getOneOfManySubQuery() — Method in class CanBeOneOfMany

Get the one of many inner join subselect builder instance.

CanBeOneOfMany::guessRelationship() — Method in class CanBeOneOfMany

Guess the "hasOne" relationship's name via backtrace.

CanBeOneOfMany::getRelationName() — Method in class CanBeOneOfMany

Get the name of the relationship.

ComparesRelatedModels::getParentKey() — Method in class ComparesRelatedModels

Get the value of the parent model's key.

ComparesRelatedModels::getRelatedKeyFrom() — Method in class ComparesRelatedModels

Get the value of the model's related key.

InteractsWithDictionary::getDictionaryKey() — Method in class InteractsWithDictionary

Get a dictionary key attribute - casting it to a string if necessary.

InteractsWithPivotTable::getCurrentlyAttachedPivots() — Method in class InteractsWithPivotTable

Get the pivot models that are currently attached.

InteractsWithPivotTable::getTypeSwapValue() — Method in class InteractsWithPivotTable

Converts a given value to a given type value.

SupportsDefaultModels::getDefaultFor() — Method in class SupportsDefaultModels

Get the default value for this relation.

HasMany::getResults() — Method in class HasMany

Get the results of the relationship.

HasManyThrough::getQualifiedParentKeyName() — Method in class HasManyThrough

Get the fully qualified parent key name.

HasManyThrough::getResults() — Method in class HasManyThrough

Get the results of the relationship.

HasManyThrough::get() — Method in class HasManyThrough

Execute the query as a "select" statement.

HasManyThrough::getRelationExistenceQuery() — Method in class HasManyThrough

Add the constraints for a relationship query.

HasManyThrough::getRelationExistenceQueryForSelfRelation() — Method in class HasManyThrough

Add the constraints for a relationship query on the same table.

HasManyThrough::getRelationExistenceQueryForThroughSelfRelation() — Method in class HasManyThrough

Add the constraints for a relationship query on the same table as the through parent.

HasManyThrough::getQualifiedFarKeyName() — Method in class HasManyThrough

Get the qualified foreign key on the related model.

HasManyThrough::getFirstKeyName() — Method in class HasManyThrough

Get the foreign key on the "through" model.

HasManyThrough::getQualifiedFirstKeyName() — Method in class HasManyThrough

Get the qualified foreign key on the "through" model.

HasManyThrough::getForeignKeyName() — Method in class HasManyThrough

Get the foreign key on the related model.

HasManyThrough::getQualifiedForeignKeyName() — Method in class HasManyThrough

Get the qualified foreign key on the related model.

HasManyThrough::getLocalKeyName() — Method in class HasManyThrough

Get the local key on the far parent model.

HasManyThrough::getQualifiedLocalKeyName() — Method in class HasManyThrough

Get the qualified local key on the far parent model.

HasManyThrough::getSecondLocalKeyName() — Method in class HasManyThrough

Get the local key on the intermediary model.

HasOne::getResults() — Method in class HasOne

Get the results of the relationship.

HasOne::getRelationExistenceQuery() — Method in class HasOne

Add the constraints for an internal relationship existence query.

HasOne::getOneOfManySubQuerySelectColumns() — Method in class HasOne

Get the columns that should be selected by the one of many subquery.

HasOne::getRelatedKeyFrom() — Method in class HasOne

Get the value of the model's foreign key.

HasOneOrMany::getRelationValue() — Method in class HasOneOrMany

Get the value of a relationship by one or many type.

HasOneOrMany::getRelationExistenceQuery() — Method in class HasOneOrMany

Add the constraints for a relationship query.

HasOneOrMany::getRelationExistenceQueryForSelfRelation() — Method in class HasOneOrMany

Add the constraints for a relationship query on the same table.

HasOneOrMany::getExistenceCompareKey() — Method in class HasOneOrMany

Get the key for comparing against the parent key in "has" query.

HasOneOrMany::getParentKey() — Method in class HasOneOrMany

Get the key value of the parent's local key.

HasOneOrMany::getQualifiedParentKeyName() — Method in class HasOneOrMany

Get the fully qualified parent key name.

HasOneOrMany::getForeignKeyName() — Method in class HasOneOrMany

Get the plain foreign key.

HasOneOrMany::getQualifiedForeignKeyName() — Method in class HasOneOrMany

Get the foreign key for the relationship.

HasOneOrMany::getLocalKeyName() — Method in class HasOneOrMany

Get the local key for the relationship.

HasOneThrough::getResults() — Method in class HasOneThrough

Get the results of the relationship.

MorphMany::getResults() — Method in class MorphMany

Get the results of the relationship.

MorphOne::getResults() — Method in class MorphOne

Get the results of the relationship.

MorphOne::getRelationExistenceQuery() — Method in class MorphOne

Get the relationship query.

MorphOne::getOneOfManySubQuerySelectColumns() — Method in class MorphOne

Get the columns that should be selected by the one of many subquery.

MorphOne::getRelatedKeyFrom() — Method in class MorphOne

Get the value of the model's foreign key.

MorphOneOrMany::getRelationExistenceQuery() — Method in class MorphOneOrMany

Get the relationship query.

MorphOneOrMany::getQualifiedMorphType() — Method in class MorphOneOrMany

Get the foreign key "type" name.

MorphOneOrMany::getMorphType() — Method in class MorphOneOrMany

Get the plain morph type name without the table.

MorphOneOrMany::getMorphClass() — Method in class MorphOneOrMany

Get the class name of the parent model.

MorphPivot::getMorphType() — Method in class MorphPivot

Get the morph type for the pivot.

MorphPivot::getQueueableId() — Method in class MorphPivot

Get the queueable identity for the entity.

MorphTo::getEager() — Method in class MorphTo

Get the results of the relationship.

MorphTo::getResultsByType() — Method in class MorphTo

Get all of the relation results for a type.

MorphTo::gatherKeysByType() — Method in class MorphTo

Gather all of the foreign keys for a given type.

MorphTo::getMorphType() — Method in class MorphTo

Get the foreign key "type" name.

MorphTo::getDictionary() — Method in class MorphTo

Get the dictionary used by the relationship.

MorphToMany::getRelationExistenceQuery() — Method in class MorphToMany

Add the constraints for a relationship count query.

MorphToMany::getCurrentlyAttachedPivots() — Method in class MorphToMany

Get the pivot models that are currently attached.

MorphToMany::getMorphType() — Method in class MorphToMany

Get the foreign key "type" name.

MorphToMany::getMorphClass() — Method in class MorphToMany

Get the class name of the parent model.

MorphToMany::getInverse() — Method in class MorphToMany

Get the indicator for a reverse relationship.

$ Pivot#guardedProperty in class Pivot

The attributes that aren't mass assignable.

Relation::getResults() — Method in class Relation

Get the results of the relationship.

Relation::getEager() — Method in class Relation

Get the relationship for eager loading.

Relation::get() — Method in class Relation

Execute the query as a "select" statement.

Relation::getRelationExistenceCountQuery() — Method in class Relation

Add the constraints for a relationship count query.

Relation::getRelationExistenceQuery() — Method in class Relation

Add the constraints for an internal relationship existence query.

Relation::getRelationCountHash() — Method in class Relation

Get a relationship join table hash.

Relation::getKeys() — Method in class Relation

Get all of the primary keys for an array of models.

Relation::getRelationQuery() — Method in class Relation

Get the query builder that will contain the relationship constraints.

Relation::getQuery() — Method in class Relation

Get the underlying query for the relation.

Relation::getBaseQuery() — Method in class Relation

Get the base query builder driving the Eloquent builder.

Relation::getParent() — Method in class Relation

Get the parent model of the relation.

Relation::getQualifiedParentKeyName() — Method in class Relation

Get the fully qualified parent key name.

Relation::getRelated() — Method in class Relation

Get the related model of the relation.

Relation::getMorphedModel() — Method in class Relation

Get the model associated with a custom polymorphic type.

SoftDeletes::getDeletedAtColumn() — Method in class SoftDeletes

Get the name of the "deleted at" column.

SoftDeletes::getQualifiedDeletedAtColumn() — Method in class SoftDeletes

Get the fully qualified "deleted at" column.

SoftDeletingScope::getDeletedAtColumn() — Method in class SoftDeletingScope

Get the "deleted at" column for the builder.

GrammarClass in namespace Illuminate\Database
Grammar::getValue() — Method in class Grammar

Transforms expressions to their scalar types.

Grammar::getDateFormat() — Method in class Grammar

Get the format for database stored dates.

Grammar::getTablePrefix() — Method in class Grammar

Get the grammar's table prefix.

DatabaseMigrationRepository::getRan() — Method in class DatabaseMigrationRepository

Get the completed migrations.

DatabaseMigrationRepository::getMigrations() — Method in class DatabaseMigrationRepository

Get the list of migrations.

DatabaseMigrationRepository::getMigrationsByBatch() — Method in class DatabaseMigrationRepository

Get the list of the migrations by batch number.

DatabaseMigrationRepository::getLast() — Method in class DatabaseMigrationRepository

Get the last migration batch.

DatabaseMigrationRepository::getMigrationBatches() — Method in class DatabaseMigrationRepository

Get the completed migrations with their batch numbers.

DatabaseMigrationRepository::getNextBatchNumber() — Method in class DatabaseMigrationRepository

Get the next migration batch number.

DatabaseMigrationRepository::getLastBatchNumber() — Method in class DatabaseMigrationRepository

Get the last migration batch number.

DatabaseMigrationRepository::getConnectionResolver() — Method in class DatabaseMigrationRepository

Get the connection resolver instance.

DatabaseMigrationRepository::getConnection() — Method in class DatabaseMigrationRepository

Resolve the database connection instance.

Migration::getConnection() — Method in class Migration

Get the migration connection name.

MigrationCreator::getStub() — Method in class MigrationCreator

Get the migration stub file.

MigrationCreator::getClassName() — Method in class MigrationCreator

Get the class name of a migration name.

MigrationCreator::getPath() — Method in class MigrationCreator

Get the full path to the migration.

MigrationCreator::getDatePrefix() — Method in class MigrationCreator

Get the date prefix for the migration.

MigrationCreator::getFilesystem() — Method in class MigrationCreator

Get the filesystem instance.

MigrationRepositoryInterface::getRan() — Method in class MigrationRepositoryInterface

Get the completed migrations.

MigrationRepositoryInterface::getMigrations() — Method in class MigrationRepositoryInterface

Get the list of migrations.

MigrationRepositoryInterface::getMigrationsByBatch() — Method in class MigrationRepositoryInterface

Get the list of the migrations by batch.

MigrationRepositoryInterface::getLast() — Method in class MigrationRepositoryInterface

Get the last migration batch.

MigrationRepositoryInterface::getMigrationBatches() — Method in class MigrationRepositoryInterface

Get the completed migrations with their batch numbers.

MigrationRepositoryInterface::getNextBatchNumber() — Method in class MigrationRepositoryInterface

Get the next migration batch number.

Migrator::getMigrationsForRollback() — Method in class Migrator

Get the migrations for a rollback operation.

Migrator::getQueries() — Method in class Migrator

Get all of the queries that would be run for a migration.

Migrator::getMigrationClass() — Method in class Migrator

Generate a migration class name based on the migration file name.

Migrator::getMigrationFiles() — Method in class Migrator

Get all of the migration files in a given path.

Migrator::getMigrationName() — Method in class Migrator

Get the name of the migration.

Migrator::getConnection() — Method in class Migrator

Get the default connection name.

Migrator::getSchemaGrammar() — Method in class Migrator

Get the schema grammar out of a migration connection.

Migrator::getRepository() — Method in class Migrator

Get the migration repository instance.

Migrator::getFilesystem() — Method in class Migrator

Get the file system instance.

MultipleRecordsFoundException::getCount() — Method in class MultipleRecordsFoundException

Get the number of records found.

MySqlConnection::getDefaultQueryGrammar() — Method in class MySqlConnection

Get the default query grammar instance.

MySqlConnection::getSchemaBuilder() — Method in class MySqlConnection

Get a schema builder instance for the connection.

MySqlConnection::getDefaultSchemaGrammar() — Method in class MySqlConnection

Get the default schema grammar instance.

MySqlConnection::getSchemaState() — Method in class MySqlConnection

Get the schema state for the connection.

MySqlConnection::getDefaultPostProcessor() — Method in class MySqlConnection

Get the default post processor instance.

MySqlConnection::getDoctrineDriver() — Method in class MySqlConnection

Get the Doctrine DBAL driver.

Connection::getServerVersion() — Method in class Connection

Get the server version for the connection.

Connection::getWrappedConnection() — Method in class Connection

Get the wrapped PDO connection.

MySqlDriver::getName() — Method in class MySqlDriver
{@inheritdoc}
PostgresDriver::getName() — Method in class PostgresDriver
{@inheritdoc}
SQLiteDriver::getName() — Method in class SQLiteDriver
{@inheritdoc}
SqlServerConnection::getServerVersion() — Method in class SqlServerConnection

Get the server version for the connection.

SqlServerConnection::getWrappedConnection() — Method in class SqlServerConnection

Get the wrapped PDO connection.

SqlServerDriver::getName() — Method in class SqlServerDriver
{@inheritdoc}
PostgresConnection::getDefaultQueryGrammar() — Method in class PostgresConnection

Get the default query grammar instance.

PostgresConnection::getSchemaBuilder() — Method in class PostgresConnection

Get a schema builder instance for the connection.

PostgresConnection::getDefaultSchemaGrammar() — Method in class PostgresConnection

Get the default schema grammar instance.

PostgresConnection::getSchemaState() — Method in class PostgresConnection

Get the schema state for the connection.

PostgresConnection::getDefaultPostProcessor() — Method in class PostgresConnection

Get the default post processor instance.

PostgresConnection::getDoctrineDriver() — Method in class PostgresConnection

Get the Doctrine DBAL driver.

QueryException::getConnectionName() — Method in class QueryException

Get the connection name for the query.

QueryException::getSql() — Method in class QueryException

Get the SQL for the query.

QueryException::getBindings() — Method in class QueryException

Get the bindings for the query.

$ Builder#grammarProperty in class Builder

The database query grammar instance.

$ Builder#groupsProperty in class Builder

The groupings for the query.

Builder::groupBy() — Method in class Builder

Add a "group by" clause to the query.

Builder::groupByRaw() — Method in class Builder

Add a raw groupBy clause to the query.

Builder::get() — Method in class Builder

Execute the query as a "select" statement.

Builder::getCountForPagination() — Method in class Builder

Get the count of the total records for the paginator.

Builder::getColumns() — Method in class Builder

Get all of the query builder's columns in a text-only array with all expressions evaluated.

Builder::getBindings() — Method in class Builder

Get the current query value bindings in a flattened array.

Builder::getRawBindings() — Method in class Builder

Get the raw array of bindings.

Builder::getConnection() — Method in class Builder

Get the database connection instance.

Builder::getProcessor() — Method in class Builder

Get the database query processor instance.

Builder::getGrammar() — Method in class Builder

Get the query grammar instance.

Expression::getValue() — Method in class Expression

Get the value of the expression.

GrammarClass in namespace Illuminate\Database\Query\Grammars
Grammar::getOperators() — Method in class Grammar

Get the grammar specific operators.

Grammar::getBitwiseOperators() — Method in class Grammar

Get the grammar specific bitwise operators.

SQLiteGrammar::groupJsonColumnsForUpdate() — Method in class SQLiteGrammar

Group the nested JSON columns.

SqlServerGrammar::getDateFormat() — Method in class SqlServerGrammar

Get the format for database stored dates.

SQLiteConnection::getDefaultQueryGrammar() — Method in class SQLiteConnection

Get the default query grammar instance.

SQLiteConnection::getSchemaBuilder() — Method in class SQLiteConnection

Get a schema builder instance for the connection.

SQLiteConnection::getDefaultSchemaGrammar() — Method in class SQLiteConnection

Get the default schema grammar instance.

SQLiteConnection::getSchemaState() — Method in class SQLiteConnection

Get the schema state for the connection.

SQLiteConnection::getDefaultPostProcessor() — Method in class SQLiteConnection

Get the default post processor instance.

SQLiteConnection::getDoctrineDriver() — Method in class SQLiteConnection

Get the Doctrine DBAL driver.

SQLiteConnection::getForeignKeyConstraintsConfigurationValue() — Method in class SQLiteConnection

Get the database connection foreign key constraints configuration option.

Blueprint::geometry() — Method in class Blueprint

Create a new geometry column on the table.

Blueprint::geometryCollection() — Method in class Blueprint

Create a new geometrycollection column on the table.

Blueprint::getTable() — Method in class Blueprint

Get the table the blueprint describes.

Blueprint::getColumns() — Method in class Blueprint

Get the columns on the blueprint.

Blueprint::getCommands() — Method in class Blueprint

Get the commands on the blueprint.

Blueprint::getAddedColumns() — Method in class Blueprint

Get the columns on the blueprint that should be added.

Blueprint::getChangedColumns() — Method in class Blueprint

Get the columns on the blueprint that should be changed.

$ Builder#grammarProperty in class Builder

The schema grammar instance.

Builder::getColumnType() — Method in class Builder

Get the data type for the given column name.

Builder::getColumnListing() — Method in class Builder

Get the column listing for a given table.

Builder::getAllTables() — Method in class Builder

Get all of the table names for the database.

Builder::getConnection() — Method in class Builder

Get the database connection instance.

ColumnDefinition::generatedAs() — Method in class ColumnDefinition
ChangeColumn::getChangedDiff() — Method in class ChangeColumn

Get the Doctrine table difference for the given changes.

ChangeColumn::getTableWithColumnChanges() — Method in class ChangeColumn

Get a copy of the given Doctrine table after making the column changes.

ChangeColumn::getDoctrineColumn() — Method in class ChangeColumn

Get the Doctrine column instance for a column change.

ChangeColumn::getDoctrineColumnChangeOptions() — Method in class ChangeColumn

Get the Doctrine column change options.

ChangeColumn::getDoctrineColumnType() — Method in class ChangeColumn

Get the doctrine column type.

GrammarClass in namespace Illuminate\Database\Schema\Grammars
Grammar::getColumns() — Method in class Grammar

Compile the blueprint's added column definitions.

Grammar::getType() — Method in class Grammar

Get the SQL for the column data type.

Grammar::getCommandByName() — Method in class Grammar

Get the primary key command if it exists on the blueprint.

Grammar::getCommandsByName() — Method in class Grammar

Get all of the commands with a given name.

Grammar::getDefaultValue() — Method in class Grammar

Format a value so that it can be used in "default" clauses.

Grammar::getDoctrineTableDiff() — Method in class Grammar

Create an empty Doctrine DBAL TableDiff from the Blueprint.

Grammar::getFluentCommands() — Method in class Grammar

Get the fluent commands for the grammar.

RenameColumn::getRenamedDiff() — Method in class RenameColumn

Get a new column instance with the new column name.

SQLiteGrammar::getForeignKey() — Method in class SQLiteGrammar

Get the SQL for the foreign key.

MySqlBuilder::getColumnListing() — Method in class MySqlBuilder

Get the column listing for a given table.

MySqlBuilder::getAllTables() — Method in class MySqlBuilder

Get all of the table names for the database.

MySqlBuilder::getAllViews() — Method in class MySqlBuilder

Get all of the view names for the database.

PostgresBuilder::getAllTables() — Method in class PostgresBuilder

Get all of the table names for the database.

PostgresBuilder::getAllViews() — Method in class PostgresBuilder

Get all of the view names for the database.

PostgresBuilder::getAllTypes() — Method in class PostgresBuilder

Get all of the type names for the database.

PostgresBuilder::getColumnListing() — Method in class PostgresBuilder

Get the column listing for a given table.

SQLiteBuilder::getAllTables() — Method in class SQLiteBuilder

Get all of the table names for the database.

SQLiteBuilder::getAllViews() — Method in class SQLiteBuilder

Get all of the view names for the database.

SqlServerBuilder::getAllTables() — Method in class SqlServerBuilder

Drop all tables from the database.

SqlServerBuilder::getAllViews() — Method in class SqlServerBuilder

Get all of the view names for the database.

SqlServerConnection::getDefaultQueryGrammar() — Method in class SqlServerConnection

Get the default query grammar instance.

SqlServerConnection::getSchemaBuilder() — Method in class SqlServerConnection

Get a schema builder instance for the connection.

SqlServerConnection::getDefaultSchemaGrammar() — Method in class SqlServerConnection

Get the default schema grammar instance.

SqlServerConnection::getSchemaState() — Method in class SqlServerConnection

Get the schema state for the connection.

SqlServerConnection::getDefaultPostProcessor() — Method in class SqlServerConnection

Get the default post processor instance.

SqlServerConnection::getDoctrineDriver() — Method in class SqlServerConnection

Get the Doctrine DBAL driver.

Encrypter::generateKey() — Method in class Encrypter

Create a new encryption key for the given cipher.

Encrypter::getJsonPayload() — Method in class Encrypter

Get the JSON array from the given payload.

Encrypter::getKey() — Method in class Encrypter

Get the encryption key that the encrypter is currently using.

Dispatcher::getListeners() — Method in class Dispatcher

Get all of the listeners for a given event name.

Dispatcher::getWildcardListeners() — Method in class Dispatcher

Get the wildcard listeners for the event.

Dispatcher::getRawListeners() — Method in class Dispatcher

Gets the raw, unprepared listeners.

AwsS3V3Adapter::getClient() — Method in class AwsS3V3Adapter

Get the underlying S3 client.

Filesystem::get() — Method in class Filesystem

Get the contents of a file.

Filesystem::getRequire() — Method in class Filesystem

Get the returned value of a file.

Filesystem::guessExtension() — Method in class Filesystem

Guess the file extension from the mime-type of a given file.

Filesystem::glob() — Method in class Filesystem

Find path names matching a given pattern.

FilesystemAdapter::get() — Method in class FilesystemAdapter

Get the contents of a file.

FilesystemAdapter::getVisibility() — Method in class FilesystemAdapter

Get the visibility for the given path.

FilesystemAdapter::getFtpUrl() — Method in class FilesystemAdapter

Get the URL for the file at the given path.

FilesystemAdapter::getLocalUrl() — Method in class FilesystemAdapter

Get the URL for the file at the given path.

FilesystemAdapter::getDriver() — Method in class FilesystemAdapter

Get the Flysystem driver.

FilesystemAdapter::getAdapter() — Method in class FilesystemAdapter

Get the Flysystem adapter.

FilesystemAdapter::getConfig() — Method in class FilesystemAdapter

Get the configuration values.

FilesystemManager::get() — Method in class FilesystemManager

Attempt to get the disk from the local cache.

FilesystemManager::getConfig() — Method in class FilesystemManager

Get the filesystem connection configuration.

FilesystemManager::getDefaultDriver() — Method in class FilesystemManager

Get the default driver name.

FilesystemManager::getDefaultCloudDriver() — Method in class FilesystemManager

Get the default cloud driver name.

FilesystemServiceProvider::getDefaultDriver() — Method in class FilesystemServiceProvider

Get the default file driver.

FilesystemServiceProvider::getCloudDriver() — Method in class FilesystemServiceProvider

Get the default cloud based file driver.

LockableFile::getSharedLock() — Method in class LockableFile

Get a shared lock on the file.

LockableFile::getExclusiveLock() — Method in class LockableFile

Get an exclusive lock on the file.

AliasLoader::getInstance() — Method in class AliasLoader

Get or create the singleton alias loader instance.

AliasLoader::getAliases() — Method in class AliasLoader

Get the registered aliases.

Application::getProvider() — Method in class Application

Get the registered service provider instance if it exists.

Application::getProviders() — Method in class Application

Get the registered service provider instances if any exist.

Application::getCachedServicesPath() — Method in class Application

Get the path to the cached services.php file.

Application::getCachedPackagesPath() — Method in class Application

Get the path to the cached packages.php file.

Application::getCachedConfigPath() — Method in class Application

Get the path to the configuration cache file.

Application::getCachedRoutesPath() — Method in class Application

Get the path to the routes cache file.

Application::getCachedEventsPath() — Method in class Application

Get the path to the events cache file.

Application::getLoadedProviders() — Method in class Application

Get the service providers that have been loaded.

Application::getDeferredServices() — Method in class Application

Get the application's deferred services.

Application::getLocale() — Method in class Application

Get the current application locale.

Application::getFallbackLocale() — Method in class Application

Get the current application fallback locale.

Application::getNamespace() — Method in class Application

Get the application namespace.

HandleExceptions::getExceptionHandler() — Method in class HandleExceptions

Get an instance of the exception handler.

LoadConfiguration::getConfigurationFiles() — Method in class LoadConfiguration

Get all of the configuration files for the application.

LoadConfiguration::getNestedDirectory() — Method in class LoadConfiguration

Get the configuration file nesting path.

CacheBasedMaintenanceMode::getStore() — Method in class CacheBasedMaintenanceMode

Get the cache store to use.

ResolvesDumpSource::getOriginalFileForCompiledView() — Method in class ResolvesDumpSource

Get the original view compiled file by the given compiled file.

AboutCommand::gatherApplicationInformation() — Method in class AboutCommand

Gather information about the application.

CastMakeCommand::getStub() — Method in class CastMakeCommand

Get the stub file for the generator.

CastMakeCommand::getDefaultNamespace() — Method in class CastMakeCommand

Get the default namespace for the class.

CastMakeCommand::getOptions() — Method in class CastMakeCommand

Get the console command arguments.

ChannelListCommand::getTerminalWidth() — Method in class ChannelListCommand

Get the terminal width.

ChannelMakeCommand::getStub() — Method in class ChannelMakeCommand

Get the stub file for the generator.

ChannelMakeCommand::getDefaultNamespace() — Method in class ChannelMakeCommand

Get the default namespace for the class.

ChannelMakeCommand::getOptions() — Method in class ChannelMakeCommand

Get the console command arguments.

CliDumper::getDumpSourceContent() — Method in class CliDumper

Get the dump's source console content.

ComponentMakeCommand::getView() — Method in class ComponentMakeCommand

Get the view name relative to the components directory.

ComponentMakeCommand::getStub() — Method in class ComponentMakeCommand

Get the stub file for the generator.

ComponentMakeCommand::getDefaultNamespace() — Method in class ComponentMakeCommand

Get the default namespace for the class.

ComponentMakeCommand::getOptions() — Method in class ComponentMakeCommand

Get the console command options.

ConfigCacheCommand::getFreshConfiguration() — Method in class ConfigCacheCommand

Boot a fresh copy of the application configuration.

ConsoleMakeCommand::getStub() — Method in class ConsoleMakeCommand

Get the stub file for the generator.

ConsoleMakeCommand::getDefaultNamespace() — Method in class ConsoleMakeCommand

Get the default namespace for the class.

ConsoleMakeCommand::getArguments() — Method in class ConsoleMakeCommand

Get the console command arguments.

ConsoleMakeCommand::getOptions() — Method in class ConsoleMakeCommand

Get the console command options.

DocsCommand::guessPage() — Method in class DocsCommand

Guess the page the user is attempting to open.

DocsCommand::guessSection() — Method in class DocsCommand

Guess the section the user is attempting to open.

DownCommand::getDownFilePayload() — Method in class DownCommand

Get the payload to be placed in the "down" file.

DownCommand::getRetryTime() — Method in class DownCommand

Get the number of seconds the client should wait before retrying their request.

EventCacheCommand::getEvents() — Method in class EventCacheCommand

Get all of the events and listeners configured for the application.

EventListCommand::getEvents() — Method in class EventListCommand

Get all of the events and listeners configured for the application.

EventListCommand::getListenersOnDispatcher() — Method in class EventListCommand

Get the event / listeners from the dispatcher object.

EventListCommand::getRawListeners() — Method in class EventListCommand

Gets the raw version of event listeners from the event dispatcher.

EventListCommand::getEventsDispatcher() — Method in class EventListCommand

Get the event dispatcher.

EventMakeCommand::getStub() — Method in class EventMakeCommand

Get the stub file for the generator.

EventMakeCommand::getDefaultNamespace() — Method in class EventMakeCommand

Get the default namespace for the class.

EventMakeCommand::getOptions() — Method in class EventMakeCommand

Get the console command options.

ExceptionMakeCommand::getStub() — Method in class ExceptionMakeCommand

Get the stub file for the generator.

ExceptionMakeCommand::getDefaultNamespace() — Method in class ExceptionMakeCommand

Get the default namespace for the class.

ExceptionMakeCommand::getOptions() — Method in class ExceptionMakeCommand

Get the console command options.

JobMakeCommand::getStub() — Method in class JobMakeCommand

Get the stub file for the generator.

JobMakeCommand::getDefaultNamespace() — Method in class JobMakeCommand

Get the default namespace for the class.

JobMakeCommand::getOptions() — Method in class JobMakeCommand

Get the console command options.

Kernel::getArtisan() — Method in class Kernel

Get the Artisan application instance.

KeyGenerateCommand::generateRandomKey() — Method in class KeyGenerateCommand

Generate a random key for the application.

ListenerMakeCommand::getStub() — Method in class ListenerMakeCommand

Get the stub file for the generator.

ListenerMakeCommand::getDefaultNamespace() — Method in class ListenerMakeCommand

Get the default namespace for the class.

ListenerMakeCommand::getOptions() — Method in class ListenerMakeCommand

Get the console command options.

MailMakeCommand::getView() — Method in class MailMakeCommand

Get the view name.

MailMakeCommand::getStub() — Method in class MailMakeCommand

Get the stub file for the generator.

MailMakeCommand::getDefaultNamespace() — Method in class MailMakeCommand

Get the default namespace for the class.

MailMakeCommand::getOptions() — Method in class MailMakeCommand

Get the console command options.

ModelMakeCommand::getStub() — Method in class ModelMakeCommand

Get the stub file for the generator.

ModelMakeCommand::getDefaultNamespace() — Method in class ModelMakeCommand

Get the default namespace for the class.

ModelMakeCommand::getOptions() — Method in class ModelMakeCommand

Get the console command options.

NotificationMakeCommand::getStub() — Method in class NotificationMakeCommand

Get the stub file for the generator.

NotificationMakeCommand::getDefaultNamespace() — Method in class NotificationMakeCommand

Get the default namespace for the class.

NotificationMakeCommand::getOptions() — Method in class NotificationMakeCommand

Get the console command options.

ObserverMakeCommand::getStub() — Method in class ObserverMakeCommand

Get the stub file for the generator.

ObserverMakeCommand::getDefaultNamespace() — Method in class ObserverMakeCommand

Get the default namespace for the class.

ObserverMakeCommand::getOptions() — Method in class ObserverMakeCommand

Get the console command arguments.

PolicyMakeCommand::getStub() — Method in class PolicyMakeCommand

Get the stub file for the generator.

PolicyMakeCommand::getDefaultNamespace() — Method in class PolicyMakeCommand

Get the default namespace for the class.

PolicyMakeCommand::getOptions() — Method in class PolicyMakeCommand

Get the console command arguments.

ProviderMakeCommand::getStub() — Method in class ProviderMakeCommand

Get the stub file for the generator.

ProviderMakeCommand::getDefaultNamespace() — Method in class ProviderMakeCommand

Get the default namespace for the class.

ProviderMakeCommand::getOptions() — Method in class ProviderMakeCommand

Get the console command arguments.

RequestMakeCommand::getStub() — Method in class RequestMakeCommand

Get the stub file for the generator.

RequestMakeCommand::getDefaultNamespace() — Method in class RequestMakeCommand

Get the default namespace for the class.

RequestMakeCommand::getOptions() — Method in class RequestMakeCommand

Get the console command arguments.

ResourceMakeCommand::getStub() — Method in class ResourceMakeCommand

Get the stub file for the generator.

ResourceMakeCommand::getDefaultNamespace() — Method in class ResourceMakeCommand

Get the default namespace for the class.

ResourceMakeCommand::getOptions() — Method in class ResourceMakeCommand

Get the console command options.

RouteCacheCommand::getFreshApplicationRoutes() — Method in class RouteCacheCommand

Boot a fresh copy of the application and get the routes.

RouteCacheCommand::getFreshApplication() — Method in class RouteCacheCommand

Get a fresh application instance.

RouteListCommand::getRoutes() — Method in class RouteListCommand

Compile the routes into a displayable format.

RouteListCommand::getRouteInformation() — Method in class RouteListCommand

Get the route information for a given route.

RouteListCommand::getMiddleware() — Method in class RouteListCommand

Get the middleware for the route.

RouteListCommand::getHeaders() — Method in class RouteListCommand

Get the table headers for the visible columns.

RouteListCommand::getColumns() — Method in class RouteListCommand

Get the column names to show (lowercase table headers).

RouteListCommand::getTerminalWidth() — Method in class RouteListCommand

Get the terminal width.

RouteListCommand::getOptions() — Method in class RouteListCommand

Get the console command options.

RuleMakeCommand::getStub() — Method in class RuleMakeCommand

Get the stub file for the generator.

RuleMakeCommand::getDefaultNamespace() — Method in class RuleMakeCommand

Get the default namespace for the class.

RuleMakeCommand::getOptions() — Method in class RuleMakeCommand

Get the console command options.

ScopeMakeCommand::getStub() — Method in class ScopeMakeCommand

Get the stub file for the generator.

ScopeMakeCommand::getDefaultNamespace() — Method in class ScopeMakeCommand

Get the default namespace for the class.

ScopeMakeCommand::getOptions() — Method in class ScopeMakeCommand

Get the console command arguments.

ServeCommand::getHostAndPort() — Method in class ServeCommand

Get the host and port from the host option string.

ServeCommand::getDateFromLine() — Method in class ServeCommand

Get the date from the given PHP server output.

ServeCommand::getRequestPortFromLine() — Method in class ServeCommand

Get the request port from the given PHP server output.

ServeCommand::getOptions() — Method in class ServeCommand

Get the console command options.

TestMakeCommand::getStub() — Method in class TestMakeCommand

Get the stub file for the generator.

TestMakeCommand::getPath() — Method in class TestMakeCommand

Get the destination class path.

TestMakeCommand::getDefaultNamespace() — Method in class TestMakeCommand

Get the default namespace for the class.

TestMakeCommand::getOptions() — Method in class TestMakeCommand

Get the console command options.

EnvironmentDetector::getEnvironmentArgument() — Method in class EnvironmentDetector

Get the environment argument from the console.

DiscoverEvents::getListenerEvents() — Method in class DiscoverEvents

Get all of the listeners and their corresponding events.

Handler::getHttpExceptionView() — Method in class Handler

Get the view used to render HTTP exceptions.

FormRequest::getValidatorInstance() — Method in class FormRequest

Get the validator instance for the request.

FormRequest::getRedirectUrl() — Method in class FormRequest

Get the URL to redirect to on a validation error.

HtmlDumper::getDumpSourceContent() — Method in class HtmlDumper

Get the dump's source HTML content.

Kernel::gatherRouteMiddleware() — Method in class Kernel

Gather the route middleware for the given request.

Kernel::getMiddlewarePriority() — Method in class Kernel

Get the priority-sorted list of middleware.

Kernel::getMiddlewareGroups() — Method in class Kernel

Get the application's route middleware groups.

Kernel::getRouteMiddleware() — Method in class Kernel

Get the application's route middleware aliases.

Kernel::getMiddlewareAliases() — Method in class Kernel

Get the application's route middleware aliases.

Kernel::getApplication() — Method in class Kernel

Get the Laravel application instance.

PreventRequestsDuringMaintenance::getHeaders() — Method in class PreventRequestsDuringMaintenance

Get the headers that should be sent with the response.

PreventRequestsDuringMaintenance::getExcludedPaths() — Method in class PreventRequestsDuringMaintenance

Get the URIs that should be accessible even when maintenance mode is enabled.

ValidatePostSize::getPostMaxSize() — Method in class ValidatePostSize

Determine the server 'post_max_size' as bytes.

VerifyCsrfToken::getTokenFromRequest() — Method in class VerifyCsrfToken

Get the CSRF token from the request.

MaintenanceModeManager::getDefaultDriver() — Method in class MaintenanceModeManager

Get the default driver name.

PackageManifest::getManifest() — Method in class PackageManifest

Get the current package manifest.

EventServiceProvider::getEvents() — Method in class EventServiceProvider

Get the discovered events and listeners for the application.

InteractsWithDatabase::getConnection() — Method in class InteractsWithDatabase

Get the database connection.

InteractsWithDatabase::getTable() — Method in class InteractsWithDatabase

Get the table name from the given model or string.

InteractsWithDatabase::getTableConnection() — Method in class InteractsWithDatabase

Get the table connection specified in the given model.

ValidatesRequests::getValidationFactory() — Method in class ValidatesRequests

Get a validation factory instance.

HashManager::getDefaultDriver() — Method in class HashManager

Get the default driver name.

Factory::getDispatcher() — Method in class Factory

Get the current event dispatcher implementation.

PendingRequest::get() — Method in class PendingRequest

Issue a GET request to the given URL.

PendingRequest::getReusableClient() — Method in class PendingRequest

Retrieve a reusable Guzzle client.

PendingRequest::getPromise() — Method in class PendingRequest

Retrieve the pending request promise.

PendingRequest::getOptions() — Method in class PendingRequest

Get the pending request options.

Pool::getRequests() — Method in class Pool

Retrieve the requests in the pool.

HttpResponseException::getResponse() — Method in class HttpResponseException

Get the underlying response instance.

JsonResponse::getData() — Method in class JsonResponse

Get the json_decoded data from the response.

HandleCors::getPathsByHost() — Method in class HandleCors

Get the CORS paths for the given host.

TrustProxies::getTrustedHeaderNames() — Method in class TrustProxies

Retrieve trusted header name(s), falling back to defaults if config not set.

RedirectResponse::getOriginalContent() — Method in class RedirectResponse

Get the original response content.

RedirectResponse::getRequest() — Method in class RedirectResponse

Get the request instance.

RedirectResponse::getSession() — Method in class RedirectResponse

Get the session store instance.

Request::get() — Method in class Request

This method belongs to Symfony HttpFoundation and is not usually needed when using Laravel.

Request::getInputSource() — Method in class Request

Get the input source for the request.

Request::getSession() — Method in class Request
{@inheritdoc}
Request::getUserResolver() — Method in class Request

Get the user resolver callback.

Request::getRouteResolver() — Method in class Request

Get the route resolver callback.

CollectsResources::getIterator() — Method in class CollectsResources

Get an iterator for the resource collection.

DelegatesToResource::getRouteKey() — Method in class DelegatesToResource

Get the value of the resource's route key.

DelegatesToResource::getRouteKeyName() — Method in class DelegatesToResource

Get the route key for the resource.

ResponseTrait::getOriginalContent() — Method in class ResponseTrait

Get the original response content.

ResponseTrait::getCallback() — Method in class ResponseTrait

Get the callback of the response.

File::getSize() — Method in class File

Get the size of the file.

File::getMimeType() — Method in class File

Get the MIME type of the file.

FileFactory::generateImage() — Method in class FileFactory

Generate a dummy image of the given width and height.

MimeType::getMimeTypes() — Method in class MimeType

Get the mime types instance.

MimeType::get() — Method in class MimeType

Get the MIME type for a given extension or return all mimes.

UploadedFile::get() — Method in class UploadedFile

Get the contents of the uploaded file.

LogManager::get() — Method in class LogManager

Attempt to get the log from the local cache.

LogManager::getFallbackChannelName() — Method in class LogManager

Get fallback log channel name.

LogManager::getDefaultDriver() — Method in class LogManager

Get the default log driver name.

LogManager::getChannels() — Method in class LogManager

Get all of the resolved log channels.

Logger::getLogger() — Method in class Logger

Get the underlying logger implementation.

Logger::getEventDispatcher() — Method in class Logger

Get the event dispatcher instance.

ParsesLogConfiguration::getFallbackChannelName() — Method in class ParsesLogConfiguration

Get fallback log channel name.

MailManager::get() — Method in class MailManager

Attempt to get the mailer from the local cache.

MailManager::getHttpClient() — Method in class MailManager

Get a configured Symfony HTTP client instance.

MailManager::getConfig() — Method in class MailManager

Get the mail connection configuration.

MailManager::getDefaultDriver() — Method in class MailManager

Get the default mail driver name.

MailManager::getApplication() — Method in class MailManager

Get the application instance used by the manager.

Mailer::getSymfonyTransport() — Method in class Mailer

Get the Symfony Transport instance.

Mailer::getViewFactory() — Method in class Mailer

Get the view factory instance.

Markdown::getTheme() — Method in class Markdown

Get the theme currently being used by the renderer.

Message::getSymfonyMessage() — Method in class Message

Get the underlying Symfony Email instance.

SentMessage::getSymfonySentMessage() — Method in class SentMessage

Get the underlying Symfony Email instance.

SesTransport::getOptions() — Method in class SesTransport

Get the transmission options being used by the transport.

SesV2Transport::getOptions() — Method in class SesV2Transport

Get the transmission options being used by the transport.

AnonymousNotifiable::getKey() — Method in class AnonymousNotifiable

Get the value of the notifiable's primary key.

ChannelManager::getDefaultDriver() — Method in class ChannelManager

Get the default channel driver name.

BroadcastChannel::getData() — Method in class BroadcastChannel

Get the data for the notification.

DatabaseChannel::getData() — Method in class DatabaseChannel

Get the data for the notification.

MailChannel::getRecipients() — Method in class MailChannel

Get the recipients of the given message.

$ DatabaseNotification#guardedProperty in class DatabaseNotification

The guarded attributes on the model.

$ SimpleMessage#greetingProperty in class SimpleMessage

The notification's greeting.

SimpleMessage::greeting() — Method in class SimpleMessage

Set the greeting of the notification.

AbstractCursorPaginator::getCursorForItem() — Method in class AbstractCursorPaginator

Get a cursor instance for the given item.

AbstractCursorPaginator::getParametersForItem() — Method in class AbstractCursorPaginator

Get the cursor parameters for a given object.

AbstractCursorPaginator::getPivotParameterForItem() — Method in class AbstractCursorPaginator

Get the cursor parameter value from a pivot model if applicable.

AbstractCursorPaginator::getCursorName() — Method in class AbstractCursorPaginator

Get the query string variable used to store the cursor.

AbstractCursorPaginator::getIterator() — Method in class AbstractCursorPaginator

Get an iterator for the items.

AbstractCursorPaginator::getCollection() — Method in class AbstractCursorPaginator

Get the paginator's underlying collection.

AbstractCursorPaginator::getOptions() — Method in class AbstractCursorPaginator

Get the paginator options.

AbstractPaginator::getUrlRange() — Method in class AbstractPaginator

Create a range of pagination URLs.

AbstractPaginator::getPageName() — Method in class AbstractPaginator

Get the query string variable used to store the page.

AbstractPaginator::getIterator() — Method in class AbstractPaginator

Get an iterator for the items.

AbstractPaginator::getCollection() — Method in class AbstractPaginator

Get the paginator's underlying collection.

AbstractPaginator::getOptions() — Method in class AbstractPaginator

Get the paginator options.

UrlWindow::get() — Method in class UrlWindow

Get the window of URLs to be shown.

UrlWindow::getSmallSlider() — Method in class UrlWindow

Get the slider of URLs there are not enough pages to slide.

UrlWindow::getUrlSlider() — Method in class UrlWindow

Create a URL slider links.

UrlWindow::getSliderTooCloseToBeginning() — Method in class UrlWindow

Get the slider of URLs when too close to the beginning of the window.

UrlWindow::getSliderTooCloseToEnding() — Method in class UrlWindow

Get the slider of URLs when too close to the ending of the window.

UrlWindow::getFullSlider() — Method in class UrlWindow

Get the slider of URLs when a full slider can be made.

UrlWindow::getAdjacentUrlRange() — Method in class UrlWindow

Get the page range for the current page window.

UrlWindow::getStart() — Method in class UrlWindow

Get the starting URLs of a pagination slider.

UrlWindow::getFinish() — Method in class UrlWindow

Get the ending URLs of a pagination slider.

Hub::getContainer() — Method in class Hub

Get the container instance used by the hub.

Pipeline::getContainer() — Method in class Pipeline

Get the container instance.

BeanstalkdQueue::getQueue() — Method in class BeanstalkdQueue

Get the queue or return the default.

BeanstalkdQueue::getPheanstalk() — Method in class BeanstalkdQueue

Get the underlying Pheanstalk instance.

CallQueuedHandler::getCommand() — Method in class CallQueuedHandler

Get the command from the given payload.

Manager::getConnection() — Method in class Manager

Get a registered connection instance.

Manager::getQueueManager() — Method in class Manager

Get the queue manager instance.

SqsConnector::getDefaultConfiguration() — Method in class SqsConnector

Get the default configuration for SQS.

ClearCommand::getQueue() — Method in class ClearCommand

Get the queue name to clear.

ClearCommand::getArguments() — Method in class ClearCommand

Get the console command arguments.

ClearCommand::getOptions() — Method in class ClearCommand

Get the console command options.

ListFailedCommand::getFailedJobs() — Method in class ListFailedCommand

Compile the failed jobs into a displayable format.

ListenCommand::getQueue() — Method in class ListenCommand

Get the name of the queue connection to listen on.

ListenCommand::gatherOptions() — Method in class ListenCommand

Get the listener options for the command.

RetryCommand::getJobIds() — Method in class RetryCommand

Get the job IDs to be retried.

RetryCommand::getJobIdsByQueue() — Method in class RetryCommand

Get the job IDs by queue, if applicable.

RetryCommand::getJobIdsByRanges() — Method in class RetryCommand

Get the job IDs ranges, if applicable.

WorkCommand::gatherWorkerOptions() — Method in class WorkCommand

Gather all of the queue worker options as a single object.

WorkCommand::getQueue() — Method in class WorkCommand

Get the queue name for the worker.

DatabaseQueue::getNextAvailableJob() — Method in class DatabaseQueue

Get the next available job for the queue.

DatabaseQueue::getLockForPopping() — Method in class DatabaseQueue

Get the lock required for popping the next job.

DatabaseQueue::getQueue() — Method in class DatabaseQueue

Get the queue or return the default.

DatabaseQueue::getDatabase() — Method in class DatabaseQueue

Get the underlying database instance.

DatabaseFailedJobProvider::getTable() — Method in class DatabaseFailedJobProvider

Get a new query builder instance for the table.

DatabaseUuidFailedJobProvider::getTable() — Method in class DatabaseUuidFailedJobProvider

Get a new query builder instance for the table.

BeanstalkdJob::getJobId() — Method in class BeanstalkdJob

Get the job identifier.

BeanstalkdJob::getRawBody() — Method in class BeanstalkdJob

Get the raw body string for the job.

BeanstalkdJob::getPheanstalk() — Method in class BeanstalkdJob

Get the underlying Pheanstalk instance.

BeanstalkdJob::getPheanstalkJob() — Method in class BeanstalkdJob

Get the underlying Pheanstalk job.

DatabaseJob::getJobId() — Method in class DatabaseJob

Get the job identifier.

DatabaseJob::getRawBody() — Method in class DatabaseJob

Get the raw body string for the job.

DatabaseJob::getJobRecord() — Method in class DatabaseJob

Get the database job record.

Job::getJobId() — Method in class Job

Get the job identifier.

Job::getRawBody() — Method in class Job

Get the raw body of the job.

Job::getResolvedJob() — Method in class Job

Get the resolved job handler instance.

Job::getName() — Method in class Job

Get the name of the queued job class.

Job::getConnectionName() — Method in class Job

Get the name of the connection the job belongs to.

Job::getQueue() — Method in class Job

Get the name of the queue the job belongs to.

Job::getContainer() — Method in class Job

Get the service container instance.

RedisJob::getRawBody() — Method in class RedisJob

Get the raw body string for the job.

RedisJob::getJobId() — Method in class RedisJob

Get the job identifier.

RedisJob::getRedisQueue() — Method in class RedisJob

Get the underlying Redis factory implementation.

RedisJob::getReservedJob() — Method in class RedisJob

Get the underlying reserved Redis job.

SqsJob::getJobId() — Method in class SqsJob

Get the job identifier.

SqsJob::getRawBody() — Method in class SqsJob

Get the raw body string for the job.

SqsJob::getSqs() — Method in class SqsJob

Get the underlying SQS client instance.

SqsJob::getSqsJob() — Method in class SqsJob

Get the underlying raw SQS job.

SyncJob::getJobId() — Method in class SyncJob

Get the job identifier.

SyncJob::getRawBody() — Method in class SyncJob

Get the raw body string for the job.

SyncJob::getQueue() — Method in class SyncJob

Get the name of the queue the job belongs to.

RateLimited::getTimeUntilNextRetry() — Method in class RateLimited

Get the number of seconds that should elapse before the job is retried.

RateLimitedWithRedis::getTimeUntilNextRetry() — Method in class RateLimitedWithRedis

Get the number of seconds that should elapse before the job is retried.

ThrottlesExceptions::getKey() — Method in class ThrottlesExceptions

Get the cache key associated for the rate limiter.

ThrottlesExceptions::getTimeUntilNextRetry() — Method in class ThrottlesExceptions

Get the number of seconds that should elapse before the job is retried.

WithoutOverlapping::getLockKey() — Method in class WithoutOverlapping

Get the lock key for the given job.

Queue::getDisplayName() — Method in class Queue

Get the display name for the given job.

Queue::getJobBackoff() — Method in class Queue

Get the backoff for an object-based queue handler.

Queue::getJobExpiration() — Method in class Queue

Get the expiration timestamp for an object-based queue handler.

Queue::getConnectionName() — Method in class Queue

Get the connection name for the queue.

Queue::getContainer() — Method in class Queue

Get the container instance being used by the connection.

QueueManager::getConnector() — Method in class QueueManager

Get the connector for a given driver.

QueueManager::getConfig() — Method in class QueueManager

Get the queue connection configuration.

QueueManager::getDefaultDriver() — Method in class QueueManager

Get the name of the default queue connection.

QueueManager::getName() — Method in class QueueManager

Get the full name for the given connection.

QueueManager::getApplication() — Method in class QueueManager

Get the application instance used by the manager.

RedisQueue::getRandomId() — Method in class RedisQueue

Get a random ID string.

RedisQueue::getQueue() — Method in class RedisQueue

Get the queue or return the default.

RedisQueue::getConnection() — Method in class RedisQueue

Get the connection for the queue.

RedisQueue::getRedis() — Method in class RedisQueue

Get the underlying Redis instance.

SerializesAndRestoresModelIdentifiers::getSerializedPropertyValue() — Method in class SerializesAndRestoresModelIdentifiers

Get the property value prepared for serialization.

SerializesAndRestoresModelIdentifiers::getRestoredPropertyValue() — Method in class SerializesAndRestoresModelIdentifiers

Get the restored property value after deserialization.

SerializesAndRestoresModelIdentifiers::getQueryForModelRestoration() — Method in class SerializesAndRestoresModelIdentifiers

Get the query for model restoration.

SerializesModels::getPropertyValue() — Method in class SerializesModels

Get the property value for the given property.

SqsQueue::getQueue() — Method in class SqsQueue

Get the queue or return the default.

SqsQueue::getSqs() — Method in class SqsQueue

Get the underlying SQS instance.

Worker::getNextJob() — Method in class Worker

Get the next job from the queue connection.

Worker::getTimestampOfLastQueueRestart() — Method in class Worker

Get the last queue restart timestamp, or null.

Worker::getManager() — Method in class Worker

Get the queue manager instance.

Connection::getName() — Method in class Connection

Get the connection name.

Connection::getEventDispatcher() — Method in class Connection

Get the event dispatcher used by the connection.

PhpRedisConnection::get() — Method in class PhpRedisConnection

Returns the value of the given key.

AbstractRouteCollection::getRouteForMethods() — Method in class AbstractRouteCollection

Get a route (if necessary) that responds when other available methods are present.

AbstractRouteCollection::generateRouteName() — Method in class AbstractRouteCollection

Get a randomly generated route name.

AbstractRouteCollection::getIterator() — Method in class AbstractRouteCollection

Get an iterator for the items.

CompiledRouteCollection::get() — Method in class CompiledRouteCollection

Get routes from the collection by method.

CompiledRouteCollection::getByName() — Method in class CompiledRouteCollection

Get a route instance by its name.

CompiledRouteCollection::getByAction() — Method in class CompiledRouteCollection

Get a route instance by its controller action.

CompiledRouteCollection::getRoutes() — Method in class CompiledRouteCollection

Get all of the routes in the collection.

CompiledRouteCollection::getRoutesByMethod() — Method in class CompiledRouteCollection

Get all of the routes keyed by their HTTP verb / method.

CompiledRouteCollection::getRoutesByName() — Method in class CompiledRouteCollection

Get all of the routes keyed by their name.

ControllerMakeCommand::getStub() — Method in class ControllerMakeCommand

Get the stub file for the generator.

ControllerMakeCommand::getDefaultNamespace() — Method in class ControllerMakeCommand

Get the default namespace for the class.

ControllerMakeCommand::generateFormRequests() — Method in class ControllerMakeCommand

Generate the form requests for the given model and classes.

ControllerMakeCommand::getOptions() — Method in class ControllerMakeCommand

Get the console command options.

MiddlewareMakeCommand::getStub() — Method in class MiddlewareMakeCommand

Get the stub file for the generator.

MiddlewareMakeCommand::getDefaultNamespace() — Method in class MiddlewareMakeCommand

Get the default namespace for the class.

ControllerDispatcher::getMiddleware() — Method in class ControllerDispatcher

Get the middleware for the controller instance.

Controller::getMiddleware() — Method in class Controller

Get the middleware assigned to the controller.

ControllerDispatcher::getMiddleware() — Method in class ControllerDispatcher

Get the middleware for the controller instance.

StreamedResponseException::getInnerException() — Method in class StreamedResponseException

Get the actual exception thrown during the stream.

ImplicitRouteBinding::getParameterName() — Method in class ImplicitRouteBinding

Return the parameter name if it exists in the given parameters.

ThrottleRequests::getTimeUntilNextRetry() — Method in class ThrottleRequests

Get the number of seconds until the next retry.

ThrottleRequests::getHeaders() — Method in class ThrottleRequests

Get the limit headers information.

ThrottleRequestsWithRedis::getTimeUntilNextRetry() — Method in class ThrottleRequestsWithRedis

Get the number of seconds until the lock is released.

$ Redirector#generatorProperty in class Redirector

The URL generator instance.

Redirector::guest() — Method in class Redirector

Create a new redirect response, while putting the current URL in the session.

Redirector::getUrlGenerator() — Method in class Redirector

Get the URL generator instance.

Redirector::getIntendedUrl() — Method in class Redirector

Get the "intended" URL from the session.

ResourceRegistrar::getResourcePrefix() — Method in class ResourceRegistrar

Extract the resource and prefix from a resource name.

ResourceRegistrar::getResourceMethods() — Method in class ResourceRegistrar

Get the applicable resource methods.

ResourceRegistrar::getShallowName() — Method in class ResourceRegistrar

Get the name for a given resource with shallowness applied when applicable.

ResourceRegistrar::getResourceUri() — Method in class ResourceRegistrar

Get the base resource URI for a given resource.

ResourceRegistrar::getNestedResourceUri() — Method in class ResourceRegistrar

Get the URI for a nested resource segment array.

ResourceRegistrar::getResourceWildcard() — Method in class ResourceRegistrar

Format a resource parameter for usage.

ResourceRegistrar::getResourceAction() — Method in class ResourceRegistrar

Get the action array for a resource route.

ResourceRegistrar::getResourceRouteName() — Method in class ResourceRegistrar

Get the name for a given resource.

ResourceRegistrar::getParameters() — Method in class ResourceRegistrar

Get the global parameter map.

Route::getController() — Method in class Route

Get the controller instance for the route.

Route::getControllerClass() — Method in class Route

Get the controller class used for the route.

Route::getControllerMethod() — Method in class Route

Get the controller method used for the route.

Route::getDomain() — Method in class Route

Get the domain defined for the route.

Route::getPrefix() — Method in class Route

Get the prefix of the route instance.

Route::getName() — Method in class Route

Get the name of the route instance.

Route::getActionName() — Method in class Route

Get the action name for the route.

Route::getActionMethod() — Method in class Route

Get the method name of the route action.

Route::getAction() — Method in class Route

Get the action array or one of its properties for the route.

Route::getMissing() — Method in class Route

Get the value of the action that should be taken on a missing model exception.

Route::gatherMiddleware() — Method in class Route

Get all middleware, including the ones from the controller.

Route::getValidators() — Method in class Route

Get the route validators for the instance.

Route::getOptionalParameterNames() — Method in class Route

Get the optional parameter names for the route.

Route::getCompiled() — Method in class Route

Get the compiled version of the route.

RouteCollection::get() — Method in class RouteCollection

Get routes from the collection by method.

RouteCollection::getByName() — Method in class RouteCollection

Get a route instance by its name.

RouteCollection::getByAction() — Method in class RouteCollection

Get a route instance by its controller action.

RouteCollection::getRoutes() — Method in class RouteCollection

Get all of the routes in the collection.

RouteCollection::getRoutesByMethod() — Method in class RouteCollection

Get all of the routes keyed by their HTTP verb / method.

RouteCollection::getRoutesByName() — Method in class RouteCollection

Get all of the routes keyed by their name.

RouteCollectionInterface::get() — Method in class RouteCollectionInterface

Get routes from the collection by method.

RouteCollectionInterface::getByName() — Method in class RouteCollectionInterface

Get a route instance by its name.

RouteCollectionInterface::getByAction() — Method in class RouteCollectionInterface

Get a route instance by its controller action.

RouteCollectionInterface::getRoutes() — Method in class RouteCollectionInterface

Get all of the routes in the collection.

RouteCollectionInterface::getRoutesByMethod() — Method in class RouteCollectionInterface

Get all of the routes keyed by their HTTP verb / method.

RouteCollectionInterface::getRoutesByName() — Method in class RouteCollectionInterface

Get all of the routes keyed by their name.

RouteRegistrar::group() — Method in class RouteRegistrar

Create a route group with shared attributes.

RouteRegistrar::get() — Method in class RouteRegistrar
RouteUrlGenerator::getRouteDomain() — Method in class RouteUrlGenerator

Get the formatted domain for a given route.

RouteUrlGenerator::getRouteScheme() — Method in class RouteUrlGenerator

Get the scheme for the given route.

RouteUrlGenerator::getRouteQueryString() — Method in class RouteUrlGenerator

Get the query string for a given route.

RouteUrlGenerator::getStringParameters() — Method in class RouteUrlGenerator

Get the string parameters from a given list.

RouteUrlGenerator::getNumericParameters() — Method in class RouteUrlGenerator

Get the numeric parameters from a given list.

$ Router#groupStackProperty in class Router

The route group attribute stack.

Router::get() — Method in class Router

Register a new GET route with the router.

Router::group() — Method in class Router

Create a route group with shared attributes.

Router::getLastGroupPrefix() — Method in class Router

Get the prefix from the last group on the stack.

Router::gatherRouteMiddleware() — Method in class Router

Gather the middleware for the given route with resolved class names.

Router::getMiddleware() — Method in class Router

Get all of the defined middleware short-hand names.

Router::getMiddlewareGroups() — Method in class Router

Get all of the defined middleware groups.

Router::getBindingCallback() — Method in class Router

Get the binding callback for a given binding.

Router::getPatterns() — Method in class Router

Get the global "where" patterns.

Router::getGroupStack() — Method in class Router

Get the current group stack for the router.

Router::getCurrentRequest() — Method in class Router

Get the request currently being dispatched.

Router::getCurrentRoute() — Method in class Router

Get the currently dispatched route instance.

Router::getRoutes() — Method in class Router

Get the underlying route collection.

UrlGenerator::getPreviousUrlFromSession() — Method in class UrlGenerator

Get the previous URL from the session if possible.

UrlGenerator::getDefaultParameters() — Method in class UrlGenerator

Get the default named parameters used by the URL generator.

UrlGenerator::getRequest() — Method in class UrlGenerator

Get the request instance.

UrlGenerator::getSession() — Method in class UrlGenerator

Get the session implementation from the resolver.

UrlGenerator::getRootControllerNamespace() — Method in class UrlGenerator

Get the root controller namespace.

ArraySessionHandler::gc() — Method in class ArraySessionHandler
{@inheritdoc}
CacheBasedSessionHandler::gc() — Method in class CacheBasedSessionHandler
{@inheritdoc}
CacheBasedSessionHandler::getCache() — Method in class CacheBasedSessionHandler

Get the underlying cache repository.

CookieSessionHandler::gc() — Method in class CookieSessionHandler
{@inheritdoc}
DatabaseSessionHandler::getDefaultPayload() — Method in class DatabaseSessionHandler

Get the default payload for the session.

DatabaseSessionHandler::gc() — Method in class DatabaseSessionHandler
{@inheritdoc}
DatabaseSessionHandler::getQuery() — Method in class DatabaseSessionHandler

Get a fresh query builder instance for the table.

EncryptedStore::getEncrypter() — Method in class EncryptedStore

Get the encrypter instance.

FileSessionHandler::gc() — Method in class FileSessionHandler
{@inheritdoc}
AuthenticateSession::guard() — Method in class AuthenticateSession

Get the guard instance that should be used by the middleware.

StartSession::getSession() — Method in class StartSession

Get the session implementation from the manager.

StartSession::getSessionLifetimeInSeconds() — Method in class StartSession

Get the session lifetime in seconds.

StartSession::getCookieExpirationDate() — Method in class StartSession

Get the cookie lifetime in seconds.

NullSessionHandler::gc() — Method in class NullSessionHandler
{@inheritdoc}
SessionManager::getDatabaseConnection() — Method in class SessionManager

Get the database connection for the database driver.

SessionManager::getSessionConfig() — Method in class SessionManager

Get the session configuration.

SessionManager::getDefaultDriver() — Method in class SessionManager

Get the default session driver name.

Store::get() — Method in class Store

Get an item from the session.

Store::getOldInput() — Method in class Store

Get the requested item from the flashed input array.

Store::getName() — Method in class Store

Get the name of the session.

Store::getId() — Method in class Store

Get the current session ID.

Store::generateSessionId() — Method in class Store

Get a new, random session ID.

Store::getHandler() — Method in class Store

Get the underlying session handler implementation.

SymfonySessionDecorator::getId() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::getName() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::get() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::getBag() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::getMetadataBag() — Method in class SymfonySessionDecorator
{@inheritdoc}
Arr::get() — Method in class Arr

Get an item from an array using "dot" notation.

Collection::get() — Method in class Collection
Collection::getOrPut() — Method in class Collection
Collection::groupBy() — Method in class Collection
Collection::getIterator() — Method in class Collection

Get an iterator for the items.

Composer::getProcess() — Method in class Composer

Get a new Symfony process instance.

Composer::getVersion() — Method in class Composer

Get the version of Composer.

ConfigurationUrlParser::getPrimaryOptions() — Method in class ConfigurationUrlParser

Get the primary database connection options.

ConfigurationUrlParser::getDriver() — Method in class ConfigurationUrlParser

Get the database driver from the URL.

ConfigurationUrlParser::getDatabase() — Method in class ConfigurationUrlParser

Get the database name from the URL.

ConfigurationUrlParser::getQueryOptions() — Method in class ConfigurationUrlParser

Get all of the additional database options from the query string.

ConfigurationUrlParser::getDriverAliases() — Method in class ConfigurationUrlParser

Get all of the current drivers' aliases.

DateFactory::getAvailableLocales() — Method in class DateFactory
DateFactory::getDays() — Method in class DateFactory
DateFactory::getHumanDiffOptions() — Method in class DateFactory
DateFactory::getIsoUnits() — Method in class DateFactory
DateFactory::getLastErrors() — Method in class DateFactory
DateFactory::getLocale() — Method in class DateFactory
DateFactory::getMidDayAt() — Method in class DateFactory
DateFactory::getTestNow() — Method in class DateFactory
DateFactory::getTranslator() — Method in class DateFactory
DateFactory::getWeekEndsAt() — Method in class DateFactory
DateFactory::getWeekStartsAt() — Method in class DateFactory
DateFactory::getWeekendDays() — Method in class DateFactory
Enumerable::get() — Method in class Enumerable
Enumerable::groupBy() — Method in class Enumerable
Enumerable::getIterator() — Method in class Enumerable

Get the values iterator.

Enumerable::getCachingIterator() — Method in class Enumerable

Get a CachingIterator instance.

Env::getRepository() — Method in class Env

Get the environment repository instance.

Env::get() — Method in class Env

Gets the value of an environment variable.

App::getFacadeAccessor() — Method in class App

Get the registered name of the component.

App::getProvider() — Method in class App
App::getProviders() — Method in class App
App::getCachedServicesPath() — Method in class App
App::getCachedPackagesPath() — Method in class App
App::getCachedConfigPath() — Method in class App
App::getCachedRoutesPath() — Method in class App
App::getCachedEventsPath() — Method in class App
App::getLoadedProviders() — Method in class App
App::getDeferredServices() — Method in class App
App::getLocale() — Method in class App
App::getFallbackLocale() — Method in class App
App::getNamespace() — Method in class App
App::get() — Method in class App
App::getBindings() — Method in class App
App::getAlias() — Method in class App
App::getInstance() — Method in class App
Artisan::getFacadeAccessor() — Method in class Artisan

Get the registered name of the component.

Auth::getFacadeAccessor() — Method in class Auth

Get the registered name of the component.

Auth::guard() — Method in class Auth
Auth::getDefaultDriver() — Method in class Auth
Auth::getDefaultUserProvider() — Method in class Auth
Auth::guest() — Method in class Auth
Auth::getLastAttempted() — Method in class Auth
Auth::getName() — Method in class Auth
Auth::getRecallerName() — Method in class Auth
Auth::getCookieJar() — Method in class Auth
Auth::getDispatcher() — Method in class Auth
Auth::getSession() — Method in class Auth
Auth::getUser() — Method in class Auth
Auth::getRequest() — Method in class Auth
Auth::getTimebox() — Method in class Auth
Auth::getProvider() — Method in class Auth
Blade::getFacadeAccessor() — Method in class Blade

Get the registered name of the component.

Blade::getPath() — Method in class Blade
Blade::getExtensions() — Method in class Blade
Blade::getClassComponentAliases() — Method in class Blade
Blade::getAnonymousComponentPaths() — Method in class Blade
Blade::getAnonymousComponentNamespaces() — Method in class Blade
Blade::getClassComponentNamespaces() — Method in class Blade
Blade::getCustomDirectives() — Method in class Blade
Blade::getCompiledPath() — Method in class Blade
Broadcast::getFacadeAccessor() — Method in class Broadcast

Get the registered name of the component.

Broadcast::getDefaultDriver() — Method in class Broadcast
Broadcast::getApplication() — Method in class Broadcast
Broadcast::getChannels() — Method in class Broadcast
Bus::getFacadeAccessor() — Method in class Bus

Get the registered name of the component.

Bus::getCommandHandler() — Method in class Bus
Cache::getFacadeAccessor() — Method in class Cache

Get the registered name of the component.

Cache::getDefaultDriver() — Method in class Cache
Cache::get() — Method in class Cache
Cache::getMultiple() — Method in class Cache
Cache::getDefaultCacheTime() — Method in class Cache
Cache::getStore() — Method in class Cache
Cache::getEventDispatcher() — Method in class Cache
Cache::getPrefix() — Method in class Cache
Config::getFacadeAccessor() — Method in class Config

Get the registered name of the component.

Config::get() — Method in class Config
Config::getMany() — Method in class Config
Cookie::get() — Method in class Cookie

Retrieve a cookie from the request.

Cookie::getFacadeAccessor() — Method in class Cookie

Get the registered name of the component.

Cookie::getQueuedCookies() — Method in class Cookie
Crypt::getFacadeAccessor() — Method in class Crypt

Get the registered name of the component.

Crypt::generateKey() — Method in class Crypt
Crypt::getKey() — Method in class Crypt
DB::getFacadeAccessor() — Method in class DB

Get the registered name of the component.

DB::getDefaultConnection() — Method in class DB
DB::getConnections() — Method in class DB
DB::getSchemaBuilder() — Method in class DB
DB::getDoctrineColumn() — Method in class DB
DB::getDoctrineSchemaManager() — Method in class DB
DB::getDoctrineConnection() — Method in class DB
DB::getPdo() — Method in class DB
DB::getRawPdo() — Method in class DB
DB::getReadPdo() — Method in class DB
DB::getRawReadPdo() — Method in class DB
DB::getName() — Method in class DB
DB::getNameWithReadWriteType() — Method in class DB
DB::getConfig() — Method in class DB
DB::getDriverName() — Method in class DB
DB::getQueryGrammar() — Method in class DB
DB::getSchemaGrammar() — Method in class DB
DB::getPostProcessor() — Method in class DB
DB::getEventDispatcher() — Method in class DB
DB::getQueryLog() — Method in class DB
DB::getDatabaseName() — Method in class DB
DB::getTablePrefix() — Method in class DB
DB::getResolver() — Method in class DB
Date::getFacadeAccessor() — Method in class Date

Get the registered name of the component.

Date::getAvailableLocales() — Method in class Date
Date::getDays() — Method in class Date
Date::getHumanDiffOptions() — Method in class Date
Date::getIsoUnits() — Method in class Date
Date::getLastErrors() — Method in class Date
Date::getLocale() — Method in class Date
Date::getMidDayAt() — Method in class Date
Date::getTestNow() — Method in class Date
Date::getTranslator() — Method in class Date
Date::getWeekEndsAt() — Method in class Date
Date::getWeekStartsAt() — Method in class Date
Date::getWeekendDays() — Method in class Date
Event::getFacadeAccessor() — Method in class Event

Get the registered name of the component.

Event::getListeners() — Method in class Event
Event::getRawListeners() — Method in class Event
Facade::getMockableClass() — Method in class Facade

Get the mockable class for the bound instance.

Facade::getFacadeRoot() — Method in class Facade

Get the root object behind the facade.

Facade::getFacadeAccessor() — Method in class Facade

Get the registered name of the component.

Facade::getFacadeApplication() — Method in class Facade

Get the application instance behind the facade.

File::getFacadeAccessor() — Method in class File

Get the registered name of the component.

File::get() — Method in class File
File::getRequire() — Method in class File
File::guessExtension() — Method in class File
File::glob() — Method in class File
GateClass in namespace Illuminate\Support\Facades
Gate::getFacadeAccessor() — Method in class Gate

Get the registered name of the component.

Gate::getPolicyFor() — Method in class Gate
Gate::guessPolicyNamesUsing() — Method in class Gate
Hash::getFacadeAccessor() — Method in class Hash

Get the registered name of the component.

Hash::getDefaultDriver() — Method in class Hash
Hash::getDrivers() — Method in class Hash
Hash::getContainer() — Method in class Hash
Http::getFacadeAccessor() — Method in class Http

Get the registered name of the component.

Http::getDispatcher() — Method in class Http
Http::get() — Method in class Http
Http::getPromise() — Method in class Http
Http::getOptions() — Method in class Http
Lang::getFacadeAccessor() — Method in class Lang

Get the registered name of the component.

Lang::get() — Method in class Lang
Lang::getSelector() — Method in class Lang
Lang::getLoader() — Method in class Lang
Lang::getLocale() — Method in class Lang
Lang::getFallback() — Method in class Lang
Log::getFacadeAccessor() — Method in class Log

Get the registered name of the component.

Log::getDefaultDriver() — Method in class Log
Log::getChannels() — Method in class Log
Log::getLogger() — Method in class Log
Log::getEventDispatcher() — Method in class Log
Mail::getFacadeAccessor() — Method in class Mail

Get the registered name of the component.

Mail::getDefaultDriver() — Method in class Mail
Mail::getApplication() — Method in class Mail
Mail::getSymfonyTransport() — Method in class Mail
Mail::getViewFactory() — Method in class Mail
Notification::getFacadeAccessor() — Method in class Notification

Get the registered name of the component.

Notification::getDefaultDriver() — Method in class Notification
Notification::getDrivers() — Method in class Notification
Notification::getContainer() — Method in class Notification
ParallelTesting::getFacadeAccessor() — Method in class ParallelTesting

Get the registered name of the component.

Password::getFacadeAccessor() — Method in class Password

Get the registered name of the component.

Password::getDefaultDriver() — Method in class Password
Password::getUser() — Method in class Password
Password::getRepository() — Method in class Password
Pipeline::getFacadeAccessor() — Method in class Pipeline

Get the registered name of the component.

Process::getFacadeAccessor() — Method in class Process

Get the registered name of the component.

Queue::getFacadeAccessor() — Method in class Queue

Get the registered name of the component.

Queue::getDefaultDriver() — Method in class Queue
Queue::getName() — Method in class Queue
Queue::getApplication() — Method in class Queue
Queue::getConnectionName() — Method in class Queue
Queue::getJobBackoff() — Method in class Queue
Queue::getJobExpiration() — Method in class Queue
Queue::getContainer() — Method in class Queue
RateLimiter::getFacadeAccessor() — Method in class RateLimiter

Get the registered name of the component.

Redirect::getFacadeAccessor() — Method in class Redirect

Get the registered name of the component.

Redirect::guest() — Method in class Redirect
Redirect::getUrlGenerator() — Method in class Redirect
Redirect::getIntendedUrl() — Method in class Redirect
Redis::getFacadeAccessor() — Method in class Redis

Get the registered name of the component.

Redis::getName() — Method in class Redis
Redis::getEventDispatcher() — Method in class Redis
Request::getFacadeAccessor() — Method in class Request

Get the registered name of the component.

Request::get() — Method in class Request
Request::getSession() — Method in class Request
Request::getUserResolver() — Method in class Request
Request::getRouteResolver() — Method in class Request
Request::getTrustedProxies() — Method in class Request
Request::getTrustedHeaderSet() — Method in class Request
Request::getTrustedHosts() — Method in class Request
Request::getHttpMethodParameterOverride() — Method in class Request
Request::getClientIps() — Method in class Request
Request::getClientIp() — Method in class Request
Request::getScriptName() — Method in class Request
Request::getPathInfo() — Method in class Request
Request::getBasePath() — Method in class Request
Request::getBaseUrl() — Method in class Request
Request::getScheme() — Method in class Request
Request::getPort() — Method in class Request
Request::getUser() — Method in class Request
Request::getPassword() — Method in class Request
Request::getUserInfo() — Method in class Request
Request::getHttpHost() — Method in class Request
Request::getRequestUri() — Method in class Request
Request::getSchemeAndHttpHost() — Method in class Request
Request::getUri() — Method in class Request
Request::getUriForPath() — Method in class Request
Request::getRelativeUriForPath() — Method in class Request
Request::getQueryString() — Method in class Request
Request::getHost() — Method in class Request
Request::getMethod() — Method in class Request
Request::getRealMethod() — Method in class Request
Request::getMimeType() — Method in class Request
Request::getMimeTypes() — Method in class Request
Request::getFormat() — Method in class Request
Request::getRequestFormat() — Method in class Request
Request::getContentTypeFormat() — Method in class Request
Request::getDefaultLocale() — Method in class Request
Request::getLocale() — Method in class Request
Request::getProtocolVersion() — Method in class Request
Request::getContent() — Method in class Request
Request::getETags() — Method in class Request
Request::getPreferredFormat() — Method in class Request
Request::getPreferredLanguage() — Method in class Request
Request::getLanguages() — Method in class Request
Request::getCharsets() — Method in class Request
Request::getEncodings() — Method in class Request
Request::getAcceptableContentTypes() — Method in class Request
Response::getFacadeAccessor() — Method in class Response

Get the registered name of the component.

Route::getFacadeAccessor() — Method in class Route

Get the registered name of the component.

Route::get() — Method in class Route
Route::group() — Method in class Route
Route::getLastGroupPrefix() — Method in class Route
Route::gatherRouteMiddleware() — Method in class Route
Route::getMiddleware() — Method in class Route
Route::getMiddlewareGroups() — Method in class Route
Route::getBindingCallback() — Method in class Route
Route::getPatterns() — Method in class Route
Route::getGroupStack() — Method in class Route
Route::getCurrentRequest() — Method in class Route
Route::getCurrentRoute() — Method in class Route
Route::getRoutes() — Method in class Route
Schema::getFacadeAccessor() — Method in class Schema

Get the registered name of the component.

Schema::getColumnType() — Method in class Schema
Schema::getColumnListing() — Method in class Schema
Schema::getAllTables() — Method in class Schema
Schema::getConnection() — Method in class Schema
Session::getFacadeAccessor() — Method in class Session

Get the registered name of the component.

Session::getSessionConfig() — Method in class Session
Session::getDefaultDriver() — Method in class Session
Session::getDrivers() — Method in class Session
Session::getContainer() — Method in class Session
Session::get() — Method in class Session
Session::getOldInput() — Method in class Session
Session::getName() — Method in class Session
Session::getId() — Method in class Session
Session::getHandler() — Method in class Session
Storage::getFacadeAccessor() — Method in class Storage

Get the registered name of the component.

Storage::getDefaultDriver() — Method in class Storage
Storage::getDefaultCloudDriver() — Method in class Storage
Storage::get() — Method in class Storage
Storage::getVisibility() — Method in class Storage
Storage::getDriver() — Method in class Storage
Storage::getAdapter() — Method in class Storage
Storage::getConfig() — Method in class Storage
URL::getFacadeAccessor() — Method in class URL

Get the registered name of the component.

URL::getDefaultParameters() — Method in class URL
URL::getRequest() — Method in class URL
URL::getRootControllerNamespace() — Method in class URL
Validator::getFacadeAccessor() — Method in class Validator

Get the registered name of the component.

Validator::getTranslator() — Method in class Validator
Validator::getPresenceVerifier() — Method in class Validator
Validator::getContainer() — Method in class Validator
View::getFacadeAccessor() — Method in class View

Get the registered name of the component.

View::getEngineFromPath() — Method in class View
View::getExtensions() — Method in class View
View::getEngineResolver() — Method in class View
View::getFinder() — Method in class View
View::getDispatcher() — Method in class View
View::getContainer() — Method in class View
View::getShared() — Method in class View
View::getConsumableComponentData() — Method in class View
View::getFragment() — Method in class View
View::getFragments() — Method in class View
View::getSection() — Method in class View
View::getSections() — Method in class View
View::getLastLoop() — Method in class View
View::getLoopStack() — Method in class View
Vite::getFacadeAccessor() — Method in class Vite

Get the registered name of the component.

Fluent::get() — Method in class Fluent
Fluent::getAttributes() — Method in class Fluent
LazyCollection::get() — Method in class LazyCollection
LazyCollection::groupBy() — Method in class LazyCollection
LazyCollection::getIterator() — Method in class LazyCollection

Get the values iterator.

Manager::getDefaultDriver() — Method in class Manager

Get the default driver name.

Manager::getDrivers() — Method in class Manager

Get all of the created "drivers".

Manager::getContainer() — Method in class Manager

Get the container instance used by the manager.

MessageBag::get() — Method in class MessageBag

Get all of the messages from the message bag for a given key.

MessageBag::getMessagesForWildcardKey() — Method in class MessageBag

Get the messages for a wildcard key.

MessageBag::getMessages() — Method in class MessageBag

Get the raw messages in the message bag.

MessageBag::getMessageBag() — Method in class MessageBag

Get the messages for the instance.

MessageBag::getFormat() — Method in class MessageBag

Get the default message format.

MultipleInstanceManager::getDefaultInstance() — Method in class MultipleInstanceManager

Get the default instance name.

MultipleInstanceManager::getInstanceConfig() — Method in class MultipleInstanceManager

Get the instance specific configuration.

MultipleInstanceManager::get() — Method in class MultipleInstanceManager

Attempt to get an instance from the local cache.

MultipleItemsFoundException::getCount() — Method in class MultipleItemsFoundException

Get the number of items found.

Reflector::getParameterClassName() — Method in class Reflector

Get the class name of the given parameter's type, if possible.

Reflector::getParameterClassNames() — Method in class Reflector

Get the class names of the given parameter's type, including union types.

Reflector::getTypeName() — Method in class Reflector

Get the given type's class name.

BatchRepositoryFake::get() — Method in class BatchRepositoryFake

Retrieve a list of batches.

BusFake::getCommandHandler() — Method in class BusFake

Retrieve the handler for a command.

QueueFake::getConnectionName() — Method in class QueueFake

Get the connection name for the queue.

CapsuleManagerTrait::getContainer() — Method in class CapsuleManagerTrait

Get the IoC container instance.

$ EnumeratesValues#groupByProperty in class EnumeratesValues
EnumeratesValues::getCachingIterator() — Method in class EnumeratesValues

Get a CachingIterator instance.

EnumeratesValues::getArrayableItems() — Method in class EnumeratesValues
ValidatedInput::getIterator() — Method in class ValidatedInput

Get an iterator for the input.

ViewErrorBag::getBag() — Method in class ViewErrorBag

Get a MessageBag instance from the bags.

ViewErrorBag::getBags() — Method in class ViewErrorBag

Get all the bags.

RunsInParallel::getExitCode() — Method in class RunsInParallel

Returns the highest exit code encountered throughout the course of test execution.

HasInDatabase::getAdditionalInfo() — Method in class HasInDatabase

Get additional info about the records found in the database table.

NotSoftDeletedInDatabase::getAdditionalInfo() — Method in class NotSoftDeletedInDatabase

Get additional info about the records found in the database table.

SoftDeletedInDatabase::getAdditionalInfo() — Method in class SoftDeletedInDatabase

Get additional info about the records found in the database table.

TestResponse::getCookie() — Method in class TestResponse

Get the given cookie from the response.

MessageSelector::getPluralIndex() — Method in class MessageSelector

Get the index to use for pluralization.

Translator::get() — Method in class Translator

Get the translation for the given key.

Translator::getLine() — Method in class Translator

Retrieve a language line out the loaded array.

Translator::getSelector() — Method in class Translator

Get the message selector instance.

Translator::getLoader() — Method in class Translator

Get the language line loader implementation.

Translator::getLocale() — Method in class Translator

Get the default locale being used.

Translator::getFallback() — Method in class Translator

Get the fallback locale being used.

FilterEmailValidation::getError() — Method in class FilterEmailValidation

Returns the validation error.

FilterEmailValidation::getWarnings() — Method in class FilterEmailValidation

Returns the validation warnings.

FormatsMessages::getMessage() — Method in class FormatsMessages

Get the validation message for an attribute and rule.

FormatsMessages::getInlineMessage() — Method in class FormatsMessages

Get the proper inline error message for standard and size rules.

FormatsMessages::getFromLocalArray() — Method in class FormatsMessages

Get the inline message for a rule if it exists.

FormatsMessages::getCustomMessageFromTranslator() — Method in class FormatsMessages

Get the custom error message from the translator.

FormatsMessages::getWildcardCustomMessages() — Method in class FormatsMessages

Check the given messages for a wildcard key.

FormatsMessages::getSizeMessage() — Method in class FormatsMessages

Get the proper error message for an attribute and size rule.

FormatsMessages::getAttributeType() — Method in class FormatsMessages

Get the data type of the given attribute.

FormatsMessages::getDisplayableAttribute() — Method in class FormatsMessages

Get the displayable name of the attribute.

FormatsMessages::getAttributeFromTranslations() — Method in class FormatsMessages

Get the given attribute from the attribute translations.

FormatsMessages::getDisplayableValue() — Method in class FormatsMessages

Get the displayable name of the value.

FormatsMessages::getAttributeList() — Method in class FormatsMessages

Transform an array of attributes to their displayable form.

ValidatesAttributes::getDnsRecords() — Method in class ValidatesAttributes

Get the DNS records for the given hostname.

ValidatesAttributes::getDateFormat() — Method in class ValidatesAttributes

Get the date format for an attribute if it has one.

ValidatesAttributes::getDateTimestamp() — Method in class ValidatesAttributes

Get the date timestamp.

ValidatesAttributes::getDateTimeWithOptionalFormat() — Method in class ValidatesAttributes

Get a DateTime instance from a string.

ValidatesAttributes::getDateTime() — Method in class ValidatesAttributes

Get a DateTime instance from a string with no format.

ValidatesAttributes::getDistinctValues() — Method in class ValidatesAttributes

Get the values to distinct between.

ValidatesAttributes::getExistCount() — Method in class ValidatesAttributes

Get the number of records that exist in storage.

ValidatesAttributes::getUniqueIds() — Method in class ValidatesAttributes

Get the excluded ID column and value for the unique rule.

ValidatesAttributes::getUniqueExtra() — Method in class ValidatesAttributes

Get the extra conditions for a unique rule.

ValidatesAttributes::getQueryColumn() — Method in class ValidatesAttributes

Get the column name for an exists / unique query.

ValidatesAttributes::guessColumnForQuery() — Method in class ValidatesAttributes

Guess the database column from the given attribute name.

ValidatesAttributes::getExtraConditions() — Method in class ValidatesAttributes

Get the extra conditions for a unique / exists rule.

ValidatesAttributes::getSize() — Method in class ValidatesAttributes

Get the size of an attribute.

DatabasePresenceVerifier::getCount() — Method in class DatabasePresenceVerifier

Count the number of objects in a collection having the given value.

DatabasePresenceVerifier::getMultiCount() — Method in class DatabasePresenceVerifier

Count the number of objects in a collection with the given values.

Factory::getTranslator() — Method in class Factory

Get the Translator implementation.

Factory::getPresenceVerifier() — Method in class Factory

Get the Presence Verifier implementation.

Factory::getContainer() — Method in class Factory

Get the container instance used by the validation factory.

NotPwnedVerifier::getHash() — Method in class NotPwnedVerifier

Get the hash and its first 5 chars.

PresenceVerifierInterface::getCount() — Method in class PresenceVerifierInterface

Count the number of objects in a collection having the given value.

PresenceVerifierInterface::getMultiCount() — Method in class PresenceVerifierInterface

Count the number of objects in a collection with the given values.

Password::getErrorMessage() — Method in class Password

Get the translated password error message.

ValidatesWhenResolvedTrait::getValidatorInstance() — Method in class ValidatesWhenResolvedTrait

Get the validator instance for the request.

ValidationData::getLeadingExplicitAttributePath() — Method in class ValidationData

Get the explicit part of the attribute name.

ValidationException::getResponse() — Method in class ValidationException

Get the underlying response instance.

Validator::getExplicitKeys() — Method in class Validator

Get the explicit keys from an attribute flattened with dot notation.

Validator::getPrimaryAttribute() — Method in class Validator

Get the primary attribute name.

Validator::getMessageBag() — Method in class Validator

Get the messages for the instance.

Validator::getRule() — Method in class Validator

Get a rule and its parameters for a given attribute.

Validator::getData() — Method in class Validator

Get the data under validation.

Validator::getValue() — Method in class Validator

Get the value of a given attribute.

Validator::getRules() — Method in class Validator

Get the validation rules.

Validator::getRulesWithoutPlaceholders() — Method in class Validator

Get the validation rules with key placeholders removed.

Validator::getPresenceVerifier() — Method in class Validator

Get the Presence Verifier implementation.

Validator::getTranslator() — Method in class Validator

Get the Translator implementation.

BladeCompiler::getOpenAndClosingPhpTokens() — Method in class BladeCompiler

Get the open and closing PHP tag tokens from the given string.

BladeCompiler::getPath() — Method in class BladeCompiler

Get the path currently being compiled.

Compiler::getCompiledPath() — Method in class Compiler

Get the path to the compiled version of a view.

CompilerInterface::getCompiledPath() — Method in class CompilerInterface

Get the path to the compiled version of a view.

ComponentTagCompiler::guessAnonymousComponentUsingPaths() — Method in class ComponentTagCompiler

Attempt to find an anonymous component using the registered anonymous component paths.

ComponentTagCompiler::guessAnonymousComponentUsingNamespaces() — Method in class ComponentTagCompiler

Attempt to find an anonymous component using the registered anonymous component namespaces.

ComponentTagCompiler::guessClassName() — Method in class ComponentTagCompiler

Guess the class name for the given component.

ComponentTagCompiler::guessViewName() — Method in class ComponentTagCompiler

Guess the view name for the given component.

ComponentTagCompiler::getAttributesFromAttributeString() — Method in class ComponentTagCompiler

Get an array of attributes from the given attribute string.

CompilesEchos::getEchoMethods() — Method in class CompilesEchos

Get the echo methods in the proper order for compilation.

ComponentAttributeBag::get() — Method in class ComponentAttributeBag

Get a given attribute from the attribute array.

ComponentAttributeBag::getAttributes() — Method in class ComponentAttributeBag

Get all of the raw attributes.

ComponentAttributeBag::getIterator() — Method in class ComponentAttributeBag

Get an iterator for the items.

ManagesComponents::getConsumableComponentData() — Method in class ManagesComponents

Get an item from the component data that exists above the current component.

ManagesFragments::getFragment() — Method in class ManagesFragments

Get the contents of a fragment.

ManagesFragments::getFragments() — Method in class ManagesFragments

Get the entire array of rendered fragments.

ManagesLayouts::getSection() — Method in class ManagesLayouts

Get the contents of a section.

ManagesLayouts::getSections() — Method in class ManagesLayouts

Get the entire array of sections.

ManagesLoops::getLastLoop() — Method in class ManagesLoops

Get an instance of the last loop in the stack.

ManagesLoops::getLoopStack() — Method in class ManagesLoops

Get the entire loop stack.

CompilerEngine::get() — Method in class CompilerEngine

Get the evaluated contents of the view.

CompilerEngine::getMessage() — Method in class CompilerEngine

Get the exception message for an exception.

CompilerEngine::getCompiler() — Method in class CompilerEngine

Get the compiler implementation.

Engine::getLastRendered() — Method in class Engine

Get the last view that was rendered.

FileEngine::get() — Method in class FileEngine

Get the evaluated contents of the view.

PhpEngine::get() — Method in class PhpEngine

Get the evaluated contents of the view.

Factory::getEngineFromPath() — Method in class Factory

Get the appropriate view engine for the given path.

Factory::getExtension() — Method in class Factory

Get the extension used by the view file.

Factory::getExtensions() — Method in class Factory

Get the extension to engine bindings.

Factory::getEngineResolver() — Method in class Factory

Get the engine resolver instance.

Factory::getFinder() — Method in class Factory

Get the view finder instance.

Factory::getDispatcher() — Method in class Factory

Get the event dispatcher instance.

Factory::getContainer() — Method in class Factory

Get the IoC container instance.

Factory::getShared() — Method in class Factory

Get all of the shared data for the environment.

FileViewFinder::getPossibleViewFiles() — Method in class FileViewFinder

Get an array of possible view files.

FileViewFinder::getFilesystem() — Method in class FileViewFinder

Get the filesystem instance.

FileViewFinder::getPaths() — Method in class FileViewFinder

Get the active view paths.

FileViewFinder::getViews() — Method in class FileViewFinder

Get the views that have been located.

FileViewFinder::getHints() — Method in class FileViewFinder

Get the namespace to file path hints.

FileViewFinder::getExtensions() — Method in class FileViewFinder

Get registered extensions.

InvokableComponentVariable::getIterator() — Method in class InvokableComponentVariable

Get an interator instance for the variable.

View::getContents() — Method in class View

Get the evaluated contents of the view.

View::gatherData() — Method in class View

Get the data bound to the view instance.

View::getName() — Method in class View

Get the name of the view.

View::getData() — Method in class View

Get the array of view data.

View::getPath() — Method in class View

Get the path to the view file.

View::getFactory() — Method in class View

Get the view factory instance.

View::getEngine() — Method in class View

Get the view's rendering engine.

H

AuthorizationException::hasStatus() — Method in class AuthorizationException

Determine if the HTTP status code has been set.

Gate::has() — Method in class Gate

Determine if a given ability has been defined.

HandlesAuthorizationClass in namespace Illuminate\Auth\Access
AuthManager::hasResolvedGuards() — Method in class AuthManager

Determines if any guards have already been resolved.

ClearResetsCommand::handle() — Method in class ClearResetsCommand

Execute the console command.

$ DatabaseUserProvider#hasherProperty in class DatabaseUserProvider

The hasher implementation.

$ EloquentUserProvider#hasherProperty in class EloquentUserProvider

The hasher implementation.

GuardHelpers::hasUser() — Method in class GuardHelpers

Determine if the guard has a user instance.

SendEmailVerificationNotification::handle() — Method in class SendEmailVerificationNotification

Handle the event.

Authenticate::handle() — Method in class Authenticate

Handle an incoming request.

AuthenticateWithBasicAuth::handle() — Method in class AuthenticateWithBasicAuth

Handle an incoming request.

Authorize::handle() — Method in class Authorize

Handle an incoming request.

EnsureEmailIsVerified::handle() — Method in class EnsureEmailIsVerified

Handle an incoming request.

RequirePassword::handle() — Method in class RequirePassword

Handle an incoming request.

MustVerifyEmail::hasVerifiedEmail() — Method in class MustVerifyEmail

Determine if the user has verified their email address.

$ DatabaseTokenRepository#hasherProperty in class DatabaseTokenRepository

The Hasher implementation.

$ DatabaseTokenRepository#hashKeyProperty in class DatabaseTokenRepository

The hashing key.

Recaller::hash() — Method in class Recaller

Get the password from the recaller.

Recaller::hasAllSegments() — Method in class Recaller

Determine if the recaller has all segments.

SessionGuard::hasValidCredentials() — Method in class SessionGuard

Determine if the user matches the credentials.

$ TokenGuard#hashProperty in class TokenGuard

Indicates if the API token is hashed in storage.

BroadcastEvent::handle() — Method in class BroadcastEvent

Handle the queued job.

Batch::hasThenCallbacks() — Method in class Batch

Determine if the batch has "success" callbacks.

Batch::hasFailures() — Method in class Batch

Determine if the batch has job failures.

Batch::hasCatchCallbacks() — Method in class Batch

Determine if the batch has "catch" callbacks.

Batch::hasFinallyCallbacks() — Method in class Batch

Determine if the batch has "finally" callbacks.

$ Dispatcher#handlersProperty in class Dispatcher

The command to handler mapping for non-self-handling events.

Dispatcher::hasCommandHandler() — Method in class Dispatcher

Determine if the given command has a handler.

CacheTableCommand::handle() — Method in class CacheTableCommand

Execute the console command.

ClearCommand::handle() — Method in class ClearCommand

Execute the console command.

ForgetCommand::handle() — Method in class ForgetCommand

Execute the console command.

PruneStaleTagsCommand::handle() — Method in class PruneStaleTagsCommand

Execute the console command.

HasCacheLockClass in namespace Illuminate\Cache
RateLimiter::hit() — Method in class RateLimiter

Increment the counter for a given key for a given decay time.

Repository::has() — Method in class Repository

Determine if an item exists in the cache.

Repository::handleManyResult() — Method in class Repository

Handle a result for the "many" method.

Repository::has() — Method in class Repository

Determine if the given configuration value exists.

$ Command#helpProperty in class Command

The console command help text.

$ Command#hiddenProperty in class Command

Indicates whether the command should be shown in the Artisan command list.

CreatesMatchingTest::handleTestCreation() — Method in class CreatesMatchingTest

Create the matching test case if requested.

HasParametersClass in namespace Illuminate\Console\Concerns
InteractsWithIO::hasArgument() — Method in class InteractsWithIO

Determine if the given argument is present.

InteractsWithIO::hasOption() — Method in class InteractsWithIO

Determine if the given option is present.

ContainerCommandLoader::has() — Method in class ContainerCommandLoader

Determines if a command exists.

GeneratorCommand::handle() — Method in class GeneratorCommand

Execute the console command.

ManagesFrequencies::hourly() — Method in class ManagesFrequencies

Schedule the event to run hourly.

ManagesFrequencies::hourlyAt() — Method in class ManagesFrequencies

Schedule the event to run hourly at a given offset in the hour.

ScheduleClearCacheCommand::handle() — Method in class ScheduleClearCacheCommand

Execute the console command.

$ ScheduleFinishCommand#hiddenProperty in class ScheduleFinishCommand

Indicates whether the command should be shown in the Artisan command list.

ScheduleFinishCommand::handle() — Method in class ScheduleFinishCommand

Execute the console command.

ScheduleListCommand::handle() — Method in class ScheduleListCommand

Execute the console command.

$ ScheduleRunCommand#handlerProperty in class ScheduleRunCommand

The exception handler.

ScheduleRunCommand::handle() — Method in class ScheduleRunCommand

Execute the console command.

ScheduleTestCommand::handle() — Method in class ScheduleTestCommand

Execute the console command.

ScheduleWorkCommand::handle() — Method in class ScheduleWorkCommand

Execute the console command.

Container::has() — Method in class Container
{@inheritdoc}
Container::hasMethodBinding() — Method in class Container

Determine if the container has a method binding.

Container::hasParameterOverride() — Method in class Container

Determine if the given dependency has a parameter override.

Gate::has() — Method in class Gate

Determine if a given ability has been defined.

Guard::hasUser() — Method in class Guard

Determine if the guard has a user instance.

MustVerifyEmail::hasVerifiedEmail() — Method in class MustVerifyEmail

Determine if the user has verified their email address.

HasBroadcastChannelClass in namespace Illuminate\Contracts\Broadcasting
Dispatcher::hasCommandHandler() — Method in class Dispatcher

Determine if the given command has a handler.

Repository::has() — Method in class Repository

Determine if the given configuration value exists.

Kernel::handle() — Method in class Kernel

Handle an incoming console command.

Dispatcher::hasListeners() — Method in class Dispatcher

Determine if a given event has listeners.

Application::hasDebugModeEnabled() — Method in class Application

Determine if the application is running with debug mode enabled.

Application::hasBeenBootstrapped() — Method in class Application

Determine if the application has been bootstrapped before.

HasherClass in namespace Illuminate\Contracts\Hashing
Kernel::handle() — Method in class Kernel

Handle an incoming HTTP request.

CursorPaginator::hasPages() — Method in class CursorPaginator

Determine if there are enough items to split into multiple pages.

Paginator::hasPages() — Method in class Paginator

Determine if there are enough items to split into multiple pages.

Paginator::hasMorePages() — Method in class Paginator

Determine if there are more items in the data store.

HubClass in namespace Illuminate\Contracts\Pipeline
Job::hasFailed() — Method in class Job

Determine if the job has been marked as a failure.

Session::has() — Method in class Session

Checks if a key is present and not null.

Session::handlerNeedsRequest() — Method in class Session

Determine if the session handler needs a request.

HtmlableClass in namespace Illuminate\Contracts\Support
MessageBag::has() — Method in class MessageBag

Determine if messages exist for a given key.

HasLocalePreferenceClass in namespace Illuminate\Contracts\Translation
CookieJar::hasQueued() — Method in class CookieJar

Determine if a cookie has been queued.

AddQueuedCookiesToResponse::handle() — Method in class AddQueuedCookiesToResponse

Handle an incoming request.

EncryptCookies::handle() — Method in class EncryptCookies

Handle an incoming request.

ManagesTransactions::handleTransactionException() — Method in class ManagesTransactions

Handle an exception encountered when running a transacted statement.

ManagesTransactions::handleBeginTransactionException() — Method in class ManagesTransactions

Handle an exception from a transaction beginning.

ManagesTransactions::handleCommitTransactionException() — Method in class ManagesTransactions

Handle an exception encountered when committing a transaction.

ManagesTransactions::handleRollBackException() — Method in class ManagesTransactions

Handle an exception from a rollback.

Connection::handleQueryException() — Method in class Connection

Handle a query exception.

Connection::hasModifiedRecords() — Method in class Connection

Determine if the database connection has modified any database records.

ConnectionResolver::hasConnection() — Method in class ConnectionResolver

Check if a connection has been registered.

MySqlConnector::hasSocket() — Method in class MySqlConnector

Determine if the given configuration array has a UNIX socket value.

DbCommand::handle() — Method in class DbCommand

Execute the console command.

DumpCommand::handle() — Method in class DumpCommand

Execute the console command.

FreshCommand::handle() — Method in class FreshCommand

Execute the console command.

InstallCommand::handle() — Method in class InstallCommand

Execute the console command.

MigrateCommand::handle() — Method in class MigrateCommand

Execute the console command.

MigrateMakeCommand::handle() — Method in class MigrateMakeCommand

Execute the console command.

RefreshCommand::handle() — Method in class RefreshCommand

Execute the console command.

ResetCommand::handle() — Method in class ResetCommand

Execute the console command.

RollbackCommand::handle() — Method in class RollbackCommand

Execute the console command.

StatusCommand::handle() — Method in class StatusCommand

Execute the console command.

MonitorCommand::handle() — Method in class MonitorCommand

Execute the console command.

PruneCommand::handle() — Method in class PruneCommand

Execute the console command.

SeedCommand::handle() — Method in class SeedCommand

Execute the console command.

SeederMakeCommand::handle() — Method in class SeederMakeCommand

Execute the console command.

ShowCommand::handle() — Method in class ShowCommand

Execute the console command.

ShowModelCommand::handle() — Method in class ShowModelCommand

Execute the console command.

TableCommand::handle() — Method in class TableCommand

Execute the console command.

WipeCommand::handle() — Method in class WipeCommand

Execute the console command.

Builder::hydrate() — Method in class Builder

Create a collection of models from plain arrays.

Builder::hasNamedScope() — Method in class Builder

Determine if the given model has a scope.

Builder::hasMacro() — Method in class Builder

Checks if a macro is registered.

Builder::hasGlobalMacro() — Method in class Builder

Checks if a global macro is registered.

HasAttributesClass in namespace Illuminate\Database\Eloquent\Concerns
HasAttributes::handleLazyLoadingViolation() — Method in class HasAttributes

Handle a lazy loading violation.

HasAttributes::hasGetMutator() — Method in class HasAttributes

Determine if a get mutator exists for an attribute.

HasAttributes::hasAttributeMutator() — Method in class HasAttributes

Determine if a "Attribute" return type marked mutator exists for an attribute.

HasAttributes::hasAttributeGetMutator() — Method in class HasAttributes

Determine if a "Attribute" return type marked get mutator exists for an attribute.

HasAttributes::hasSetMutator() — Method in class HasAttributes

Determine if a set mutator exists for an attribute.

HasAttributes::hasAttributeSetMutator() — Method in class HasAttributes

Determine if an "Attribute" return type marked set mutator exists for an attribute.

HasAttributes::hasCast() — Method in class HasAttributes

Determine whether an attribute should be cast to a native type.

HasAttributes::hasChanges() — Method in class HasAttributes

Determine if any of the given attributes were changed when the model was last saved.

HasAttributes::hasAppended() — Method in class HasAttributes

Return whether the accessor attribute has been appended.

HasEventsClass in namespace Illuminate\Database\Eloquent\Concerns
HasGlobalScopesClass in namespace Illuminate\Database\Eloquent\Concerns
HasGlobalScopes::hasGlobalScope() — Method in class HasGlobalScopes

Determine if a model has a global scope.

HasRelationshipsClass in namespace Illuminate\Database\Eloquent\Concerns
HasRelationships::hasOne() — Method in class HasRelationships

Define a one-to-one relationship.

HasRelationships::hasOneThrough() — Method in class HasRelationships

Define a has-one-through relationship.

HasRelationships::hasMany() — Method in class HasRelationships

Define a one-to-many relationship.

HasRelationships::hasManyThrough() — Method in class HasRelationships

Define a has-many-through relationship.

HasTimestampsClass in namespace Illuminate\Database\Eloquent\Concerns
HasUlidsClass in namespace Illuminate\Database\Eloquent\Concerns
HasUniqueIdsClass in namespace Illuminate\Database\Eloquent\Concerns
HasUuidsClass in namespace Illuminate\Database\Eloquent\Concerns
HidesAttributesClass in namespace Illuminate\Database\Eloquent\Concerns
$ HidesAttributes#hiddenProperty in class HidesAttributes

The attributes that should be hidden for serialization.

QueriesRelationships::has() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query.

QueriesRelationships::hasNested() — Method in class QueriesRelationships

Add nested relationship count / exists conditions to the query.

QueriesRelationships::hasMorph() — Method in class QueriesRelationships

Add a polymorphic relationship count / exists condition to the query.

$ Factory#hasProperty in class Factory

The parent relationships that will be applied to the model.

Factory::has() — Method in class Factory

Define a child relationship for the model.

Factory::hasAttached() — Method in class Factory
HasFactoryClass in namespace Illuminate\Database\Eloquent\Factories
HigherOrderBuilderProxyClass in namespace Illuminate\Database\Eloquent
Model::handleLazyLoadingViolationUsing() — Method in class Model

Register a callback that is responsible for handling lazy loading violations.

Model::handleDiscardedAttributeViolationUsing() — Method in class Model

Register a callback that is responsible for handling discarded attribute violations.

Model::handleMissingAttributeViolationUsing() — Method in class Model

Register a callback that is responsible for handling missing attribute violations.

Model::hasNamedScope() — Method in class Model

Determine if the model has a given scope.

PendingHasThroughRelationship::has() — Method in class PendingHasThroughRelationship

Define the distant relationship that this model has.

BelongsToMany::hydratePivotRelation() — Method in class BelongsToMany

Hydrate the pivot table relationship on the models.

AsPivot::hasTimestampAttributes() — Method in class AsPivot

Determine if the pivot model or given attributes has timestamp attributes.

InteractsWithPivotTable::hasPivotColumn() — Method in class InteractsWithPivotTable

Determine whether the given column is defined as a pivot column.

HasManyClass in namespace Illuminate\Database\Eloquent\Relations
HasManyThroughClass in namespace Illuminate\Database\Eloquent\Relations
HasOneClass in namespace Illuminate\Database\Eloquent\Relations
HasOneOrManyClass in namespace Illuminate\Database\Eloquent\Relations
HasOneThroughClass in namespace Illuminate\Database\Eloquent\Relations
Migrator::hasRunAnyMigrations() — Method in class Migrator

Determine if any migrations have been run.

$ Builder#havingsProperty in class Builder

The having constraints for the query.

Builder::having() — Method in class Builder

Add a "having" clause to the query.

Builder::havingNested() — Method in class Builder

Add a nested having statement to the query.

Builder::havingNull() — Method in class Builder

Add a "having null" clause to the query.

Builder::havingNotNull() — Method in class Builder

Add a "having not null" clause to the query.

Builder::havingBetween() — Method in class Builder

Add a "having between " clause to the query.

Builder::havingRaw() — Method in class Builder

Add a raw having clause to the query.

Builder::hasTable() — Method in class Builder

Determine if the given table exists.

Builder::hasColumn() — Method in class Builder

Determine if the given table has a given column.

Builder::hasColumns() — Method in class Builder

Determine if the given table has given columns.

MySqlBuilder::hasTable() — Method in class MySqlBuilder

Determine if the given table exists.

PostgresBuilder::hasTable() — Method in class PostgresBuilder

Determine if the given table exists.

SchemaState::handleOutputUsing() — Method in class SchemaState

Specify the callback that should be used to handle process output.

Encrypter::hash() — Method in class Encrypter

Create a MAC for the given value.

CallQueuedListener::handle() — Method in class CallQueuedListener

Handle the queued job.

Dispatcher::hasListeners() — Method in class Dispatcher

Determine if a given event has listeners.

Dispatcher::hasWildcardListeners() — Method in class Dispatcher

Determine if the given event has any wildcard listeners.

Dispatcher::handlerShouldBeQueued() — Method in class Dispatcher

Determine if the event handler class should be queued.

Dispatcher::handlerShouldBeDispatchedAfterDatabaseTransactions() — Method in class Dispatcher

Determine if the given event handler should be dispatched after all database transactions have committed.

Dispatcher::handlerWantsToBeQueued() — Method in class Dispatcher

Determine if the event handler wants to be queued.

InvokeQueuedClosure::handle() — Method in class InvokeQueuedClosure

Handle the event.

NullDispatcher::hasListeners() — Method in class NullDispatcher

Determine if a given event has listeners.

Filesystem::hash() — Method in class Filesystem

Get the hash of the file at the given path.

Filesystem::hasSameHash() — Method in class Filesystem

Determine if two files are the same by comparing their hashes.

$ LockableFile#handleProperty in class LockableFile

The file resource.

$ Application#hasBeenBootstrappedProperty in class Application

Indicates if the application has been bootstrapped before.

Application::hasBeenBootstrapped() — Method in class Application

Determine if the application has been bootstrapped before.

Application::hasDebugModeEnabled() — Method in class Application

Determine if the application is running with debug mode enabled.

Application::handle() — Method in class Application
{@inheritdoc}
HandleExceptionsClass in namespace Illuminate\Foundation\Bootstrap
HandleExceptions::handleError() — Method in class HandleExceptions

Report PHP deprecations, or convert PHP errors to ErrorException instances.

HandleExceptions::handleDeprecationError() — Method in class HandleExceptions

Reports a deprecation to the "deprecations" logger.

HandleExceptions::handleException() — Method in class HandleExceptions

Handle an uncaught exception from the application.

HandleExceptions::handleShutdown() — Method in class HandleExceptions

Handle the PHP shutdown event.

AboutCommand::handle() — Method in class AboutCommand

Execute the console command.

AboutCommand::hasPhpFiles() — Method in class AboutCommand

Determine whether the given directory has PHP files.

ChannelListCommand::handle() — Method in class ChannelListCommand

Execute the console command.

ClearCompiledCommand::handle() — Method in class ClearCompiledCommand

Execute the console command.

ComponentMakeCommand::handle() — Method in class ComponentMakeCommand

Execute the console command.

ConfigCacheCommand::handle() — Method in class ConfigCacheCommand

Execute the console command.

ConfigClearCommand::handle() — Method in class ConfigClearCommand

Execute the console command.

$ DocsCommand#helpProperty in class DocsCommand

The console command help text.

$ DocsCommand#httpProperty in class DocsCommand

The HTTP client instance.

DocsCommand::handle() — Method in class DocsCommand

Execute the console command.

DownCommand::handle() — Method in class DownCommand

Execute the console command.

EnvironmentCommand::handle() — Method in class EnvironmentCommand

Execute the console command.

EnvironmentDecryptCommand::handle() — Method in class EnvironmentDecryptCommand

Execute the console command.

EnvironmentEncryptCommand::handle() — Method in class EnvironmentEncryptCommand

Execute the console command.

EventCacheCommand::handle() — Method in class EventCacheCommand

Execute the console command.

EventClearCommand::handle() — Method in class EventClearCommand

Execute the console command.

EventGenerateCommand::handle() — Method in class EventGenerateCommand

Execute the console command.

EventListCommand::handle() — Method in class EventListCommand

Execute the console command.

Kernel::handle() — Method in class Kernel

Run the console application.

KeyGenerateCommand::handle() — Method in class KeyGenerateCommand

Execute the console command.

LangPublishCommand::handle() — Method in class LangPublishCommand

Execute the console command.

MailMakeCommand::handle() — Method in class MailMakeCommand

Execute the console command.

ModelMakeCommand::handle() — Method in class ModelMakeCommand

Execute the console command.

NotificationMakeCommand::handle() — Method in class NotificationMakeCommand

Execute the console command.

OptimizeClearCommand::handle() — Method in class OptimizeClearCommand

Execute the console command.

OptimizeCommand::handle() — Method in class OptimizeCommand

Execute the console command.

PackageDiscoverCommand::handle() — Method in class PackageDiscoverCommand

Execute the console command.

QueuedCommand::handle() — Method in class QueuedCommand

Handle the job.

ResourceMakeCommand::handle() — Method in class ResourceMakeCommand

Execute the console command.

RouteCacheCommand::handle() — Method in class RouteCacheCommand

Execute the console command.

RouteClearCommand::handle() — Method in class RouteClearCommand

Execute the console command.

$ RouteListCommand#headersProperty in class RouteListCommand

The table headers for the command.

RouteListCommand::handle() — Method in class RouteListCommand

Execute the console command.

ServeCommand::handle() — Method in class ServeCommand

Execute the console command.

ServeCommand::host() — Method in class ServeCommand

Get the host for the command.

ServeCommand::handleProcessOutput() — Method in class ServeCommand

Returns a "callable" to handle the process output.

StorageLinkCommand::handle() — Method in class StorageLinkCommand

Execute the console command.

StubPublishCommand::handle() — Method in class StubPublishCommand

Execute the console command.

UpCommand::handle() — Method in class UpCommand

Execute the console command.

VendorPublishCommand::handle() — Method in class VendorPublishCommand

Execute the console command.

ViewCacheCommand::handle() — Method in class ViewCacheCommand

Execute the console command.

ViewClearCommand::handle() — Method in class ViewClearCommand

Execute the console command.

HandlerClass in namespace Illuminate\Foundation\Exceptions
ReportableHandler::handles() — Method in class ReportableHandler

Determine if the callback handles the given exception.

HtmlDumperClass in namespace Illuminate\Foundation\Http
Kernel::handle() — Method in class Kernel

Handle an incoming HTTP request.

Kernel::hasMiddleware() — Method in class Kernel

Determine if the kernel has a given middleware.

ConvertEmptyStringsToNull::handle() — Method in class ConvertEmptyStringsToNull

Handle an incoming request.

HandlePrecognitiveRequestsClass in namespace Illuminate\Foundation\Http\Middleware
HandlePrecognitiveRequests::handle() — Method in class HandlePrecognitiveRequests

Handle an incoming request.

PreventRequestsDuringMaintenance::handle() — Method in class PreventRequestsDuringMaintenance

Handle an incoming request.

PreventRequestsDuringMaintenance::hasValidBypassCookie() — Method in class PreventRequestsDuringMaintenance

Determine if the incoming request has a maintenance mode bypass cookie.

TransformsRequest::handle() — Method in class TransformsRequest

Handle an incoming request.

TrimStrings::handle() — Method in class TrimStrings

Handle an incoming request.

ValidatePostSize::handle() — Method in class ValidatePostSize

Handle an incoming request.

VerifyCsrfToken::handle() — Method in class VerifyCsrfToken

Handle an incoming request.

InteractsWithAuthentication::hasCredentials() — Method in class InteractsWithAuthentication

Return true if the credentials are valid, false otherwise.

InteractsWithExceptionHandling::handleExceptions() — Method in class InteractsWithExceptionHandling

Only handle the given exceptions via the exception handler.

InteractsWithExceptionHandling::handleValidationExceptions() — Method in class InteractsWithExceptionHandling

Only handle validation exceptions via the exception handler.

MakesHttpRequests::handle() — Method in class MakesHttpRequests
Wormhole::hour() — Method in class Wormhole

Travel forward the given number of hours.

Wormhole::hours() — Method in class Wormhole

Travel forward the given number of hours.

Wormhole::handleCallback() — Method in class Wormhole

Handle the given optional execution callback.

$ Vite#hotFileProperty in class Vite

The path to the "hot" file.

Vite::hotFile() — Method in class Vite

Get the Vite "hot" file path.

Vite::hotAsset() — Method in class Vite

Get the path to a given asset when running in HMR mode.

HashManagerClass in namespace Illuminate\Hashing
HashServiceProviderClass in namespace Illuminate\Hashing
HttpClientExceptionClass in namespace Illuminate\Http\Client
$ PendingRequest#handlerProperty in class PendingRequest

The Guzzle HTTP handler.

PendingRequest::head() — Method in class PendingRequest

Issue a HEAD request to the given URL.

$ Pool#handlerProperty in class Pool

The handler function for the Guzzle client.

Request::hasHeader() — Method in class Request

Determine if the request has a given header.

Request::hasHeaders() — Method in class Request

Determine if the request has the given headers.

Request::header() — Method in class Request

Get the values for the header with the given name.

Request::headers() — Method in class Request

Get the request headers.

Request::hasFile() — Method in class Request

Determine if the request contains the given file.

Response::header() — Method in class Response

Get a header from the response.

Response::headers() — Method in class Response

Get the headers from the response.

Response::handlerStats() — Method in class Response

Get the handler stats of the response.

InteractsWithInput::hasHeader() — Method in class InteractsWithInput

Determine if a header is set on the request.

InteractsWithInput::header() — Method in class InteractsWithInput

Retrieve a header from the request.

InteractsWithInput::has() — Method in class InteractsWithInput

Determine if the request contains a given input item key.

InteractsWithInput::hasAny() — Method in class InteractsWithInput

Determine if the request contains any of the given inputs.

InteractsWithInput::hasCookie() — Method in class InteractsWithInput

Determine if a cookie is set on the request.

InteractsWithInput::hasFile() — Method in class InteractsWithInput

Determine if the uploaded data contains a file.

HttpResponseExceptionClass in namespace Illuminate\Http\Exceptions
$ FileHelpers#hashNameProperty in class FileHelpers

The cache copy of the file's hash name.

FileHelpers::hashName() — Method in class FileHelpers

Get a filename for the file.

JsonResponse::hasValidJson() — Method in class JsonResponse

Determine if an error occurred during JSON encoding.

JsonResponse::hasEncodingOption() — Method in class JsonResponse

Determine if a JSON encoding option is set.

AddLinkHeadersForPreloadedAssets::handle() — Method in class AddLinkHeadersForPreloadedAssets

Handle the incoming request.

CheckResponseForModifications::handle() — Method in class CheckResponseForModifications

Handle an incoming request.

FrameGuard::handle() — Method in class FrameGuard

Handle the given request and get the response.

HandleCorsClass in namespace Illuminate\Http\Middleware
HandleCors::handle() — Method in class HandleCors

Handle the incoming request.

HandleCors::hasMatchingPath() — Method in class HandleCors

Get the path from the configuration to determine if the CORS service should run.

SetCacheHeaders::handle() — Method in class SetCacheHeaders

Add cache related HTTP headers.

TrustHosts::hosts() — Method in class TrustHosts

Get the host patterns that should be trusted.

TrustHosts::handle() — Method in class TrustHosts

Handle the incoming request.

$ TrustProxies#headersProperty in class TrustProxies

The proxy header mappings.

TrustProxies::handle() — Method in class TrustProxies

Handle an incoming request.

Request::host() — Method in class Request

Get the host name.

Request::httpHost() — Method in class Request

Get the HTTP host being requested.

Request::hasSession() — Method in class Request
{@inheritdoc}
Request::hasValidSignature() — Method in class Request
ResourceResponse::haveDefaultWrapperAndDataIsUnwrapped() — Method in class ResourceResponse

Determine if we have a default wrapper and the given data is unwrapped.

ResourceResponse::haveAdditionalInformationAndDataIsUnwrapped() — Method in class ResourceResponse

Determine if "with" data has been added and our data is unwrapped.

ResponseTrait::header() — Method in class ResponseTrait

Set a header on the Response.

$ Mailable#htmlProperty in class Mailable

The HTML to use for the message.

Mailable::hasFrom() — Method in class Mailable

Determine if the given recipient is set on the mailable.

Mailable::hasTo() — Method in class Mailable

Determine if the given recipient is set on the mailable.

Mailable::hasCc() — Method in class Mailable

Determine if the given recipient is set on the mailable.

Mailable::hasBcc() — Method in class Mailable

Determine if the given recipient is set on the mailable.

Mailable::hasReplyTo() — Method in class Mailable

Determine if the given replyTo is set on the mailable.

Mailable::hasRecipient() — Method in class Mailable

Determine if the given recipient is set on the mailable.

Mailable::hasSubject() — Method in class Mailable

Determine if the mailable has the given subject.

Mailable::html() — Method in class Mailable

Set the rendered HTML content for the message.

Mailable::hasAttachment() — Method in class Mailable

Determine if the mailable has the given attachment.

Mailable::hasAttachmentFromStorage() — Method in class Mailable

Determine if the mailable has the given attachment from storage.

Mailable::hasAttachmentFromStorageDisk() — Method in class Mailable

Determine if the mailable has the given attachment from a specific storage disk.

Mailable::hasAttachedData() — Method in class Mailable

Determine if the mailable has the given data as an attachment.

Mailable::hasTag() — Method in class Mailable

Determine if the mailable has the given tag.

Mailable::hasMetadata() — Method in class Mailable

Determine if the mailable has the given metadata.

$ Content#htmlProperty in class Content

The Blade view that should be rendered for the mailable.

$ Content#htmlStringProperty in class Content

The pre-rendered HTML of the message.

Content::html() — Method in class Content

Set the view for the message.

Content::htmlString() — Method in class Content

Set the pre-rendered HTML for the message.

Envelope::hasTo() — Method in class Envelope

Determine if the message has the given address as a recipient.

Envelope::hasCc() — Method in class Envelope

Determine if the message has the given address as a "cc" recipient.

Envelope::hasBcc() — Method in class Envelope

Determine if the message has the given address as a "bcc" recipient.

Envelope::hasReplyTo() — Method in class Envelope

Determine if the message has the given address as a "reply to" recipient.

Envelope::hasRecipient() — Method in class Envelope

Determine if the message has the given recipient.

Envelope::hasSubject() — Method in class Envelope

Determine if the message has the given subject.

Envelope::hasMetadata() — Method in class Envelope

Determine if the message has the given metadata.

HeadersClass in namespace Illuminate\Mail\Mailables
Mailer::html() — Method in class Mailer

Send a new message with only an HTML part.

Markdown::htmlComponentPaths() — Method in class Markdown

Get the HTML component paths.

SendQueuedMailable::handle() — Method in class SendQueuedMailable

Handle the queued job.

NotificationTableCommand::handle() — Method in class NotificationTableCommand

Execute the console command.

HasDatabaseNotificationsClass in namespace Illuminate\Notifications
SendQueuedNotifications::handle() — Method in class SendQueuedNotifications

Send the notifications.

AbstractPaginator::hasPages() — Method in class AbstractPaginator

Determine if there are enough items to split into multiple pages.

$ CursorPaginator#hasMoreProperty in class CursorPaginator

Indicates whether there are more items in the data source.

CursorPaginator::hasMorePages() — Method in class CursorPaginator

Determine if there are more items in the data source.

CursorPaginator::hasPages() — Method in class CursorPaginator

Determine if there are enough items to split into multiple pages.

LengthAwarePaginator::hasMorePages() — Method in class LengthAwarePaginator

Determine if there are more items in the data source.

$ Paginator#hasMoreProperty in class Paginator

Determine if there are more items in the data source.

Paginator::hasMorePagesWhen() — Method in class Paginator

Manually indicate that the paginator does have more pages.

Paginator::hasMorePages() — Method in class Paginator

Determine if there are more items in the data source.

UrlWindow::hasPages() — Method in class UrlWindow

Determine if the underlying paginator being presented has pages to show.

HubClass in namespace Illuminate\Pipeline
Pipeline::handleCarry() — Method in class Pipeline

Handle the value returned from each pipe before passing it to the next.

Pipeline::handleException() — Method in class Pipeline

Handle the given exception.

FakeInvokedProcess::hasReceivedSignal() — Method in class FakeInvokedProcess

Determine if the process has received the given signal.

CallQueuedClosure::handle() — Method in class CallQueuedClosure

Execute the job.

CallQueuedHandler::handleModelNotFound() — Method in class CallQueuedHandler

Handle a model not found exception.

BatchesTableCommand::handle() — Method in class BatchesTableCommand

Execute the console command.

ClearCommand::handle() — Method in class ClearCommand

Execute the console command.

FailedTableCommand::handle() — Method in class FailedTableCommand

Execute the console command.

FlushFailedCommand::handle() — Method in class FlushFailedCommand

Execute the console command.

ForgetFailedCommand::handle() — Method in class ForgetFailedCommand

Execute the console command.

$ ListFailedCommand#headersProperty in class ListFailedCommand

The table headers for the command.

ListFailedCommand::handle() — Method in class ListFailedCommand

Execute the console command.

ListenCommand::handle() — Method in class ListenCommand

Execute the console command.

MonitorCommand::handle() — Method in class MonitorCommand

Execute the console command.

PruneBatchesCommand::handle() — Method in class PruneBatchesCommand

Execute the console command.

PruneFailedJobsCommand::handle() — Method in class PruneFailedJobsCommand

Execute the console command.

RestartCommand::handle() — Method in class RestartCommand

Execute the console command.

RetryBatchCommand::handle() — Method in class RetryBatchCommand

Execute the console command.

RetryCommand::handle() — Method in class RetryCommand

Execute the console command.

TableCommand::handle() — Method in class TableCommand

Execute the console command.

WorkCommand::handle() — Method in class WorkCommand

Execute the console command.

Job::hasFailed() — Method in class Job

Determine if the job has been marked as a failure.

Listener::handleWorkerOutput() — Method in class Listener

Handle output from the worker process.

RateLimited::handle() — Method in class RateLimited

Process the job.

RateLimited::handleJob() — Method in class RateLimited

Handle a rate limited job.

RateLimitedWithRedis::handleJob() — Method in class RateLimitedWithRedis

Handle a rate limited job.

SkipIfBatchCancelled::handle() — Method in class SkipIfBatchCancelled

Process the job.

ThrottlesExceptions::handle() — Method in class ThrottlesExceptions

Process the job.

ThrottlesExceptionsWithRedis::handle() — Method in class ThrottlesExceptionsWithRedis

Process the job.

WithoutOverlapping::handle() — Method in class WithoutOverlapping

Process the job.

SyncQueue::handleException() — Method in class SyncQueue

Handle an exception that occurred while processing a job.

Worker::handleJobException() — Method in class Worker

Handle an exception that occurred while the job was running.

PhpRedisConnection::hmget() — Method in class PhpRedisConnection

Get the value of the given hash fields.

PhpRedisConnection::hmset() — Method in class PhpRedisConnection

Set the given hash fields to their respective values.

PhpRedisConnection::hsetnx() — Method in class PhpRedisConnection

Set the given hash field if it doesn't exist.

PhpRedisConnection::hscan() — Method in class PhpRedisConnection

Scans the given hash for all values based on options.

AbstractRouteCollection::handleMatchedRoute() — Method in class AbstractRouteCollection

Handle the matched route.

CompiledRouteCollection::hasNamedRoute() — Method in class CompiledRouteCollection

Determine if the route collection contains a given named route.

HasMiddlewareClass in namespace Illuminate\Routing\Controllers
HostValidatorClass in namespace Illuminate\Routing\Matching
SubstituteBindings::handle() — Method in class SubstituteBindings

Handle an incoming request.

ThrottleRequests::handle() — Method in class ThrottleRequests

Handle an incoming request.

ThrottleRequests::handleRequestUsingNamedLimiter() — Method in class ThrottleRequests

Handle an incoming request.

ThrottleRequests::handleRequest() — Method in class ThrottleRequests

Handle an incoming request.

ThrottleRequestsWithRedis::handleRequest() — Method in class ThrottleRequestsWithRedis

Handle an incoming request.

ValidateSignature::handle() — Method in class ValidateSignature

Handle an incoming request.

Pipeline::handleCarry() — Method in class Pipeline

Handles the value returned from each pipe before passing it to the next.

Pipeline::handleException() — Method in class Pipeline

Handle the given exception.

Route::hasParameters() — Method in class Route

Determine if the route has parameters.

Route::hasParameter() — Method in class Route

Determine a given parameter exists from the route.

Route::httpOnly() — Method in class Route

Determine if the route only responds to HTTP requests.

Route::httpsOnly() — Method in class Route

Determine if the route only responds to HTTPS requests.

RouteCollection::hasNamedRoute() — Method in class RouteCollection

Determine if the route collection contains a given named route.

RouteCollectionInterface::hasNamedRoute() — Method in class RouteCollectionInterface

Determine if the route collection contains a given named route.

Router::hasMiddlewareGroup() — Method in class Router

Check if a middlewareGroup with the given name exists.

Router::hasGroupStack() — Method in class Router

Determine if the router currently has a group stack.

Router::has() — Method in class Router

Check if a route with the given name exists.

UrlGenerator::hasValidSignature() — Method in class UrlGenerator

Determine if the given request has a valid signature.

UrlGenerator::hasValidRelativeSignature() — Method in class UrlGenerator

Determine if the given request has a valid signature for a relative URL.

UrlGenerator::hasCorrectSignature() — Method in class UrlGenerator

Determine if the signature from the given request matches the URL.

SessionTableCommand::handle() — Method in class SessionTableCommand

Execute the console command.

AuthenticateSession::handle() — Method in class AuthenticateSession

Handle an incoming request.

StartSession::handle() — Method in class StartSession

Handle an incoming request.

StartSession::handleRequestWhileBlocking() — Method in class StartSession

Handle the given request within session state.

StartSession::handleStatefulRequest() — Method in class StartSession

Handle the given request within session state.

$ Store#handlerProperty in class Store

The session handler implementation.

Store::has() — Method in class Store

Checks if a key is present and not null.

Store::hasOldInput() — Method in class Store

Determine if the session contains old input.

Store::handlerNeedsRequest() — Method in class Store

Determine if the session handler needs a request.

SymfonySessionDecorator::has() — Method in class SymfonySessionDecorator
{@inheritdoc}
Arr::has() — Method in class Arr

Check if an item or items exist in an array using "dot" notation.

Arr::hasAny() — Method in class Arr

Determine if any of the keys exist in an array using "dot" notation.

Collection::has() — Method in class Collection

Determine if an item exists in the collection by key.

Collection::hasAny() — Method in class Collection

Determine if any of the keys exist in the collection.

DateFactory::hasFormat() — Method in class DateFactory
DateFactory::hasMacro() — Method in class DateFactory
DateFactory::hasRelativeKeywords() — Method in class DateFactory
DateFactory::hasTestNow() — Method in class DateFactory
Enumerable::has() — Method in class Enumerable

Determine if an item exists in the collection by key.

Enumerable::hasAny() — Method in class Enumerable

Determine if any of the keys exist in the collection.

App::hasBeenBootstrapped() — Method in class App
App::hasDebugModeEnabled() — Method in class App
App::handle() — Method in class App
App::has() — Method in class App
App::hasMethodBinding() — Method in class App
App::hasMacro() — Method in class App
Artisan::handle() — Method in class Artisan
Auth::hasResolvedGuards() — Method in class Auth
Auth::hasUser() — Method in class Auth
Auth::hasMacro() — Method in class Auth
Bus::hasCommandHandler() — Method in class Bus
Bus::hasDispatched() — Method in class Bus
Bus::hasDispatchedSync() — Method in class Bus
Bus::hasDispatchedAfterResponse() — Method in class Bus
Cache::has() — Method in class Cache
Cache::hasMacro() — Method in class Cache
Config::has() — Method in class Config
Config::hasMacro() — Method in class Config
Cookie::has() — Method in class Cookie

Determine if a cookie exists on the request.

Cookie::hasQueued() — Method in class Cookie
Cookie::hasMacro() — Method in class Cookie
DB::hasMacro() — Method in class DB
DB::hasModifiedRecords() — Method in class DB
Date::hasFormat() — Method in class Date
Date::hasMacro() — Method in class Date
Date::hasRelativeKeywords() — Method in class Date
Date::hasTestNow() — Method in class Date
Event::hasListeners() — Method in class Event
Event::hasWildcardListeners() — Method in class Event
Event::hasMacro() — Method in class Event
Event::hasDispatched() — Method in class Event
File::hash() — Method in class File
File::hasSameHash() — Method in class File
File::hasMacro() — Method in class File
Gate::has() — Method in class Gate
HashClass in namespace Illuminate\Support\Facades
HttpClass in namespace Illuminate\Support\Facades
Http::hasMacro() — Method in class Http
Http::head() — Method in class Http
Lang::hasForLocale() — Method in class Lang
Lang::has() — Method in class Lang
Lang::hasMacro() — Method in class Lang
Mail::html() — Method in class Mail
Mail::hasMacro() — Method in class Mail
Mail::hasSent() — Method in class Mail
Mail::hasQueued() — Method in class Mail
Notification::hasSent() — Method in class Notification
Notification::hasMacro() — Method in class Notification
Process::hasMacro() — Method in class Process
Queue::hasPushed() — Method in class Queue
RateLimiter::hit() — Method in class RateLimiter
Redirect::hasMacro() — Method in class Redirect
Redis::hasMacro() — Method in class Redis
Request::host() — Method in class Request
Request::httpHost() — Method in class Request
Request::hasSession() — Method in class Request
Request::hasPreviousSession() — Method in class Request
Request::hasHeader() — Method in class Request
Request::header() — Method in class Request
Request::has() — Method in class Request
Request::hasAny() — Method in class Request
Request::hasCookie() — Method in class Request
Request::hasFile() — Method in class Request
Request::hasMacro() — Method in class Request
Request::hasValidSignature() — Method in class Request
Response::hasMacro() — Method in class Response
Route::hasMiddlewareGroup() — Method in class Route
Route::hasGroupStack() — Method in class Route
Route::has() — Method in class Route
Route::hasMacro() — Method in class Route
Schema::hasTable() — Method in class Schema
Schema::hasColumn() — Method in class Schema
Schema::hasColumns() — Method in class Schema
Session::has() — Method in class Session
Session::hasOldInput() — Method in class Session
Session::handlerNeedsRequest() — Method in class Session
Session::hasMacro() — Method in class Session
Storage::hasMacro() — Method in class Storage
Storage::has() — Method in class Storage
URL::hasValidSignature() — Method in class URL
URL::hasValidRelativeSignature() — Method in class URL
URL::hasCorrectSignature() — Method in class URL
URL::hasMacro() — Method in class URL
View::hasRenderedOnce() — Method in class View
View::hasMacro() — Method in class View
View::hasSection() — Method in class View
Vite::hotFile() — Method in class Vite
Vite::hasMacro() — Method in class Vite
HigherOrderCollectionProxyClass in namespace Illuminate\Support
HigherOrderTapProxyClass in namespace Illuminate\Support
HigherOrderWhenProxyClass in namespace Illuminate\Support
$ HigherOrderWhenProxy#hasConditionProperty in class HigherOrderWhenProxy

Indicates whether the proxy has a condition.

HtmlStringClass in namespace Illuminate\Support
$ HtmlString#htmlProperty in class HtmlString

The HTML string.

LazyCollection::has() — Method in class LazyCollection

Determine if an item exists in the collection by key.

LazyCollection::hasAny() — Method in class LazyCollection

Determine if any of the keys exist in the collection.

MessageBag::has() — Method in class MessageBag

Determine if messages exist for all of the given keys.

MessageBag::hasAny() — Method in class MessageBag

Determine if messages exist for any of the given keys.

Str::headline() — Method in class Str

Convert the given string to title case for each word.

Stringable::headline() — Method in class Stringable

Convert the given string to title case for each word.

BusFake::hasDispatched() — Method in class BusFake

Determine if there are any stored commands for a given class.

BusFake::hasDispatchedSync() — Method in class BusFake

Determine if there are any stored commands for a given class.

BusFake::hasDispatchedAfterResponse() — Method in class BusFake

Determine if there are any stored commands for a given class.

BusFake::hasCommandHandler() — Method in class BusFake

Determine if the given command has a handler.

EventFake::hasDispatched() — Method in class EventFake

Determine if the given event has been dispatched.

EventFake::hasListeners() — Method in class EventFake

Determine if a given event has listeners.

MailFake::hasSent() — Method in class MailFake

Determine if the given mailable has been sent.

MailFake::hasQueued() — Method in class MailFake

Determine if the given mailable has been queued.

NotificationFake::hasSent() — Method in class NotificationFake

Determine if there are more notifications left to inspect.

QueueFake::hasPushed() — Method in class QueueFake

Determine if there are any stored jobs for a given class.

Macroable::hasMacro() — Method in class Macroable

Checks if macro is registered.

ValidatedInput::has() — Method in class ValidatedInput

Determine if the validated input has one or more keys.

ViewErrorBag::hasBag() — Method in class ViewErrorBag

Checks if a named MessageBag exists in the bags.

HasInDatabaseClass in namespace Illuminate\Testing\Constraints
HasClass in namespace Illuminate\Testing\Fluent\Concerns
Has::has() — Method in class Has

Ensure that the given prop exists.

Has::hasAll() — Method in class Has

Assert that all of the given props exist.

Has::hasAny() — Method in class Has

Assert that at least one of the given props exists.

Matching::has() — Method in class Matching

Ensure that the given prop exists.

$ PendingCommand#hasExecutedProperty in class PendingCommand

Determine if the command has executed.

$ FileLoader#hintsProperty in class FileLoader

All of the namespace hints.

Translator::hasForLocale() — Method in class Translator

Determine if a translation exists for a given locale.

Translator::has() — Method in class Translator

Determine if a translation exists.

Dimensions::height() — Method in class Dimensions

Set the "height" constraint.

Validator::hasNotFailedPreviousRuleIfPresenceRule() — Method in class Validator

Determine if it's a necessary presence validation.

Validator::hasRule() — Method in class Validator

Determine if the given attribute has a rule in the given set.

ComponentAttributeBag::has() — Method in class ComponentAttributeBag

Determine if a given attribute exists in the attribute array.

ManagesLayouts::hasSection() — Method in class ManagesLayouts

Check if section exists.

CompilerEngine::handleViewException() — Method in class CompilerEngine

Handle a view exception.

PhpEngine::handleViewException() — Method in class PhpEngine

Handle a view exception.

Factory::hasRenderedOnce() — Method in class Factory

Determine if the given once token has been rendered.

$ FileViewFinder#hintsProperty in class FileViewFinder

The namespace to file path hints.

FileViewFinder::hasHintInformation() — Method in class FileViewFinder

Returns whether or not the view name has any hint information.

ShareErrorsFromSession::handle() — Method in class ShareErrorsFromSession

Handle an incoming request.

I

Gate::inspect() — Method in class Gate

Inspect the user for the given ability.

GuardHelpers::id() — Method in class GuardHelpers

Get the ID for the currently authenticated user.

Authorize::isClassName() — Method in class Authorize

Checks if the given string looks like a fully qualified class name.

Recaller::id() — Method in class Recaller

Get the user ID from the recaller.

SessionGuard::id() — Method in class SessionGuard

Get the ID for the currently authenticated user.

$ TokenGuard#inputKeyProperty in class TokenGuard

The name of the query string item from the request containing the API token.

AblyBroadcaster::isGuardedChannel() — Method in class AblyBroadcaster

Return true if the channel is protected by authentication.

Broadcaster::isImplicitlyBindable() — Method in class Broadcaster

Determine if a given key and parameter is implicitly bindable.

UsePusherChannelConventions::isGuardedChannel() — Method in class UsePusherChannelConventions

Return true if the channel is protected by authentication.

InteractsWithBroadcastingClass in namespace Illuminate\Broadcasting
InteractsWithSocketsClass in namespace Illuminate\Broadcasting
$ Batch#idProperty in class Batch

The batch ID.

Batch::incrementFailedJobs() — Method in class Batch

Increment the failed jobs for the batch.

Batch::invokeHandlerCallback() — Method in class Batch

Invoke a batch callback handler.

BatchRepository::incrementTotalJobs() — Method in class BatchRepository

Increment the total number of jobs within the batch.

BatchRepository::incrementFailedJobs() — Method in class BatchRepository

Increment the total number of failed jobs for the batch.

DatabaseBatchRepository::incrementTotalJobs() — Method in class DatabaseBatchRepository

Increment the total number of jobs within the batch.

DatabaseBatchRepository::incrementFailedJobs() — Method in class DatabaseBatchRepository

Increment the total number of failed jobs for the batch.

Queueable::invokeChainCatchCallbacks() — Method in class Queueable

Invoke all of the chain's failed job callbacks.

ApcStore::increment() — Method in class ApcStore

Increment the value of an item in the cache.

ApcWrapper::increment() — Method in class ApcWrapper

Increment the value of an item in the cache.

ArrayStore::increment() — Method in class ArrayStore

Increment the value of an item in the cache.

DatabaseStore::increment() — Method in class DatabaseStore

Increment the value of an item in the cache.

DatabaseStore::incrementOrDecrement() — Method in class DatabaseStore

Increment or decrement an item in the cache.

DynamoDbStore::isExpired() — Method in class DynamoDbStore

Determine if the given item is expired.

DynamoDbStore::increment() — Method in class DynamoDbStore

Increment the value of an item in the cache.

FileStore::increment() — Method in class FileStore

Increment the value of an item in the cache.

Lock::isOwnedByCurrentProcess() — Method in class Lock

Determines whether this lock is allowed to release the lock in the driver.

MemcachedStore::increment() — Method in class MemcachedStore

Increment the value of an item in the cache.

NullStore::increment() — Method in class NullStore

Increment the value of an item in the cache.

RedisStore::increment() — Method in class RedisStore

Increment the value of an item in the cache.

RedisTaggedCache::increment() — Method in class RedisTaggedCache

Increment the value of an item in the cache.

Repository::increment() — Method in class Repository

Increment the value of an item in the cache.

Repository::itemKey() — Method in class Repository

Format the key for a cache item.

TaggedCache::increment() — Method in class TaggedCache

Increment the value of an item in the cache.

TaggedCache::itemKey() — Method in class TaggedCache

Format the key for a cache item.

$ Repository#itemsProperty in class Repository

All of the configuration items.

Command::isHidden() — Method in class Command
{@inheritdoc}
InteractsWithIOClass in namespace Illuminate\Console\Concerns
$ InteractsWithIO#inputProperty in class InteractsWithIO

The input interface implementation.

InteractsWithIO::info() — Method in class InteractsWithIO

Write a string as information output.

InteractsWithSignalsClass in namespace Illuminate\Console\Concerns
PromptsForMissingInput::interact() — Method in class PromptsForMissingInput

Interact with the user before validating the input.

$ CommandFinished#inputProperty in class CommandFinished

The console input implementation.

$ CommandStarting#inputProperty in class CommandStarting

The console input implementation.

GeneratorCommand::isReservedName() — Method in class GeneratorCommand

Checks whether the given name is reserved.

OutputStyle::isQuiet() — Method in class OutputStyle

Returns whether verbosity is quiet (-q).

OutputStyle::isVerbose() — Method in class OutputStyle

Returns whether verbosity is verbose (-v).

OutputStyle::isVeryVerbose() — Method in class OutputStyle

Returns whether verbosity is very verbose (-vv).

OutputStyle::isDebug() — Method in class OutputStyle

Returns whether verbosity is debug (-vvv).

Event::isDue() — Method in class Event

Determine if the given event should run based on the Cron expression.

Signals::initializeSignal() — Method in class Signals

Gets the signal's existing handler in array format.

Factory::info() — Method in class Factory
InfoClass in namespace Illuminate\Console\View\Components
BoundMethod::isCallableWithAtSign() — Method in class BoundMethod

Determine if the given string is in [email protected] syntax.

$ Container#instanceProperty in class Container

The current globally available container (if any).

$ Container#instancesProperty in class Container

The container's shared instances.

Container::isShared() — Method in class Container

Determine if a given type is shared.

Container::isAlias() — Method in class Container

Determine if a given string is an alias.

Container::instance() — Method in class Container

Register an existing instance as shared in the container.

Container::isBuildable() — Method in class Container

Determine if the given concrete is buildable.

Gate::inspect() — Method in class Gate

Inspect the user for the given ability.

Guard::id() — Method in class Guard

Get the ID for the currently authenticated user.

Repository::increment() — Method in class Repository

Increment the value of an item in the cache.

Store::increment() — Method in class Store

Increment the value of an item in the cache.

IsolatableClass in namespace Illuminate\Contracts\Console
Container::instance() — Method in class Container

Register an existing instance as shared in the container.

DeviatesCastableAttributes::increment() — Method in class DeviatesCastableAttributes

Increment the attribute.

SupportsPartialRelations::isOneOfMany() — Method in class SupportsPartialRelations

Determine whether the relationship is a one-of-many relationship.

$ ModelIdentifier#idProperty in class ModelIdentifier

The unique identifier of the model.

Application::isDownForMaintenance() — Method in class Application

Determine if the application is currently down for maintenance.

Hasher::info() — Method in class Hasher

Get information about the given hashed value.

CursorPaginator::items() — Method in class CursorPaginator

Get all of the items being paginated.

CursorPaginator::isEmpty() — Method in class CursorPaginator

Determine if the list of items is empty or not.

CursorPaginator::isNotEmpty() — Method in class CursorPaginator

Determine if the list of items is not empty.

Paginator::items() — Method in class Paginator

Get all of the items being paginated.

Paginator::isEmpty() — Method in class Paginator

Determine if the list of items is empty or not.

Paginator::isNotEmpty() — Method in class Paginator

Determine if the list of items is not empty.

InvokedProcessClass in namespace Illuminate\Contracts\Process
InvokedProcess::id() — Method in class InvokedProcess

Get the process ID if the process is still running.

Job::isReleased() — Method in class Job

Determine if the job was released back into the queue.

Job::isDeleted() — Method in class Job

Determine if the job has been deleted.

Job::isDeletedOrReleased() — Method in class Job

Determine if the job has been deleted or released.

Session::invalidate() — Method in class Session

Flush the session data and regenerate the ID.

Session::isStarted() — Method in class Session

Determine if the session has been started.

MessageBag::isEmpty() — Method in class MessageBag

Determine if the message bag has any messages.

MessageBag::isNotEmpty() — Method in class MessageBag

Determine if the message bag has any messages.

ImplicitRuleClass in namespace Illuminate\Contracts\Validation
InvokableRuleClass in namespace Illuminate\Contracts\Validation
EncryptCookies::isDisabled() — Method in class EncryptCookies

Determine whether encryption has been disabled for the given cookie.

Connection::insert() — Method in class Connection

Run an insert statement against the database.

Connection::isDoctrineAvailable() — Method in class Connection

Is Doctrine available?

ConnectionInterface::insert() — Method in class ConnectionInterface

Run an insert statement against the database.

DatabaseInspectionCommand::installDependencies() — Method in class DatabaseInspectionCommand

Install the command's dependencies.

InstallCommandClass in namespace Illuminate\Database\Console\Migrations
PruneCommand::isPrunable() — Method in class PruneCommand

Determine if the given model class is prunable.

TableCommand::indexes() — Method in class TableCommand

Get the information regarding the table's indexes.

Builder::isNestedUnder() — Method in class Builder

Determine if the relationship is nested.

Builder::increment() — Method in class Builder

Increment a column's value by a given amount.

Collection::intersect() — Method in class Collection

Intersect the collection with the given items.

GuardsAttributes::isUnguarded() — Method in class GuardsAttributes

Determine if the current state is "unguarded".

GuardsAttributes::isFillable() — Method in class GuardsAttributes

Determine if the given attribute may be mass assigned.

GuardsAttributes::isGuarded() — Method in class GuardsAttributes

Determine if the given key is guarded.

GuardsAttributes::isGuardableColumn() — Method in class GuardsAttributes

Determine if the given column is a valid, guardable column.

HasAttributes::isRelation() — Method in class HasAttributes

Determine if the given key is a relationship method on the model.

HasAttributes::isCustomDateTimeCast() — Method in class HasAttributes

Determine if the cast type is a custom date time cast.

HasAttributes::isImmutableCustomDateTimeCast() — Method in class HasAttributes

Determine if the cast type is an immutable custom date time cast.

HasAttributes::isDecimalCast() — Method in class HasAttributes

Determine if the cast type is a decimal cast.

HasAttributes::isDateAttribute() — Method in class HasAttributes

Determine if the given attribute is a date or date castable.

HasAttributes::isStandardDateFormat() — Method in class HasAttributes

Determine if the given value is a standard date format.

HasAttributes::isDateCastable() — Method in class HasAttributes

Determine whether a value is Date / DateTime castable for inbound manipulation.

HasAttributes::isDateCastableWithCustomFormat() — Method in class HasAttributes

Determine whether a value is Date / DateTime custom-castable for inbound manipulation.

HasAttributes::isJsonCastable() — Method in class HasAttributes

Determine whether a value is JSON castable for inbound manipulation.

HasAttributes::isEncryptedCastable() — Method in class HasAttributes

Determine whether a value is an encrypted castable for inbound manipulation.

HasAttributes::isClassCastable() — Method in class HasAttributes

Determine if the given key is cast using a custom class.

HasAttributes::isEnumCastable() — Method in class HasAttributes

Determine if the given key is cast using an enum.

HasAttributes::isClassDeviable() — Method in class HasAttributes

Determine if the key is deviable using a custom class.

HasAttributes::isClassSerializable() — Method in class HasAttributes

Determine if the key is serializable using a custom class.

HasAttributes::isDirty() — Method in class HasAttributes

Determine if the model or any of the given attribute(s) have been modified.

HasAttributes::isClean() — Method in class HasAttributes

Determine if the model or all the given attribute(s) have remained the same.

$ HasTimestamps#ignoreTimestampsOnProperty in class HasTimestamps

The list of models classes that have timestamps temporarily disabled.

HasTimestamps::isIgnoringTimestamps() — Method in class HasTimestamps

Determine if the given model is ignoring timestamps / touches.

HasUlids::initializeHasUlids() — Method in class HasUlids

Initialize the trait.

HasUuids::initializeHasUuids() — Method in class HasUuids

Initialize the trait.

$ Sequence#indexProperty in class Sequence

The current index of the sequence iteration.

InvalidCastExceptionClass in namespace Illuminate\Database\Eloquent
$ Model#incrementingProperty in class Model

Indicates if the IDs are auto-incrementing.

$ Model#ignoreOnTouchProperty in class Model

The list of models classes that should not be affected with touch.

$ Model#isBroadcastingProperty in class Model

Indicates if broadcasting is currently enabled.

Model::initializeTraits() — Method in class Model

Initialize any initializable traits on the model.

Model::isIgnoringTouch() — Method in class Model

Determine if the given model is ignoring touches.

Model::increment() — Method in class Model

Increment a column's value by a given amount.

Model::incrementOrDecrement() — Method in class Model

Run the increment or decrement method on the model.

Model::incrementQuietly() — Method in class Model

Increment a column's value by a given amount without raising any events.

Model::insertAndSetId() — Method in class Model

Insert the given attributes and set the ID on the model.

Model::is() — Method in class Model

Determine if two models have the same ID and belong to the same table.

Model::isNot() — Method in class Model

Determine if two models are not the same.

$ ModelNotFoundException#idsProperty in class ModelNotFoundException

The affected model IDs.

BelongsTo::initRelation() — Method in class BelongsTo

Initialize the relation on a set of models.

BelongsToMany::initRelation() — Method in class BelongsToMany

Initialize the relation on a set of models.

$ CanBeOneOfMany#isOneOfManyProperty in class CanBeOneOfMany

Determines whether the relationship is one-of-many.

CanBeOneOfMany::isOneOfMany() — Method in class CanBeOneOfMany

Determine whether the relationship is a one-of-many relationship.

ComparesRelatedModels::is() — Method in class ComparesRelatedModels

Determine if the model is the related instance of the relationship.

ComparesRelatedModels::isNot() — Method in class ComparesRelatedModels

Determine if the model is not the related instance of the relationship.

InteractsWithDictionaryClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
InteractsWithPivotTableClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
HasMany::initRelation() — Method in class HasMany

Initialize the relation on a set of models.

HasManyThrough::initRelation() — Method in class HasManyThrough

Initialize the relation on a set of models.

HasOne::initRelation() — Method in class HasOne

Initialize the relation on a set of models.

HasOneThrough::initRelation() — Method in class HasOneThrough

Initialize the relation on a set of models.

MorphMany::initRelation() — Method in class MorphMany

Initialize the relation on a set of models.

MorphOne::initRelation() — Method in class MorphOne

Initialize the relation on a set of models.

$ MorphToMany#inverseProperty in class MorphToMany

Indicates if we are connecting the inverse of the relation.

$ Pivot#incrementingProperty in class Pivot

Indicates if the IDs are auto-incrementing.

Relation::initRelation() — Method in class Relation

Initialize the relation on a set of models.

SoftDeletes::initializeSoftDeletes() — Method in class SoftDeletes

Initialize the soft deleting trait for an instance.

SoftDeletes::isForceDeleting() — Method in class SoftDeletes

Determine if the model is currently force deleting.

Grammar::isJsonSelector() — Method in class Grammar

Determine if the given string is a JSON selector.

Grammar::isExpression() — Method in class Grammar

Determine if the given value is a raw expression.

MySqlConnection::isMaria() — Method in class MySqlConnection

Determine if the connected database is a MariaDB database.

$ Builder#indexHintProperty in class Builder

The index hint for the query.

Builder::ignoreIndex() — Method in class Builder

Add an index hint to ignore a query index.

Builder::invalidOperatorAndValue() — Method in class Builder

Determine if the given operator and value combination is legal.

Builder::invalidOperator() — Method in class Builder

Determine if the given operator is supported.

Builder::isBitwiseOperator() — Method in class Builder

Determine if the operator is a bitwise operator.

Builder::inRandomOrder() — Method in class Builder

Put the query's results in random order.

Builder::implode() — Method in class Builder

Concatenate values of a given column as a string.

Builder::insert() — Method in class Builder

Insert new records into the database.

Builder::insertOrIgnore() — Method in class Builder

Insert new records into the database while ignoring errors.

Builder::insertGetId() — Method in class Builder

Insert a new record and get the value of the primary key.

Builder::insertUsing() — Method in class Builder

Insert new records into the table using a subquery.

Builder::increment() — Method in class Builder

Increment a column's value by a given amount.

Builder::incrementEach() — Method in class Builder

Increment the given column's values by the given amounts.

Builder::isQueryable() — Method in class Builder

Determine if the value is a query builder instance or a Closure.

IndexHintClass in namespace Illuminate\Database\Query
$ IndexHint#indexProperty in class IndexHint

The name of the index.

Blueprint::index() — Method in class Blueprint

Specify an index for the table.

Blueprint::id() — Method in class Blueprint

Create a new auto-incrementing big integer (8-byte) column on the table.

Blueprint::increments() — Method in class Blueprint

Create a new auto-incrementing integer (4-byte) column on the table.

Blueprint::integerIncrements() — Method in class Blueprint

Create a new auto-incrementing integer (4-byte) column on the table.

Blueprint::integer() — Method in class Blueprint

Create a new integer (4-byte) column on the table.

Blueprint::ipAddress() — Method in class Blueprint

Create a new IP address column on the table.

Blueprint::indexCommand() — Method in class Blueprint

Add a new index command to the blueprint.

ColumnDefinition::index() — Method in class ColumnDefinition

Add an index

ColumnDefinition::invisible() — Method in class ColumnDefinition
ForeignKeyDefinition::initiallyImmediate() — Method in class ForeignKeyDefinition
IndexDefinitionClass in namespace Illuminate\Database\Schema
IndexDefinition::initiallyImmediate() — Method in class IndexDefinition
InvokeQueuedClosureClass in namespace Illuminate\Events
Filesystem::isDirectory() — Method in class Filesystem

Determine if the given path is a directory.

Filesystem::isEmptyDirectory() — Method in class Filesystem

Determine if the given path is a directory that does not contain any other files or directories.

Filesystem::isReadable() — Method in class Filesystem

Determine if the given path is readable.

Filesystem::isWritable() — Method in class Filesystem

Determine if the given path is writable.

Filesystem::isFile() — Method in class Filesystem

Determine if the given path is a file.

$ LockableFile#isLockedProperty in class LockableFile

Indicates if the file is locked.

$ AliasLoader#instanceProperty in class AliasLoader

The singleton instance of the loader.

AliasLoader::isRegistered() — Method in class AliasLoader

Indicates if the loader has been registered.

$ Application#isRunningInConsoleProperty in class Application

Indicates if the application is running in the console.

Application::isLocal() — Method in class Application

Determine if the application is in the local environment.

Application::isProduction() — Method in class Application

Determine if the application is in the production environment.

Application::isBooted() — Method in class Application

Determine if the application has booted.

Application::isDownForMaintenance() — Method in class Application

Determine if the application is currently down for maintenance.

Application::isDeferredService() — Method in class Application

Determine if the given service is a deferred service.

Application::isLocale() — Method in class Application

Determine if the application locale is the given locale.

HandleExceptions::isDeprecation() — Method in class HandleExceptions

Determine if the error level is a deprecation.

HandleExceptions::isFatal() — Method in class HandleExceptions

Determine if the error type is fatal.

ResolvesDumpSource::isCompiledViewFile() — Method in class ResolvesDumpSource

Determine if the given file is a view compiled.

DocsCommand::isSearching() — Method in class DocsCommand

Determine if the command is intended to perform a search.

RouteListCommand::isVendorRoute() — Method in class RouteListCommand

Determine if the route has been defined outside of the application.

RouteListCommand::isFrameworkController() — Method in class RouteListCommand

Determine if the route uses a framework controller.

StorageLinkCommand::isRemovableSymlink() — Method in class StorageLinkCommand

Determine if the provided path is a symlink that can be removed.

$ Handler#internalDontReportProperty in class Handler

A list of the internal exception types that should not be reported.

Handler::ignore() — Method in class Handler

Indicate that the given exception type should not be reported.

Handler::invalid() — Method in class Handler

Convert a validation exception into a response.

Handler::invalidJson() — Method in class Handler

Convert a validation exception into a JSON response.

Handler::isHttpException() — Method in class Handler

Determine if the given exception is an HTTP exception.

MaintenanceModeBypassCookie::isValid() — Method in class MaintenanceModeBypassCookie

Determine if the given maintenance mode bypass cookie is valid.

PreventRequestsDuringMaintenance::inExceptArray() — Method in class PreventRequestsDuringMaintenance

Determine if the request has a URI that should be accessible in maintenance mode.

VerifyCsrfToken::isReading() — Method in class VerifyCsrfToken

Determine if the HTTP request uses a ‘read’ verb.

VerifyCsrfToken::inExceptArray() — Method in class VerifyCsrfToken

Determine if the request has a URI that should pass through CSRF verification.

InspiringClass in namespace Illuminate\Foundation
InteractsWithAuthenticationClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithAuthentication::isAuthenticated() — Method in class InteractsWithAuthentication

Return true if the user is authenticated, false otherwise.

InteractsWithConsoleClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithContainerClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithContainer::instance() — Method in class InteractsWithContainer

Register an instance of an object in the container.

InteractsWithDatabaseClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithDatabase::isSoftDeletableModel() — Method in class InteractsWithDatabase

Determine if the argument is a soft deletable model.

InteractsWithDeprecationHandlingClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithExceptionHandlingClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithRedisClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithRedis::ifRedisAvailable() — Method in class InteractsWithRedis

Run test if redis is available.

InteractsWithSessionClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithTimeClass in namespace Illuminate\Foundation\Testing\Concerns
InteractsWithViewsClass in namespace Illuminate\Foundation\Testing\Concerns
$ Vite#integrityKeyProperty in class Vite

The key to check for integrity hashes within the manifest.

Vite::isCssPath() — Method in class Vite

Determine whether the given path is a CSS file.

Vite::isRunningHot() — Method in class Vite

Determine if the HMR server is running.

AbstractHasher::info() — Method in class AbstractHasher

Get information about the given hashed value.

HashManager::info() — Method in class HashManager

Get information about the given hashed value.

Request::isForm() — Method in class Request

Determine if the request is simple form data.

Request::isJson() — Method in class Request

Determine if the request is JSON.

Request::isMultipart() — Method in class Request

Determine if the request is multipart.

ResponseSequence::isEmpty() — Method in class ResponseSequence

Indicate that this sequence has depleted all of its responses.

CanBePrecognitive::isAttemptingPrecognition() — Method in class CanBePrecognitive

Determine if the request is attempting to be precognitive.

CanBePrecognitive::isPrecognitive() — Method in class CanBePrecognitive

Determine if the request is precognitive.

InteractsWithContentTypesClass in namespace Illuminate\Http\Concerns
InteractsWithContentTypes::isJson() — Method in class InteractsWithContentTypes

Determine if the request is sending JSON.

InteractsWithFlashDataClass in namespace Illuminate\Http\Concerns
InteractsWithInputClass in namespace Illuminate\Http\Concerns
InteractsWithInput::isNotFilled() — Method in class InteractsWithInput

Determine if the request contains an empty value for an input item.

InteractsWithInput::isEmptyString() — Method in class InteractsWithInput

Determine if the given input key is an empty string for "filled".

InteractsWithInput::input() — Method in class InteractsWithInput

Retrieve an input item from the request.

InteractsWithInput::integer() — Method in class InteractsWithInput

Retrieve input as an integer value.

InteractsWithInput::isValidFile() — Method in class InteractsWithInput

Check that the given file is a valid file instance.

Request::instance() — Method in class Request

Return the Request instance.

Request::is() — Method in class Request

Determine if the current request URI matches a pattern.

Request::ip() — Method in class Request

Get the client IP address.

Request::ips() — Method in class Request

Get the client IP addresses.

MissingValue::isMissing() — Method in class MissingValue

Determine if the object should be considered "missing".

PotentiallyMissing::isMissing() — Method in class PotentiallyMissing

Determine if the object should be considered "missing".

File::image() — Method in class File

Create a new fake image.

FileFactory::image() — Method in class FileFactory

Create a new fake image.

LogManager::info() — Method in class LogManager

Interesting events.

Logger::info() — Method in class Logger

Log an informational message to the logs.

Attachment::isEquivalent() — Method in class Attachment

Determine if the given attachment is equivalent to this attachment.

Envelope::isFrom() — Method in class Envelope

Determine if the message is from the given address.

$ DatabaseNotification#incrementingProperty in class DatabaseNotification

Indicates if the IDs are auto-incrementing.

$ SimpleMessage#introLinesProperty in class SimpleMessage

The "intro" lines of the notification.

$ Notification#idProperty in class Notification

The unique identifier for the notification.

$ AbstractCursorPaginator#itemsProperty in class AbstractCursorPaginator

All of the items being paginated.

AbstractCursorPaginator::items() — Method in class AbstractCursorPaginator

Get the slice of items being paginated.

AbstractCursorPaginator::isEmpty() — Method in class AbstractCursorPaginator

Determine if the list of items is empty.

AbstractCursorPaginator::isNotEmpty() — Method in class AbstractCursorPaginator

Determine if the list of items is not empty.

$ AbstractPaginator#itemsProperty in class AbstractPaginator

All of the items being paginated.

AbstractPaginator::isValidPageNumber() — Method in class AbstractPaginator

Determine if the given value is a valid page number.

AbstractPaginator::items() — Method in class AbstractPaginator

Get the slice of items being paginated.

AbstractPaginator::isEmpty() — Method in class AbstractPaginator

Determine if the list of items is empty.

AbstractPaginator::isNotEmpty() — Method in class AbstractPaginator

Determine if the list of items is not empty.

Factory::isRecording() — Method in class Factory

Determine if the process factory has fake process handlers and is recording processes.

FakeInvokedProcess::id() — Method in class FakeInvokedProcess

Get the process ID if the process is still running.

FakeInvokedProcess::invokeOutputHandlerWithNextLineOfOutput() — Method in class FakeInvokedProcess

Invoke the asynchronous output handler with the next single line of output if necessary.

FakeProcessDescription::id() — Method in class FakeProcessDescription

Specify the process ID that should be assigned to the process.

FakeProcessDescription::iterations() — Method in class FakeProcessDescription

Specify how many times the "isRunning" method should return "true".

FakeProcessSequence::isEmpty() — Method in class FakeProcessSequence

Indicate that this sequence has depleted all of its process results.

InvokedProcessClass in namespace Illuminate\Process
InvokedProcess::id() — Method in class InvokedProcess

Get the process ID if the process is still running.

InvokedProcessPoolClass in namespace Illuminate\Process
$ InvokedProcessPool#invokedProcessesProperty in class InvokedProcessPool

The array of invoked processes.

$ PendingProcess#idleTimeoutProperty in class PendingProcess

The maximum number of seconds the process may go without returning output.

$ PendingProcess#inputProperty in class PendingProcess

The standard input data that should be piped into the command.

PendingProcess::idleTimeout() — Method in class PendingProcess

Specify the maximum number of seconds a process may go without returning output.

PendingProcess::input() — Method in class PendingProcess

Set the standard input that should be provided when invoking the process.

DatabaseQueue::isAvailable() — Method in class DatabaseQueue

Modify the query to check for available jobs.

DatabaseQueue::isReservedButExpired() — Method in class DatabaseQueue

Modify the query to check for jobs that are reserved but have expired.

$ JobQueued#idProperty in class JobQueued

The job ID.

InteractsWithQueueClass in namespace Illuminate\Queue
InvalidPayloadExceptionClass in namespace Illuminate\Queue
DatabaseJobRecord::increment() — Method in class DatabaseJobRecord

Increment the number of times the job has been attempted.

$ Job#instanceProperty in class Job

The job handler instance.

Job::isDeleted() — Method in class Job

Determine if the job has been deleted.

Job::isReleased() — Method in class Job

Determine if the job was released back into the queue.

Job::isDeletedOrReleased() — Method in class Job

Determine if the job has been deleted or released.

$ Worker#isDownForMaintenanceProperty in class Worker

The callback used to determine if the application is in maintenance mode.

InvalidSignatureExceptionClass in namespace Illuminate\Routing\Exceptions
ImplicitRouteBindingClass in namespace Illuminate\Routing
$ ValidateSignature#ignoreProperty in class ValidateSignature

The names of the parameters that should be ignored.

Redirector::intended() — Method in class Redirector

Create a new redirect response to the previously intended location.

$ Route#isFallbackProperty in class Route

Indicates whether the route is a fallback route.

Route::isControllerAction() — Method in class Route

Checks whether the route's action is a controller.

Route::isSerializedClosure() — Method in class Route

Determine if the route action is a serialized Closure.

Router::input() — Method in class Router

Get a route parameter for the current route.

Router::is() — Method in class Router

Alias for the "currentRouteNamed" method.

UrlGenerator::isValidUrl() — Method in class UrlGenerator

Determine if the given path is a valid URL.

DatabaseSessionHandler::ipAddress() — Method in class DatabaseSessionHandler

Get the IP address for the current request.

$ Store#idProperty in class Store

The session ID.

Store::increment() — Method in class Store

Increment the value of an item in the session.

Store::invalidate() — Method in class Store

Flush the session data and regenerate the ID.

Store::isStarted() — Method in class Store

Determine if the session has been started.

Store::isValidId() — Method in class Store

Determine if this is a valid session ID.

SymfonySessionDecorator::invalidate() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::isStarted() — Method in class SymfonySessionDecorator
{@inheritdoc}
$ AggregateServiceProvider#instancesProperty in class AggregateServiceProvider

An array of the service provider instances.

Arr::isAssoc() — Method in class Arr

Determines if an array is associative.

Arr::isList() — Method in class Arr

Determines if an array is a list.

$ Collection#itemsProperty in class Collection
Collection::implode() — Method in class Collection

Concatenate values of a given key as a string.

Collection::intersect() — Method in class Collection

Intersect the collection with the given items.

Collection::intersectUsing() — Method in class Collection

Intersect the collection with the given items, using the callback.

Collection::intersectAssoc() — Method in class Collection

Intersect the collection with the given items with additional index check.

Collection::intersectAssocUsing() — Method in class Collection

Intersect the collection with the given items with additional index check, using the callback.

Collection::intersectByKeys() — Method in class Collection

Intersect the collection with the given items by key.

Collection::isEmpty() — Method in class Collection

Determine if the collection is empty or not.

DateFactory::instance() — Method in class DateFactory
DateFactory::isImmutable() — Method in class DateFactory
DateFactory::isModifiableUnit() — Method in class DateFactory
DateFactory::isMutable() — Method in class DateFactory
DateFactory::isStrictModeEnabled() — Method in class DateFactory
Enumerable::implode() — Method in class Enumerable

Concatenate values of a given key as a string.

Enumerable::intersect() — Method in class Enumerable

Intersect the collection with the given items.

Enumerable::intersectByKeys() — Method in class Enumerable

Intersect the collection with the given items by key.

Enumerable::isEmpty() — Method in class Enumerable

Determine if the collection is empty or not.

Enumerable::isNotEmpty() — Method in class Enumerable

Determine if the collection is not empty.

App::isLocal() — Method in class App
App::isProduction() — Method in class App
App::isBooted() — Method in class App
App::isDownForMaintenance() — Method in class App
App::isDeferredService() — Method in class App
App::isLocale() — Method in class App
App::isShared() — Method in class App
App::isAlias() — Method in class App
App::instance() — Method in class App
Auth::id() — Method in class Auth
Blade::if() — Method in class Blade
Blade::include() — Method in class Blade
Blade::isExpired() — Method in class Blade
Cache::increment() — Method in class Cache
DB::insert() — Method in class DB
DB::isDoctrineAvailable() — Method in class DB
Date::instance() — Method in class Date
Date::isImmutable() — Method in class Date
Date::isModifiableUnit() — Method in class Date
Date::isMutable() — Method in class Date
Date::isStrictModeEnabled() — Method in class Date
Facade::isMock() — Method in class Facade

Determines whether a mock is set as the instance of the facade.

Facade::isFake() — Method in class Facade

Determines whether a "fake" has been set as the facade instance.

File::isDirectory() — Method in class File
File::isEmptyDirectory() — Method in class File
File::isReadable() — Method in class File
File::isWritable() — Method in class File
File::isFile() — Method in class File
Gate::inspect() — Method in class Gate
Hash::info() — Method in class Hash
Log::info() — Method in class Log
Process::idleTimeout() — Method in class Process
Process::input() — Method in class Process
Process::isRecording() — Method in class Process
Redirect::intended() — Method in class Redirect
Request::instance() — Method in class Request
Request::is() — Method in class Request
Request::ip() — Method in class Request
Request::ips() — Method in class Request
Request::initialize() — Method in class Request
Request::isSecure() — Method in class Request
Request::isMethod() — Method in class Request
Request::isMethodSafe() — Method in class Request
Request::isMethodIdempotent() — Method in class Request
Request::isMethodCacheable() — Method in class Request
Request::isNoCache() — Method in class Request
Request::isXmlHttpRequest() — Method in class Request
Request::isFromTrustedProxy() — Method in class Request
Request::isAttemptingPrecognition() — Method in class Request
Request::isPrecognitive() — Method in class Request
Request::isJson() — Method in class Request
Request::isNotFilled() — Method in class Request
Request::input() — Method in class Request
Request::integer() — Method in class Request
Route::input() — Method in class Route
Route::is() — Method in class Route
Session::increment() — Method in class Session
Session::invalidate() — Method in class Session
Session::isStarted() — Method in class Session
Session::isValidId() — Method in class Session
URL::isValidUrl() — Method in class URL
Validator::includeUnvalidatedArrayKeys() — Method in class Validator
View::incrementRender() — Method in class View
View::inject() — Method in class View
View::incrementLoopIndices() — Method in class View
Vite::isRunningHot() — Method in class Vite
HtmlString::isEmpty() — Method in class HtmlString

Determine if the given HTML string is empty.

HtmlString::isNotEmpty() — Method in class HtmlString

Determine if the given HTML string is not empty.

InteractsWithTimeClass in namespace Illuminate\Support
ItemNotFoundExceptionClass in namespace Illuminate\Support
LazyCollection::implode() — Method in class LazyCollection

Concatenate values of a given key as a string.

LazyCollection::intersect() — Method in class LazyCollection

Intersect the collection with the given items.

LazyCollection::intersectUsing() — Method in class LazyCollection

Intersect the collection with the given items, using the callback.

LazyCollection::intersectAssoc() — Method in class LazyCollection

Intersect the collection with the given items with additional index check.

LazyCollection::intersectAssocUsing() — Method in class LazyCollection

Intersect the collection with the given items with additional index check, using the callback.

LazyCollection::intersectByKeys() — Method in class LazyCollection

Intersect the collection with the given items by key.

LazyCollection::isEmpty() — Method in class LazyCollection

Determine if the items are empty or not.

MessageBag::isUnique() — Method in class MessageBag

Determine if a key and message combination already exists.

MessageBag::isEmpty() — Method in class MessageBag

Determine if the message bag has any messages.

MessageBag::isNotEmpty() — Method in class MessageBag

Determine if the message bag has any messages.

$ MultipleInstanceManager#instancesProperty in class MultipleInstanceManager

The array of resolved instances.

MultipleInstanceManager::instance() — Method in class MultipleInstanceManager

Get an instance instance by name.

$ Pluralizer#inflectorProperty in class Pluralizer

The cached inflector instance.

Pluralizer::inflector() — Method in class Pluralizer

Get the inflector instance.

ProcessUtils::isSurroundedBy() — Method in class ProcessUtils

Is the given string surrounded by the given character?

Reflector::isCallable() — Method in class Reflector

This is a PHP 7.4 compatible implementation of is_callable.

Reflector::isParameterSubclassOf() — Method in class Reflector

Determine if the parameter's type is a subclass of the given type.

Reflector::isParameterBackedEnumWithStringBackingType() — Method in class Reflector

Determine if the parameter's type is a Backed Enum with a string backing type.

ServiceProvider::isDeferred() — Method in class ServiceProvider

Determine if the provider is deferred.

Str::is() — Method in class Str

Determine if a given string matches a given pattern.

Str::isAscii() — Method in class Str

Determine if a given string is 7 bit ASCII.

Str::isJson() — Method in class Str

Determine if a given string is valid JSON.

Str::isUuid() — Method in class Str

Determine if a given string is a valid UUID.

Str::isUlid() — Method in class Str

Determine if a given string is a valid ULID.

Str::inlineMarkdown() — Method in class Str

Converts inline Markdown into HTML.

Str::isMatch() — Method in class Str

Determine if a given string matches a given pattern.

Stringable::is() — Method in class Stringable

Determine if a given string matches a given pattern.

Stringable::isAscii() — Method in class Stringable

Determine if a given string is 7 bit ASCII.

Stringable::isJson() — Method in class Stringable

Determine if a given string is valid JSON.

Stringable::isUuid() — Method in class Stringable

Determine if a given string is a valid UUID.

Stringable::isUlid() — Method in class Stringable

Determine if a given string is a valid ULID.

Stringable::isEmpty() — Method in class Stringable

Determine if the given string is empty.

Stringable::isNotEmpty() — Method in class Stringable

Determine if the given string is not empty.

Stringable::inlineMarkdown() — Method in class Stringable

Convert inline Markdown into HTML.

Stringable::isMatch() — Method in class Stringable

Determine if a given string matches a given pattern.

BatchFake::incrementFailedJobs() — Method in class BatchFake

Increment the failed jobs for the batch.

BatchRepositoryFake::incrementTotalJobs() — Method in class BatchRepositoryFake

Increment the total number of jobs within the batch.

BatchRepositoryFake::incrementFailedJobs() — Method in class BatchRepositoryFake

Increment the total number of failed jobs for the batch.

BusFake::isChainOfObjects() — Method in class BusFake

Determine if the given chain is entirely composed of objects.

QueueFake::isChainOfObjects() — Method in class QueueFake

Determine if the given chain is entirely composed of objects.

$ CapsuleManagerTrait#instanceProperty in class CapsuleManagerTrait

The current globally used instance.

EnumeratesValues::isNotEmpty() — Method in class EnumeratesValues

Determine if the collection is not empty.

EnumeratesValues::identity() — Method in class EnumeratesValues

Make a function that returns what's passed to it.

$ ValidatedInput#inputProperty in class ValidatedInput

The underlying input.

InvalidArgumentExceptionClass in namespace Illuminate\Testing\Exceptions
Has::interactsWith() — Method in class Has

Marks the property as interacted.

InteractionClass in namespace Illuminate\Testing\Fluent\Concerns
$ Interaction#interactedProperty in class Interaction

The list of interacted properties.

Interaction::interactsWith() — Method in class Interaction

Marks the property as interacted.

Interaction::interacted() — Method in class Interaction

Asserts that all properties have been interacted with.

$ ParallelConsoleOutput#ignoreProperty in class ParallelConsoleOutput

The output that should be ignored.

ParallelTesting::inParallel() — Method in class ParallelTesting

Indicates if the current tests are been run in parallel.

Translator::isLoaded() — Method in class Translator

Determine if the given group has been loaded.

FilterEmailValidation::isValid() — Method in class FilterEmailValidation

Returns true if the given email is valid.

ValidatesAttributes::isValidFileInstance() — Method in class ValidatesAttributes

Check that the given value is a valid file instance.

ValidatesAttributes::isSameType() — Method in class ValidatesAttributes

Check if the parameters are of the same type.

$ Factory#implicitExtensionsProperty in class Factory

All of the custom implicit validator extensions.

Factory::includeUnvalidatedArrayKeys() — Method in class Factory

Indicate that unvalidated array keys should be included in validated data when the parent array is validated.

InvokableValidationRuleClass in namespace Illuminate\Validation
$ InvokableValidationRule#invokableProperty in class InvokableValidationRule

The invokable that validates the attribute.

Rule::in() — Method in class Rule

Get an in constraint builder instance.

Rule::imageFile() — Method in class Rule

Get an image file constraint builder instance.

File::image() — Method in class File

Limit the uploaded file to only image types.

ImageFileClass in namespace Illuminate\Validation\Rules
InClass in namespace Illuminate\Validation\Rules
$ Unique#ignoreProperty in class Unique

The ID that should be ignored.

$ Unique#idColumnProperty in class Unique

The name of the ID column.

Unique::ignore() — Method in class Unique

Ignore the given ID during the unique check.

Unique::ignoreModel() — Method in class Unique

Ignore the given model during the unique check.

ValidationData::initializeAndGatherData() — Method in class ValidationData

Initialize and gather data for the given attribute.

ValidationData::initializeAttributeOnData() — Method in class ValidationData

Gather a copy of the attribute data filled with any missing attributes.

$ ValidationRuleParser#implicitAttributesProperty in class ValidationRuleParser

The implicit attributes.

$ Validator#initialRulesProperty in class Validator

The initial rules provided.

$ Validator#implicitAttributesProperty in class Validator

The array of wildcard attributes with their asterisks expanded.

$ Validator#implicitAttributesFormatterProperty in class Validator

The callback that should be used to format the attribute.

$ Validator#implicitRulesProperty in class Validator

The validation rules that imply the field is required.

Validator::isValidatable() — Method in class Validator

Determine if the attribute is validatable.

Validator::isImplicit() — Method in class Validator

Determine if a given rule implies the attribute is required.

Validator::isNotNullIfMarkedAsNullable() — Method in class Validator

Determine if the attribute fails the nullable check.

Validator::invalid() — Method in class Validator

Returns the data which was invalid.

Compiler::isExpired() — Method in class Compiler

Determine if the view at the given path is expired.

CompilerInterface::isExpired() — Method in class CompilerInterface

Determine if the given view is expired.

Component::ignoredMethods() — Method in class Component

Get the methods that should be ignored.

ComponentSlot::isEmpty() — Method in class ComponentSlot

Determine if the slot is empty.

ComponentSlot::isNotEmpty() — Method in class ComponentSlot

Determine if the slot is not empty.

ManagesLayouts::inject() — Method in class ManagesLayouts

Inject inline content into a section.

ManagesLoops::incrementLoopIndices() — Method in class ManagesLoops

Increment the top loop's indices.

Factory::incrementRender() — Method in class Factory

Increment the rendering counter.

InvokableComponentVariableClass in namespace Illuminate\View

J

Batch::jsonSerialize() — Method in class Batch

Get the JSON serializable representation of the object.

$ PendingBatch#jobsProperty in class PendingBatch

The jobs that belong to the batch.

Schedule::job() — Method in class Schedule

Add a new job callback event to the schedule.

JobClass in namespace Illuminate\Contracts\Queue
ResponseFactory::json() — Method in class ResponseFactory

Create a new JSON response instance.

ResponseFactory::jsonp() — Method in class ResponseFactory

Create a new JSONP response instance.

JsonableClass in namespace Illuminate\Contracts\Support
ArrayObject::jsonSerialize() — Method in class ArrayObject

Get the array that should be JSON serialized.

HasRelationships::joiningTable() — Method in class HasRelationships

Get the joining table name for a many-to-many relation.

HasRelationships::joiningTableSegment() — Method in class HasRelationships

Get this model's half of the intermediate table name for belongsToMany relationships.

JsonEncodingExceptionClass in namespace Illuminate\Database\Eloquent
Model::jsonSerialize() — Method in class Model

Convert the object into something JSON serializable.

$ Builder#joinsProperty in class Builder

The table joins for the query.

Builder::join() — Method in class Builder

Add a join clause to the query.

Builder::joinWhere() — Method in class Builder

Add a "join where" clause to the query.

Builder::joinSub() — Method in class Builder

Add a subquery join clause to the query.

JoinClauseClass in namespace Illuminate\Database\Query
Blueprint::json() — Method in class Blueprint

Create a new json column on the table.

Blueprint::jsonb() — Method in class Blueprint

Create a new jsonb column on the table.

Filesystem::json() — Method in class Filesystem

Get the contents of a file as decoded JSON.

Application::joinPaths() — Method in class Application

Join the given paths together.

$ PendingChain#jobProperty in class PendingChain

The class name of the job being dispatched.

$ PendingDispatch#jobProperty in class PendingDispatch

The job.

JobMakeCommandClass in namespace Illuminate\Foundation\Console
Request::json() — Method in class Request

Get the JSON decoded body of the request.

Response::json() — Method in class Response

Get the JSON decoded body of the response as an array or scalar value.

JsonResponseClass in namespace Illuminate\Http
$ Request#jsonProperty in class Request

The decoded JSON content for the request.

Request::json() — Method in class Request

Get the JSON payload for the request.

CollectsResources::jsonOptions() — Method in class CollectsResources

Get the JSON serialization options that should be applied to the resource response.

JsonResourceClass in namespace Illuminate\Http\Resources\Json
JsonResource::jsonOptions() — Method in class JsonResource

Get the JSON serialization options that should be applied to the resource response.

JsonResource::jsonSerialize() — Method in class JsonResource

Prepare the resource for JSON serialization.

CursorPaginator::jsonSerialize() — Method in class CursorPaginator

Convert the object into something JSON serializable.

LengthAwarePaginator::jsonSerialize() — Method in class LengthAwarePaginator

Convert the object into something JSON serializable.

Paginator::jsonSerialize() — Method in class Paginator

Convert the object into something JSON serializable.

JobExceptionOccurredClass in namespace Illuminate\Queue\Events
$ JobExceptionOccurred#jobProperty in class JobExceptionOccurred

The job instance.

JobFailedClass in namespace Illuminate\Queue\Events
$ JobFailed#jobProperty in class JobFailed

The job instance.

JobPoppedClass in namespace Illuminate\Queue\Events
$ JobPopped#jobProperty in class JobPopped

The job instance.

JobPoppingClass in namespace Illuminate\Queue\Events
JobProcessedClass in namespace Illuminate\Queue\Events
$ JobProcessed#jobProperty in class JobProcessed

The job instance.

JobProcessingClass in namespace Illuminate\Queue\Events
$ JobProcessing#jobProperty in class JobProcessing

The job instance.

JobQueuedClass in namespace Illuminate\Queue\Events
$ JobQueued#jobProperty in class JobQueued

The job instance.

JobReleasedAfterExceptionClass in namespace Illuminate\Queue\Events
$ JobReleasedAfterException#jobProperty in class JobReleasedAfterException

The job instance.

JobRetryRequestedClass in namespace Illuminate\Queue\Events
$ JobRetryRequested#jobProperty in class JobRetryRequested

The job instance.

$ InteractsWithQueue#jobProperty in class InteractsWithQueue

The underlying queue job instance.

$ BeanstalkdJob#jobProperty in class BeanstalkdJob

The Pheanstalk job instance.

$ DatabaseJob#jobProperty in class DatabaseJob

The database job payload.

JobClass in namespace Illuminate\Queue\Jobs
JobNameClass in namespace Illuminate\Queue\Jobs
$ RedisJob#jobProperty in class RedisJob

The Redis raw job payload.

$ SqsJob#jobProperty in class SqsJob

The Amazon SQS job instance.

$ SyncJob#jobProperty in class SyncJob

The class name of the job.

Queue::jobShouldBeEncrypted() — Method in class Queue

Determine if the job should be encrypted.

ResponseFactory::json() — Method in class ResponseFactory

Create a new JSON response instance.

ResponseFactory::jsonp() — Method in class ResponseFactory

Create a new JSONP response instance.

Arr::join() — Method in class Arr

Join all items using a string. The final items can use a separate glue string.

Collection::join() — Method in class Collection

Join all items from the collection using a string. The final items can use a separate glue string.

Enumerable::join() — Method in class Enumerable

Join all items from the collection using a string. The final items can use a separate glue string.

Enumerable::jsonSerialize() — Method in class Enumerable

Convert the object into something JSON serializable.

App::joinPaths() — Method in class App
File::json() — Method in class File
Request::json() — Method in class Request
Response::json() — Method in class Response
Response::jsonp() — Method in class Response
Fluent::jsonSerialize() — Method in class Fluent
JsClass in namespace Illuminate\Support
$ Js#jsProperty in class Js

The JavaScript string.

Js::jsonEncode() — Method in class Js

Encode the given data as JSON.

LazyCollection::join() — Method in class LazyCollection

Join all items from the collection using a string. The final items can use a separate glue string.

MessageBag::jsonSerialize() — Method in class MessageBag

Convert the object into something JSON serializable.

Stringable::jsonSerialize() — Method in class Stringable

Convert the object to a string when JSON encoded.

$ BusFake#jobsToFakeProperty in class BusFake

The job types that should be intercepted instead of dispatched.

$ BusFake#jobsToDispatchProperty in class BusFake

The job types that should be dispatched instead of faked.

$ QueueFake#jobsToFakeProperty in class QueueFake

The job types that should be intercepted instead of pushed to the queue.

$ QueueFake#jobsToBeQueuedProperty in class QueueFake

The job types that should be pushed to the queue and not intercepted.

$ QueueFake#jobsProperty in class QueueFake

All of the jobs that have been pushed.

EnumeratesValues::jsonSerialize() — Method in class EnumeratesValues
$ AssertableJsonString#jsonProperty in class AssertableJsonString

The original encoded json.

AssertableJsonString::json() — Method in class AssertableJsonString

Validate and return the decoded response JSON.

AssertableJsonString::jsonSearchStrings() — Method in class AssertableJsonString

Get the strings we need to search for when examining the JSON.

TestResponse::json() — Method in class TestResponse

Validate and return the decoded response JSON.

$ FileLoader#jsonPathsProperty in class FileLoader

All of the registered paths to JSON translation files.

FileLoader::jsonPaths() — Method in class FileLoader

Get an array of all the registered paths to JSON translation files.

K

$ DynamoDbStore#keyAttributeProperty in class DynamoDbStore

The name of the attribute that should hold the key.

$ CacheEvent#keyProperty in class CacheEvent

The key of the event.

KeyForgottenClass in namespace Illuminate\Cache\Events
KeyWrittenClass in namespace Illuminate\Cache\Events
$ Limit#keyProperty in class Limit

The rate limit signature key.

KernelClass in namespace Illuminate\Contracts\Console
KernelClass in namespace Illuminate\Contracts\Http
MessageBag::keys() — Method in class MessageBag

Get the keys present in the message bag.

Collection::keys() — Method in class Collection

Get the keys of the collection items.

$ Model#keyTypeProperty in class Model

The "type" of the primary key ID.

$ Encrypter#keyProperty in class Encrypter

The encryption key.

EncryptionServiceProvider::key() — Method in class EncryptionServiceProvider

Extract the encryption key from the given configuration.

$ CacheBasedMaintenanceMode#keyProperty in class CacheBasedMaintenanceMode

The cache key to use when storing maintenance mode information.

KernelClass in namespace Illuminate\Foundation\Console
KeyGenerateCommandClass in namespace Illuminate\Foundation\Console
KeyGenerateCommand::keyReplacementPattern() — Method in class KeyGenerateCommand

Get a regex pattern that will match env APP_KEY with any random key.

KernelClass in namespace Illuminate\Foundation\Http
InteractsWithInput::keys() — Method in class InteractsWithInput

Get the keys for all of the input and files.

$ DatabaseNotification#keyTypeProperty in class DatabaseNotification

The "type" of the primary key ID.

$ ThrottlesExceptions#keyProperty in class ThrottlesExceptions

The developer specified key that the rate limiter should use.

$ WithoutOverlapping#keyProperty in class WithoutOverlapping

The job's unique key used for preventing overlaps.

Worker::kill() — Method in class Worker

Kill the process.

$ UrlGenerator#keyResolverProperty in class UrlGenerator

The encryption key resolver callable.

Store::keep() — Method in class Store

Reflash a subset of the current flash data.

Arr::keyBy() — Method in class Arr

Key an associative array by a field or using a callback.

Collection::keyBy() — Method in class Collection
Collection::keys() — Method in class Collection
Enumerable::keyBy() — Method in class Enumerable
Enumerable::keys() — Method in class Enumerable
Request::keys() — Method in class Request
Session::keep() — Method in class Session
LazyCollection::keyBy() — Method in class LazyCollection
LazyCollection::keys() — Method in class LazyCollection
MessageBag::keys() — Method in class MessageBag

Get the keys present in the message bag.

Str::kebab() — Method in class Str

Convert a string to kebab case.

Stringable::kebab() — Method in class Stringable

Convert a string to kebab case.

$ EnumeratesValues#keyByProperty in class EnumeratesValues

L

LockoutClass in namespace Illuminate\Auth\Events
LoginClass in namespace Illuminate\Auth\Events
LogoutClass in namespace Illuminate\Auth\Events
$ SessionGuard#lastAttemptedProperty in class SessionGuard

The user we last attempted to retrieve.

$ SessionGuard#loggedOutProperty in class SessionGuard

Indicates if the logout method has been called.

SessionGuard::loginUsingId() — Method in class SessionGuard

Log the given user ID into the application.

SessionGuard::login() — Method in class SessionGuard

Log a user into the application.

SessionGuard::logout() — Method in class SessionGuard

Log the user out of the application.

SessionGuard::logoutCurrentDevice() — Method in class SessionGuard

Log the user out of the application on their current device only.

SessionGuard::logoutOtherDevices() — Method in class SessionGuard

Invalidate other sessions for the current user.

LogBroadcasterClass in namespace Illuminate\Broadcasting\Broadcasters
$ LogBroadcaster#loggerProperty in class LogBroadcaster

The logger implementation.

$ ArrayStore#locksProperty in class ArrayStore

The array of locks.

ArrayStore::lock() — Method in class ArrayStore

Get a lock instance.

$ DatabaseLock#lotteryProperty in class DatabaseLock

The prune probability odds.

$ DatabaseStore#lockConnectionProperty in class DatabaseStore

The database connection instance that should be used to manage locks.

$ DatabaseStore#lockTableProperty in class DatabaseStore

The name of the cache locks table.

$ DatabaseStore#lockLotteryProperty in class DatabaseStore

An array representation of the lock lottery odds.

DatabaseStore::lock() — Method in class DatabaseStore

Get a lock instance.

DynamoDbStore::lock() — Method in class DynamoDbStore

Get a lock instance.

FileStore::lock() — Method in class FileStore

Get a lock instance.

HasCacheLock::lock() — Method in class HasCacheLock

Get a lock instance.

LockClass in namespace Illuminate\Cache
LuaScriptsClass in namespace Illuminate\Cache
MemcachedStore::lock() — Method in class MemcachedStore

Get a lock instance.

NullStore::lock() — Method in class NullStore

Get a lock instance.

$ RateLimiter#limitersProperty in class RateLimiter

The configured limit object resolvers.

RateLimiter::limiter() — Method in class RateLimiter

Get the given named rate limiter.

LimitClass in namespace Illuminate\Cache\RateLimiting
$ RedisStore#lockConnectionProperty in class RedisStore

The name of the connection that should be used for locks.

RedisStore::lock() — Method in class RedisStore

Get a lock instance.

RedisStore::lockConnection() — Method in class RedisStore

Get the Redis connection instance that should be used to manage locks.

$ Application#laravelProperty in class Application

The Laravel application instance.

$ Application#lastOutputProperty in class Application

The output from the previous command.

$ Command#laravelProperty in class Command

The Laravel application instance.

InteractsWithIO::line() — Method in class InteractsWithIO

Write a string as standard output.

ManagesFrequencies::lastDayOfMonth() — Method in class ManagesFrequencies

Schedule the event to run on the last day of the month.

Factory::line() — Method in class Factory
LineClass in namespace Illuminate\Console\View\Components
StatefulGuard::login() — Method in class StatefulGuard

Log a user into the application.

StatefulGuard::loginUsingId() — Method in class StatefulGuard

Log the given user ID into the application.

StatefulGuard::logout() — Method in class StatefulGuard

Log the user out of the application.

LockClass in namespace Illuminate\Contracts\Cache
LockProviderClass in namespace Illuminate\Contracts\Cache
LockProvider::lock() — Method in class LockProvider

Get a lock instance.

LockTimeoutExceptionClass in namespace Illuminate\Contracts\Cache
Dispatcher::listen() — Method in class Dispatcher

Register an event listener with the dispatcher.

Filesystem::lastModified() — Method in class Filesystem

Get the file's last modification time.

LockTimeoutExceptionClass in namespace Illuminate\Contracts\Filesystem
Application::langPath() — Method in class Application

Get the path to the language files.

Application::loadDeferredProviders() — Method in class Application

Load and boot all of the remaining deferred providers.

MailQueue::later() — Method in class MailQueue

Queue a new e-mail message for sending after (n) seconds.

Mailable::later() — Method in class Mailable

Deliver the queued message after (n) seconds.

Mailable::locale() — Method in class Mailable

Set the locale of the message.

LengthAwarePaginatorClass in namespace Illuminate\Contracts\Pagination
LengthAwarePaginator::lastPage() — Method in class LengthAwarePaginator

Get the page number of the last available page.

Paginator::lastItem() — Method in class Paginator

Get the "index" of the last item being paginated.

InvokedProcess::latestOutput() — Method in class InvokedProcess

Get the latest standard output for the process.

InvokedProcess::latestErrorOutput() — Method in class InvokedProcess

Get the latest error output for the process.

Monitor::looping() — Method in class Monitor

Register a callback to be executed on every iteration through the queue loop.

Queue::later() — Method in class Queue

Push a new job onto the queue after (n) seconds.

Queue::laterOn() — Method in class Queue

Push a new job onto a specific queue after (n) seconds.

LimiterTimeoutExceptionClass in namespace Illuminate\Contracts\Redis
LoaderClass in namespace Illuminate\Contracts\Translation
Loader::load() — Method in class Loader

Load the messages for the given locale.

BuildsQueries::lazy() — Method in class BuildsQueries

Query lazily, by chunks of the given size.

BuildsQueries::lazyById() — Method in class BuildsQueries

Query lazily, by chunking the results of a query by comparing IDs.

BuildsQueries::lazyByIdDesc() — Method in class BuildsQueries

Query lazily, by chunking the results of a query by comparing IDs in descending order.

$ Connection#loggingQueriesProperty in class Connection

Indicates whether queries are being logged.

Connection::logQuery() — Method in class Connection

Log a query in the connection's query log.

Connection::listen() — Method in class Connection

Register a database query listener with the connection.

Connection::logging() — Method in class Connection

Determine whether we're logging queries.

MigrateCommand::loadSchemaState() — Method in class MigrateCommand

Load the schema state to seed the initial database schema structure.

$ DatabaseTransactionRecord#levelProperty in class DatabaseTransactionRecord

The transaction level.

$ Builder#localMacrosProperty in class Builder

All of the locally registered builder macros.

Builder::latest() — Method in class Builder

Add an "order by" clause for a timestamp to the query.

Collection::load() — Method in class Collection

Load a set of relationships onto the collection.

Collection::loadAggregate() — Method in class Collection

Load a set of aggregations over relationship's column onto the collection.

Collection::loadCount() — Method in class Collection

Load a set of relationship counts onto the collection.

Collection::loadMax() — Method in class Collection

Load a set of relationship's max column values onto the collection.

Collection::loadMin() — Method in class Collection

Load a set of relationship's min column values onto the collection.

Collection::loadSum() — Method in class Collection

Load a set of relationship's column summations onto the collection.

Collection::loadAvg() — Method in class Collection

Load a set of relationship's average column values onto the collection.

Collection::loadExists() — Method in class Collection

Load a set of related existences onto the collection.

Collection::loadMissing() — Method in class Collection

Load a set of relationships onto the collection if they are not already eager loaded.

Collection::loadMissingRelation() — Method in class Collection

Load a relationship path if it is not already eager loaded.

Collection::loadMorph() — Method in class Collection

Load a set of relationships onto the mixed relationship collection.

Collection::loadMorphCount() — Method in class Collection

Load a set of relationship counts onto the mixed relationship collection.

Factory::lazy() — Method in class Factory
$ Model#lazyLoadingViolationCallbackProperty in class Model

The callback that is responsible for handling lazy loading violations.

Model::load() — Method in class Model

Eager load relations on the model.

Model::loadMorph() — Method in class Model

Eager load relationships on the polymorphic relation of a model.

Model::loadMissing() — Method in class Model

Eager load relations on the model if they are not already eager loaded.

Model::loadAggregate() — Method in class Model

Eager load relation's column aggregations on the model.

Model::loadCount() — Method in class Model

Eager load relation counts on the model.

Model::loadMax() — Method in class Model

Eager load relation max column values on the model.

Model::loadMin() — Method in class Model

Eager load relation min column values on the model.

Model::loadSum() — Method in class Model

Eager load relation's column summations on the model.

Model::loadAvg() — Method in class Model

Eager load relation average column values on the model.

Model::loadExists() — Method in class Model

Eager load related model existence values on the model.

Model::loadMorphAggregate() — Method in class Model

Eager load relationship column aggregation on the polymorphic relation of a model.

Model::loadMorphCount() — Method in class Model

Eager load relationship counts on the polymorphic relation of a model.

Model::loadMorphMax() — Method in class Model

Eager load relationship max column values on the polymorphic relation of a model.

Model::loadMorphMin() — Method in class Model

Eager load relationship min column values on the polymorphic relation of a model.

Model::loadMorphSum() — Method in class Model

Eager load relationship column summations on the polymorphic relation of a model.

Model::loadMorphAvg() — Method in class Model

Eager load relationship average column values on the polymorphic relation of a model.

$ PendingHasThroughRelationship#localRelationshipProperty in class PendingHasThroughRelationship

The local relationship.

BelongsToMany::lazy() — Method in class BelongsToMany

Query lazily, by chunks of the given size.

BelongsToMany::lazyById() — Method in class BelongsToMany

Query lazily, by chunking the results of a query by comparing IDs.

CanBeOneOfMany::latestOfMany() — Method in class CanBeOneOfMany

Indicate that the relation is the latest single result of a larger one-to-many relationship.

$ HasManyThrough#localKeyProperty in class HasManyThrough

The local key on the relationship.

HasManyThrough::lazy() — Method in class HasManyThrough

Query lazily, by chunks of the given size.

HasManyThrough::lazyById() — Method in class HasManyThrough

Query lazily, by chunking the results of a query by comparing IDs.

$ HasOneOrMany#localKeyProperty in class HasOneOrMany

The local key of the parent model.

LazyLoadingViolationExceptionClass in namespace Illuminate\Database
LostConnectionExceptionClass in namespace Illuminate\Database
DatabaseMigrationRepository::log() — Method in class DatabaseMigrationRepository

Log that a migration was run.

MigrationRepositoryInterface::log() — Method in class MigrationRepositoryInterface

Log that a migration was run.

Connection::lastInsertId() — Method in class Connection

Get the last insert ID.

SqlServerConnection::lastInsertId() — Method in class SqlServerConnection

Get the last insert ID.

$ Builder#limitProperty in class Builder

The maximum number of records to return.

$ Builder#lockProperty in class Builder

Indicates whether row locking is being used.

Builder::leftJoin() — Method in class Builder

Add a left join to the query.

Builder::leftJoinWhere() — Method in class Builder

Add a "join where" clause to the query.

Builder::leftJoinSub() — Method in class Builder

Add a subquery left join to the query.

Builder::latest() — Method in class Builder

Add an "order by" clause for a timestamp to the query.

Builder::limit() — Method in class Builder

Set the "limit" value of the query.

Builder::lock() — Method in class Builder

Lock the selected rows in the table.

Builder::lockForUpdate() — Method in class Builder

Lock the selected rows in the table for updating.

Blueprint::longText() — Method in class Blueprint

Create a new long text column on the table.

Blueprint::lineString() — Method in class Blueprint

Create a new linestring column on the table.

IndexDefinition::language() — Method in class IndexDefinition
MySqlSchemaState::load() — Method in class MySqlSchemaState

Load the given schema file into the database.

PostgresSchemaState::load() — Method in class PostgresSchemaState

Load the given schema file into the database.

SchemaState::load() — Method in class SchemaState

Load the given schema file into the database.

SqliteSchemaState::load() — Method in class SqliteSchemaState

Load the given schema file into the database.

$ Dispatcher#listenersProperty in class Dispatcher

The registered event listeners.

Dispatcher::listen() — Method in class Dispatcher

Register an event listener with the dispatcher.

NullDispatcher::listen() — Method in class NullDispatcher

Register an event listener with the dispatcher.

Filesystem::lines() — Method in class Filesystem

Get the contents of a file one line at a time.

Filesystem::link() — Method in class Filesystem

Create a symlink to the target file or directory. On Windows, a hard link is created if the target is a file.

Filesystem::lastModified() — Method in class Filesystem

Get the file's last modification time.

FilesystemAdapter::lastModified() — Method in class FilesystemAdapter

Get the file's last modification time.

LockableFileClass in namespace Illuminate\Filesystem
AliasLoader::load() — Method in class AliasLoader

Load a class alias if it is registered.

AliasLoader::loadFacade() — Method in class AliasLoader

Load a real-time facade for the given alias.

$ Application#loadedProvidersProperty in class Application

The names of the loaded service providers.

$ Application#langPathProperty in class Application

The custom language file path defined by the developer.

Application::langPath() — Method in class Application

Get the path to the language files.

Application::loadEnvironmentFrom() — Method in class Application

Set the environment file to be loaded during bootstrapping.

Application::loadDeferredProviders() — Method in class Application

Load and boot all of the remaining deferred providers.

Application::loadDeferredProvider() — Method in class Application

Load the provider for a deferred service.

Application::loadDeferredProviderIfNeeded() — Method in class Application

Load the deferred provider if the given type is a deferred service and the instance has not been loaded.

LoadConfigurationClass in namespace Illuminate\Foundation\Bootstrap
LoadConfiguration::loadConfigurationFiles() — Method in class LoadConfiguration

Load the configuration items from all of the files.

LoadEnvironmentVariablesClass in namespace Illuminate\Foundation\Bootstrap
Kernel::load() — Method in class Kernel

Register all of the commands in the given directory.

LangPublishCommandClass in namespace Illuminate\Foundation\Console
ListenerMakeCommandClass in namespace Illuminate\Foundation\Console
StorageLinkCommand::links() — Method in class StorageLinkCommand

Get the symbolic links that are configured for the application.

LocaleUpdatedClass in namespace Illuminate\Foundation\Events
$ LocaleUpdated#localeProperty in class LocaleUpdated

The new locale.

$ Handler#levelsProperty in class Handler

A map of exceptions with their corresponding custom log levels.

Handler::level() — Method in class Handler

Set the log level for the given exception type.

ProviderRepository::load() — Method in class ProviderRepository

Register the application service providers.

ProviderRepository::loadManifest() — Method in class ProviderRepository

Load the service provider manifest JSON file.

$ EventServiceProvider#listenProperty in class EventServiceProvider

The event handler mappings for the application.

EventServiceProvider::listens() — Method in class EventServiceProvider

Get the events and handlers.

$ RouteServiceProvider#loadRoutesUsingProperty in class RouteServiceProvider

The callback that should be used to load the application's routes.

RouteServiceProvider::loadCachedRoutes() — Method in class RouteServiceProvider

Load the cached routes for the application.

RouteServiceProvider::loadRoutes() — Method in class RouteServiceProvider

Load the application routes.

$ MakesHttpRequests#latestResponseProperty in class MakesHttpRequests

The latest test response (if any).

LazilyRefreshDatabaseClass in namespace Illuminate\Foundation\Testing
$ RefreshDatabaseState#lazilyRefreshedProperty in class RefreshDatabaseState

Indicates if a lazy refresh hook has been invoked.

$ MessageLogged#levelProperty in class MessageLogged

The log "level".

LogManagerClass in namespace Illuminate\Log
LogManager::log() — Method in class LogManager

Logs with an arbitrary level.

LogServiceProviderClass in namespace Illuminate\Log
LoggerClass in namespace Illuminate\Log
$ Logger#loggerProperty in class Logger

The underlying logger implementation.

Logger::log() — Method in class Logger

Log a message to the logs.

Logger::listen() — Method in class Logger

Register a new callback handler for when a log event is triggered.

$ ParsesLogConfiguration#levelsProperty in class ParsesLogConfiguration

The Log levels.

ParsesLogConfiguration::level() — Method in class ParsesLogConfiguration

Parse the string level into a Monolog constant.

$ Mailable#localeProperty in class Mailable

The locale of the message.

Mailable::later() — Method in class Mailable

Deliver the queued message after (n) seconds.

Mailable::locale() — Method in class Mailable

Set the locale of the message.

Mailer::later() — Method in class Mailer

Queue a new e-mail message for sending after (n) seconds.

Mailer::laterOn() — Method in class Mailer

Queue a new e-mail message for sending after (n) seconds on the given queue.

Markdown::loadComponentsFrom() — Method in class Markdown

Register new mail component paths.

$ PendingMail#localeProperty in class PendingMail

The locale of the message.

PendingMail::locale() — Method in class PendingMail

Set the locale of the message.

PendingMail::later() — Method in class PendingMail

Deliver the queued message after (n) seconds.

LogTransportClass in namespace Illuminate\Mail\Transport
$ LogTransport#loggerProperty in class LogTransport

The Logger instance.

LogTransport::logger() — Method in class LogTransport

Get the logger for the LogTransport instance.

$ ChannelManager#localeProperty in class ChannelManager

The locale used when sending notifications.

ChannelManager::locale() — Method in class ChannelManager

Set the locale of notifications.

$ SimpleMessage#levelProperty in class SimpleMessage

The "level" of the notification (info, success, error).

SimpleMessage::level() — Method in class SimpleMessage

Set the "level" of the notification (success, error, etc.).

SimpleMessage::line() — Method in class SimpleMessage

Add a line of text to the notification.

SimpleMessage::lineIf() — Method in class SimpleMessage

Add a line of text to the notification if the given condition is true.

SimpleMessage::lines() — Method in class SimpleMessage

Add lines of text to the notification.

SimpleMessage::linesIf() — Method in class SimpleMessage

Add lines of text to the notification if the given condition is true.

$ Notification#localeProperty in class Notification

The locale to be used when sending the notification.

Notification::locale() — Method in class Notification

Set the locale to send this notification in.

$ NotificationSender#localeProperty in class NotificationSender

The locale to be used when sending notifications.

AbstractCursorPaginator::loadMorph() — Method in class AbstractCursorPaginator

Load a set of relationships onto the mixed relationship collection.

AbstractCursorPaginator::loadMorphCount() — Method in class AbstractCursorPaginator

Load a set of relationship counts onto the mixed relationship collection.

AbstractPaginator::loadMorph() — Method in class AbstractPaginator

Load a set of relationships onto the mixed relationship collection.

AbstractPaginator::loadMorphCount() — Method in class AbstractPaginator

Load a set of relationship counts onto the mixed relationship collection.

AbstractPaginator::lastItem() — Method in class AbstractPaginator

Get the number of the last item in the slice.

CursorPaginator::links() — Method in class CursorPaginator

Render the paginator using the given view.

LengthAwarePaginatorClass in namespace Illuminate\Pagination
$ LengthAwarePaginator#lastPageProperty in class LengthAwarePaginator

The last available page.

LengthAwarePaginator::links() — Method in class LengthAwarePaginator

Render the paginator using the given view.

LengthAwarePaginator::linkCollection() — Method in class LengthAwarePaginator

Get the paginator links as a collection (for JSON responses).

LengthAwarePaginator::lastPage() — Method in class LengthAwarePaginator

Get the last page.

Paginator::links() — Method in class Paginator

Render the paginator using the given view.

UrlWindow::lastPage() — Method in class UrlWindow

Get the last page from the paginator.

FakeInvokedProcess::latestOutput() — Method in class FakeInvokedProcess

Get the latest standard output for the process.

FakeInvokedProcess::latestErrorOutput() — Method in class FakeInvokedProcess

Get the latest error output for the process.

InvokedProcess::latestOutput() — Method in class InvokedProcess

Get the latest standard output for the process.

InvokedProcess::latestErrorOutput() — Method in class InvokedProcess

Get the latest error output for the process.

BeanstalkdQueue::later() — Method in class BeanstalkdQueue

Push a new job onto the queue after (n) seconds.

Manager::later() — Method in class Manager

Push a new job onto the queue after (n) seconds.

ListFailedCommandClass in namespace Illuminate\Queue\Console
ListenCommandClass in namespace Illuminate\Queue\Console
$ ListenCommand#listenerProperty in class ListenCommand

The queue listener instance.

$ WorkCommand#latestStartedAtProperty in class WorkCommand

Holds the start time of the last processed job, if any.

WorkCommand::listenForEvents() — Method in class WorkCommand

Listen for the queue events in order to update the console output.

WorkCommand::logFailedJob() — Method in class WorkCommand

Store a failed job event.

DatabaseQueue::later() — Method in class DatabaseQueue

Push a new job onto the queue after (n) seconds.

LoopingClass in namespace Illuminate\Queue\Events
DatabaseFailedJobProvider::log() — Method in class DatabaseFailedJobProvider

Log a failed job into storage.

DatabaseUuidFailedJobProvider::log() — Method in class DatabaseUuidFailedJobProvider

Log a failed job into storage.

DynamoDbFailedJobProvider::log() — Method in class DynamoDbFailedJobProvider

Log a failed job into storage.

FailedJobProviderInterface::log() — Method in class FailedJobProviderInterface

Log a failed job into storage.

NullFailedJobProvider::log() — Method in class NullFailedJobProvider

Log a failed job into storage.

ListenerClass in namespace Illuminate\Queue
Listener::listen() — Method in class Listener

Listen to the given queue connection.

ListenerOptionsClass in namespace Illuminate\Queue
LuaScriptsClass in namespace Illuminate\Queue
$ RateLimited#limiterProperty in class RateLimited

The rate limiter instance.

$ RateLimited#limiterNameProperty in class RateLimited

The name of the rate limiter.

$ ThrottlesExceptions#limiterProperty in class ThrottlesExceptions

The rate limiter instance.

$ ThrottlesExceptionsWithRedis#limiterProperty in class ThrottlesExceptionsWithRedis

The rate limiter instance.

NullQueue::later() — Method in class NullQueue

Push a new job onto the queue after (n) seconds.

Queue::laterOn() — Method in class Queue

Push a new job onto a specific queue after (n) seconds.

QueueManager::looping() — Method in class QueueManager

Register an event listener for the daemon queue loop.

RedisQueue::later() — Method in class RedisQueue

Push a new job onto the queue after a delay.

RedisQueue::laterRaw() — Method in class RedisQueue

Push a raw job onto the queue after (n) seconds.

SqsQueue::later() — Method in class SqsQueue

Push a new job onto the queue after (n) seconds.

SyncQueue::later() — Method in class SyncQueue

Push a new job onto the queue after (n) seconds.

Worker::listenForSignals() — Method in class Worker

Enable async signals for the process.

Connection::listen() — Method in class Connection

Register a Redis command listener with the connection.

PacksPhpRedisValues::lzfCompressed() — Method in class PacksPhpRedisValues

Determine if LZF compression is enabled.

PacksPhpRedisValues::lz4Compressed() — Method in class PacksPhpRedisValues

Determine if LZ4 compression is enabled.

PhpRedisConnection::lrem() — Method in class PhpRedisConnection

Removes the first count occurrences of the value element from the list.

ConcurrencyLimiter::lockScript() — Method in class ConcurrencyLimiter

Get the Lua script for acquiring a lock.

ConcurrencyLimiterBuilder::limit() — Method in class ConcurrencyLimiterBuilder

Set the maximum number of locks that can be obtained per time window.

DurationLimiter::luaScript() — Method in class DurationLimiter

Get the Lua script for acquiring a lock.

$ ThrottleRequests#limiterProperty in class ThrottleRequests

The rate limiter instance.

$ Route#lockSecondsProperty in class Route

Indicates the maximum number of seconds the route should acquire a session lock for.

Route::locksFor() — Method in class Route

Get the maximum number of seconds the route's session lock should be held for.

Router::loadRoutes() — Method in class Router

Load the provided routes.

AuthenticateSession::logout() — Method in class AuthenticateSession

Log the user out of the application.

Store::loadSession() — Method in class Store

Load the session data from the handler.

Arr::last() — Method in class Arr

Return the last element in an array passing a given truth test.

Collection::lazy() — Method in class Collection

Get a lazy collection for the items in this collection.

Collection::last() — Method in class Collection
DateFactory::localeHasDiffOneDayWords() — Method in class DateFactory
DateFactory::localeHasDiffSyntax() — Method in class DateFactory
DateFactory::localeHasDiffTwoDayWords() — Method in class DateFactory
DateFactory::localeHasPeriodSyntax() — Method in class DateFactory
DateFactory::localeHasShortUnits() — Method in class DateFactory
Enumerable::last() — Method in class Enumerable
App::langPath() — Method in class App
App::loadEnvironmentFrom() — Method in class App
App::loadDeferredProviders() — Method in class App
App::loadDeferredProvider() — Method in class App
Auth::login() — Method in class Auth
Auth::loginUsingId() — Method in class Auth
Auth::logout() — Method in class Auth
Auth::logoutCurrentDevice() — Method in class Auth
Auth::logoutOtherDevices() — Method in class Auth
Cache::lock() — Method in class Cache
DB::logQuery() — Method in class DB
DB::listen() — Method in class DB
DB::logging() — Method in class DB
Date::localeHasDiffOneDayWords() — Method in class Date
Date::localeHasDiffSyntax() — Method in class Date
Date::localeHasDiffTwoDayWords() — Method in class Date
Date::localeHasPeriodSyntax() — Method in class Date
Date::localeHasShortUnits() — Method in class Date
Event::listen() — Method in class Event
File::lines() — Method in class File
File::link() — Method in class File
File::lastModified() — Method in class File
LangClass in namespace Illuminate\Support\Facades
Lang::load() — Method in class Lang
Lang::locale() — Method in class Lang
LogClass in namespace Illuminate\Support\Facades
Log::log() — Method in class Log
Log::listen() — Method in class Log
Mail::later() — Method in class Mail
Mail::laterOn() — Method in class Mail
Notification::locale() — Method in class Notification
Queue::looping() — Method in class Queue
Queue::later() — Method in class Queue
Queue::laterOn() — Method in class Queue
RateLimiter::limiter() — Method in class RateLimiter
Redis::listen() — Method in class Redis
Storage::lastModified() — Method in class Storage
Storage::listContents() — Method in class Storage
LazyCollectionClass in namespace Illuminate\Support
LazyCollection::last() — Method in class LazyCollection
LotteryClass in namespace Illuminate\Support
$ Lottery#loserProperty in class Lottery

The losing callback.

Lottery::loser() — Method in class Lottery

Set the loser callback.

$ Pluralizer#languageProperty in class Pluralizer

The language that should be used by the inflector.

ServiceProvider::loadRoutesFrom() — Method in class ServiceProvider

Load the given routes file if routes are not already cached.

ServiceProvider::loadViewsFrom() — Method in class ServiceProvider

Register a view file namespace.

ServiceProvider::loadViewComponentsAs() — Method in class ServiceProvider

Register the given view components with a custom prefix.

ServiceProvider::loadTranslationsFrom() — Method in class ServiceProvider

Register a translation file namespace.

ServiceProvider::loadJsonTranslationsFrom() — Method in class ServiceProvider

Register a JSON translation file path.

ServiceProvider::loadMigrationsFrom() — Method in class ServiceProvider

Register database migration paths.

ServiceProvider::loadFactoriesFrom() — Method in class ServiceProvider

Register Eloquent model factory paths.

Str::length() — Method in class Str

Return the length of the given string.

Str::limit() — Method in class Str

Limit the number of characters in a string.

Str::lower() — Method in class Str

Convert the given string to lower-case.

Str::lcfirst() — Method in class Str

Make a string's first character lowercase.

Stringable::length() — Method in class Stringable

Return the length of the given string.

Stringable::limit() — Method in class Stringable

Limit the number of characters in a string.

Stringable::lower() — Method in class Stringable

Convert the given string to lower-case.

Stringable::ltrim() — Method in class Stringable

Left trim the string of the given characters.

Stringable::lcfirst() — Method in class Stringable

Make a string's first character lowercase.

EventFake::listen() — Method in class EventFake

Register an event listener with the dispatcher.

MailFake::later() — Method in class MailFake

Queue a new e-mail message for sending after (n) seconds.

$ NotificationFake#localeProperty in class NotificationFake

Locale used when sending notifications.

NotificationFake::locale() — Method in class NotificationFake

Set the locale of notifications.

QueueFake::later() — Method in class QueueFake

Push a new job onto the queue after (n) seconds.

QueueFake::laterOn() — Method in class QueueFake

Push a new job onto a specific queue after (n) seconds.

LocalizableClass in namespace Illuminate\Support\Traits
LoggedExceptionCollectionClass in namespace Illuminate\Testing
ArrayLoader::load() — Method in class ArrayLoader

Load the messages for the given locale.

FileLoader::load() — Method in class FileLoader

Load the messages for the given locale.

FileLoader::loadNamespaced() — Method in class FileLoader

Load a namespaced translation group.

FileLoader::loadNamespaceOverrides() — Method in class FileLoader

Load a local namespaced translation group for overrides.

FileLoader::loadPaths() — Method in class FileLoader

Load a locale from a given path.

FileLoader::loadJsonPaths() — Method in class FileLoader

Load a locale from the given JSON file path.

$ Translator#loaderProperty in class Translator

The loader implementation.

$ Translator#localeProperty in class Translator

The default locale being used by the translator.

$ Translator#loadedProperty in class Translator

The array of loaded translation groups.

Translator::localeForChoice() — Method in class Translator

Get the proper locale for a choice operation.

Translator::load() — Method in class Translator

Load the specified language group.

Translator::localeArray() — Method in class Translator

Get the array of locales to be checked.

Translator::locale() — Method in class Translator

Get the default locale being used.

$ Password#lettersProperty in class Password

If the password requires at least one letter.

Password::letters() — Method in class Password

Makes the password require at least one letter.

$ CompilesFragments#lastFragmentProperty in class CompilesFragments

The last compiled fragment.

$ CompilesLayouts#lastSectionProperty in class CompilesLayouts

The name of the last section that was started.

$ ManagesLoops#loopsStackProperty in class ManagesLoops

The stack of in-progress loops.

$ CompilerEngine#lastCompiledProperty in class CompilerEngine

A stack of the last compiled templates.

$ Engine#lastRenderedProperty in class Engine

The view that was last to be rendered.

M

Gate::methodAllowsGuests() — Method in class Gate

Determine if the given class method allows guests.

$ Response#messageProperty in class Response

The response message.

Response::message() — Method in class Response

Get the response message.

$ EloquentUserProvider#modelProperty in class EloquentUserProvider

The Eloquent user model.

MustVerifyEmailClass in namespace Illuminate\Auth
MustVerifyEmail::markEmailAsVerified() — Method in class MustVerifyEmail

Mark the given user's email as verified.

BroadcastManager::mustBeUniqueAndCannotAcquireLock() — Method in class BroadcastManager

Determine if the broadcastable event must be unique and determine if we can acquire the necessary lock.

BatchFactory::make() — Method in class BatchFactory

Create a new batch instance.

BatchRepository::markAsFinished() — Method in class BatchRepository

Mark the batch that has the given ID as finished.

DatabaseBatchRepository::markAsFinished() — Method in class DatabaseBatchRepository

Mark the batch that has the given ID as finished.

Dispatcher::map() — Method in class Dispatcher

Map a command to a handler.

$ Queueable#middlewareProperty in class Queueable

The middleware the job should be dispatched through.

DynamoDbStore::many() — Method in class DynamoDbStore

Retrieve multiple items from the cache by key.

MemcachedConnectorClass in namespace Illuminate\Cache
MemcachedLockClass in namespace Illuminate\Cache
$ MemcachedLock#memcachedProperty in class MemcachedLock

The Memcached instance.

MemcachedStoreClass in namespace Illuminate\Cache
$ MemcachedStore#memcachedProperty in class MemcachedStore

The Memcached instance.

MemcachedStore::many() — Method in class MemcachedStore

Retrieve multiple items from the cache by key.

$ Limit#maxAttemptsProperty in class Limit

The maximum number of attempts allowed within the given number of minutes.

RedisStore::many() — Method in class RedisStore

Retrieve multiple items from the cache by key.

Repository::missing() — Method in class Repository

Determine if an item doesn't exist in the cache.

Repository::many() — Method in class Repository

Retrieve multiple items from the cache by key.

RetrievesMultipleKeys::many() — Method in class RetrievesMultipleKeys

Retrieve multiple items from the cache by key.

GeneratorCommand::makeDirectory() — Method in class GeneratorCommand

Build the directory for the class if necessary.

CallbackEvent::mutexName() — Method in class CallbackEvent

Get the mutex name for the scheduled command.

$ Event#mutexProperty in class Event

The event mutex implementation.

$ Event#mutexNameResolverProperty in class Event

The mutex name resolver callback.

Event::mutexName() — Method in class Event

Get the mutex name for the scheduled command.

ManagesFrequenciesClass in namespace Illuminate\Console\Scheduling
ManagesFrequencies::mondays() — Method in class ManagesFrequencies

Schedule the event to run only on Mondays.

ManagesFrequencies::monthly() — Method in class ManagesFrequencies

Schedule the event to run monthly.

ManagesFrequencies::monthlyOn() — Method in class ManagesFrequencies

Schedule the event to run monthly on a given day and time.

$ Component#mutatorsProperty in class Component

The list of mutators to apply on the view data.

Component::mutate() — Method in class Component

Mutates the given data with the given set of mutators.

$ Container#methodBindingsProperty in class Container

The container's method bindings.

Container::makeWith() — Method in class Container

An alias function name for make().

Container::make() — Method in class Container

Resolve the given type from the container.

MustVerifyEmailClass in namespace Illuminate\Contracts\Auth
MustVerifyEmail::markEmailAsVerified() — Method in class MustVerifyEmail

Mark the given user's email as verified.

Dispatcher::map() — Method in class Dispatcher

Map a command to a handler.

Store::many() — Method in class Store

Retrieve multiple items from the cache by key.

Container::make() — Method in class Container

Resolve the given type from the container.

Factory::make() — Method in class Factory

Create a new cookie instance.

MigrationEventClass in namespace Illuminate\Contracts\Database\Events
ModelIdentifierClass in namespace Illuminate\Contracts\Database
Filesystem::move() — Method in class Filesystem

Move a file to a new location.

Filesystem::makeDirectory() — Method in class Filesystem

Create a directory.

Application::maintenanceMode() — Method in class Application

Get an instance of the maintenance mode manager implementation.

MaintenanceModeClass in namespace Illuminate\Contracts\Foundation
Hasher::make() — Method in class Hasher

Hash the given value.

Factory::mailer() — Method in class Factory

Get a mailer instance by name.

MailQueueClass in namespace Illuminate\Contracts\Mail
MailableClass in namespace Illuminate\Contracts\Mail
Mailable::mailer() — Method in class Mailable

Set the name of the mailer that should be used to send the message.

MailerClass in namespace Illuminate\Contracts\Mail
Job::markAsFailed() — Method in class Job

Mark the job as "failed".

Job::maxTries() — Method in class Job

Get the number of times to attempt a job.

Job::maxExceptions() — Method in class Job

Get the maximum number of exceptions allowed, regardless of attempts.

MonitorClass in namespace Illuminate\Contracts\Queue
Registrar::match() — Method in class Registrar

Register a new route with the given verbs.

ResponseFactory::make() — Method in class ResponseFactory

Create a new response instance.

Session::migrate() — Method in class Session

Generate a new session ID for the session.

MessageBagClass in namespace Illuminate\Contracts\Support
MessageBag::merge() — Method in class MessageBag

Merge a new array of messages into the bag.

MessageProviderClass in namespace Illuminate\Contracts\Support
Factory::make() — Method in class Factory

Create a new Validator instance.

Rule::message() — Method in class Rule

Get the validation error message.

Factory::make() — Method in class Factory

Get the evaluated view contents for the given view.

CookieJar::make() — Method in class CookieJar

Create a new cookie instance.

ManagerClass in namespace Illuminate\Database\Capsule
$ Manager#managerProperty in class Manager

The database manager instance.

$ ClassMorphViolationException#modelProperty in class ClassMorphViolationException

The name of the affected Eloquent model.

ManagesTransactionsClass in namespace Illuminate\Database\Concerns
ConnectionFactory::make() — Method in class ConnectionFactory

Establish a PDO connection based on the configuration.

ConnectionFactory::mergeReadWriteConfig() — Method in class ConnectionFactory

Merge a configuration for a read / write connection.

MySqlConnectorClass in namespace Illuminate\Database\Connectors
MigrateCommandClass in namespace Illuminate\Database\Console\Migrations
$ MigrateCommand#migratorProperty in class MigrateCommand

The migrator instance.

MigrateMakeCommandClass in namespace Illuminate\Database\Console\Migrations
$ ResetCommand#migratorProperty in class ResetCommand

The migrator instance.

$ RollbackCommand#migratorProperty in class RollbackCommand

The migrator instance.

$ StatusCommand#migratorProperty in class StatusCommand

The migrator instance.

MonitorCommandClass in namespace Illuminate\Database\Console
PruneCommand::models() — Method in class PruneCommand

Determine the models that should be pruned.

DatabaseManager::makeConnection() — Method in class DatabaseManager

Make the database connection instance.

$ BroadcastableModelEventOccurred#modelProperty in class BroadcastableModelEventOccurred

The model instance corresponding to the event.

$ Builder#modelProperty in class Builder

The model being queried.

$ Builder#macrosProperty in class Builder

All of the globally registered builder macros.

Builder::make() — Method in class Builder

Create and return an un-saved model instance.

Attribute::make() — Method in class Attribute

Create a new attribute accessor / mutator.

Collection::modelKeys() — Method in class Collection

Get the array of primary keys.

Collection::merge() — Method in class Collection

Merge the collection with the given items.

Collection::map() — Method in class Collection
Collection::mapWithKeys() — Method in class Collection
Collection::makeHidden() — Method in class Collection

Make the given, typically visible, attributes hidden across the entire collection.

Collection::makeVisible() — Method in class Collection

Make the given, typically hidden, attributes visible across the entire collection.

GuardsAttributes::mergeFillable() — Method in class GuardsAttributes

Merge new fillable attributes with existing fillable attributes on the model.

GuardsAttributes::mergeGuarded() — Method in class GuardsAttributes

Merge new guarded attributes with existing guarded attributes on the model.

$ HasAttributes#mutatorCacheProperty in class HasAttributes

The cache of the mutated attributes for each class.

HasAttributes::mutateAttribute() — Method in class HasAttributes

Get the value of an attribute using its mutator.

HasAttributes::mutateAttributeMarkedAttribute() — Method in class HasAttributes

Get the value of an "Attribute" return type marked attribute using its mutator.

HasAttributes::mutateAttributeForArray() — Method in class HasAttributes

Get the value of an attribute using its mutator for array conversion.

HasAttributes::mergeCasts() — Method in class HasAttributes

Merge new casts with existing casts on the model.

HasAttributes::mergeAttributesFromCachedCasts() — Method in class HasAttributes

Merge the cast class and attribute cast attributes back into the model.

HasAttributes::mergeAttributesFromClassCasts() — Method in class HasAttributes

Merge the cast class attributes back into the model.

HasAttributes::mergeAttributesFromAttributeCasts() — Method in class HasAttributes

Merge the cast class attributes back into the model.

$ HasRelationships#manyMethodsProperty in class HasRelationships

The many to many relationship methods.

HasRelationships::morphOne() — Method in class HasRelationships

Define a polymorphic one-to-one relationship.

HasRelationships::morphTo() — Method in class HasRelationships

Define a polymorphic, inverse one-to-one or many relationship.

HasRelationships::morphEagerTo() — Method in class HasRelationships

Define a polymorphic, inverse one-to-one or many relationship.

HasRelationships::morphInstanceTo() — Method in class HasRelationships

Define a polymorphic, inverse one-to-one or many relationship.

HasRelationships::morphMany() — Method in class HasRelationships

Define a polymorphic one-to-many relationship.

HasRelationships::morphToMany() — Method in class HasRelationships

Define a polymorphic many-to-many relationship.

HasRelationships::morphedByMany() — Method in class HasRelationships

Define a polymorphic, inverse many-to-many relationship.

HidesAttributes::makeVisible() — Method in class HidesAttributes

Make the given, typically hidden, attributes visible.

HidesAttributes::makeVisibleIf() — Method in class HidesAttributes

Make the given, typically hidden, attributes visible if the given truth test passes.

HidesAttributes::makeHidden() — Method in class HidesAttributes

Make the given, typically visible, attributes hidden.

HidesAttributes::makeHiddenIf() — Method in class HidesAttributes

Make the given, typically visible, attributes hidden if the given truth test passes.

QueriesRelationships::mergeConstraintsFrom() — Method in class QueriesRelationships

Merge the where constraints from another query to the current query.

$ Factory#modelProperty in class Factory
$ Factory#modelNameResolverProperty in class Factory

The default model name resolver.

Factory::makeOne() — Method in class Factory

Make a single instance of the model.

Factory::make() — Method in class Factory

Create a collection of models.

Factory::makeInstance() — Method in class Factory

Make an instance of the model with the given attributes.

Factory::modelName() — Method in class Factory
$ HigherOrderBuilderProxy#methodProperty in class HigherOrderBuilderProxy

The method being proxied.

$ InvalidCastException#modelProperty in class InvalidCastException

The name of the affected Eloquent model.

MassAssignmentExceptionClass in namespace Illuminate\Database\Eloquent
MassPrunableClass in namespace Illuminate\Database\Eloquent
MissingAttributeExceptionClass in namespace Illuminate\Database\Eloquent
ModelClass in namespace Illuminate\Database\Eloquent
$ Model#modelsShouldPreventLazyLoadingProperty in class Model

Indicates whether lazy loading should be restricted on all models.

$ Model#modelsShouldPreventSilentlyDiscardingAttributesProperty in class Model

Indicates if an exception should be thrown instead of silently discarding non-fillable attributes.

$ Model#modelsShouldPreventAccessingMissingAttributesProperty in class Model

Indicates if an exception should be thrown when trying to access a missing attribute on a retrieved model.

$ Model#missingAttributeViolationCallbackProperty in class Model

The callback that is responsible for handling missing attribute violations.

ModelNotFoundExceptionClass in namespace Illuminate\Database\Eloquent
$ ModelNotFoundException#modelProperty in class ModelNotFoundException

Name of the affected Eloquent model.

$ RelationNotFoundException#modelProperty in class RelationNotFoundException

The name of the affected Eloquent model.

RelationNotFoundException::make() — Method in class RelationNotFoundException

Create a new exception instance.

BelongsTo::match() — Method in class BelongsTo

Match the eagerly loaded results to their parents.

BelongsToMany::match() — Method in class BelongsToMany

Match the eagerly loaded results to their parents.

BelongsToMany::migratePivotAttributes() — Method in class BelongsToMany

Get the pivot attributes from a model.

CanBeOneOfMany::mergeOneOfManyJoinsTo() — Method in class CanBeOneOfMany

Merge the relationship query joins to the given query builder.

HasMany::match() — Method in class HasMany

Match the eagerly loaded results to their parents.

HasManyThrough::match() — Method in class HasManyThrough

Match the eagerly loaded results to their parents.

HasOne::match() — Method in class HasOne

Match the eagerly loaded results to their parents.

HasOneOrMany::make() — Method in class HasOneOrMany

Create and return an un-saved instance of the related model.

HasOneOrMany::makeMany() — Method in class HasOneOrMany

Create and return an un-saved instance of the related models.

HasOneOrMany::matchOne() — Method in class HasOneOrMany

Match the eagerly loaded results to their single parents.

HasOneOrMany::matchMany() — Method in class HasOneOrMany

Match the eagerly loaded results to their many parents.

HasOneOrMany::matchOneOrMany() — Method in class HasOneOrMany

Match the eagerly loaded results to their many parents.

HasOneThrough::match() — Method in class HasOneThrough

Match the eagerly loaded results to their parents.

MorphManyClass in namespace Illuminate\Database\Eloquent\Relations
MorphMany::match() — Method in class MorphMany

Match the eagerly loaded results to their parents.

MorphOneClass in namespace Illuminate\Database\Eloquent\Relations
MorphOne::match() — Method in class MorphOne

Match the eagerly loaded results to their parents.

MorphOneOrManyClass in namespace Illuminate\Database\Eloquent\Relations
$ MorphOneOrMany#morphTypeProperty in class MorphOneOrMany

The foreign key type for the relationship.

$ MorphOneOrMany#morphClassProperty in class MorphOneOrMany

The class name of the parent model.

MorphPivotClass in namespace Illuminate\Database\Eloquent\Relations
$ MorphPivot#morphTypeProperty in class MorphPivot

The type of the polymorphic relation.

$ MorphPivot#morphClassProperty in class MorphPivot

The value of the polymorphic relation.

MorphToClass in namespace Illuminate\Database\Eloquent\Relations
$ MorphTo#morphTypeProperty in class MorphTo

The type of the polymorphic relation.

$ MorphTo#modelsProperty in class MorphTo

The models whose relations are being eager loaded.

$ MorphTo#macroBufferProperty in class MorphTo

A buffer of dynamic calls to query macros.

$ MorphTo#morphableEagerLoadsProperty in class MorphTo

A map of relations to load for each individual morph type.

$ MorphTo#morphableEagerLoadCountsProperty in class MorphTo

A map of relationship counts to load for each individual morph type.

$ MorphTo#morphableConstraintsProperty in class MorphTo

A map of constraints to apply for each individual morph type.

MorphTo::match() — Method in class MorphTo

Match the eagerly loaded results to their parents.

MorphTo::matchToMorphParents() — Method in class MorphTo

Match the results for a given type to their parents.

MorphTo::morphWith() — Method in class MorphTo

Specify which relations to load for a given morph type.

MorphTo::morphWithCount() — Method in class MorphTo

Specify which relationship counts to load for a given morph type.

MorphToManyClass in namespace Illuminate\Database\Eloquent\Relations
$ MorphToMany#morphTypeProperty in class MorphToMany

The type of the polymorphic relation.

$ MorphToMany#morphClassProperty in class MorphToMany

The class name of the morph type constraint.

$ Relation#morphMapProperty in class Relation

An array to map class names to their morph names in the database.

Relation::match() — Method in class Relation

Match the eagerly loaded results to their parents.

Relation::morphMap() — Method in class Relation

Set or get the morph map for polymorphic relations.

MigrationEndedClass in namespace Illuminate\Database\Events
MigrationEventClass in namespace Illuminate\Database\Events
$ MigrationEvent#migrationProperty in class MigrationEvent

A migration instance.

$ MigrationEvent#methodProperty in class MigrationEvent

The migration method that was called.

MigrationStartedClass in namespace Illuminate\Database\Events
MigrationsEndedClass in namespace Illuminate\Database\Events
MigrationsEventClass in namespace Illuminate\Database\Events
$ MigrationsEvent#methodProperty in class MigrationsEvent

The migration method that was invoked.

MigrationsStartedClass in namespace Illuminate\Database\Events
ModelsPrunedClass in namespace Illuminate\Database\Events
$ ModelsPruned#modelProperty in class ModelsPruned

The class name of the model that was pruned.

$ NoPendingMigrations#methodProperty in class NoPendingMigrations

The migration method that was called.

$ LazyLoadingViolationException#modelProperty in class LazyLoadingViolationException

The name of the affected Eloquent model.

MigrationServiceProviderClass in namespace Illuminate\Database
MigrationClass in namespace Illuminate\Database\Migrations
MigrationCreatorClass in namespace Illuminate\Database\Migrations
MigrationRepositoryInterfaceClass in namespace Illuminate\Database\Migrations
MigratorClass in namespace Illuminate\Database\Migrations
MultipleColumnsSelectedExceptionClass in namespace Illuminate\Database
MultipleRecordsFoundExceptionClass in namespace Illuminate\Database
MySqlConnectionClass in namespace Illuminate\Database
MySqlDriverClass in namespace Illuminate\Database\PDO
Builder::mergeWheres() — Method in class Builder

Merge an array of where clauses and bindings.

Builder::min() — Method in class Builder

Retrieve the minimum value of a given column.

Builder::max() — Method in class Builder

Retrieve the maximum value of a given column.

Builder::mergeBindings() — Method in class Builder

Merge an array of bindings into our bindings.

MySqlGrammarClass in namespace Illuminate\Database\Query\Grammars
MySqlProcessorClass in namespace Illuminate\Database\Query\Processors
Blueprint::mediumIncrements() — Method in class Blueprint

Create a new auto-incrementing medium integer (3-byte) column on the table.

Blueprint::mediumText() — Method in class Blueprint

Create a new medium text column on the table.

Blueprint::mediumInteger() — Method in class Blueprint

Create a new medium integer (3-byte) column on the table.

Blueprint::macAddress() — Method in class Blueprint

Create a new MAC address column on the table.

Blueprint::multiPoint() — Method in class Blueprint

Create a new multipoint column on the table.

Blueprint::multiLineString() — Method in class Blueprint

Create a new multilinestring column on the table.

Blueprint::multiPolygon() — Method in class Blueprint

Create a new multipolygon column on the table.

Blueprint::multiPolygonZ() — Method in class Blueprint

Create a new multipolygon column on the table.

Blueprint::morphs() — Method in class Blueprint

Add the proper columns for a polymorphic table.

Builder::morphUsingUuids() — Method in class Builder

Set the default morph key type for migrations to UUIDs.

Builder::morphUsingUlids() — Method in class Builder

Set the default morph key type for migrations to ULIDs.

ChangeColumn::mapFluentOptionToDoctrine() — Method in class ChangeColumn

Get the matching Doctrine option for a given Fluent attribute name.

ChangeColumn::mapFluentValueToDoctrine() — Method in class ChangeColumn

Get the matching Doctrine value for a given Fluent attribute.

$ Grammar#modifiersProperty in class Grammar

The possible column modifiers.

MySqlGrammarClass in namespace Illuminate\Database\Schema\Grammars
$ MySqlGrammar#modifiersProperty in class MySqlGrammar

The possible column modifiers.

MySqlGrammar::modifyVirtualAs() — Method in class MySqlGrammar

Get the SQL for a generated virtual column modifier.

MySqlGrammar::modifyStoredAs() — Method in class MySqlGrammar

Get the SQL for a generated stored column modifier.

MySqlGrammar::modifyUnsigned() — Method in class MySqlGrammar

Get the SQL for an unsigned column modifier.

MySqlGrammar::modifyCharset() — Method in class MySqlGrammar

Get the SQL for a character set column modifier.

MySqlGrammar::modifyCollate() — Method in class MySqlGrammar

Get the SQL for a collation column modifier.

MySqlGrammar::modifyNullable() — Method in class MySqlGrammar

Get the SQL for a nullable column modifier.

MySqlGrammar::modifyInvisible() — Method in class MySqlGrammar

Get the SQL for an invisible column modifier.

MySqlGrammar::modifyDefault() — Method in class MySqlGrammar

Get the SQL for a default column modifier.

MySqlGrammar::modifyOnUpdate() — Method in class MySqlGrammar

Get the SQL for an "on update" column modifier.

MySqlGrammar::modifyIncrement() — Method in class MySqlGrammar

Get the SQL for an auto-increment column modifier.

MySqlGrammar::modifyFirst() — Method in class MySqlGrammar

Get the SQL for a "first" column modifier.

MySqlGrammar::modifyAfter() — Method in class MySqlGrammar

Get the SQL for an "after" column modifier.

MySqlGrammar::modifyComment() — Method in class MySqlGrammar

Get the SQL for a "comment" column modifier.

MySqlGrammar::modifySrid() — Method in class MySqlGrammar

Get the SQL for a SRID column modifier.

$ PostgresGrammar#modifiersProperty in class PostgresGrammar

The possible column modifiers.

PostgresGrammar::modifyCollate() — Method in class PostgresGrammar

Get the SQL for a collation column modifier.

PostgresGrammar::modifyNullable() — Method in class PostgresGrammar

Get the SQL for a nullable column modifier.

PostgresGrammar::modifyDefault() — Method in class PostgresGrammar

Get the SQL for a default column modifier.

PostgresGrammar::modifyIncrement() — Method in class PostgresGrammar

Get the SQL for an auto-increment column modifier.

PostgresGrammar::modifyVirtualAs() — Method in class PostgresGrammar

Get the SQL for a generated virtual column modifier.

PostgresGrammar::modifyStoredAs() — Method in class PostgresGrammar

Get the SQL for a generated stored column modifier.

PostgresGrammar::modifyGeneratedAs() — Method in class PostgresGrammar

Get the SQL for an identity column modifier.

$ SQLiteGrammar#modifiersProperty in class SQLiteGrammar

The possible column modifiers.

SQLiteGrammar::modifyVirtualAs() — Method in class SQLiteGrammar

Get the SQL for a generated virtual column modifier.

SQLiteGrammar::modifyStoredAs() — Method in class SQLiteGrammar

Get the SQL for a generated stored column modifier.

SQLiteGrammar::modifyNullable() — Method in class SQLiteGrammar

Get the SQL for a nullable column modifier.

SQLiteGrammar::modifyDefault() — Method in class SQLiteGrammar

Get the SQL for a default column modifier.

SQLiteGrammar::modifyIncrement() — Method in class SQLiteGrammar

Get the SQL for an auto-increment column modifier.

$ SqlServerGrammar#modifiersProperty in class SqlServerGrammar

The possible column modifiers.

SqlServerGrammar::modifyCollate() — Method in class SqlServerGrammar

Get the SQL for a collation column modifier.

SqlServerGrammar::modifyNullable() — Method in class SqlServerGrammar

Get the SQL for a nullable column modifier.

SqlServerGrammar::modifyDefault() — Method in class SqlServerGrammar

Get the SQL for a default column modifier.

SqlServerGrammar::modifyIncrement() — Method in class SqlServerGrammar

Get the SQL for an auto-increment column modifier.

SqlServerGrammar::modifyPersisted() — Method in class SqlServerGrammar

Get the SQL for a generated stored column modifier.

MySqlBuilderClass in namespace Illuminate\Database\Schema
MySqlSchemaStateClass in namespace Illuminate\Database\Schema
$ SchemaState#migrationTableProperty in class SchemaState

The name of the application's migration table.

SchemaState::makeProcess() — Method in class SchemaState

Create a new process instance.

MissingAppKeyExceptionClass in namespace Illuminate\Encryption
$ CallQueuedListener#methodProperty in class CallQueuedListener

The listener method.

$ CallQueuedListener#maxExceptionsProperty in class CallQueuedListener

The maximum number of exceptions allowed, regardless of attempts.

Dispatcher::makeListener() — Method in class Dispatcher

Register an event listener with the dispatcher.

Filesystem::missing() — Method in class Filesystem

Determine if a file or directory is missing.

Filesystem::move() — Method in class Filesystem

Move a file to a new location.

Filesystem::mimeType() — Method in class Filesystem

Get the mime-type of a given file.

Filesystem::makeDirectory() — Method in class Filesystem

Create a directory.

Filesystem::moveDirectory() — Method in class Filesystem

Move a directory.

FilesystemAdapter::missing() — Method in class FilesystemAdapter

Determine if a file or directory is missing.

FilesystemAdapter::move() — Method in class FilesystemAdapter

Move a file to a new location.

FilesystemAdapter::mimeType() — Method in class FilesystemAdapter

Get the mime-type of a given file.

FilesystemAdapter::makeDirectory() — Method in class FilesystemAdapter

Create a directory.

Application::markAsRegistered() — Method in class Application

Mark the given provider as registered.

Application::make() — Method in class Application

Resolve the given type from the container.

Application::maintenanceMode() — Method in class Application

Get an instance of the maintenance mode manager implementation.

EventGenerateCommand::makeEventAndListeners() — Method in class EventGenerateCommand

Make the event and listeners for the given event.

EventGenerateCommand::makeListeners() — Method in class EventGenerateCommand

Make the listeners for the given event.

MailMakeCommandClass in namespace Illuminate\Foundation\Console
ModelMakeCommandClass in namespace Illuminate\Foundation\Console
VendorPublishCommand::moveManagedFiles() — Method in class VendorPublishCommand

Move all the files in the given MountManager.

MaintenanceModeDisabledClass in namespace Illuminate\Foundation\Events
MaintenanceModeEnabledClass in namespace Illuminate\Foundation\Events
Handler::map() — Method in class Handler

Register a new exception mapping.

Handler::mapException() — Method in class Handler

Map the exception using a registered mapper if possible.

FormRequest::messages() — Method in class FormRequest

Get custom messages for validator errors.

$ Kernel#middlewareProperty in class Kernel

The application's middleware stack.

$ Kernel#middlewareGroupsProperty in class Kernel

The application's route middleware groups.

$ Kernel#middlewareAliasesProperty in class Kernel

The application's middleware aliases.

$ Kernel#middlewarePriorityProperty in class Kernel

The priority-sorted list of middleware.

MaintenanceModeBypassCookieClass in namespace Illuminate\Foundation\Http
MaintenanceModeManagerClass in namespace Illuminate\Foundation
MixClass in namespace Illuminate\Foundation
$ PackageManifest#manifestPathProperty in class PackageManifest

The manifest path.

$ PackageManifest#manifestProperty in class PackageManifest

The loaded manifest array.

$ ProviderRepository#manifestPathProperty in class ProviderRepository

The path to the manifest file.

$ InteractsWithConsole#mockConsoleOutputProperty in class InteractsWithConsole

Indicates if the console output should be mocked.

InteractsWithContainer::mock() — Method in class InteractsWithContainer

Mock an instance of an object in the container.

MakesHttpRequestsClass in namespace Illuminate\Foundation\Testing\Concerns
RefreshDatabase::migrateUsing() — Method in class RefreshDatabase

The parameters that should be used when running "migrate".

$ RefreshDatabaseState#migratedProperty in class RefreshDatabaseState

Indicates if the test database has been migrated.

CanConfigureMigrationCommands::migrateFreshUsing() — Method in class CanConfigureMigrationCommands

The parameters that should be used when running "migrate:fresh".

WithFaker::makeFaker() — Method in class WithFaker

Create a Faker instance for the given locale.

Wormhole::millisecond() — Method in class Wormhole

Travel forward the given number of milliseconds.

Wormhole::milliseconds() — Method in class Wormhole

Travel forward the given number of milliseconds.

Wormhole::minute() — Method in class Wormhole

Travel forward the given number of minutes.

Wormhole::minutes() — Method in class Wormhole

Travel forward the given number of minutes.

Wormhole::month() — Method in class Wormhole

Travel forward the given number of months.

Wormhole::months() — Method in class Wormhole

Travel forward the given number of months.

$ Vite#manifestFilenameProperty in class Vite

The name of the manifest file.

$ Vite#manifestsProperty in class Vite

The cached manifest files.

Vite::makeTagForChunk() — Method in class Vite

Make tag for the given chunk.

Vite::makePreloadTagForChunk() — Method in class Vite

Make a preload tag for the given chunk.

Vite::makeTag() — Method in class Vite

Generate an appropriate tag for the given URL in HMR mode.

Vite::makeScriptTag() — Method in class Vite

Generate a script tag for the given URL.

Vite::makeStylesheetTag() — Method in class Vite

Generate a stylesheet tag for the given URL in HMR mode.

Vite::makeScriptTagWithAttributes() — Method in class Vite

Generate a script tag with attributes for the given URL.

Vite::makeStylesheetTagWithAttributes() — Method in class Vite

Generate a link tag with attributes for the given URL.

Vite::manifest() — Method in class Vite

Get the the manifest file for the given build directory.

Vite::manifestPath() — Method in class Vite

Get the path to the manifest file for the given build directory.

Vite::manifestHash() — Method in class Vite

Get a unique hash representing the current manifest, or null if there is no manifest.

$ ArgonHasher#memoryProperty in class ArgonHasher

The default memory cost factor.

ArgonHasher::make() — Method in class ArgonHasher

Hash the given value.

ArgonHasher::memory() — Method in class ArgonHasher

Extract the memory cost value from the options array.

BcryptHasher::make() — Method in class BcryptHasher

Hash the given value.

HashManager::make() — Method in class HashManager

Hash the given value.

DeterminesStatusCode::movedPermanently() — Method in class DeterminesStatusCode

Determine if the response code was a 301 "Moved Permanently".

$ PendingRequest#middlewareProperty in class PendingRequest

The middleware callables added by users that will handle requests.

$ PendingRequest#mergableOptionsProperty in class PendingRequest

The Guzzle request options that are mergable via array_merge_recursive.

PendingRequest::maxRedirects() — Method in class PendingRequest

Specify the maximum number of redirects to allow.

PendingRequest::makePromise() — Method in class PendingRequest

Send an asynchronous request to the given URL.

PendingRequest::mergeOptions() — Method in class PendingRequest

Replace the given options with the current request options.

Request::method() — Method in class Request

Get the request method.

InteractsWithContentTypes::matchesType() — Method in class InteractsWithContentTypes

Determine if the given content types match.

InteractsWithInput::missing() — Method in class InteractsWithInput

Determine if the request is missing a given input item key.

Request::method() — Method in class Request

Get the request method.

Request::merge() — Method in class Request

Merge new input into the current request's input array.

Request::mergeIfMissing() — Method in class Request

Merge new input into the request's input, but only when that key is missing from the request.

ConditionallyLoadsAttributes::mergeData() — Method in class ConditionallyLoadsAttributes

Merge the given data in at the given index.

ConditionallyLoadsAttributes::merge() — Method in class ConditionallyLoadsAttributes

Merge a value into the array.

ConditionallyLoadsAttributes::mergeWhen() — Method in class ConditionallyLoadsAttributes

Merge a value if the given condition is truthy.

ConditionallyLoadsAttributes::mergeUnless() — Method in class ConditionallyLoadsAttributes

Merge a value unless the given condition is truthy.

JsonResource::make() — Method in class JsonResource

Create a new resource instance.

PaginatedResourceResponse::meta() — Method in class PaginatedResourceResponse

Gather the meta data for the response.

MergeValueClass in namespace Illuminate\Http\Resources
MissingValueClass in namespace Illuminate\Http\Resources
Response::morphToJson() — Method in class Response

Morph the given content into JSON.

$ File#mimeTypeToReportProperty in class File

The MIME type to report.

File::mimeType() — Method in class File

Set the "MIME type" for the file.

MimeTypeClass in namespace Illuminate\Http\Testing
MessageLoggedClass in namespace Illuminate\Log\Events
$ MessageLogged#messageProperty in class MessageLogged

The log message.

$ Attachment#mimeProperty in class Attachment

The attached file's mime type.

MessageSendingClass in namespace Illuminate\Mail\Events
$ MessageSending#messageProperty in class MessageSending

The Symfony Email instance.

MessageSentClass in namespace Illuminate\Mail\Events
$ MessageSent#messageProperty in class MessageSent
MailManagerClass in namespace Illuminate\Mail
$ MailManager#mailersProperty in class MailManager

The array of resolved mailers.

MailManager::mailer() — Method in class MailManager

Get a mailer instance by name.

MailServiceProviderClass in namespace Illuminate\Mail
MailableClass in namespace Illuminate\Mail
$ Mailable#markdownProperty in class Mailable

The Markdown template for the message (if applicable).

$ Mailable#metadataProperty in class Mailable

The metadata for the message.

$ Mailable#mailerProperty in class Mailable

The name of the mailer that should send the message.

Mailable::markdown() — Method in class Mailable

Set the Markdown template for the message.

Mailable::metadata() — Method in class Mailable

Add a metadata header to the message when supported by the underlying transport.

Mailable::mailer() — Method in class Mailable

Set the name of the mailer that should send the message.

$ Content#markdownProperty in class Content

The Blade view that represents the Markdown version of the message.

Content::markdown() — Method in class Content

Set the Markdown view for the message.

$ Envelope#metadataProperty in class Envelope

The message's meta data.

Envelope::metadata() — Method in class Envelope

Add metadata to the message.

$ Headers#messageIdProperty in class Headers

The message's message ID.

Headers::messageId() — Method in class Headers

Set the message ID.

MailerClass in namespace Illuminate\Mail
MarkdownClass in namespace Illuminate\Mail
MessageClass in namespace Illuminate\Mail
$ Message#messageProperty in class Message

The Symfony Email instance.

$ PendingMail#mailerProperty in class PendingMail

The mailer instance.

$ SendQueuedMailable#mailableProperty in class SendQueuedMailable

The mailable message instance.

$ SendQueuedMailable#maxExceptionsProperty in class SendQueuedMailable

The maximum number of unhandled exceptions to allow before failing.

$ ArrayTransport#messagesProperty in class ArrayTransport

The collection of Symfony Messages.

ArrayTransport::messages() — Method in class ArrayTransport

Retrieve the collection of messages.

MailChannelClass in namespace Illuminate\Notifications\Channels
$ MailChannel#mailerProperty in class MailChannel

The mailer implementation.

$ MailChannel#markdownProperty in class MailChannel

The markdown implementation.

MailChannel::messageBuilder() — Method in class MailChannel

Get the mailer Closure for the message.

DatabaseNotification::markAsRead() — Method in class DatabaseNotification

Mark the notification as read.

DatabaseNotification::markAsUnread() — Method in class DatabaseNotification

Mark the notification as unread.

DatabaseNotificationCollection::markAsRead() — Method in class DatabaseNotificationCollection

Mark all notifications as read.

DatabaseNotificationCollection::markAsUnread() — Method in class DatabaseNotificationCollection

Mark all notifications as unread.

MailMessageClass in namespace Illuminate\Notifications\Messages
$ MailMessage#markdownProperty in class MailMessage

The Markdown template to render (if applicable).

$ MailMessage#metadataProperty in class MailMessage

The metadata for the message.

MailMessage::markdown() — Method in class MailMessage

Set the Markdown template for the notification.

MailMessage::metadata() — Method in class MailMessage

Add a metadata header to the message when supported by the underlying transport.

$ SimpleMessage#mailerProperty in class SimpleMessage

The name of the mailer that should send the notification.

SimpleMessage::mailer() — Method in class SimpleMessage

Set the name of the mailer that should send the notification.

$ NotificationSender#managerProperty in class NotificationSender

The notification manager instance.

$ SendQueuedNotifications#maxExceptionsProperty in class SendQueuedNotifications

The maximum number of unhandled exceptions to allow before failing.

UrlWindow::make() — Method in class UrlWindow

Create a new URL window instance.

$ Pipeline#methodProperty in class Pipeline

The method to call on each pipe.

ManagerClass in namespace Illuminate\Queue\Capsule
$ Manager#managerProperty in class Manager

The queue manager instance.

ListFailedCommand::matchJobName() — Method in class ListFailedCommand

Match the job name from the payload.

MonitorCommandClass in namespace Illuminate\Queue\Console
$ MonitorCommand#managerProperty in class MonitorCommand

The queue manager instance.

DatabaseQueue::marshalJob() — Method in class DatabaseQueue

Marshal the reserved job into a DatabaseJob instance.

DatabaseQueue::markJobAsReserved() — Method in class DatabaseQueue

Mark the given job ID as reserved.

Job::markAsFailed() — Method in class Job

Mark the job as "failed".

Job::maxTries() — Method in class Job

Get the number of times to attempt a job.

Job::maxExceptions() — Method in class Job

Get the number of times to attempt a job after an exception.

$ Listener#maxTriesProperty in class Listener

The number of times to try a job before logging it failed.

Listener::makeProcess() — Method in class Listener

Create a new Symfony process for the worker.

Listener::memoryExceeded() — Method in class Listener

Determine if the memory limit has been exceeded.

LuaScripts::migrateExpiredJobs() — Method in class LuaScripts

Get the Lua script to migrate expired jobs back onto the queue.

ManuallyFailedExceptionClass in namespace Illuminate\Queue
MaxAttemptsExceededExceptionClass in namespace Illuminate\Queue
$ ThrottlesExceptions#maxAttemptsProperty in class ThrottlesExceptions

The maximum number of attempts allowed before rate limiting applies.

$ RedisQueue#migrationBatchSizeProperty in class RedisQueue

The batch size to use when migrating delayed / expired jobs onto the primary queue.

RedisQueue::migrate() — Method in class RedisQueue

Migrate any delayed or expired jobs onto the primary queue.

RedisQueue::migrateExpiredJobs() — Method in class RedisQueue

Migrate the delayed jobs that are ready to the regular queue.

$ Worker#managerProperty in class Worker

The queue manager instance.

Worker::markJobAsFailedIfAlreadyExceedsMaxAttempts() — Method in class Worker

Mark the given job as failed if it has exceeded the maximum allowed attempts.

Worker::markJobAsFailedIfWillExceedMaxAttempts() — Method in class Worker

Mark the given job as failed if it has exceeded the maximum allowed attempts.

Worker::markJobAsFailedIfWillExceedMaxExceptions() — Method in class Worker

Mark the given job as failed if it has exceeded the maximum allowed attempts.

Worker::markJobAsFailedIfItShouldFailOnTimeout() — Method in class Worker

Mark the given job as failed if it should fail on timeouts.

Worker::memoryExceeded() — Method in class Worker

Determine if the memory limit has been exceeded.

Worker::maxAttemptsExceededException() — Method in class Worker

Create an instance of MaxAttemptsExceededException.

$ WorkerOptions#memoryProperty in class WorkerOptions

The maximum amount of RAM the worker may consume.

$ WorkerOptions#maxTriesProperty in class WorkerOptions

The maximum number of times a job may be attempted.

$ WorkerOptions#maxJobsProperty in class WorkerOptions

The maximum number of jobs to run.

$ WorkerOptions#maxTimeProperty in class WorkerOptions

The maximum number of seconds a worker may live.

PhpRedisConnection::mget() — Method in class PhpRedisConnection

Get the values of all the given keys.

$ ConcurrencyLimiter#maxLocksProperty in class ConcurrencyLimiter

The allowed number of concurrent tasks.

$ ConcurrencyLimiterBuilder#maxLocksProperty in class ConcurrencyLimiterBuilder

The maximum number of entities that can hold the lock at the same time.

$ DurationLimiterBuilder#maxLocksProperty in class DurationLimiterBuilder

The maximum number of locks that can be obtained per time window.

AbstractRouteCollection::matchAgainstRoutes() — Method in class AbstractRouteCollection

Determine if a route in the array matches the request.

AbstractRouteCollection::methodNotAllowed() — Method in class AbstractRouteCollection

Throw a method not allowed HTTP exception.

CompiledRouteCollection::match() — Method in class CompiledRouteCollection

Find the first route matching a given request.

MiddlewareMakeCommandClass in namespace Illuminate\Routing\Console
$ Controller#middlewareProperty in class Controller

The middleware registered on the controller.

Controller::middleware() — Method in class Controller

Register middleware on the controller.

ControllerDispatcher::methodExcludedByOptions() — Method in class ControllerDispatcher

Determine if the given options exclude a particular method.

HasMiddleware::middleware() — Method in class HasMiddleware

Get the middleware that should be assigned to the controller.

MiddlewareClass in namespace Illuminate\Routing\Controllers
$ Middleware#middlewareProperty in class Middleware

The middleware that should be assigned.

HostValidator::matches() — Method in class HostValidator

Validate a given rule against a route and request.

MethodValidatorClass in namespace Illuminate\Routing\Matching
MethodValidator::matches() — Method in class MethodValidator

Validate a given rule against a route and request.

SchemeValidator::matches() — Method in class SchemeValidator

Validate a given rule against a route and request.

UriValidator::matches() — Method in class UriValidator

Validate a given rule against a route and request.

ValidatorInterface::matches() — Method in class ValidatorInterface

Validate a given rule against a route and request.

MiddlewareNameResolverClass in namespace Illuminate\Routing
PendingResourceRegistration::middleware() — Method in class PendingResourceRegistration

Add middleware to the resource routes.

PendingResourceRegistration::missing() — Method in class PendingResourceRegistration

Define the callable that should be invoked on a missing model exception.

PendingSingletonResourceRegistration::middleware() — Method in class PendingSingletonResourceRegistration

Add middleware to the resource routes.

ResponseFactory::make() — Method in class ResponseFactory

Create a new response instance.

$ Route#methodsProperty in class Route

The HTTP methods the route responds to.

Route::matches() — Method in class Route

Determine if the route matches a given request.

Route::methods() — Method in class Route

Get the HTTP verbs the route responds to.

Route::missing() — Method in class Route

Define the callable that should be invoked on a missing model exception.

Route::middleware() — Method in class Route

Get or set the middlewares attached to the route.

RouteAction::missingAction() — Method in class RouteAction

Get an action for a route that has no action.

RouteAction::makeInvokable() — Method in class RouteAction

Make an action for an invokable controller.

RouteCollection::match() — Method in class RouteCollection

Find the first route matching a given request.

RouteCollectionInterface::match() — Method in class RouteCollectionInterface

Find the first route matching a given request.

RouteGroup::merge() — Method in class RouteGroup

Merge route groups into a new array.

RouteParameterBinder::matchToKeys() — Method in class RouteParameterBinder

Combine a set of parameter matches with the route's keys.

RouteRegistrar::match() — Method in class RouteRegistrar

Register a new route with the given verbs.

RouteRegistrar::middleware() — Method in class RouteRegistrar
$ Router#middlewareProperty in class Router

All of the short-hand keys for middlewares.

$ Router#middlewareGroupsProperty in class Router

All of the middleware groups.

$ Router#middlewarePriorityProperty in class Router

The priority-sorted list of middleware.

Router::match() — Method in class Router

Register a new route with the given verbs.

Router::mergeWithLastGroup() — Method in class Router

Merge the given array with the last group stack.

Router::mergeGroupAttributesIntoRoute() — Method in class Router

Merge the group stack with the controller action.

Router::matched() — Method in class Router

Register a route matched event listener.

Router::middlewareGroup() — Method in class Router

Register a group of middleware.

Router::model() — Method in class Router

Register a model binder for a wildcard.

SortedMiddleware::middlewareNames() — Method in class SortedMiddleware

Resolve the middleware names to look for in the priority array.

SortedMiddleware::moveMiddleware() — Method in class SortedMiddleware

Splice a middleware into a new position and remove the old entry.

$ ArraySessionHandler#minutesProperty in class ArraySessionHandler

The number of minutes the session should be valid.

$ CacheBasedSessionHandler#minutesProperty in class CacheBasedSessionHandler

The number of minutes to store the data in the cache.

$ CookieSessionHandler#minutesProperty in class CookieSessionHandler

The number of minutes the session should be valid.

$ DatabaseSessionHandler#minutesProperty in class DatabaseSessionHandler

The number of minutes the session should be valid.

$ FileSessionHandler#minutesProperty in class FileSessionHandler

The number of minutes the session should be valid.

$ StartSession#managerProperty in class StartSession

The session manager.

Store::marshalErrorBag() — Method in class Store

Marshal the ViewErrorBag when using JSON serialization for sessions.

Store::missing() — Method in class Store

Determine if the given key is missing from the session data.

Store::mergeNewFlashes() — Method in class Store

Merge new flash keys into the new flash array.

Store::migrate() — Method in class Store

Generate a new session ID for the session.

SymfonySessionDecorator::migrate() — Method in class SymfonySessionDecorator
{@inheritdoc}
Arr::map() — Method in class Arr

Run a map over each of the items in the array.

Benchmark::measure() — Method in class Benchmark

Measure a callable or array of callables over the given number of iterations.

Collection::median() — Method in class Collection

Get the median of a given key.

Collection::mode() — Method in class Collection

Get the mode of a given key.

Collection::map() — Method in class Collection
Collection::mapToDictionary() — Method in class Collection
Collection::mapWithKeys() — Method in class Collection
Collection::merge() — Method in class Collection

Merge the collection with the given items.

Collection::mergeRecursive() — Method in class Collection
DateFactory::macro() — Method in class DateFactory
DateFactory::make() — Method in class DateFactory
DateFactory::maxValue() — Method in class DateFactory
DateFactory::minValue() — Method in class DateFactory
DateFactory::mixin() — Method in class DateFactory
Enumerable::make() — Method in class Enumerable
Enumerable::median() — Method in class Enumerable

Get the median of a given key.

Enumerable::mode() — Method in class Enumerable

Get the mode of a given key.

Enumerable::map() — Method in class Enumerable
Enumerable::mapSpread() — Method in class Enumerable

Run a map over each nested chunk of items.

Enumerable::mapToDictionary() — Method in class Enumerable
Enumerable::mapToGroups() — Method in class Enumerable
Enumerable::mapWithKeys() — Method in class Enumerable
Enumerable::mapInto() — Method in class Enumerable
Enumerable::merge() — Method in class Enumerable

Merge the collection with the given items.

Enumerable::mergeRecursive() — Method in class Enumerable
Enumerable::min() — Method in class Enumerable

Get the min value of a given key.

Enumerable::max() — Method in class Enumerable

Get the max value of a given key.

MathExceptionClass in namespace Illuminate\Support\Exceptions
App::make() — Method in class App
App::maintenanceMode() — Method in class App
App::makeWith() — Method in class App
App::macro() — Method in class App
App::mixin() — Method in class App
Auth::macro() — Method in class Auth
Auth::mixin() — Method in class Auth
Bus::map() — Method in class Bus
Cache::missing() — Method in class Cache
Cache::many() — Method in class Cache
Cache::macro() — Method in class Cache
Cache::mixin() — Method in class Cache
Cache::macroCall() — Method in class Cache
Config::macro() — Method in class Config
Config::mixin() — Method in class Config
Cookie::make() — Method in class Cookie
Cookie::macro() — Method in class Cookie
Cookie::mixin() — Method in class Cookie
DB::macro() — Method in class DB
DB::mixin() — Method in class DB
DB::macroCall() — Method in class DB
Date::macro() — Method in class Date
Date::make() — Method in class Date
Date::maxValue() — Method in class Date
Date::minValue() — Method in class Date
Date::mixin() — Method in class Date
Event::makeListener() — Method in class Event
Event::macro() — Method in class Event
Event::mixin() — Method in class Event
File::missing() — Method in class File
File::move() — Method in class File
File::mimeType() — Method in class File
File::makeDirectory() — Method in class File
File::moveDirectory() — Method in class File
File::macro() — Method in class File
File::mixin() — Method in class File
Hash::make() — Method in class Hash
Http::macro() — Method in class Http
Http::mixin() — Method in class Http
Http::macroCall() — Method in class Http
Http::maxRedirects() — Method in class Http
Http::mergeOptions() — Method in class Http
Lang::macro() — Method in class Lang
Lang::mixin() — Method in class Lang
MailClass in namespace Illuminate\Support\Facades
Mail::mailer() — Method in class Mail
Mail::macro() — Method in class Mail
Mail::mixin() — Method in class Mail
Notification::macro() — Method in class Notification
Notification::mixin() — Method in class Notification
Process::macro() — Method in class Process
Process::mixin() — Method in class Process
Process::macroCall() — Method in class Process
Redirect::macro() — Method in class Redirect
Redirect::mixin() — Method in class Redirect
Redis::macro() — Method in class Redis
Redis::mixin() — Method in class Redis
Redis::macroCall() — Method in class Redis
Request::method() — Method in class Request
Request::merge() — Method in class Request
Request::mergeIfMissing() — Method in class Request
Request::matchesType() — Method in class Request
Request::missing() — Method in class Request
Request::macro() — Method in class Request
Request::mixin() — Method in class Request
Response::make() — Method in class Response
Response::macro() — Method in class Response
Response::mixin() — Method in class Response
Route::match() — Method in class Route
Route::mergeWithLastGroup() — Method in class Route
Route::matched() — Method in class Route
Route::middlewareGroup() — Method in class Route
Route::model() — Method in class Route
Route::macro() — Method in class Route
Route::mixin() — Method in class Route
Route::macroCall() — Method in class Route
Route::middleware() — Method in class Route
Schema::morphUsingUuids() — Method in class Schema
Schema::morphUsingUlids() — Method in class Schema
Session::missing() — Method in class Session
Session::migrate() — Method in class Session
Session::macro() — Method in class Session
Session::mixin() — Method in class Session
Storage::move() — Method in class Storage
Storage::makeDirectory() — Method in class Storage
Storage::missing() — Method in class Storage
Storage::mimeType() — Method in class Storage
Storage::macro() — Method in class Storage
Storage::mixin() — Method in class Storage
Storage::macroCall() — Method in class Storage
URL::macro() — Method in class URL
URL::mixin() — Method in class URL
Validator::make() — Method in class Validator
View::make() — Method in class View
View::markAsRenderedOnce() — Method in class View
View::macro() — Method in class View
View::mixin() — Method in class View
Vite::manifestHash() — Method in class Vite
Vite::macro() — Method in class Vite
Vite::mixin() — Method in class Vite
$ HigherOrderCollectionProxy#methodProperty in class HigherOrderCollectionProxy

The method being proxied.

LazyCollection::make() — Method in class LazyCollection
LazyCollection::median() — Method in class LazyCollection

Get the median of a given key.

LazyCollection::mode() — Method in class LazyCollection

Get the mode of a given key.

LazyCollection::map() — Method in class LazyCollection
LazyCollection::mapToDictionary() — Method in class LazyCollection
LazyCollection::mapWithKeys() — Method in class LazyCollection
LazyCollection::merge() — Method in class LazyCollection

Merge the collection with the given items.

LazyCollection::mergeRecursive() — Method in class LazyCollection
LazyCollection::makeIterator() — Method in class LazyCollection
ManagerClass in namespace Illuminate\Support
MessageBagClass in namespace Illuminate\Support
$ MessageBag#messagesProperty in class MessageBag

All of the registered messages.

MessageBag::merge() — Method in class MessageBag

Merge a new array of messages into the message bag.

MessageBag::messages() — Method in class MessageBag

Get the raw messages in the message bag.

MultipleInstanceManagerClass in namespace Illuminate\Support
MultipleItemsFoundExceptionClass in namespace Illuminate\Support
Pluralizer::matchCase() — Method in class Pluralizer

Attempt to match the case on two strings.

ServiceProvider::mergeConfigFrom() — Method in class ServiceProvider

Merge the given configuration with the existing configuration.

Str::markdown() — Method in class Str

Converts GitHub flavored Markdown into HTML.

Str::mask() — Method in class Str

Masks a portion of a string with a repeated character.

Str::match() — Method in class Str

Get the string matching the given pattern.

Str::matchAll() — Method in class Str

Get the string matching the given pattern.

Stringable::markdown() — Method in class Stringable

Convert GitHub flavored Markdown into HTML.

Stringable::mask() — Method in class Stringable

Masks a portion of a string with a repeated character.

Stringable::match() — Method in class Stringable

Get the string matching the given pattern.

Stringable::matchAll() — Method in class Stringable

Get the string matching the given pattern.

BatchRepositoryFake::markAsFinished() — Method in class BatchRepositoryFake

Mark the batch that has the given ID as finished.

BusFake::map() — Method in class BusFake

Map a command to a handler.

MailFakeClass in namespace Illuminate\Support\Testing\Fakes
$ MailFake#managerProperty in class MailFake

The mailer instance.

$ MailFake#mailablesProperty in class MailFake

All of the mailables that have been sent.

MailFake::mailablesOf() — Method in class MailFake

Get all of the mailed mailables for a given type.

MailFake::mailer() — Method in class MailFake

Get a mailer instance by name.

$ EnumeratesValues#mapProperty in class EnumeratesValues
$ EnumeratesValues#maxProperty in class EnumeratesValues
$ EnumeratesValues#minProperty in class EnumeratesValues
EnumeratesValues::make() — Method in class EnumeratesValues
EnumeratesValues::mapSpread() — Method in class EnumeratesValues
EnumeratesValues::mapToGroups() — Method in class EnumeratesValues
EnumeratesValues::mapInto() — Method in class EnumeratesValues
EnumeratesValues::min() — Method in class EnumeratesValues

Get the min value of a given key.

EnumeratesValues::max() — Method in class EnumeratesValues

Get the max value of a given key.

MacroableClass in namespace Illuminate\Support\Traits
$ Macroable#macrosProperty in class Macroable

The registered string macros.

Macroable::macro() — Method in class Macroable

Register a custom macro.

Macroable::mixin() — Method in class Macroable

Mix another object into the class.

ValidatedInput::missing() — Method in class ValidatedInput

Determine if the validated input is missing one or more keys.

ValidatedInput::merge() — Method in class ValidatedInput

Merge the validated input with the given array of additional data.

CountInDatabase::matches() — Method in class CountInDatabase

Check if the expected and actual count are equal.

HasInDatabase::matches() — Method in class HasInDatabase

Check if the data is found in the given table.

NotSoftDeletedInDatabase::matches() — Method in class NotSoftDeletedInDatabase

Check if the data is found in the given table.

SeeInOrder::matches() — Method in class SeeInOrder

Determine if the rule passes validation.

SoftDeletedInDatabase::matches() — Method in class SoftDeletedInDatabase

Check if the data is found in the given table.

Has::missingAll() — Method in class Has

Assert that none of the given props exist.

Has::missing() — Method in class Has

Assert that the given prop does not exist.

MatchingClass in namespace Illuminate\Testing\Fluent\Concerns
PendingCommand::mockConsoleOutput() — Method in class PendingCommand

Mock the application's console output.

$ ArrayLoader#messagesProperty in class ArrayLoader

All of the translation messages.

MessageSelectorClass in namespace Illuminate\Translation
Translator::makeReplacements() — Method in class Translator

Make the place-holder replacements on a line.

$ ClosureValidationRule#messagesProperty in class ClosureValidationRule

The validation error messages.

ClosureValidationRule::message() — Method in class ClosureValidationRule

Get the validation error messages.

FormatsMessages::makeReplacements() — Method in class FormatsMessages

Replace all error message place-holders with actual values.

Factory::make() — Method in class Factory

Create a new Validator instance.

$ InvokableValidationRule#messagesProperty in class InvokableValidationRule

The validation error messages.

InvokableValidationRule::make() — Method in class InvokableValidationRule

Create a new implicit or explicit Invokable validation rule.

Dimensions::minWidth() — Method in class Dimensions

Set the "min width" constraint.

Dimensions::minHeight() — Method in class Dimensions

Set the "min height" constraint.

Dimensions::maxWidth() — Method in class Dimensions

Set the "max width" constraint.

Dimensions::maxHeight() — Method in class Dimensions

Set the "max height" constraint.

Enum::message() — Method in class Enum

Get the validation error message.

$ File#minimumFileSizeProperty in class File

The minimum size in kilobytes that the file can be.

$ File#maximumFileSizeProperty in class File

The maximum size in kilobytes that the file can be.

$ File#messagesProperty in class File

The error message after validation, if any.

File::min() — Method in class File

Indicate that the uploaded file should be no less than the given number of kilobytes.

File::max() — Method in class File

Indicate that the uploaded file should be no more than the given number of kilobytes.

File::message() — Method in class File

Get the validation error message.

$ Password#minProperty in class Password

The minimum size of the password.

$ Password#mixedCaseProperty in class Password

If the password requires at least one uppercase and one lowercase letter.

$ Password#messagesProperty in class Password

The failure messages, if any.

Password::min() — Method in class Password

Sets the minimum size of the password.

Password::mixedCase() — Method in class Password

Makes the password require at least one uppercase and one lowercase letter.

Password::message() — Method in class Password

Get the validation error message.

ValidationRuleParser::mergeRules() — Method in class ValidationRuleParser

Merge additional rules into a given attribute(s).

ValidationRuleParser::mergeRulesForAttribute() — Method in class ValidationRuleParser

Merge additional rules into a given attribute.

$ Validator#messagesProperty in class Validator

The message bag instance.

Validator::messages() — Method in class Validator

Get the message container for the validator.

$ Component#methodCacheProperty in class Component

The cache of public method names, keyed by class.

ComponentAttributeBag::missing() — Method in class ComponentAttributeBag

Determine if a given attribute is missing from the attribute array.

ComponentAttributeBag::merge() — Method in class ComponentAttributeBag

Merge additional attributes / values into the attribute bag.

ManagesComponentsClass in namespace Illuminate\View\Concerns
ManagesEventsClass in namespace Illuminate\View\Concerns
ManagesFragmentsClass in namespace Illuminate\View\Concerns
ManagesLayoutsClass in namespace Illuminate\View\Concerns
ManagesLoopsClass in namespace Illuminate\View\Concerns
ManagesStacksClass in namespace Illuminate\View\Concerns
ManagesTranslationsClass in namespace Illuminate\View\Concerns
Factory::make() — Method in class Factory

Get the evaluated view contents for the given view.

Factory::markAsRenderedOnce() — Method in class Factory

Mark the given once token as having been rendered.

N

Gate::none() — Method in class Gate

Determine if all of the given abilities should be denied for the current user.

EloquentUserProvider::newModelQuery() — Method in class EloquentUserProvider

Get a new query builder for the model instance.

$ SessionGuard#nameProperty in class SessionGuard

The name of the guard. Typically "web".

AblyBroadcaster::normalizeChannelName() — Method in class AblyBroadcaster

Remove prefix from channel name.

Broadcaster::normalizeChannelHandlerToCallable() — Method in class Broadcaster

Normalize the given callback into a callable.

NullBroadcasterClass in namespace Illuminate\Broadcasting\Broadcasters
UsePusherChannelConventions::normalizeChannelName() — Method in class UsePusherChannelConventions

Remove prefix from channel name.

$ Channel#nameProperty in class Channel

The channel's name.

$ Batch#nameProperty in class Batch

The batch name.

$ PendingBatch#nameProperty in class PendingBatch

The batch name.

PendingBatch::name() — Method in class PendingBatch

Set the name for the batch.

CacheManager::newDynamodbClient() — Method in class CacheManager

Create new DynamoDb Client instance.

$ CacheTableCommand#nameProperty in class CacheTableCommand

The console command name.

$ ClearCommand#nameProperty in class ClearCommand

The console command name.

$ PruneStaleTagsCommand#nameProperty in class PruneStaleTagsCommand

The console command name.

$ Lock#nameProperty in class Lock

The name of the lock.

NoLockClass in namespace Illuminate\Cache
NullStoreClass in namespace Illuminate\Cache
Limit::none() — Method in class Limit

Create a new unlimited rate limit.

$ TagSet#namesProperty in class TagSet

The tag names.

$ Command#nameProperty in class Command

The console command name.

InteractsWithIO::newLine() — Method in class InteractsWithIO

Write a blank line.

NewLineAwareClass in namespace Illuminate\Console\Contracts
NewLineAware::newLineWritten() — Method in class NewLineAware

Whether a newline has already been written.

$ OutputStyle#newLineWrittenProperty in class OutputStyle

If the last output written wrote a new line.

OutputStyle::newLine() — Method in class OutputStyle
{@inheritdoc}
OutputStyle::newLineWritten() — Method in class OutputStyle

Whether a newline has already been written.

Parser::name() — Method in class Parser

Extract the name of the command from the expression.

Event::name() — Method in class Event

Set the human-friendly description of the event.

Event::nextRunDate() — Method in class Event

Determine the next due date for an event.

$ ScheduleClearCacheCommand#nameProperty in class ScheduleClearCacheCommand

The console command name.

$ ScheduleRunCommand#nameProperty in class ScheduleRunCommand

The console command name.

BoundMethod::normalizeMethod() — Method in class BoundMethod

Normalize the given callback into a [email protected] string.

Container::notInstantiable() — Method in class Container

Throw an exception that the concrete is not instantiable.

$ ContextualBindingBuilder#needsProperty in class ContextualBindingBuilder

The abstract target.

ContextualBindingBuilder::needs() — Method in class ContextualBindingBuilder

Define the abstract target that depends on the context.

ContextualBindingBuilder::needs() — Method in class ContextualBindingBuilder

Define the abstract target that depends on the context.

Hasher::needsRehash() — Method in class Hasher

Check if the given hash has been hashed using the given options.

CursorPaginator::nextPageUrl() — Method in class CursorPaginator

The URL for the next page, or null.

CursorPaginator::nextCursor() — Method in class CursorPaginator

Get the "cursor" of the next set of items.

Paginator::nextPageUrl() — Method in class Paginator

The URL for the next page, or null.

ResponseFactory::noContent() — Method in class ResponseFactory

Create a new "no content" response.

Loader::namespaces() — Method in class Loader

Get an array of all the registered namespaces.

View::name() — Method in class View

Get the name of the view.

$ FactoryMakeCommand#nameProperty in class FactoryMakeCommand

The console command name.

$ FreshCommand#nameProperty in class FreshCommand

The console command name.

FreshCommand::needsSeeding() — Method in class FreshCommand

Determine if the developer has requested database seeding.

$ InstallCommand#nameProperty in class InstallCommand

The console command name.

$ RefreshCommand#nameProperty in class RefreshCommand

The console command name.

RefreshCommand::needsSeeding() — Method in class RefreshCommand

Determine if the developer has requested database seeding.

$ ResetCommand#nameProperty in class ResetCommand

The console command name.

$ RollbackCommand#nameProperty in class RollbackCommand

The console command name.

$ StatusCommand#nameProperty in class StatusCommand

The console command name.

$ SeedCommand#nameProperty in class SeedCommand

The console command name.

$ SeederMakeCommand#nameProperty in class SeederMakeCommand

The console command name.

$ ShowModelCommand#nameProperty in class ShowModelCommand

The console command name.

$ WipeCommand#nameProperty in class WipeCommand

The console command name.

BroadcastsEvents::newBroadcastableModelEvent() — Method in class BroadcastsEvents

Create a new broadcastable model event event.

BroadcastsEvents::newBroadcastableEvent() — Method in class BroadcastsEvents

Create a new broadcastable model event for the model.

Builder::newModelInstance() — Method in class Builder

Create a new instance of the model being queried.

HasAttributes::normalizeCastClassResponse() — Method in class HasAttributes

Normalize the response from a custom class caster.

HasRelationships::newHasOne() — Method in class HasRelationships

Instantiate a new HasOne relationship.

HasRelationships::newHasOneThrough() — Method in class HasRelationships

Instantiate a new HasOneThrough relationship.

HasRelationships::newMorphOne() — Method in class HasRelationships

Instantiate a new MorphOne relationship.

HasRelationships::newBelongsTo() — Method in class HasRelationships

Instantiate a new BelongsTo relationship.

HasRelationships::newMorphTo() — Method in class HasRelationships

Instantiate a new MorphTo relationship.

HasRelationships::newHasMany() — Method in class HasRelationships

Instantiate a new HasMany relationship.

HasRelationships::newHasManyThrough() — Method in class HasRelationships

Instantiate a new HasManyThrough relationship.

HasRelationships::newMorphMany() — Method in class HasRelationships

Instantiate a new MorphMany relationship.

HasRelationships::newBelongsToMany() — Method in class HasRelationships

Instantiate a new BelongsToMany relationship.

HasRelationships::newMorphToMany() — Method in class HasRelationships

Instantiate a new MorphToMany relationship.

HasRelationships::newRelatedInstance() — Method in class HasRelationships

Create a new model instance for a related model.

HasRelationships::newRelatedThroughInstance() — Method in class HasRelationships

Create a new model instance for a related "through" model.

HasUlids::newUniqueId() — Method in class HasUlids

Generate a new ULID for the model.

HasUniqueIds::newUniqueId() — Method in class HasUniqueIds

Generate a new key for the model.

HasUuids::newUniqueId() — Method in class HasUuids

Generate a new UUID for the model.

$ Factory#namespaceProperty in class Factory

The default namespace where factories reside.

Factory::new() — Method in class Factory

Get a new factory instance for the given attributes.

Factory::newInstance() — Method in class Factory

Create a new instance of the factory builder with the given mutated properties.

Factory::newModel() — Method in class Factory

Get a new model instance.

HasFactory::newFactory() — Method in class HasFactory

Create a new factory instance for the model.

Model::newInstance() — Method in class Model

Create a new instance of the given model.

Model::newFromBuilder() — Method in class Model

Create a new model instance that is existing.

Model::newQuery() — Method in class Model

Get a new query builder for the model's table.

Model::newModelQuery() — Method in class Model

Get a new query builder that doesn't have any global scopes or eager loading.

Model::newQueryWithoutRelationships() — Method in class Model

Get a new query builder with no relationships loaded.

Model::newQueryWithoutScopes() — Method in class Model

Get a new query builder that doesn't have any global scopes.

Model::newQueryWithoutScope() — Method in class Model

Get a new query instance without a given scope.

Model::newQueryForRestoration() — Method in class Model

Get a new query to restore one or more models by their queueable IDs.

Model::newEloquentBuilder() — Method in class Model

Create a new Eloquent query builder for the model.

Model::newBaseQueryBuilder() — Method in class Model

Get a new query builder instance for the connection.

Model::newCollection() — Method in class Model

Create a new Eloquent Collection instance.

Model::newPivot() — Method in class Model

Create a new pivot model instance.

BelongsTo::newRelatedInstanceFor() — Method in class BelongsTo

Make a new related instance for the given model.

AsPivot::newQueryForRestoration() — Method in class AsPivot

Get a new query to restore one or more models by their queueable IDs.

AsPivot::newQueryForCollectionRestoration() — Method in class AsPivot

Get a new query to restore multiple models by their queueable IDs.

CanBeOneOfMany::newOneOfManySubQuery() — Method in class CanBeOneOfMany

Get a new query for the related model, grouping the query by the given column, often the foreign key of the relationship.

InteractsWithPivotTable::newPivot() — Method in class InteractsWithPivotTable

Create a new pivot model instance.

InteractsWithPivotTable::newExistingPivot() — Method in class InteractsWithPivotTable

Create a new existing pivot model instance.

InteractsWithPivotTable::newPivotStatement() — Method in class InteractsWithPivotTable

Get a new plain query builder for the pivot table.

InteractsWithPivotTable::newPivotStatementForId() — Method in class InteractsWithPivotTable

Get a new pivot statement for a given "other" ID.

InteractsWithPivotTable::newPivotQuery() — Method in class InteractsWithPivotTable

Create a new query builder for the pivot table.

SupportsDefaultModels::newRelatedInstanceFor() — Method in class SupportsDefaultModels

Make a new related instance for the given model.

HasOne::newRelatedInstanceFor() — Method in class HasOne

Make a new related instance for the given model.

HasOneThrough::newRelatedInstanceFor() — Method in class HasOneThrough

Make a new related instance for the given model.

MorphOne::newRelatedInstanceFor() — Method in class MorphOne

Make a new related instance for the given model.

MorphPivot::newQueryForRestoration() — Method in class MorphPivot

Get a new query to restore one or more models by their queueable IDs.

MorphPivot::newQueryForCollectionRestoration() — Method in class MorphPivot

Get a new query to restore multiple models by their queueable IDs.

MorphTo::newRelatedInstanceFor() — Method in class MorphTo

Make a new related instance for the given model.

MorphToMany::newPivotQuery() — Method in class MorphToMany

Create a new query builder for the pivot table.

MorphToMany::newPivot() — Method in class MorphToMany

Create a new pivot model instance.

Relation::noConstraints() — Method in class Relation

Run a callback with constraints disabled on the relation.

NoPendingMigrationsClass in namespace Illuminate\Database\Events
Builder::newJoinClause() — Method in class Builder

Get a new join clause.

Builder::numericAggregate() — Method in class Builder

Execute a numeric aggregate function on the database.

Builder::newQuery() — Method in class Builder

Get a new instance of the query builder.

JoinClause::newQuery() — Method in class JoinClause

Get a new instance of the join clause builder.

JoinClause::newParentQuery() — Method in class JoinClause

Create a new parent query instance.

Blueprint::nullableTimestamps() — Method in class Blueprint

Add nullable creation and update timestamps to the table.

Blueprint::nullableMorphs() — Method in class Blueprint

Add nullable columns for a polymorphic table.

Blueprint::numericMorphs() — Method in class Blueprint

Add the proper columns for a polymorphic table using numeric IDs (incremental).

Blueprint::nullableNumericMorphs() — Method in class Blueprint

Add nullable columns for a polymorphic table using numeric IDs (incremental).

Blueprint::nullableUuidMorphs() — Method in class Blueprint

Add nullable columns for a polymorphic table using UUIDs.

Blueprint::nullableUlidMorphs() — Method in class Blueprint

Add nullable columns for a polymorphic table using ULIDs.

ColumnDefinition::nullable() — Method in class ColumnDefinition

Allow NULL values to be inserted into the column

ForeignKeyDefinition::nullOnDelete() — Method in class ForeignKeyDefinition

Indicate that deletes should set the foreign key value to null.

ForeignKeyDefinition::noActionOnDelete() — Method in class ForeignKeyDefinition

Indicate that deletes should have "no action".

NullDispatcherClass in namespace Illuminate\Events
Filesystem::name() — Method in class Filesystem

Extract the file name from a file path.

$ Application#namespaceProperty in class Application

The application namespace.

Application::normalizeCachePath() — Method in class Application

Normalize a relative or absolute path to a cache file.

AuthorizesRequests::normalizeGuessedAbilityName() — Method in class AuthorizesRequests

Normalize the ability name that has been guessed from the method name.

$ CastMakeCommand#nameProperty in class CastMakeCommand

The console command name.

$ ChannelListCommand#nameProperty in class ChannelListCommand

The console command name.

$ ChannelMakeCommand#nameProperty in class ChannelMakeCommand

The console command name.

$ ClearCompiledCommand#nameProperty in class ClearCompiledCommand

The console command name.

$ ComponentMakeCommand#nameProperty in class ComponentMakeCommand

The console command name.

$ ConfigCacheCommand#nameProperty in class ConfigCacheCommand

The console command name.

$ ConfigClearCommand#nameProperty in class ConfigClearCommand

The console command name.

$ ConsoleMakeCommand#nameProperty in class ConsoleMakeCommand

The console command name.

$ EnvironmentCommand#nameProperty in class EnvironmentCommand

The console command name.

$ EventClearCommand#nameProperty in class EventClearCommand

The console command name.

$ EventGenerateCommand#nameProperty in class EventGenerateCommand

The console command name.

$ EventMakeCommand#nameProperty in class EventMakeCommand

The console command name.

$ ExceptionMakeCommand#nameProperty in class ExceptionMakeCommand

The console command name.

$ JobMakeCommand#nameProperty in class JobMakeCommand

The console command name.

$ ListenerMakeCommand#nameProperty in class ListenerMakeCommand

The console command name.

$ MailMakeCommand#nameProperty in class MailMakeCommand

The console command name.

$ ModelMakeCommand#nameProperty in class ModelMakeCommand

The console command name.

NotificationMakeCommandClass in namespace Illuminate\Foundation\Console
$ NotificationMakeCommand#nameProperty in class NotificationMakeCommand

The console command name.

$ ObserverMakeCommand#nameProperty in class ObserverMakeCommand

The console command name.

$ OptimizeClearCommand#nameProperty in class OptimizeClearCommand

The console command name.

$ OptimizeCommand#nameProperty in class OptimizeCommand

The console command name.

$ PolicyMakeCommand#nameProperty in class PolicyMakeCommand

The console command name.

$ ProviderMakeCommand#nameProperty in class ProviderMakeCommand

The console command name.

$ RequestMakeCommand#nameProperty in class RequestMakeCommand

The console command name.

$ ResourceMakeCommand#nameProperty in class ResourceMakeCommand

The console command name.

$ RouteCacheCommand#nameProperty in class RouteCacheCommand

The console command name.

$ RouteClearCommand#nameProperty in class RouteClearCommand

The console command name.

$ RouteListCommand#nameProperty in class RouteListCommand

The console command name.

$ RuleMakeCommand#nameProperty in class RuleMakeCommand

The console command name.

$ ScopeMakeCommand#nameProperty in class ScopeMakeCommand

The console command name.

$ ServeCommand#nameProperty in class ServeCommand

The console command name.

$ TestMakeCommand#nameProperty in class TestMakeCommand

The console command name.

$ UpCommand#nameProperty in class UpCommand

The console command name.

$ ViewClearCommand#nameProperty in class ViewClearCommand

The console command name.

VerifyCsrfToken::newCookie() — Method in class VerifyCsrfToken

Create a new "XSRF-TOKEN" cookie that contains the CSRF token.

$ RouteServiceProvider#namespaceProperty in class RouteServiceProvider

The controller namespace for the application.

InteractsWithDatabase::newModelFor() — Method in class InteractsWithDatabase

Get the model entity from the given model or string.

$ Vite#nonceProperty in class Vite

The Content Security Policy nonce to apply to all generated tags.

ArgonHasher::needsRehash() — Method in class ArgonHasher

Check if the given hash has been hashed using the given options.

BcryptHasher::needsRehash() — Method in class BcryptHasher

Check if the given hash has been hashed using the given options.

HashManager::needsRehash() — Method in class HashManager

Check if the given hash has been hashed using the given options.

DeterminesStatusCode::noContent() — Method in class DeterminesStatusCode

Determine if the response code was the given status code and the body has no content.

DeterminesStatusCode::notFound() — Method in class DeterminesStatusCode

Determine if the response was a 404 "Not Found" response.

Factory::newPendingRequest() — Method in class Factory

Create a new pending request instance for this factory.

JsonResource::newCollection() — Method in class JsonResource

Create a new resource collection instance.

$ File#nameProperty in class File

The name of the file.

LogManager::notice() — Method in class LogManager

Normal but significant events.

Logger::notice() — Method in class Logger

Log a notice to the logs.

Mailable::newQueuedJob() — Method in class Mailable

Make the queued mailable job instance.

Mailable::normalizeRecipient() — Method in class Mailable

Convert the given recipient into an object.

$ Address#nameProperty in class Address

The recipient's name.

Envelope::normalizeAddresses() — Method in class Envelope

Normalize the given array of addresses.

$ Mailer#nameProperty in class Mailer

The name that is configured for the mailer.

AnonymousNotifiable::notify() — Method in class AnonymousNotifiable

Send the given notification.

AnonymousNotifiable::notifyNow() — Method in class AnonymousNotifiable

Send the given notification immediately.

NotificationTableCommandClass in namespace Illuminate\Notifications\Console
$ NotificationTableCommand#nameProperty in class NotificationTableCommand

The console command name.

DatabaseNotification::notifiable() — Method in class DatabaseNotification

Get the notifiable entity that the notification belongs to.

DatabaseNotification::newCollection() — Method in class DatabaseNotification

Create a new database notification collection instance.

$ BroadcastNotificationCreated#notifiableProperty in class BroadcastNotificationCreated

The notifiable entity who received the notification.

$ BroadcastNotificationCreated#notificationProperty in class BroadcastNotificationCreated

The notification instance.

NotificationFailedClass in namespace Illuminate\Notifications\Events
$ NotificationFailed#notifiableProperty in class NotificationFailed

The notifiable entity who received the notification.

$ NotificationFailed#notificationProperty in class NotificationFailed

The notification instance.

NotificationSendingClass in namespace Illuminate\Notifications\Events
$ NotificationSending#notifiableProperty in class NotificationSending

The notifiable entity who received the notification.

$ NotificationSending#notificationProperty in class NotificationSending

The notification instance.

NotificationSentClass in namespace Illuminate\Notifications\Events
$ NotificationSent#notifiableProperty in class NotificationSent

The notifiable entity who received the notification.

$ NotificationSent#notificationProperty in class NotificationSent

The notification instance.

HasDatabaseNotifications::notifications() — Method in class HasDatabaseNotifications

Get the entity's notifications.

NotifiableClass in namespace Illuminate\Notifications
NotificationClass in namespace Illuminate\Notifications
NotificationSenderClass in namespace Illuminate\Notifications
NotificationServiceProviderClass in namespace Illuminate\Notifications
RoutesNotifications::notify() — Method in class RoutesNotifications

Send the given notification.

RoutesNotifications::notifyNow() — Method in class RoutesNotifications

Send the given notification immediately.

$ SendQueuedNotifications#notifiablesProperty in class SendQueuedNotifications

The notifiable entities that should receive the notification.

$ SendQueuedNotifications#notificationProperty in class SendQueuedNotifications

The notification to be sent.

AbstractCursorPaginator::nextPageUrl() — Method in class AbstractCursorPaginator

The URL for the next page, or null.

AbstractCursorPaginator::nextCursor() — Method in class AbstractCursorPaginator

Get the "cursor" that points to the next set of items.

LengthAwarePaginator::nextPageUrl() — Method in class LengthAwarePaginator

Get the URL for the next page.

Paginator::nextPageUrl() — Method in class Paginator

Get the URL for the next page.

Factory::newPendingProcess() — Method in class Factory

Create a new pending process associated with this factory.

$ FakeInvokedProcess#nextOutputIndexProperty in class FakeInvokedProcess

The current output's index.

$ FakeInvokedProcess#nextErrorOutputIndexProperty in class FakeInvokedProcess

The current error output's index.

FakeProcessResult::normalizeOutput() — Method in class FakeProcessResult

Normalize the given output into a string with newlines.

NullConnectorClass in namespace Illuminate\Queue\Connectors
$ BatchesTableCommand#nameProperty in class BatchesTableCommand

The console command name.

$ ClearCommand#nameProperty in class ClearCommand

The console command name.

$ FailedTableCommand#nameProperty in class FailedTableCommand

The console command name.

$ ListFailedCommand#nameProperty in class ListFailedCommand

The console command name.

$ RestartCommand#nameProperty in class RestartCommand

The console command name.

$ TableCommand#nameProperty in class TableCommand

The console command name.

WorkCommand::now() — Method in class WorkCommand

Get the current date / time.

NullFailedJobProviderClass in namespace Illuminate\Queue\Failed
NullQueueClass in namespace Illuminate\Queue
$ Worker#nameProperty in class Worker

The name of the worker.

$ WorkerOptions#nameProperty in class WorkerOptions

The name of the worker.

$ Connection#nameProperty in class Connection

The Redis connection name.

$ ConcurrencyLimiter#nameProperty in class ConcurrencyLimiter

The name of the limiter.

$ ConcurrencyLimiterBuilder#nameProperty in class ConcurrencyLimiterBuilder

The name of the lock.

$ DurationLimiterBuilder#nameProperty in class DurationLimiterBuilder

The name of the lock.

CompiledRouteCollection::newRoute() — Method in class CompiledRouteCollection

Resolve an array of attributes to a Route instance.

$ ControllerMakeCommand#nameProperty in class ControllerMakeCommand

The console command name.

$ MiddlewareMakeCommand#nameProperty in class MiddlewareMakeCommand

The console command name.

$ PendingResourceRegistration#nameProperty in class PendingResourceRegistration

The resource name.

PendingResourceRegistration::names() — Method in class PendingResourceRegistration

Set the route names for controller actions.

PendingResourceRegistration::name() — Method in class PendingResourceRegistration

Set the route name for a controller action.

$ PendingSingletonResourceRegistration#nameProperty in class PendingSingletonResourceRegistration

The resource name.

PendingSingletonResourceRegistration::names() — Method in class PendingSingletonResourceRegistration

Set the route names for controller actions.

PendingSingletonResourceRegistration::name() — Method in class PendingSingletonResourceRegistration

Set the route name for a controller action.

ResponseFactory::noContent() — Method in class ResponseFactory

Create a new "no content" response.

Route::name() — Method in class Route

Add or change the route name.

Route::named() — Method in class Route

Determine whether the route's name matches the given patterns.

$ RouteCollection#nameListProperty in class RouteCollection

A look-up table of routes by their names.

RouteRegistrar::name() — Method in class RouteRegistrar
RouteRegistrar::namespace() — Method in class RouteRegistrar
Router::newRoute() — Method in class Router

Create a new Route object.

$ SessionTableCommand#nameProperty in class SessionTableCommand

The console command name.

NullSessionHandlerClass in namespace Illuminate\Session
$ Store#nameProperty in class Store

The session name.

Store::now() — Method in class Store

Flash a key / value pair to the session for immediate use.

Collection::nth() — Method in class Collection

Create a new collection consisting of every n-th element.

DateFactory::now() — Method in class DateFactory
Enumerable::nth() — Method in class Enumerable

Create a new collection consisting of every n-th element.

Blade::newComponentHash() — Method in class Blade
Date::now() — Method in class Date
File::name() — Method in class File
Gate::none() — Method in class Gate
Hash::needsRehash() — Method in class Hash
Log::notice() — Method in class Log
NotificationClass in namespace Illuminate\Support\Facades
Process::newPendingProcess() — Method in class Process
Request::normalizeQueryString() — Method in class Request
Response::noContent() — Method in class Response
Route::newRoute() — Method in class Route
Route::name() — Method in class Route
Route::namespace() — Method in class Route
Session::now() — Method in class Session
$ HigherOrderWhenProxy#negateConditionOnCaptureProperty in class HigherOrderWhenProxy

Determine whether the condition should be negated.

HigherOrderWhenProxy::negateConditionOnCapture() — Method in class HigherOrderWhenProxy

Indicate that the condition should be negated.

LazyCollection::nth() — Method in class LazyCollection

Create a new collection consisting of every n-th element.

LazyCollection::now() — Method in class LazyCollection

Get the current time.

NamespacedItemResolverClass in namespace Illuminate\Support
Stringable::newLine() — Method in class Stringable

Append a new line to the string.

NotificationFakeClass in namespace Illuminate\Support\Testing\Fakes
$ NotificationFake#notificationsProperty in class NotificationFake

All of the notifications that have been sent.

NotificationFake::notificationsFor() — Method in class NotificationFake

Get all of the notifications for a notifiable entity by type.

EnumeratesValues::negate() — Method in class EnumeratesValues

Make a function using another function, by negating its result.

NotSoftDeletedInDatabaseClass in namespace Illuminate\Testing\Constraints
ArrayLoader::namespaces() — Method in class ArrayLoader

Get an array of all the registered namespaces.

FileLoader::namespaces() — Method in class FileLoader

Get an array of all the registered namespaces.

FormatsMessages::numberToIndexOrPositionWord() — Method in class FormatsMessages

Get the word for a index or position segment.

NestedRulesClass in namespace Illuminate\Validation
NotPwnedVerifierClass in namespace Illuminate\Validation
Rule::notIn() — Method in class Rule

Get a not_in constraint builder instance.

NotInClass in namespace Illuminate\Validation\Rules
$ Password#numbersProperty in class Password

If the password requires at least one number.

Password::numbers() — Method in class Password

Makes the password require at least one number.

ValidationRuleParser::normalizeRule() — Method in class ValidationRuleParser

Normalizes a rule so that we can accept short types.

$ Validator#numericRulesProperty in class Validator

The numeric related validation rules.

$ ComponentTagCompiler#namespacesProperty in class ComponentTagCompiler

The component class namespaces.

CompilesComponents::newComponentHash() — Method in class CompilesComponents

Get a new component hash for a component name.

Component::newAttributeBag() — Method in class Component

Get a new attribute bag instance.

Factory::normalizeName() — Method in class Factory

Normalize a view name.

View::nest() — Method in class View

Add a view instance to the view data.

View::name() — Method in class View

Get the name of the view.

ViewName::normalize() — Method in class ViewName

Normalize the given view name.

O

OtherDeviceLogoutClass in namespace Illuminate\Auth\Events
SessionGuard::once() — Method in class SessionGuard

Log a user into the application without sessions or cookies.

SessionGuard::onceUsingId() — Method in class SessionGuard

Log the given user ID into the application without sessions or cookies.

SessionGuard::onceBasic() — Method in class SessionGuard

Perform a stateless HTTP Basic login attempt.

$ Batch#optionsProperty in class Batch

The batch options.

$ PendingBatch#optionsProperty in class PendingBatch

The batch options.

PendingBatch::onConnection() — Method in class PendingBatch

Specify the queue connection that the batched jobs should run on.

PendingBatch::onQueue() — Method in class PendingBatch

Specify the queue that the batched jobs should run on.

Queueable::onConnection() — Method in class Queueable

Set the desired connection for the job.

Queueable::onQueue() — Method in class Queueable

Set the desired queue for the job.

$ Lock#ownerProperty in class Lock

The scope identifier of this lock.

Lock::owner() — Method in class Lock

Returns the current owner of the lock.

$ MemcachedStore#onVersionThreeProperty in class MemcachedStore

Indicates whether we are using Memcached version >= 3.0.0.

Repository::offsetExists() — Method in class Repository

Determine if a cached value exists.

Repository::offsetGet() — Method in class Repository

Retrieve an item from the cache by key.

Repository::offsetSet() — Method in class Repository

Store an item in the cache for the default time.

Repository::offsetUnset() — Method in class Repository

Remove an item from the cache.

Repository::offsetExists() — Method in class Repository

Determine if the given configuration option exists.

Repository::offsetGet() — Method in class Repository

Get a configuration option.

Repository::offsetSet() — Method in class Repository

Set a configuration option.

Repository::offsetUnset() — Method in class Repository

Unset a configuration option.

Application::output() — Method in class Application

Get the output for the last run command.

$ InteractsWithIO#outputProperty in class InteractsWithIO

The output interface implementation.

InteractsWithIO::option() — Method in class InteractsWithIO

Get the value of a command option.

InteractsWithIO::options() — Method in class InteractsWithIO

Get all of the options passed to the command.

$ CommandFinished#outputProperty in class CommandFinished

The command output implementation.

$ CommandStarting#outputProperty in class CommandStarting

The command output implementation.

OutputStyleClass in namespace Illuminate\Console
CallbackEvent::onOneServer() — Method in class CallbackEvent

Allow the event to only run on one server for each cron expression.

$ Event#onOneServerProperty in class Event

Indicates if the command should only be allowed to run on one server for each cron expression.

$ Event#outputProperty in class Event

The location that output should be sent to.

Event::onOneServer() — Method in class Event

Allow the event to only run on one server for each cron expression.

Event::onSuccess() — Method in class Event

Register a callback to be called if the operation succeeds.

Event::onSuccessWithOutput() — Method in class Event

Register a callback that uses the output if the operation succeeds.

Event::onFailure() — Method in class Event

Register a callback to be called if the operation fails.

Event::onFailureWithOutput() — Method in class Event

Register a callback that uses the output if the operation fails.

$ Component#outputProperty in class Component

The output style implementation.

$ Factory#outputProperty in class Factory

The output interface implementation.

Container::offsetExists() — Method in class Container

Determine if a given offset exists.

Container::offsetGet() — Method in class Container

Get the value at a given offset.

Container::offsetSet() — Method in class Container

Set the value at a given offset.

Container::offsetUnset() — Method in class Container

Unset the value at a given offset.

StatefulGuard::once() — Method in class StatefulGuard

Log a user into the application without sessions or cookies.

StatefulGuard::onceUsingId() — Method in class StatefulGuard

Log the given user ID into the application without sessions or cookies.

SupportsBasicAuth::onceBasic() — Method in class SupportsBasicAuth

Perform a stateless HTTP Basic login attempt.

Lock::owner() — Method in class Lock

Returns the current owner of the lock.

Application::output() — Method in class Application

Get the output from the last command.

Kernel::output() — Method in class Kernel

Get the output for the last run command.

SupportsPartialRelations::ofMany() — Method in class SupportsPartialRelations

Indicate that the relation is a single result of a larger one-to-many relationship.

InvokedProcess::output() — Method in class InvokedProcess

Get the standard output for the process.

ProcessResult::output() — Method in class ProcessResult

Get the standard output of the process.

Registrar::options() — Method in class Registrar

Register a new OPTIONS route with the router.

BuildsQueries::orderedLazyById() — Method in class BuildsQueries

Query lazily, by chunking the results of a query by comparing IDs in a given order.

$ Connector#optionsProperty in class Connector

The default PDO connection options.

$ PostgresConnector#optionsProperty in class PostgresConnector

The default PDO connection options.

$ SqlServerConnector#optionsProperty in class SqlServerConnector

The PDO connection options.

BroadcastableModelEventOccurred::onChannels() — Method in class BroadcastableModelEventOccurred

Manually specify the channels the event should broadcast on.

$ Builder#onDeleteProperty in class Builder

A replacement for the typical delete function.

$ Builder#orWhereProperty in class Builder
$ Builder#orWhereNotProperty in class Builder
Builder::orWhere() — Method in class Builder

Add an "or where" clause to the query.

Builder::orWhereNot() — Method in class Builder

Add an "or where not" clause to the query.

Builder::oldest() — Method in class Builder

Add an "order by" clause for a timestamp to the query.

Builder::onDelete() — Method in class Builder

Register a replacement for the default delete function.

Collection::only() — Method in class Collection
$ HasAttributes#originalProperty in class HasAttributes

The model attribute's original state.

HasAttributes::only() — Method in class HasAttributes

Get a subset of the model's attributes.

HasAttributes::originalIsEquivalent() — Method in class HasAttributes

Determine if the new and old values for a given key are equivalent.

$ HasEvents#observablesProperty in class HasEvents

User exposed observable events.

HasEvents::observe() — Method in class HasEvents

Register observers with the model.

QueriesRelationships::orHas() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query with an "or".

QueriesRelationships::orDoesntHave() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query with an "or".

QueriesRelationships::orWhereHas() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query with where clauses and an "or".

QueriesRelationships::orWhereDoesntHave() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query with where clauses and an "or".

QueriesRelationships::orHasMorph() — Method in class QueriesRelationships

Add a polymorphic relationship count / exists condition to the query with an "or".

QueriesRelationships::orDoesntHaveMorph() — Method in class QueriesRelationships

Add a polymorphic relationship count / exists condition to the query with an "or".

QueriesRelationships::orWhereHasMorph() — Method in class QueriesRelationships

Add a polymorphic relationship count / exists condition to the query with where clauses and an "or".

QueriesRelationships::orWhereDoesntHaveMorph() — Method in class QueriesRelationships

Add a polymorphic relationship count / exists condition to the query with where clauses and an "or".

QueriesRelationships::orWhereRelation() — Method in class QueriesRelationships

Add an "or where" clause to a relationship query.

QueriesRelationships::orWhereMorphRelation() — Method in class QueriesRelationships

Add a polymorphic relationship condition to the query with an "or where" clause.

QueriesRelationships::orWhereMorphedTo() — Method in class QueriesRelationships

Add a morph-to relationship condition to the query with an "or where" clause.

QueriesRelationships::orWhereNotMorphedTo() — Method in class QueriesRelationships

Add a not morph-to relationship condition to the query with an "or where" clause.

QueriesRelationships::orWhereBelongsTo() — Method in class QueriesRelationships

Add an "BelongsTo" relationship with an "or where" clause to the query.

Model::on() — Method in class Model

Begin querying the model on a given connection.

Model::onWriteConnection() — Method in class Model

Begin querying the model on the write connection.

Model::offsetExists() — Method in class Model

Determine if the given attribute exists.

Model::offsetGet() — Method in class Model

Get the value for a given offset.

Model::offsetSet() — Method in class Model

Set the value for a given offset.

Model::offsetUnset() — Method in class Model

Unset the value for a given offset.

$ BelongsTo#ownerKeyProperty in class BelongsTo

The associated key on the parent model.

BelongsToMany::orWherePivotBetween() — Method in class BelongsToMany

Set a "or where between" clause for a pivot table column.

BelongsToMany::orWherePivotNotBetween() — Method in class BelongsToMany

Set a "or where not between" clause for a pivot table column.

BelongsToMany::orWherePivot() — Method in class BelongsToMany

Set an "or where" clause for a pivot table column.

BelongsToMany::orWherePivotIn() — Method in class BelongsToMany

Set an "or where in" clause for a pivot table column.

BelongsToMany::orWherePivotNotIn() — Method in class BelongsToMany

Set an "or where not in" clause for a pivot table column.

BelongsToMany::orWherePivotNull() — Method in class BelongsToMany

Set a "or where null" clause for a pivot table column.

BelongsToMany::orWherePivotNotNull() — Method in class BelongsToMany

Set a "or where not null" clause for a pivot table column.

BelongsToMany::orderByPivot() — Method in class BelongsToMany

Add an "order by" clause for a pivot table column.

$ CanBeOneOfMany#oneOfManySubQueryProperty in class CanBeOneOfMany

The one of many inner join subselect query builder instance.

CanBeOneOfMany::ofMany() — Method in class CanBeOneOfMany

Indicate that the relation is a single result of a larger one-to-many relationship.

CanBeOneOfMany::oldestOfMany() — Method in class CanBeOneOfMany

Indicate that the relation is the oldest single result of a larger one-to-many relationship.

HasMany::one() — Method in class HasMany

Convert the relationship to a "has one" relationship.

HasManyThrough::one() — Method in class HasManyThrough

Convert the relationship to a "has one through" relationship.

MorphMany::one() — Method in class MorphMany

Convert the relationship to a "morph one" relationship.

SoftDeletes::onlyTrashed() — Method in class SoftDeletes
$ Migrator#outputProperty in class Migrator

The output interface implementation.

$ Builder#ordersProperty in class Builder

The orderings for the query.

$ Builder#offsetProperty in class Builder

The number of records to skip.

$ Builder#operatorsProperty in class Builder

All of the available clause operators.

Builder::orWhere() — Method in class Builder

Add an "or where" clause to the query.

Builder::orWhereNot() — Method in class Builder

Add an "or where not" clause to the query.

Builder::orWhereColumn() — Method in class Builder

Add an "or where" clause comparing two columns to the query.

Builder::orWhereRaw() — Method in class Builder

Add a raw or where clause to the query.

Builder::orWhereIn() — Method in class Builder

Add an "or where in" clause to the query.

Builder::orWhereNotIn() — Method in class Builder

Add an "or where not in" clause to the query.

Builder::orWhereIntegerInRaw() — Method in class Builder

Add an "or where in raw" clause for integer values to the query.

Builder::orWhereIntegerNotInRaw() — Method in class Builder

Add an "or where not in raw" clause for integer values to the query.

Builder::orWhereNull() — Method in class Builder

Add an "or where null" clause to the query.

Builder::orWhereBetween() — Method in class Builder

Add an or where between statement to the query.

Builder::orWhereBetweenColumns() — Method in class Builder

Add an or where between statement using columns to the query.

Builder::orWhereNotBetween() — Method in class Builder

Add an or where not between statement to the query.

Builder::orWhereNotBetweenColumns() — Method in class Builder

Add an or where not between statement using columns to the query.

Builder::orWhereNotNull() — Method in class Builder

Add an "or where not null" clause to the query.

Builder::orWhereDate() — Method in class Builder

Add an "or where date" statement to the query.

Builder::orWhereTime() — Method in class Builder

Add an "or where time" statement to the query.

Builder::orWhereDay() — Method in class Builder

Add an "or where day" statement to the query.

Builder::orWhereMonth() — Method in class Builder

Add an "or where month" statement to the query.

Builder::orWhereYear() — Method in class Builder

Add an "or where year" statement to the query.

Builder::orWhereExists() — Method in class Builder

Add an or exists clause to the query.

Builder::orWhereNotExists() — Method in class Builder

Add a where not exists clause to the query.

Builder::orWhereRowValues() — Method in class Builder

Adds an or where condition using row values.

Builder::orWhereJsonContains() — Method in class Builder

Add an "or where JSON contains" clause to the query.

Builder::orWhereJsonDoesntContain() — Method in class Builder

Add an "or where JSON not contains" clause to the query.

Builder::orWhereJsonContainsKey() — Method in class Builder

Add an "or" clause that determines if a JSON path exists to the query.

Builder::orWhereJsonDoesntContainKey() — Method in class Builder

Add an "or" clause that determines if a JSON path does not exist to the query.

Builder::orWhereJsonLength() — Method in class Builder

Add an "or where JSON length" clause to the query.

Builder::orWhereFullText() — Method in class Builder

Add a "or where fulltext" clause to the query.

Builder::orHaving() — Method in class Builder

Add an "or having" clause to the query.

Builder::orHavingNull() — Method in class Builder

Add an "or having null" clause to the query.

Builder::orHavingNotNull() — Method in class Builder

Add an "or having not null" clause to the query.

Builder::orHavingRaw() — Method in class Builder

Add a raw or having clause to the query.

Builder::orderBy() — Method in class Builder

Add an "order by" clause to the query.

Builder::orderByDesc() — Method in class Builder

Add a descending "order by" clause to the query.

Builder::oldest() — Method in class Builder

Add an "order by" clause for a timestamp to the query.

Builder::orderByRaw() — Method in class Builder

Add a raw "order by" clause to the query.

Builder::offset() — Method in class Builder

Set the "offset" value of the query.

Builder::onceWithColumns() — Method in class Builder

Execute the given callback while selecting the given columns.

$ Grammar#operatorsProperty in class Grammar

The grammar specific operators.

$ MySqlGrammar#operatorsProperty in class MySqlGrammar

The grammar specific operators.

$ PostgresGrammar#operatorsProperty in class PostgresGrammar

All of the available clause operators.

$ SQLiteGrammar#operatorsProperty in class SQLiteGrammar

All of the available clause operators.

$ SqlServerGrammar#operatorsProperty in class SqlServerGrammar

All of the available clause operators.

JoinClause::on() — Method in class JoinClause

Add an "on" clause to the join.

JoinClause::orOn() — Method in class JoinClause

Add an "or on" clause to the join.

ForeignKeyDefinition::on() — Method in class ForeignKeyDefinition

Specify the referenced table

ForeignKeyDefinition::onDelete() — Method in class ForeignKeyDefinition

Add an ON DELETE action

ForeignKeyDefinition::onUpdate() — Method in class ForeignKeyDefinition

Add an ON UPDATE action

$ SchemaState#outputProperty in class SchemaState

The output callable instance.

QueuedClosure::onConnection() — Method in class QueuedClosure

Set the desired connection for the job.

QueuedClosure::onQueue() — Method in class QueuedClosure

Set the desired queue for the job.

PendingChain::onConnection() — Method in class PendingChain

Set the desired connection for the job.

PendingChain::onQueue() — Method in class PendingChain

Set the desired queue for the job.

PendingDispatch::onConnection() — Method in class PendingDispatch

Set the desired connection for the job.

PendingDispatch::onQueue() — Method in class PendingDispatch

Set the desired queue for the job.

$ CliDumper#outputProperty in class CliDumper

The output instance.

DocsCommand::openUrl() — Method in class DocsCommand

Open the documentation URL.

DocsCommand::open() — Method in class DocsCommand

Open the URL in the user's browser.

DocsCommand::openViaCustomStrategy() — Method in class DocsCommand

Open the URL via a custom strategy.

DocsCommand::openViaBuiltInStrategy() — Method in class DocsCommand

Open the URL via the built in strategy.

EnvironmentDecryptCommand::outputFilePath() — Method in class EnvironmentDecryptCommand

Get the output file path that should be used for the command.

Kernel::output() — Method in class Kernel

Get the output for the last run command.

ObserverMakeCommandClass in namespace Illuminate\Foundation\Console
OptimizeClearCommandClass in namespace Illuminate\Foundation\Console
OptimizeCommandClass in namespace Illuminate\Foundation\Console
$ EventServiceProvider#observersProperty in class EventServiceProvider

The model observers to register.

$ InteractsWithContainer#originalViteProperty in class InteractsWithContainer

The original Vite handler.

$ InteractsWithContainer#originalMixProperty in class InteractsWithContainer

The original Laravel Mix handler.

$ InteractsWithDeprecationHandling#originalDeprecationHandlerProperty in class InteractsWithDeprecationHandling

The original deprecation handler.

$ InteractsWithExceptionHandling#originalExceptionHandlerProperty in class InteractsWithExceptionHandling

The original exception handler.

$ InteractsWithExceptionHandling#originalHandlerProperty in class InteractsWithExceptionHandling
DeterminesStatusCode::ok() — Method in class DeterminesStatusCode

Determine if the response code was 200 "OK" response.

$ PendingRequest#optionsProperty in class PendingRequest

The request options.

Request::offsetExists() — Method in class Request

Determine if the given offset exists.

Request::offsetGet() — Method in class Request

Get the value for a given offset.

Request::offsetSet() — Method in class Request

Set the value at the given offset.

Request::offsetUnset() — Method in class Request

Unset the value at the given offset.

Response::object() — Method in class Response

Get the JSON decoded body of the response as an object.

Response::onError() — Method in class Response

Execute the given callback if there was a server or client error.

Response::offsetExists() — Method in class Response

Determine if the given offset exists.

Response::offsetGet() — Method in class Response

Get the value for a given offset.

Response::offsetSet() — Method in class Response

Set the value at the given offset.

Response::offsetUnset() — Method in class Response

Unset the value at the given offset.

InteractsWithFlashData::old() — Method in class InteractsWithFlashData

Retrieve an old input item.

InteractsWithInput::only() — Method in class InteractsWithInput

Get a subset containing the provided keys with values from the input data.

RedirectResponse::onlyInput() — Method in class RedirectResponse

Flash an array of input to the session.

Request::offsetExists() — Method in class Request

Determine if the given offset exists.

Request::offsetGet() — Method in class Request

Get the value at the given offset.

Request::offsetSet() — Method in class Request

Set the value at the given offset.

Request::offsetUnset() — Method in class Request

Remove the value at the given offset.

DelegatesToResource::offsetExists() — Method in class DelegatesToResource

Determine if the given attribute exists.

DelegatesToResource::offsetGet() — Method in class DelegatesToResource

Get the value for a given offset.

DelegatesToResource::offsetSet() — Method in class DelegatesToResource

Set the value for a given offset.

DelegatesToResource::offsetUnset() — Method in class DelegatesToResource

Unset the value for a given offset.

$ ResponseTrait#originalProperty in class ResponseTrait

The original content of the response.

Mailer::onQueue() — Method in class Mailer

Queue a new e-mail message for sending on the given queue.

$ SesTransport#optionsProperty in class SesTransport

The Amazon SES transmission options.

$ SesV2Transport#optionsProperty in class SesV2Transport

The Amazon SES transmission options.

$ SimpleMessage#outroLinesProperty in class SimpleMessage

The "outro" lines of the notification.

$ AbstractCursorPaginator#optionsProperty in class AbstractCursorPaginator

The paginator options.

AbstractCursorPaginator::offsetExists() — Method in class AbstractCursorPaginator

Determine if the given item exists.

AbstractCursorPaginator::offsetGet() — Method in class AbstractCursorPaginator

Get the item at the given offset.

AbstractCursorPaginator::offsetSet() — Method in class AbstractCursorPaginator

Set the item at the given offset.

AbstractCursorPaginator::offsetUnset() — Method in class AbstractCursorPaginator

Unset the item at the given key.

$ AbstractPaginator#onEachSideProperty in class AbstractPaginator

The number of links to display on each side of current page link.

$ AbstractPaginator#optionsProperty in class AbstractPaginator

The paginator options.

AbstractPaginator::onFirstPage() — Method in class AbstractPaginator

Determine if the paginator is on the first page.

AbstractPaginator::onLastPage() — Method in class AbstractPaginator

Determine if the paginator is on the last page.

AbstractPaginator::onEachSide() — Method in class AbstractPaginator

Set the number of links to display on each side of current page link.

AbstractPaginator::offsetExists() — Method in class AbstractPaginator

Determine if the given item exists.

AbstractPaginator::offsetGet() — Method in class AbstractPaginator

Get the item at the given offset.

AbstractPaginator::offsetSet() — Method in class AbstractPaginator

Set the item at the given offset.

AbstractPaginator::offsetUnset() — Method in class AbstractPaginator

Unset the item at the given key.

CursorPaginator::onFirstPage() — Method in class CursorPaginator

Determine if the paginator is on the first page.

CursorPaginator::onLastPage() — Method in class CursorPaginator

Determine if the paginator is on the last page.

$ FakeInvokedProcess#outputHandlerProperty in class FakeInvokedProcess

The general output handler callback.

FakeInvokedProcess::output() — Method in class FakeInvokedProcess

Get the standard output for the process.

$ FakeProcessDescription#outputProperty in class FakeProcessDescription

All of the process' output in the order it was described.

FakeProcessDescription::output() — Method in class FakeProcessDescription

Describe a line of standard output.

$ FakeProcessResult#outputProperty in class FakeProcessResult

The process output.

FakeProcessResult::output() — Method in class FakeProcessResult

Get the standard output of the process.

InvokedProcess::output() — Method in class InvokedProcess

Get the standard output for the process.

$ PendingProcess#optionsProperty in class PendingProcess

The options that will be passed to "proc_open".

PendingProcess::options() — Method in class PendingProcess

Set the "proc_open" options that should be used when invoking the process.

ProcessPoolResults::offsetExists() — Method in class ProcessPoolResults

Determine if the given array offset exists.

ProcessPoolResults::offsetGet() — Method in class ProcessPoolResults

Get the result at the given offset.

ProcessPoolResults::offsetSet() — Method in class ProcessPoolResults

Set the result at the given offset.

ProcessPoolResults::offsetUnset() — Method in class ProcessPoolResults

Unset the result at the given offset.

ProcessResult::output() — Method in class ProcessResult

Get the standard output of the process.

CallQueuedClosure::onFailure() — Method in class CallQueuedClosure

Add a callback to be executed if the job fails.

$ Listener#outputHandlerProperty in class Listener

The output handler callback.

$ ControllerMiddlewareOptions#optionsProperty in class ControllerMiddlewareOptions

The middleware options.

ControllerMiddlewareOptions::only() — Method in class ControllerMiddlewareOptions

Set the controller methods the middleware should apply to.

$ Middleware#onlyProperty in class Middleware

The controller methods the middleware should only apply to.

Middleware::only() — Method in class Middleware

Specify the only controller methods the middleware should apply to.

$ StreamedResponseException#originalExceptionProperty in class StreamedResponseException

The actual exception thrown during the stream.

$ PendingResourceRegistration#optionsProperty in class PendingResourceRegistration

The resource options.

PendingResourceRegistration::only() — Method in class PendingResourceRegistration

Set the methods the controller should apply to.

$ PendingSingletonResourceRegistration#optionsProperty in class PendingSingletonResourceRegistration

The resource options.

PendingSingletonResourceRegistration::only() — Method in class PendingSingletonResourceRegistration

Set the methods the controller should apply to.

$ Route#originalParametersProperty in class Route

The array of the matched parameters' original values.

Route::originalParameter() — Method in class Route

Get original value of a given parameter from the route.

Route::originalParameters() — Method in class Route

Get the key / value list of original parameters for the route.

RouteRegistrar::options() — Method in class RouteRegistrar
Router::options() — Method in class Router

Register a new OPTIONS route with the router.

ArraySessionHandler::open() — Method in class ArraySessionHandler
{@inheritdoc}
CacheBasedSessionHandler::open() — Method in class CacheBasedSessionHandler
{@inheritdoc}
CookieSessionHandler::open() — Method in class CookieSessionHandler
{@inheritdoc}
DatabaseSessionHandler::open() — Method in class DatabaseSessionHandler
{@inheritdoc}
FileSessionHandler::open() — Method in class FileSessionHandler
{@inheritdoc}
NullSessionHandler::open() — Method in class NullSessionHandler
{@inheritdoc}
Store::only() — Method in class Store

Get a subset of the session data.

Arr::only() — Method in class Arr

Get a subset of the items from the given array.

Collection::only() — Method in class Collection

Get the items with the specified keys.

Collection::offsetExists() — Method in class Collection

Determine if an item exists at an offset.

Collection::offsetGet() — Method in class Collection

Get an item at a given offset.

Collection::offsetSet() — Method in class Collection

Set the item at a given offset.

Collection::offsetUnset() — Method in class Collection

Unset the item at a given offset.

Enumerable::only() — Method in class Enumerable

Get the items with the specified keys.

Artisan::output() — Method in class Artisan
Auth::once() — Method in class Auth
Auth::onceUsingId() — Method in class Auth
Auth::onceBasic() — Method in class Auth
Mail::onQueue() — Method in class Mail
ParallelTesting::option() — Method in class ParallelTesting
Process::options() — Method in class Process
Request::overrideGlobals() — Method in class Request
Request::old() — Method in class Request
Request::only() — Method in class Request
Route::options() — Method in class Route
Session::only() — Method in class Session
Fluent::offsetExists() — Method in class Fluent

Determine if the given offset exists.

Fluent::offsetGet() — Method in class Fluent

Get the value for a given offset.

Fluent::offsetSet() — Method in class Fluent

Set the value at the given offset.

Fluent::offsetUnset() — Method in class Fluent

Unset the value at the given offset.

LazyCollection::only() — Method in class LazyCollection

Get the items with the specified keys.

$ Lottery#outOfProperty in class Lottery

The number of potential opportunities to win.

Lottery::odds() — Method in class Lottery

Create a new Lottery instance.

OptionalClass in namespace Illuminate\Support
Optional::offsetExists() — Method in class Optional

Determine if an item exists at an offset.

Optional::offsetGet() — Method in class Optional

Get an item at a given offset.

Optional::offsetSet() — Method in class Optional

Set the item at a given offset.

Optional::offsetUnset() — Method in class Optional

Unset the item at a given offset.

Str::of() — Method in class Str

Get a new stringable object from the given string.

Str::orderedUuid() — Method in class Str

Generate a time-ordered UUID (version 4).

Stringable::offsetExists() — Method in class Stringable

Determine if the given offset exists.

Stringable::offsetGet() — Method in class Stringable

Get the value at the given offset.

Stringable::offsetSet() — Method in class Stringable

Set the value at the given offset.

Stringable::offsetUnset() — Method in class Stringable

Unset the value at the given offset.

EnumeratesValues::operatorForWhere() — Method in class EnumeratesValues

Get an operator checker callback.

ValidatedInput::only() — Method in class ValidatedInput

Get a subset containing the provided keys with values from the input data.

ValidatedInput::offsetExists() — Method in class ValidatedInput

Determine if an item exists at an offset.

ValidatedInput::offsetGet() — Method in class ValidatedInput

Get an item at a given offset.

ValidatedInput::offsetSet() — Method in class ValidatedInput

Set the item at a given offset.

ValidatedInput::offsetUnset() — Method in class ValidatedInput

Unset the item at a given offset.

AssertableJsonString::offsetExists() — Method in class AssertableJsonString

Determine whether an offset exists.

AssertableJsonString::offsetGet() — Method in class AssertableJsonString

Get the value at the given offset.

AssertableJsonString::offsetSet() — Method in class AssertableJsonString

Set the value at the given offset.

AssertableJsonString::offsetUnset() — Method in class AssertableJsonString

Unset the value at the given offset.

$ RunsInParallel#optionsProperty in class RunsInParallel

The original test runner options.

$ RunsInParallel#outputProperty in class RunsInParallel

The output instance.

$ ParallelConsoleOutput#outputProperty in class ParallelConsoleOutput

The original output instance.

$ ParallelTesting#optionsResolverProperty in class ParallelTesting

The options resolver callback.

ParallelTesting::option() — Method in class ParallelTesting

Get a parallel testing option.

TestResponse::offsetExists() — Method in class TestResponse

Determine if the given offset exists.

TestResponse::offsetGet() — Method in class TestResponse

Get the value for a given offset.

TestResponse::offsetSet() — Method in class TestResponse

Set the value at the given offset.

TestResponse::offsetUnset() — Method in class TestResponse

Unset the value at the given offset.

PotentiallyTranslatedString::original() — Method in class PotentiallyTranslatedString

Get the original string.

DatabaseRule::onlyTrashed() — Method in class DatabaseRule

Only include soft deleted models during the existence check.

ComponentAttributeBag::only() — Method in class ComponentAttributeBag

Only include the given attribute from the attribute array.

ComponentAttributeBag::onlyProps() — Method in class ComponentAttributeBag

Only include the given attribute from the attribute array.

ComponentAttributeBag::offsetExists() — Method in class ComponentAttributeBag

Determine if the given offset exists.

ComponentAttributeBag::offsetGet() — Method in class ComponentAttributeBag

Get the value at the given offset.

ComponentAttributeBag::offsetSet() — Method in class ComponentAttributeBag

Set the value at a given offset.

ComponentAttributeBag::offsetUnset() — Method in class ComponentAttributeBag

Remove the value at the given offset.

View::offsetExists() — Method in class View

Determine if a piece of data is bound.

View::offsetGet() — Method in class View

Get a piece of bound data to the view.

View::offsetSet() — Method in class View

Set a piece of data on the view.

View::offsetUnset() — Method in class View

Unset a piece of data from the view.

P

$ Gate#policiesProperty in class Gate

All of the defined policies.

Gate::policy() — Method in class Gate

Define a policy class for a given class type.

Gate::parameterAllowsGuests() — Method in class Gate

Determine if the given parameter allows guests.

Gate::policies() — Method in class Gate

Get all of the defined policies.

AuthManager::provider() — Method in class AuthManager

Register a custom provider creator Closure.

PasswordResetClass in namespace Illuminate\Auth\Events
$ GuardHelpers#providerProperty in class GuardHelpers

The user provider implementation.

$ RequirePassword#passwordTimeoutProperty in class RequirePassword

The password timeout.

PasswordBrokerClass in namespace Illuminate\Auth\Passwords
PasswordBrokerManagerClass in namespace Illuminate\Auth\Passwords
PasswordResetServiceProviderClass in namespace Illuminate\Auth\Passwords
PasswordResetServiceProvider::provides() — Method in class PasswordResetServiceProvider

Get the services provided by the provider.

Recaller::properString() — Method in class Recaller

Determine if the recaller is an invalid string.

BroadcastManager::pusher() — Method in class BroadcastManager

Get a Pusher instance for the given configuration.

BroadcastManager::purge() — Method in class BroadcastManager

Disconnect the given disk and remove from local cache.

BroadcastServiceProvider::provides() — Method in class BroadcastServiceProvider

Get the services provided by the provider.

PusherBroadcasterClass in namespace Illuminate\Broadcasting\Broadcasters
$ PusherBroadcaster#pusherProperty in class PusherBroadcaster

The Pusher SDK instance.

$ RedisBroadcaster#prefixProperty in class RedisBroadcaster

The Redis key prefix.

PendingBroadcastClass in namespace Illuminate\Broadcasting
PresenceChannelClass in namespace Illuminate\Broadcasting
PrivateChannelClass in namespace Illuminate\Broadcasting
$ Batch#pendingJobsProperty in class Batch

The total number of jobs that are still pending.

Batch::prepareBatchedChain() — Method in class Batch

Prepare a chain that exists within the jobs being added.

Batch::processedJobs() — Method in class Batch

Get the total number of jobs that have been processed by the batch thus far.

Batch::progress() — Method in class Batch

Get the percentage of jobs that have been processed (between 0-100).

BusServiceProvider::provides() — Method in class BusServiceProvider

Get the services provided by the provider.

DatabaseBatchRepository::prune() — Method in class DatabaseBatchRepository

Prune all of the entries older than the given date.

DatabaseBatchRepository::pruneUnfinished() — Method in class DatabaseBatchRepository

Prune all of the unfinished entries older than the given date.

DatabaseBatchRepository::pruneCancelled() — Method in class DatabaseBatchRepository

Prune all of the cancelled entries older than the given date.

$ Dispatcher#pipelineProperty in class Dispatcher

The pipeline instance for the bus.

$ Dispatcher#pipesProperty in class Dispatcher

The pipes to send commands through before dispatching.

Dispatcher::pushCommandToQueue() — Method in class Dispatcher

Push the command onto the given queue instance.

Dispatcher::pipeThrough() — Method in class Dispatcher

Set the pipes through which commands should be piped before dispatching.

PendingBatchClass in namespace Illuminate\Bus
PrunableBatchRepositoryClass in namespace Illuminate\Bus
PrunableBatchRepository::prune() — Method in class PrunableBatchRepository

Prune all of the entries older than the given date.

Queueable::prependToChain() — Method in class Queueable

Prepend a job to the current chain so that it is run after the currently running job.

$ UpdatedBatchJobCounts#pendingJobsProperty in class UpdatedBatchJobCounts

The number of pending jobs remaining for the batch.

$ ApcStore#prefixProperty in class ApcStore

A string that should be prepended to keys.

ApcStore::put() — Method in class ApcStore

Store an item in the cache for a given number of seconds.

ApcWrapper::put() — Method in class ApcWrapper

Store an item in the cache.

ArrayStore::put() — Method in class ArrayStore

Store an item in the cache for a given number of seconds.

CacheManager::purge() — Method in class CacheManager

Disconnect the given driver and remove from local cache.

CacheServiceProvider::provides() — Method in class CacheServiceProvider

Get the services provided by the provider.

PruneStaleTagsCommandClass in namespace Illuminate\Cache\Console
$ DatabaseStore#prefixProperty in class DatabaseStore

A string that should be prepended to keys.

DatabaseStore::put() — Method in class DatabaseStore

Store an item in the cache for a given number of seconds.

$ DynamoDbStore#prefixProperty in class DynamoDbStore

A string that should be prepended to keys.

DynamoDbStore::put() — Method in class DynamoDbStore

Store an item in the cache for a given number of seconds.

DynamoDbStore::putMany() — Method in class DynamoDbStore

Store multiple items in the cache for a given number of seconds.

FileStore::put() — Method in class FileStore

Store an item in the cache for a given number of seconds.

FileStore::path() — Method in class FileStore

Get the full path for the given cache key.

$ MemcachedStore#prefixProperty in class MemcachedStore

A string that should be prepended to keys.

MemcachedStore::put() — Method in class MemcachedStore

Store an item in the cache for a given number of seconds.

MemcachedStore::putMany() — Method in class MemcachedStore

Store multiple items in the cache for a given number of seconds.

NullStore::put() — Method in class NullStore

Store an item in the cache for a given number of seconds.

PhpRedisLockClass in namespace Illuminate\Cache
Limit::perMinute() — Method in class Limit

Create a new rate limit.

Limit::perMinutes() — Method in class Limit

Create a new rate limit using minutes as decay time.

Limit::perHour() — Method in class Limit

Create a new rate limit using hours as decay time.

Limit::perDay() — Method in class Limit

Create a new rate limit using days as decay time.

$ RedisStore#prefixProperty in class RedisStore

A string that should be prepended to keys.

RedisStore::put() — Method in class RedisStore

Store an item in the cache for a given number of seconds.

RedisStore::putMany() — Method in class RedisStore

Store multiple items in the cache for a given number of seconds.

RedisTaggedCache::put() — Method in class RedisTaggedCache

Store an item in the cache.

Repository::pull() — Method in class Repository
Repository::put() — Method in class Repository

Store an item in the cache.

Repository::putMany() — Method in class Repository

Store multiple items in the cache for a given number of seconds.

Repository::putManyForever() — Method in class Repository

Store multiple items in the cache indefinitely.

RetrievesMultipleKeys::putMany() — Method in class RetrievesMultipleKeys

Store multiple items in the cache for a given number of seconds.

TaggedCache::putMany() — Method in class TaggedCache

Store multiple items in the cache for a given number of seconds.

Repository::prepend() — Method in class Repository

Prepend a value onto an array configuration value.

Repository::push() — Method in class Repository

Push a value onto an array configuration value.

Application::phpBinary() — Method in class Application

Determine the proper PHP executable.

Application::parseCommand() — Method in class Application

Parse the incoming Artisan command and its input.

InteractsWithIO::parseVerbosity() — Method in class InteractsWithIO

Get the verbosity level in terms of Symfony's OutputInterface level.

PromptsForMissingInputClass in namespace Illuminate\Console\Concerns
PromptsForMissingInput::promptForMissingArguments() — Method in class PromptsForMissingInput

Prompt the user for any missing arguments.

PromptsForMissingInput::promptForMissingArgumentsUsing() — Method in class PromptsForMissingInput

Prompt for missing input arguments using the returned questions.

GeneratorCommand::possibleModels() — Method in class GeneratorCommand

Get a list of possible model names.

GeneratorCommand::possibleEvents() — Method in class GeneratorCommand

Get a list of possible event names.

GeneratorCommand::promptForMissingArgumentsUsing() — Method in class GeneratorCommand

Prompt for missing input arguments using the returned questions.

ParserClass in namespace Illuminate\Console
Parser::parse() — Method in class Parser

Parse the given console command definition into an array.

Parser::parameters() — Method in class Parser

Extract all of the parameters from the tokens.

Parser::parseArgument() — Method in class Parser

Parse an argument expression.

Parser::parseOption() — Method in class Parser

Parse an option expression.

$ CallbackEvent#parametersProperty in class CallbackEvent

The parameters to pass to the method.

Event::pingBefore() — Method in class Event

Register a callback to ping a given URL before the job runs.

Event::pingBeforeIf() — Method in class Event

Register a callback to ping a given URL before the job runs if the given condition is true.

Event::pingOnSuccess() — Method in class Event

Register a callback to ping a given URL if the operation succeeds.

Event::pingOnFailure() — Method in class Event

Register a callback to ping a given URL if the operation fails.

Event::pingCallback() — Method in class Event

Get the callback that pings the given URL.

Event::preventOverlapsUsing() — Method in class Event

Set the event mutex implementation to be used.

$ ScheduleRunCommand#phpBinaryProperty in class ScheduleRunCommand

The PHP binary used by the command.

$ Signals#previousHandlersProperty in class Signals

The signal registry's previous list of handlers.

Container::parseBindMethod() — Method in class Container

Get the method to be bound in [email protected] format.

Gate::policy() — Method in class Gate

Define a policy class for a given class type.

PasswordBrokerClass in namespace Illuminate\Contracts\Auth
PasswordBrokerFactoryClass in namespace Illuminate\Contracts\Auth
Dispatcher::pipeThrough() — Method in class Dispatcher

Set the pipes commands should be piped through before dispatching.

Repository::pull() — Method in class Repository
Repository::put() — Method in class Repository

Store an item in the cache.

Store::put() — Method in class Store

Store an item in the cache for a given number of seconds.

Store::putMany() — Method in class Store

Store multiple items in the cache for a given number of seconds.

Repository::prepend() — Method in class Repository

Prepend a value onto an array configuration value.

Repository::push() — Method in class Repository

Push a value onto an array configuration value.

PromptsForMissingInputClass in namespace Illuminate\Contracts\Console
Dispatcher::push() — Method in class Dispatcher

Register an event and payload to be fired later.

Filesystem::put() — Method in class Filesystem

Write the contents of a file.

Filesystem::prepend() — Method in class Filesystem

Prepend to a file.

Application::publicPath() — Method in class Application

Get the path to the public directory.

CursorPaginator::previousPageUrl() — Method in class CursorPaginator

Get the URL for the previous page, or null.

CursorPaginator::previousCursor() — Method in class CursorPaginator

Get the "cursor" of the previous set of items.

CursorPaginator::perPage() — Method in class CursorPaginator

Determine how many items are being shown per page.

CursorPaginator::path() — Method in class CursorPaginator

Get the base path for paginator generated URLs.

PaginatorClass in namespace Illuminate\Contracts\Pagination
Paginator::previousPageUrl() — Method in class Paginator

Get the URL for the previous page, or null.

Paginator::perPage() — Method in class Paginator

Determine how many items are being shown per page.

Paginator::path() — Method in class Paginator

Get the base path for paginator generated URLs.

Hub::pipe() — Method in class Hub

Send an object through one of the available pipelines.

PipelineClass in namespace Illuminate\Contracts\Pipeline
ProcessResultClass in namespace Illuminate\Contracts\Process
Job::payload() — Method in class Job

Get the decoded body of the job.

Queue::push() — Method in class Queue

Push a new job onto the queue.

Queue::pushOn() — Method in class Queue

Push a new job onto the queue.

Queue::pushRaw() — Method in class Queue

Push a raw payload onto the queue.

Queue::pop() — Method in class Queue

Pop the next job off of the queue.

Connection::psubscribe() — Method in class Connection

Subscribe to a set of given channels with wildcards.

Registrar::post() — Method in class Registrar

Register a new POST route with the router.

Registrar::put() — Method in class Registrar

Register a new PUT route with the router.

Registrar::patch() — Method in class Registrar

Register a new PATCH route with the router.

UrlGenerator::previous() — Method in class UrlGenerator

Get the URL for the previous request.

Session::pull() — Method in class Session

Get the value of a given key and then forget it.

Session::put() — Method in class Session

Put a key / value pair or array of key / value pairs in the session.

Session::previousUrl() — Method in class Session

Get the previous URL from the session.

DeferrableProvider::provides() — Method in class DeferrableProvider

Get the services provided by the provider.

HasLocalePreference::preferredLocale() — Method in class HasLocalePreference

Get the preferred locale of the entity.

Rule::passes() — Method in class Rule

Determine if the validation rule passes.

$ CookieJar#pathProperty in class CookieJar

The default path (if specified).

BuildsQueries::paginateUsingCursor() — Method in class BuildsQueries

Paginate the given query using a cursor paginator.

BuildsQueries::paginator() — Method in class BuildsQueries

Create a new length-aware paginator instance.

ManagesTransactions::performRollBack() — Method in class ManagesTransactions

Perform a rollback within the database.

ParsesSearchPathClass in namespace Illuminate\Database\Concerns
ParsesSearchPath::parseSearchPath() — Method in class ParsesSearchPath

Parse the Postgres "search_path" configuration value into an array.

$ Connection#pdoProperty in class Connection

The active PDO connection.

$ Connection#postProcessorProperty in class Connection

The query post processor implementation.

$ Connection#pretendingProperty in class Connection

Indicates if the connection is in a "dry run".

Connection::prepared() — Method in class Connection

Configure the PDO prepared statement.

Connection::pretend() — Method in class Connection

Execute the given callback in "dry run" mode.

Connection::prepareBindings() — Method in class Connection

Prepare the query bindings for execution.

Connection::pretending() — Method in class Connection

Determine if the connection is in a "dry run".

ConnectionInterface::prepareBindings() — Method in class ConnectionInterface

Prepare the query bindings for execution.

ConnectionInterface::pretend() — Method in class ConnectionInterface

Execute the given callback in "dry run" mode.

ConnectionFactory::parseConfig() — Method in class ConnectionFactory

Parse and prepare the database configuration.

ConnectionFactory::parseHosts() — Method in class ConnectionFactory

Parse the hosts configuration item into an array.

PostgresConnectorClass in namespace Illuminate\Database\Connectors
SqlServerConnector::prefersOdbc() — Method in class SqlServerConnector

Determine if the database configuration prefers ODBC.

DumpCommand::path() — Method in class DumpCommand

Get the path that the dump should be written to.

MigrateCommand::prepareDatabase() — Method in class MigrateCommand

Prepare the migration database for running.

MigrateMakeCommand::promptForMissingArgumentsUsing() — Method in class MigrateMakeCommand

Prompt for missing input arguments using the returned questions.

MonitorCommand::parseDatabases() — Method in class MonitorCommand

Parse the database into an array of the connections.

PruneCommandClass in namespace Illuminate\Database\Console
PruneCommand::pruneModel() — Method in class PruneCommand

Prune the given model.

PruneCommand::pretendToPrune() — Method in class PruneCommand

Display how many models will be pruned.

DatabaseManager::parseConnectionName() — Method in class DatabaseManager

Parse the connection into an array of the name and read / write type.

DatabaseManager::purge() — Method in class DatabaseManager

Disconnect from the given database and remove from local cache.

$ Builder#propertyPassthruProperty in class Builder

The properties that should be returned from query builder.

$ Builder#passthruProperty in class Builder

The methods that should be returned from query builder.

Builder::pluck() — Method in class Builder

Get a collection with the values of a given column.

Builder::paginate() — Method in class Builder

Paginate the given query.

Builder::parseWithRelations() — Method in class Builder

Parse a list of relations into individuals.

Builder::prepareNestedWithRelationships() — Method in class Builder

Prepare nested with relationships.

Builder::parseNameAndAttributeSelectionConstraint() — Method in class Builder

Parse the attribute select constraints from the name.

Collection::pad() — Method in class Collection

Pad collection to the specified length with a value.

Collection::pluck() — Method in class Collection

Get an array with the values of a given key.

$ HasAttributes#primitiveCastTypesProperty in class HasAttributes

The built-in, primitive cast types supported by Eloquent.

HasAttributes::parseCasterClass() — Method in class HasAttributes

Parse the given caster class, removing any arguments.

$ BelongsToManyRelationship#pivotProperty in class BelongsToManyRelationship

The pivot attributes / attribute resolver.

Factory::parentResolvers() — Method in class Factory

Create the parent relationship resolvers (as deferred Closures).

MassPrunable::pruneAll() — Method in class MassPrunable

Prune all prunable models in the database.

MassPrunable::prunable() — Method in class MassPrunable

Get the prunable model query.

$ Model#primaryKeyProperty in class Model

The primary key for the model.

$ Model#preventsLazyLoadingProperty in class Model

Indicates whether lazy loading will be prevented on this model.

$ Model#perPageProperty in class Model

The number of models to return for pagination.

Model::preventLazyLoading() — Method in class Model

Prevent model relationships from being lazy loaded.

Model::preventSilentlyDiscardingAttributes() — Method in class Model

Prevent non-fillable attributes from being silently discarded.

Model::preventAccessingMissingAttributes() — Method in class Model

Prevent accessing missing attributes on retrieved models.

Model::push() — Method in class Model

Save the model and all of its relationships.

Model::pushQuietly() — Method in class Model

Save the model and all of its relationships without raising any events to the parent model.

Model::performUpdate() — Method in class Model

Perform a model update operation.

Model::performInsert() — Method in class Model

Perform a model insert operation.

Model::performDeleteOnModel() — Method in class Model

Perform the actual delete query on this model instance.

Model::preventsLazyLoading() — Method in class Model

Determine if lazy loading is disabled.

Model::preventsSilentlyDiscardingAttributes() — Method in class Model

Determine if discarding guarded attribute fills is disabled.

Model::preventsAccessingMissingAttributes() — Method in class Model

Determine if accessing missing attributes is disabled.

PendingHasThroughRelationshipClass in namespace Illuminate\Database\Eloquent
PrunableClass in namespace Illuminate\Database\Eloquent
Prunable::pruneAll() — Method in class Prunable

Prune all prunable models in the database.

Prunable::prunable() — Method in class Prunable

Get the prunable model query.

Prunable::prune() — Method in class Prunable

Prune the model in the database.

Prunable::pruning() — Method in class Prunable

Prepare the model for pruning.

$ BelongsToMany#parentKeyProperty in class BelongsToMany

The key name of the parent model.

$ BelongsToMany#pivotColumnsProperty in class BelongsToMany

The pivot table columns to retrieve.

$ BelongsToMany#pivotWheresProperty in class BelongsToMany

Any pivot table restrictions for where clauses.

$ BelongsToMany#pivotWhereInsProperty in class BelongsToMany

Any pivot table restrictions for whereIn clauses.

$ BelongsToMany#pivotWhereNullsProperty in class BelongsToMany

Any pivot table restrictions for whereNull clauses.

$ BelongsToMany#pivotValuesProperty in class BelongsToMany

The default values for the pivot columns.

$ BelongsToMany#pivotCreatedAtProperty in class BelongsToMany

The custom pivot table column for the created_at timestamp.

$ BelongsToMany#pivotUpdatedAtProperty in class BelongsToMany

The custom pivot table column for the updated_at timestamp.

BelongsToMany::performJoin() — Method in class BelongsToMany

Set the join clause for the relation query.

BelongsToMany::paginate() — Method in class BelongsToMany

Get a paginator for the "select" statement.

BelongsToMany::prepareQueryBuilder() — Method in class BelongsToMany

Prepare the query builder for query execution.

$ AsPivot#pivotParentProperty in class AsPivot

The parent model of the relationship.

InteractsWithPivotTable::parseIds() — Method in class InteractsWithPivotTable

Get all of the IDs from the given mixed value.

InteractsWithPivotTable::parseId() — Method in class InteractsWithPivotTable

Get the ID from the given mixed value.

HasManyThrough::performJoin() — Method in class HasManyThrough

Set the join clause on the query.

HasManyThrough::paginate() — Method in class HasManyThrough

Get a paginator for the "select" statement.

HasManyThrough::prepareQueryBuilder() — Method in class HasManyThrough

Prepare the query builder for query execution.

PivotClass in namespace Illuminate\Database\Eloquent\Relations
$ Relation#parentProperty in class Relation

The parent model instance.

SoftDeletes::performDeleteOnModel() — Method in class SoftDeletes

Perform the actual delete query on this model instance.

$ SchemaDumped#pathProperty in class SchemaDumped

The path to the schema dump.

$ SchemaLoaded#pathProperty in class SchemaLoaded

The path to the schema dump.

Grammar::parameterize() — Method in class Grammar

Create query parameter place-holders for an array.

Grammar::parameter() — Method in class Grammar

Get the appropriate query parameter place-holder for a value.

MigrationServiceProvider::provides() — Method in class MigrationServiceProvider

Get the services provided by the provider.

$ MigrationCreator#postCreateProperty in class MigrationCreator

The registered post create hooks.

MigrationCreator::populateStub() — Method in class MigrationCreator

Populate the place-holders in the migration stub.

$ Migrator#pathsProperty in class Migrator

The paths to all of the migration files.

Migrator::pendingMigrations() — Method in class Migrator

Get the migration files that have not yet run.

Migrator::pretendToRun() — Method in class Migrator

Pretend to run the migrations.

Migrator::path() — Method in class Migrator

Register a custom migration path.

Migrator::paths() — Method in class Migrator

Get all of the custom migration paths.

Connection::prepare() — Method in class Connection

Prepare a new SQL statement.

PostgresDriverClass in namespace Illuminate\Database\PDO
SqlServerConnection::prepare() — Method in class SqlServerConnection

Prepare a new SQL statement.

PostgresConnectionClass in namespace Illuminate\Database
$ Builder#processorProperty in class Builder

The database query post processor instance.

Builder::parseSub() — Method in class Builder

Parse the subquery into SQL and bindings.

Builder::prependDatabaseNameIfCrossDatabaseQuery() — Method in class Builder

Prepend the database name if the given query is on another database.

Builder::prepareValueAndOperator() — Method in class Builder

Prepare the value and operator for a where clause.

Builder::paginate() — Method in class Builder

Paginate the given query into a simple paginator.

Builder::pluck() — Method in class Builder

Get a collection instance containing the values of a given column.

Builder::pluckFromObjectColumn() — Method in class Builder

Retrieve column values from rows represented as objects.

Builder::pluckFromArrayColumn() — Method in class Builder

Retrieve column values from rows represented as arrays.

Grammar::prepareBindingForJsonContains() — Method in class Grammar

Prepare the binding for a "JSON contains" statement.

Grammar::prepareBindingsForUpdate() — Method in class Grammar

Prepare the bindings for an update statement.

Grammar::prepareBindingsForDelete() — Method in class Grammar

Prepare the bindings for a delete statement.

MySqlGrammar::prepareBindingsForUpdate() — Method in class MySqlGrammar

Prepare the bindings for an update statement.

PostgresGrammarClass in namespace Illuminate\Database\Query\Grammars
PostgresGrammar::prepareBindingsForUpdateFrom() — Method in class PostgresGrammar

Prepare the bindings for an update statement.

PostgresGrammar::prepareBindingsForUpdate() — Method in class PostgresGrammar

Prepare the bindings for an update statement.

PostgresGrammar::parseJsonPathArrayKeys() — Method in class PostgresGrammar

Parse the given JSON path attribute for array keys.

SQLiteGrammar::prepareBindingsForUpdate() — Method in class SQLiteGrammar

Prepare the bindings for an update statement.

SqlServerGrammar::prepareBindingForJsonContains() — Method in class SqlServerGrammar

Prepare the binding for a "JSON contains" statement.

SqlServerGrammar::prepareBindingsForUpdate() — Method in class SqlServerGrammar

Prepare the bindings for an update statement.

$ JoinClause#parentConnectionProperty in class JoinClause

The connection of the parent query builder.

$ JoinClause#parentGrammarProperty in class JoinClause

The grammar of the parent query builder.

$ JoinClause#parentProcessorProperty in class JoinClause

The processor of the parent query builder.

$ JoinClause#parentClassProperty in class JoinClause

The class name of the parent query builder.

MySqlProcessor::processColumnListing() — Method in class MySqlProcessor

Process the results of a column listing query.

PostgresProcessorClass in namespace Illuminate\Database\Query\Processors
PostgresProcessor::processInsertGetId() — Method in class PostgresProcessor

Process an "insert get ID" query.

PostgresProcessor::processColumnListing() — Method in class PostgresProcessor

Process the results of a column listing query.

ProcessorClass in namespace Illuminate\Database\Query\Processors
Processor::processSelect() — Method in class Processor

Process the results of a "select" query.

Processor::processInsertGetId() — Method in class Processor

Process an "insert get ID" query.

Processor::processColumnListing() — Method in class Processor

Process the results of a column listing query.

SQLiteProcessor::processColumnListing() — Method in class SQLiteProcessor

Process the results of a column listing query.

SqlServerProcessor::processInsertGetId() — Method in class SqlServerProcessor

Process an "insert get ID" query.

SqlServerProcessor::processInsertGetIdForOdbc() — Method in class SqlServerProcessor

Process an "insert get ID" query for ODBC.

SqlServerProcessor::processColumnListing() — Method in class SqlServerProcessor

Process the results of a column listing query.

$ SQLiteDatabaseDoesNotExistException#pathProperty in class SQLiteDatabaseDoesNotExistException

The path to the database.

$ Blueprint#prefixProperty in class Blueprint

The prefix of the table.

Blueprint::primary() — Method in class Blueprint

Specify the primary key(s) for the table.

Blueprint::point() — Method in class Blueprint

Create a new point column on the table.

Blueprint::polygon() — Method in class Blueprint

Create a new polygon column on the table.

ColumnDefinition::persisted() — Method in class ColumnDefinition
ColumnDefinition::primary() — Method in class ColumnDefinition

Add a primary index

Grammar::prefixArray() — Method in class Grammar

Add a prefix to an array of values.

PostgresGrammarClass in namespace Illuminate\Database\Schema\Grammars
PostgresBuilderClass in namespace Illuminate\Database\Schema
PostgresBuilder::parseSchemaAndTable() — Method in class PostgresBuilder

Parse the database object reference and extract the database, schema, and table.

PostgresBuilder::parseSearchPath() — Method in class PostgresBuilder

Parse the "search_path" configuration value into an array.

PostgresSchemaStateClass in namespace Illuminate\Database\Schema
$ SchemaState#processFactoryProperty in class SchemaState

The process factory callback.

EncryptionServiceProvider::parseKey() — Method in class EncryptionServiceProvider

Parse the encryption key.

CallQueuedListener::prepareData() — Method in class CallQueuedListener

Unserialize the data if needed.

Dispatcher::push() — Method in class Dispatcher

Register an event and payload to be fired later.

Dispatcher::parseEventAndPayload() — Method in class Dispatcher

Parse the given event and payload and prepare them for dispatching.

Dispatcher::prepareListeners() — Method in class Dispatcher

Prepare the listeners for a given event.

Dispatcher::parseClassCallable() — Method in class Dispatcher

Parse the class listener into class and method.

Dispatcher::propagateListenerOptions() — Method in class Dispatcher

Propagate listener options to the job.

NullDispatcher::push() — Method in class NullDispatcher

Don't register an event and payload to be fired later.

AwsS3V3Adapter::providesTemporaryUrls() — Method in class AwsS3V3Adapter

Determine if temporary URLs can be generated.

Filesystem::put() — Method in class Filesystem

Write the contents of a file.

Filesystem::prepend() — Method in class Filesystem

Prepend to a file.

$ FilesystemAdapter#prefixerProperty in class FilesystemAdapter

The Flysystem PathPrefixer instance.

FilesystemAdapter::path() — Method in class FilesystemAdapter

Get the full path for the file at the given "short" path.

FilesystemAdapter::put() — Method in class FilesystemAdapter

Write the contents of a file.

FilesystemAdapter::putFile() — Method in class FilesystemAdapter

Store the uploaded file on the disk.

FilesystemAdapter::putFileAs() — Method in class FilesystemAdapter

Store the uploaded file on the disk with a given name.

FilesystemAdapter::prepend() — Method in class FilesystemAdapter

Prepend to a file.

FilesystemAdapter::providesTemporaryUrls() — Method in class FilesystemAdapter

Determine if temporary URLs can be generated.

FilesystemAdapter::parseVisibility() — Method in class FilesystemAdapter

Parse the given visibility value.

FilesystemManager::purge() — Method in class FilesystemManager

Disconnect the given disk and remove from local cache.

$ LockableFile#pathProperty in class LockableFile

The file path.

AliasLoader::prependToLoaderStack() — Method in class AliasLoader

Prepend the load method to the auto-loader stack.

$ Application#publicPathProperty in class Application

The custom public / web path defined by the developer.

Application::path() — Method in class Application

Get the path to the application "app" directory.

Application::publicPath() — Method in class Application

Get the path to the public / web directory.

Application::providerIsLoaded() — Method in class Application

Determine if the given service provider is loaded.

Application::provideFacades() — Method in class Application

Configure the real-time facade namespace.

AuthorizesRequests::parseAbilityAndArguments() — Method in class AuthorizesRequests

Guesses the ability's name if it wasn't provided.

PendingChainClass in namespace Illuminate\Foundation\Bus
PendingClosureDispatchClass in namespace Illuminate\Foundation\Bus
PendingDispatchClass in namespace Illuminate\Foundation\Bus
ComposerScripts::postInstall() — Method in class ComposerScripts

Handle the post-install Composer event.

ComposerScripts::postUpdate() — Method in class ComposerScripts

Handle the post-update Composer event.

ComposerScripts::postAutoloadDump() — Method in class ComposerScripts

Handle the post-autoload-dump Composer event.

ClosureCommand::purpose() — Method in class ClosureCommand

Set the description for the command.

DocsCommand::page() — Method in class DocsCommand

The page the user is opening.

DocsCommand::pages() — Method in class DocsCommand

The pages available to open.

DownCommand::prerenderView() — Method in class DownCommand

Prerender the specified view so that it can be rendered even before loading Composer.

EnvironmentDecryptCommand::parseKey() — Method in class EnvironmentDecryptCommand

Parse the encryption key.

EnvironmentEncryptCommand::parseKey() — Method in class EnvironmentEncryptCommand

Parse the encryption key.

ObserverMakeCommand::parseModel() — Method in class ObserverMakeCommand

Get the fully-qualified model class name.

PackageDiscoverCommandClass in namespace Illuminate\Foundation\Console
PolicyMakeCommandClass in namespace Illuminate\Foundation\Console
ProviderMakeCommandClass in namespace Illuminate\Foundation\Console
RouteListCommand::pluckColumns() — Method in class RouteListCommand

Remove unnecessary columns from the routes.

RouteListCommand::parseColumns() — Method in class RouteListCommand

Parse the column list.

$ ServeCommand#portOffsetProperty in class ServeCommand

The current port offset.

$ ServeCommand#passthroughVariablesProperty in class ServeCommand

The environment variables that should be passed from host machine to the PHP server process.

ServeCommand::port() — Method in class ServeCommand

Get the port for the command.

$ VendorPublishCommand#providerProperty in class VendorPublishCommand

The provider to publish.

VendorPublishCommand::promptForProviderOrTag() — Method in class VendorPublishCommand

Prompt for which provider or tag to publish.

VendorPublishCommand::publishableChoices() — Method in class VendorPublishCommand

The choices available via the prompt.

VendorPublishCommand::parseChoice() — Method in class VendorPublishCommand

Parse the answer that was given via the prompt.

VendorPublishCommand::publishTag() — Method in class VendorPublishCommand

Publishes the assets for a tag.

VendorPublishCommand::pathsToPublish() — Method in class VendorPublishCommand

Get all of the paths to publish.

VendorPublishCommand::publishItem() — Method in class VendorPublishCommand

Publish the given item from and to the given location.

VendorPublishCommand::publishFile() — Method in class VendorPublishCommand

Publish the file to the given path.

VendorPublishCommand::publishDirectory() — Method in class VendorPublishCommand

Publish the directory to the given directory.

ViewCacheCommand::paths() — Method in class ViewCacheCommand

Get all of the possible view paths.

PublishingStubsClass in namespace Illuminate\Foundation\Events
$ VendorTagPublished#pathsProperty in class VendorTagPublished

The publishable paths registered by the tag.

Handler::prepareException() — Method in class Handler

Prepare exception for rendering.

Handler::prepareResponse() — Method in class Handler

Prepare a response for the given exception.

Handler::prepareJsonResponse() — Method in class Handler

Prepare a JSON response for the given exception.

FileBasedMaintenanceMode::path() — Method in class FileBasedMaintenanceMode

Get the path where the file is stored that signals that the application is down for maintenance.

FormRequest::passesAuthorization() — Method in class FormRequest

Determine if the request passes the authorization check.

Kernel::parseMiddleware() — Method in class Kernel

Parse a middleware string to get the name and parameters.

Kernel::prependMiddleware() — Method in class Kernel

Add a new middleware to the beginning of the stack if it does not already exist.

Kernel::pushMiddleware() — Method in class Kernel

Add a new middleware to end of the stack if it does not already exist.

Kernel::prependMiddlewareToGroup() — Method in class Kernel

Prepend the given middleware to the given middleware group.

Kernel::prependToMiddlewarePriority() — Method in class Kernel

Prepend the given middleware to the middleware priority list.

HandlePrecognitiveRequests::prepareForPrecognition() — Method in class HandlePrecognitiveRequests

Prepare to handle a precognitive request.

PreventRequestsDuringMaintenanceClass in namespace Illuminate\Foundation\Http\Middleware
PackageManifestClass in namespace Illuminate\Foundation
PackageManifest::providers() — Method in class PackageManifest

Get all of the service provider class names for all packages.

PackageManifest::packagesToIgnore() — Method in class PackageManifest

Get all of the package names that should be ignored.

PrecognitionClass in namespace Illuminate\Foundation
ProviderRepositoryClass in namespace Illuminate\Foundation
ArtisanServiceProvider::provides() — Method in class ArtisanServiceProvider

Get the services provided by the provider.

ComposerServiceProvider::provides() — Method in class ComposerServiceProvider

Get the services provided by the provider.

$ ConsoleSupportServiceProvider#providersProperty in class ConsoleSupportServiceProvider

The provider class names.

$ FoundationServiceProvider#providersProperty in class FoundationServiceProvider

The provider class names.

PrecognitionCallableDispatcherClass in namespace Illuminate\Foundation\Routing
PrecognitionControllerDispatcherClass in namespace Illuminate\Foundation\Routing
$ AuthServiceProvider#policiesProperty in class AuthServiceProvider

The policy mappings for the application.

AuthServiceProvider::policies() — Method in class AuthServiceProvider

Get the policies defined on the provider.

InteractsWithContainer::partialMock() — Method in class InteractsWithContainer

Mock a partial instance of an object in the container.

InteractsWithContainer::preloadedAssets() — Method in class InteractsWithContainer
$ Vite#preloadTagAttributesResolversProperty in class Vite

The preload tag attributes resolvers.

$ Vite#preloadedAssetsProperty in class Vite

The preloaded assets.

Vite::preloadedAssets() — Method in class Vite

Get the preloaded assets.

Vite::parseAttributes() — Method in class Vite

Parse the attributes into key="value" strings.

HashServiceProvider::provides() — Method in class HashServiceProvider

Get the services provided by the provider.

DeterminesStatusCode::paymentRequired() — Method in class DeterminesStatusCode

Determine if the response was a 402 "Payment Required" response.

$ Factory#preventStrayRequestsProperty in class Factory

Indicates that an exception should be thrown if any request is not faked.

Factory::preventStrayRequests() — Method in class Factory

Indicate that an exception should be thrown if any request is not faked.

PendingRequestClass in namespace Illuminate\Http\Client
$ PendingRequest#pendingBodyProperty in class PendingRequest

The raw body for the request.

$ PendingRequest#pendingFilesProperty in class PendingRequest

The pending files for the request.

$ PendingRequest#preventStrayRequestsProperty in class PendingRequest

Indicates that an exception should be thrown if any request is not faked.

$ PendingRequest#promiseProperty in class PendingRequest

The pending request promise.

PendingRequest::post() — Method in class PendingRequest

Issue a POST request to the given URL.

PendingRequest::patch() — Method in class PendingRequest

Issue a PATCH request to the given URL.

PendingRequest::put() — Method in class PendingRequest

Issue a PUT request to the given URL.

PendingRequest::pool() — Method in class PendingRequest

Send a pool of asynchronous requests concurrently.

PendingRequest::parseHttpOptions() — Method in class PendingRequest

Parse the given HTTP options and set the appropriate additional options.

PendingRequest::parseMultipartBodyFormat() — Method in class PendingRequest

Parse multi-part form data.

PendingRequest::parseRequestData() — Method in class PendingRequest

Get the request data as an array so that we can attach it to the request for convenient assertions.

PendingRequest::populateResponse() — Method in class PendingRequest

Populate the given response with additional data.

PendingRequest::pushHandlers() — Method in class PendingRequest

Add the necessary handlers to the given handler stack.

PendingRequest::preventStrayRequests() — Method in class PendingRequest

Indicate that an exception should be thrown if any request is not faked.

PoolClass in namespace Illuminate\Http\Client
$ Pool#poolProperty in class Pool

The pool of requests.

Request::parameters() — Method in class Request

Get the request's form parameters.

RequestException::prepareMessage() — Method in class RequestException

Prepare the exception message.

ResponseSequence::push() — Method in class ResponseSequence

Push a response to the sequence.

ResponseSequence::pushStatus() — Method in class ResponseSequence

Push a response with the given status code to the sequence.

ResponseSequence::pushFile() — Method in class ResponseSequence

Push response with the contents of a file as the body to the sequence.

ResponseSequence::pushResponse() — Method in class ResponseSequence

Push a response to the sequence.

InteractsWithContentTypes::prefers() — Method in class InteractsWithContentTypes

Return the most suitable content type from the given array based on content negotiation.

InteractsWithInput::post() — Method in class InteractsWithInput

Retrieve a request payload item from the request.

PostTooLargeExceptionClass in namespace Illuminate\Http\Exceptions
FileHelpers::path() — Method in class FileHelpers

Get the fully qualified path to the file.

SetCacheHeaders::parseOptions() — Method in class SetCacheHeaders

Parse the given header options.

$ TrustProxies#proxiesProperty in class TrustProxies

The trusted proxies for the application.

TrustProxies::proxies() — Method in class TrustProxies

Get the trusted proxies.

RedirectResponse::parseErrors() — Method in class RedirectResponse

Parse the given errors into an appropriate value.

Request::path() — Method in class Request

Get the current path info for the request.

Request::pjax() — Method in class Request

Determine if the request is the result of a PJAX call.

Request::prefetch() — Method in class Request

Determine if the request is the result of a prefetch call.

$ AnonymousResourceCollection#preserveKeysProperty in class AnonymousResourceCollection

Indicates if the collection keys should be preserved.

PaginatedResourceResponseClass in namespace Illuminate\Http\Resources\Json
PaginatedResourceResponse::paginationInformation() — Method in class PaginatedResourceResponse

Add the pagination information to the response.

PaginatedResourceResponse::paginationLinks() — Method in class PaginatedResourceResponse

Get the pagination links for the response.

$ ResourceCollection#preserveAllQueryParametersProperty in class ResourceCollection

Indicates if all existing request query parameters should be added to pagination links.

ResourceCollection::preserveQuery() — Method in class ResourceCollection

Indicate that all current query parameters should be appended to pagination links.

ResourceCollection::preparePaginatedResponse() — Method in class ResourceCollection

Create a paginate-aware HTTP response.

PotentiallyMissingClass in namespace Illuminate\Http\Resources
UploadedFile::parseOptions() — Method in class UploadedFile

Parse and format the given options.

LogManager::parseTap() — Method in class LogManager

Parse the given tap class string into a class name and arguments string.

LogManager::prepareHandlers() — Method in class LogManager

Prepare the handlers for usage by Monolog.

LogManager::prepareHandler() — Method in class LogManager

Prepare the handler for usage by Monolog.

LogManager::parseDriver() — Method in class LogManager

Parse the driver name.

ParsesLogConfigurationClass in namespace Illuminate\Log
ParsesLogConfiguration::parseChannel() — Method in class ParsesLogConfiguration

Extract the log channel from the given configuration.

MailManager::purge() — Method in class MailManager

Disconnect the given mailer and remove from local cache.

MailServiceProvider::provides() — Method in class MailServiceProvider

Get the services provided by the provider.

Mailable::priority() — Method in class Mailable

Set the priority of this message.

Mailer::plain() — Method in class Mailer

Send a new message with only a plain part.

Mailer::parseView() — Method in class Mailer

Parse the given view name or array.

Markdown::parse() — Method in class Markdown

Parse the given Markdown text into HTML.

Message::priority() — Method in class Message

Set the message priority level.

PendingMailClass in namespace Illuminate\Mail
$ MailMessage#priorityProperty in class MailMessage

Priority level of the message.

MailMessage::priority() — Method in class MailMessage

Set the priority of this message.

MailMessage::parseAddresses() — Method in class MailMessage

Parse the multi-address array into the necessary format.

NotificationSender::preferredLocale() — Method in class NotificationSender

Get the notifiable's preferred locale for the notification.

$ AbstractCursorPaginator#perPageProperty in class AbstractCursorPaginator

The number of items to be shown per page.

$ AbstractCursorPaginator#pathProperty in class AbstractCursorPaginator

The base path to assign to all URLs.

$ AbstractCursorPaginator#parametersProperty in class AbstractCursorPaginator

The paginator parameters for the cursor.

AbstractCursorPaginator::previousPageUrl() — Method in class AbstractCursorPaginator

Get the URL for the previous page.

AbstractCursorPaginator::previousCursor() — Method in class AbstractCursorPaginator

Get the "cursor" that points to the previous set of items.

AbstractCursorPaginator::perPage() — Method in class AbstractCursorPaginator

Get the number of items shown per page.

AbstractCursorPaginator::path() — Method in class AbstractCursorPaginator

Get the base path for paginator generated URLs.

$ AbstractPaginator#perPageProperty in class AbstractPaginator

The number of items to be shown per page.

$ AbstractPaginator#pathProperty in class AbstractPaginator

The base path to assign to all URLs.

$ AbstractPaginator#pageNameProperty in class AbstractPaginator

The query string variable used to store the page.

AbstractPaginator::previousPageUrl() — Method in class AbstractPaginator

Get the URL for the previous page.

AbstractPaginator::perPage() — Method in class AbstractPaginator

Get the number of items shown per page.

AbstractPaginator::path() — Method in class AbstractPaginator

Get the base path for paginator generated URLs.

$ Cursor#parametersProperty in class Cursor

The parameters associated with the cursor.

$ Cursor#pointsToNextItemsProperty in class Cursor

Determine whether the cursor points to the next or previous set of items.

Cursor::parameter() — Method in class Cursor

Get the given parameter from the cursor.

Cursor::parameters() — Method in class Cursor

Get the given parameters from the cursor.

Cursor::pointsToNextItems() — Method in class Cursor

Determine whether the cursor points to the next set of items.

Cursor::pointsToPreviousItems() — Method in class Cursor

Determine whether the cursor points to the previous set of items.

PaginationServiceProviderClass in namespace Illuminate\Pagination
PaginationStateClass in namespace Illuminate\Pagination
PaginatorClass in namespace Illuminate\Pagination
$ UrlWindow#paginatorProperty in class UrlWindow

The paginator implementation.

$ Hub#pipelinesProperty in class Hub

All of the available pipelines.

Hub::pipeline() — Method in class Hub

Define a new named pipeline.

Hub::pipe() — Method in class Hub

Send an object through one of the available pipelines.

PipelineClass in namespace Illuminate\Pipeline
$ Pipeline#passableProperty in class Pipeline

The object being passed through the pipeline.

$ Pipeline#pipesProperty in class Pipeline

The array of class pipes.

Pipeline::pipe() — Method in class Pipeline

Push additional pipes onto the pipeline.

Pipeline::prepareDestination() — Method in class Pipeline

Get the final piece of the Closure onion.

Pipeline::parsePipeString() — Method in class Pipeline

Parse full pipe string to get name and parameters.

Pipeline::pipes() — Method in class Pipeline

Get the array of configured pipes.

PipelineServiceProviderClass in namespace Illuminate\Pipeline
PipelineServiceProvider::provides() — Method in class PipelineServiceProvider

Get the services provided by the provider.

ProcessFailedExceptionClass in namespace Illuminate\Process\Exceptions
ProcessTimedOutExceptionClass in namespace Illuminate\Process\Exceptions
$ Factory#preventStrayProcessesProperty in class Factory

Indicates that an exception should be thrown if any process is not faked.

Factory::preventStrayProcesses() — Method in class Factory

Indicate that an exception should be thrown if any process is not faked.

Factory::preventingStrayProcesses() — Method in class Factory

Determine if stray processes are being prevented.

Factory::pool() — Method in class Factory

Start defining a pool of processes.

$ FakeInvokedProcess#processProperty in class FakeInvokedProcess

The underlying process description.

FakeInvokedProcess::predictProcessResult() — Method in class FakeInvokedProcess

Get the ultimate process result that wil be returned by this "process".

$ FakeProcessDescription#processIdProperty in class FakeProcessDescription

The process' ID.

$ FakeProcessSequence#processesProperty in class FakeProcessSequence

The fake process results and descriptions.

FakeProcessSequence::push() — Method in class FakeProcessSequence

Push a new process result or description onto the sequence.

$ InvokedProcess#processProperty in class InvokedProcess

The underlying process instance.

PendingProcessClass in namespace Illuminate\Process
$ PendingProcess#pathProperty in class PendingProcess

The working directory of the process.

PendingProcess::path() — Method in class PendingProcess

Specify the working directory of the process.

PoolClass in namespace Illuminate\Process
$ Pool#pendingProcessesProperty in class Pool

The array of pending processes.

ProcessPoolResultsClass in namespace Illuminate\Process
ProcessResultClass in namespace Illuminate\Process
$ ProcessResult#processProperty in class ProcessResult

The underlying process instance.

$ BeanstalkdQueue#pheanstalkProperty in class BeanstalkdQueue

The Pheanstalk instance.

BeanstalkdQueue::push() — Method in class BeanstalkdQueue

Push a new job onto the queue.

BeanstalkdQueue::pushRaw() — Method in class BeanstalkdQueue

Push a raw payload onto the queue.

BeanstalkdQueue::pop() — Method in class BeanstalkdQueue

Pop the next job off of the queue.

Manager::push() — Method in class Manager

Push a new job onto the queue.

BeanstalkdConnector::pheanstalk() — Method in class BeanstalkdConnector

Create a Pheanstalk instance.

ListFailedCommand::parseFailedJob() — Method in class ListFailedCommand

Parse the failed job row.

MonitorCommand::parseQueues() — Method in class MonitorCommand

Parse the queues into an array of the connections and queues.

PruneBatchesCommandClass in namespace Illuminate\Queue\Console
PruneFailedJobsCommandClass in namespace Illuminate\Queue\Console
DatabaseQueue::push() — Method in class DatabaseQueue

Push a new job onto the queue.

DatabaseQueue::pushRaw() — Method in class DatabaseQueue

Push a raw payload onto the queue.

DatabaseQueue::pushToDatabase() — Method in class DatabaseQueue

Push a raw payload to the database with a given delay of (n) seconds.

DatabaseQueue::pop() — Method in class DatabaseQueue

Pop the next job off of the queue.

$ JobRetryRequested#payloadProperty in class JobRetryRequested

The decoded job payload.

JobRetryRequested::payload() — Method in class JobRetryRequested

The job payload.

DatabaseFailedJobProvider::prune() — Method in class DatabaseFailedJobProvider

Prune all of the entries older than the given date.

DatabaseUuidFailedJobProvider::prune() — Method in class DatabaseUuidFailedJobProvider

Prune all of the entries older than the given date.

PrunableFailedJobProviderClass in namespace Illuminate\Queue\Failed
PrunableFailedJobProvider::prune() — Method in class PrunableFailedJobProvider

Prune all of the entries older than the given date.

$ BeanstalkdJob#pheanstalkProperty in class BeanstalkdJob

The Pheanstalk instance.

Job::payload() — Method in class Job

Get the decoded body of the job.

JobName::parse() — Method in class JobName

Parse the given job name into a class / method array.

$ SyncJob#payloadProperty in class SyncJob

The queue message data.

Listener::phpBinary() — Method in class Listener

Get the PHP binary.

LuaScripts::push() — Method in class LuaScripts

Get the Lua script for pushing jobs onto the queue.

LuaScripts::pop() — Method in class LuaScripts

Get the Lua script for popping the next job off of the queue.

$ ThrottlesExceptions#prefixProperty in class ThrottlesExceptions

The prefix of the rate limiter key.

$ WithoutOverlapping#prefixProperty in class WithoutOverlapping

The prefix of the lock key.

NullQueue::push() — Method in class NullQueue

Push a new job onto the queue.

NullQueue::pushRaw() — Method in class NullQueue

Push a raw payload onto the queue.

NullQueue::pop() — Method in class NullQueue

Pop the next job off of the queue.

Queue::pushOn() — Method in class Queue

Push a new job onto the queue.

QueueServiceProvider::provides() — Method in class QueueServiceProvider

Get the services provided by the provider.

RedisQueue::push() — Method in class RedisQueue

Push a new job onto the queue.

RedisQueue::pushRaw() — Method in class RedisQueue

Push a raw payload onto the queue.

RedisQueue::pop() — Method in class RedisQueue

Pop the next job off of the queue.

$ SqsQueue#prefixProperty in class SqsQueue

The queue URL prefix.

SqsQueue::push() — Method in class SqsQueue

Push a new job onto the queue.

SqsQueue::pushRaw() — Method in class SqsQueue

Push a raw payload onto the queue.

SqsQueue::pop() — Method in class SqsQueue

Pop the next job off of the queue.

SyncQueue::push() — Method in class SyncQueue

Push a new job onto the queue.

SyncQueue::pushRaw() — Method in class SyncQueue

Push a raw payload onto the queue.

SyncQueue::pop() — Method in class SyncQueue

Pop the next job off of the queue.

$ Worker#pausedProperty in class Worker

Indicates if the worker is paused.

$ Worker#popCallbacksProperty in class Worker

The callbacks used to pop jobs from queues.

Worker::pauseWorker() — Method in class Worker

Pause the worker for the current loop.

Worker::process() — Method in class Worker

Process the given job from the queue.

Worker::popUsing() — Method in class Worker

Register a callback to be executed to pick jobs.

Connection::psubscribe() — Method in class Connection

Subscribe to a set of given channels with wildcards.

PacksPhpRedisValuesClass in namespace Illuminate\Redis\Connections
PacksPhpRedisValues::pack() — Method in class PacksPhpRedisValues

Prepares the given values to be used with the eval command, including serialization and compression.

PacksPhpRedisValues::phpRedisVersionAtLeast() — Method in class PacksPhpRedisValues

Determine if the PhpRedis extension version is at least the given version.

PhpRedisClusterConnectionClass in namespace Illuminate\Redis\Connections
PhpRedisConnectionClass in namespace Illuminate\Redis\Connections
PhpRedisConnection::pipeline() — Method in class PhpRedisConnection

Execute commands in a pipeline.

PhpRedisConnection::psubscribe() — Method in class PhpRedisConnection

Subscribe to a set of given channels with wildcards.

PredisClusterConnectionClass in namespace Illuminate\Redis\Connections
PredisConnectionClass in namespace Illuminate\Redis\Connections
PhpRedisConnectorClass in namespace Illuminate\Redis\Connectors
PredisConnectorClass in namespace Illuminate\Redis\Connectors
$ CommandExecuted#parametersProperty in class CommandExecuted

The array of command parameters.

RedisManager::parseConnectionConfiguration() — Method in class RedisManager

Parse the Redis connection configuration.

RedisManager::purge() — Method in class RedisManager

Disconnect the given connection and remove from local cache.

RedisServiceProvider::provides() — Method in class RedisServiceProvider

Get the services provided by the provider.

ControllerMakeCommand::parseModel() — Method in class ControllerMakeCommand

Get the fully-qualified model class name.

MiddlewareNameResolver::parseMiddlewareGroup() — Method in class MiddlewareNameResolver

Parse the middleware group and format it for usage.

PendingResourceRegistrationClass in namespace Illuminate\Routing
PendingResourceRegistration::parameters() — Method in class PendingResourceRegistration

Override the route parameter names.

PendingResourceRegistration::parameter() — Method in class PendingResourceRegistration

Override a route parameter's name.

PendingSingletonResourceRegistrationClass in namespace Illuminate\Routing
PendingSingletonResourceRegistration::parameters() — Method in class PendingSingletonResourceRegistration

Override the route parameter names.

PendingSingletonResourceRegistration::parameter() — Method in class PendingSingletonResourceRegistration

Override a route parameter's name.

PipelineClass in namespace Illuminate\Routing

This extended pipeline catches any exceptions that occur during each slice.

$ ResourceRegistrar#parametersProperty in class ResourceRegistrar

The parameters set for this resource instance.

$ ResourceRegistrar#parameterMapProperty in class ResourceRegistrar

The global parameter mapping.

ResourceRegistrar::prefixedResource() — Method in class ResourceRegistrar

Build a set of prefixed resource routes.

ResourceRegistrar::prefixedSingleton() — Method in class ResourceRegistrar

Build a set of prefixed singleton routes.

$ Route#parametersProperty in class Route

The array of matched parameters.

$ Route#parameterNamesProperty in class Route

The parameter names for the route.

Route::parseAction() — Method in class Route

Parse the route action into a standard array.

Route::parseControllerCallback() — Method in class Route

Parse the controller.

Route::parameter() — Method in class Route

Get a given parameter from the route.

Route::parameters() — Method in class Route

Get the key / value list of parameters for the route.

Route::parametersWithoutNulls() — Method in class Route

Get the key / value list of parameters without null values.

Route::parameterNames() — Method in class Route

Get all of the parameter names for the route.

Route::parentOfParameter() — Method in class Route

Get the parent parameter of the given parameter.

Route::parseWhere() — Method in class Route

Parse arguments to the where method into an array.

Route::prefix() — Method in class Route

Add a prefix to the route URI.

Route::parseUri() — Method in class Route

Parse the route URI and normalize / store any implicit binding fields.

Route::preventsScopedBindings() — Method in class Route

Determine if the route should prevent scoping of multiple implicit Eloquent bindings.

Route::prepareForSerialization() — Method in class Route

Prepare the route instance for serialization.

RouteAction::parse() — Method in class RouteAction

Parse the given action into an array.

RouteParameterBinder::parameters() — Method in class RouteParameterBinder

Get the parameters for the route.

$ RouteRegistrar#passthruProperty in class RouteRegistrar

The methods to dynamically pass through to the router.

RouteRegistrar::patch() — Method in class RouteRegistrar
RouteRegistrar::post() — Method in class RouteRegistrar
RouteRegistrar::put() — Method in class RouteRegistrar
RouteRegistrar::prefix() — Method in class RouteRegistrar
RouteUri::parse() — Method in class RouteUri

Parse the given URI.

$ Router#patternsProperty in class Router

The globally available parameter patterns.

Router::post() — Method in class Router

Register a new POST route with the router.

Router::put() — Method in class Router

Register a new PUT route with the router.

Router::patch() — Method in class Router

Register a new PATCH route with the router.

Router::permanentRedirect() — Method in class Router

Create a permanent redirect from one URI to another.

Router::prependGroupNamespace() — Method in class Router

Prepend the last group namespace onto the use clause.

Router::prependGroupController() — Method in class Router

Prepend the last group controller onto the use clause.

Router::prefix() — Method in class Router

Prefix the given URI with the last prefix.

Router::prepareResponse() — Method in class Router

Create a response instance from the given value.

Router::performBinding() — Method in class Router

Call the binding callback for the given key.

Router::prependMiddlewareToGroup() — Method in class Router

Add a middleware to the beginning of a middleware group.

Router::pushMiddlewareToGroup() — Method in class Router

Add a middleware to the end of a middleware group.

Router::pattern() — Method in class Router

Set a global where pattern on all routes.

Router::patterns() — Method in class Router

Set a group of global where patterns on all routes.

SortedMiddleware::priorityMapIndex() — Method in class SortedMiddleware

Calculate the priority map index of the middleware.

UrlGenerator::previous() — Method in class UrlGenerator

Get the URL for the previous request.

UrlGenerator::previousPath() — Method in class UrlGenerator

Get the previous path info for the request.

UrlGenerator::pathFormatter() — Method in class UrlGenerator

Get the path formatter being used by the URL generator.

DatabaseSessionHandler::performInsert() — Method in class DatabaseSessionHandler

Perform an insert operation on the session ID.

DatabaseSessionHandler::performUpdate() — Method in class DatabaseSessionHandler

Perform an update operation on the session ID.

EncryptedStore::prepareForUnserialize() — Method in class EncryptedStore

Prepare the raw string data from the session for unserialization.

EncryptedStore::prepareForStorage() — Method in class EncryptedStore

Prepare the serialized session data for storage.

$ FileSessionHandler#pathProperty in class FileSessionHandler

The path where sessions should be stored.

Store::prepareForUnserialize() — Method in class Store

Prepare the raw string data from the session for unserialization.

Store::prepareErrorBagForSerialization() — Method in class Store

Prepare the ViewErrorBag instance for JSON serialization.

Store::prepareForStorage() — Method in class Store

Prepare the serialized session data for storage.

Store::pull() — Method in class Store

Get the value of a given key and then forget it.

Store::put() — Method in class Store

Put a key / value pair or array of key / value pairs in the session.

Store::push() — Method in class Store

Push a value onto a session array.

Store::previousUrl() — Method in class Store

Get the previous URL from the session.

Store::passwordConfirmed() — Method in class Store

Specify that the user has confirmed their password.

$ AggregateServiceProvider#providersProperty in class AggregateServiceProvider

The provider class names.

AggregateServiceProvider::provides() — Method in class AggregateServiceProvider

Get the services provided by the provider.

Arr::prependKeysWith() — Method in class Arr

Prepend the key names of an associative array.

Arr::pluck() — Method in class Arr

Pluck an array of values from an array.

Arr::prepend() — Method in class Arr

Push an item onto the beginning of an array.

Arr::pull() — Method in class Arr

Get a value from the array, and remove it.

Collection::pluck() — Method in class Collection
Collection::pop() — Method in class Collection
Collection::prepend() — Method in class Collection

Push an item onto the beginning of the collection.

Collection::push() — Method in class Collection

Push one or more items onto the end of the collection.

Collection::pull() — Method in class Collection
Collection::put() — Method in class Collection

Put an item in the collection by key.

Collection::pad() — Method in class Collection
Composer::phpBinary() — Method in class Composer

Get the PHP binary.

ConfigurationUrlParser::parseConfiguration() — Method in class ConfigurationUrlParser

Parse the database configuration, hydrating options using a database configuration URL if possible.

ConfigurationUrlParser::parseUrl() — Method in class ConfigurationUrlParser

Parse the string URL to an array of components.

ConfigurationUrlParser::parseStringsToNativeTypes() — Method in class ConfigurationUrlParser

Convert string casted values to their native types.

DateFactory::parse() — Method in class DateFactory
DateFactory::pluralUnit() — Method in class DateFactory
Enumerable::partition() — Method in class Enumerable
Enumerable::pipe() — Method in class Enumerable

Pass the enumerable to the given callback and return the result.

Enumerable::pipeInto() — Method in class Enumerable

Pass the collection into a new class.

Enumerable::pipeThrough() — Method in class Enumerable

Pass the collection through a series of callable pipes and return the result.

Enumerable::pluck() — Method in class Enumerable
Enumerable::pad() — Method in class Enumerable
Enumerable::proxy() — Method in class Enumerable

Add a method to the list of proxied methods.

$ Env#putenvProperty in class Env

Indicates if the putenv adapter is enabled.

App::path() — Method in class App
App::publicPath() — Method in class App
App::providerIsLoaded() — Method in class App
App::provideFacades() — Method in class App
Auth::provider() — Method in class Auth
Blade::precompiler() — Method in class Blade
Broadcast::pusher() — Method in class Broadcast
Broadcast::purge() — Method in class Broadcast
Bus::pipeThrough() — Method in class Bus
Cache::purge() — Method in class Cache
Cache::pull() — Method in class Cache
Cache::put() — Method in class Cache
Cache::putMany() — Method in class Cache
Config::prepend() — Method in class Config
Config::push() — Method in class Config
DB::purge() — Method in class DB
DB::pretend() — Method in class DB
DB::prepareBindings() — Method in class DB
DB::pretending() — Method in class DB
Date::parse() — Method in class Date
Date::pluralUnit() — Method in class Date
Event::push() — Method in class Event
Facade::partialMock() — Method in class Facade

Initiate a partial mock on the facade.

File::put() — Method in class File
File::prepend() — Method in class File
Gate::policy() — Method in class Gate
Gate::policies() — Method in class Gate
Http::preventStrayRequests() — Method in class Http

Indicate that an exception should be thrown if any request is not faked.

Http::post() — Method in class Http
Http::patch() — Method in class Http
Http::put() — Method in class Http
Http::pool() — Method in class Http
Http::pushHandlers() — Method in class Http
Lang::parseKey() — Method in class Lang
Mail::purge() — Method in class Mail
Mail::plain() — Method in class Mail
ParallelTestingClass in namespace Illuminate\Support\Facades
PasswordClass in namespace Illuminate\Support\Facades
PipelineClass in namespace Illuminate\Support\Facades
Pipeline::pipe() — Method in class Pipeline
ProcessClass in namespace Illuminate\Support\Facades
Process::path() — Method in class Process
Process::preventStrayProcesses() — Method in class Process
Process::preventingStrayProcesses() — Method in class Process
Process::pool() — Method in class Process
Queue::popUsing() — Method in class Queue

Register a callback to be executed to pick jobs.

Queue::push() — Method in class Queue
Queue::pushOn() — Method in class Queue
Queue::pushRaw() — Method in class Queue
Queue::pop() — Method in class Queue
Queue::pushed() — Method in class Queue
Queue::pushedJobs() — Method in class Queue
Redis::purge() — Method in class Redis
Redis::psubscribe() — Method in class Redis
Request::path() — Method in class Request
Request::pjax() — Method in class Request
Request::prefetch() — Method in class Request
Request::preferSafeContent() — Method in class Request
Request::prefers() — Method in class Request
Request::post() — Method in class Request
Route::post() — Method in class Route
Route::put() — Method in class Route
Route::patch() — Method in class Route
Route::permanentRedirect() — Method in class Route
Route::prepareResponse() — Method in class Route
Route::prependMiddlewareToGroup() — Method in class Route
Route::pushMiddlewareToGroup() — Method in class Route
Route::pattern() — Method in class Route
Route::patterns() — Method in class Route
Route::prefix() — Method in class Route
Session::pull() — Method in class Session
Session::put() — Method in class Session
Session::push() — Method in class Session
Session::previousUrl() — Method in class Session
Session::passwordConfirmed() — Method in class Session
Storage::persistentFake() — Method in class Storage

Replace the given disk with a persistent local testing disk.

Storage::purge() — Method in class Storage
Storage::put() — Method in class Storage
Storage::prepend() — Method in class Storage
Storage::path() — Method in class Storage
Storage::putFile() — Method in class Storage
Storage::putFileAs() — Method in class Storage
Storage::providesTemporaryUrls() — Method in class Storage
URL::previous() — Method in class URL
URL::previousPath() — Method in class URL
URL::pathFormatter() — Method in class URL
View::prependNamespace() — Method in class View
View::parentPlaceholder() — Method in class View
View::popLoop() — Method in class View
Vite::preloadedAssets() — Method in class Vite
InteractsWithTime::parseDateInterval() — Method in class InteractsWithTime

If the given value is an interval, convert it to a DateTime instance.

LazyCollection::pluck() — Method in class LazyCollection
LazyCollection::pad() — Method in class LazyCollection
LazyCollection::passthru() — Method in class LazyCollection

Pass this lazy collection through a method on the collection class.

MultipleInstanceManager::purge() — Method in class MultipleInstanceManager

Disconnect the given instance and remove from local cache.

$ NamespacedItemResolver#parsedProperty in class NamespacedItemResolver

A cache of the parsed items.

NamespacedItemResolver::parseKey() — Method in class NamespacedItemResolver

Parse a key into namespace, group, and item.

NamespacedItemResolver::parseBasicSegments() — Method in class NamespacedItemResolver

Parse an array of basic segments.

NamespacedItemResolver::parseNamespacedSegments() — Method in class NamespacedItemResolver

Parse an array of namespaced segments.

PluralizerClass in namespace Illuminate\Support
Pluralizer::plural() — Method in class Pluralizer

Get the plural form of an English word.

ProcessUtilsClass in namespace Illuminate\Support

ProcessUtils is a bunch of utility methods.

$ ServiceProvider#publishesProperty in class ServiceProvider

The paths that should be published.

$ ServiceProvider#publishGroupsProperty in class ServiceProvider

The paths that should be published by group.

ServiceProvider::publishes() — Method in class ServiceProvider

Register paths to be published by the publish command.

ServiceProvider::pathsToPublish() — Method in class ServiceProvider

Get the paths to publish.

ServiceProvider::pathsForProviderOrGroup() — Method in class ServiceProvider

Get the paths for the provider or group (or both).

ServiceProvider::pathsForProviderAndGroup() — Method in class ServiceProvider

Get the paths for the provider and group.

ServiceProvider::publishableProviders() — Method in class ServiceProvider

Get the service providers available for publishing.

ServiceProvider::publishableGroups() — Method in class ServiceProvider

Get the groups available for publishing.

ServiceProvider::provides() — Method in class ServiceProvider

Get the services provided by the provider.

Str::padBoth() — Method in class Str

Pad both sides of a string with another.

Str::padLeft() — Method in class Str

Pad the left side of a string with another.

Str::padRight() — Method in class Str

Pad the right side of a string with another.

Str::parseCallback() — Method in class Str

Parse a Class[@]method style callback into class and method.

Str::plural() — Method in class Str

Get the plural form of an English word.

Str::pluralStudly() — Method in class Str

Pluralize the last word of an English, studly caps case string.

Str::password() — Method in class Str

Generate a random, secure password.

Stringable::padBoth() — Method in class Stringable

Pad both sides of the string with another.

Stringable::padLeft() — Method in class Stringable

Pad the left side of the string with another.

Stringable::padRight() — Method in class Stringable

Pad the right side of the string with another.

Stringable::parseCallback() — Method in class Stringable

Parse a [email protected] style callback into class and method.

Stringable::pipe() — Method in class Stringable

Call the given callback and return a new string.

Stringable::plural() — Method in class Stringable

Get the plural form of an English word.

Stringable::pluralStudly() — Method in class Stringable

Pluralize the last word of an English, studly caps case string.

Stringable::prepend() — Method in class Stringable

Prepend the given values to the string.

BusFake::pipeThrough() — Method in class BusFake

Set the pipes commands should be piped through before dispatching.

EventFake::push() — Method in class EventFake

Register an event and payload to be dispatched later.

MailFake::prepareMailableAndCallback() — Method in class MailFake

Infer mailable class using reflection if a typehinted closure is passed to assertion.

PendingBatchFakeClass in namespace Illuminate\Support\Testing\Fakes
PendingChainFakeClass in namespace Illuminate\Support\Testing\Fakes
PendingMailFakeClass in namespace Illuminate\Support\Testing\Fakes
QueueFake::pushed() — Method in class QueueFake

Get all of the jobs matching a truth-test callback.

QueueFake::push() — Method in class QueueFake

Push a new job onto the queue.

QueueFake::pushRaw() — Method in class QueueFake

Push a raw payload onto the queue.

QueueFake::pushOn() — Method in class QueueFake

Push a new job onto the queue.

QueueFake::pop() — Method in class QueueFake

Pop the next job off of the queue.

QueueFake::pushedJobs() — Method in class QueueFake

Get the jobs that have been pushed.

$ EnumeratesValues#proxiesProperty in class EnumeratesValues

The methods that can be proxied.

$ EnumeratesValues#partitionProperty in class EnumeratesValues
EnumeratesValues::partition() — Method in class EnumeratesValues
EnumeratesValues::pipe() — Method in class EnumeratesValues

Pass the collection to the given callback and return the result.

EnumeratesValues::pipeInto() — Method in class EnumeratesValues

Pass the collection into a new class.

EnumeratesValues::pipeThrough() — Method in class EnumeratesValues

Pass the collection through a series of callable pipes and return the result.

EnumeratesValues::proxy() — Method in class EnumeratesValues

Add a method to the list of proxied methods.

ViewErrorBag::put() — Method in class ViewErrorBag

Add a new MessageBag instance to the bags.

AssertableJson::prop() — Method in class AssertableJson

Retrieve a prop within the current scope using "dot" notation.

Debugging::prop() — Method in class Debugging

Retrieve a prop within the current scope using "dot" notation.

Has::prop() — Method in class Has

Retrieve a prop within the current scope using "dot" notation.

Interaction::prop() — Method in class Interaction

Retrieve a prop within the current scope using "dot" notation.

Matching::prop() — Method in class Matching

Retrieve a prop within the current scope using "dot" notation.

ParallelConsoleOutputClass in namespace Illuminate\Testing
ParallelRunnerClass in namespace Illuminate\Testing
ParallelTestingClass in namespace Illuminate\Testing
ParallelTestingServiceProviderClass in namespace Illuminate\Testing
PendingCommandClass in namespace Illuminate\Testing
$ PendingCommand#parametersProperty in class PendingCommand

The parameters to pass to the command.

$ FileLoader#pathsProperty in class FileLoader

The default paths for the loader.

PotentiallyTranslatedStringClass in namespace Illuminate\Translation
TranslationServiceProvider::provides() — Method in class TranslationServiceProvider

Get the services provided by the provider.

Translator::parseKey() — Method in class Translator

Parse a key into namespace, group, and item.

ClosureValidationRule::passes() — Method in class ClosureValidationRule

Determine if the validation rule passes.

ClosureValidationRule::pendingPotentiallyTranslatedString() — Method in class ClosureValidationRule

Create a pending potentially translated string.

ValidatesAttributes::prepareUniqueId() — Method in class ValidatesAttributes

Prepare the given ID for querying.

ValidatesAttributes::parseTable() — Method in class ValidatesAttributes

Parse the connection / table for the unique / exists rules.

ValidatesAttributes::parseDependentRuleParameters() — Method in class ValidatesAttributes

Prepare the values and the other value for validation.

ValidatesAttributes::parseNamedParameters() — Method in class ValidatesAttributes

Parse named parameters to $key => $value items.

ConditionalRules::passes() — Method in class ConditionalRules

Determine if the conditional rules should be added.

PresenceVerifierInterfaceClass in namespace Illuminate\Validation
Rule::prohibitedIf() — Method in class Rule

Get a prohibited_if constraint builder instance.

Enum::passes() — Method in class Enum

Determine if the validation rule passes.

File::passes() — Method in class File

Determine if the validation rule passes.

PasswordClass in namespace Illuminate\Validation\Rules
Password::passes() — Method in class Password

Determine if the validation rule passes.

ProhibitedIfClass in namespace Illuminate\Validation\Rules
ValidatesWhenResolvedTrait::prepareForValidation() — Method in class ValidatesWhenResolvedTrait

Prepare the data for validation.

ValidatesWhenResolvedTrait::passedValidation() — Method in class ValidatesWhenResolvedTrait

Handle a passed validation attempt.

ValidatesWhenResolvedTrait::passesAuthorization() — Method in class ValidatesWhenResolvedTrait

Determine if the request passes the authorization check.

ValidationRuleParser::prepareRule() — Method in class ValidationRuleParser

Prepare the given rule for the Validator.

ValidationRuleParser::parse() — Method in class ValidationRuleParser

Extract the rule name and parameters from a rule.

ValidationRuleParser::parseArrayRule() — Method in class ValidationRuleParser

Parse an array based rule.

ValidationRuleParser::parseStringRule() — Method in class ValidationRuleParser

Parse a string based rule.

ValidationRuleParser::parseParameters() — Method in class ValidationRuleParser

Parse a parameter list.

ValidationServiceProvider::provides() — Method in class ValidationServiceProvider

Get the services provided by the provider.

$ Validator#presenceVerifierProperty in class Validator

The Presence Verifier implementation.

Validator::parseData() — Method in class Validator

Parse the data array, converting dots and asterisks.

Validator::passes() — Method in class Validator

Determine if the data passes the validation rules.

Validator::presentOrRuleIsImplicit() — Method in class Validator

Determine if the field is present, or the rule implies required.

Validator::passesOptionalCheck() — Method in class Validator

Determine if the attribute passes any optional check.

$ BladeCompiler#precompilersProperty in class BladeCompiler

All of the registered precompilers.

$ BladeCompiler#pathProperty in class BladeCompiler

The file currently being compiled.

ComponentTagCompiler::partitionDataAndAttributes() — Method in class ComponentTagCompiler

Partition the data and extra attributes from the given array of attributes.

ComponentTagCompiler::parseShortAttributeSyntax() — Method in class ComponentTagCompiler

Parses a short attribute syntax like :$foo into a fully-qualified syntax like :foo="$foo".

ComponentTagCompiler::parseAttributeBag() — Method in class ComponentTagCompiler

Parse the attribute bag in a given attribute string into its fully-qualified syntax.

ComponentTagCompiler::parseComponentTagClassStatements() — Method in class ComponentTagCompiler

Parse @class statements in a given attribute string into their fully-qualified syntax.

ComponentTagCompiler::parseComponentTagStyleStatements() — Method in class ComponentTagCompiler

Parse @style statements in a given attribute string into their fully-qualified syntax.

ComponentTagCompiler::parseBindAttributes() — Method in class ComponentTagCompiler

Parse the "bind" attributes in a given attribute string into their fully-qualified syntax.

$ Component#propertyCacheProperty in class Component

The cache of public property names, keyed by class.

ComponentAttributeBag::prepends() — Method in class ComponentAttributeBag

Create a new appendable attribute value.

ManagesEvents::parseClassEvent() — Method in class ManagesEvents

Parse a class based composer name.

$ ManagesLayouts#parentPlaceholderProperty in class ManagesLayouts

The parent placeholder for the request.

$ ManagesLayouts#parentPlaceholderSaltProperty in class ManagesLayouts

The parent placeholder salt for the request.

ManagesLayouts::parentPlaceholder() — Method in class ManagesLayouts

Get the parent placeholder for the current request.

ManagesLayouts::parentPlaceholderSalt() — Method in class ManagesLayouts

Get the parent placeholder salt.

ManagesLoops::popLoop() — Method in class ManagesLoops

Pop a loop from the top of the loop stack.

$ ManagesStacks#pushesProperty in class ManagesStacks

All of the finished, captured push sections.

$ ManagesStacks#prependsProperty in class ManagesStacks

All of the finished, captured prepend sections.

$ ManagesStacks#pushStackProperty in class ManagesStacks

The stack of in-progress push sections.

PhpEngineClass in namespace Illuminate\View\Engines
Factory::parseData() — Method in class Factory

Parse the given data into a raw array.

Factory::prependNamespace() — Method in class Factory

Prepend a new namespace to the loader.

$ FileViewFinder#pathsProperty in class FileViewFinder

The array of active view paths.

FileViewFinder::parseNamespaceSegments() — Method in class FileViewFinder

Get the segments of a template with a named path.

FileViewFinder::prependLocation() — Method in class FileViewFinder

Prepend a location to the finder.

FileViewFinder::prependNamespace() — Method in class FileViewFinder

Prepend a namespace hint to the finder.

$ View#pathProperty in class View

The path to the view file.

ViewFinderInterface::prependNamespace() — Method in class ViewFinderInterface

Prepend a namespace hint to the finder.

Q

$ EloquentUserProvider#queryCallbackProperty in class EloquentUserProvider

The callback that may modify the user retrieval queries.

SessionGuard::queueRecallerCookie() — Method in class SessionGuard

Queue the recaller cookie into the cookie jar.

BroadcastManager::queue() — Method in class BroadcastManager

Queue the given event for broadcast.

$ Batch#queueProperty in class Batch

The queue factory implementation.

$ BatchFactory#queueProperty in class BatchFactory

The queue factory implementation.

$ Dispatcher#queueResolverProperty in class Dispatcher

The queue resolver callback.

PendingBatch::queue() — Method in class PendingBatch

Get the queue used by the pending batch.

QueueableClass in namespace Illuminate\Bus
$ Queueable#queueProperty in class Queueable

The name of the queue the job should be sent to.

InteractsWithIO::question() — Method in class InteractsWithIO

Write a string as question output.

GeneratorCommand::qualifyClass() — Method in class GeneratorCommand

Parse the class name and format according to the root namespace.

GeneratorCommand::qualifyModel() — Method in class GeneratorCommand

Qualify the given model class base name.

QuestionHelperClass in namespace Illuminate\Console
ManagesFrequencies::quarterly() — Method in class ManagesFrequencies

Schedule the event to run quarterly.

ManagesFrequencies::quarterlyOn() — Method in class ManagesFrequencies

Schedule the event to run quarterly on a given day and time.

QueueingDispatcherClass in namespace Illuminate\Contracts\Bus
Kernel::queue() — Method in class Kernel

Queue an Artisan console command by name.

QueueingFactoryClass in namespace Illuminate\Contracts\Cookie
QueueingFactory::queue() — Method in class QueueingFactory

Queue a cookie to send with the next response.

MailQueue::queue() — Method in class MailQueue

Queue a new e-mail message for sending.

Mailable::queue() — Method in class Mailable

Queue the given message.

QueueClass in namespace Illuminate\Contracts\Queue
QueueableCollectionClass in namespace Illuminate\Contracts\Queue
QueueableEntityClass in namespace Illuminate\Contracts\Queue
$ CookieJar#queuedProperty in class CookieJar

All of the cookies queued for sending.

CookieJar::queued() — Method in class CookieJar

Get a queued cookie instance.

CookieJar::queue() — Method in class CookieJar

Queue a cookie to send with the next response.

$ Connection#queryGrammarProperty in class Connection

The query grammar implementation.

$ Connection#queryLogProperty in class Connection

All of the queries run against the connection.

$ Connection#queryDurationHandlersProperty in class Connection

All of the registered query duration handlers.

Connection::query() — Method in class Connection

Get a new query builder instance.

PostgresConnector::quoteSearchPath() — Method in class PostgresConnector

Format the search path for the DSN.

ShowModelCommand::qualifyModel() — Method in class ShowModelCommand

Qualify the given model class base name.

$ BroadcastableModelEventOccurred#queueProperty in class BroadcastableModelEventOccurred

The queue that should be used to queue the broadcast job.

$ Builder#queryProperty in class Builder

The base query builder instance.

Builder::qualifyColumn() — Method in class Builder

Qualify the given column name by the model's table.

Builder::qualifyColumns() — Method in class Builder

Qualify the given columns with the model's table.

QueriesRelationshipsClass in namespace Illuminate\Database\Eloquent\Concerns
Model::qualifyColumn() — Method in class Model

Qualify the given column name by the model's table.

Model::qualifyColumns() — Method in class Model

Qualify the given columns with the model's table.

Model::query() — Method in class Model

Begin querying the model.

QueueEntityResolverClass in namespace Illuminate\Database\Eloquent
BelongsToMany::qualifyPivotColumn() — Method in class BelongsToMany

Qualify the given column name by the pivot table.

CanBeOneOfMany::qualifySubSelectColumn() — Method in class CanBeOneOfMany

Get the qualified column name for the one-of-many relationship using the subselect join query's alias.

CanBeOneOfMany::qualifyRelatedColumn() — Method in class CanBeOneOfMany

Qualify related column using the related table name if it is not already qualified.

$ Relation#queryProperty in class Relation

The Eloquent query builder instance.

QueryExecutedClass in namespace Illuminate\Database\Events
Grammar::quoteString() — Method in class Grammar

Quote the given string literal.

Connection::query() — Method in class Connection

Execute a new query against the connection.

Connection::quote() — Method in class Connection

Wrap quotes around the given input.

SqlServerConnection::query() — Method in class SqlServerConnection

Execute a new query against the connection.

SqlServerConnection::quote() — Method in class SqlServerConnection

Wrap quotes around the given input.

QueryExceptionClass in namespace Illuminate\Database
SqlServerGrammar::quoteString() — Method in class SqlServerGrammar

Quote the given string literal.

$ Dispatcher#queueResolverProperty in class Dispatcher

The queue resolver instance.

Dispatcher::queueHandler() — Method in class Dispatcher

Queue the handler class.

QueuedClosureClass in namespace Illuminate\Events
$ QueuedClosure#queueProperty in class QueuedClosure

The name of the queue the job should be sent to.

$ PendingChain#queueProperty in class PendingChain

The name of the queue the chain should be sent to.

Kernel::queue() — Method in class Kernel

Queue the given console command.

QueuedCommandClass in namespace Illuminate\Foundation\Console
Inspiring::quote() — Method in class Inspiring

Get an inspiring quote.

Inspiring::quotes() — Method in class Inspiring

Get the collection of inspiring quotes.

InteractsWithInput::query() — Method in class InteractsWithInput

Retrieve a query string item from the request.

$ ResourceCollection#queryParametersProperty in class ResourceCollection

The query parameters that should be added to the pagination links.

Mailable::queue() — Method in class Mailable

Queue the message for sending.

$ Mailer#queueProperty in class Mailer

The queue factory implementation.

Mailer::queue() — Method in class Mailer

Queue a new e-mail message for sending.

Mailer::queueOn() — Method in class Mailer

Queue a new e-mail message for sending on the given queue.

PendingMail::queue() — Method in class PendingMail

Push the given mailable onto the queue.

NotificationSender::queueNotification() — Method in class NotificationSender

Queue the given notification instances.

$ AbstractCursorPaginator#queryProperty in class AbstractCursorPaginator

The query parameters to add to all URLs.

$ AbstractPaginator#queryProperty in class AbstractPaginator

The query parameters to add to all URLs.

$ AbstractPaginator#queryStringResolverProperty in class AbstractPaginator

The query string resolver callback.

AbstractPaginator::queryStringResolver() — Method in class AbstractPaginator

Set with query string resolver callback.

$ PendingProcess#quietlyProperty in class PendingProcess

Indicates whether output should be disabled for the process.

PendingProcess::quietly() — Method in class PendingProcess

Disable output for the process.

$ Looping#queueProperty in class Looping

The queue name.

QueueBusyClass in namespace Illuminate\Queue\Events
$ QueueBusy#queueProperty in class QueueBusy

The queue name.

$ Job#queueProperty in class Job

The name of the queue the job belongs to.

QueueClass in namespace Illuminate\Queue
QueueManagerClass in namespace Illuminate\Queue
QueueServiceProviderClass in namespace Illuminate\Queue
Worker::queueShouldRestart() — Method in class Worker

Determine if the queue worker should restart.

Arr::query() — Method in class Arr

Convert the array into a query string.

Artisan::queue() — Method in class Artisan
Broadcast::queue() — Method in class Broadcast
Cookie::queued() — Method in class Cookie
Cookie::queue() — Method in class Cookie
DB::query() — Method in class DB
Mail::queue() — Method in class Mail
Mail::queueOn() — Method in class Mail
Mail::queued() — Method in class Mail
Process::quietly() — Method in class Process
QueueClass in namespace Illuminate\Support\Facades
Request::query() — Method in class Request
$ MailFake#queuedMailablesProperty in class MailFake

All of the mailables that have been queued.

MailFake::queued() — Method in class MailFake

Get all of the queued mailables matching a truth-test callback.

MailFake::queuedMailablesOf() — Method in class MailFake

Get all of the mailed mailables for a given type.

MailFake::queue() — Method in class MailFake

Queue a new e-mail message for sending.

PendingMailFake::queue() — Method in class PendingMailFake

Push the given mailable onto the queue.

QueueFakeClass in namespace Illuminate\Support\Testing\Fakes
$ QueueFake#queueProperty in class QueueFake

The original queue manager.

DatabaseRule::queryCallbacks() — Method in class DatabaseRule

Get the custom query callbacks for the rule.

R

$ AuthorizationException#responseProperty in class AuthorizationException

The response from the gate.

AuthorizationException::response() — Method in class AuthorizationException

Get the response from the gate.

$ GateEvaluated#resultProperty in class GateEvaluated

The result of the evaluation.

Gate::resource() — Method in class Gate

Define abilities for a resource.

Gate::raw() — Method in class Gate

Get the raw result from the authorization callback.

Gate::resolveAuthCallback() — Method in class Gate

Resolve the callable for the given ability and arguments.

Gate::resolvePolicy() — Method in class Gate

Build a policy class instance of the given type.

Gate::resolvePolicyCallback() — Method in class Gate

Resolve the callback for a policy check.

Gate::resolveUser() — Method in class Gate

Resolve the user from the user resolver.

ResponseClass in namespace Illuminate\Auth\Access
AuthManager::resolve() — Method in class AuthManager

Resolve the given guard.

AuthManager::resolveUsersUsing() — Method in class AuthManager

Set the callback to be used to resolve users.

AuthServiceProvider::register() — Method in class AuthServiceProvider

Register the service provider.

AuthServiceProvider::registerAuthenticator() — Method in class AuthServiceProvider

Register the authenticator services.

AuthServiceProvider::registerUserResolver() — Method in class AuthServiceProvider

Register a resolver for the authenticated user.

AuthServiceProvider::registerAccessGate() — Method in class AuthServiceProvider

Register the access gate service.

AuthServiceProvider::registerRequirePassword() — Method in class AuthServiceProvider

Register a resolver for the authenticated user.

AuthServiceProvider::registerRequestRebindHandler() — Method in class AuthServiceProvider

Handle the re-binding of the request binding.

AuthServiceProvider::registerEventRebindHandler() — Method in class AuthServiceProvider

Handle the re-binding of the event dispatcher binding.

$ Authenticatable#rememberTokenNameProperty in class Authenticatable

The column name of the "remember me" token.

$ AuthenticationException#redirectToProperty in class AuthenticationException

The path the user should be redirected to.

AuthenticationException::redirectTo() — Method in class AuthenticationException

Get the path the user should be redirected to.

DatabaseUserProvider::retrieveById() — Method in class DatabaseUserProvider

Retrieve a user by their unique identifier.

DatabaseUserProvider::retrieveByToken() — Method in class DatabaseUserProvider

Retrieve a user by their unique identifier and "remember me" token.

DatabaseUserProvider::retrieveByCredentials() — Method in class DatabaseUserProvider

Retrieve a user by the given credentials.

EloquentUserProvider::retrieveById() — Method in class EloquentUserProvider

Retrieve a user by their unique identifier.

EloquentUserProvider::retrieveByToken() — Method in class EloquentUserProvider

Retrieve a user by their unique identifier and "remember me" token.

EloquentUserProvider::retrieveByCredentials() — Method in class EloquentUserProvider

Retrieve a user by the given credentials.

$ Attempting#rememberProperty in class Attempting

Indicates if the user should be "remembered".

$ Lockout#requestProperty in class Lockout

The throttled request.

$ Login#rememberProperty in class Login

Indicates if the user should be "remembered".

RegisteredClass in namespace Illuminate\Auth\Events
Authenticate::redirectTo() — Method in class Authenticate

Get the path the user should be redirected to when they are not authenticated.

RequirePasswordClass in namespace Illuminate\Auth\Middleware
$ RequirePassword#responseFactoryProperty in class RequirePassword

The response factory instance.

ResetPasswordClass in namespace Illuminate\Auth\Notifications
ResetPassword::resetUrl() — Method in class ResetPassword

Get the reset URL for the given notifiable.

DatabaseTokenRepository::recentlyCreatedToken() — Method in class DatabaseTokenRepository

Determine if the given user recently created a password reset token.

PasswordBroker::reset() — Method in class PasswordBroker

Reset the password for the given token.

PasswordBrokerManager::resolve() — Method in class PasswordBrokerManager

Resolve the given broker.

PasswordResetServiceProvider::register() — Method in class PasswordResetServiceProvider

Register the service provider.

PasswordResetServiceProvider::registerPasswordBroker() — Method in class PasswordResetServiceProvider

Register the password broker instance.

TokenRepositoryInterface::recentlyCreatedToken() — Method in class TokenRepositoryInterface

Determine if the given user recently created a password reset token.

RecallerClass in namespace Illuminate\Auth
$ Recaller#recallerProperty in class Recaller

The "recaller" / "remember me" cookie string.

RequestGuardClass in namespace Illuminate\Auth
$ RequestGuard#requestProperty in class RequestGuard

The request instance.

$ SessionGuard#rememberDurationProperty in class SessionGuard

The number of minutes that the "remember me" cookie should be valid for.

$ SessionGuard#requestProperty in class SessionGuard

The request instance.

$ SessionGuard#recallAttemptedProperty in class SessionGuard

Indicates if a token user retrieval has been attempted.

SessionGuard::recaller() — Method in class SessionGuard

Get the decrypted recaller cookie for the request.

SessionGuard::rehashUserPassword() — Method in class SessionGuard

Rehash the current user's password.

$ TokenGuard#requestProperty in class TokenGuard

The request instance.

BroadcastManager::routes() — Method in class BroadcastManager

Register the routes for handling broadcast channel authentication and sockets.

BroadcastManager::resolve() — Method in class BroadcastManager

Resolve the given broadcaster.

BroadcastServiceProvider::register() — Method in class BroadcastServiceProvider

Register the service provider.

Broadcaster::resolveAuthenticatedUser() — Method in class Broadcaster

Resolve the authenticated user payload for the incoming connection request.

Broadcaster::resolveAuthenticatedUserUsing() — Method in class Broadcaster

Register the user retrieval callback used to authenticate connections.

Broadcaster::resolveBinding() — Method in class Broadcaster

Resolve the given parameter binding.

Broadcaster::resolveExplicitBindingIfPossible() — Method in class Broadcaster

Resolve an explicit parameter binding if applicable.

Broadcaster::resolveImplicitBindingIfPossible() — Method in class Broadcaster

Resolve an implicit parameter binding if applicable.

Broadcaster::retrieveUser() — Method in class Broadcaster

Retrieve the authenticated user using the configured guard (if any).

Broadcaster::retrieveChannelOptions() — Method in class Broadcaster

Retrieve options for a certain channel.

PusherBroadcaster::resolveAuthenticatedUser() — Method in class PusherBroadcaster

Resolve the authenticated user payload for an incoming connection request.

RedisBroadcasterClass in namespace Illuminate\Broadcasting\Broadcasters
$ RedisBroadcaster#redisProperty in class RedisBroadcaster

The Redis instance.

$ Batch#repositoryProperty in class Batch

The repository implementation.

Batch::recordSuccessfulJob() — Method in class Batch

Record that a job within the batch finished successfully, executing any callbacks if necessary.

Batch::recordFailedJob() — Method in class Batch

Record that a job within the batch failed to finish successfully, executing any callbacks if necessary.

BusServiceProvider::register() — Method in class BusServiceProvider

Register the service provider.

BusServiceProvider::registerBatchServices() — Method in class BusServiceProvider

Register the batch handling services.

UniqueLock::release() — Method in class UniqueLock

Release the lock for the given job.

ArrayLock::release() — Method in class ArrayLock

Release the lock.

ArrayStore::restoreLock() — Method in class ArrayStore

Restore a lock instance using the owner identifier.

CacheLock::release() — Method in class CacheLock

Release the lock.

CacheManager::resolve() — Method in class CacheManager

Resolve the given store.

CacheManager::repository() — Method in class CacheManager

Create a new cache repository with the given implementation.

CacheManager::refreshEventDispatcher() — Method in class CacheManager

Re-set the event dispatcher on all resolved cache repositories.

CacheServiceProvider::register() — Method in class CacheServiceProvider

Register the service provider.

DatabaseLock::release() — Method in class DatabaseLock

Release the lock.

DatabaseStore::restoreLock() — Method in class DatabaseStore

Restore a lock instance using the owner identifier.

DynamoDbLock::release() — Method in class DynamoDbLock

Release the lock.

DynamoDbStore::restoreLock() — Method in class DynamoDbStore

Restore a lock instance using the owner identifier.

FileStore::restoreLock() — Method in class FileStore

Restore a lock instance using the owner identifier.

HasCacheLock::restoreLock() — Method in class HasCacheLock

Restore a lock instance using the owner identifier.

Lock::release() — Method in class Lock

Release the lock.

LuaScripts::releaseLock() — Method in class LuaScripts

Get the Lua script to atomically release a lock.

MemcachedLock::release() — Method in class MemcachedLock

Release the lock.

MemcachedStore::restoreLock() — Method in class MemcachedStore

Restore a lock instance using the owner identifier.

NoLock::release() — Method in class NoLock

Release the lock.

NullStore::restoreLock() — Method in class NullStore

Restore a lock instance using the owner identifier.

PhpRedisLock::release() — Method in class PhpRedisLock

Release the lock.

RateLimiterClass in namespace Illuminate\Cache
RateLimiter::resetAttempts() — Method in class RateLimiter

Reset the number of attempts for the given key.

RateLimiter::remaining() — Method in class RateLimiter

Get the number of retries left for the given key.

RateLimiter::retriesLeft() — Method in class RateLimiter

Get the number of retries left for the given key.

$ Limit#responseCallbackProperty in class Limit

The response generator callback.

Limit::response() — Method in class Limit

Set the callback that should generate the response when the limit is exceeded.

RedisLockClass in namespace Illuminate\Cache
$ RedisLock#redisProperty in class RedisLock

The Redis factory implementation.

RedisLock::release() — Method in class RedisLock

Release the lock.

RedisStoreClass in namespace Illuminate\Cache
$ RedisStore#redisProperty in class RedisStore

The Redis factory implementation.

RedisStore::restoreLock() — Method in class RedisStore

Restore a lock instance using the owner identifier.

RedisTagSetClass in namespace Illuminate\Cache
RedisTagSet::resetTag() — Method in class RedisTagSet

Reset the tag and return the new tag identifier.

RedisTaggedCacheClass in namespace Illuminate\Cache
RepositoryClass in namespace Illuminate\Cache
Repository::remember() — Method in class Repository
Repository::rememberForever() — Method in class Repository
RetrievesMultipleKeysClass in namespace Illuminate\Cache
TagSet::reset() — Method in class TagSet

Reset all tags in the set.

TagSet::resetTag() — Method in class TagSet

Reset the tag and return the new tag identifier.

RepositoryClass in namespace Illuminate\Config
Application::rerouteSymfonyCommandEvents() — Method in class Application

Re-route the Symfony command events to their Laravel counterparts.

Application::resolve() — Method in class Application

Add a command, resolving through the application.

Application::resolveCommands() — Method in class Application

Resolve an array of commands through the application.

Command::run() — Method in class Command

Run the console command.

Command::resolveCommand() — Method in class Command

Resolve the console command instance for the given command.

CallsCommands::resolveCommand() — Method in class CallsCommands

Resolve the console command instance for the given command.

CallsCommands::runCommand() — Method in class CallsCommands

Run the given the console command.

$ ScheduledTaskFinished#runtimeProperty in class ScheduledTaskFinished

The runtime of the scheduled event.

$ GeneratorCommand#reservedNamesProperty in class GeneratorCommand

Reserved names that cannot be used for generation.

GeneratorCommand::replaceNamespace() — Method in class GeneratorCommand

Replace the namespace for the given stub.

GeneratorCommand::replaceClass() — Method in class GeneratorCommand

Replace the class name for the given stub.

GeneratorCommand::rootNamespace() — Method in class GeneratorCommand

Get the root namespace for the class.

$ CallbackEvent#resultProperty in class CallbackEvent

The result of the callback's execution.

CallbackEvent::run() — Method in class CallbackEvent

Run the callback event.

CallbackEvent::runInBackground() — Method in class CallbackEvent

Indicate that the callback should run in the background.

CallbackEvent::removeMutex() — Method in class CallbackEvent

Clear the mutex for the event.

$ Event#runInBackgroundProperty in class Event

Indicates if the command should run in the background.

$ Event#rejectsProperty in class Event

The array of reject callbacks.

Event::run() — Method in class Event

Run the given event.

Event::runsInMaintenanceMode() — Method in class Event

Determine if the event runs in maintenance mode.

Event::runsInEnvironment() — Method in class Event

Determine if the event runs in the given environment.

Event::runInBackground() — Method in class Event

State that the command should run in the background.

Event::removeMutex() — Method in class Event

Delete the mutex for the event.

ScheduleListCommand::resolveTerminalWidthUsing() — Method in class ScheduleListCommand

Set a callback that should be used when resolving the terminal width.

ScheduleRunCommand::runSingleServerEvent() — Method in class ScheduleRunCommand

Run the given single server event.

ScheduleRunCommand::runEvent() — Method in class ScheduleRunCommand

Run the given event.

$ Signals#registryProperty in class Signals

The signal registry instance.

Signals::register() — Method in class Signals

Register a new signal handler.

Signals::resolveAvailabilityUsing() — Method in class Signals
Alert::render() — Method in class Alert

Renders the component using the given arguments.

Ask::render() — Method in class Ask

Renders the component using the given arguments.

AskWithCompletion::render() — Method in class AskWithCompletion

Renders the component using the given arguments.

BulletList::render() — Method in class BulletList

Renders the component using the given arguments.

Choice::render() — Method in class Choice

Renders the component using the given arguments.

Component::renderView() — Method in class Component

Renders the given view.

Confirm::render() — Method in class Confirm

Renders the component using the given arguments.

Error::render() — Method in class Error

Renders the component using the given arguments.

Info::render() — Method in class Info

Renders the component using the given arguments.

Line::render() — Method in class Line

Renders the component using the given arguments.

Task::render() — Method in class Task
TwoColumnDetail::render() — Method in class TwoColumnDetail

Renders the component using the given arguments.

Warn::render() — Method in class Warn

Renders the component using the given arguments.

$ Container#resolvedProperty in class Container

An array of the types that have been resolved.

$ Container#reboundCallbacksProperty in class Container

All of the registered rebound callbacks.

$ Container#resolvingCallbacksProperty in class Container

All of the resolving callbacks by class type.

Container::resolved() — Method in class Container

Determine if the given abstract type has been resolved.

Container::removeAbstractAlias() — Method in class Container

Remove an alias from the contextual binding alias cache.

Container::rebinding() — Method in class Container

Bind a new callback to an abstract's rebind event.

Container::refresh() — Method in class Container

Refresh an instance on the given target and method.

Container::rebound() — Method in class Container

Fire the "rebound" callbacks for the given abstract type.

Container::resolve() — Method in class Container

Resolve the given type from the container.

Container::resolveDependencies() — Method in class Container

Resolve all of the dependencies from the ReflectionParameters.

Container::resolvePrimitive() — Method in class Container

Resolve a non-class hinted primitive dependency.

Container::resolveClass() — Method in class Container

Resolve a class based dependency from the container.

Container::resolveVariadicClass() — Method in class Container

Resolve a class based variadic dependency from the container.

Container::resolving() — Method in class Container

Register a new resolving callback.

RewindableGeneratorClass in namespace Illuminate\Container
Gate::resource() — Method in class Gate

Define abilities for a resource.

Gate::raw() — Method in class Gate

Get the raw result from the authorization callback.

PasswordBroker::reset() — Method in class PasswordBroker

Reset the password for the given token.

UserProvider::retrieveById() — Method in class UserProvider

Retrieve a user by their unique identifier.

UserProvider::retrieveByToken() — Method in class UserProvider

Retrieve a user by their unique identifier and "remember me" token.

UserProvider::retrieveByCredentials() — Method in class UserProvider

Retrieve a user by the given credentials.

Lock::release() — Method in class Lock

Release the lock.

LockProvider::restoreLock() — Method in class LockProvider

Restore a lock instance using the owner identifier.

RepositoryClass in namespace Illuminate\Contracts\Cache
Repository::remember() — Method in class Repository
Repository::rememberForever() — Method in class Repository
RepositoryClass in namespace Illuminate\Contracts\Config
Container::resolved() — Method in class Container

Determine if the given abstract type has been resolved.

Container::resolving() — Method in class Container

Register a new resolving callback.

$ ModelIdentifier#relationsProperty in class ModelIdentifier

The relationships loaded on the model.

ExceptionHandler::report() — Method in class ExceptionHandler

Report or log an exception.

ExceptionHandler::render() — Method in class ExceptionHandler

Render an exception into an HTTP response.

ExceptionHandler::renderForConsole() — Method in class ExceptionHandler

Render an exception to the console.

Filesystem::readStream() — Method in class Filesystem

Get a resource to read the file.

Application::resourcePath() — Method in class Application

Get the path to the resources directory.

Application::runningInConsole() — Method in class Application

Determine if the application is running in the console.

Application::runningUnitTests() — Method in class Application

Determine if the application is running unit tests.

Application::registerConfiguredProviders() — Method in class Application

Register all of the configured providers.

Application::register() — Method in class Application

Register a service provider with the application.

Application::registerDeferredProvider() — Method in class Application

Register a deferred provider and service.

Application::resolveProvider() — Method in class Application

Resolve a service provider instance from the class name.

CachesRoutes::routesAreCached() — Method in class CachesRoutes

Determine if the application routes are cached.

ExceptionRenderer::render() — Method in class ExceptionRenderer

Renders the given exception as HTML.

Mailer::raw() — Method in class Mailer

Send a new message with only a raw text part.

CursorPaginator::render() — Method in class CursorPaginator

Render the paginator using a given view.

Paginator::render() — Method in class Paginator

Render the paginator using a given view.

InvokedProcess::running() — Method in class InvokedProcess

Determine if the process is still running.

EntityResolver::resolve() — Method in class EntityResolver

Resolve the entity for the given ID.

Job::release() — Method in class Job

Release the job back into the queue after (n) seconds.

Job::retryUntil() — Method in class Job

Get the timestamp indicating when the job should timeout.

Job::resolveName() — Method in class Job

Get the resolved name of the queued job class.

RegistrarClass in namespace Illuminate\Contracts\Routing
Registrar::resource() — Method in class Registrar

Route a resource to a controller.

ResponseFactoryClass in namespace Illuminate\Contracts\Routing
ResponseFactory::redirectTo() — Method in class ResponseFactory

Create a new redirect response to the given path.

ResponseFactory::redirectToRoute() — Method in class ResponseFactory

Create a new redirect response to a named route.

ResponseFactory::redirectToAction() — Method in class ResponseFactory

Create a new redirect response to a controller action.

ResponseFactory::redirectGuest() — Method in class ResponseFactory

Create a new redirect response, while putting the current URL in the session.

ResponseFactory::redirectToIntended() — Method in class ResponseFactory

Create a new redirect response to the previously intended location.

UrlGenerator::route() — Method in class UrlGenerator

Get the URL to a named route.

UrlRoutable::resolveRouteBinding() — Method in class UrlRoutable

Retrieve the model for a bound value.

UrlRoutable::resolveChildRouteBinding() — Method in class UrlRoutable

Retrieve the child model for a bound value.

Session::regenerateToken() — Method in class Session

Regenerate the CSRF token value.

Session::remove() — Method in class Session

Remove an item from the session, returning its value.

Session::regenerate() — Method in class Session

Generate a new session identifier.

DeferringDisplayableValue::resolveDisplayableValue() — Method in class DeferringDisplayableValue

Resolve the displayable value that the class is deferring.

RenderableClass in namespace Illuminate\Contracts\Support
Renderable::render() — Method in class Renderable

Get the evaluated contents of the object.

ResponsableClass in namespace Illuminate\Contracts\Support
Factory::replacer() — Method in class Factory

Register a custom implicit validator message replacer.

RuleClass in namespace Illuminate\Contracts\Validation
Factory::replaceNamespace() — Method in class Factory

Replace the namespace hints for the given namespace.

CookieServiceProvider::register() — Method in class CookieServiceProvider

Register the service provider.

CookieValuePrefix::remove() — Method in class CookieValuePrefix

Remove the cookie value prefix.

ManagesTransactions::rollBack() — Method in class ManagesTransactions

Rollback the active database transaction.

$ Connection#readPdoProperty in class Connection

The active PDO connection used for reads.

$ Connection#readWriteTypeProperty in class Connection

The type of the connection.

$ Connection#reconnectorProperty in class Connection

The reconnector instance for the connection.

$ Connection#recordsModifiedProperty in class Connection

Indicates if changes have been made to the database.

$ Connection#readOnWriteConnectionProperty in class Connection

Indicates if the connection should use the "write" PDO connection.

$ Connection#resolversProperty in class Connection

The connection resolvers.

Connection::run() — Method in class Connection

Run a SQL statement and log its execution context.

Connection::runQueryCallback() — Method in class Connection

Run a SQL statement.

Connection::resetTotalQueryDuration() — Method in class Connection

Reset the duration of all run queries.

Connection::reconnect() — Method in class Connection

Reconnect to the database.

Connection::reconnectIfMissingConnection() — Method in class Connection

Reconnect to the database if a PDO connection is missing.

Connection::raw() — Method in class Connection

Get a new raw query expression.

Connection::recordsHaveBeenModified() — Method in class Connection

Indicate if any records have been modified.

Connection::registerDoctrineType() — Method in class Connection

Register a custom Doctrine mapping type.

Connection::resolverFor() — Method in class Connection

Register a connection resolver.

ConnectionInterface::raw() — Method in class ConnectionInterface

Get a new raw query expression.

ConnectionInterface::rollBack() — Method in class ConnectionInterface

Rollback the active database transaction.

DatabaseInspectionCommand::registerTypeMappings() — Method in class DatabaseInspectionCommand

Register the custom Doctrine type mappings for inspection commands.

FactoryMakeCommand::resolveStubPath() — Method in class FactoryMakeCommand

Resolve the fully-qualified path to the stub.

FreshCommand::runSeeder() — Method in class FreshCommand

Run the database seeder command.

$ InstallCommand#repositoryProperty in class InstallCommand

The repository instance.

MigrateCommand::repositoryExists() — Method in class MigrateCommand

Determine if the migrator repository exists.

RefreshCommandClass in namespace Illuminate\Database\Console\Migrations
RefreshCommand::runRollback() — Method in class RefreshCommand

Run the rollback command.

RefreshCommand::runReset() — Method in class RefreshCommand

Run the reset command.

RefreshCommand::runSeeder() — Method in class RefreshCommand

Run the database seeder command.

ResetCommandClass in namespace Illuminate\Database\Console\Migrations
RollbackCommandClass in namespace Illuminate\Database\Console\Migrations
$ SeedCommand#resolverProperty in class SeedCommand

The connection resolver instance.

SeederMakeCommand::resolveStubPath() — Method in class SeederMakeCommand

Resolve the fully-qualified path to the stub.

SeederMakeCommand::rootNamespace() — Method in class SeederMakeCommand

Get the root namespace for the class.

$ ShowModelCommand#relationMethodsProperty in class ShowModelCommand

The methods that can be called in a model to indicate a relation.

$ DatabaseManager#reconnectorProperty in class DatabaseManager

The callback to be executed to reconnect to a database.

DatabaseManager::registerConfiguredDoctrineTypes() — Method in class DatabaseManager

Register custom Doctrine types with the connection.

DatabaseManager::registerDoctrineType() — Method in class DatabaseManager

Register a custom Doctrine type.

DatabaseManager::reconnect() — Method in class DatabaseManager

Reconnect to the given database.

DatabaseManager::refreshPdoConnections() — Method in class DatabaseManager

Refresh the PDO connections on a given connection.

DatabaseServiceProvider::register() — Method in class DatabaseServiceProvider

Register the service provider.

DatabaseServiceProvider::registerConnectionServices() — Method in class DatabaseServiceProvider

Register the primary database bindings.

DatabaseServiceProvider::registerEloquentFactory() — Method in class DatabaseServiceProvider

Register the Eloquent factory instance in the container.

DatabaseServiceProvider::registerQueueableEntityResolver() — Method in class DatabaseServiceProvider

Register the queueable entity resolver implementation.

DatabaseTransactionsManager::rollback() — Method in class DatabaseTransactionsManager

Rollback the active database transaction.

$ Builder#removedScopesProperty in class Builder

Removed global scopes.

Builder::removedScopes() — Method in class Builder

Get an array of global scopes that were removed from the query.

Builder::relationsNestedUnder() — Method in class Builder

Get the deeply nested relations for a given top-level relation.

Builder::registerMixin() — Method in class Builder

Register the given mixin with the builder.

GuardsAttributes::reguard() — Method in class GuardsAttributes

Enable the mass assignment restrictions.

HasAttributes::relationsToArray() — Method in class HasAttributes

Get the model's relationships in array form.

HasAttributes::resolveCasterClass() — Method in class HasAttributes

Resolve the custom caster class for a given key.

HasEvents::registerObserver() — Method in class HasEvents

Register a single observer with the model.

HasEvents::removeObservableEvents() — Method in class HasEvents

Remove an observable event name.

HasEvents::registerModelEvent() — Method in class HasEvents

Register a model event with the dispatcher.

HasEvents::retrieved() — Method in class HasEvents

Register a retrieved model event with the dispatcher.

HasEvents::replicating() — Method in class HasEvents

Register a replicating model event with the dispatcher.

$ HasRelationships#relationsProperty in class HasRelationships

The loaded relationships for the model.

$ HasRelationships#relationResolversProperty in class HasRelationships

The relation resolver callbacks.

HasRelationships::relationResolver() — Method in class HasRelationships

Get the dynamic relation resolver if defined or inherited, or return null.

HasRelationships::resolveRelationUsing() — Method in class HasRelationships

Define a dynamic relation resolver.

HasRelationships::relationLoaded() — Method in class HasRelationships

Determine if the given relation is loaded.

HasUlids::resolveRouteBindingQuery() — Method in class HasUlids

Retrieve the model for a bound value.

HasUuids::resolveRouteBindingQuery() — Method in class HasUuids

Retrieve the model for a bound value.

QueriesRelationships::requalifyWhereTables() — Method in class QueriesRelationships

Updates the table name for any columns with a new qualified name.

$ BelongsToManyRelationship#relationshipProperty in class BelongsToManyRelationship

The relationship name.

BelongsToManyRelationship::recycle() — Method in class BelongsToManyRelationship

Specify the model instances to always use when creating relationships.

$ BelongsToRelationship#relationshipProperty in class BelongsToRelationship

The relationship name.

$ BelongsToRelationship#resolvedProperty in class BelongsToRelationship

The cached, resolved parent instance ID.

BelongsToRelationship::resolver() — Method in class BelongsToRelationship

Get the deferred resolver for this relationship's parent ID.

BelongsToRelationship::recycle() — Method in class BelongsToRelationship

Specify the model instances to always use when creating relationships.

$ Factory#recycleProperty in class Factory

The model instances to always use when creating relationships.

Factory::raw() — Method in class Factory

Get the raw attributes generated by the factory.

Factory::recycle() — Method in class Factory

Provide model instances to use instead of any nested factory calls when creating relationships.

Factory::resolveFactoryName() — Method in class Factory

Get the factory name for the given model name.

RelationshipClass in namespace Illuminate\Database\Eloquent\Factories
$ Relationship#relationshipProperty in class Relationship

The relationship name.

Relationship::recycle() — Method in class Relationship

Specify the model instances to always use when creating relationships.

$ Model#resolverProperty in class Model

The connection resolver instance.

Model::registerGlobalScopes() — Method in class Model

Register the global scopes for this builder instance.

Model::refresh() — Method in class Model

Reload the current model instance with fresh attributes from the database.

Model::replicate() — Method in class Model

Clone the model into a new, non-existing instance.

Model::replicateQuietly() — Method in class Model

Clone the model into a new, non-existing instance without raising any events.

Model::resolveConnection() — Method in class Model

Resolve a connection instance.

Model::resolveRouteBinding() — Method in class Model

Retrieve the model for a bound value.

Model::resolveSoftDeletableRouteBinding() — Method in class Model

Retrieve the model for a bound value.

Model::resolveChildRouteBinding() — Method in class Model

Retrieve the child model for a bound value.

Model::resolveSoftDeletableChildRouteBinding() — Method in class Model

Retrieve the child model for a bound value.

Model::resolveChildRouteBindingQuery() — Method in class Model

Retrieve the child model query for a bound value.

Model::resolveRouteBindingQuery() — Method in class Model

Retrieve the model for a bound value.

$ PendingHasThroughRelationship#rootModelProperty in class PendingHasThroughRelationship

The root model that the relationship exists on.

QueueEntityResolver::resolve() — Method in class QueueEntityResolver

Resolve the entity for the given ID.

RelationNotFoundExceptionClass in namespace Illuminate\Database\Eloquent
$ RelationNotFoundException#relationProperty in class RelationNotFoundException

The name of the relation.

$ BelongsTo#relationNameProperty in class BelongsTo

The name of the relationship.

BelongsTo::relationHasIncrementingId() — Method in class BelongsTo

Determine if the related model has an auto-incrementing ID.

$ BelongsToMany#relatedPivotKeyProperty in class BelongsToMany

The associated key of the relation.

$ BelongsToMany#relatedKeyProperty in class BelongsToMany

The key name of the related model.

$ BelongsToMany#relationNameProperty in class BelongsToMany

The "name" of the relationship.

BelongsToMany::resolveTableName() — Method in class BelongsToMany

Attempt to resolve the intermediate table name from the given string.

$ AsPivot#relatedKeyProperty in class AsPivot

The name of the "other key" column.

$ CanBeOneOfMany#relationNameProperty in class CanBeOneOfMany

The name of the relationship.

MorphTo::replayMacros() — Method in class MorphTo

Replay stored macro calls on the actual related instance.

RelationClass in namespace Illuminate\Database\Eloquent\Relations
$ Relation#relatedProperty in class Relation

The related model instance.

$ Relation#requireMorphMapProperty in class Relation

Prevents morph relationships without a morph map.

Relation::rawUpdate() — Method in class Relation

Run a raw update against the base query.

Relation::relatedUpdatedAt() — Method in class Relation

Get the name of the related model's "updated at" column.

Relation::requireMorphMap() — Method in class Relation

Prevent polymorphic relationships from being used without model mappings.

Relation::requiresMorphMap() — Method in class Relation

Determine if polymorphic relationships require explicit model mapping.

SoftDeletes::runSoftDelete() — Method in class SoftDeletes

Perform the actual delete query on this model instance.

SoftDeletes::restore() — Method in class SoftDeletes

Restore a soft-deleted model instance.

SoftDeletes::restoreQuietly() — Method in class SoftDeletes

Restore a soft-deleted model instance without raising any events.

SoftDeletes::restoring() — Method in class SoftDeletes

Register a "restoring" model event callback with the dispatcher.

SoftDeletes::restored() — Method in class SoftDeletes

Register a "restored" model event callback with the dispatcher.

$ LazyLoadingViolationException#relationProperty in class LazyLoadingViolationException

The name of the relation.

MigrationServiceProvider::register() — Method in class MigrationServiceProvider

Register the service provider.

MigrationServiceProvider::registerRepository() — Method in class MigrationServiceProvider

Register the migration repository service.

MigrationServiceProvider::registerMigrator() — Method in class MigrationServiceProvider

Register the migrator service.

MigrationServiceProvider::registerCreator() — Method in class MigrationServiceProvider

Register the migration creator.

MigrationServiceProvider::registerCommands() — Method in class MigrationServiceProvider

Register the given commands.

MigrationServiceProvider::registerMigrateCommand() — Method in class MigrationServiceProvider

Register the command.

MigrationServiceProvider::registerMigrateFreshCommand() — Method in class MigrationServiceProvider

Register the command.

MigrationServiceProvider::registerMigrateInstallCommand() — Method in class MigrationServiceProvider

Register the command.

MigrationServiceProvider::registerMigrateMakeCommand() — Method in class MigrationServiceProvider

Register the command.

MigrationServiceProvider::registerMigrateRefreshCommand() — Method in class MigrationServiceProvider

Register the command.

MigrationServiceProvider::registerMigrateResetCommand() — Method in class MigrationServiceProvider

Register the command.

MigrationServiceProvider::registerMigrateRollbackCommand() — Method in class MigrationServiceProvider

Register the command.

MigrationServiceProvider::registerMigrateStatusCommand() — Method in class MigrationServiceProvider

Register the command.

$ DatabaseMigrationRepository#resolverProperty in class DatabaseMigrationRepository

The database connection resolver instance.

DatabaseMigrationRepository::repositoryExists() — Method in class DatabaseMigrationRepository

Determine if the migration repository exists.

MigrationRepositoryInterface::repositoryExists() — Method in class MigrationRepositoryInterface

Determine if the migration repository exists.

$ Migrator#repositoryProperty in class Migrator

The migration repository implementation.

$ Migrator#resolverProperty in class Migrator

The connection resolver instance.

$ Migrator#requiredPathCacheProperty in class Migrator

The paths that have already been required.

Migrator::run() — Method in class Migrator

Run the pending migrations at a given path.

Migrator::runPending() — Method in class Migrator

Run an array of migrations.

Migrator::runUp() — Method in class Migrator

Run "up" a migration instance.

Migrator::rollback() — Method in class Migrator

Rollback the last migration operation.

Migrator::rollbackMigrations() — Method in class Migrator

Rollback the given migrations.

Migrator::reset() — Method in class Migrator

Rolls all of the currently applied migrations back.

Migrator::resetMigrations() — Method in class Migrator

Reset the given migrations.

Migrator::runDown() — Method in class Migrator

Run "down" a migration instance.

Migrator::runMigration() — Method in class Migrator

Run a migration inside a transaction if the database supports it.

Migrator::runMethod() — Method in class Migrator

Run a migration method on the given connection.

Migrator::resolve() — Method in class Migrator

Resolve a migration instance from a file.

Migrator::resolvePath() — Method in class Migrator

Resolve a migration instance from a migration path.

Migrator::requireFiles() — Method in class Migrator

Require in all the migration files in a given path.

Migrator::resolveConnection() — Method in class Migrator

Resolve the database connection instance.

Migrator::repositoryExists() — Method in class Migrator

Determine if the migration repository exists.

Connection::rollBack() — Method in class Connection

Rollback a database transaction.

SqlServerConnection::rollBack() — Method in class SqlServerConnection

Rollback a database transaction.

Builder::rightJoin() — Method in class Builder

Add a right join to the query.

Builder::rightJoinWhere() — Method in class Builder

Add a "right join where" clause to the query.

Builder::rightJoinSub() — Method in class Builder

Add a subquery right join to the query.

Builder::reorder() — Method in class Builder

Remove all existing orders and optionally add a new order.

Builder::removeExistingOrdersFor() — Method in class Builder

Get an array with all orders with a given column removed.

Builder::rawValue() — Method in class Builder

Get a single expression value from the first result of a query.

Builder::runSelect() — Method in class Builder

Run the query as a "select" statement against the connection.

Builder::runPaginationCountQuery() — Method in class Builder

Run a pagination count query.

Builder::raw() — Method in class Builder

Create a raw database expression.

Grammar::removeLeadingBoolean() — Method in class Grammar

Remove the leading boolean from a statement.

RecordsNotFoundExceptionClass in namespace Illuminate\Database
Blueprint::renameColumn() — Method in class Blueprint

Indicate that the given columns should be renamed.

Blueprint::renameIndex() — Method in class Blueprint

Indicate that the given indexes should be renamed.

Blueprint::rename() — Method in class Blueprint

Rename the table to a given name.

Blueprint::rawIndex() — Method in class Blueprint

Specify a raw index for the table.

Blueprint::rememberToken() — Method in class Blueprint

Adds the remember_token column to the table.

Blueprint::removeColumn() — Method in class Blueprint

Remove a column from the schema blueprint.

$ Builder#resolverProperty in class Builder

The Blueprint resolver callback.

Builder::rename() — Method in class Builder

Rename a table on the schema.

ForeignIdColumnDefinition::references() — Method in class ForeignIdColumnDefinition

Specify which column this foreign ID references on another table.

ForeignKeyDefinition::restrictOnUpdate() — Method in class ForeignKeyDefinition

Indicate that updates should be restricted.

ForeignKeyDefinition::restrictOnDelete() — Method in class ForeignKeyDefinition

Indicate that deletes should be restricted.

ForeignKeyDefinition::references() — Method in class ForeignKeyDefinition
RenameColumnClass in namespace Illuminate\Database\Schema\Grammars
MySqlSchemaState::removeAutoIncrementingState() — Method in class MySqlSchemaState

Remove the auto-incrementing state from the given schema dump.

SQLiteBuilder::refreshDatabaseFile() — Method in class SQLiteBuilder

Empty the database file.

Seeder::resolve() — Method in class Seeder

Resolve an instance of the given seeder class.

EncryptionServiceProvider::register() — Method in class EncryptionServiceProvider

Register the service provider.

EncryptionServiceProvider::registerEncrypter() — Method in class EncryptionServiceProvider

Register the encrypter.

EncryptionServiceProvider::registerSerializableClosureSecurityKey() — Method in class EncryptionServiceProvider

Configure Serializable Closure signing for security.

$ CallQueuedListener#retryUntilProperty in class CallQueuedListener

The timestamp indicating when the job should timeout.

Dispatcher::resolveSubscriber() — Method in class Dispatcher

Resolve the subscriber instance.

Dispatcher::resolveQueue() — Method in class Dispatcher

Get the queue implementation from the resolver.

EventServiceProvider::register() — Method in class EventServiceProvider

Register the service provider.

QueuedClosure::resolve() — Method in class QueuedClosure

Resolve the actual event listener callback.

Filesystem::requireOnce() — Method in class Filesystem

Require the given file once.

Filesystem::replace() — Method in class Filesystem

Write the contents of a file, replacing it atomically if it already exists.

Filesystem::replaceInFile() — Method in class Filesystem

Replace a given string within a given file.

Filesystem::relativeLink() — Method in class Filesystem

Create a relative symlink to the target file or directory.

FilesystemAdapter::response() — Method in class FilesystemAdapter

Create a streamed response for a given file.

FilesystemAdapter::readStream() — Method in class FilesystemAdapter

Get a resource to read the file.

FilesystemAdapter::replaceBaseUrl() — Method in class FilesystemAdapter

Replace the scheme, host and port of the given UriInterface with values from the given URL.

FilesystemManager::resolve() — Method in class FilesystemManager

Resolve the given disk.

FilesystemServiceProvider::register() — Method in class FilesystemServiceProvider

Register the service provider.

FilesystemServiceProvider::registerNativeFilesystem() — Method in class FilesystemServiceProvider

Register the native filesystem implementation.

FilesystemServiceProvider::registerFlysystem() — Method in class FilesystemServiceProvider

Register the driver based filesystem.

FilesystemServiceProvider::registerManager() — Method in class FilesystemServiceProvider

Register the filesystem manager.

LockableFile::read() — Method in class LockableFile

Read the file contents.

LockableFile::releaseLock() — Method in class LockableFile

Release the lock on the file.

$ AliasLoader#registeredProperty in class AliasLoader

Indicates if a loader has been registered.

AliasLoader::register() — Method in class AliasLoader

Register the loader on the auto-loader stack.

Application::registerBaseBindings() — Method in class Application

Register the basic bindings into the container.

Application::registerBaseServiceProviders() — Method in class Application

Register all of the base service providers.

Application::resourcePath() — Method in class Application

Get the path to the resources directory.

Application::runningInConsole() — Method in class Application

Determine if the application is running in the console.

Application::runningUnitTests() — Method in class Application

Determine if the application is running unit tests.

Application::registerConfiguredProviders() — Method in class Application

Register all of the configured providers.

Application::register() — Method in class Application

Register a service provider with the application.

Application::resolveProvider() — Method in class Application

Resolve a service provider instance from the class name.

Application::registerDeferredProvider() — Method in class Application

Register a deferred provider and service.

Application::resolve() — Method in class Application

Resolve the given type from the container.

Application::routesAreCached() — Method in class Application

Determine if the application routes are cached.

Application::registerCoreContainerAliases() — Method in class Application

Register the core class aliases in the container.

AuthorizesRequests::resourceAbilityMap() — Method in class AuthorizesRequests

Get the map of resource methods to ability names.

AuthorizesRequests::resourceMethodsWithoutModels() — Method in class AuthorizesRequests

Get the list of resource methods which do not have model parameters.

EmailVerificationRequest::rules() — Method in class EmailVerificationRequest

Get the validation rules that apply to the request.

$ HandleExceptions#reservedMemoryProperty in class HandleExceptions

Reserved memory so that errors can be displayed properly on memory exhaustion.

HandleExceptions::renderForConsole() — Method in class HandleExceptions

Render an exception to the console.

HandleExceptions::renderHttpResponse() — Method in class HandleExceptions

Render an exception as an HTTP response and send it.

RegisterFacadesClass in namespace Illuminate\Foundation\Bootstrap
RegisterProvidersClass in namespace Illuminate\Foundation\Bootstrap
ResolvesDumpSourceClass in namespace Illuminate\Foundation\Concerns
ResolvesDumpSource::resolveDumpSource() — Method in class ResolvesDumpSource

Resolve the source of the dump call.

ResolvesDumpSource::resolveSourceHref() — Method in class ResolvesDumpSource

Resolve the source href, if possible.

ResolvesDumpSource::resolveDumpSourceUsing() — Method in class ResolvesDumpSource
CastMakeCommand::resolveStubPath() — Method in class CastMakeCommand

Resolve the fully-qualified path to the stub.

ChannelListCommand::resolveTerminalWidthUsing() — Method in class ChannelListCommand

Set a callback that should be used when resolving the terminal width.

CliDumper::register() — Method in class CliDumper

Create a new CLI dumper instance and register it as the default dumper.

ComponentMakeCommand::resolveStubPath() — Method in class ComponentMakeCommand

Resolve the fully-qualified path to the stub.

ConsoleMakeCommand::replaceClass() — Method in class ConsoleMakeCommand

Replace the class name for the given stub.

DocsCommand::resolvePage() — Method in class DocsCommand

Determine the page to open.

DocsCommand::refreshDocs() — Method in class DocsCommand

Refresh the cached copy of the documentation index.

DownCommand::redirectPath() — Method in class DownCommand

Get the path that users should be redirected to.

EventListCommand::resolveEventsUsing() — Method in class EventListCommand

Set a callback that should be used when resolving the events dispatcher.

EventMakeCommand::resolveStubPath() — Method in class EventMakeCommand

Resolve the fully-qualified path to the stub.

JobMakeCommand::resolveStubPath() — Method in class JobMakeCommand

Resolve the fully-qualified path to the stub.

Kernel::registerCommand() — Method in class Kernel

Register the given command with the console application.

Kernel::reportException() — Method in class Kernel

Report the exception to the exception handler.

Kernel::renderException() — Method in class Kernel

Render the given exception.

MailMakeCommand::resolveStubPath() — Method in class MailMakeCommand

Resolve the fully-qualified path to the stub.

ModelMakeCommand::resolveStubPath() — Method in class ModelMakeCommand

Resolve the fully-qualified path to the stub.

NotificationMakeCommand::resolveStubPath() — Method in class NotificationMakeCommand

Resolve the fully-qualified path to the stub.

ObserverMakeCommand::replaceModel() — Method in class ObserverMakeCommand

Replace the model for the given stub.

ObserverMakeCommand::resolveStubPath() — Method in class ObserverMakeCommand

Resolve the fully-qualified path to the stub.

PolicyMakeCommand::replaceUserNamespace() — Method in class PolicyMakeCommand

Replace the User model namespace.

PolicyMakeCommand::replaceModel() — Method in class PolicyMakeCommand

Replace the model for the given stub.

PolicyMakeCommand::resolveStubPath() — Method in class PolicyMakeCommand

Resolve the fully-qualified path to the stub.

ProviderMakeCommand::resolveStubPath() — Method in class ProviderMakeCommand

Resolve the fully-qualified path to the stub.

RequestMakeCommandClass in namespace Illuminate\Foundation\Console
RequestMakeCommand::resolveStubPath() — Method in class RequestMakeCommand

Resolve the fully-qualified path to the stub.

ResourceMakeCommandClass in namespace Illuminate\Foundation\Console
ResourceMakeCommand::resolveStubPath() — Method in class ResourceMakeCommand

Resolve the fully-qualified path to the stub.

RouteCacheCommandClass in namespace Illuminate\Foundation\Console
RouteClearCommandClass in namespace Illuminate\Foundation\Console
RouteListCommandClass in namespace Illuminate\Foundation\Console
$ RouteListCommand#routerProperty in class RouteListCommand

The router instance.

RouteListCommand::resolveTerminalWidthUsing() — Method in class RouteListCommand

Set a callback that should be used when resolving the terminal width.

RuleMakeCommandClass in namespace Illuminate\Foundation\Console
ScopeMakeCommand::resolveStubPath() — Method in class ScopeMakeCommand

Resolve the fully-qualified path to the stub.

$ ServeCommand#requestsPoolProperty in class ServeCommand

The list of requests being handled and their start time.

TestMakeCommand::resolveStubPath() — Method in class TestMakeCommand

Resolve the fully-qualified path to the stub.

TestMakeCommand::rootNamespace() — Method in class TestMakeCommand

Get the root namespace for the class.

$ Handler#reportCallbacksProperty in class Handler

The callbacks that should be used during reporting.

$ Handler#renderCallbacksProperty in class Handler

The callbacks that should be used during rendering.

Handler::register() — Method in class Handler

Register the exception handling callbacks for the application.

Handler::reportable() — Method in class Handler

Register a reportable callback.

Handler::renderable() — Method in class Handler

Register a renderable callback.

Handler::report() — Method in class Handler

Report or log an exception.

Handler::render() — Method in class Handler

Render an exception into an HTTP response.

Handler::renderViaCallbacks() — Method in class Handler

Try to render a response from request and exception via render callbacks.

Handler::renderExceptionResponse() — Method in class Handler

Render a default exception response if any.

Handler::renderExceptionContent() — Method in class Handler

Get the response content for the given exception.

Handler::renderExceptionWithCustomRenderer() — Method in class Handler

Render an exception to a string using the registered ExceptionRenderer.

Handler::renderExceptionWithSymfony() — Method in class Handler

Render an exception to a string using Symfony.

Handler::renderHttpException() — Method in class Handler

Render the given HttpException.

Handler::registerErrorViewPaths() — Method in class Handler

Register the error template hint paths.

Handler::renderForConsole() — Method in class Handler

Render an exception to the console.

RegisterErrorViewPathsClass in namespace Illuminate\Foundation\Exceptions
ReportableHandlerClass in namespace Illuminate\Foundation\Exceptions
WhoopsExceptionRenderer::render() — Method in class WhoopsExceptionRenderer

Renders the given exception as HTML.

WhoopsHandler::registerApplicationPaths() — Method in class WhoopsHandler

Register the application paths with the handler.

WhoopsHandler::registerBlacklist() — Method in class WhoopsHandler

Register the blacklist with the handler.

WhoopsHandler::registerEditor() — Method in class WhoopsHandler

Register the editor with the handler.

RequestHandledClass in namespace Illuminate\Foundation\Http\Events
$ RequestHandled#requestProperty in class RequestHandled

The request instance.

$ RequestHandled#responseProperty in class RequestHandled

The response instance.

$ FormRequest#redirectorProperty in class FormRequest

The redirector instance.

$ FormRequest#redirectProperty in class FormRequest

The URI to redirect to if validation fails.

$ FormRequest#redirectRouteProperty in class FormRequest

The route to redirect to if validation fails.

$ FormRequest#redirectActionProperty in class FormRequest

The controller action to redirect to if validation fails.

HtmlDumper::register() — Method in class HtmlDumper

Create a new HTML dumper instance and register it as the default dumper.

$ Kernel#routerProperty in class Kernel

The router instance.

$ Kernel#routeMiddlewareProperty in class Kernel

The application's route middleware.

$ Kernel#requestLifecycleDurationHandlersProperty in class Kernel

All of the registered request duration handlers.

$ Kernel#requestStartedAtProperty in class Kernel

When the kernel starting handling the current request.

Kernel::requestStartedAt() — Method in class Kernel

When the request being handled started.

Kernel::reportException() — Method in class Kernel

Report the exception to the exception handler.

Kernel::renderException() — Method in class Kernel

Render the exception to a response.

VerifyCsrfToken::runningUnitTests() — Method in class VerifyCsrfToken

Determine if the application is running unit tests.

ProviderRepository::registerLoadEvents() — Method in class ProviderRepository

Register the load events for the given provider.

ArtisanServiceProvider::register() — Method in class ArtisanServiceProvider

Register the service provider.

ArtisanServiceProvider::registerCommands() — Method in class ArtisanServiceProvider

Register the given commands.

ArtisanServiceProvider::registerAboutCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerCacheClearCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerCacheForgetCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerCacheTableCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerCastMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerChannelMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerComponentMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerConfigCacheCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerConfigClearCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerConsoleMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerControllerMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerEventMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerExceptionMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerFactoryMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerEventClearCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerJobMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerListenerMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerMailMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerMiddlewareMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerModelMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerNotificationMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerNotificationTableCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerObserverMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerPolicyMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerProviderMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueueForgetCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueueListenCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueueMonitorCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueuePruneBatchesCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueuePruneFailedJobsCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueueRestartCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueueWorkCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueueFailedTableCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueueTableCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerQueueBatchesTableCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerRequestMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerResourceMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerRuleMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerScopeMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerSeederMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerSessionTableCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerRouteCacheCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerRouteClearCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerRouteListCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerSeedCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerTestMakeCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerVendorPublishCommand() — Method in class ArtisanServiceProvider

Register the command.

ArtisanServiceProvider::registerViewClearCommand() — Method in class ArtisanServiceProvider

Register the command.

ComposerServiceProvider::register() — Method in class ComposerServiceProvider

Register the service provider.

FormRequestServiceProvider::register() — Method in class FormRequestServiceProvider

Register the service provider.

FoundationServiceProvider::register() — Method in class FoundationServiceProvider

Register the service provider.

FoundationServiceProvider::registerDumper() — Method in class FoundationServiceProvider

Register an var dumper (with source) to debug variables.

FoundationServiceProvider::registerRequestValidation() — Method in class FoundationServiceProvider

Register the "validate" macro on the request.

FoundationServiceProvider::registerRequestSignatureValidation() — Method in class FoundationServiceProvider

Register the "hasValidSignature" macro on the request.

FoundationServiceProvider::registerExceptionTracking() — Method in class FoundationServiceProvider

Register an event listener to track logged exceptions.

FoundationServiceProvider::registerMaintenanceModeManager() — Method in class FoundationServiceProvider

Register the maintenance mode manager service.

AuthServiceProvider::register() — Method in class AuthServiceProvider

Register the application's policies.

AuthServiceProvider::registerPolicies() — Method in class AuthServiceProvider

Register the application's policies.

EventServiceProvider::register() — Method in class EventServiceProvider

Register the application's event listeners.

RouteServiceProviderClass in namespace Illuminate\Foundation\Support\Providers
RouteServiceProvider::register() — Method in class RouteServiceProvider

Register any application services.

RouteServiceProvider::routes() — Method in class RouteServiceProvider

Register the callback that will be used to load the application's routes.

RouteServiceProvider::routesAreCached() — Method in class RouteServiceProvider

Determine if the application routes are cached.

InteractsWithExceptionHandling::report() — Method in class InteractsWithExceptionHandling

Report or log an exception.

InteractsWithExceptionHandling::render() — Method in class InteractsWithExceptionHandling

Render an exception into an HTTP response.

InteractsWithExceptionHandling::renderForConsole() — Method in class InteractsWithExceptionHandling

Render an exception to the console.

InteractsWithRedis::redisDriverProvider() — Method in class InteractsWithRedis

Get redis driver provider.

DatabaseMigrations::runDatabaseMigrations() — Method in class DatabaseMigrations

Define hooks to migrate the database before and after each test.

LazilyRefreshDatabase::refreshDatabase() — Method in class LazilyRefreshDatabase

Define hooks to migrate the database before and after each test.

RefreshDatabaseClass in namespace Illuminate\Foundation\Testing
RefreshDatabase::refreshDatabase() — Method in class RefreshDatabase

Define hooks to migrate the database before and after each test.

RefreshDatabase::refreshInMemoryDatabase() — Method in class RefreshDatabase

Refresh the in-memory database.

RefreshDatabase::refreshTestDatabase() — Method in class RefreshDatabase

Refresh a conventional test database.

RefreshDatabaseStateClass in namespace Illuminate\Foundation\Testing
TestCase::refreshApplication() — Method in class TestCase

Refresh the application instance.

TestCase::runTest() — Method in class TestCase
{@inheritdoc}
Vite::resolveScriptTagAttributes() — Method in class Vite

Resolve the attributes for the chunks generated script tag.

Vite::resolveStylesheetTagAttributes() — Method in class Vite

Resolve the attributes for the chunks generated stylesheet tag.

Vite::resolvePreloadTagAttributes() — Method in class Vite

Resolve the attributes for the chunks generated preload tag.

Vite::reactRefresh() — Method in class Vite

Generate React refresh runtime script.

$ BcryptHasher#roundsProperty in class BcryptHasher

The default cost factor.

HashServiceProvider::register() — Method in class HashServiceProvider

Register the service provider.

DeterminesStatusCode::requestTimeout() — Method in class DeterminesStatusCode

Determine if the response was a 408 "Request Timeout" response.

$ ConnectionFailed#requestProperty in class ConnectionFailed

The request instance.

RequestSendingClass in namespace Illuminate\Http\Client\Events
$ RequestSending#requestProperty in class RequestSending

The request instance.

ResponseReceivedClass in namespace Illuminate\Http\Client\Events
$ ResponseReceived#requestProperty in class ResponseReceived

The request instance.

$ ResponseReceived#responseProperty in class ResponseReceived

The response instance.

$ Factory#recordingProperty in class Factory

Indicates if the factory is recording requests and responses.

$ Factory#recordedProperty in class Factory

The recorded response array.

$ Factory#responseSequencesProperty in class Factory

All created response sequences.

Factory::response() — Method in class Factory

Create a new response instance for use during stubbing.

Factory::record() — Method in class Factory

Begin recording request / response pairs.

Factory::recordRequestResponsePair() — Method in class Factory

Record a request response pair.

Factory::recorded() — Method in class Factory

Get a collection of the request / response pairs matching the given truth test.

$ PendingRequest#retryDelayProperty in class PendingRequest

The number of milliseconds to wait between retries.

$ PendingRequest#retryThrowProperty in class PendingRequest

Whether to throw an exception when all retries fail.

$ PendingRequest#retryWhenCallbackProperty in class PendingRequest

The callback that will determine if the request should be retried.

$ PendingRequest#requestProperty in class PendingRequest

The sent request object, if a request has been made.

PendingRequest::retry() — Method in class PendingRequest

Specify the number of times the request should be attempted.

PendingRequest::requestsReusableClient() — Method in class PendingRequest

Determine if a reusable client is required.

PendingRequest::runBeforeSendingCallbacks() — Method in class PendingRequest

Execute the "before sending" callbacks.

RequestClass in namespace Illuminate\Http\Client
$ Request#requestProperty in class Request

The underlying PSR request.

RequestExceptionClass in namespace Illuminate\Http\Client
$ RequestException#responseProperty in class RequestException

The response instance.

ResponseClass in namespace Illuminate\Http\Client
$ Response#responseProperty in class Response

The underlying PSR response.

Response::reason() — Method in class Response

Get the reason phrase of the response.

Response::redirect() — Method in class Response

Determine if the response was a redirect.

ResponseSequenceClass in namespace Illuminate\Http\Client
$ ResponseSequence#responsesProperty in class ResponseSequence

The responses in the sequence.

InteractsWithInput::retrieveItem() — Method in class InteractsWithInput

Retrieve a parameter item from a given source.

$ HttpResponseException#responseProperty in class HttpResponseException

The underlying response instance.

RedirectResponseClass in namespace Illuminate\Http
$ RedirectResponse#requestProperty in class RedirectResponse

The request instance.

RedirectResponse::removeFilesFromInput() — Method in class RedirectResponse

Remove all uploaded files form the given input array.

RequestClass in namespace Illuminate\Http
$ Request#routeResolverProperty in class Request

The route resolver callback.

Request::root() — Method in class Request

Get the root URL for the application.

Request::routeIs() — Method in class Request

Determine if the route name matches a given pattern.

Request::replace() — Method in class Request

Replace the input for the current request.

Request::route() — Method in class Request

Get the route handling the request.

ConditionallyLoadsAttributes::removeMissingValues() — Method in class ConditionallyLoadsAttributes

Remove the missing values from the filtered data.

DelegatesToResource::resolveRouteBinding() — Method in class DelegatesToResource

Retrieve the model for a bound value.

DelegatesToResource::resolveChildRouteBinding() — Method in class DelegatesToResource

Retrieve the model for a bound value.

$ JsonResource#resourceProperty in class JsonResource

The resource instance.

JsonResource::resolve() — Method in class JsonResource

Resolve the resource to an array.

JsonResource::response() — Method in class JsonResource

Transform the resource into an HTTP response.

ResourceCollectionClass in namespace Illuminate\Http\Resources\Json
ResourceResponseClass in namespace Illuminate\Http\Resources\Json
$ ResourceResponse#resourceProperty in class ResourceResponse

The underlying resource.

ResponseClass in namespace Illuminate\Http
ResponseTraitClass in namespace Illuminate\Http
LogManager::resolve() — Method in class LogManager

Resolve the given log instance by name.

LogServiceProvider::register() — Method in class LogServiceProvider

Register the service provider.

$ Attachment#resolverProperty in class Attachment

A callback that attaches the attachment to the mail message.

MailManager::resolve() — Method in class MailManager

Resolve the given mailer.

MailServiceProvider::register() — Method in class MailServiceProvider

Register the service provider.

MailServiceProvider::registerIlluminateMailer() — Method in class MailServiceProvider

Register the Illuminate mailer instance.

MailServiceProvider::registerMarkdownRenderer() — Method in class MailServiceProvider

Register the Markdown renderer instance.

$ Mailable#replyToProperty in class Mailable

The "reply to" recipients of the message.

$ Mailable#rawAttachmentsProperty in class Mailable

The raw attachments for the message.

Mailable::render() — Method in class Mailable

Render the mailable into a view.

Mailable::runCallbacks() — Method in class Mailable

Run the callbacks for the message.

Mailable::replyTo() — Method in class Mailable

Set the "reply to" address of the message.

Mailable::renderForAssertions() — Method in class Mailable

Render the HTML and plain-text version of the mailable into views for assertions.

$ Envelope#replyToProperty in class Envelope

The recipients that should be replied to.

Envelope::replyTo() — Method in class Envelope

Add a "reply to" recipient to the message envelope.

$ Headers#referencesProperty in class Headers

The message IDs that are referenced by the message.

Headers::references() — Method in class Headers

Set the message IDs referenced by this message.

Headers::referencesString() — Method in class Headers

Get the references header as a string.

$ Mailer#replyToProperty in class Mailer

The global reply-to address and name.

$ Mailer#returnPathProperty in class Mailer

The global return path address.

Mailer::raw() — Method in class Mailer

Send a new message with only a raw text part.

Mailer::render() — Method in class Mailer

Render the given message as a view.

Mailer::renderView() — Method in class Mailer

Render the given view.

Markdown::render() — Method in class Markdown

Render the Markdown template into HTML.

Markdown::renderText() — Method in class Markdown

Render the Markdown template into text.

Message::returnPath() — Method in class Message

Set the "return path" of the message.

Message::replyTo() — Method in class Message

Add a "reply to" address to the message.

SendQueuedMailable::retryUntil() — Method in class SendQueuedMailable

Determine the time at which the job should timeout.

$ AnonymousNotifiable#routesProperty in class AnonymousNotifiable

All of the notification routing information.

AnonymousNotifiable::route() — Method in class AnonymousNotifiable

Add routing information to the target.

AnonymousNotifiable::routeNotificationFor() — Method in class AnonymousNotifiable

Get the notification routing information for the given driver.

MailChannel::runCallbacks() — Method in class MailChannel

Run the callbacks for the message.

DatabaseNotification::read() — Method in class DatabaseNotification

Determine if a notification has been read.

$ NotificationSent#responseProperty in class NotificationSent

The channel's response.

HasDatabaseNotifications::readNotifications() — Method in class HasDatabaseNotifications

Get the entity's read notifications.

$ MailMessage#replyToProperty in class MailMessage

The "reply to" information for the message.

$ MailMessage#rawAttachmentsProperty in class MailMessage

The raw attachments for the message.

MailMessage::replyTo() — Method in class MailMessage

Set the "reply to" address of the message.

MailMessage::render() — Method in class MailMessage

Render the mail notification message into an HTML string.

NotificationServiceProvider::register() — Method in class NotificationServiceProvider

Register the service provider.

RoutesNotificationsClass in namespace Illuminate\Notifications
RoutesNotifications::routeNotificationFor() — Method in class RoutesNotifications

Get the notification routing information for the given driver.

SendQueuedNotifications::retryUntil() — Method in class SendQueuedNotifications

Determine the time at which the job should timeout.

AbstractCursorPaginator::resolveCurrentCursor() — Method in class AbstractCursorPaginator

Resolve the current cursor or return the default value.

AbstractPaginator::resolveCurrentPath() — Method in class AbstractPaginator

Resolve the current request path or return the default value.

AbstractPaginator::resolveCurrentPage() — Method in class AbstractPaginator

Resolve the current page or return the default value.

AbstractPaginator::resolveQueryString() — Method in class AbstractPaginator

Resolve the query string or return the default value.

CursorPaginator::render() — Method in class CursorPaginator

Render the paginator using the given view.

LengthAwarePaginator::render() — Method in class LengthAwarePaginator

Render the paginator using the given view.

PaginationServiceProvider::register() — Method in class PaginationServiceProvider

Register the service provider.

PaginationState::resolveUsing() — Method in class PaginationState

Bind the pagination state resolvers using the given application container as a base.

Paginator::render() — Method in class Paginator

Render the paginator using the given view.

PipelineServiceProvider::register() — Method in class PipelineServiceProvider

Register the service provider.

$ ProcessFailedException#resultProperty in class ProcessFailedException

The process result instance.

$ ProcessTimedOutException#resultProperty in class ProcessTimedOutException

The process result instance.

$ Factory#recordingProperty in class Factory

Indicates if the process factory has faked process handlers.

$ Factory#recordedProperty in class Factory

All of the recorded processes.

Factory::result() — Method in class Factory

Create a new fake process response for testing purposes.

Factory::recordIfRecording() — Method in class Factory

Record the given process if processes should be recorded.

Factory::record() — Method in class Factory

Record the given process.

$ FakeInvokedProcess#receivedSignalsProperty in class FakeInvokedProcess

The signals that have been received.

$ FakeInvokedProcess#remainingRunIterationsProperty in class FakeInvokedProcess

The number of times the process should indicate that it is "running".

FakeInvokedProcess::running() — Method in class FakeInvokedProcess

Determine if the process is still running.

$ FakeProcessDescription#runIterationsProperty in class FakeProcessDescription

The number of times the process should indicate that it is "running".

FakeProcessDescription::replaceOutput() — Method in class FakeProcessDescription

Replace the entire output buffer with the given string.

FakeProcessDescription::replaceErrorOutput() — Method in class FakeProcessDescription

Replace the entire error output buffer with the given string.

FakeProcessDescription::runsFor() — Method in class FakeProcessDescription

Specify how many times the "isRunning" method should return "true".

FakeProcessDescription::resolveOutput() — Method in class FakeProcessDescription

Resolve the standard output as a string.

FakeProcessDescription::resolveErrorOutput() — Method in class FakeProcessDescription

Resolve the error output as a string.

InvokedProcess::running() — Method in class InvokedProcess

Determine if the process is still running.

InvokedProcessPool::running() — Method in class InvokedProcessPool

Get the processes in the pool that are still currently running.

PendingProcess::run() — Method in class PendingProcess

Run the process.

PendingProcess::resolveSynchronousFake() — Method in class PendingProcess

Resolve the given fake handler for a synchronous process.

PendingProcess::resolveAsynchronousFake() — Method in class PendingProcess

Resolve the given fake handler for an asynchronous process.

Pool::run() — Method in class Pool

Start and wait for the processes to finish.

$ ProcessPoolResults#resultsProperty in class ProcessPoolResults

The results of the processes.

CallQueuedHandler::resolveHandler() — Method in class CallQueuedHandler

Resolve the handler for the given command.

Manager::registerConnectors() — Method in class Manager

Register the default connectors that the component ships with.

RedisConnectorClass in namespace Illuminate\Queue\Connectors
$ RedisConnector#redisProperty in class RedisConnector

The Redis database instance.

BatchesTableCommand::replaceMigration() — Method in class BatchesTableCommand

Replace the generated migration with the batches job table stub.

FailedTableCommand::replaceMigration() — Method in class FailedTableCommand

Replace the generated migration with the failed job table stub.

RestartCommandClass in namespace Illuminate\Queue\Console
RetryBatchCommandClass in namespace Illuminate\Queue\Console
RetryCommandClass in namespace Illuminate\Queue\Console
RetryCommand::retryJob() — Method in class RetryCommand

Retry the queue job.

RetryCommand::resetAttempts() — Method in class RetryCommand

Reset the payload attempts.

RetryCommand::refreshRetryUntil() — Method in class RetryCommand

Refresh the "retry until" timestamp for the job.

TableCommand::replaceMigration() — Method in class TableCommand

Replace the generated migration with the job table stub.

WorkCommand::runWorker() — Method in class WorkCommand

Run the worker instance.

$ DatabaseQueue#retryAfterProperty in class DatabaseQueue

The expiration time of a job.

DatabaseQueue::release() — Method in class DatabaseQueue

Release a reserved job back onto the queue after (n) seconds.

$ DatabaseFailedJobProvider#resolverProperty in class DatabaseFailedJobProvider

The connection resolver implementation.

$ DatabaseUuidFailedJobProvider#resolverProperty in class DatabaseUuidFailedJobProvider

The connection resolver implementation.

InteractsWithQueue::release() — Method in class InteractsWithQueue

Release the job back into the queue after (n) seconds.

BeanstalkdJob::release() — Method in class BeanstalkdJob

Release the job back into the queue after (n) seconds.

DatabaseJob::release() — Method in class DatabaseJob

Release the job back into the queue after (n) seconds.

$ DatabaseJobRecord#recordProperty in class DatabaseJobRecord

The underlying job record.

$ Job#releasedProperty in class Job

Indicates if the job has been released.

Job::release() — Method in class Job

Release the job back into the queue after (n) seconds.

Job::resolve() — Method in class Job

Resolve the given class.

Job::retryUntil() — Method in class Job

Get the timestamp indicating when the job should timeout.

Job::resolveName() — Method in class Job

Get the resolved name of the queued job class.

JobName::resolve() — Method in class JobName

Get the resolved name of the queued job class.

RedisJobClass in namespace Illuminate\Queue\Jobs
$ RedisJob#redisProperty in class RedisJob

The Redis queue instance.

$ RedisJob#reservedProperty in class RedisJob

The Redis job payload inside the reserved queue.

RedisJob::release() — Method in class RedisJob

Release the job back into the queue after (n) seconds.

SqsJob::release() — Method in class SqsJob

Release the job back into the queue after (n) seconds.

SyncJob::release() — Method in class SyncJob

Release the job back into the queue after (n) seconds.

Listener::runProcess() — Method in class Listener

Run the given process.

LuaScripts::release() — Method in class LuaScripts

Get the Lua script for releasing reserved jobs.

RateLimitedClass in namespace Illuminate\Queue\Middleware
RateLimitedWithRedisClass in namespace Illuminate\Queue\Middleware
$ RateLimitedWithRedis#redisProperty in class RateLimitedWithRedis

The Redis factory implementation.

$ ThrottlesExceptions#retryAfterMinutesProperty in class ThrottlesExceptions

The number of minutes to wait before retrying the job after an exception.

$ ThrottlesExceptionsWithRedis#redisProperty in class ThrottlesExceptionsWithRedis

The Redis factory implementation.

$ WithoutOverlapping#releaseAfterProperty in class WithoutOverlapping

The number of seconds before a job should be available again if no lock was acquired.

WithoutOverlapping::releaseAfter() — Method in class WithoutOverlapping

Set the delay (in seconds) to release the job back to the queue.

Queue::raiseJobQueuedEvent() — Method in class Queue

Raise the job queued event.

QueueManager::resolve() — Method in class QueueManager

Resolve a queue connection.

QueueServiceProvider::register() — Method in class QueueServiceProvider

Register the service provider.

QueueServiceProvider::registerManager() — Method in class QueueServiceProvider

Register the queue manager.

QueueServiceProvider::registerConnection() — Method in class QueueServiceProvider

Register the default queue connection binding.

QueueServiceProvider::registerConnectors() — Method in class QueueServiceProvider

Register the connectors on the queue manager.

QueueServiceProvider::registerNullConnector() — Method in class QueueServiceProvider

Register the Null queue connector.

QueueServiceProvider::registerSyncConnector() — Method in class QueueServiceProvider

Register the Sync queue connector.

QueueServiceProvider::registerDatabaseConnector() — Method in class QueueServiceProvider

Register the database queue connector.

QueueServiceProvider::registerRedisConnector() — Method in class QueueServiceProvider

Register the Redis queue connector.

QueueServiceProvider::registerBeanstalkdConnector() — Method in class QueueServiceProvider

Register the Beanstalkd queue connector.

QueueServiceProvider::registerSqsConnector() — Method in class QueueServiceProvider

Register the Amazon SQS queue connector.

QueueServiceProvider::registerWorker() — Method in class QueueServiceProvider

Register the queue worker.

QueueServiceProvider::registerListener() — Method in class QueueServiceProvider

Register the queue listener.

QueueServiceProvider::registerFailedJobServices() — Method in class QueueServiceProvider

Register the failed job services.

RedisQueueClass in namespace Illuminate\Queue
$ RedisQueue#redisProperty in class RedisQueue

The Redis factory implementation.

$ RedisQueue#retryAfterProperty in class RedisQueue

The expiration time of a job.

RedisQueue::retrieveNextJob() — Method in class RedisQueue

Retrieve the next job from the queue.

SerializesAndRestoresModelIdentifiers::restoreCollection() — Method in class SerializesAndRestoresModelIdentifiers

Restore a queueable collection instance.

SerializesAndRestoresModelIdentifiers::restoreModel() — Method in class SerializesAndRestoresModelIdentifiers

Restore the model from the model identifier instance.

SyncQueue::resolveJob() — Method in class SyncQueue

Resolve a Sync job instance.

SyncQueue::raiseBeforeJobEvent() — Method in class SyncQueue

Raise the before queue job event.

SyncQueue::raiseAfterJobEvent() — Method in class SyncQueue

Raise the after queue job event.

SyncQueue::raiseExceptionOccurredJobEvent() — Method in class SyncQueue

Raise the exception occurred queue job event.

$ Worker#resetScopeProperty in class Worker

The callback used to reset the application's scope.

Worker::registerTimeoutHandler() — Method in class Worker

Register the worker timeout handler.

Worker::resetTimeoutHandler() — Method in class Worker

Reset the worker timeout handler.

Worker::runNextJob() — Method in class Worker

Process the next job on the queue.

Worker::runJob() — Method in class Worker

Process the given job.

Worker::raiseBeforeJobPopEvent() — Method in class Worker

Raise the before job has been popped.

Worker::raiseAfterJobPopEvent() — Method in class Worker

Raise the after job has been popped.

Worker::raiseBeforeJobEvent() — Method in class Worker

Raise the before queue job event.

Worker::raiseAfterJobEvent() — Method in class Worker

Raise the after queue job event.

Worker::raiseExceptionOccurredJobEvent() — Method in class Worker

Raise the exception occurred queue job event.

$ WorkerOptions#restProperty in class WorkerOptions

The number of seconds to rest between jobs.

$ ConcurrencyLimiter#redisProperty in class ConcurrencyLimiter

The Redis factory implementation.

$ ConcurrencyLimiter#releaseAfterProperty in class ConcurrencyLimiter

The number of seconds a slot should be maintained.

ConcurrencyLimiter::release() — Method in class ConcurrencyLimiter

Release the lock.

ConcurrencyLimiter::releaseScript() — Method in class ConcurrencyLimiter

Get the Lua script to atomically release a lock.

$ ConcurrencyLimiterBuilder#releaseAfterProperty in class ConcurrencyLimiterBuilder

The number of seconds to maintain the lock until it is automatically released.

ConcurrencyLimiterBuilder::releaseAfter() — Method in class ConcurrencyLimiterBuilder

Set the number of seconds until the lock will be released.

$ DurationLimiter#remainingProperty in class DurationLimiter

The number of remaining slots.

RedisManagerClass in namespace Illuminate\Redis
RedisManager::resolve() — Method in class RedisManager

Resolve the given connection by name.

RedisManager::resolveCluster() — Method in class RedisManager

Resolve the given cluster connection by name.

RedisServiceProviderClass in namespace Illuminate\Redis
RedisServiceProvider::register() — Method in class RedisServiceProvider

Register the service provider.

AbstractRouteCollection::requestMethodNotAllowed() — Method in class AbstractRouteCollection

Throw a method not allowed HTTP exception.

CallableDispatcher::resolveParameters() — Method in class CallableDispatcher

Resolve the parameters for the callable.

$ CompiledRouteCollection#routesProperty in class CompiledRouteCollection

The dynamically added routes that were added after loading the cached, compiled routes.

$ CompiledRouteCollection#routerProperty in class CompiledRouteCollection

The router instance used by the route.

CompiledRouteCollection::refreshNameLookups() — Method in class CompiledRouteCollection

Refresh the name look-up table.

CompiledRouteCollection::refreshActionLookups() — Method in class CompiledRouteCollection

Refresh the action look-up table.

CompiledRouteCollection::requestWithoutTrailingSlash() — Method in class CompiledRouteCollection

Get a cloned instance of the given request without any trailing slash on the URI.

ControllerMakeCommand::resolveStubPath() — Method in class ControllerMakeCommand

Resolve the fully-qualified path to the stub.

MiddlewareMakeCommand::resolveStubPath() — Method in class MiddlewareMakeCommand

Resolve the fully-qualified path to the stub.

ControllerDispatcher::resolveParameters() — Method in class ControllerDispatcher

Resolve the parameters for the controller.

RouteMatchedClass in namespace Illuminate\Routing\Events
$ RouteMatched#routeProperty in class RouteMatched

The route instance.

$ RouteMatched#requestProperty in class RouteMatched

The request instance.

RoutingClass in namespace Illuminate\Routing\Events
$ Routing#requestProperty in class Routing

The request instance.

StreamedResponseException::render() — Method in class StreamedResponseException

Render the exception.

ImplicitRouteBinding::resolveForRoute() — Method in class ImplicitRouteBinding

Resolve the implicit route bindings for the given route.

ImplicitRouteBinding::resolveBackedEnumsForRoute() — Method in class ImplicitRouteBinding

Resolve the Backed Enums route bindings for the route.

MiddlewareNameResolver::resolve() — Method in class MiddlewareNameResolver

Resolve the middleware name to a class name(s) preserving passed parameters.

$ SubstituteBindings#routerProperty in class SubstituteBindings

The router instance.

ThrottleRequests::resolveMaxAttempts() — Method in class ThrottleRequests

Resolve the number of attempts if the user is authenticated or not.

ThrottleRequests::resolveRequestSignature() — Method in class ThrottleRequests

Resolve request signature.

$ ThrottleRequestsWithRedis#redisProperty in class ThrottleRequestsWithRedis

The Redis factory implementation.

$ ThrottleRequestsWithRedis#remainingProperty in class ThrottleRequestsWithRedis

The number of remaining slots by key.

$ PendingResourceRegistration#registrarProperty in class PendingResourceRegistration

The resource registrar.

$ PendingResourceRegistration#registeredProperty in class PendingResourceRegistration

The resource's registration status.

PendingResourceRegistration::register() — Method in class PendingResourceRegistration

Register the resource route.

$ PendingSingletonResourceRegistration#registrarProperty in class PendingSingletonResourceRegistration

The resource registrar.

$ PendingSingletonResourceRegistration#registeredProperty in class PendingSingletonResourceRegistration

The resource's registration status.

PendingSingletonResourceRegistration::register() — Method in class PendingSingletonResourceRegistration

Register the singleton resource route.

RedirectControllerClass in namespace Illuminate\Routing
RedirectorClass in namespace Illuminate\Routing
Redirector::refresh() — Method in class Redirector

Create a new redirect response to the current URI.

Redirector::route() — Method in class Redirector

Create a new redirect response to a named route.

ResourceRegistrarClass in namespace Illuminate\Routing
$ ResourceRegistrar#routerProperty in class ResourceRegistrar

The router instance.

$ ResourceRegistrar#resourceDefaultsProperty in class ResourceRegistrar

The default actions for a resourceful controller.

ResourceRegistrar::register() — Method in class ResourceRegistrar

Route a resource to a controller.

ResponseFactoryClass in namespace Illuminate\Routing
$ ResponseFactory#redirectorProperty in class ResponseFactory

The redirector instance.

ResponseFactory::redirectTo() — Method in class ResponseFactory

Create a new redirect response to the given path.

ResponseFactory::redirectToRoute() — Method in class ResponseFactory

Create a new redirect response to a named route.

ResponseFactory::redirectToAction() — Method in class ResponseFactory

Create a new redirect response to a controller action.

ResponseFactory::redirectGuest() — Method in class ResponseFactory

Create a new redirect response, while putting the current URL in the session.

ResponseFactory::redirectToIntended() — Method in class ResponseFactory

Create a new redirect response to the previously intended location.

RouteClass in namespace Illuminate\Routing
$ Route#routerProperty in class Route

The router instance used by the route.

Route::run() — Method in class Route

Run the route action and return the response.

Route::runCallable() — Method in class Route

Run the route action and return the response.

Route::runController() — Method in class Route

Run the route action and return the response.

RouteActionClass in namespace Illuminate\Routing
RouteBindingClass in namespace Illuminate\Routing
RouteCollectionClass in namespace Illuminate\Routing
$ RouteCollection#routesProperty in class RouteCollection

An array of the routes keyed by method.

RouteCollection::refreshNameLookups() — Method in class RouteCollection

Refresh the name look-up table.

RouteCollection::refreshActionLookups() — Method in class RouteCollection

Refresh the action look-up table.

RouteCollectionInterfaceClass in namespace Illuminate\Routing
RouteCollectionInterface::refreshNameLookups() — Method in class RouteCollectionInterface

Refresh the name look-up table.

RouteCollectionInterface::refreshActionLookups() — Method in class RouteCollectionInterface

Refresh the action look-up table.

RouteDependencyResolverTraitClass in namespace Illuminate\Routing
RouteDependencyResolverTrait::resolveClassMethodDependencies() — Method in class RouteDependencyResolverTrait

Resolve the object method's type-hinted dependencies.

RouteDependencyResolverTrait::resolveMethodDependencies() — Method in class RouteDependencyResolverTrait

Resolve the given method's type-hinted dependencies.

RouteFileRegistrarClass in namespace Illuminate\Routing
$ RouteFileRegistrar#routerProperty in class RouteFileRegistrar

The router instance.

RouteFileRegistrar::register() — Method in class RouteFileRegistrar

Require the given routes file.

RouteGroupClass in namespace Illuminate\Routing
RouteParameterBinderClass in namespace Illuminate\Routing
$ RouteParameterBinder#routeProperty in class RouteParameterBinder

The route instance.

RouteParameterBinder::replaceDefaults() — Method in class RouteParameterBinder

Replace null parameters with their defaults.

RouteRegistrarClass in namespace Illuminate\Routing
$ RouteRegistrar#routerProperty in class RouteRegistrar

The router instance.

RouteRegistrar::resource() — Method in class RouteRegistrar

Route a resource to a controller.

RouteRegistrar::registerRoute() — Method in class RouteRegistrar

Register a new route with the router.

RouteSignatureParametersClass in namespace Illuminate\Routing
RouteUriClass in namespace Illuminate\Routing
RouteUrlGeneratorClass in namespace Illuminate\Routing
$ RouteUrlGenerator#requestProperty in class RouteUrlGenerator

The request instance.

RouteUrlGenerator::replaceRootParameters() — Method in class RouteUrlGenerator

Replace the parameters on the root path.

RouteUrlGenerator::replaceRouteParameters() — Method in class RouteUrlGenerator

Replace all of the wildcard parameters for a route path.

RouteUrlGenerator::replaceNamedParameters() — Method in class RouteUrlGenerator

Replace all of the named parameters in the path.

RouterClass in namespace Illuminate\Routing
$ Router#routesProperty in class Router

The route collection instance.

Router::redirect() — Method in class Router

Create a redirect from one URI to another.

Router::resources() — Method in class Router

Register an array of resource controllers.

Router::resource() — Method in class Router

Route a resource to a controller.

Router::respondWithRoute() — Method in class Router

Return the response returned by the given route.

Router::runRoute() — Method in class Router

Return the response for the given route.

Router::runRouteWithinStack() — Method in class Router

Run the given route within a Stack "onion" instance.

Router::resolveMiddleware() — Method in class Router

Resolve a flat array of middleware classes from the provided array.

Router::removeMiddlewareFromGroup() — Method in class Router

Remove the given middleware from the specified group.

Router::resourceParameters() — Method in class Router

Set the global resource parameter mapping.

Router::resourceVerbs() — Method in class Router

Get or set the verbs used in the resource URIs.

RoutingServiceProviderClass in namespace Illuminate\Routing
RoutingServiceProvider::register() — Method in class RoutingServiceProvider

Register the service provider.

RoutingServiceProvider::registerRouter() — Method in class RoutingServiceProvider

Register the router instance.

RoutingServiceProvider::registerUrlGenerator() — Method in class RoutingServiceProvider

Register the URL generator service.

RoutingServiceProvider::requestRebinder() — Method in class RoutingServiceProvider

Get the URL generator request rebinder.

RoutingServiceProvider::registerRedirector() — Method in class RoutingServiceProvider

Register the Redirector service.

RoutingServiceProvider::registerPsrRequest() — Method in class RoutingServiceProvider

Register a binding for the PSR-7 request implementation.

RoutingServiceProvider::registerPsrResponse() — Method in class RoutingServiceProvider

Register a binding for the PSR-7 response implementation.

RoutingServiceProvider::registerResponseFactory() — Method in class RoutingServiceProvider

Register the response factory implementation.

RoutingServiceProvider::registerCallableDispatcher() — Method in class RoutingServiceProvider

Register the callable dispatcher.

RoutingServiceProvider::registerControllerDispatcher() — Method in class RoutingServiceProvider

Register the controller dispatcher.

$ UrlGenerator#routesProperty in class UrlGenerator

The route collection.

$ UrlGenerator#requestProperty in class UrlGenerator

The request instance.

$ UrlGenerator#rootNamespaceProperty in class UrlGenerator

The root namespace being applied to controller actions.

$ UrlGenerator#routeGeneratorProperty in class UrlGenerator

The route URL generator instance.

UrlGenerator::removeIndex() — Method in class UrlGenerator

Remove the index.php file from a path.

UrlGenerator::route() — Method in class UrlGenerator

Get the URL to a named route.

UrlGenerator::routeUrl() — Method in class UrlGenerator

Get the Route URL generator instance.

$ ViewController#responseProperty in class ViewController

The response factory implementation.

ArraySessionHandler::read() — Method in class ArraySessionHandler
{@inheritdoc}
CacheBasedSessionHandler::read() — Method in class CacheBasedSessionHandler
{@inheritdoc}
$ CookieSessionHandler#requestProperty in class CookieSessionHandler

The request instance.

CookieSessionHandler::read() — Method in class CookieSessionHandler
{@inheritdoc}
DatabaseSessionHandler::read() — Method in class DatabaseSessionHandler
{@inheritdoc}
FileSessionHandler::read() — Method in class FileSessionHandler
{@inheritdoc}
NullSessionHandler::read() — Method in class NullSessionHandler
{@inheritdoc}
SessionServiceProvider::register() — Method in class SessionServiceProvider

Register the service provider.

SessionServiceProvider::registerSessionManager() — Method in class SessionServiceProvider

Register the session manager instance.

SessionServiceProvider::registerSessionDriver() — Method in class SessionServiceProvider

Register the session driver instance.

Store::readFromHandler() — Method in class Store

Read the session data from the handler.

Store::replace() — Method in class Store

Replace the given session attributes entirely.

Store::remember() — Method in class Store

Get an item from the session, or store the default value.

Store::reflash() — Method in class Store

Reflash all of the session flash data.

Store::removeFromOldFlashData() — Method in class Store

Remove the given keys from the old flash data.

Store::remove() — Method in class Store

Remove an item from the session, returning its value.

Store::regenerate() — Method in class Store

Generate a new session identifier.

Store::regenerateToken() — Method in class Store

Regenerate the CSRF token value.

SymfonySessionDecorator::replace() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::remove() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::registerBag() — Method in class SymfonySessionDecorator
{@inheritdoc}
AggregateServiceProvider::register() — Method in class AggregateServiceProvider

Register the service provider.

Arr::random() — Method in class Arr

Get one or a specified number of random values from an array.

Collection::range() — Method in class Collection
Collection::random() — Method in class Collection
Collection::replace() — Method in class Collection

Replace the collection items with the given items.

Collection::replaceRecursive() — Method in class Collection

Recursively replace the collection items with the given items.

Collection::reverse() — Method in class Collection

Reverse items order.

DateFactory::resetMonthsOverflow() — Method in class DateFactory
DateFactory::resetToStringFormat() — Method in class DateFactory
DateFactory::resetYearsOverflow() — Method in class DateFactory
Enumerable::range() — Method in class Enumerable

Create a collection with the given range.

Enumerable::random() — Method in class Enumerable
Enumerable::reduce() — Method in class Enumerable

Reduce the collection to a single value.

Enumerable::reduceSpread() — Method in class Enumerable

Reduce the collection to multiple aggregate values.

Enumerable::replace() — Method in class Enumerable

Replace the collection items with the given items.

Enumerable::replaceRecursive() — Method in class Enumerable

Recursively replace the collection items with the given items.

Enumerable::reverse() — Method in class Enumerable

Reverse items order.

Enumerable::reject() — Method in class Enumerable

Create a collection of all elements that do not pass a given truth test.

$ Env#repositoryProperty in class Env

The environment repository instance.

App::resourcePath() — Method in class App
App::runningInConsole() — Method in class App
App::runningUnitTests() — Method in class App
App::registerConfiguredProviders() — Method in class App
App::register() — Method in class App
App::resolveProvider() — Method in class App
App::registerDeferredProvider() — Method in class App
App::routesAreCached() — Method in class App
App::registerCoreContainerAliases() — Method in class App
App::rebinding() — Method in class App
App::refresh() — Method in class App
App::resolving() — Method in class App
Artisan::registerCommand() — Method in class Artisan
Auth::routes() — Method in class Auth

Register the typical authentication routes for an application.

Auth::resolveUsersUsing() — Method in class Auth
Blade::render() — Method in class Blade
Blade::renderComponent() — Method in class Blade
Broadcast::routes() — Method in class Broadcast
Broadcast::resolveAuthenticatedUser() — Method in class Broadcast
Broadcast::resolveAuthenticatedUserUsing() — Method in class Broadcast
Bus::recordPendingBatch() — Method in class Bus
Cache::resolve() — Method in class Cache
Cache::repository() — Method in class Cache
Cache::refreshEventDispatcher() — Method in class Cache
Cache::remember() — Method in class Cache
Cache::rememberForever() — Method in class Cache
Cache::restoreLock() — Method in class Cache
DB::registerDoctrineType() — Method in class DB
DB::reconnect() — Method in class DB
DB::resetTotalQueryDuration() — Method in class DB
DB::reconnectIfMissingConnection() — Method in class DB
DB::raw() — Method in class DB
DB::recordsHaveBeenModified() — Method in class DB
DB::resolverFor() — Method in class DB
DB::rollBack() — Method in class DB
Date::resolveFacadeInstance() — Method in class Date

Resolve the facade root instance from the container.

Date::resetMonthsOverflow() — Method in class Date
Date::resetToStringFormat() — Method in class Date
Date::resetYearsOverflow() — Method in class Date
$ Facade#resolvedInstanceProperty in class Facade

The resolved object instances.

Facade::resolved() — Method in class Facade

Run a Closure when the facade has been resolved.

Facade::resolveFacadeInstance() — Method in class Facade

Resolve the facade root instance from the container.

File::requireOnce() — Method in class File
File::replace() — Method in class File
File::replaceInFile() — Method in class File
File::relativeLink() — Method in class File
Gate::resource() — Method in class Gate
Gate::raw() — Method in class Gate
Gate::resolvePolicy() — Method in class Gate
Http::response() — Method in class Http
Http::recordRequestResponsePair() — Method in class Http
Http::recorded() — Method in class Http
Http::retry() — Method in class Http
Http::runBeforeSendingCallbacks() — Method in class Http
Mail::raw() — Method in class Mail
Mail::render() — Method in class Mail
Notification::route() — Method in class Notification

Begin sending a notification to an anonymous notifiable.

ParallelTesting::resolveOptionsUsing() — Method in class ParallelTesting
ParallelTesting::resolveTokenUsing() — Method in class ParallelTesting
Password::reset() — Method in class Password
Process::run() — Method in class Process
Process::result() — Method in class Process
Process::recordIfRecording() — Method in class Process
Process::record() — Method in class Process
RateLimiterClass in namespace Illuminate\Support\Facades
RateLimiter::resetAttempts() — Method in class RateLimiter
RateLimiter::remaining() — Method in class RateLimiter
RateLimiter::retriesLeft() — Method in class RateLimiter
RedirectClass in namespace Illuminate\Support\Facades
Redirect::refresh() — Method in class Redirect
Redirect::route() — Method in class Redirect
RedisClass in namespace Illuminate\Support\Facades
Redis::resolve() — Method in class Redis
RequestClass in namespace Illuminate\Support\Facades
Request::root() — Method in class Request
Request::routeIs() — Method in class Request
Request::replace() — Method in class Request
Request::route() — Method in class Request
ResponseClass in namespace Illuminate\Support\Facades
Response::redirectTo() — Method in class Response
Response::redirectToRoute() — Method in class Response
Response::redirectToAction() — Method in class Response
Response::redirectGuest() — Method in class Response
Response::redirectToIntended() — Method in class Response
RouteClass in namespace Illuminate\Support\Facades
Route::redirect() — Method in class Route
Route::resources() — Method in class Route
Route::resource() — Method in class Route
Route::respondWithRoute() — Method in class Route
Route::resolveMiddleware() — Method in class Route
Route::removeMiddlewareFromGroup() — Method in class Route
Route::resourceParameters() — Method in class Route
Route::resourceVerbs() — Method in class Route
Schema::rename() — Method in class Schema
Session::replace() — Method in class Session
Session::remember() — Method in class Session
Session::reflash() — Method in class Session
Session::remove() — Method in class Session
Session::regenerate() — Method in class Session
Session::regenerateToken() — Method in class Session
Storage::readStream() — Method in class Storage
Storage::response() — Method in class Storage
Storage::read() — Method in class Storage
URL::route() — Method in class URL
Validator::replacer() — Method in class Validator
Validator::resolver() — Method in class Validator
View::renderWhen() — Method in class View
View::renderUnless() — Method in class View
View::renderEach() — Method in class View
View::replaceNamespace() — Method in class View
View::renderComponent() — Method in class View
View::renderTranslation() — Method in class View
Vite::reactRefresh() — Method in class Vite
LazyCollection::range() — Method in class LazyCollection
LazyCollection::remember() — Method in class LazyCollection

Cache values as they're enumerated.

LazyCollection::random() — Method in class LazyCollection
LazyCollection::replace() — Method in class LazyCollection

Replace the collection items with the given items.

LazyCollection::replaceRecursive() — Method in class LazyCollection

Recursively replace the collection items with the given items.

LazyCollection::reverse() — Method in class LazyCollection

Reverse items order.

$ Lottery#resultFactoryProperty in class Lottery

The factory that should be used to generate results.

Lottery::runCallback() — Method in class Lottery

Run the winner or loser callback, randomly.

Lottery::resultFactory() — Method in class Lottery

The factory that determines the lottery result.

MultipleInstanceManager::resolve() — Method in class MultipleInstanceManager

Resolve the given instance.

ReflectorClass in namespace Illuminate\Support
ServiceProvider::register() — Method in class ServiceProvider

Register any application services.

$ Str#randomStringFactoryProperty in class Str

The callback that should be used to generate random strings.

Str::random() — Method in class Str

Generate a more truly "random" alpha-numeric string.

Str::repeat() — Method in class Str

Repeat the given string.

Str::replaceArray() — Method in class Str

Replace a given value in the string sequentially with an array.

Str::replace() — Method in class Str

Replace the given value in the given string.

Str::replaceFirst() — Method in class Str

Replace the first occurrence of a given value in the string.

Str::replaceLast() — Method in class Str

Replace the last occurrence of a given value in the string.

Str::remove() — Method in class Str

Remove any occurrence of the given string in the subject.

Str::reverse() — Method in class Str

Reverse the given string.

Stringable::remove() — Method in class Stringable

Remove any occurrence of the given string in the subject.

Stringable::reverse() — Method in class Stringable

Reverse the string.

Stringable::repeat() — Method in class Stringable

Repeat the string.

Stringable::replace() — Method in class Stringable

Replace the given value in the given string.

Stringable::replaceArray() — Method in class Stringable

Replace a given value in the string sequentially with an array.

Stringable::replaceFirst() — Method in class Stringable

Replace the first occurrence of a given value in the string.

Stringable::replaceLast() — Method in class Stringable

Replace the last occurrence of a given value in the string.

Stringable::replaceMatches() — Method in class Stringable

Replace the patterns matching the given regular expression.

Stringable::rtrim() — Method in class Stringable

Right trim the string of the given characters.

BatchFake::recordSuccessfulJob() — Method in class BatchFake

Record that a job within the batch finished successfully, executing any callbacks if necessary.

BatchFake::recordFailedJob() — Method in class BatchFake

Record that a job within the batch failed to finish successfully, executing any callbacks if necessary.

BusFake::resetChainPropertiesToDefaults() — Method in class BusFake

Reset the chain properties to their default values on the job.

BusFake::recordPendingBatch() — Method in class BusFake

Record the fake pending batch dispatch.

MailFake::raw() — Method in class MailFake

Send a new message with only a raw text part.

Timebox::returnEarly() — Method in class Timebox

Indicate that the timebox can return early.

$ EnumeratesValues#rejectProperty in class EnumeratesValues
EnumeratesValues::reduce() — Method in class EnumeratesValues

Reduce the collection to a single value.

EnumeratesValues::reduceSpread() — Method in class EnumeratesValues

Reduce the collection to multiple aggregate values.

EnumeratesValues::reduceWithKeys() — Method in class EnumeratesValues

Reduce an associative collection to a single value.

EnumeratesValues::reject() — Method in class EnumeratesValues

Create a collection of all elements that do not pass a given truth test.

ReflectsClosuresClass in namespace Illuminate\Support\Traits
AssertableJsonString::reorderAssocKeys() — Method in class AssertableJsonString

Reorder associative array keys to make it easy to compare arrays.

RunsInParallelClass in namespace Illuminate\Testing\Concerns
$ RunsInParallel#runnerResolverProperty in class RunsInParallel

The runner resolver callback.

$ RunsInParallel#runnerProperty in class RunsInParallel

The original test runner.

RunsInParallel::resolveApplicationUsing() — Method in class RunsInParallel

Set the application resolver callback.

RunsInParallel::resolveRunnerUsing() — Method in class RunsInParallel

Set the runner resolver callback.

ParallelRunner::run() — Method in class ParallelRunner

Runs the test suite.

ParallelTesting::resolveOptionsUsing() — Method in class ParallelTesting

Set a callback that should be used when resolving options.

ParallelTesting::resolveTokenUsing() — Method in class ParallelTesting

Set a callback that should be used when resolving the unique process token.

ParallelTestingServiceProvider::register() — Method in class ParallelTestingServiceProvider

Register the service provider.

PendingCommand::run() — Method in class PendingCommand

Execute the command.

$ TestComponent#renderedProperty in class TestComponent

The rendered component contents.

TestResponse::responseHasView() — Method in class TestResponse

Determine if the original response is a view.

$ TestView#renderedProperty in class TestView

The rendered view contents.

TranslationServiceProvider::register() — Method in class TranslationServiceProvider

Register the service provider.

TranslationServiceProvider::registerLoader() — Method in class TranslationServiceProvider

Register the translation line loader.

FormatsMessages::replaceAttributePlaceholder() — Method in class FormatsMessages

Replace the :attribute placeholder in the given message.

FormatsMessages::replaceIndexPlaceholder() — Method in class FormatsMessages

Replace the :index placeholder in the given message.

FormatsMessages::replacePositionPlaceholder() — Method in class FormatsMessages

Replace the :position placeholder in the given message.

FormatsMessages::replaceIndexOrPositionPlaceholder() — Method in class FormatsMessages

Replace the :index or :position placeholder in the given message.

FormatsMessages::replaceInputPlaceholder() — Method in class FormatsMessages

Replace the :input placeholder in the given message.

ReplacesAttributesClass in namespace Illuminate\Validation\Concerns
ReplacesAttributes::replaceAcceptedIf() — Method in class ReplacesAttributes

Replace all place-holders for the accepted_if rule.

ReplacesAttributes::replaceDeclinedIf() — Method in class ReplacesAttributes

Replace all place-holders for the declined_if rule.

ReplacesAttributes::replaceBetween() — Method in class ReplacesAttributes

Replace all place-holders for the between rule.

ReplacesAttributes::replaceDateFormat() — Method in class ReplacesAttributes

Replace all place-holders for the date_format rule.

ReplacesAttributes::replaceDecimal() — Method in class ReplacesAttributes

Replace all place-holders for the decimal rule.

ReplacesAttributes::replaceDifferent() — Method in class ReplacesAttributes

Replace all place-holders for the different rule.

ReplacesAttributes::replaceDigits() — Method in class ReplacesAttributes

Replace all place-holders for the digits rule.

ReplacesAttributes::replaceDigitsBetween() — Method in class ReplacesAttributes

Replace all place-holders for the digits (between) rule.

ReplacesAttributes::replaceMin() — Method in class ReplacesAttributes

Replace all place-holders for the min rule.

ReplacesAttributes::replaceMinDigits() — Method in class ReplacesAttributes

Replace all place-holders for the min digits rule.

ReplacesAttributes::replaceMax() — Method in class ReplacesAttributes

Replace all place-holders for the max rule.

ReplacesAttributes::replaceMaxDigits() — Method in class ReplacesAttributes

Replace all place-holders for the max digits rule.

ReplacesAttributes::replaceMissingIf() — Method in class ReplacesAttributes

Replace all place-holders for the missing_if rule.

ReplacesAttributes::replaceMissingUnless() — Method in class ReplacesAttributes

Replace all place-holders for the missing_unless rule.

ReplacesAttributes::replaceMissingWith() — Method in class ReplacesAttributes

Replace all place-holders for the missing_with rule.

ReplacesAttributes::replaceMissingWithAll() — Method in class ReplacesAttributes

Replace all place-holders for the missing_with_all rule.

ReplacesAttributes::replaceMultipleOf() — Method in class ReplacesAttributes

Replace all place-holders for the multiple_of rule.

ReplacesAttributes::replaceIn() — Method in class ReplacesAttributes

Replace all place-holders for the in rule.

ReplacesAttributes::replaceNotIn() — Method in class ReplacesAttributes

Replace all place-holders for the not_in rule.

ReplacesAttributes::replaceInArray() — Method in class ReplacesAttributes

Replace all place-holders for the in_array rule.

ReplacesAttributes::replaceRequiredArrayKeys() — Method in class ReplacesAttributes

Replace all place-holders for the required_array_keys rule.

ReplacesAttributes::replaceMimetypes() — Method in class ReplacesAttributes

Replace all place-holders for the mimetypes rule.

ReplacesAttributes::replaceMimes() — Method in class ReplacesAttributes

Replace all place-holders for the mimes rule.

ReplacesAttributes::replaceRequiredWith() — Method in class ReplacesAttributes

Replace all place-holders for the required_with rule.

ReplacesAttributes::replaceRequiredWithAll() — Method in class ReplacesAttributes

Replace all place-holders for the required_with_all rule.

ReplacesAttributes::replaceRequiredWithout() — Method in class ReplacesAttributes

Replace all place-holders for the required_without rule.

ReplacesAttributes::replaceRequiredWithoutAll() — Method in class ReplacesAttributes

Replace all place-holders for the required_without_all rule.

ReplacesAttributes::replaceSize() — Method in class ReplacesAttributes

Replace all place-holders for the size rule.

ReplacesAttributes::replaceGt() — Method in class ReplacesAttributes

Replace all place-holders for the gt rule.

ReplacesAttributes::replaceLt() — Method in class ReplacesAttributes

Replace all place-holders for the lt rule.

ReplacesAttributes::replaceGte() — Method in class ReplacesAttributes

Replace all place-holders for the gte rule.

ReplacesAttributes::replaceLte() — Method in class ReplacesAttributes

Replace all place-holders for the lte rule.

ReplacesAttributes::replaceRequiredIf() — Method in class ReplacesAttributes

Replace all place-holders for the required_if rule.

ReplacesAttributes::replaceRequiredIfAccepted() — Method in class ReplacesAttributes

Replace all place-holders for the required_if_accepted rule.

ReplacesAttributes::replaceRequiredUnless() — Method in class ReplacesAttributes

Replace all place-holders for the required_unless rule.

ReplacesAttributes::replaceProhibitedIf() — Method in class ReplacesAttributes

Replace all place-holders for the prohibited_if rule.

ReplacesAttributes::replaceProhibitedUnless() — Method in class ReplacesAttributes

Replace all place-holders for the prohibited_unless rule.

ReplacesAttributes::replaceProhibits() — Method in class ReplacesAttributes

Replace all place-holders for the prohibited_with rule.

ReplacesAttributes::replaceSame() — Method in class ReplacesAttributes

Replace all place-holders for the same rule.

ReplacesAttributes::replaceBefore() — Method in class ReplacesAttributes

Replace all place-holders for the before rule.

ReplacesAttributes::replaceBeforeOrEqual() — Method in class ReplacesAttributes

Replace all place-holders for the before_or_equal rule.

ReplacesAttributes::replaceAfter() — Method in class ReplacesAttributes

Replace all place-holders for the after rule.

ReplacesAttributes::replaceAfterOrEqual() — Method in class ReplacesAttributes

Replace all place-holders for the after_or_equal rule.

ReplacesAttributes::replaceDateEquals() — Method in class ReplacesAttributes

Replace all place-holders for the date_equals rule.

ReplacesAttributes::replaceDimensions() — Method in class ReplacesAttributes

Replace all place-holders for the dimensions rule.

ReplacesAttributes::replaceEndsWith() — Method in class ReplacesAttributes

Replace all place-holders for the ends_with rule.

ReplacesAttributes::replaceDoesntEndWith() — Method in class ReplacesAttributes

Replace all place-holders for the doesnt_end_with rule.

ReplacesAttributes::replaceStartsWith() — Method in class ReplacesAttributes

Replace all place-holders for the starts_with rule.

ReplacesAttributes::replaceDoesntStartWith() — Method in class ReplacesAttributes

Replace all place-holders for the doesnt_start_with rule.

ValidatesAttributes::requireParameterCount() — Method in class ValidatesAttributes

Require a certain number of parameters to be present.

$ ConditionalRules#rulesProperty in class ConditionalRules

The rules to be added to the attribute.

ConditionalRules::rules() — Method in class ConditionalRules

Get the rules.

$ Factory#replacersProperty in class Factory

All of the custom validator message replacers.

$ Factory#resolverProperty in class Factory

The Validator resolver instance.

Factory::resolve() — Method in class Factory

Resolve a new Validator instance.

Factory::replacer() — Method in class Factory

Register a custom validator message replacer.

Factory::resolver() — Method in class Factory

Set the Validator instance resolver.

RuleClass in namespace Illuminate\Validation
Rule::requiredIf() — Method in class Rule

Get a required_if constraint builder instance.

DatabaseRule::resolveTableName() — Method in class DatabaseRule

Resolves the name of the table from the given string.

Dimensions::ratio() — Method in class Dimensions

Set the "ratio" constraint.

File::rules() — Method in class File

Specify additional validation rules that should be merged with the default rules during validation.

$ In#ruleProperty in class In

The name of the rule.

$ NotIn#ruleProperty in class NotIn

The name of the rule.

Password::required() — Method in class Password

Get the default configuration of the password rule and mark the field as required.

Password::rules() — Method in class Password

Specify additional validation rules that should be merged with the default rules during validation.

RequiredIfClass in namespace Illuminate\Validation\Rules
$ ValidationException#responseProperty in class ValidationException

The recommended response to send to the client.

$ ValidationException#redirectToProperty in class ValidationException

The path the client should be redirected to.

ValidationException::redirectTo() — Method in class ValidationException

Set the URL to redirect to on a validation error.

ValidationRuleParser::ruleIsRegex() — Method in class ValidationRuleParser

Determine if the rule is a regular expression.

ValidationServiceProvider::register() — Method in class ValidationServiceProvider

Register the service provider.

ValidationServiceProvider::registerValidationFactory() — Method in class ValidationServiceProvider

Register the validation factory.

ValidationServiceProvider::registerPresenceVerifier() — Method in class ValidationServiceProvider

Register the database presence verifier.

ValidationServiceProvider::registerUncompromisedVerifier() — Method in class ValidationServiceProvider

Register the uncompromised password verifier.

$ Validator#rulesProperty in class Validator

The rules to be applied to the data.

$ Validator#replacersProperty in class Validator

All of the custom replacer extensions.

Validator::replacePlaceholders() — Method in class Validator

Replace the placeholders used in data keys.

Validator::replacePlaceholderInString() — Method in class Validator

Replace the placeholders in the given string.

Validator::removeAttribute() — Method in class Validator

Remove the given attribute.

Validator::replaceDotInParameters() — Method in class Validator

Replace each field parameter which has an escaped dot with the dot placeholder.

Validator::replaceAsterisksInParameters() — Method in class Validator

Replace each field parameter which has asterisks with the given keys.

AnonymousComponent::render() — Method in class AnonymousComponent

Get the view / view contents that represent the component.

$ BladeCompiler#rawTagsProperty in class BladeCompiler

Array of opening and closing tags for raw echos.

$ BladeCompiler#rawBlocksProperty in class BladeCompiler

Array to temporarily store the raw blocks found in the template.

BladeCompiler::render() — Method in class BladeCompiler
Component::render() — Method in class Component

Get the view / view contents that represent the component.

Component::resolve() — Method in class Component

Resolve the component instance with the given data.

Component::resolveView() — Method in class Component

Resolve the Blade view or view file that should be used when rendering the component.

Component::resolveComponentsUsing() — Method in class Component

Set the callback that should be used to resolve components within views.

ComponentAttributeBag::resolveAppendableAttributeDefault() — Method in class ComponentAttributeBag

Resolve an appendable attribute value default value.

ManagesComponents::renderComponent() — Method in class ManagesComponents

Render the current component.

ManagesTranslations::renderTranslation() — Method in class ManagesTranslations

Render the current translation.

DynamicComponent::render() — Method in class DynamicComponent

Get the view / contents that represent the component.

$ EngineResolver#resolversProperty in class EngineResolver

The array of engine resolvers.

$ EngineResolver#resolvedProperty in class EngineResolver

The resolved engine instances.

EngineResolver::register() — Method in class EngineResolver

Register a new engine resolver.

EngineResolver::resolve() — Method in class EngineResolver

Resolve an engine instance by name.

$ Factory#renderCountProperty in class Factory

The number of active rendering operations.

$ Factory#renderedOnceProperty in class Factory

The "once" block IDs that have been rendered.

Factory::renderWhen() — Method in class Factory

Get the rendered content of the view based on a given condition.

Factory::renderUnless() — Method in class Factory

Get the rendered content of the view based on the negation of a given condition.

Factory::renderEach() — Method in class Factory

Get the rendered contents of a partial from a loop.

Factory::replaceNamespace() — Method in class Factory

Replace the namespace hints for the given namespace.

FileViewFinder::resolvePath() — Method in class FileViewFinder

Resolve the path.

FileViewFinder::replaceNamespace() — Method in class FileViewFinder

Replace the namespace hints for the given namespace.

InvokableComponentVariable::resolveDisplayableValue() — Method in class InvokableComponentVariable

Resolve the displayable value that the class is deferring.

View::render() — Method in class View

Get the string contents of the view.

View::renderContents() — Method in class View

Get the contents of the view instance.

View::renderSections() — Method in class View

Get the sections of the rendered view.

ViewException::report() — Method in class ViewException

Report the exception.

ViewException::render() — Method in class ViewException

Render the exception into an HTTP response.

ViewFinderInterface::replaceNamespace() — Method in class ViewFinderInterface

Replace the namespace hints for the given namespace.

ViewServiceProvider::register() — Method in class ViewServiceProvider

Register the service provider.

ViewServiceProvider::registerFactory() — Method in class ViewServiceProvider

Register the view environment.

ViewServiceProvider::registerViewFinder() — Method in class ViewServiceProvider

Register the view finder implementation.

ViewServiceProvider::registerBladeCompiler() — Method in class ViewServiceProvider

Register the Blade compiler implementation.

ViewServiceProvider::registerEngineResolver() — Method in class ViewServiceProvider

Register the engine resolver instance.

ViewServiceProvider::registerFileEngine() — Method in class ViewServiceProvider

Register the file engine implementation.

ViewServiceProvider::registerPhpEngine() — Method in class ViewServiceProvider

Register the PHP engine implementation.

ViewServiceProvider::registerBladeEngine() — Method in class ViewServiceProvider

Register the Blade engine implementation.

S

$ AuthorizationException#statusProperty in class AuthorizationException

The HTTP response status code.

AuthorizationException::setResponse() — Method in class AuthorizationException

Set the response from the gate.

AuthorizationException::status() — Method in class AuthorizationException

Get the HTTP status code.

$ Gate#stringCallbacksProperty in class Gate

All of the defined abilities using [email protected] notation.

Gate::setContainer() — Method in class Gate

Set the container instance used by the gate.

$ Response#statusProperty in class Response

The HTTP response status code.

Response::status() — Method in class Response

Get the HTTP status code.

AuthManager::shouldUse() — Method in class AuthManager

Set the default guard driver the factory should serve.

AuthManager::setDefaultDriver() — Method in class AuthManager

Set the default authentication driver name.

AuthManager::setApplication() — Method in class AuthManager

Set the application instance used by the manager.

Authenticatable::setRememberToken() — Method in class Authenticatable

Set the token value for the "remember me" session.

$ ClearResetsCommand#signatureProperty in class ClearResetsCommand

The name and signature of the console command.

EloquentUserProvider::setHasher() — Method in class EloquentUserProvider

Sets the hasher implementation.

EloquentUserProvider::setModel() — Method in class EloquentUserProvider

Sets the name of the Eloquent user model.

GenericUser::setRememberToken() — Method in class GenericUser

Set the "remember me" token value.

GuardHelpers::setUser() — Method in class GuardHelpers

Set the current user.

GuardHelpers::setProvider() — Method in class GuardHelpers

Set the user provider used by the guard.

SendEmailVerificationNotificationClass in namespace Illuminate\Auth\Listeners
RequirePassword::shouldConfirmPassword() — Method in class RequirePassword

Determine if the confirmation timeout has expired.

MustVerifyEmail::sendEmailVerificationNotification() — Method in class MustVerifyEmail

Send the email verification notification.

CanResetPassword::sendPasswordResetNotification() — Method in class CanResetPassword

Send the password reset notification.

PasswordBroker::sendResetLink() — Method in class PasswordBroker

Send a password reset link to a user.

PasswordBrokerManager::setDefaultDriver() — Method in class PasswordBrokerManager

Set the default password broker name.

Recaller::segments() — Method in class Recaller

Get the recaller's segments.

RequestGuard::setRequest() — Method in class RequestGuard

Set the current request instance.

SessionGuardClass in namespace Illuminate\Auth
$ SessionGuard#sessionProperty in class SessionGuard

The session used by the guard.

SessionGuard::shouldLogin() — Method in class SessionGuard

Determine if the user should login by executing the given callbacks.

SessionGuard::setRememberDuration() — Method in class SessionGuard

Set the number of minutes the remember me cookie should be valid for.

SessionGuard::setCookieJar() — Method in class SessionGuard

Set the cookie creator instance used by the guard.

SessionGuard::setDispatcher() — Method in class SessionGuard

Set the event dispatcher instance.

SessionGuard::setUser() — Method in class SessionGuard

Set the current user.

SessionGuard::setRequest() — Method in class SessionGuard

Set the current request instance.

$ TokenGuard#storageKeyProperty in class TokenGuard

The name of the token "column" in persistent storage.

TokenGuard::setRequest() — Method in class TokenGuard

Set the current request instance.

BroadcastManager::socket() — Method in class BroadcastManager

Get the socket ID for the given request.

BroadcastManager::setDefaultDriver() — Method in class BroadcastManager

Set the default driver name.

BroadcastManager::setApplication() — Method in class BroadcastManager

Set the application instance used by the manager.

PusherBroadcaster::setPusher() — Method in class PusherBroadcaster

Set the Pusher SDK instance.

$ InteractsWithSockets#socketProperty in class InteractsWithSockets

The socket ID for the user that raised the event.

BatchRepository::store() — Method in class BatchRepository

Store a new pending batch.

DatabaseBatchRepository::store() — Method in class DatabaseBatchRepository

Store a new pending batch.

DatabaseBatchRepository::serialize() — Method in class DatabaseBatchRepository

Serialize the given value.

DatabaseBatchRepository::setConnection() — Method in class DatabaseBatchRepository

Set the underlying database connection.

Queueable::serializeJob() — Method in class Queueable

Serialize a job for queuing.

$ ArrayLock#storeProperty in class ArrayLock

The parent array cache store.

$ ArrayStore#storageProperty in class ArrayStore

The array of stored values.

$ ArrayStore#serializesValuesProperty in class ArrayStore

Indicates if values are serialized within the store.

$ CacheLock#storeProperty in class CacheLock

The cache store implementation.

$ CacheManager#storesProperty in class CacheManager

The array of resolved cache stores.

CacheManager::store() — Method in class CacheManager

Get a cache store instance by name, wrapped in a repository.

CacheManager::setEventDispatcher() — Method in class CacheManager

Set the event dispatcher on the given repository instance.

CacheManager::setDefaultDriver() — Method in class CacheManager

Set the default cache driver name.

$ ForgetCommand#signatureProperty in class ForgetCommand

The console command name.

DatabaseStore::setLockConnection() — Method in class DatabaseStore

Specify the name of the connection that should be used to manage locks.

DatabaseStore::serialize() — Method in class DatabaseStore

Serialize the given value.

DynamoDbStore::serialize() — Method in class DynamoDbStore

Serialize the value.

DynamoDbStore::setPrefix() — Method in class DynamoDbStore

Set the cache key prefix.

CacheEvent::setTags() — Method in class CacheEvent

Set the tags for the cache event.

$ KeyWritten#secondsProperty in class KeyWritten

The number of seconds the key should be valid.

$ Lock#secondsProperty in class Lock

The number of seconds the lock should be maintained.

$ Lock#sleepMillisecondsProperty in class Lock

The number of milliseconds to wait before re-attempting to acquire a lock while blocking.

MemcachedConnector::setCredentials() — Method in class MemcachedConnector

Set the SASL credentials on the Memcached connection.

MemcachedStore::setPrefix() — Method in class MemcachedStore

Set the cache key prefix.

RedisStore::setConnection() — Method in class RedisStore

Specify the name of the connection that should be used to store data.

RedisStore::setLockConnection() — Method in class RedisStore

Specify the name of the connection that should be used to manage locks.

RedisStore::setPrefix() — Method in class RedisStore

Set the cache key prefix.

RedisStore::serialize() — Method in class RedisStore

Serialize the value.

$ Repository#storeProperty in class Repository

The cache store implementation.

Repository::set() — Method in class Repository
{@inheritdoc}
Repository::setMultiple() — Method in class Repository
{@inheritdoc}
Repository::sear() — Method in class Repository
Repository::supportsTags() — Method in class Repository

Determine if the current store supports tags.

Repository::setDefaultCacheTime() — Method in class Repository

Set the default cache time in seconds.

Repository::setStore() — Method in class Repository

Set the cache store implementation.

Repository::setEventDispatcher() — Method in class Repository

Set the event dispatcher instance.

$ TagSet#storeProperty in class TagSet

The cache store implementation.

Repository::set() — Method in class Repository

Set a given configuration value.

Application::starting() — Method in class Application

Register a console "starting" bootstrapper.

Application::setContainerCommandLoader() — Method in class Application

Set the container command loader for lazy resolution.

$ CacheCommandMutex#storeProperty in class CacheCommandMutex

The cache store that should be used.

$ Command#signatureProperty in class Command

The name and signature of the console command.

Command::setHidden() — Method in class Command
{@inheritdoc}
Command::setLaravel() — Method in class Command

Set the Laravel application instance.

HasParameters::specifyParameters() — Method in class HasParameters

Specify the arguments and options on the command.

InteractsWithIO::secret() — Method in class InteractsWithIO

Prompt the user for input but hide the answer from the console.

InteractsWithIO::setInput() — Method in class InteractsWithIO

Set the input interface implementation.

InteractsWithIO::setOutput() — Method in class InteractsWithIO

Set the output interface implementation.

InteractsWithIO::setVerbosity() — Method in class InteractsWithIO

Set the verbosity level.

$ InteractsWithSignals#signalsProperty in class InteractsWithSignals

The signal registrar instance.

ScheduledBackgroundTaskFinishedClass in namespace Illuminate\Console\Events
ScheduledTaskFailedClass in namespace Illuminate\Console\Events
ScheduledTaskFinishedClass in namespace Illuminate\Console\Events
ScheduledTaskSkippedClass in namespace Illuminate\Console\Events
ScheduledTaskStartingClass in namespace Illuminate\Console\Events
GeneratorCommand::sortImports() — Method in class GeneratorCommand

Alphabetically sorts the imports for the given stub.

$ CacheEventMutex#storeProperty in class CacheEventMutex

The cache store that should be used.

$ CacheSchedulingMutex#storeProperty in class CacheSchedulingMutex

The cache store that should be used.

CallbackEvent::shouldSkipDueToOverlapping() — Method in class CallbackEvent

Determine if the event should skip because another process is overlapping.

$ Event#shouldAppendOutputProperty in class Event

Indicates whether output should be appended.

Event::shouldSkipDueToOverlapping() — Method in class Event

Determine if the event should skip because another process is overlapping.

Event::start() — Method in class Event

Run the command process.

Event::storeOutput() — Method in class Event

Ensure that the output is stored on disk in a log file.

Event::sendOutputTo() — Method in class Event

Send the output of the command to a given location.

Event::skip() — Method in class Event

Register a callback to further filter the schedule.

ManagesFrequencies::saturdays() — Method in class ManagesFrequencies

Schedule the event to run only on Saturdays.

ManagesFrequencies::sundays() — Method in class ManagesFrequencies

Schedule the event to run only on Sundays.

ManagesFrequencies::spliceIntoPosition() — Method in class ManagesFrequencies

Splice the given value into the given position of the expression.

ScheduleClass in namespace Illuminate\Console\Scheduling
$ Schedule#schedulingMutexProperty in class Schedule

The scheduling mutex implementation.

Schedule::serverShouldRun() — Method in class Schedule

Determine if the server is allowed to run this event.

ScheduleClearCacheCommandClass in namespace Illuminate\Console\Scheduling
ScheduleFinishCommandClass in namespace Illuminate\Console\Scheduling
$ ScheduleFinishCommand#signatureProperty in class ScheduleFinishCommand

The console command name.

ScheduleListCommandClass in namespace Illuminate\Console\Scheduling
$ ScheduleListCommand#signatureProperty in class ScheduleListCommand

The console command name.

ScheduleRunCommandClass in namespace Illuminate\Console\Scheduling
$ ScheduleRunCommand#scheduleProperty in class ScheduleRunCommand

The schedule instance.

$ ScheduleRunCommand#startedAtProperty in class ScheduleRunCommand

The 24 hour timestamp this scheduler command started running.

ScheduleTestCommandClass in namespace Illuminate\Console\Scheduling
$ ScheduleTestCommand#signatureProperty in class ScheduleTestCommand

The console command name.

ScheduleWorkCommandClass in namespace Illuminate\Console\Scheduling
$ ScheduleWorkCommand#signatureProperty in class ScheduleWorkCommand

The name and signature of the console command.

SchedulingMutexClass in namespace Illuminate\Console\Scheduling
SignalsClass in namespace Illuminate\Console
Signals::setHandlers() — Method in class Signals

Set the registry's handlers.

$ Line#stylesProperty in class Line

The possible line styles.

$ Container#scopedInstancesProperty in class Container

The container's scoped instances.

Container::singleton() — Method in class Container

Register a shared binding in the container.

Container::singletonIf() — Method in class Container

Register a shared binding if it hasn't already been registered.

Container::scoped() — Method in class Container

Register a scoped binding in the container.

Container::scopedIf() — Method in class Container

Register a scoped binding if it hasn't already been registered.

Container::setInstance() — Method in class Container

Set the shared instance of the container.

Authenticatable::setRememberToken() — Method in class Authenticatable

Set the token value for the "remember me" session.

CanResetPassword::sendPasswordResetNotification() — Method in class CanResetPassword

Send the password reset notification.

Factory::shouldUse() — Method in class Factory

Set the default guard the factory should serve.

Guard::setUser() — Method in class Guard

Set the current user.

MustVerifyEmail::sendEmailVerificationNotification() — Method in class MustVerifyEmail

Send the email verification notification.

PasswordBroker::sendResetLink() — Method in class PasswordBroker

Send a password reset link to a user.

StatefulGuardClass in namespace Illuminate\Contracts\Auth
SupportsBasicAuthClass in namespace Illuminate\Contracts\Auth
ShouldBeUniqueClass in namespace Illuminate\Contracts\Broadcasting
ShouldBroadcastClass in namespace Illuminate\Contracts\Broadcasting
ShouldBroadcastNowClass in namespace Illuminate\Contracts\Broadcasting
Factory::store() — Method in class Factory

Get a cache store instance by name.

Repository::sear() — Method in class Repository
StoreClass in namespace Illuminate\Contracts\Cache
Repository::set() — Method in class Repository

Set a given configuration value.

Container::singleton() — Method in class Container

Register a shared binding in the container.

Container::singletonIf() — Method in class Container

Register a shared binding if it hasn't already been registered.

Container::scoped() — Method in class Container

Register a scoped binding in the container.

Container::scopedIf() — Method in class Container

Register a scoped binding if it hasn't already been registered.

CastsAttributes::set() — Method in class CastsAttributes

Transform the attribute to its underlying model values.

CastsInboundAttributes::set() — Method in class CastsInboundAttributes

Transform the attribute to its underlying model values.

SerializesCastableAttributesClass in namespace Illuminate\Contracts\Database\Eloquent
SerializesCastableAttributes::serialize() — Method in class SerializesCastableAttributes

Serialize the attribute when converting the model to an array.

SupportsPartialRelationsClass in namespace Illuminate\Contracts\Database\Eloquent
ExceptionHandler::shouldReport() — Method in class ExceptionHandler

Determine if the exception should be reported.

StringEncrypterClass in namespace Illuminate\Contracts\Encryption
Dispatcher::subscribe() — Method in class Dispatcher

Register an event subscriber with the dispatcher.

Filesystem::setVisibility() — Method in class Filesystem

Set the visibility for the given path.

Filesystem::size() — Method in class Filesystem

Get the file size of a given file.

Application::storagePath() — Method in class Application

Get the path to the storage directory.

Application::setLocale() — Method in class Application

Set the current application locale.

Application::shouldSkipMiddleware() — Method in class Application

Determine if middleware has been disabled for the application.

Mailable::send() — Method in class Mailable

Send the message using the given mailer.

Mailer::send() — Method in class Mailer

Send a new message using a view.

Dispatcher::send() — Method in class Dispatcher

Send the given notification to the given notifiable entities.

Dispatcher::sendNow() — Method in class Dispatcher

Send the given notification immediately.

Factory::send() — Method in class Factory

Send the given notification to the given notifiable entities.

Factory::sendNow() — Method in class Factory

Send the given notification immediately.

Pipeline::send() — Method in class Pipeline

Set the traveler object being sent on the pipeline.

InvokedProcess::signal() — Method in class InvokedProcess

Send a signal to the process.

ProcessResult::successful() — Method in class ProcessResult

Determine if the process was successful.

Monitor::stopping() — Method in class Monitor

Register a callback to be executed when a daemon queue is stopping.

Queue::size() — Method in class Queue

Get the size of the queue.

Queue::setConnectionName() — Method in class Queue

Set the connection name for the queue.

ShouldBeEncryptedClass in namespace Illuminate\Contracts\Queue
ShouldBeUniqueClass in namespace Illuminate\Contracts\Queue
ShouldBeUniqueUntilProcessingClass in namespace Illuminate\Contracts\Queue
ShouldQueueClass in namespace Illuminate\Contracts\Queue
Connection::subscribe() — Method in class Connection

Subscribe to a set of given channels for messages.

Registrar::substituteBindings() — Method in class Registrar

Substitute the route bindings onto the route.

Registrar::substituteImplicitBindings() — Method in class Registrar

Substitute the implicit Eloquent model bindings for the route.

ResponseFactory::stream() — Method in class ResponseFactory

Create a new streamed response instance.

ResponseFactory::streamDownload() — Method in class ResponseFactory

Create a new streamed response instance as a file download.

UrlGenerator::secure() — Method in class UrlGenerator

Generate a secure, absolute URL to the given path.

UrlGenerator::setRootControllerNamespace() — Method in class UrlGenerator

Set the root controller namespace.

SessionClass in namespace Illuminate\Contracts\Session
Session::setName() — Method in class Session

Set the name of the session.

Session::setId() — Method in class Session

Set the session ID.

Session::start() — Method in class Session

Start the session, reading the data from a handler.

Session::save() — Method in class Session

Save the session data to storage.

Session::setPreviousUrl() — Method in class Session

Set the "previous" URL in the session.

Session::setRequestOnHandler() — Method in class Session

Set the request on the handler instance.

MessageBag::setFormat() — Method in class MessageBag

Set the default message format.

Translator::setLocale() — Method in class Translator

Set the default locale.

DataAwareRule::setData() — Method in class DataAwareRule

Set the data under validation.

Validator::sometimes() — Method in class Validator

Add conditions to a given field based on a Closure.

ValidatorAwareRule::setValidator() — Method in class ValidatorAwareRule

Set the current validator.

Factory::share() — Method in class Factory

Add a piece of shared data to the environment.

$ CookieJar#secureProperty in class CookieJar

The default secure setting (defaults to null).

$ CookieJar#sameSiteProperty in class CookieJar

The default SameSite option (defaults to lax).

CookieJar::setDefaultPathAndDomain() — Method in class CookieJar

Set the default path and domain for the jar.

$ EncryptCookies#serializeProperty in class EncryptCookies

Indicates if cookies should be serialized.

EncryptCookies::serialized() — Method in class EncryptCookies

Determine if the cookie contents should be serialized.

Manager::setupDefaultConfiguration() — Method in class Manager

Setup the default database configuration options.

Manager::setupManager() — Method in class Manager

Build the database manager instance.

Manager::schema() — Method in class Manager

Get a schema builder instance.

Manager::setFetchMode() — Method in class Manager

Set the fetch mode for the database connections.

Manager::setEventDispatcher() — Method in class Manager

Set the event dispatcher instance to be used by connections.

BuildsQueries::sole() — Method in class BuildsQueries

Execute the query and get the first result if it's the sole matching record.

BuildsQueries::simplePaginator() — Method in class BuildsQueries

Create a new simple paginator instance.

$ Connection#schemaGrammarProperty in class Connection

The schema grammar implementation.

Connection::selectOne() — Method in class Connection

Run a select statement and return a single result.

Connection::scalar() — Method in class Connection

Run a select statement and return the first column of the first row.

Connection::selectFromWriteConnection() — Method in class Connection

Run a select statement against the database.

Connection::select() — Method in class Connection

Run a select statement against the database.

Connection::statement() — Method in class Connection

Execute an SQL statement and return the boolean result.

Connection::setRecordModificationState() — Method in class Connection

Set the record modification state.

Connection::setPdo() — Method in class Connection

Set the PDO connection.

Connection::setReadPdo() — Method in class Connection

Set the PDO connection used for reading.

Connection::setReconnector() — Method in class Connection

Set the reconnect instance on the connection.

Connection::setQueryGrammar() — Method in class Connection

Set the query grammar used by the connection.

Connection::setSchemaGrammar() — Method in class Connection

Set the schema grammar used by the connection.

Connection::setPostProcessor() — Method in class Connection

Set the query post processor used by the connection.

Connection::setEventDispatcher() — Method in class Connection

Set the event dispatcher instance on the connection.

Connection::setTransactionManager() — Method in class Connection

Set the transaction manager instance on the connection.

Connection::setDatabaseName() — Method in class Connection

Set the name of the connected database.

Connection::setReadWriteType() — Method in class Connection

Set the read / write type of the connection.

Connection::setTablePrefix() — Method in class Connection

Set the table prefix in use by the connection.

ConnectionInterface::selectOne() — Method in class ConnectionInterface

Run a select statement and return a single result.

ConnectionInterface::select() — Method in class ConnectionInterface

Run a select statement against the database.

ConnectionInterface::statement() — Method in class ConnectionInterface

Execute an SQL statement and return the boolean result.

ConnectionResolver::setDefaultConnection() — Method in class ConnectionResolver

Set the default connection name.

ConnectionResolverInterface::setDefaultConnection() — Method in class ConnectionResolverInterface

Set the default connection name.

Connector::setDefaultOptions() — Method in class Connector

Set the default PDO connection options.

MySqlConnector::setModes() — Method in class MySqlConnector

Set the modes for the connection.

MySqlConnector::setCustomModes() — Method in class MySqlConnector

Set the custom modes on the connection.

MySqlConnector::strictMode() — Method in class MySqlConnector

Get the query to enable strict mode.

SQLiteConnectorClass in namespace Illuminate\Database\Connectors
SqlServerConnectorClass in namespace Illuminate\Database\Connectors
$ DbCommand#signatureProperty in class DbCommand

The name and signature of the console command.

$ DumpCommand#signatureProperty in class DumpCommand

The console command name.

DumpCommand::schemaState() — Method in class DumpCommand

Create a schema state instance for the given connection.

$ MigrateCommand#signatureProperty in class MigrateCommand

The name and signature of the console command.

MigrateCommand::schemaPath() — Method in class MigrateCommand

Get the path to the stored schema for the given connection.

$ MigrateMakeCommand#signatureProperty in class MigrateMakeCommand

The console command signature.

StatusCommandClass in namespace Illuminate\Database\Console\Migrations
$ MonitorCommand#signatureProperty in class MonitorCommand

The name and signature of the console command.

$ PruneCommand#signatureProperty in class PruneCommand

The console command name.

SeedCommandClass in namespace Illuminate\Database\Console\Seeds
SeederMakeCommandClass in namespace Illuminate\Database\Console\Seeds
ShowCommandClass in namespace Illuminate\Database\Console
$ ShowCommand#signatureProperty in class ShowCommand

The name and signature of the console command.

ShowModelCommandClass in namespace Illuminate\Database\Console
$ ShowModelCommand#signatureProperty in class ShowModelCommand

The console command signature.

$ TableCommand#signatureProperty in class TableCommand

The name and signature of the console command.

DatabaseManager::setPdoForType() — Method in class DatabaseManager

Prepare the read / write mode for database connection instance.

DatabaseManager::setDefaultConnection() — Method in class DatabaseManager

Set the default connection name.

DatabaseManager::supportedDrivers() — Method in class DatabaseManager

Get all of the support drivers.

DatabaseManager::setReconnector() — Method in class DatabaseManager

Set the database reconnector callback.

DatabaseManager::setApplication() — Method in class DatabaseManager

Set the application instance used by the manager.

BroadcastableModelEventOccurred::shouldBroadcastNow() — Method in class BroadcastableModelEventOccurred

Determine if the event should be broadcast synchronously.

$ Builder#scopesProperty in class Builder

Applied global scopes.

Builder::sole() — Method in class Builder

Execute the query and get the first result if it's the sole matching record.

Builder::soleValue() — Method in class Builder

Get a single column's value from the first result of a query if it's the sole matching record.

Builder::simplePaginate() — Method in class Builder

Paginate the given query into a simple paginator.

Builder::scopes() — Method in class Builder

Call the given local model scopes.

Builder::setQuery() — Method in class Builder

Set the underlying query builder instance.

Builder::setEagerLoads() — Method in class Builder

Set the relationships being eagerly loaded.

Builder::setModel() — Method in class Builder

Set a model instance for the model being queried.

AsArrayObject::set() — Method in class AsArrayObject
AsArrayObject::serialize() — Method in class AsArrayObject
AsCollection::set() — Method in class AsCollection
AsEncryptedArrayObject::set() — Method in class AsEncryptedArrayObject
AsEncryptedArrayObject::serialize() — Method in class AsEncryptedArrayObject
AsEncryptedCollection::set() — Method in class AsEncryptedCollection
AsEnumArrayObject::set() — Method in class AsEnumArrayObject
AsEnumArrayObject::serialize() — Method in class AsEnumArrayObject
AsEnumCollection::set() — Method in class AsEnumCollection
AsEnumCollection::serialize() — Method in class AsEnumCollection
AsStringable::set() — Method in class AsStringable
$ Attribute#setProperty in class Attribute

The attribute mutator.

Attribute::set() — Method in class Attribute

Create a new attribute mutator.

Attribute::shouldCache() — Method in class Attribute

Enable caching for the attribute.

Collection::setVisible() — Method in class Collection

Set the visible attributes across the entire collection.

Collection::setHidden() — Method in class Collection

Set the hidden attributes across the entire collection.

$ HasAttributes#snakeAttributesProperty in class HasAttributes

Indicates whether attributes are snake cased on arrays.

$ HasAttributes#setAttributeMutatorCacheProperty in class HasAttributes

The cache of the "Attribute" return type marked mutated, settable attributes for each class.

HasAttributes::serializeClassCastableAttribute() — Method in class HasAttributes

Serialize the given attribute using the custom cast class.

HasAttributes::setAttribute() — Method in class HasAttributes

Set a given attribute on the model.

HasAttributes::setMutatedAttributeValue() — Method in class HasAttributes

Set the value of an attribute using its mutator.

HasAttributes::setAttributeMarkedMutatedAttributeValue() — Method in class HasAttributes

Set the value of a "Attribute" return type marked attribute using its mutator.

HasAttributes::setClassCastableAttribute() — Method in class HasAttributes

Set the value of a class castable attribute.

HasAttributes::setEnumCastableAttribute() — Method in class HasAttributes

Set the value of an enum castable attribute.

HasAttributes::serializeDate() — Method in class HasAttributes

Prepare a date for array / JSON serialization.

HasAttributes::setDateFormat() — Method in class HasAttributes

Set the date format used by the model.

HasAttributes::setRawAttributes() — Method in class HasAttributes

Set the array of model attributes. No checking is done.

HasAttributes::syncOriginal() — Method in class HasAttributes

Sync the original attributes with the current.

HasAttributes::syncOriginalAttribute() — Method in class HasAttributes

Sync a single original attribute with its current value.

HasAttributes::syncOriginalAttributes() — Method in class HasAttributes

Sync multiple original attribute with their current values.

HasAttributes::syncChanges() — Method in class HasAttributes

Sync the changed attributes.

HasAttributes::setAppends() — Method in class HasAttributes

Set the accessors to append to model arrays.

HasEvents::setObservableEvents() — Method in class HasEvents

Set the observable event names.

HasEvents::saving() — Method in class HasEvents

Register a saving model event with the dispatcher.

HasEvents::saved() — Method in class HasEvents

Register a saved model event with the dispatcher.

HasEvents::setEventDispatcher() — Method in class HasEvents

Set the event dispatcher instance.

HasRelationships::setRelation() — Method in class HasRelationships

Set the given relationship on the model.

HasRelationships::setRelations() — Method in class HasRelationships

Set the entire relations array on the model.

HasRelationships::setTouchedRelations() — Method in class HasRelationships

Set the relationships that are touched on save.

HasTimestamps::setCreatedAt() — Method in class HasTimestamps

Set the value of the "created at" attribute.

HasTimestamps::setUpdatedAt() — Method in class HasTimestamps

Set the value of the "updated at" attribute.

HasUniqueIds::setUniqueIds() — Method in class HasUniqueIds

Generate a unique keys for model.

HidesAttributes::setHidden() — Method in class HidesAttributes

Set the hidden attributes for the model.

HidesAttributes::setVisible() — Method in class HidesAttributes

Set the visible attributes for the model.

$ Factory#statesProperty in class Factory

The state transformations that will be applied to the model.

Factory::store() — Method in class Factory

Set the connection name on the results and store them.

Factory::state() — Method in class Factory

Add a new state transformation to the model definition.

Factory::set() — Method in class Factory

Set a single model attribute.

Factory::sequence() — Method in class Factory

Add a new sequenced state transformation to the model definition.

SequenceClass in namespace Illuminate\Database\Eloquent\Factories
$ Sequence#sequenceProperty in class Sequence

The sequence of return values.

Model::shouldBeStrict() — Method in class Model

Indicate that models should prevent lazy loading, silently discarding attributes, and accessing missing attributes.

Model::saveQuietly() — Method in class Model

Save the model to the database without raising any events.

Model::save() — Method in class Model

Save the model to the database.

Model::saveOrFail() — Method in class Model

Save the model to the database within a transaction.

Model::setKeysForSelectQuery() — Method in class Model

Set the keys for a select query.

Model::setKeysForSaveQuery() — Method in class Model

Set the keys for a save update query.

Model::setConnection() — Method in class Model

Set the connection associated with the model.

Model::setConnectionResolver() — Method in class Model

Set the connection resolver instance.

Model::setTable() — Method in class Model

Set the table associated with the model.

Model::setKeyName() — Method in class Model

Set the primary key for the model.

Model::setKeyType() — Method in class Model

Set the data type for the primary key.

Model::setIncrementing() — Method in class Model

Set whether IDs are incrementing.

Model::setPerPage() — Method in class Model

Set the number of models to return per page.

ModelNotFoundException::setModel() — Method in class ModelNotFoundException

Set the affected Eloquent model and instance ids.

BelongsToMany::shouldSelect() — Method in class BelongsToMany

Get the select columns for the relation query.

BelongsToMany::simplePaginate() — Method in class BelongsToMany

Paginate the given query into a simple paginator.

BelongsToMany::save() — Method in class BelongsToMany

Save a new model and attach it to the parent model.

BelongsToMany::saveQuietly() — Method in class BelongsToMany

Save a new model without raising any events and attach it to the parent model.

BelongsToMany::saveMany() — Method in class BelongsToMany

Save an array of new models and attach them to the parent model.

BelongsToMany::saveManyQuietly() — Method in class BelongsToMany

Save an array of new models without raising any events and attach them to the parent model.

AsPivot::setKeysForSelectQuery() — Method in class AsPivot

Set the keys for a select query.

AsPivot::setKeysForSaveQuery() — Method in class AsPivot

Set the keys for a save update query.

AsPivot::setPivotKeys() — Method in class AsPivot

Set the key names for the pivot model instance.

InteractsWithPivotTable::syncWithoutDetaching() — Method in class InteractsWithPivotTable

Sync the intermediate tables with a list of IDs without detaching.

InteractsWithPivotTable::sync() — Method in class InteractsWithPivotTable

Sync the intermediate tables with a list of IDs or collection of models.

InteractsWithPivotTable::syncWithPivotValues() — Method in class InteractsWithPivotTable

Sync the intermediate tables with a list of IDs or collection of models with the given pivot values.

SupportsDefaultModelsClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
$ HasManyThrough#secondKeyProperty in class HasManyThrough

The far key on the relationship.

$ HasManyThrough#secondLocalKeyProperty in class HasManyThrough

The local key on the intermediary model.

HasManyThrough::simplePaginate() — Method in class HasManyThrough

Paginate the given query into a simple paginator.

HasManyThrough::shouldSelect() — Method in class HasManyThrough

Set the select clause for the relation query.

HasOneOrMany::save() — Method in class HasOneOrMany

Attach a model instance to the parent model.

HasOneOrMany::saveQuietly() — Method in class HasOneOrMany

Attach a model instance without raising any events to the parent model.

HasOneOrMany::saveMany() — Method in class HasOneOrMany

Attach a collection of models to the parent instance.

HasOneOrMany::saveManyQuietly() — Method in class HasOneOrMany

Attach a collection of models to the parent instance without raising any events to the parent model.

HasOneOrMany::setForeignAttributesForCreate() — Method in class HasOneOrMany

Set the foreign ID for creating a related model.

MorphOneOrMany::setForeignAttributesForCreate() — Method in class MorphOneOrMany

Set the foreign ID and type for creating a related model.

MorphPivot::setKeysForSaveQuery() — Method in class MorphPivot

Set the keys for a save update query.

MorphPivot::setKeysForSelectQuery() — Method in class MorphPivot

Set the keys for a select query.

MorphPivot::setMorphType() — Method in class MorphPivot

Set the morph type for the pivot.

MorphPivot::setMorphClass() — Method in class MorphPivot

Set the morph class for the pivot.

$ Relation#selfJoinCountProperty in class Relation

The count of self joins.

Relation::sole() — Method in class Relation

Execute the query and get the first result if it's the sole matching record.

ScopeClass in namespace Illuminate\Database\Eloquent
SoftDeletesClass in namespace Illuminate\Database\Eloquent
SoftDeletes::softDeleted() — Method in class SoftDeletes

Register a "softDeleted" model event callback with the dispatcher.

SoftDeletingScopeClass in namespace Illuminate\Database\Eloquent
$ QueryExecuted#sqlProperty in class QueryExecuted

The SQL query that was executed.

SchemaDumpedClass in namespace Illuminate\Database\Events
SchemaLoadedClass in namespace Illuminate\Database\Events
StatementPreparedClass in namespace Illuminate\Database\Events
$ StatementPrepared#statementProperty in class StatementPrepared

The PDO statement.

Grammar::setTablePrefix() — Method in class Grammar

Set the grammar's table prefix.

DatabaseMigrationRepository::setSource() — Method in class DatabaseMigrationRepository

Set the information source to gather data.

MigrationCreator::stubPath() — Method in class MigrationCreator

Get the path to the stubs.

MigrationRepositoryInterface::setSource() — Method in class MigrationRepositoryInterface

Set the information source to gather data.

Migrator::setConnection() — Method in class Migrator

Set the default connection name.

Migrator::setOutput() — Method in class Migrator

Set the output implementation that should be used by the console.

SQLiteDriverClass in namespace Illuminate\Database\PDO
SqlServerConnectionClass in namespace Illuminate\Database\PDO
SqlServerDriverClass in namespace Illuminate\Database\PDO
$ QueryException#sqlProperty in class QueryException

The SQL for the query.

Builder::select() — Method in class Builder

Set the columns to be selected.

Builder::selectSub() — Method in class Builder

Add a subselect expression to the query.

Builder::selectRaw() — Method in class Builder

Add a new "raw" select expression to the query.

Builder::skip() — Method in class Builder

Alias to set the "offset" value of the query.

Builder::sharedLock() — Method in class Builder

Share lock the selected rows in the table.

Builder::soleValue() — Method in class Builder

Get a single column's value from the first result of a query if it's the sole matching record.

Builder::simplePaginate() — Method in class Builder

Get a paginator only supporting simple next and previous links.

Builder::stripTableForPluck() — Method in class Builder

Strip off the table name or alias from a column identifier.

Builder::sum() — Method in class Builder

Retrieve the sum of the values of a given column.

Builder::setAggregate() — Method in class Builder

Set the aggregate property without running the query.

Builder::setBindings() — Method in class Builder

Set the bindings on the query builder.

$ Grammar#selectComponentsProperty in class Grammar

The components that make up a select clause.

Grammar::supportsSavepoints() — Method in class Grammar

Determine if the grammar supports savepoints.

SQLiteGrammarClass in namespace Illuminate\Database\Query\Grammars
SqlServerGrammarClass in namespace Illuminate\Database\Query\Grammars
$ SqlServerGrammar#selectComponentsProperty in class SqlServerGrammar

The components that make up a select clause.

SqlServerGrammar::sortBindingsForSubqueryOrderBy() — Method in class SqlServerGrammar

Move the order bindings to be after the "select" statement to account for an order by subquery.

SQLiteProcessorClass in namespace Illuminate\Database\Query\Processors
SqlServerProcessorClass in namespace Illuminate\Database\Query\Processors
SQLiteConnectionClass in namespace Illuminate\Database
SQLiteDatabaseDoesNotExistExceptionClass in namespace Illuminate\Database
Blueprint::spatialIndex() — Method in class Blueprint

Specify a spatial index for the table.

Blueprint::smallIncrements() — Method in class Blueprint

Create a new auto-incrementing small integer (2-byte) column on the table.

Blueprint::string() — Method in class Blueprint

Create a new string column on the table.

Blueprint::smallInteger() — Method in class Blueprint

Create a new small integer (2-byte) column on the table.

Blueprint::set() — Method in class Blueprint

Create a new set column on the table.

Blueprint::softDeletes() — Method in class Blueprint

Add a "deleted at" timestamp for the table.

Blueprint::softDeletesTz() — Method in class Blueprint

Add a "deleted at" timestampTz for the table.

Blueprint::softDeletesDatetime() — Method in class Blueprint

Add a "deleted at" datetime column to the table.

Builder::setConnection() — Method in class Builder

Set the database connection instance.

ColumnDefinition::spatialIndex() — Method in class ColumnDefinition

Add a spatial index

ColumnDefinition::startingValue() — Method in class ColumnDefinition
ColumnDefinition::storedAs() — Method in class ColumnDefinition
Grammar::supportsSchemaTransactions() — Method in class Grammar

Check if this Grammar supports schema changes wrapped in a transaction.

$ MySqlGrammar#serialsProperty in class MySqlGrammar

The possible column serials.

$ PostgresGrammar#serialsProperty in class PostgresGrammar

The columns available as serials.

RenameColumn::setRenamedColumns() — Method in class RenameColumn

Set the renamed columns on the table diff.

SQLiteGrammarClass in namespace Illuminate\Database\Schema\Grammars
$ SQLiteGrammar#serialsProperty in class SQLiteGrammar

The columns available as serials.

SqlServerGrammarClass in namespace Illuminate\Database\Schema\Grammars
$ SqlServerGrammar#serialsProperty in class SqlServerGrammar

The columns available as serials.

SQLiteBuilderClass in namespace Illuminate\Database\Schema
SchemaStateClass in namespace Illuminate\Database\Schema
SqlServerBuilderClass in namespace Illuminate\Database\Schema
SqliteSchemaStateClass in namespace Illuminate\Database\Schema
SeederClass in namespace Illuminate\Database
Seeder::setContainer() — Method in class Seeder

Set the IoC container instance.

Seeder::setCommand() — Method in class Seeder

Set the console command instance.

SqlServerConnectionClass in namespace Illuminate\Database
Encrypter::supported() — Method in class Encrypter

Determine if the given key and cipher combination is valid.

$ CallQueuedListener#shouldBeEncryptedProperty in class CallQueuedListener

Indicates if the job should be encrypted.

CallQueuedListener::setJobInstanceIfNecessary() — Method in class CallQueuedListener

Set the job instance of the given class if necessary.

Dispatcher::setupWildcardListen() — Method in class Dispatcher

Setup a wildcard listener callback.

Dispatcher::subscribe() — Method in class Dispatcher

Register an event subscriber with the dispatcher.

Dispatcher::shouldBroadcast() — Method in class Dispatcher

Determine if the payload has a broadcastable event.

Dispatcher::setQueueResolver() — Method in class Dispatcher

Set the queue resolver implementation.

NullDispatcher::subscribe() — Method in class NullDispatcher

Register an event subscriber with the dispatcher.

Filesystem::sharedGet() — Method in class Filesystem

Get contents of a file with shared access.

Filesystem::size() — Method in class Filesystem

Get the file size of a given file.

FilesystemAdapter::setVisibility() — Method in class FilesystemAdapter

Set the visibility for the given path.

FilesystemAdapter::size() — Method in class FilesystemAdapter

Get the file size of a given file.

FilesystemManager::set() — Method in class FilesystemManager

Set the given disk instance.

FilesystemManager::setApplication() — Method in class FilesystemManager

Set the application instance used by the manager.

LockableFile::size() — Method in class LockableFile

Get the file size.

AliasLoader::setAliases() — Method in class AliasLoader

Set the registered aliases.

AliasLoader::setRegistered() — Method in class AliasLoader

Set the "registered" state of the loader.

AliasLoader::setFacadeNamespace() — Method in class AliasLoader

Set the real-time facade namespace.

AliasLoader::setInstance() — Method in class AliasLoader

Set the value of the singleton alias loader.

$ Application#serviceProvidersProperty in class Application

All of the registered service providers.

$ Application#storagePathProperty in class Application

The custom storage path defined by the developer.

Application::setBasePath() — Method in class Application

Set the base path for the application.

Application::storagePath() — Method in class Application

Get the path to the storage directory.

Application::shouldSkipMiddleware() — Method in class Application

Determine if middleware has been disabled for the application.

Application::setDeferredServices() — Method in class Application

Set the application's deferred services.

Application::setLocale() — Method in class Application

Set the current application locale.

Application::setFallbackLocale() — Method in class Application

Set the current application fallback locale.

HandleExceptions::shouldIgnoreDeprecationErrors() — Method in class HandleExceptions

Determine if deprecation errors should be ignored.

LoadEnvironmentVariables::setEnvironmentFilePath() — Method in class LoadEnvironmentVariables

Load a custom environment file.

SetRequestForConsoleClass in namespace Illuminate\Foundation\Bootstrap
PendingDispatch::shouldDispatch() — Method in class PendingDispatch

Determine if the job should be dispatched.

$ CacheBasedMaintenanceMode#storeProperty in class CacheBasedMaintenanceMode

The cache store that should be utilized.

$ AboutCommand#signatureProperty in class AboutCommand

The console command signature.

AboutCommand::sections() — Method in class AboutCommand

Get the sections provided to the command.

CliDumper::supportsColors() — Method in class CliDumper
{@inheritDoc}
$ DocsCommand#signatureProperty in class DocsCommand

The name and signature of the console command.

$ DocsCommand#systemOsFamilyProperty in class DocsCommand

The operating system family.

DocsCommand::section() — Method in class DocsCommand

The section the user specifically asked to open.

DocsCommand::sectionsFor() — Method in class DocsCommand

The available sections for the page.

DocsCommand::searchQuery() — Method in class DocsCommand

The search query the user provided.

DocsCommand::setVersion() — Method in class DocsCommand

Set the documentation version.

DocsCommand::setUrlOpener() — Method in class DocsCommand

Set a custom URL opener.

DocsCommand::setSystemOsFamily() — Method in class DocsCommand

Set the system operating system family.

$ DownCommand#signatureProperty in class DownCommand

The console command signature.

$ EnvironmentDecryptCommand#signatureProperty in class EnvironmentDecryptCommand

The name and signature of the console command.

$ EnvironmentEncryptCommand#signatureProperty in class EnvironmentEncryptCommand

The name and signature of the console command.

$ EventCacheCommand#signatureProperty in class EventCacheCommand

The name and signature of the console command.

$ EventListCommand#signatureProperty in class EventListCommand

The name and signature of the console command.

EventListCommand::stringifyClosure() — Method in class EventListCommand

Get a displayable string representation of a Closure listener.

Kernel::scheduleCache() — Method in class Kernel

Get the name of the cache store that should manage scheduling mutexes.

Kernel::schedule() — Method in class Kernel

Define the application's command schedule.

Kernel::scheduleTimezone() — Method in class Kernel

Get the timezone that should be used by default for scheduled events.

Kernel::setArtisan() — Method in class Kernel

Set the Artisan application instance.

$ KeyGenerateCommand#signatureProperty in class KeyGenerateCommand

The name and signature of the console command.

KeyGenerateCommand::setKeyInEnvironmentFile() — Method in class KeyGenerateCommand

Set the application key in the environment file.

$ LangPublishCommand#signatureProperty in class LangPublishCommand

The name and signature of the console command.

$ PackageDiscoverCommand#signatureProperty in class PackageDiscoverCommand

The console command signature.

RouteListCommand::sortRoutes() — Method in class RouteListCommand

Sort the routes by a given element.

ScopeMakeCommandClass in namespace Illuminate\Foundation\Console
ServeCommandClass in namespace Illuminate\Foundation\Console
$ ServeCommand#serverRunningHasBeenDisplayedProperty in class ServeCommand

Indicates if the "Server running on..." output message has been displayed.

ServeCommand::startProcess() — Method in class ServeCommand

Start a new server process.

ServeCommand::serverCommand() — Method in class ServeCommand

Get the full server command.

StorageLinkCommandClass in namespace Illuminate\Foundation\Console
$ StorageLinkCommand#signatureProperty in class StorageLinkCommand

The console command signature.

StubPublishCommandClass in namespace Illuminate\Foundation\Console
$ StubPublishCommand#signatureProperty in class StubPublishCommand

The name and signature of the console command.

$ VendorPublishCommand#signatureProperty in class VendorPublishCommand

The console command signature.

VendorPublishCommand::status() — Method in class VendorPublishCommand

Write a status message to the console.

$ ViewCacheCommand#signatureProperty in class ViewCacheCommand

The name and signature of the console command.

$ PublishingStubs#stubsProperty in class PublishingStubs

The stubs being published.

Handler::shouldReport() — Method in class Handler

Determine if the exception should be reported.

Handler::shouldntReport() — Method in class Handler

Determine if the exception is in the "do not report" list.

Handler::stopIgnoring() — Method in class Handler

Remove the given exception class from the list of exceptions that should be ignored.

Handler::shouldReturnJson() — Method in class Handler

Determine if the exception handler response should be JSON.

$ ReportableHandler#shouldStopProperty in class ReportableHandler

Indicates if reporting should stop after invoking this handler.

ReportableHandler::stop() — Method in class ReportableHandler

Indicate that report handling should stop after invoking this callback.

$ FormRequest#stopOnFirstFailureProperty in class FormRequest

Indicates whether validation should stop after the first rule failure.

FormRequest::safe() — Method in class FormRequest

Get a validated input container for the validated input.

FormRequest::setValidator() — Method in class FormRequest

Set the Validator instance.

FormRequest::setRedirector() — Method in class FormRequest

Set the Redirector instance.

FormRequest::setContainer() — Method in class FormRequest

Set the container implementation.

Kernel::sendRequestThroughRouter() — Method in class Kernel

Send the given request through the middleware / router.

Kernel::syncMiddlewareToRouter() — Method in class Kernel

Sync the current state of the middleware to the router.

Kernel::setApplication() — Method in class Kernel

Set the Laravel application instance.

$ ConvertEmptyStringsToNull#skipCallbacksProperty in class ConvertEmptyStringsToNull

All of the registered skip callbacks.

ConvertEmptyStringsToNull::skipWhen() — Method in class ConvertEmptyStringsToNull

Register a callback that instructs the middleware to be skipped.

$ TrimStrings#skipCallbacksProperty in class TrimStrings

All of the registered skip callbacks.

TrimStrings::skipWhen() — Method in class TrimStrings

Register a callback that instructs the middleware to be skipped.

VerifyCsrfToken::shouldAddXsrfTokenCookie() — Method in class VerifyCsrfToken

Determine if the cookie should be added to the response.

VerifyCsrfToken::serialized() — Method in class VerifyCsrfToken

Determine if the cookie contents should be serialized.

ProviderRepository::shouldRecompile() — Method in class ProviderRepository

Determine if the manifest should be compiled.

$ FoundationServiceProvider#singletonsProperty in class FoundationServiceProvider

The singletons to register into the container.

$ EventServiceProvider#subscribeProperty in class EventServiceProvider

The subscribers to register.

EventServiceProvider::shouldDiscoverEvents() — Method in class EventServiceProvider

Determine if events and listeners should be automatically discovered.

RouteServiceProvider::setRootControllerNamespace() — Method in class RouteServiceProvider

Set the root controller namespace for the application.

InteractsWithContainer::swap() — Method in class InteractsWithContainer

Register an instance of an object in the container.

InteractsWithContainer::spy() — Method in class InteractsWithContainer

Spy an instance of an object in the container.

InteractsWithDatabase::seed() — Method in class InteractsWithDatabase

Seed a given database connection.

InteractsWithExceptionHandling::shouldReport() — Method in class InteractsWithExceptionHandling

Determine if the exception should be reported.

InteractsWithRedis::setUpRedis() — Method in class InteractsWithRedis

Setup redis connection.

InteractsWithSession::session() — Method in class InteractsWithSession

Set the session to the given array.

InteractsWithSession::startSession() — Method in class InteractsWithSession

Start the session for the application.

$ MakesHttpRequests#serverVariablesProperty in class MakesHttpRequests

Additional server variables for the request.

$ TestCase#setUpHasRunProperty in class TestCase

Indicates if we have made it through the base setUp function.

TestCase::setUp() — Method in class TestCase

Setup the test environment.

TestCase::setUpTraits() — Method in class TestCase

Boot the testing helper traits.

CanConfigureMigrationCommands::shouldDropViews() — Method in class CanConfigureMigrationCommands

Determine if views should be dropped when refreshing the database.

CanConfigureMigrationCommands::shouldDropTypes() — Method in class CanConfigureMigrationCommands

Determine if types should be dropped when refreshing the database.

CanConfigureMigrationCommands::shouldSeed() — Method in class CanConfigureMigrationCommands

Determine if the seed task should be run when refreshing the database.

CanConfigureMigrationCommands::seeder() — Method in class CanConfigureMigrationCommands

Determine the specific seeder class that should be used when refreshing the database.

WithFaker::setUpFaker() — Method in class WithFaker

Setup up the Faker instance.

Wormhole::second() — Method in class Wormhole

Travel forward the given number of seconds.

Wormhole::seconds() — Method in class Wormhole

Travel forward the given number of seconds.

$ Vite#scriptTagAttributesResolversProperty in class Vite

The script tag attributes resolvers.

$ Vite#styleTagAttributesResolversProperty in class Vite

The style tag attributes resolvers.

ArgonHasher::setMemory() — Method in class ArgonHasher

Set the default password memory factor.

ArgonHasher::setTime() — Method in class ArgonHasher

Set the default password timing factor.

ArgonHasher::setThreads() — Method in class ArgonHasher

Set the default password threads factor.

BcryptHasher::setRounds() — Method in class BcryptHasher

Set the default password work factor.

$ Factory#stubCallbacksProperty in class Factory

The stub callables that will handle requests.

Factory::sequence() — Method in class Factory

Get an invokable object that returns a sequence of responses in order for use during stubbing.

Factory::stubUrl() — Method in class Factory

Stub the given URL using the given callback.

$ PendingRequest#stubCallbacksProperty in class PendingRequest

The stub callables that will handle requests.

PendingRequest::sink() — Method in class PendingRequest

Specify the path where the body of the response should be stored.

PendingRequest::send() — Method in class PendingRequest

Send the request to the given URL.

PendingRequest::sendRequest() — Method in class PendingRequest

Send a request either synchronously or asynchronously.

PendingRequest::sinkStubHandler() — Method in class PendingRequest

Get the sink stub handler callback.

PendingRequest::stub() — Method in class PendingRequest

Register a stub callable that will intercept requests and be able to return stub responses.

PendingRequest::setClient() — Method in class PendingRequest

Set the client instance.

PendingRequest::setHandler() — Method in class PendingRequest

Create a new client instance using the given handler.

Response::status() — Method in class Response

Get the status code of the response.

Response::successful() — Method in class Response

Determine if the request was successful.

Response::serverError() — Method in class Response

Determine if the response indicates a server error occurred.

InteractsWithInput::server() — Method in class InteractsWithInput

Retrieve a server variable from the request.

InteractsWithInput::str() — Method in class InteractsWithInput

Retrieve input from the request as a Stringable instance.

InteractsWithInput::string() — Method in class InteractsWithInput

Retrieve input from the request as a Stringable instance.

JsonResponse::setData() — Method in class JsonResponse
{@inheritdoc}
JsonResponse::setEncodingOptions() — Method in class JsonResponse
{@inheritdoc}
SetCacheHeadersClass in namespace Illuminate\Http\Middleware
TrustHosts::shouldSpecifyTrustedHosts() — Method in class TrustHosts

Determine if the application should specify trusted hosts.

TrustProxies::setTrustedProxyIpAddresses() — Method in class TrustProxies

Sets the trusted proxies on the request.

TrustProxies::setTrustedProxyIpAddressesToSpecificIps() — Method in class TrustProxies

Specify the IP addresses to trust explicitly.

TrustProxies::setTrustedProxyIpAddressesToTheCallingIp() — Method in class TrustProxies

Set the trusted proxy to be the IP address calling this servers.

$ RedirectResponse#sessionProperty in class RedirectResponse

The session store instance.

RedirectResponse::setRequest() — Method in class RedirectResponse

Set the request instance.

RedirectResponse::setSession() — Method in class RedirectResponse

Set the session store instance.

Request::segment() — Method in class Request

Get a segment from the URI (1 based index).

Request::segments() — Method in class Request

Get all of the segments for the request path.

Request::schemeAndHttpHost() — Method in class Request

Get the scheme and HTTP host.

Request::secure() — Method in class Request

Determine if the request is over HTTPS.

Request::session() — Method in class Request

Get the session associated with the request.

Request::setLaravelSession() — Method in class Request

Set the session instance on the request.

Request::setRequestLocale() — Method in class Request

Set the locale for the request instance.

Request::setDefaultRequestLocale() — Method in class Request

Set the default locale for the request instance.

Request::setJson() — Method in class Request

Set the JSON payload for the request.

Request::setUserResolver() — Method in class Request

Set the user resolver callback.

Request::setRouteResolver() — Method in class Request

Set the route resolver callback.

Response::setContent() — Method in class Response

Set the content on the response.

Response::shouldBeJson() — Method in class Response

Determine if the given content should be turned into JSON.

ResponseTrait::status() — Method in class ResponseTrait

Get the status code for the response.

ResponseTrait::statusText() — Method in class ResponseTrait

Get the status text for the response.

$ File#sizeToReportProperty in class File

The "size" to report.

File::size() — Method in class File

Set the "size" of the file in kilobytes.

MimeType::search() — Method in class MimeType

Search for the extension of a given MIME type.

UploadedFile::store() — Method in class UploadedFile

Store the uploaded file on a filesystem disk.

UploadedFile::storePublicly() — Method in class UploadedFile

Store the uploaded file on a filesystem disk with public visibility.

UploadedFile::storePubliclyAs() — Method in class UploadedFile

Store the uploaded file on a filesystem disk with public visibility.

UploadedFile::storeAs() — Method in class UploadedFile

Store the uploaded file on a filesystem disk.

$ LogManager#sharedContextProperty in class LogManager

The context shared across channels and stacks.

LogManager::stack() — Method in class LogManager

Create a new, on-demand aggregate logger instance.

LogManager::shareContext() — Method in class LogManager

Share context across channels and stacks.

LogManager::sharedContext() — Method in class LogManager

The context shared across channels and stacks.

LogManager::setDefaultDriver() — Method in class LogManager

Set the default log driver name.

Logger::setEventDispatcher() — Method in class Logger

Set the event dispatcher instance.

$ MessageSent#sentProperty in class MessageSent

The message that was sent.

MailManager::setGlobalAddress() — Method in class MailManager

Set a global address on the mailer by type.

MailManager::setDefaultDriver() — Method in class MailManager

Set the default mail driver name.

MailManager::setApplication() — Method in class MailManager

Set the application instance used by the manager.

$ Mailable#subjectProperty in class Mailable

The subject of the message.

Mailable::send() — Method in class Mailable

Send the message using the given mailer.

Mailable::setAddress() — Method in class Mailable

Set the recipients of the message.

Mailable::subject() — Method in class Mailable

Set the subject of the message.

$ Envelope#subjectProperty in class Envelope

The subject of the message.

Envelope::subject() — Method in class Envelope

Set the subject of the message.

Mailer::send() — Method in class Mailer

Send a new message using a view.

Mailer::sendMailable() — Method in class Mailer

Send the given mailable.

Mailer::setGlobalToAndRemoveCcAndBcc() — Method in class Mailer

Set the global "to" address on the given message.

Mailer::sendSymfonyMessage() — Method in class Mailer

Send a Symfony Email instance.

Mailer::shouldSendMessage() — Method in class Mailer

Determines if the email can be sent.

Mailer::setSymfonyTransport() — Method in class Mailer

Set the Symfony Transport instance.

Mailer::setQueue() — Method in class Mailer

Set the queue manager instance.

Message::sender() — Method in class Message

Set the "sender" of the message.

Message::subject() — Method in class Message

Set the subject of the message.

PendingMail::send() — Method in class PendingMail

Send a new mailable message instance.

SendQueuedMailableClass in namespace Illuminate\Mail
$ SendQueuedMailable#shouldBeEncryptedProperty in class SendQueuedMailable

Indicates if the job should be encrypted.

SentMessageClass in namespace Illuminate\Mail
$ SentMessage#sentMessageProperty in class SentMessage

The Symfony SentMessage instance.

ArrayTransport::send() — Method in class ArrayTransport
{@inheritdoc}
LogTransport::send() — Method in class LogTransport
{@inheritdoc}
SesTransportClass in namespace Illuminate\Mail\Transport
$ SesTransport#sesProperty in class SesTransport

The Amazon SES instance.

SesTransport::ses() — Method in class SesTransport

Get the Amazon SES client for the SesTransport instance.

SesTransport::setOptions() — Method in class SesTransport

Set the transmission options being used by the transport.

SesV2TransportClass in namespace Illuminate\Mail\Transport
$ SesV2Transport#sesProperty in class SesV2Transport

The Amazon SES V2 instance.

SesV2Transport::ses() — Method in class SesV2Transport

Get the Amazon SES V2 client for the SesV2Transport instance.

SesV2Transport::setOptions() — Method in class SesV2Transport

Set the transmission options being used by the transport.

ChannelManager::send() — Method in class ChannelManager

Send the given notification to the given notifiable entities.

ChannelManager::sendNow() — Method in class ChannelManager

Send the given notification immediately.

BroadcastChannel::send() — Method in class BroadcastChannel

Send the given notification.

DatabaseChannel::send() — Method in class DatabaseChannel

Send the given notification.

MailChannel::send() — Method in class MailChannel

Send the given notification.

DatabaseNotification::scopeRead() — Method in class DatabaseNotification

Scope a query to only include read notifications.

DatabaseNotification::scopeUnread() — Method in class DatabaseNotification

Scope a query to only include unread notifications.

SimpleMessageClass in namespace Illuminate\Notifications\Messages
$ SimpleMessage#subjectProperty in class SimpleMessage

The subject of the notification.

$ SimpleMessage#salutationProperty in class SimpleMessage

The notification's salutation.

SimpleMessage::success() — Method in class SimpleMessage

Indicate that the notification gives information about a successful operation.

SimpleMessage::subject() — Method in class SimpleMessage

Set the subject of the notification.

SimpleMessage::salutation() — Method in class SimpleMessage

Set the salutation of the notification.

NotificationSender::send() — Method in class NotificationSender

Send the given notification to the given notifiable entities.

NotificationSender::sendNow() — Method in class NotificationSender

Send the given notification immediately.

NotificationSender::sendToNotifiable() — Method in class NotificationSender

Send the given notification to the given notifiable via a channel.

NotificationSender::shouldSendNotification() — Method in class NotificationSender

Determines if the notification can be sent.

SendQueuedNotificationsClass in namespace Illuminate\Notifications
$ SendQueuedNotifications#shouldBeEncryptedProperty in class SendQueuedNotifications

Indicates if the job should be encrypted.

AbstractCursorPaginator::setCursorName() — Method in class AbstractCursorPaginator

Set the query string variable used to store the cursor.

AbstractCursorPaginator::setPath() — Method in class AbstractCursorPaginator

Set the base path to assign to all URLs.

AbstractCursorPaginator::setCollection() — Method in class AbstractCursorPaginator

Set the paginator's underlying collection.

AbstractPaginator::setPageName() — Method in class AbstractPaginator

Set the query string variable used to store the page.

AbstractPaginator::setPath() — Method in class AbstractPaginator

Set the base path to assign to all URLs.

AbstractPaginator::setCollection() — Method in class AbstractPaginator

Set the paginator's underlying collection.

CursorPaginator::setItems() — Method in class CursorPaginator

Set the items for the paginator.

LengthAwarePaginator::setCurrentPage() — Method in class LengthAwarePaginator

Get the current page for the request.

Paginator::setCurrentPage() — Method in class Paginator

Get the current page for the request.

Paginator::setItems() — Method in class Paginator

Set the items for the paginator.

Hub::setContainer() — Method in class Hub

Set the container instance used by the hub.

Pipeline::send() — Method in class Pipeline

Set the object being sent through the pipeline.

Pipeline::setContainer() — Method in class Pipeline

Set the container instance.

Factory::sequence() — Method in class Factory

Begin describing a fake process sequence.

FakeInvokedProcess::signal() — Method in class FakeInvokedProcess

Send a signal to the process.

FakeProcessResult::successful() — Method in class FakeProcessResult

Determine if the process was successful.

FakeProcessResult::seeInOutput() — Method in class FakeProcessResult

Determine if the output contains the given string.

FakeProcessResult::seeInErrorOutput() — Method in class FakeProcessResult

Determine if the error output contains the given string.

InvokedProcess::signal() — Method in class InvokedProcess

Send a signal to the process.

InvokedProcessPool::signal() — Method in class InvokedProcessPool

Send a signal to each running process in the pool, returning the processes that were signalled.

PendingProcess::start() — Method in class PendingProcess

Start the process in the background.

Pool::start() — Method in class Pool

Start all of the processes in the pool.

ProcessResult::successful() — Method in class ProcessResult

Determine if the process was successful.

ProcessResult::seeInOutput() — Method in class ProcessResult

Determine if the output contains the given string.

ProcessResult::seeInErrorOutput() — Method in class ProcessResult

Determine if the error output contains the given string.

BeanstalkdQueue::size() — Method in class BeanstalkdQueue

Get the size of the queue.

CallQueuedHandler::setJobInstanceIfNecessary() — Method in class CallQueuedHandler

Set the job instance of the given class if necessary.

Manager::setupDefaultConfiguration() — Method in class Manager

Setup the default queue configuration options.

Manager::setupManager() — Method in class Manager

Build the queue manager instance.

SqsConnectorClass in namespace Illuminate\Queue\Connectors
SyncConnectorClass in namespace Illuminate\Queue\Connectors
$ FlushFailedCommand#signatureProperty in class FlushFailedCommand

The console command name.

$ ForgetFailedCommand#signatureProperty in class ForgetFailedCommand

The console command signature.

$ ListenCommand#signatureProperty in class ListenCommand

The console command name.

ListenCommand::setOutputHandler() — Method in class ListenCommand

Set the options on the queue listener.

$ MonitorCommand#signatureProperty in class MonitorCommand

The console command name.

$ PruneBatchesCommand#signatureProperty in class PruneBatchesCommand

The console command signature.

$ PruneFailedJobsCommand#signatureProperty in class PruneFailedJobsCommand

The console command signature.

$ RetryBatchCommand#signatureProperty in class RetryBatchCommand

The console command signature.

$ RetryCommand#signatureProperty in class RetryCommand

The console command signature.

$ WorkCommand#signatureProperty in class WorkCommand

The console command name.

DatabaseQueue::size() — Method in class DatabaseQueue

Get the size of the queue.

$ QueueBusy#sizeProperty in class QueueBusy

The size of the queue.

$ WorkerStopping#statusProperty in class WorkerStopping

The worker exit status.

InteractsWithQueue::setJob() — Method in class InteractsWithQueue

Set the base queue job instance.

Job::shouldFailOnTimeout() — Method in class Job

Determine if the job should fail when it timeouts.

SqsJobClass in namespace Illuminate\Queue\Jobs
$ SqsJob#sqsProperty in class SqsJob

The Amazon SQS client instance.

SyncJobClass in namespace Illuminate\Queue\Jobs
$ Listener#sleepProperty in class Listener

The amount of seconds to wait before polling the queue.

Listener::stop() — Method in class Listener

Stop listening and bail out of the script.

Listener::setOutputHandler() — Method in class Listener

Set the output handler callback.

LuaScripts::size() — Method in class LuaScripts

Get the Lua script for computing the size of queue.

$ RateLimited#shouldReleaseProperty in class RateLimited

Indicates if the job should be released if the limit is exceeded.

SkipIfBatchCancelledClass in namespace Illuminate\Queue\Middleware
$ WithoutOverlapping#shareKeyProperty in class WithoutOverlapping

Share the key across different jobs.

WithoutOverlapping::shared() — Method in class WithoutOverlapping

Indicate that the lock key should be shared across job classes.

NullQueue::size() — Method in class NullQueue

Get the size of the queue.

Queue::shouldDispatchAfterCommit() — Method in class Queue

Determine if the job should be dispatched after all database transactions have committed.

Queue::setConnectionName() — Method in class Queue

Set the connection name for the queue.

Queue::setContainer() — Method in class Queue

Set the IoC container instance.

QueueManager::stopping() — Method in class QueueManager

Register an event listener for the daemon queue stopping.

QueueManager::setDefaultDriver() — Method in class QueueManager

Set the name of the default queue connection.

QueueManager::setApplication() — Method in class QueueManager

Set the application instance used by the manager.

RedisQueue::size() — Method in class RedisQueue

Get the size of the queue.

SerializesAndRestoresModelIdentifiersClass in namespace Illuminate\Queue
SerializesModelsClass in namespace Illuminate\Queue
SqsQueueClass in namespace Illuminate\Queue
$ SqsQueue#sqsProperty in class SqsQueue

The Amazon SQS instance.

$ SqsQueue#suffixProperty in class SqsQueue

The queue name suffix.

SqsQueue::size() — Method in class SqsQueue

Get the size of the queue.

SqsQueue::suffixQueue() — Method in class SqsQueue

Add the given suffix to the given queue name.

SyncQueueClass in namespace Illuminate\Queue
SyncQueue::size() — Method in class SyncQueue

Get the size of the queue.

$ Worker#shouldQuitProperty in class Worker

Indicates if the worker should exit.

Worker::stopIfNecessary() — Method in class Worker

Determine the exit code to stop the process if necessary.

Worker::stopWorkerIfLostConnection() — Method in class Worker

Stop the worker if we have lost connection to a database.

Worker::supportsAsyncSignals() — Method in class Worker

Determine if "async" signals are supported.

Worker::stop() — Method in class Worker

Stop listening and bail out of the script.

Worker::sleep() — Method in class Worker

Sleep the script for a given number of seconds.

Worker::setCache() — Method in class Worker

Set the cache repository implementation.

Worker::setName() — Method in class Worker

Set the name of the worker.

Worker::setManager() — Method in class Worker

Set the queue manager instance.

$ WorkerOptions#sleepProperty in class WorkerOptions

The number of seconds to wait in between polling the queue.

$ WorkerOptions#stopWhenEmptyProperty in class WorkerOptions

Indicates if the worker should stop when the queue is empty.

Connection::subscribe() — Method in class Connection

Subscribe to a set of given channels for messages.

Connection::setName() — Method in class Connection

Set the connections name.

Connection::setEventDispatcher() — Method in class Connection

Set the event dispatcher instance on the connection.

$ PacksPhpRedisValues#supportsPackingProperty in class PacksPhpRedisValues

Indicates if Redis supports packing.

$ PacksPhpRedisValues#supportsLzfProperty in class PacksPhpRedisValues

Indicates if Redis supports LZF compression.

$ PacksPhpRedisValues#supportsZstdProperty in class PacksPhpRedisValues

Indicates if Redis supports Zstd compression.

PacksPhpRedisValues::supportsPacking() — Method in class PacksPhpRedisValues

Determine if the current PhpRedis extension version supports packing.

PacksPhpRedisValues::supportsLzf() — Method in class PacksPhpRedisValues

Determine if the current PhpRedis extension version supports LZF compression.

PacksPhpRedisValues::supportsZstd() — Method in class PacksPhpRedisValues

Determine if the current PhpRedis extension version supports Zstd compression.

PhpRedisConnection::set() — Method in class PhpRedisConnection

Set the string value in the argument as the value of the key.

PhpRedisConnection::setnx() — Method in class PhpRedisConnection

Set the given key if it doesn't exist.

PhpRedisConnection::spop() — Method in class PhpRedisConnection

Removes and returns a random element from the set value at key.

PhpRedisConnection::scan() — Method in class PhpRedisConnection

Scans all keys based on options.

PhpRedisConnection::sscan() — Method in class PhpRedisConnection

Scans the given set for all values based on options.

PhpRedisConnection::subscribe() — Method in class PhpRedisConnection

Subscribe to a set of given channels for messages.

$ ConcurrencyLimiterBuilder#sleepProperty in class ConcurrencyLimiterBuilder

The number of milliseconds to wait between attempts to acquire the lock.

ConcurrencyLimiterBuilder::sleep() — Method in class ConcurrencyLimiterBuilder

The number of milliseconds to wait between lock acquisition attempts.

$ DurationLimiterBuilder#sleepProperty in class DurationLimiterBuilder

The number of milliseconds to wait between attempts to acquire the lock.

DurationLimiterBuilder::sleep() — Method in class DurationLimiterBuilder

The number of milliseconds to wait between lock acquisition attempts.

RedisManager::setDriver() — Method in class RedisManager

Set the default driver.

CompiledRouteCollection::setRouter() — Method in class CompiledRouteCollection

Set the router instance on the route.

CompiledRouteCollection::setContainer() — Method in class CompiledRouteCollection

Set the container instance on the route.

StreamedResponseExceptionClass in namespace Illuminate\Routing\Exceptions
SchemeValidatorClass in namespace Illuminate\Routing\Matching
SubstituteBindingsClass in namespace Illuminate\Routing\Middleware
PendingResourceRegistration::shallow() — Method in class PendingResourceRegistration

Indicate that the resource routes should have "shallow" nesting.

PendingResourceRegistration::scoped() — Method in class PendingResourceRegistration

Indicate that the resource routes should be scoped using the given binding fields.

$ Redirector#sessionProperty in class Redirector

The session store instance.

Redirector::secure() — Method in class Redirector

Create a new redirect response to the given HTTPS path.

Redirector::signedRoute() — Method in class Redirector

Create a new redirect response to a signed named route.

Redirector::setSession() — Method in class Redirector

Set the active session store.

Redirector::setIntendedUrl() — Method in class Redirector

Set the "intended" URL in the session.

$ ResourceRegistrar#singletonResourceDefaultsProperty in class ResourceRegistrar

The default actions for a singleton resource controller.

$ ResourceRegistrar#singularParametersProperty in class ResourceRegistrar

Singular global parameters.

ResourceRegistrar::singleton() — Method in class ResourceRegistrar

Route a singleton resource to a controller.

ResourceRegistrar::setResourceBindingFields() — Method in class ResourceRegistrar

Set the route's binding fields if the resource is scoped.

ResourceRegistrar::singularParameters() — Method in class ResourceRegistrar

Set or unset the unmapped global parameters to singular.

ResourceRegistrar::setParameters() — Method in class ResourceRegistrar

Set the global parameter mapping.

ResponseFactory::stream() — Method in class ResponseFactory

Create a new streamed response instance.

ResponseFactory::streamDownload() — Method in class ResponseFactory

Create a new streamed response instance as a file download.

Route::setParameter() — Method in class Route

Set a parameter to the given value.

Route::signatureParameters() — Method in class Route

Get the parameters that are listed in the route / controller signature.

Route::setBindingFields() — Method in class Route

Set the binding fields for the route.

Route::setDefaults() — Method in class Route

Set the default values for the route.

Route::setWheres() — Method in class Route

Set a list of regular expression requirements on the route.

Route::setFallback() — Method in class Route

Set the fallback value.

Route::secure() — Method in class Route

Determine if the route only responds to HTTPS requests.

Route::setUri() — Method in class Route

Set the URI that the route responds to.

Route::setAction() — Method in class Route

Set the action array for the route.

Route::staticallyProvidedControllerMiddleware() — Method in class Route

Get the statically provided controller middleware for the given class and method.

Route::scopeBindings() — Method in class Route

Indicate that the route should enforce scoping of multiple implicit Eloquent bindings.

Route::setRouter() — Method in class Route

Set the router instance on the route.

Route::setContainer() — Method in class Route

Set the container instance on the route.

RouteDependencyResolverTrait::spliceIntoParameters() — Method in class RouteDependencyResolverTrait

Splice the given value into the parameter list.

RouteRegistrar::singleton() — Method in class RouteRegistrar

Route a singleton resource to a controller.

RouteRegistrar::scopeBindings() — Method in class RouteRegistrar
Router::singletons() — Method in class Router

Register an array of singleton resource controllers.

Router::singleton() — Method in class Router

Route a singleton resource to a controller.

Router::sortMiddleware() — Method in class Router

Sort the given middleware by priority.

Router::substituteBindings() — Method in class Router

Substitute the route bindings onto the route.

Router::substituteImplicitBindings() — Method in class Router

Substitute the implicit route bindings for the given route.

Router::singularResourceParameters() — Method in class Router

Set the unmapped global resource parameters to singular.

Router::setRoutes() — Method in class Router

Set the route collection instance.

Router::setCompiledRoutes() — Method in class Router

Set the compiled route collection instance.

Router::setContainer() — Method in class Router

Set the container instance used by the router.

SortedMiddlewareClass in namespace Illuminate\Routing
SortedMiddleware::sortMiddleware() — Method in class SortedMiddleware

Sort the middlewares by the given priority map.

$ UrlGenerator#sessionResolverProperty in class UrlGenerator

The session resolver callable.

UrlGenerator::secure() — Method in class UrlGenerator

Generate a secure, absolute URL to the given path.

UrlGenerator::secureAsset() — Method in class UrlGenerator

Generate the URL to a secure asset.

UrlGenerator::signedRoute() — Method in class UrlGenerator

Create a signed route URL for a named route.

UrlGenerator::signatureHasNotExpired() — Method in class UrlGenerator

Determine if the expires timestamp from the given request is not from the past.

UrlGenerator::setRequest() — Method in class UrlGenerator

Set the current request instance.

UrlGenerator::setRoutes() — Method in class UrlGenerator

Set the route collection.

UrlGenerator::setSessionResolver() — Method in class UrlGenerator

Set the session resolver for the generator.

UrlGenerator::setKeyResolver() — Method in class UrlGenerator

Set the encryption key resolver.

UrlGenerator::setRootControllerNamespace() — Method in class UrlGenerator

Set the root controller namespace.

$ ArraySessionHandler#storageProperty in class ArraySessionHandler

The array of stored values.

SessionTableCommandClass in namespace Illuminate\Session\Console
CookieSessionHandler::setRequest() — Method in class CookieSessionHandler

Set the request instance.

DatabaseSessionHandler::setContainer() — Method in class DatabaseSessionHandler

Set the application instance used by the handler.

DatabaseSessionHandler::setExists() — Method in class DatabaseSessionHandler

Set the existence state for the session.

ExistenceAwareInterface::setExists() — Method in class ExistenceAwareInterface

Set the existence state for the session.

AuthenticateSession::storePasswordHashInSession() — Method in class AuthenticateSession

Store the user's current password hash in the session.

StartSessionClass in namespace Illuminate\Session\Middleware
StartSession::startSession() — Method in class StartSession

Start the session for the given request.

StartSession::storeCurrentUrl() — Method in class StartSession

Store the current URL for the request if necessary.

StartSession::saveSession() — Method in class StartSession

Save the session data to storage.

StartSession::sessionConfigured() — Method in class StartSession

Determine if a session driver has been configured.

StartSession::sessionIsPersistent() — Method in class StartSession

Determine if the configured session driver is persistent.

SessionManagerClass in namespace Illuminate\Session
SessionManager::shouldBlock() — Method in class SessionManager

Determine if requests for the same session should wait for each to finish before executing.

SessionManager::setDefaultDriver() — Method in class SessionManager

Set the default session driver name.

SessionServiceProviderClass in namespace Illuminate\Session
StoreClass in namespace Illuminate\Session
$ Store#serializationProperty in class Store

The session store's serialization strategy.

$ Store#startedProperty in class Store

Session store started status.

Store::start() — Method in class Store

Start the session, reading the data from a handler.

Store::save() — Method in class Store

Save the session data to storage.

Store::setName() — Method in class Store

Set the name of the session.

Store::setId() — Method in class Store

Set the session ID.

Store::setExists() — Method in class Store

Set the existence of the session on the handler if applicable.

Store::setPreviousUrl() — Method in class Store

Set the "previous" URL in the session.

Store::setHandler() — Method in class Store

Set the underlying session handler implementation.

Store::setRequestOnHandler() — Method in class Store

Set the request on the handler instance.

SymfonySessionDecoratorClass in namespace Illuminate\Session
$ SymfonySessionDecorator#storeProperty in class SymfonySessionDecorator

The underlying Laravel session store.

SymfonySessionDecorator::start() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::setId() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::setName() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::save() — Method in class SymfonySessionDecorator
{@inheritdoc}
SymfonySessionDecorator::set() — Method in class SymfonySessionDecorator
{@inheritdoc}
Arr::set() — Method in class Arr

Set an array item to a given value using "dot" notation.

Arr::shuffle() — Method in class Arr

Shuffle the given array and return the result.

Arr::sort() — Method in class Arr

Sort the array using the given callback or "dot" notation.

Arr::sortDesc() — Method in class Arr

Sort the array in descending order using the given callback or "dot" notation.

Arr::sortRecursive() — Method in class Arr

Recursively sort an array by keys and values.

Carbon::setTestNow() — Method in class Carbon
{@inheritdoc}
Collection::search() — Method in class Collection

Search the collection for a given value and return the corresponding key if successful.

Collection::shift() — Method in class Collection
Collection::shuffle() — Method in class Collection

Shuffle the items in the collection.

Collection::sliding() — Method in class Collection
Collection::skip() — Method in class Collection

Skip the first {$count} items.

Collection::skipUntil() — Method in class Collection

Skip items in the collection until the given condition is met.

Collection::skipWhile() — Method in class Collection

Skip items in the collection while the given condition is met.

Collection::slice() — Method in class Collection

Slice the underlying collection array.

Collection::split() — Method in class Collection
Collection::splitIn() — Method in class Collection
Collection::sole() — Method in class Collection

Get the first item in the collection, but only if exactly one item exists. Otherwise, throw an exception.

Collection::sort() — Method in class Collection

Sort through each item with a callback.

Collection::sortDesc() — Method in class Collection

Sort items in descending order.

Collection::sortBy() — Method in class Collection

Sort the collection using the given callback.

Collection::sortByMany() — Method in class Collection

Sort the collection using multiple comparisons.

Collection::sortByDesc() — Method in class Collection

Sort the collection in descending order using the given callback.

Collection::sortKeys() — Method in class Collection

Sort the collection keys.

Collection::sortKeysDesc() — Method in class Collection

Sort the collection keys in descending order.

Collection::sortKeysUsing() — Method in class Collection

Sort the collection keys using a callback.

Collection::splice() — Method in class Collection

Splice a portion of the underlying collection array.

Composer::setWorkingPath() — Method in class Composer

Set the working path used by the class.

DateFactory::serializeUsing() — Method in class DateFactory
DateFactory::setHumanDiffOptions() — Method in class DateFactory
DateFactory::setLocale() — Method in class DateFactory
DateFactory::setMidDayAt() — Method in class DateFactory
DateFactory::setTestNow() — Method in class DateFactory
DateFactory::setToStringFormat() — Method in class DateFactory
DateFactory::setTranslator() — Method in class DateFactory
DateFactory::setUtf8() — Method in class DateFactory
DateFactory::setWeekEndsAt() — Method in class DateFactory
DateFactory::setWeekStartsAt() — Method in class DateFactory
DateFactory::setWeekendDays() — Method in class DateFactory
DateFactory::shouldOverflowMonths() — Method in class DateFactory
DateFactory::shouldOverflowYears() — Method in class DateFactory
DateFactory::singularUnit() — Method in class DateFactory
Enumerable::some() — Method in class Enumerable

Alias for the "contains" method.

Enumerable::search() — Method in class Enumerable

Search the collection for a given value and return the corresponding key if successful.

Enumerable::shuffle() — Method in class Enumerable

Shuffle the items in the collection.

Enumerable::sliding() — Method in class Enumerable
Enumerable::skip() — Method in class Enumerable

Skip the first {$count} items.

Enumerable::skipUntil() — Method in class Enumerable

Skip items in the collection until the given condition is met.

Enumerable::skipWhile() — Method in class Enumerable

Skip items in the collection while the given condition is met.

Enumerable::slice() — Method in class Enumerable

Get a slice of items from the enumerable.

Enumerable::split() — Method in class Enumerable
Enumerable::sole() — Method in class Enumerable

Get the first item in the collection, but only if exactly one item exists. Otherwise, throw an exception.

Enumerable::splitIn() — Method in class Enumerable
Enumerable::sort() — Method in class Enumerable

Sort through each item with a callback.

Enumerable::sortDesc() — Method in class Enumerable

Sort items in descending order.

Enumerable::sortBy() — Method in class Enumerable

Sort the collection using the given callback.

Enumerable::sortByDesc() — Method in class Enumerable

Sort the collection in descending order using the given callback.

Enumerable::sortKeys() — Method in class Enumerable

Sort the collection keys.

Enumerable::sortKeysDesc() — Method in class Enumerable

Sort the collection keys in descending order.

Enumerable::sortKeysUsing() — Method in class Enumerable

Sort the collection keys using a callback.

Enumerable::sum() — Method in class Enumerable

Get the sum of the given values.

App::setBasePath() — Method in class App
App::storagePath() — Method in class App
App::shouldSkipMiddleware() — Method in class App
App::setDeferredServices() — Method in class App
App::setLocale() — Method in class App
App::setFallbackLocale() — Method in class App
App::singleton() — Method in class App
App::singletonIf() — Method in class App
App::scoped() — Method in class App
App::scopedIf() — Method in class App
App::setInstance() — Method in class App
Artisan::setArtisan() — Method in class Artisan
Auth::shouldUse() — Method in class Auth
Auth::setDefaultDriver() — Method in class Auth
Auth::setApplication() — Method in class Auth
Auth::setUser() — Method in class Auth
Auth::setRememberDuration() — Method in class Auth
Auth::setCookieJar() — Method in class Auth
Auth::setDispatcher() — Method in class Auth
Auth::setRequest() — Method in class Auth
Auth::setProvider() — Method in class Auth
Blade::setPath() — Method in class Blade
Blade::stripParentheses() — Method in class Blade
Blade::setEchoFormat() — Method in class Blade
Blade::sanitizeComponentAttribute() — Method in class Blade
Blade::stringable() — Method in class Blade
Broadcast::socket() — Method in class Broadcast
Broadcast::setDefaultDriver() — Method in class Broadcast
Broadcast::setApplication() — Method in class Broadcast
Cache::store() — Method in class Cache
Cache::setDefaultDriver() — Method in class Cache
Cache::set() — Method in class Cache
Cache::setMultiple() — Method in class Cache
Cache::sear() — Method in class Cache
Cache::supportsTags() — Method in class Cache
Cache::setDefaultCacheTime() — Method in class Cache
Cache::setStore() — Method in class Cache
Cache::setEventDispatcher() — Method in class Cache
Config::set() — Method in class Config
Cookie::setDefaultPathAndDomain() — Method in class Cookie
Crypt::supported() — Method in class Crypt
DB::setDefaultConnection() — Method in class DB
DB::supportedDrivers() — Method in class DB
DB::setReconnector() — Method in class DB
DB::setApplication() — Method in class DB
DB::selectOne() — Method in class DB
DB::scalar() — Method in class DB
DB::selectFromWriteConnection() — Method in class DB
DB::select() — Method in class DB
DB::statement() — Method in class DB
DB::setRecordModificationState() — Method in class DB
DB::setPdo() — Method in class DB
DB::setReadPdo() — Method in class DB
DB::setQueryGrammar() — Method in class DB
DB::setSchemaGrammar() — Method in class DB
DB::setPostProcessor() — Method in class DB
DB::setEventDispatcher() — Method in class DB
DB::setTransactionManager() — Method in class DB
DB::setDatabaseName() — Method in class DB
DB::setReadWriteType() — Method in class DB
DB::setTablePrefix() — Method in class DB
Date::serializeUsing() — Method in class Date
Date::setHumanDiffOptions() — Method in class Date
Date::setLocale() — Method in class Date
Date::setMidDayAt() — Method in class Date
Date::setTestNow() — Method in class Date
Date::setToStringFormat() — Method in class Date
Date::setTranslator() — Method in class Date
Date::setUtf8() — Method in class Date
Date::setWeekEndsAt() — Method in class Date
Date::setWeekStartsAt() — Method in class Date
Date::setWeekendDays() — Method in class Date
Date::shouldOverflowMonths() — Method in class Date
Date::shouldOverflowYears() — Method in class Date
Date::singularUnit() — Method in class Date
Event::subscribe() — Method in class Event
Event::setQueueResolver() — Method in class Event
Facade::spy() — Method in class Facade

Convert the facade into a Mockery spy.

Facade::shouldReceive() — Method in class Facade

Initiate a mock expectation on the facade.

Facade::swap() — Method in class Facade

Hotswap the underlying instance behind the facade.

Facade::setFacadeApplication() — Method in class Facade

Set the application instance.

File::sharedGet() — Method in class File
File::size() — Method in class File
Gate::setContainer() — Method in class Gate
Hash::setContainer() — Method in class Hash
Http::stubUrl() — Method in class Http

Stub the given URL using the given callback.

Http::sequence() — Method in class Http
Http::sink() — Method in class Http
Http::send() — Method in class Http
Http::stub() — Method in class Http
Http::setClient() — Method in class Http
Http::setHandler() — Method in class Http
Lang::setSelector() — Method in class Lang
Lang::setLocale() — Method in class Lang
Lang::setFallback() — Method in class Lang
Lang::setLoaded() — Method in class Lang
Lang::stringable() — Method in class Lang
Lang::setParsedKey() — Method in class Lang
Log::stack() — Method in class Log
Log::shareContext() — Method in class Log
Log::sharedContext() — Method in class Log
Log::setDefaultDriver() — Method in class Log
Log::setEventDispatcher() — Method in class Log
Mail::setDefaultDriver() — Method in class Mail
Mail::setApplication() — Method in class Mail
Mail::send() — Method in class Mail
Mail::setSymfonyTransport() — Method in class Mail
Mail::setQueue() — Method in class Mail
Mail::sent() — Method in class Mail
Notification::send() — Method in class Notification
Notification::sendNow() — Method in class Notification
Notification::setContainer() — Method in class Notification
Notification::sent() — Method in class Notification
Notification::sentNotifications() — Method in class Notification
ParallelTesting::setUpProcess() — Method in class ParallelTesting
ParallelTesting::setUpTestCase() — Method in class ParallelTesting
ParallelTesting::setUpTestDatabase() — Method in class ParallelTesting
Password::setDefaultDriver() — Method in class Password
Password::sendResetLink() — Method in class Password
Pipeline::send() — Method in class Pipeline
Pipeline::setContainer() — Method in class Pipeline
Process::start() — Method in class Process
Process::sequence() — Method in class Process
Queue::stopping() — Method in class Queue
Queue::setDefaultDriver() — Method in class Queue
Queue::setApplication() — Method in class Queue
Queue::size() — Method in class Queue
Queue::setConnectionName() — Method in class Queue
Queue::setContainer() — Method in class Queue
Queue::shouldFakeJob() — Method in class Queue
Redirect::secure() — Method in class Redirect
Redirect::signedRoute() — Method in class Redirect
Redirect::setSession() — Method in class Redirect
Redirect::setIntendedUrl() — Method in class Redirect
Redis::setDriver() — Method in class Redis
Redis::subscribe() — Method in class Redis
Redis::setName() — Method in class Redis
Redis::setEventDispatcher() — Method in class Redis
Request::segment() — Method in class Request
Request::segments() — Method in class Request
Request::schemeAndHttpHost() — Method in class Request
Request::secure() — Method in class Request
Request::session() — Method in class Request
Request::setLaravelSession() — Method in class Request
Request::setRequestLocale() — Method in class Request
Request::setDefaultRequestLocale() — Method in class Request
Request::setJson() — Method in class Request
Request::setUserResolver() — Method in class Request
Request::setRouteResolver() — Method in class Request
Request::setFactory() — Method in class Request
Request::setTrustedProxies() — Method in class Request
Request::setTrustedHosts() — Method in class Request
Request::setSession() — Method in class Request
Request::setMethod() — Method in class Request
Request::setFormat() — Method in class Request
Request::setRequestFormat() — Method in class Request
Request::setDefaultLocale() — Method in class Request
Request::setLocale() — Method in class Request
Request::server() — Method in class Request
Request::str() — Method in class Request
Request::string() — Method in class Request
Response::stream() — Method in class Response
Response::streamDownload() — Method in class Response
Route::singletons() — Method in class Route
Route::singleton() — Method in class Route
Route::substituteBindings() — Method in class Route
Route::substituteImplicitBindings() — Method in class Route
Route::singularResourceParameters() — Method in class Route
Route::setRoutes() — Method in class Route
Route::setCompiledRoutes() — Method in class Route
Route::setContainer() — Method in class Route
Route::scopeBindings() — Method in class Route
SchemaClass in namespace Illuminate\Support\Facades
Schema::setConnection() — Method in class Schema
SessionClass in namespace Illuminate\Support\Facades
Session::shouldBlock() — Method in class Session
Session::setDefaultDriver() — Method in class Session
Session::setContainer() — Method in class Session
Session::start() — Method in class Session
Session::save() — Method in class Session
Session::setName() — Method in class Session
Session::setId() — Method in class Session
Session::setExists() — Method in class Session
Session::setPreviousUrl() — Method in class Session
Session::setHandler() — Method in class Session
Session::setRequestOnHandler() — Method in class Session
StorageClass in namespace Illuminate\Support\Facades
Storage::set() — Method in class Storage
Storage::setApplication() — Method in class Storage
Storage::setVisibility() — Method in class Storage
Storage::size() — Method in class Storage
URL::secure() — Method in class URL
URL::secureAsset() — Method in class URL
URL::signedRoute() — Method in class URL
URL::signatureHasNotExpired() — Method in class URL
URL::setRequest() — Method in class URL
URL::setRoutes() — Method in class URL
URL::setSessionResolver() — Method in class URL
URL::setKeyResolver() — Method in class URL
URL::setRootControllerNamespace() — Method in class URL
Validator::setPresenceVerifier() — Method in class Validator
Validator::setContainer() — Method in class Validator
View::share() — Method in class View
View::setFinder() — Method in class View
View::setDispatcher() — Method in class View
View::setContainer() — Method in class View
View::shared() — Method in class View
View::startComponent() — Method in class View
View::startComponentFirst() — Method in class View
View::slot() — Method in class View
View::startFragment() — Method in class View
View::stopFragment() — Method in class View
View::startSection() — Method in class View
View::stopSection() — Method in class View
View::sectionMissing() — Method in class View
View::startPush() — Method in class View
View::stopPush() — Method in class View
View::startPrepend() — Method in class View
View::stopPrepend() — Method in class View
View::startTranslation() — Method in class View
InteractsWithTime::secondsUntil() — Method in class InteractsWithTime

Get the number of seconds until the given DateTime.

$ LazyCollection#sourceProperty in class LazyCollection
LazyCollection::search() — Method in class LazyCollection

Search the collection for a given value and return the corresponding key if successful.

LazyCollection::shuffle() — Method in class LazyCollection

Shuffle the items in the collection.

LazyCollection::sliding() — Method in class LazyCollection
LazyCollection::skip() — Method in class LazyCollection

Skip the first {$count} items.

LazyCollection::skipUntil() — Method in class LazyCollection

Skip items in the collection until the given condition is met.

LazyCollection::skipWhile() — Method in class LazyCollection

Skip items in the collection while the given condition is met.

LazyCollection::slice() — Method in class LazyCollection

Get a slice of items from the enumerable.

LazyCollection::split() — Method in class LazyCollection
LazyCollection::sole() — Method in class LazyCollection

Get the first item in the collection, but only if exactly one item exists. Otherwise, throw an exception.

LazyCollection::splitIn() — Method in class LazyCollection
LazyCollection::sort() — Method in class LazyCollection

Sort through each item with a callback.

LazyCollection::sortDesc() — Method in class LazyCollection

Sort items in descending order.

LazyCollection::sortBy() — Method in class LazyCollection

Sort the collection using the given callback.

LazyCollection::sortByDesc() — Method in class LazyCollection

Sort the collection in descending order using the given callback.

LazyCollection::sortKeys() — Method in class LazyCollection

Sort the collection keys.

LazyCollection::sortKeysDesc() — Method in class LazyCollection

Sort the collection keys in descending order.

LazyCollection::sortKeysUsing() — Method in class LazyCollection

Sort the collection keys using a callback.

Lottery::setResultFactory() — Method in class Lottery

Set the factory that should be used to determine the lottery results.

Manager::setContainer() — Method in class Manager

Set the container instance used by the manager.

MessageBag::setFormat() — Method in class MessageBag

Set the default message format.

MultipleInstanceManager::setDefaultInstance() — Method in class MultipleInstanceManager

Set the default instance name.

NamespacedItemResolver::setParsedKey() — Method in class NamespacedItemResolver

Set the parsed value of a key.

Pluralizer::singular() — Method in class Pluralizer

Get the singular form of an English word.

ServiceProviderClass in namespace Illuminate\Support
StrClass in namespace Illuminate\Support
$ Str#snakeCacheProperty in class Str

The cache of snake-cased words.

$ Str#studlyCacheProperty in class Str

The cache of studly-cased words.

Str::start() — Method in class Str

Begin a string with a single instance of a given value.

Str::singular() — Method in class Str

Get the singular form of an English word.

Str::slug() — Method in class Str

Generate a URL friendly "slug" from a given string.

Str::snake() — Method in class Str

Convert a string to snake case.

Str::squish() — Method in class Str

Remove all "extra" blank space from the given string.

Str::startsWith() — Method in class Str

Determine if a given string starts with a given substring.

Str::studly() — Method in class Str

Convert a value to studly caps case.

Str::substr() — Method in class Str

Returns the portion of the string specified by the start and length parameters.

Str::substrCount() — Method in class Str

Returns the number of substring occurrences.

Str::substrReplace() — Method in class Str

Replace text within a portion of a string.

Str::swap() — Method in class Str

Swap multiple keywords in a string with other keywords.

StringableClass in namespace Illuminate\Support
Stringable::split() — Method in class Stringable

Split a string using a regular expression or by length.

Stringable::scan() — Method in class Stringable

Parse input from a string to a collection, according to a format.

Stringable::squish() — Method in class Stringable

Remove all "extra" blank space from the given string.

Stringable::start() — Method in class Stringable

Begin a string with a single instance of a given value.

Stringable::stripTags() — Method in class Stringable

Strip HTML and PHP tags from the given string.

Stringable::singular() — Method in class Stringable

Get the singular form of an English word.

Stringable::slug() — Method in class Stringable

Generate a URL friendly "slug" from a given string.

Stringable::snake() — Method in class Stringable

Convert a string to snake case.

Stringable::startsWith() — Method in class Stringable

Determine if a given string starts with a given substring.

Stringable::studly() — Method in class Stringable

Convert a value to studly caps case.

Stringable::substr() — Method in class Stringable

Returns the portion of the string specified by the start and length parameters.

Stringable::substrCount() — Method in class Stringable

Returns the number of substring occurrences.

Stringable::substrReplace() — Method in class Stringable

Replace text within a portion of a string.

Stringable::swap() — Method in class Stringable

Swap multiple keywords in a string with other keywords.

BatchRepositoryFake::store() — Method in class BatchRepositoryFake

Store a new pending batch.

BusFake::shouldFakeJob() — Method in class BusFake

Determine if a command should be faked or actually dispatched.

BusFake::shouldDispatchCommand() — Method in class BusFake

Determine if a command should be dispatched or not.

EventFake::subscribe() — Method in class EventFake

Register an event subscriber with the dispatcher.

EventFake::shouldFakeEvent() — Method in class EventFake

Determine if an event should be faked or actually dispatched.

EventFake::shouldDispatchEvent() — Method in class EventFake

Determine whether an event should be dispatched or not.

MailFake::sent() — Method in class MailFake

Get all of the mailables matching a truth-test callback.

MailFake::send() — Method in class MailFake

Send a new message using a view.

NotificationFake::sent() — Method in class NotificationFake

Get all of the notifications matching a truth-test callback.

NotificationFake::send() — Method in class NotificationFake

Send the given notification to the given notifiable entities.

NotificationFake::sendNow() — Method in class NotificationFake

Send the given notification immediately.

NotificationFake::sentNotifications() — Method in class NotificationFake

Get the notifications that have been sent.

PendingMailFake::send() — Method in class PendingMailFake

Send a new mailable message instance.

QueueFake::size() — Method in class QueueFake

Get the size of the queue.

QueueFake::shouldFakeJob() — Method in class QueueFake

Determine if a job should be faked or actually dispatched.

QueueFake::shouldDispatchJob() — Method in class QueueFake

Determine if a job should be pushed to the queue instead of faked.

QueueFake::setConnectionName() — Method in class QueueFake

Set the connection name for the queue.

CapsuleManagerTrait::setupContainer() — Method in class CapsuleManagerTrait

Setup the IoC container instance.

CapsuleManagerTrait::setAsGlobal() — Method in class CapsuleManagerTrait

Make this capsule instance available globally.

CapsuleManagerTrait::setContainer() — Method in class CapsuleManagerTrait

Set the IoC container instance.

$ EnumeratesValues#skipUntilProperty in class EnumeratesValues
$ EnumeratesValues#skipWhileProperty in class EnumeratesValues
$ EnumeratesValues#someProperty in class EnumeratesValues
$ EnumeratesValues#sortByProperty in class EnumeratesValues
$ EnumeratesValues#sortByDescProperty in class EnumeratesValues
$ EnumeratesValues#sumProperty in class EnumeratesValues
EnumeratesValues::some() — Method in class EnumeratesValues

Alias for the "contains" method.

EnumeratesValues::sum() — Method in class EnumeratesValues

Get the sum of the given values.

$ TestDatabases#schemaIsUpToDateProperty in class TestDatabases

Indicates if the test database schema is up to date.

TestDatabases::switchToDatabase() — Method in class TestDatabases

Switch to the given database.

$ HasInDatabase#showProperty in class HasInDatabase

Number of records that will be shown in the console in case of failure.

$ NotSoftDeletedInDatabase#showProperty in class NotSoftDeletedInDatabase

Number of records that will be shown in the console in case of failure.

SeeInOrderClass in namespace Illuminate\Testing\Constraints
SoftDeletedInDatabaseClass in namespace Illuminate\Testing\Constraints
$ SoftDeletedInDatabase#showProperty in class SoftDeletedInDatabase

Number of records that will be shown in the console in case of failure.

AssertableJson::scope() — Method in class AssertableJson

Instantiate a new "scope" at the path of the given key.

Has::scope() — Method in class Has

Instantiate a new "scope" at the path of the given key.

$ ParallelTesting#setUpProcessCallbacksProperty in class ParallelTesting

All of the registered "setUp" process callbacks.

$ ParallelTesting#setUpTestCaseCallbacksProperty in class ParallelTesting

All of the registered "setUp" test case callbacks.

$ ParallelTesting#setUpTestDatabaseCallbacksProperty in class ParallelTesting

All of the registered "setUp" test database callbacks.

ParallelTesting::setUpProcess() — Method in class ParallelTesting

Register a "setUp" process callback.

ParallelTesting::setUpTestCase() — Method in class ParallelTesting

Register a "setUp" test case callback.

ParallelTesting::setUpTestDatabase() — Method in class ParallelTesting

Register a "setUp" test database callback.

$ TestResponse#streamedContentProperty in class TestResponse

The streamed content of the response.

TestResponse::statusMessageWithDetails() — Method in class TestResponse

Get an assertion message for a status assertion containing extra details when available.

TestResponse::session() — Method in class TestResponse

Get the current session store.

TestResponse::streamedContent() — Method in class TestResponse

Get the streamed content from the response.

$ PotentiallyTranslatedString#stringProperty in class PotentiallyTranslatedString

The string that may be translated.

$ Translator#selectorProperty in class Translator

The message selector.

$ Translator#stringableHandlersProperty in class Translator

The custom rendering callbacks for stringable objects.

Translator::setSelector() — Method in class Translator

Set the message selector instance.

Translator::setLocale() — Method in class Translator

Set the default locale.

Translator::setFallback() — Method in class Translator

Set the fallback locale being used.

Translator::setLoaded() — Method in class Translator

Set the loaded translation groups.

Translator::stringable() — Method in class Translator

Add a handler to be executed in order to format a given class to a string during translation replacements.

ClosureValidationRule::setValidator() — Method in class ClosureValidationRule

Set the current validator.

ValidatesAttributes::shouldBlockPhpUpload() — Method in class ValidatesAttributes

Check if PHP uploads are explicitly allowed.

ValidatesAttributes::shouldConvertToBoolean() — Method in class ValidatesAttributes

Check if parameter should be converted to boolean.

ValidatesAttributes::shouldBeNumeric() — Method in class ValidatesAttributes

Adds the existing rule to the numericRules array if the attribute's value is numeric.

DatabasePresenceVerifier::setConnection() — Method in class DatabasePresenceVerifier

Set the connection to be used.

DatabasePresenceVerifierInterface::setConnection() — Method in class DatabasePresenceVerifierInterface

Set the connection to be used.

Factory::setPresenceVerifier() — Method in class Factory

Set the Presence Verifier implementation.

Factory::setContainer() — Method in class Factory

Set the container instance used by the validation factory.

NotPwnedVerifier::search() — Method in class NotPwnedVerifier

Search by the given hash prefix and returns all occurrences of leaked passwords.

File::size() — Method in class File

Indicate that the uploaded file should be exactly a certain size in kilobytes.

File::setValidator() — Method in class File

Set the current validator.

File::setData() — Method in class File

Set the current data under validation.

$ Password#symbolsProperty in class Password

If the password requires at least one symbol.

Password::sometimes() — Method in class Password

Get the default configuration of the password rule and mark the field as sometimes being required.

Password::setValidator() — Method in class Password

Set the performing validator.

Password::setData() — Method in class Password

Set the data under validation.

Password::symbols() — Method in class Password

Makes the password require at least one symbol.

$ ValidationException#statusProperty in class ValidationException

The status code to use for the response.

ValidationException::summarize() — Method in class ValidationException

Create an error message summary from the validation errors.

ValidationException::status() — Method in class ValidationException

Set the HTTP status code to be used for the response.

$ Validator#stopOnFirstFailureProperty in class Validator

Indicates if the validator should stop on the first rule failure.

$ Validator#sizeRulesProperty in class Validator

The size related validation rules.

Validator::shouldBeExcluded() — Method in class Validator

Determine if the attribute should be excluded.

Validator::safe() — Method in class Validator

Get a validated input container for the validated input.

Validator::shouldStopValidating() — Method in class Validator

Check if we should stop further validations on a given attribute.

Validator::setData() — Method in class Validator

Set the data under validation.

Validator::setRules() — Method in class Validator

Set the validation rules.

Validator::sometimes() — Method in class Validator

Add conditions to a given field based on a Closure.

Validator::stopOnFirstFailure() — Method in class Validator

Instruct the validator to stop validating after the first rule failure.

Validator::setCustomMessages() — Method in class Validator

Set the custom messages for the validator.

Validator::setAttributeNames() — Method in class Validator

Set the custom attributes on the validator.

Validator::setImplicitAttributesFormatter() — Method in class Validator

Set the callback that used to format an implicit attribute.

Validator::setValueNames() — Method in class Validator

Set the custom values on the validator.

Validator::setFallbackMessages() — Method in class Validator

Set the fallback messages for the validator.

Validator::setPresenceVerifier() — Method in class Validator

Set the Presence Verifier implementation.

Validator::setException() — Method in class Validator

Set the exception to throw upon failed validation.

Validator::setTranslator() — Method in class Validator

Set the Translator implementation.

Validator::setContainer() — Method in class Validator

Set the IoC container instance.

BladeCompiler::setPath() — Method in class BladeCompiler

Set the path currently being compiled.

$ Compiler#shouldCacheProperty in class Compiler

Determines if compiled views should be cached.

ComponentTagCompiler::stripQuotes() — Method in class ComponentTagCompiler

Strip any quotes from the given string.

CompilesComponents::sanitizeComponentAttribute() — Method in class CompilesComponents

Sanitize the given component attribute value.

CompilesEchos::stringable() — Method in class CompilesEchos

Add a handler to be executed before echoing a given class.

Component::shouldIgnore() — Method in class Component

Determine if the given property / method should be ignored.

Component::shouldRender() — Method in class Component

Determine if the component should be rendered.

ComponentAttributeBag::style() — Method in class ComponentAttributeBag

Conditionally merge styles into the attribute bag.

ComponentAttributeBag::shouldEscapeAttributeValue() — Method in class ComponentAttributeBag

Determine if the specific attribute value should be escaped.

ComponentAttributeBag::setAttributes() — Method in class ComponentAttributeBag

Set the underlying attributes.

$ ManagesComponents#slotsProperty in class ManagesComponents

The slot contents for the component.

$ ManagesComponents#slotStackProperty in class ManagesComponents

The names of the slots being rendered.

ManagesComponents::startComponent() — Method in class ManagesComponents

Start a component rendering process.

ManagesComponents::startComponentFirst() — Method in class ManagesComponents

Get the first view that actually exists from the given list, and start a component.

ManagesComponents::slot() — Method in class ManagesComponents

Start the slot rendering process.

ManagesFragments::startFragment() — Method in class ManagesFragments

Start injecting content into a fragment.

ManagesFragments::stopFragment() — Method in class ManagesFragments

Stop injecting content into a fragment.

$ ManagesLayouts#sectionsProperty in class ManagesLayouts

All of the finished, captured sections.

$ ManagesLayouts#sectionStackProperty in class ManagesLayouts

The stack of in-progress sections.

ManagesLayouts::startSection() — Method in class ManagesLayouts

Start injecting content into a section.

ManagesLayouts::stopSection() — Method in class ManagesLayouts

Stop injecting content into a section.

ManagesLayouts::sectionMissing() — Method in class ManagesLayouts

Check if section does not exist.

ManagesStacks::startPush() — Method in class ManagesStacks

Start injecting content into a push section.

ManagesStacks::stopPush() — Method in class ManagesStacks

Stop injecting content into a push section.

ManagesStacks::startPrepend() — Method in class ManagesStacks

Start prepending content into a push section.

ManagesStacks::stopPrepend() — Method in class ManagesStacks

Stop prepending content into a push section.

ManagesTranslations::startTranslation() — Method in class ManagesTranslations

Start a translation block.

$ Factory#sharedProperty in class Factory

Data that should be available to all templates.

Factory::share() — Method in class Factory

Add a piece of shared data to the environment.

Factory::setFinder() — Method in class Factory

Set the view finder instance.

Factory::setDispatcher() — Method in class Factory

Set the event dispatcher instance.

Factory::setContainer() — Method in class Factory

Set the IoC container instance.

Factory::shared() — Method in class Factory

Get an item from the shared data.

FileViewFinder::setPaths() — Method in class FileViewFinder

Set the active view paths.

ShareErrorsFromSessionClass in namespace Illuminate\View\Middleware
View::setPath() — Method in class View

Set the path to the view.

T

AuthorizationException::toResponse() — Method in class AuthorizationException

Create a deny response object from this exception.

Response::toArray() — Method in class Response

Convert the response to an array.

$ DatabaseUserProvider#tableProperty in class DatabaseUserProvider

The table containing the users.

$ ResetPassword#tokenProperty in class ResetPassword

The password reset token.

$ ResetPassword#toMailCallbackProperty in class ResetPassword

The callback that should be used to build the mail message.

ResetPassword::toMail() — Method in class ResetPassword

Build the mail representation of the notification.

ResetPassword::toMailUsing() — Method in class ResetPassword

Set a callback that should be used when building the notification mail message.

$ VerifyEmail#toMailCallbackProperty in class VerifyEmail

The callback that should be used to build the mail message.

VerifyEmail::toMail() — Method in class VerifyEmail

Build the mail representation of the notification.

VerifyEmail::toMailUsing() — Method in class VerifyEmail

Set a callback that should be used when building the notification mail message.

$ DatabaseTokenRepository#tableProperty in class DatabaseTokenRepository

The token database table.

$ DatabaseTokenRepository#throttleProperty in class DatabaseTokenRepository

Minimum number of seconds before re-redefining the token.

DatabaseTokenRepository::tokenExpired() — Method in class DatabaseTokenRepository

Determine if the token has expired.

DatabaseTokenRepository::tokenRecentlyCreated() — Method in class DatabaseTokenRepository

Determine if the token was recently created.

$ PasswordBroker#tokensProperty in class PasswordBroker

The password token repository.

PasswordBroker::tokenExists() — Method in class PasswordBroker

Validate the given password reset token.

TokenRepositoryInterfaceClass in namespace Illuminate\Auth\Passwords
Recaller::token() — Method in class Recaller

Get the "remember token" token from the recaller.

$ SessionGuard#timeboxProperty in class SessionGuard

The timebox instance.

TokenGuardClass in namespace Illuminate\Auth
$ BroadcastEvent#triesProperty in class BroadcastEvent

The number of times the job may be attempted.

$ BroadcastEvent#timeoutProperty in class BroadcastEvent

The number of seconds the job can run before timing out.

PendingBroadcast::toOthers() — Method in class PendingBroadcast

Broadcast the event to everyone except the current user.

$ Batch#totalJobsProperty in class Batch

The total number of jobs that belong to the batch.

Batch::toArray() — Method in class Batch

Convert the batch to an array.

BatchRepository::transaction() — Method in class BatchRepository

Execute the given Closure within a storage specific transaction.

$ DatabaseBatchRepository#tableProperty in class DatabaseBatchRepository

The database table to use to store batch information.

DatabaseBatchRepository::transaction() — Method in class DatabaseBatchRepository

Execute the given Closure within a storage specific transaction.

DatabaseBatchRepository::toBatch() — Method in class DatabaseBatchRepository

Convert the given raw batch to a Batch object.

PendingBatch::then() — Method in class PendingBatch

Add a callback to be executed after all jobs in the batch have executed successfully.

PendingBatch::thenCallbacks() — Method in class PendingBatch

Get the "then" callbacks that have been registered with the pending batch.

Queueable::through() — Method in class Queueable

Specify the middleware the job should be dispatched through.

ArrayStore::toTimestamp() — Method in class ArrayStore

Get the UNIX timestamp for the given number of seconds.

ClearCommand::tags() — Method in class ClearCommand

Get the tags passed to the command.

$ DatabaseLock#tableProperty in class DatabaseLock

The database table name.

$ DatabaseStore#tableProperty in class DatabaseStore

The name of the cache table.

DatabaseStore::table() — Method in class DatabaseStore

Get a query builder for the cache table.

$ DynamoDbStore#tableProperty in class DynamoDbStore

The table name.

DynamoDbStore::toTimestamp() — Method in class DynamoDbStore

Get the UNIX timestamp for the given number of seconds.

DynamoDbStore::type() — Method in class DynamoDbStore

Get the DynamoDB type for the given value.

$ CacheEvent#tagsProperty in class CacheEvent

The tags that were assigned to the key.

MemcachedStore::toTimestamp() — Method in class MemcachedStore

Get the UNIX timestamp for the given number of seconds.

RateLimiter::tooManyAttempts() — Method in class RateLimiter

Determine if the given key has been "accessed" too many times.

RedisStore::tags() — Method in class RedisStore

Begin executing a new tags operation.

RedisTagSet::tagId() — Method in class RedisTagSet

Get the unique tag identifier for a given tag.

RedisTagSet::tagKey() — Method in class RedisTagSet

Get the tag identifier key for a given tag.

Repository::tags() — Method in class Repository

Begin executing a new tags operation if the store supports it.

TagSetClass in namespace Illuminate\Cache
TagSet::tagIds() — Method in class TagSet

Get an array of tag identifiers for all of the tags in the set.

TagSet::tagId() — Method in class TagSet

Get the unique tag identifier for a given tag.

TagSet::tagKey() — Method in class TagSet

Get the tag identifier key for a given tag.

TaggableStoreClass in namespace Illuminate\Cache
TaggableStore::tags() — Method in class TaggableStore

Begin executing a new tags operation.

TaggedCacheClass in namespace Illuminate\Cache
$ TaggedCache#tagsProperty in class TaggedCache

The tag set instance.

TaggedCache::taggedItemKey() — Method in class TaggedCache

Get a fully qualified key for a tagged item.

InteractsWithIO::table() — Method in class InteractsWithIO

Format input to textual table.

InteractsWithSignals::trap() — Method in class InteractsWithSignals

Define a callback to be run when the given signal(s) occurs.

$ ScheduledBackgroundTaskFinished#taskProperty in class ScheduledBackgroundTaskFinished

The scheduled event that ran.

$ ScheduledTaskFailed#taskProperty in class ScheduledTaskFailed

The scheduled event that failed.

$ ScheduledTaskFinished#taskProperty in class ScheduledTaskFinished

The scheduled event that ran.

$ ScheduledTaskSkipped#taskProperty in class ScheduledTaskSkipped

The scheduled event being run.

$ ScheduledTaskStarting#taskProperty in class ScheduledTaskStarting

The scheduled event being run.

$ GeneratorCommand#typeProperty in class GeneratorCommand

The type of class being generated.

$ Event#timezoneProperty in class Event

The timezone the date should be evaluated on.

Event::thenPing() — Method in class Event

Register a callback to ping a given URL after the job runs.

Event::thenPingIf() — Method in class Event

Register a callback to ping a given URL after the job runs if the given condition is true.

Event::then() — Method in class Event

Register a callback to be called after the operation.

Event::thenWithOutput() — Method in class Event

Register a callback that uses the output after the job runs.

ManagesFrequencies::twiceDaily() — Method in class ManagesFrequencies

Schedule the event to run twice daily.

ManagesFrequencies::twiceDailyAt() — Method in class ManagesFrequencies

Schedule the event to run twice daily at a given offset.

ManagesFrequencies::tuesdays() — Method in class ManagesFrequencies

Schedule the event to run only on Tuesdays.

ManagesFrequencies::thursdays() — Method in class ManagesFrequencies

Schedule the event to run only on Thursdays.

ManagesFrequencies::twiceMonthly() — Method in class ManagesFrequencies

Schedule the event to run twice monthly at a given time.

ManagesFrequencies::timezone() — Method in class ManagesFrequencies

Set the timezone the date should be evaluated on.

$ Schedule#timezoneProperty in class Schedule

The timezone the date should be evaluated on.

$ ScheduleListCommand#terminalWidthResolverProperty in class ScheduleListCommand

The terminal width resolver callback.

Factory::task() — Method in class Factory
Factory::twoColumnDetail() — Method in class Factory
TaskClass in namespace Illuminate\Console\View\Components
TwoColumnDetailClass in namespace Illuminate\Console\View\Components
$ Container#tagsProperty in class Container

All of the registered tags.

Container::tag() — Method in class Container

Assign a set of tags to a given binding.

Container::tagged() — Method in class Container

Resolve all of the bindings for a given tag.

Kernel::terminate() — Method in class Kernel

Terminate the application.

Container::tag() — Method in class Container

Assign a set of tags to a given binding.

Container::tagged() — Method in class Container

Resolve all of the bindings for a given tag.

Application::terminating() — Method in class Application

Register a terminating callback with the application.

Application::terminate() — Method in class Application

Terminate the application.

Kernel::terminate() — Method in class Kernel

Perform any final actions for the request lifecycle.

Attachable::toMailAttachment() — Method in class Attachable

Get an attachment instance for this entity.

Mailable::to() — Method in class Mailable

Set the recipients of the message.

Mailer::to() — Method in class Mailer

Begin the process of mailing a mailable class instance.

LengthAwarePaginator::total() — Method in class LengthAwarePaginator

Determine the total number of items in the data store.

Pipeline::through() — Method in class Pipeline

Set the stops of the pipeline.

Pipeline::then() — Method in class Pipeline

Run the pipeline with a final destination callback.

ProcessResult::throw() — Method in class ProcessResult

Throw an exception if the process failed.

ProcessResult::throwIf() — Method in class ProcessResult

Throw an exception if the process failed and the given condition is true.

Job::timeout() — Method in class Job

Get the number of seconds the job can run.

UrlGenerator::to() — Method in class UrlGenerator

Generate an absolute URL to the given path.

Session::token() — Method in class Session

Get the CSRF token value.

Arrayable::toArray() — Method in class Arrayable
Htmlable::toHtml() — Method in class Htmlable

Get content as a string of HTML.

Jsonable::toJson() — Method in class Jsonable

Convert the object to its JSON representation.

Responsable::toResponse() — Method in class Responsable

Create an HTTP response that represents the object.

TranslatorClass in namespace Illuminate\Contracts\Translation
Manager::table() — Method in class Manager

Get a fluent query builder instance.

BuildsQueries::tap() — Method in class BuildsQueries

Pass the query to a given callback.

ManagesTransactions::transaction() — Method in class ManagesTransactions

Execute a Closure within a transaction.

ManagesTransactions::transactionLevel() — Method in class ManagesTransactions

Get the number of active transactions.

$ Connection#tablePrefixProperty in class Connection

The table prefix for the connection.

$ Connection#transactionsProperty in class Connection

The number of active transactions.

$ Connection#transactionsManagerProperty in class Connection

The transaction manager instance.

$ Connection#totalQueryDurationProperty in class Connection

The duration of all executed queries in milliseconds.

Connection::table() — Method in class Connection

Begin a fluent query against a database table.

Connection::totalQueryDuration() — Method in class Connection

Get the duration of all run queries in milliseconds.

Connection::tryAgainIfCausedByLostConnection() — Method in class Connection

Handle a query exception that occurred during query execution.

ConnectionInterface::table() — Method in class ConnectionInterface

Begin a fluent query against a database table.

ConnectionInterface::transaction() — Method in class ConnectionInterface

Execute a Closure within a transaction.

ConnectionInterface::transactionLevel() — Method in class ConnectionInterface

Get the number of active transactions.

Connector::tryAgainIfCausedByLostConnection() — Method in class Connector

Handle an exception that occurred during connect execution.

$ DatabaseInspectionCommand#typeMappingsProperty in class DatabaseInspectionCommand

A map of database column types.

$ FactoryMakeCommand#typeProperty in class FactoryMakeCommand

The type of class being generated.

TableGuesserClass in namespace Illuminate\Database\Console\Migrations
$ SeederMakeCommand#typeProperty in class SeederMakeCommand

The type of class being generated.

ShowCommand::tables() — Method in class ShowCommand

Get information regarding the tables within the database.

TableCommandClass in namespace Illuminate\Database\Console
TimestampTypeClass in namespace Illuminate\Database\DBAL
$ DatabaseTransactionsManager#transactionsProperty in class DatabaseTransactionsManager

All of the recorded transactions.

Builder::touch() — Method in class Builder

Update the column's update timestamp.

Builder::toBase() — Method in class Builder

Get a base query builder instance.

ArrayObject::toArray() — Method in class ArrayObject

Get the instance as an array.

Collection::toQuery() — Method in class Collection

Get the Eloquent query builder from the collection.

GuardsAttributes::totallyGuarded() — Method in class GuardsAttributes

Determine if the model is totally guarded.

HasAttributes::throwMissingAttributeExceptionIfApplicable() — Method in class HasAttributes

Either throw a missing attribute exception or return null depending on Eloquent's configuration.

HasAttributes::transformModelValue() — Method in class HasAttributes

Transform a raw model value using mutators, casts, etc.

$ HasRelationships#touchesProperty in class HasRelationships

The relationships that should be touched on save.

HasRelationships::through() — Method in class HasRelationships

Create a pending has-many-through or has-one-through relationship.

HasRelationships::touches() — Method in class HasRelationships

Determine if the model touches a given relation.

HasRelationships::touchOwners() — Method in class HasRelationships

Touch the owning relations of the model.

$ HasTimestamps#timestampsProperty in class HasTimestamps

Indicates if the model should be timestamped.

HasTimestamps::touch() — Method in class HasTimestamps

Update the model's update timestamp.

HasTimestamps::touchQuietly() — Method in class HasTimestamps

Update the model's update timestamp without raising any events.

Factory::times() — Method in class Factory

Get a new factory instance for the given number of models.

Factory::trashed() — Method in class Factory
$ Model#tableProperty in class Model

The table associated with the model.

$ Model#traitInitializersProperty in class Model

The array of trait initializers that will be called on each new instance.

Model::toArray() — Method in class Model

Convert the model instance to an array.

Model::toJson() — Method in class Model

Convert the model instance to JSON.

$ BelongsToMany#tableProperty in class BelongsToMany

The intermediate table for the relation.

BelongsToMany::touchIfTouching() — Method in class BelongsToMany

If we're touching the parent model, touch.

BelongsToMany::touchingParent() — Method in class BelongsToMany

Determine if we should touch the parent on sync.

BelongsToMany::touch() — Method in class BelongsToMany

Touch all of the related models for the relationship.

InteractsWithPivotTable::toggle() — Method in class InteractsWithPivotTable

Toggles a model (or models) from the parent.

$ HasManyThrough#throughParentProperty in class HasManyThrough

The "through" parent model instance.

HasManyThrough::throughParentSoftDeletes() — Method in class HasManyThrough

Determine whether "through" parent of the relation uses Soft Deletes.

MorphTo::touch() — Method in class MorphTo

Touch all of the related models for the relationship.

Relation::touch() — Method in class Relation

Touch all of the related models for the relationship.

Relation::toBase() — Method in class Relation

Get a base query builder instance.

SoftDeletes::trashed() — Method in class SoftDeletes

Determine if the model instance has been soft-deleted.

$ QueryExecuted#timeProperty in class QueryExecuted

The number of milliseconds it took to execute the query.

TransactionBeginningClass in namespace Illuminate\Database\Events
TransactionCommittedClass in namespace Illuminate\Database\Events
TransactionCommittingClass in namespace Illuminate\Database\Events
TransactionRolledBackClass in namespace Illuminate\Database\Events
$ Grammar#tablePrefixProperty in class Grammar

The grammar table prefix.

$ DatabaseMigrationRepository#tableProperty in class DatabaseMigrationRepository

The name of the migration table.

DatabaseMigrationRepository::table() — Method in class DatabaseMigrationRepository

Get a query builder for the migration table.

Builder::take() — Method in class Builder

Alias to set the "limit" value of the query.

Builder::toSql() — Method in class Builder

Get the SQL representation of the query.

Builder::truncate() — Method in class Builder

Run a truncate statement on the table.

$ IndexHint#typeProperty in class IndexHint

The type of query hint.

$ JoinClause#typeProperty in class JoinClause

The type of join being performed.

$ JoinClause#tableProperty in class JoinClause

The table the join clause is joining to.

$ Blueprint#tableProperty in class Blueprint

The table the blueprint describes.

$ Blueprint#temporaryProperty in class Blueprint

Whether to make the table temporary.

Blueprint::toSql() — Method in class Blueprint

Get the raw SQL statements for the blueprint.

Blueprint::temporary() — Method in class Blueprint

Indicate that the table needs to be temporary.

Blueprint::tinyIncrements() — Method in class Blueprint

Create a new auto-incrementing tiny integer (1-byte) column on the table.

Blueprint::tinyText() — Method in class Blueprint

Create a new tiny text column on the table.

Blueprint::text() — Method in class Blueprint

Create a new text column on the table.

Blueprint::tinyInteger() — Method in class Blueprint

Create a new tiny integer (1-byte) column on the table.

Blueprint::time() — Method in class Blueprint

Create a new time column on the table.

Blueprint::timeTz() — Method in class Blueprint

Create a new time column (with time zone) on the table.

Blueprint::timestamp() — Method in class Blueprint

Create a new timestamp column on the table.

Blueprint::timestampTz() — Method in class Blueprint

Create a new timestamp (with time zone) column on the table.

Blueprint::timestamps() — Method in class Blueprint

Add nullable creation and update timestamps to the table.

Blueprint::timestampsTz() — Method in class Blueprint

Add creation and update timestampTz columns to the table.

Builder::table() — Method in class Builder

Modify a table on the schema.

ColumnDefinition::type() — Method in class ColumnDefinition

Specify a type for the column

$ Grammar#transactionsProperty in class Grammar

If this Grammar supports schema changes wrapped in a transaction.

Grammar::typeComputed() — Method in class Grammar

Create the column definition for a generated, computed column type.

MySqlGrammar::typeChar() — Method in class MySqlGrammar

Create the column definition for a char type.

MySqlGrammar::typeString() — Method in class MySqlGrammar

Create the column definition for a string type.

MySqlGrammar::typeTinyText() — Method in class MySqlGrammar

Create the column definition for a tiny text type.

MySqlGrammar::typeText() — Method in class MySqlGrammar

Create the column definition for a text type.

MySqlGrammar::typeMediumText() — Method in class MySqlGrammar

Create the column definition for a medium text type.

MySqlGrammar::typeLongText() — Method in class MySqlGrammar

Create the column definition for a long text type.

MySqlGrammar::typeBigInteger() — Method in class MySqlGrammar

Create the column definition for a big integer type.

MySqlGrammar::typeInteger() — Method in class MySqlGrammar

Create the column definition for an integer type.

MySqlGrammar::typeMediumInteger() — Method in class MySqlGrammar

Create the column definition for a medium integer type.

MySqlGrammar::typeTinyInteger() — Method in class MySqlGrammar

Create the column definition for a tiny integer type.

MySqlGrammar::typeSmallInteger() — Method in class MySqlGrammar

Create the column definition for a small integer type.

MySqlGrammar::typeFloat() — Method in class MySqlGrammar

Create the column definition for a float type.

MySqlGrammar::typeDouble() — Method in class MySqlGrammar

Create the column definition for a double type.

MySqlGrammar::typeDecimal() — Method in class MySqlGrammar

Create the column definition for a decimal type.

MySqlGrammar::typeBoolean() — Method in class MySqlGrammar

Create the column definition for a boolean type.

MySqlGrammar::typeEnum() — Method in class MySqlGrammar

Create the column definition for an enumeration type.

MySqlGrammar::typeSet() — Method in class MySqlGrammar

Create the column definition for a set enumeration type.

MySqlGrammar::typeJson() — Method in class MySqlGrammar

Create the column definition for a json type.

MySqlGrammar::typeJsonb() — Method in class MySqlGrammar

Create the column definition for a jsonb type.

MySqlGrammar::typeDate() — Method in class MySqlGrammar

Create the column definition for a date type.

MySqlGrammar::typeDateTime() — Method in class MySqlGrammar

Create the column definition for a date-time type.

MySqlGrammar::typeDateTimeTz() — Method in class MySqlGrammar

Create the column definition for a date-time (with time zone) type.

MySqlGrammar::typeTime() — Method in class MySqlGrammar

Create the column definition for a time type.

MySqlGrammar::typeTimeTz() — Method in class MySqlGrammar

Create the column definition for a time (with time zone) type.

MySqlGrammar::typeTimestamp() — Method in class MySqlGrammar

Create the column definition for a timestamp type.

MySqlGrammar::typeTimestampTz() — Method in class MySqlGrammar

Create the column definition for a timestamp (with time zone) type.

MySqlGrammar::typeYear() — Method in class MySqlGrammar

Create the column definition for a year type.

MySqlGrammar::typeBinary() — Method in class MySqlGrammar

Create the column definition for a binary type.

MySqlGrammar::typeUuid() — Method in class MySqlGrammar

Create the column definition for a uuid type.

MySqlGrammar::typeIpAddress() — Method in class MySqlGrammar

Create the column definition for an IP address type.

MySqlGrammar::typeMacAddress() — Method in class MySqlGrammar

Create the column definition for a MAC address type.

MySqlGrammar::typeGeometry() — Method in class MySqlGrammar

Create the column definition for a spatial Geometry type.

MySqlGrammar::typePoint() — Method in class MySqlGrammar

Create the column definition for a spatial Point type.

MySqlGrammar::typeLineString() — Method in class MySqlGrammar

Create the column definition for a spatial LineString type.

MySqlGrammar::typePolygon() — Method in class MySqlGrammar

Create the column definition for a spatial Polygon type.

MySqlGrammar::typeGeometryCollection() — Method in class MySqlGrammar

Create the column definition for a spatial GeometryCollection type.

MySqlGrammar::typeMultiPoint() — Method in class MySqlGrammar

Create the column definition for a spatial MultiPoint type.

MySqlGrammar::typeMultiLineString() — Method in class MySqlGrammar

Create the column definition for a spatial MultiLineString type.

MySqlGrammar::typeMultiPolygon() — Method in class MySqlGrammar

Create the column definition for a spatial MultiPolygon type.

MySqlGrammar::typeComputed() — Method in class MySqlGrammar

Create the column definition for a generated, computed column type.

$ PostgresGrammar#transactionsProperty in class PostgresGrammar

If this Grammar supports schema changes wrapped in a transaction.

PostgresGrammar::typeChar() — Method in class PostgresGrammar

Create the column definition for a char type.

PostgresGrammar::typeString() — Method in class PostgresGrammar

Create the column definition for a string type.

PostgresGrammar::typeTinyText() — Method in class PostgresGrammar

Create the column definition for a tiny text type.

PostgresGrammar::typeText() — Method in class PostgresGrammar

Create the column definition for a text type.

PostgresGrammar::typeMediumText() — Method in class PostgresGrammar

Create the column definition for a medium text type.

PostgresGrammar::typeLongText() — Method in class PostgresGrammar

Create the column definition for a long text type.

PostgresGrammar::typeInteger() — Method in class PostgresGrammar

Create the column definition for an integer type.

PostgresGrammar::typeBigInteger() — Method in class PostgresGrammar

Create the column definition for a big integer type.

PostgresGrammar::typeMediumInteger() — Method in class PostgresGrammar

Create the column definition for a medium integer type.

PostgresGrammar::typeTinyInteger() — Method in class PostgresGrammar

Create the column definition for a tiny integer type.

PostgresGrammar::typeSmallInteger() — Method in class PostgresGrammar

Create the column definition for a small integer type.

PostgresGrammar::typeFloat() — Method in class PostgresGrammar

Create the column definition for a float type.

PostgresGrammar::typeDouble() — Method in class PostgresGrammar

Create the column definition for a double type.

PostgresGrammar::typeReal() — Method in class PostgresGrammar

Create the column definition for a real type.

PostgresGrammar::typeDecimal() — Method in class PostgresGrammar

Create the column definition for a decimal type.

PostgresGrammar::typeBoolean() — Method in class PostgresGrammar

Create the column definition for a boolean type.

PostgresGrammar::typeEnum() — Method in class PostgresGrammar

Create the column definition for an enumeration type.

PostgresGrammar::typeJson() — Method in class PostgresGrammar

Create the column definition for a json type.

PostgresGrammar::typeJsonb() — Method in class PostgresGrammar

Create the column definition for a jsonb type.

PostgresGrammar::typeDate() — Method in class PostgresGrammar

Create the column definition for a date type.

PostgresGrammar::typeDateTime() — Method in class PostgresGrammar

Create the column definition for a date-time type.

PostgresGrammar::typeDateTimeTz() — Method in class PostgresGrammar

Create the column definition for a date-time (with time zone) type.

PostgresGrammar::typeTime() — Method in class PostgresGrammar

Create the column definition for a time type.

PostgresGrammar::typeTimeTz() — Method in class PostgresGrammar

Create the column definition for a time (with time zone) type.

PostgresGrammar::typeTimestamp() — Method in class PostgresGrammar

Create the column definition for a timestamp type.

PostgresGrammar::typeTimestampTz() — Method in class PostgresGrammar

Create the column definition for a timestamp (with time zone) type.

PostgresGrammar::typeYear() — Method in class PostgresGrammar

Create the column definition for a year type.

PostgresGrammar::typeBinary() — Method in class PostgresGrammar

Create the column definition for a binary type.

PostgresGrammar::typeUuid() — Method in class PostgresGrammar

Create the column definition for a uuid type.

PostgresGrammar::typeIpAddress() — Method in class PostgresGrammar

Create the column definition for an IP address type.

PostgresGrammar::typeMacAddress() — Method in class PostgresGrammar

Create the column definition for a MAC address type.

PostgresGrammar::typeGeometry() — Method in class PostgresGrammar

Create the column definition for a spatial Geometry type.

PostgresGrammar::typePoint() — Method in class PostgresGrammar

Create the column definition for a spatial Point type.

PostgresGrammar::typeLineString() — Method in class PostgresGrammar

Create the column definition for a spatial LineString type.

PostgresGrammar::typePolygon() — Method in class PostgresGrammar

Create the column definition for a spatial Polygon type.

PostgresGrammar::typeGeometryCollection() — Method in class PostgresGrammar

Create the column definition for a spatial GeometryCollection type.

PostgresGrammar::typeMultiPoint() — Method in class PostgresGrammar

Create the column definition for a spatial MultiPoint type.

PostgresGrammar::typeMultiLineString() — Method in class PostgresGrammar

Create the column definition for a spatial MultiLineString type.

PostgresGrammar::typeMultiPolygon() — Method in class PostgresGrammar

Create the column definition for a spatial MultiPolygon type.

PostgresGrammar::typeMultiPolygonZ() — Method in class PostgresGrammar

Create the column definition for a spatial MultiPolygonZ type.

SQLiteGrammar::typeChar() — Method in class SQLiteGrammar

Create the column definition for a char type.

SQLiteGrammar::typeString() — Method in class SQLiteGrammar

Create the column definition for a string type.

SQLiteGrammar::typeTinyText() — Method in class SQLiteGrammar

Create the column definition for a tiny text type.

SQLiteGrammar::typeText() — Method in class SQLiteGrammar

Create the column definition for a text type.

SQLiteGrammar::typeMediumText() — Method in class SQLiteGrammar

Create the column definition for a medium text type.

SQLiteGrammar::typeLongText() — Method in class SQLiteGrammar

Create the column definition for a long text type.

SQLiteGrammar::typeInteger() — Method in class SQLiteGrammar

Create the column definition for an integer type.

SQLiteGrammar::typeBigInteger() — Method in class SQLiteGrammar

Create the column definition for a big integer type.

SQLiteGrammar::typeMediumInteger() — Method in class SQLiteGrammar

Create the column definition for a medium integer type.

SQLiteGrammar::typeTinyInteger() — Method in class SQLiteGrammar

Create the column definition for a tiny integer type.

SQLiteGrammar::typeSmallInteger() — Method in class SQLiteGrammar

Create the column definition for a small integer type.

SQLiteGrammar::typeFloat() — Method in class SQLiteGrammar

Create the column definition for a float type.

SQLiteGrammar::typeDouble() — Method in class SQLiteGrammar

Create the column definition for a double type.

SQLiteGrammar::typeDecimal() — Method in class SQLiteGrammar

Create the column definition for a decimal type.

SQLiteGrammar::typeBoolean() — Method in class SQLiteGrammar

Create the column definition for a boolean type.

SQLiteGrammar::typeEnum() — Method in class SQLiteGrammar

Create the column definition for an enumeration type.

SQLiteGrammar::typeJson() — Method in class SQLiteGrammar

Create the column definition for a json type.

SQLiteGrammar::typeJsonb() — Method in class SQLiteGrammar

Create the column definition for a jsonb type.

SQLiteGrammar::typeDate() — Method in class SQLiteGrammar

Create the column definition for a date type.

SQLiteGrammar::typeDateTime() — Method in class SQLiteGrammar

Create the column definition for a date-time type.

SQLiteGrammar::typeDateTimeTz() — Method in class SQLiteGrammar

Create the column definition for a date-time (with time zone) type.

SQLiteGrammar::typeTime() — Method in class SQLiteGrammar

Create the column definition for a time type.

SQLiteGrammar::typeTimeTz() — Method in class SQLiteGrammar

Create the column definition for a time (with time zone) type.

SQLiteGrammar::typeTimestamp() — Method in class SQLiteGrammar

Create the column definition for a timestamp type.

SQLiteGrammar::typeTimestampTz() — Method in class SQLiteGrammar

Create the column definition for a timestamp (with time zone) type.

SQLiteGrammar::typeYear() — Method in class SQLiteGrammar

Create the column definition for a year type.

SQLiteGrammar::typeBinary() — Method in class SQLiteGrammar

Create the column definition for a binary type.

SQLiteGrammar::typeUuid() — Method in class SQLiteGrammar

Create the column definition for a uuid type.

SQLiteGrammar::typeIpAddress() — Method in class SQLiteGrammar

Create the column definition for an IP address type.

SQLiteGrammar::typeMacAddress() — Method in class SQLiteGrammar

Create the column definition for a MAC address type.

SQLiteGrammar::typeGeometry() — Method in class SQLiteGrammar

Create the column definition for a spatial Geometry type.

SQLiteGrammar::typePoint() — Method in class SQLiteGrammar

Create the column definition for a spatial Point type.

SQLiteGrammar::typeLineString() — Method in class SQLiteGrammar

Create the column definition for a spatial LineString type.

SQLiteGrammar::typePolygon() — Method in class SQLiteGrammar

Create the column definition for a spatial Polygon type.

SQLiteGrammar::typeGeometryCollection() — Method in class SQLiteGrammar

Create the column definition for a spatial GeometryCollection type.

SQLiteGrammar::typeMultiPoint() — Method in class SQLiteGrammar

Create the column definition for a spatial MultiPoint type.

SQLiteGrammar::typeMultiLineString() — Method in class SQLiteGrammar

Create the column definition for a spatial MultiLineString type.

SQLiteGrammar::typeMultiPolygon() — Method in class SQLiteGrammar

Create the column definition for a spatial MultiPolygon type.

SQLiteGrammar::typeComputed() — Method in class SQLiteGrammar

Create the column definition for a generated, computed column type.

$ SqlServerGrammar#transactionsProperty in class SqlServerGrammar

If this Grammar supports schema changes wrapped in a transaction.

SqlServerGrammar::typeChar() — Method in class SqlServerGrammar

Create the column definition for a char type.

SqlServerGrammar::typeString() — Method in class SqlServerGrammar

Create the column definition for a string type.

SqlServerGrammar::typeTinyText() — Method in class SqlServerGrammar

Create the column definition for a tiny text type.

SqlServerGrammar::typeText() — Method in class SqlServerGrammar

Create the column definition for a text type.

SqlServerGrammar::typeMediumText() — Method in class SqlServerGrammar

Create the column definition for a medium text type.

SqlServerGrammar::typeLongText() — Method in class SqlServerGrammar

Create the column definition for a long text type.

SqlServerGrammar::typeInteger() — Method in class SqlServerGrammar

Create the column definition for an integer type.

SqlServerGrammar::typeBigInteger() — Method in class SqlServerGrammar

Create the column definition for a big integer type.

SqlServerGrammar::typeMediumInteger() — Method in class SqlServerGrammar

Create the column definition for a medium integer type.

SqlServerGrammar::typeTinyInteger() — Method in class SqlServerGrammar

Create the column definition for a tiny integer type.

SqlServerGrammar::typeSmallInteger() — Method in class SqlServerGrammar

Create the column definition for a small integer type.

SqlServerGrammar::typeFloat() — Method in class SqlServerGrammar

Create the column definition for a float type.

SqlServerGrammar::typeDouble() — Method in class SqlServerGrammar

Create the column definition for a double type.

SqlServerGrammar::typeDecimal() — Method in class SqlServerGrammar

Create the column definition for a decimal type.

SqlServerGrammar::typeBoolean() — Method in class SqlServerGrammar

Create the column definition for a boolean type.

SqlServerGrammar::typeEnum() — Method in class SqlServerGrammar

Create the column definition for an enumeration type.

SqlServerGrammar::typeJson() — Method in class SqlServerGrammar

Create the column definition for a json type.

SqlServerGrammar::typeJsonb() — Method in class SqlServerGrammar

Create the column definition for a jsonb type.

SqlServerGrammar::typeDate() — Method in class SqlServerGrammar

Create the column definition for a date type.

SqlServerGrammar::typeDateTime() — Method in class SqlServerGrammar

Create the column definition for a date-time type.

SqlServerGrammar::typeDateTimeTz() — Method in class SqlServerGrammar

Create the column definition for a date-time (with time zone) type.

SqlServerGrammar::typeTime() — Method in class SqlServerGrammar

Create the column definition for a time type.

SqlServerGrammar::typeTimeTz() — Method in class SqlServerGrammar

Create the column definition for a time (with time zone) type.

SqlServerGrammar::typeTimestamp() — Method in class SqlServerGrammar

Create the column definition for a timestamp type.

SqlServerGrammar::typeTimestampTz() — Method in class SqlServerGrammar

Create the column definition for a timestamp (with time zone) type.

SqlServerGrammar::typeYear() — Method in class SqlServerGrammar

Create the column definition for a year type.

SqlServerGrammar::typeBinary() — Method in class SqlServerGrammar

Create the column definition for a binary type.

SqlServerGrammar::typeUuid() — Method in class SqlServerGrammar

Create the column definition for a uuid type.

SqlServerGrammar::typeIpAddress() — Method in class SqlServerGrammar

Create the column definition for an IP address type.

SqlServerGrammar::typeMacAddress() — Method in class SqlServerGrammar

Create the column definition for a MAC address type.

SqlServerGrammar::typeGeometry() — Method in class SqlServerGrammar

Create the column definition for a spatial Geometry type.

SqlServerGrammar::typePoint() — Method in class SqlServerGrammar

Create the column definition for a spatial Point type.

SqlServerGrammar::typeLineString() — Method in class SqlServerGrammar

Create the column definition for a spatial LineString type.

SqlServerGrammar::typePolygon() — Method in class SqlServerGrammar

Create the column definition for a spatial Polygon type.

SqlServerGrammar::typeGeometryCollection() — Method in class SqlServerGrammar

Create the column definition for a spatial GeometryCollection type.

SqlServerGrammar::typeMultiPoint() — Method in class SqlServerGrammar

Create the column definition for a spatial MultiPoint type.

SqlServerGrammar::typeMultiLineString() — Method in class SqlServerGrammar

Create the column definition for a spatial MultiLineString type.

SqlServerGrammar::typeMultiPolygon() — Method in class SqlServerGrammar

Create the column definition for a spatial MultiPolygon type.

SqlServerGrammar::typeComputed() — Method in class SqlServerGrammar

Create the column definition for a generated, computed column type.

SqlServerConnection::transaction() — Method in class SqlServerConnection

Execute a Closure within a transaction.

$ CallQueuedListener#triesProperty in class CallQueuedListener

The number of times the job may be attempted.

$ CallQueuedListener#timeoutProperty in class CallQueuedListener

The number of seconds the job can run before timing out.

AwsS3V3Adapter::temporaryUrl() — Method in class AwsS3V3Adapter

Get a temporary URL for the file at the given path.

AwsS3V3Adapter::temporaryUploadUrl() — Method in class AwsS3V3Adapter

Get a temporary upload URL for the file at the given path.

Filesystem::type() — Method in class Filesystem

Get the file type of a given file.

$ FilesystemAdapter#temporaryUrlCallbackProperty in class FilesystemAdapter

The temporary URL builder callback.

FilesystemAdapter::temporaryUrl() — Method in class FilesystemAdapter

Get a temporary URL for the file at the given path.

FilesystemAdapter::temporaryUploadUrl() — Method in class FilesystemAdapter

Get a temporary upload URL for the file at the given path.

FilesystemAdapter::throwsExceptions() — Method in class FilesystemAdapter

Determine if Flysystem exceptions should be thrown.

LockableFile::truncate() — Method in class LockableFile

Truncate the file.

$ Application#terminatingCallbacksProperty in class Application

The array of terminating callbacks.

Application::terminating() — Method in class Application

Register a terminating callback with the application.

Application::terminate() — Method in class Application

Terminate the application.

$ CastMakeCommand#typeProperty in class CastMakeCommand

The type of class being generated.

$ ChannelListCommand#terminalWidthResolverProperty in class ChannelListCommand

The terminal width resolver callback.

$ ChannelMakeCommand#typeProperty in class ChannelMakeCommand

The type of class being generated.

$ ComponentMakeCommand#typeProperty in class ComponentMakeCommand

The type of class being generated.

$ ConsoleMakeCommand#typeProperty in class ConsoleMakeCommand

The type of class being generated.

$ EventMakeCommand#typeProperty in class EventMakeCommand

The type of class being generated.

$ ExceptionMakeCommand#typeProperty in class ExceptionMakeCommand

The type of class being generated.

$ JobMakeCommand#typeProperty in class JobMakeCommand

The type of class being generated.

Kernel::terminate() — Method in class Kernel

Terminate the application.

$ ListenerMakeCommand#typeProperty in class ListenerMakeCommand

The type of class being generated.

$ MailMakeCommand#typeProperty in class MailMakeCommand

The type of class being generated.

$ ModelMakeCommand#typeProperty in class ModelMakeCommand

The type of class being generated.

$ NotificationMakeCommand#typeProperty in class NotificationMakeCommand

The type of class being generated.

$ ObserverMakeCommand#typeProperty in class ObserverMakeCommand

The type of class being generated.

$ PolicyMakeCommand#typeProperty in class PolicyMakeCommand

The type of class being generated.

$ ProviderMakeCommand#typeProperty in class ProviderMakeCommand

The type of class being generated.

$ RequestMakeCommand#typeProperty in class RequestMakeCommand

The type of class being generated.

$ ResourceMakeCommand#typeProperty in class ResourceMakeCommand

The type of class being generated.

$ RouteListCommand#terminalWidthResolverProperty in class RouteListCommand

The terminal width resolver callback.

$ RuleMakeCommand#typeProperty in class RuleMakeCommand

The type of class being generated.

$ ScopeMakeCommand#typeProperty in class ScopeMakeCommand

The type of class being generated.

TestMakeCommandClass in namespace Illuminate\Foundation\Console
$ TestMakeCommand#typeProperty in class TestMakeCommand

The type of class being generated.

$ VendorPublishCommand#tagsProperty in class VendorPublishCommand

The tags to publish.

$ VendorTagPublished#tagProperty in class VendorTagPublished

The vendor tag that was published.

Handler::toIlluminateResponse() — Method in class Handler

Map the given exception into an Illuminate response.

Kernel::terminate() — Method in class Kernel

Call the terminate method on any terminable middleware.

Kernel::terminateMiddleware() — Method in class Kernel

Call the terminate method on any terminable middleware.

ConvertEmptyStringsToNull::transform() — Method in class ConvertEmptyStringsToNull

Transform the given value.

TransformsRequestClass in namespace Illuminate\Foundation\Http\Middleware
TransformsRequest::transform() — Method in class TransformsRequest

Transform the given value.

TrimStringsClass in namespace Illuminate\Foundation\Http\Middleware
TrimStrings::transform() — Method in class TrimStrings

Transform the given value.

VerifyCsrfToken::tokensMatch() — Method in class VerifyCsrfToken

Determine if the session and input CSRF tokens match.

InteractsWithRedis::tearDownRedis() — Method in class InteractsWithRedis

Teardown redis connection.

InteractsWithTime::travel() — Method in class InteractsWithTime

Begin travelling to another time.

InteractsWithTime::travelTo() — Method in class InteractsWithTime

Travel to another time.

InteractsWithTime::travelBack() — Method in class InteractsWithTime

Travel back to the current time.

DatabaseTruncation::truncateDatabaseTables() — Method in class DatabaseTruncation

Truncate the database tables for all configured connections.

DatabaseTruncation::truncateTablesForAllConnections() — Method in class DatabaseTruncation

Truncate the database tables for all configured connections.

DatabaseTruncation::truncateTablesForConnection() — Method in class DatabaseTruncation

Truncate the database tables for the given database connection.

TestCaseClass in namespace Illuminate\Foundation\Testing
TestCase::tearDown() — Method in class TestCase

Clean up the testing environment before the next test.

TestCase::tearDownAfterClass() — Method in class TestCase

Clean up the testing environment before the next test case.

Vite::toHtml() — Method in class Vite

Get the Vite tag content as a string of HTML.

$ ArgonHasher#timeProperty in class ArgonHasher

The default time cost factor.

$ ArgonHasher#threadsProperty in class ArgonHasher

The default threads factor.

ArgonHasher::time() — Method in class ArgonHasher

Extract the time cost value from the options array.

ArgonHasher::threads() — Method in class ArgonHasher

Extract the thread's value from the options array.

DeterminesStatusCode::tooManyRequests() — Method in class DeterminesStatusCode

Determine if the response was a 429 "Too Many Requests" response.

$ PendingRequest#transferStatsProperty in class PendingRequest

The transfer stats for the request.

$ PendingRequest#throwCallbackProperty in class PendingRequest

A callback to run when throwing if a server or client error occurs.

$ PendingRequest#throwIfCallbackProperty in class PendingRequest

A callback to check if an exception should be thrown when a server or client error occurs.

$ PendingRequest#triesProperty in class PendingRequest

The number of times to try the request.

PendingRequest::timeout() — Method in class PendingRequest

Specify the timeout (in seconds) for the request.

PendingRequest::throw() — Method in class PendingRequest

Throw an exception if a server or client error occurs.

PendingRequest::throwIf() — Method in class PendingRequest

Throw an exception if a server or client error occurred and the given condition evaluates to true.

PendingRequest::throwUnless() — Method in class PendingRequest

Throw an exception if a server or client error occurred and the given condition evaluates to false.

Request::toPsrRequest() — Method in class Request

Get the underlying PSR compliant request instance.

$ Response#transferStatsProperty in class Response

The transfer stats for the request.

Response::toPsrResponse() — Method in class Response

Get the underlying PSR response for the response.

Response::toException() — Method in class Response

Create an exception if a server or client error occurred.

Response::throw() — Method in class Response

Throw an exception if a server or client error occurred.

Response::throwIf() — Method in class Response

Throw an exception if a server or client error occurred and the given condition evaluates to true.

Response::throwIfStatus() — Method in class Response

Throw an exception if the response status code matches the given code.

Response::throwUnlessStatus() — Method in class Response

Throw an exception unless the response status code matches the given code.

Response::throwIfClientError() — Method in class Response

Throw an exception if the response status code is a 4xx level code.

Response::throwIfServerError() — Method in class Response

Throw an exception if the response status code is a 5xx level code.

ThrottleRequestsExceptionClass in namespace Illuminate\Http\Exceptions
TrustHostsClass in namespace Illuminate\Http\Middleware
TrustProxiesClass in namespace Illuminate\Http\Middleware
Request::toArray() — Method in class Request

Get all of the input and files for the request.

ConditionallyLoadsAttributes::transform() — Method in class ConditionallyLoadsAttributes

Transform the given value if it is present.

JsonResource::toArray() — Method in class JsonResource

Transform the resource into an array.

JsonResource::toJson() — Method in class JsonResource

Convert the model instance to JSON.

JsonResource::toResponse() — Method in class JsonResource

Create an HTTP response that represents the object.

PaginatedResourceResponse::toResponse() — Method in class PaginatedResourceResponse

Create an HTTP response that represents the object.

ResourceCollection::toArray() — Method in class ResourceCollection

Transform the resource into a JSON array.

ResourceCollection::toResponse() — Method in class ResourceCollection

Create an HTTP response that represents the object.

ResourceResponse::toResponse() — Method in class ResourceResponse

Create an HTTP response that represents the object.

ResponseTrait::throwResponse() — Method in class ResponseTrait

Throws the response in a HttpResponseException instance.

$ File#tempFileProperty in class File

The temporary file resource.

File::tempFilePath() — Method in class File

Get the path to the temporary file.

LogManager::tap() — Method in class LogManager

Apply the configured taps for the logger.

$ Mailable#toProperty in class Mailable

The "to" recipients of the message.

$ Mailable#textViewProperty in class Mailable

The plain text view to use for the message.

$ Mailable#tagsProperty in class Mailable

The tags for the message.

$ Mailable#themeProperty in class Mailable

The name of the theme that should be used when formatting the message.

Mailable::to() — Method in class Mailable

Set the recipients of the message.

Mailable::text() — Method in class Mailable

Set the plain text view for the message.

Mailable::tag() — Method in class Mailable

Add a tag header to the message when supported by the underlying transport.

$ Content#textProperty in class Content

The Blade view that represents the text version of the message.

Content::text() — Method in class Content

Set the plain text view for the message.

$ Envelope#toProperty in class Envelope

The recipients of the message.

$ Envelope#tagsProperty in class Envelope

The message's tags.

Envelope::to() — Method in class Envelope

Add a "to" recipient to the message envelope.

Envelope::tags() — Method in class Envelope

Add "tags" to the message.

Envelope::tag() — Method in class Envelope

Add a "tag" to the message.

$ Headers#textProperty in class Headers

The message's text headers.

Headers::text() — Method in class Headers

Set the headers for this message.

$ Mailer#transportProperty in class Mailer

The Symfony Transport instance.

$ Mailer#toProperty in class Mailer

The global to address and name.

Mailer::to() — Method in class Mailer

Begin the process of mailing a mailable class instance.

$ Markdown#themeProperty in class Markdown

The current theme being used when generating emails.

Markdown::textComponentPaths() — Method in class Markdown

Get the text component paths.

Markdown::theme() — Method in class Markdown

Set the default theme to be used.

Message::to() — Method in class Message

Add a recipient to the message.

$ PendingMail#toProperty in class PendingMail

The "to" recipients of the message.

PendingMail::to() — Method in class PendingMail

Set the recipients of the message.

$ SendQueuedMailable#triesProperty in class SendQueuedMailable

The number of times the job may be attempted.

$ SendQueuedMailable#timeoutProperty in class SendQueuedMailable

The number of seconds the job can run before timing out.

$ Action#textProperty in class Action

The action text.

$ DatabaseNotification#tableProperty in class DatabaseNotification

The table associated with the model.

$ MailMessage#themeProperty in class MailMessage

The current theme being used when generating emails.

$ MailMessage#tagsProperty in class MailMessage

The tags for the message.

MailMessage::template() — Method in class MailMessage

Set the default markdown template.

MailMessage::theme() — Method in class MailMessage

Set the theme to use with the Markdown template.

MailMessage::tag() — Method in class MailMessage

Add a tag header to the message when supported by the underlying transport.

SimpleMessage::toArray() — Method in class SimpleMessage

Get an array representation of the message.

$ SendQueuedNotifications#triesProperty in class SendQueuedNotifications

The number of times the job may be attempted.

$ SendQueuedNotifications#timeoutProperty in class SendQueuedNotifications

The number of seconds the job can run before timing out.

AbstractCursorPaginator::through() — Method in class AbstractCursorPaginator

Transform each item in the slice of items using a callback.

AbstractCursorPaginator::toHtml() — Method in class AbstractCursorPaginator

Render the contents of the paginator to HTML.

AbstractPaginator::through() — Method in class AbstractPaginator

Transform each item in the slice of items using a callback.

AbstractPaginator::toHtml() — Method in class AbstractPaginator

Render the contents of the paginator to HTML.

Cursor::toArray() — Method in class Cursor

Get the array representation of the cursor.

CursorPaginator::toArray() — Method in class CursorPaginator

Get the instance as an array.

CursorPaginator::toJson() — Method in class CursorPaginator

Convert the object to its JSON representation.

$ LengthAwarePaginator#totalProperty in class LengthAwarePaginator

The total number of items before slicing.

LengthAwarePaginator::total() — Method in class LengthAwarePaginator

Get the total number of items being paginated.

LengthAwarePaginator::toArray() — Method in class LengthAwarePaginator

Get the instance as an array.

LengthAwarePaginator::toJson() — Method in class LengthAwarePaginator

Convert the object to its JSON representation.

Paginator::toArray() — Method in class Paginator

Get the instance as an array.

Paginator::toJson() — Method in class Paginator

Convert the object to its JSON representation.

Pipeline::through() — Method in class Pipeline

Set the array of pipes.

Pipeline::then() — Method in class Pipeline

Run the pipeline with a final destination callback.

Pipeline::thenReturn() — Method in class Pipeline

Run the pipeline and return the result.

FakeProcessDescription::toSymfonyProcess() — Method in class FakeProcessDescription

Turn the fake process description into an actual process.

FakeProcessDescription::toProcessResult() — Method in class FakeProcessDescription

Conver the process description into a process result.

FakeProcessResult::throw() — Method in class FakeProcessResult

Throw an exception if the process failed.

FakeProcessResult::throwIf() — Method in class FakeProcessResult

Throw an exception if the process failed and the given condition is true.

FakeProcessSequence::toProcessResult() — Method in class FakeProcessSequence

Convert the given result into an actual process result or description.

$ PendingProcess#timeoutProperty in class PendingProcess

The maximum number of seconds the process may run.

$ PendingProcess#ttyProperty in class PendingProcess

Indicates if TTY mode should be enabled.

PendingProcess::timeout() — Method in class PendingProcess

Specify the maximum number of seconds the process may run.

PendingProcess::tty() — Method in class PendingProcess

Enable TTY mode for the process.

PendingProcess::toSymfonyProcess() — Method in class PendingProcess

Get a Symfony Process instance from the current pending command.

ProcessResult::throw() — Method in class ProcessResult

Throw an exception if the process failed.

ProcessResult::throwIf() — Method in class ProcessResult

Throw an exception if the process failed and the given condition is true.

$ BeanstalkdQueue#timeToRunProperty in class BeanstalkdQueue

The "time to run" for all pushed jobs.

TableCommandClass in namespace Illuminate\Queue\Console
$ DatabaseQueue#tableProperty in class DatabaseQueue

The database table that holds the jobs.

$ DatabaseFailedJobProvider#tableProperty in class DatabaseFailedJobProvider

The database table.

$ DatabaseUuidFailedJobProvider#tableProperty in class DatabaseUuidFailedJobProvider

The database table.

$ DynamoDbFailedJobProvider#tableProperty in class DynamoDbFailedJobProvider

The table name.

DatabaseJobRecord::touch() — Method in class DatabaseJobRecord

Update the "reserved at" timestamp of the job.

Job::timeout() — Method in class Job

Get the number of seconds the job can run.

RateLimitedWithRedis::tooManyAttempts() — Method in class RateLimitedWithRedis

Determine if the given key has been "accessed" too many times.

ThrottlesExceptionsClass in namespace Illuminate\Queue\Middleware
ThrottlesExceptionsWithRedisClass in namespace Illuminate\Queue\Middleware
Worker::timeoutForJob() — Method in class Worker

Get the appropriate timeout for the given job.

$ WorkerOptions#timeoutProperty in class WorkerOptions

The maximum number of seconds a child worker may run.

Connection::throttle() — Method in class Connection

Throttle a callback for a maximum number of executions over a given duration.

PhpRedisConnection::transaction() — Method in class PhpRedisConnection

Execute commands in a transaction.

$ CommandExecuted#timeProperty in class CommandExecuted

The number of milliseconds it took to execute the command.

$ ConcurrencyLimiterBuilder#timeoutProperty in class ConcurrencyLimiterBuilder

The amount of time to block until a lock is available.

ConcurrencyLimiterBuilder::then() — Method in class ConcurrencyLimiterBuilder

Execute the given callback if a lock is obtained, otherwise call the failure callback.

DurationLimiter::tooManyAttempts() — Method in class DurationLimiter

Determine if the key has been "accessed" too many times.

DurationLimiter::tooManyAttemptsLuaScript() — Method in class DurationLimiter

Get the Lua script to determine if the key has been "accessed" too many times.

$ DurationLimiterBuilder#timeoutProperty in class DurationLimiterBuilder

The amount of time to block until a lock is available.

DurationLimiterBuilder::then() — Method in class DurationLimiterBuilder

Execute the given callback if a lock is obtained, otherwise call the failure callback.

AbstractRouteCollection::toSymfonyRouteCollection() — Method in class AbstractRouteCollection

Convert the collection to a Symfony RouteCollection instance.

$ ControllerMakeCommand#typeProperty in class ControllerMakeCommand

The type of class being generated.

$ MiddlewareMakeCommand#typeProperty in class MiddlewareMakeCommand

The type of class being generated.

ThrottleRequestsClass in namespace Illuminate\Routing\Middleware
ThrottleRequestsWithRedisClass in namespace Illuminate\Routing\Middleware
ThrottleRequestsWithRedis::tooManyAttempts() — Method in class ThrottleRequestsWithRedis

Determine if the given key has been "accessed" too many times.

Redirector::to() — Method in class Redirector

Create a new redirect response to the given path.

Redirector::temporarySignedRoute() — Method in class Redirector

Create a new redirect response to a signed named route.

Route::toSymfonyRoute() — Method in class Route

Convert the route to a Symfony route.

RouteCollection::toSymfonyRouteCollection() — Method in class RouteCollection

Convert the collection to a Symfony RouteCollection instance.

RouteCollection::toCompiledRouteCollection() — Method in class RouteCollection

Convert the collection to a CompiledRouteCollection instance.

RouteDependencyResolverTrait::transformDependency() — Method in class RouteDependencyResolverTrait

Attempt to transform the given parameter into a class instance.

RouteUrlGenerator::to() — Method in class RouteUrlGenerator

Generate a URL for the given route.

Router::toResponse() — Method in class Router

Static version of prepareResponse.

UrlGenerator::to() — Method in class UrlGenerator

Generate an absolute URL to the given path.

UrlGenerator::temporarySignedRoute() — Method in class UrlGenerator

Create a temporary signed route URL for a named route.

UrlGenerator::toRoute() — Method in class UrlGenerator

Get the URL for a given route instance.

$ DatabaseSessionHandler#tableProperty in class DatabaseSessionHandler

The name of the session table.

Store::token() — Method in class Store

Get the CSRF token value.

TokenMismatchExceptionClass in namespace Illuminate\Session
Arr::toCssClasses() — Method in class Arr

Conditionally compile classes from an array into a CSS class list.

Arr::toCssStyles() — Method in class Arr

Conditionally compile styles from an array into a style list.

Collection::take() — Method in class Collection

Take the first or last {$limit} items.

Collection::takeUntil() — Method in class Collection

Take items in the collection until the given condition is met.

Collection::takeWhile() — Method in class Collection

Take items in the collection while the given condition is met.

Collection::transform() — Method in class Collection

Transform each item in the collection using a callback.

Collection::toBase() — Method in class Collection

Get a base Support collection instance from this collection.

DateFactory::today() — Method in class DateFactory
DateFactory::tomorrow() — Method in class DateFactory
Enumerable::times() — Method in class Enumerable

Create a new instance by invoking the callback a given amount of times.

Enumerable::take() — Method in class Enumerable

Take the first or last {$limit} items.

Enumerable::takeUntil() — Method in class Enumerable

Take items in the collection until the given condition is met.

Enumerable::takeWhile() — Method in class Enumerable

Take items in the collection while the given condition is met.

Enumerable::tap() — Method in class Enumerable

Pass the collection to the given callback and then return it.

Enumerable::toArray() — Method in class Enumerable
Enumerable::toJson() — Method in class Enumerable

Get the collection of items as JSON.

App::terminating() — Method in class App
App::terminate() — Method in class App
App::tag() — Method in class App
App::tagged() — Method in class App
Artisan::terminate() — Method in class Artisan
Cache::tags() — Method in class Cache
DB::table() — Method in class DB
DB::totalQueryDuration() — Method in class DB
DB::transaction() — Method in class DB
DB::transactionLevel() — Method in class DB
Date::today() — Method in class Date
Date::tomorrow() — Method in class Date
File::type() — Method in class File
Http::timeout() — Method in class Http
Http::throw() — Method in class Http
Http::throwIf() — Method in class Http
Http::throwUnless() — Method in class Http
Mail::to() — Method in class Mail
ParallelTesting::tearDownProcess() — Method in class ParallelTesting
ParallelTesting::tearDownTestCase() — Method in class ParallelTesting
ParallelTesting::token() — Method in class ParallelTesting
Password::tokenExists() — Method in class Password
Pipeline::through() — Method in class Pipeline
Pipeline::then() — Method in class Pipeline
Pipeline::thenReturn() — Method in class Pipeline
Process::timeout() — Method in class Process
Process::tty() — Method in class Process
RateLimiter::tooManyAttempts() — Method in class RateLimiter
Redirect::to() — Method in class Redirect
Redirect::temporarySignedRoute() — Method in class Redirect
Redis::throttle() — Method in class Redis
Request::toArray() — Method in class Request
Route::toResponse() — Method in class Route
Schema::table() — Method in class Schema
Session::token() — Method in class Session
Storage::temporaryUrl() — Method in class Storage
Storage::temporaryUploadUrl() — Method in class Storage
URL::to() — Method in class URL
URL::temporarySignedRoute() — Method in class URL
URL::toRoute() — Method in class URL
Vite::toHtml() — Method in class Vite
Fluent::toArray() — Method in class Fluent
Fluent::toJson() — Method in class Fluent

Convert the fluent instance to JSON.

$ HigherOrderTapProxy#targetProperty in class HigherOrderTapProxy

The target being tapped.

$ HigherOrderWhenProxy#targetProperty in class HigherOrderWhenProxy

The target being conditionally operated on.

HtmlString::toHtml() — Method in class HtmlString

Get the HTML string.

Js::toHtml() — Method in class Js

Get the string representation of the data for use in HTML.

LazyCollection::take() — Method in class LazyCollection

Take the first or last {$limit} items.

LazyCollection::takeUntil() — Method in class LazyCollection

Take items in the collection until the given condition is met.

LazyCollection::takeUntilTimeout() — Method in class LazyCollection

Take items in the collection until a given point in time.

LazyCollection::takeWhile() — Method in class LazyCollection

Take items in the collection while the given condition is met.

LazyCollection::tapEach() — Method in class LazyCollection

Pass each item in the collection to the given callback, lazily.

MessageBag::transform() — Method in class MessageBag

Format an array of messages.

MessageBag::toArray() — Method in class MessageBag

Get the instance as an array.

MessageBag::toJson() — Method in class MessageBag

Convert the object to its JSON representation.

Str::transliterate() — Method in class Str

Transliterate a string to its closest ASCII representation.

Str::title() — Method in class Str

Convert the given string to title case.

Stringable::test() — Method in class Stringable

Determine if the string matches the given pattern.

Stringable::title() — Method in class Stringable

Convert the given string to title case.

Stringable::trim() — Method in class Stringable

Trim the string of the given characters.

Stringable::toHtmlString() — Method in class Stringable

Convert the string into a HtmlString instance.

Stringable::toString() — Method in class Stringable

Get the underlying string value.

Stringable::toInteger() — Method in class Stringable

Get the underlying string value as an integer.

Stringable::toFloat() — Method in class Stringable

Get the underlying string value as a float.

Stringable::toBoolean() — Method in class Stringable

Get the underlying string value as a boolean.

Stringable::toDate() — Method in class Stringable

Get the underlying string value as a Carbon instance.

BatchRepositoryFake::transaction() — Method in class BatchRepositoryFake

Execute the given Closure within a storage specific transaction.

MailFake::to() — Method in class MailFake

Begin the process of mailing a mailable class instance.

TimeboxClass in namespace Illuminate\Support
$ EnumeratesValues#takeUntilProperty in class EnumeratesValues
$ EnumeratesValues#takeWhileProperty in class EnumeratesValues
EnumeratesValues::times() — Method in class EnumeratesValues
EnumeratesValues::tap() — Method in class EnumeratesValues

Pass the collection to the given callback and then return it.

EnumeratesValues::toArray() — Method in class EnumeratesValues
EnumeratesValues::toJson() — Method in class EnumeratesValues

Get the collection of items as JSON.

ForwardsCalls::throwBadMethodCallException() — Method in class ForwardsCalls

Throw a bad method call exception for the given method.

TappableClass in namespace Illuminate\Support\Traits
Tappable::tap() — Method in class Tappable

Call the given Closure with this instance then return the instance.

ValidatedInput::toArray() — Method in class ValidatedInput

Get the instance as an array.

TestDatabasesClass in namespace Illuminate\Testing\Concerns
TestDatabases::testDatabase() — Method in class TestDatabases

Returns the test database name.

ArraySubset::toString() — Method in class ArraySubset

Returns a string representation of the constraint.

CountInDatabase::toString() — Method in class CountInDatabase

Get a string representation of the object.

HasInDatabase::toString() — Method in class HasInDatabase

Get a string representation of the object.

NotSoftDeletedInDatabase::toString() — Method in class NotSoftDeletedInDatabase

Get a string representation of the object.

SeeInOrder::toString() — Method in class SeeInOrder

Get a string representation of the object.

SoftDeletedInDatabase::toString() — Method in class SoftDeletedInDatabase

Get a string representation of the object.

AssertableJson::toArray() — Method in class AssertableJson

Get the instance as an array.

$ ParallelTesting#tokenResolverProperty in class ParallelTesting

The token resolver callback.

$ ParallelTesting#tearDownProcessCallbacksProperty in class ParallelTesting

All of the registered "tearDown" process callbacks.

$ ParallelTesting#tearDownTestCaseCallbacksProperty in class ParallelTesting

All of the registered "tearDown" test case callbacks.

ParallelTesting::tearDownProcess() — Method in class ParallelTesting

Register a "tearDown" process callback.

ParallelTesting::tearDownTestCase() — Method in class ParallelTesting

Register a "tearDown" test case callback.

ParallelTesting::token() — Method in class ParallelTesting

Gets a unique test token.

$ PendingCommand#testProperty in class PendingCommand

The test being run.

TestComponentClass in namespace Illuminate\Testing
TestResponseClass in namespace Illuminate\Testing
TestResponse::transformNotSuccessfulException() — Method in class TestResponse

This method is called when test method did not execute successfully.

TestViewClass in namespace Illuminate\Testing
$ PotentiallyTranslatedString#translationProperty in class PotentiallyTranslatedString

The translated string.

$ PotentiallyTranslatedString#translatorProperty in class PotentiallyTranslatedString

The validator that may perform the translation.

PotentiallyTranslatedString::translate() — Method in class PotentiallyTranslatedString

Translate the string.

PotentiallyTranslatedString::translateChoice() — Method in class PotentiallyTranslatedString

Translates the string based on a count.

PotentiallyTranslatedString::toString() — Method in class PotentiallyTranslatedString

Get the potentially translated string.

TranslationServiceProviderClass in namespace Illuminate\Translation
TranslatorClass in namespace Illuminate\Translation
ValidatesAttributes::trim() — Method in class ValidatesAttributes

Trim the value if it is a string.

DatabasePresenceVerifier::table() — Method in class DatabasePresenceVerifier

Get a query builder for the given table.

$ Factory#translatorProperty in class Factory

The Translator implementation.

$ NotPwnedVerifier#timeoutProperty in class NotPwnedVerifier

The number of seconds the request can run before timing out.

$ DatabaseRule#tableProperty in class DatabaseRule

The table to run the query against.

$ Enum#typeProperty in class Enum

The type of the enum.

File::types() — Method in class File

Limit the uploaded file to the given MIME types or file extensions.

$ Validator#translatorProperty in class Validator

The Translator implementation.

$ BladeCompiler#templateProperty in class BladeCompiler
ComponentAttributeBag::thatStartWith() — Method in class ComponentAttributeBag

Return a bag of attributes that have keys starting with the given value / pattern.

ComponentAttributeBag::toHtml() — Method in class ComponentAttributeBag

Get content as a string of HTML.

ComponentSlot::toHtml() — Method in class ComponentSlot

Get the slot's HTML string.

$ ManagesTranslations#translationReplacementsProperty in class ManagesTranslations

The translation replacements for the translation being rendered.

View::toHtml() — Method in class View

Get content as a string of HTML.

U

$ GateEvaluated#userProperty in class GateEvaluated

The authenticatable model.

$ Gate#userResolverProperty in class Gate

The user resolver callable.

$ AuthManager#userResolverProperty in class AuthManager

The user resolver shared by various services.

AuthManager::userResolver() — Method in class AuthManager

Get the user resolver callback.

DatabaseUserProvider::updateRememberToken() — Method in class DatabaseUserProvider

Update the "remember me" token for the given user in storage.

EloquentUserProvider::updateRememberToken() — Method in class EloquentUserProvider

Update the "remember me" token for the given user in storage.

$ Authenticated#userProperty in class Authenticated

The authenticated user.

$ CurrentDeviceLogout#userProperty in class CurrentDeviceLogout

The authenticated user.

$ Failed#userProperty in class Failed

The user the attempter was trying to authenticate as.

$ Login#userProperty in class Login

The authenticated user.

$ Logout#userProperty in class Logout

The authenticated user.

$ OtherDeviceLogout#userProperty in class OtherDeviceLogout

The authenticated user.

$ PasswordReset#userProperty in class PasswordReset

The user.

$ Registered#userProperty in class Registered

The authenticated user.

$ Validated#userProperty in class Validated

The user retrieved and validated from the User Provider.

$ Verified#userProperty in class Verified

The verified user.

$ GuardHelpers#userProperty in class GuardHelpers

The currently authenticated user.

Authenticate::unauthenticated() — Method in class Authenticate

Handle an unauthenticated user.

$ RequirePassword#urlGeneratorProperty in class RequirePassword

The URL generator instance.

$ PasswordBroker#usersProperty in class PasswordBroker

The user provider implementation.

RequestGuard::user() — Method in class RequestGuard

Get the currently authenticated user.

SessionGuard::user() — Method in class SessionGuard

Get the currently authenticated user.

SessionGuard::userFromRecaller() — Method in class SessionGuard

Pull a user from the repository by its "remember me" cookie token.

SessionGuard::updateSession() — Method in class SessionGuard

Update the session with the given ID.

TokenGuard::user() — Method in class TokenGuard

Get the currently authenticated user.

BroadcastManager::userRoutes() — Method in class BroadcastManager

Register the routes for handling broadcast user authentication.

UsePusherChannelConventionsClass in namespace Illuminate\Broadcasting\Broadcasters
UniqueBroadcastEventClass in namespace Illuminate\Broadcasting
$ UniqueBroadcastEvent#uniqueIdProperty in class UniqueBroadcastEvent

The unique lock identifier.

$ UniqueBroadcastEvent#uniqueForProperty in class UniqueBroadcastEvent

The number of seconds the unique lock should be maintained.

UniqueBroadcastEvent::uniqueVia() — Method in class UniqueBroadcastEvent

Resolve the cache implementation that should manage the event's uniqueness.

DatabaseBatchRepository::updateAtomicValues() — Method in class DatabaseBatchRepository

Update an atomic value within the batch.

DatabaseBatchRepository::unserialize() — Method in class DatabaseBatchRepository

Unserialize the given value.

UniqueLockClass in namespace Illuminate\Bus
UpdatedBatchJobCountsClass in namespace Illuminate\Bus
DatabaseStore::unserialize() — Method in class DatabaseStore

Unserialize the given value.

DynamoDbStore::unserialize() — Method in class DynamoDbStore

Unserialize the value.

UnlimitedClass in namespace Illuminate\Cache\RateLimiting
RedisStore::unserialize() — Method in class RedisStore

Unserialize the value.

CacheCommandMutex::useStore() — Method in class CacheCommandMutex

Specify the cache store that should be used.

InteractsWithSignals::untrap() — Method in class InteractsWithSignals

Untrap signal handlers set within the command's handler.

GeneratorCommand::userProviderModel() — Method in class GeneratorCommand

Get the model for the default guard's user provider.

CacheAware::useStore() — Method in class CacheAware

Specify the cache store that should be used.

CacheEventMutex::useStore() — Method in class CacheEventMutex

Specify the cache store that should be used.

CacheSchedulingMutex::useStore() — Method in class CacheSchedulingMutex

Specify the cache store that should be used.

$ Event#userProperty in class Event

The user the command should run as.

Event::user() — Method in class Event

Set which user the command should run as.

ManagesFrequencies::unlessBetween() — Method in class ManagesFrequencies

Schedule the event to not run between start and end time.

Schedule::useCache() — Method in class Schedule

Specify the cache store that should be used to store mutexes.

Signals::unregister() — Method in class Signals

Unregister the current signal handlers.

Component::usingQuestionHelper() — Method in class Component

Eventually performs a question using the component's question helper.

Container::unresolvablePrimitive() — Method in class Container

Throw an exception for an unresolvable primitive.

UtilClass in namespace Illuminate\Container
Util::unwrapIfClosure() — Method in class Util

Return the default value of the given value.

Guard::user() — Method in class Guard

Get the currently authenticated user.

UserProviderClass in namespace Illuminate\Contracts\Auth
UserProvider::updateRememberToken() — Method in class UserProvider

Update the "remember me" token for the given user in storage.

QueueingFactory::unqueue() — Method in class QueueingFactory

Remove a cookie from the queue.

ModelIdentifier::useCollectionClass() — Method in class ModelIdentifier

Specify the collection class that should be used when serializing / restoring collections.

Dispatcher::until() — Method in class Dispatcher

Dispatch an event until the first non-null response is returned.

Cloud::url() — Method in class Cloud

Get the URL for the file at the given path.

CursorPaginator::url() — Method in class CursorPaginator

Get the URL for a given cursor.

Paginator::url() — Method in class Paginator

Get the URL for a given page.

Job::uuid() — Method in class Job

Get the UUID of the job.

UrlGeneratorClass in namespace Illuminate\Contracts\Routing
UrlRoutableClass in namespace Illuminate\Contracts\Routing
UncompromisedVerifierClass in namespace Illuminate\Contracts\Validation
CookieJar::unqueue() — Method in class CookieJar

Remove a cookie from the queue.

Connection::useDefaultQueryGrammar() — Method in class Connection

Set the query grammar to the default implementation.

Connection::useDefaultSchemaGrammar() — Method in class Connection

Set the schema grammar to the default implementation.

Connection::useDefaultPostProcessor() — Method in class Connection

Set the query post processor to the default implementation.

Connection::update() — Method in class Connection

Run an update statement against the database.

Connection::unprepared() — Method in class Connection

Run a raw, unprepared query against the PDO connection.

Connection::useWriteConnectionWhenReading() — Method in class Connection

Indicate that the connection should use the write PDO connection for reads.

Connection::usingNativeSchemaOperations() — Method in class Connection

Indicates whether native alter operations will be used when dropping, renaming, or modifying columns, even if Doctrine DBAL is installed.

Connection::unsetEventDispatcher() — Method in class Connection

Unset the event dispatcher for this connection.

Connection::unsetTransactionManager() — Method in class Connection

Unset the transaction manager for this connection.

ConnectionInterface::update() — Method in class ConnectionInterface

Run an update statement against the database.

ConnectionInterface::unprepared() — Method in class ConnectionInterface

Run a raw, unprepared query against the PDO connection.

BaseCommand::usingRealPath() — Method in class BaseCommand

Determine if the given path(s) are pre-resolved "real" paths.

DatabaseManager::usingConnection() — Method in class DatabaseManager

Set the default database connection for the callback execution.

Builder::updateOrCreate() — Method in class Builder

Create or update a record matching the attributes, and fill it with values.

Builder::update() — Method in class Builder

Update records in the database.

Builder::upsert() — Method in class Builder

Insert new records or update the existing ones.

Collection::unique() — Method in class Collection
$ GuardsAttributes#unguardedProperty in class GuardsAttributes

Indicates if all mass assignment is enabled.

GuardsAttributes::unguard() — Method in class GuardsAttributes

Disable all mass assignable restrictions.

GuardsAttributes::unguarded() — Method in class GuardsAttributes

Run the given callable while being unguarded.

HasEvents::updating() — Method in class HasEvents

Register an updating model event with the dispatcher.

HasEvents::updated() — Method in class HasEvents

Register an updated model event with the dispatcher.

HasEvents::unsetEventDispatcher() — Method in class HasEvents

Unset the event dispatcher for models.

HasRelationships::unsetRelation() — Method in class HasRelationships

Unset a loaded relationship.

HasRelationships::unsetRelations() — Method in class HasRelationships

Unset all the loaded relations for the instance.

HasTimestamps::updateTimestamps() — Method in class HasTimestamps

Update the creation and update timestamps.

HasTimestamps::usesTimestamps() — Method in class HasTimestamps

Determine if the model uses timestamps.

HasUlids::uniqueIds() — Method in class HasUlids

Get the columns that should receive a unique identifier.

$ HasUniqueIds#usesUniqueIdsProperty in class HasUniqueIds

Indicates if the model uses unique ids.

HasUniqueIds::usesUniqueIds() — Method in class HasUniqueIds

Determine if the model uses unique ids.

HasUniqueIds::uniqueIds() — Method in class HasUniqueIds

Get the columns that should receive a unique identifier.

HasUuids::uniqueIds() — Method in class HasUuids

Get the columns that should receive a unique identifier.

Factory::useNamespace() — Method in class Factory

Specify the default namespace that contains the application's model factories.

Model::update() — Method in class Model

Update the model in the database.

Model::updateOrFail() — Method in class Model

Update the model in the database within a transaction.

Model::updateQuietly() — Method in class Model

Update the model in the database without raising any events.

Model::unsetConnectionResolver() — Method in class Model

Unset the connection resolver for models.

$ BelongsToMany#usingProperty in class BelongsToMany

The class name of the custom pivot model to use for the relationship.

BelongsToMany::using() — Method in class BelongsToMany

Specify the custom pivot model to use for the relationship.

BelongsToMany::updateOrCreate() — Method in class BelongsToMany

Create or update a related record matching the attributes, and fill it with values.

BelongsToMany::updatedAt() — Method in class BelongsToMany

Get the name of the "updated at" column.

AsPivot::unsetRelations() — Method in class AsPivot

Unset all the loaded relations for the instance.

InteractsWithPivotTable::updateExistingPivot() — Method in class InteractsWithPivotTable

Update an existing pivot record on the table.

InteractsWithPivotTable::updateExistingPivotUsingCustomClass() — Method in class InteractsWithPivotTable

Update an existing pivot record on the table via a custom class.

HasManyThrough::updateOrCreate() — Method in class HasManyThrough

Create or update a related record matching the attributes, and fill it with values.

HasOneOrMany::updateOrCreate() — Method in class HasOneOrMany

Create or update a related record matching the attributes, and fill it with values.

Relation::updatedAt() — Method in class Relation

Get the name of the "updated at" column.

Migrator::usingConnection() — Method in class Migrator

Execute the given callback using the given connection as the default connection.

$ Builder#unionsProperty in class Builder

The query union statements.

$ Builder#unionLimitProperty in class Builder

The maximum number of union records to return.

$ Builder#unionOffsetProperty in class Builder

The number of union records to skip.

$ Builder#unionOrdersProperty in class Builder

The orderings for the union query.

$ Builder#useWritePdoProperty in class Builder

Whether to use write pdo for the select.

Builder::useIndex() — Method in class Builder

Add an index hint to suggest a query index.

Builder::union() — Method in class Builder

Add a union statement to the query.

Builder::unionAll() — Method in class Builder

Add a union all statement to the query.

Builder::update() — Method in class Builder

Update records in the database.

Builder::updateFrom() — Method in class Builder

Update records in a PostgreSQL database using the update from syntax.

Builder::updateOrInsert() — Method in class Builder

Insert or update a record matching the attributes, and fill it with values.

Builder::upsert() — Method in class Builder

Insert new records or update the existing ones.

Builder::useWritePdo() — Method in class Builder

Use the "write" PDO connection when executing the query.

Blueprint::unique() — Method in class Blueprint

Specify a unique index for the table.

Blueprint::unsignedInteger() — Method in class Blueprint

Create a new unsigned integer (4-byte) column on the table.

Blueprint::unsignedTinyInteger() — Method in class Blueprint

Create a new unsigned tiny integer (1-byte) column on the table.

Blueprint::unsignedSmallInteger() — Method in class Blueprint

Create a new unsigned small integer (2-byte) column on the table.

Blueprint::unsignedMediumInteger() — Method in class Blueprint

Create a new unsigned medium integer (3-byte) column on the table.

Blueprint::unsignedBigInteger() — Method in class Blueprint

Create a new unsigned big integer (8-byte) column on the table.

Blueprint::unsignedFloat() — Method in class Blueprint

Create a new unsigned float column on the table.

Blueprint::unsignedDouble() — Method in class Blueprint

Create a new unsigned double column on the table.

Blueprint::unsignedDecimal() — Method in class Blueprint

Create a new unsigned decimal column on the table.

Blueprint::uuid() — Method in class Blueprint

Create a new UUID column on the table.

Blueprint::ulid() — Method in class Blueprint

Create a new ULID column on the table.

Blueprint::uuidMorphs() — Method in class Blueprint

Add the proper columns for a polymorphic table using UUIDs.

Blueprint::ulidMorphs() — Method in class Blueprint

Add the proper columns for a polymorphic table using ULIDs.

Builder::useNativeSchemaOperationsIfPossible() — Method in class Builder

Attempt to use native schema operations for dropping, renaming, and modifying columns, even if Doctrine DBAL is installed.

ColumnDefinition::unique() — Method in class ColumnDefinition

Add a unique index

ColumnDefinition::unsigned() — Method in class ColumnDefinition
ColumnDefinition::useCurrent() — Method in class ColumnDefinition

Set the TIMESTAMP column to use CURRENT_TIMESTAMP as default value

ColumnDefinition::useCurrentOnUpdate() — Method in class ColumnDefinition
Dispatcher::until() — Method in class Dispatcher

Fire an event until the first non-null response is returned.

NullDispatcher::until() — Method in class NullDispatcher

Don't dispatch an event.

AwsS3V3Adapter::url() — Method in class AwsS3V3Adapter

Get the URL for the file at the given path.

FilesystemAdapter::url() — Method in class FilesystemAdapter

Get the URL for the file at the given path.

Application::useAppPath() — Method in class Application

Set the application directory.

Application::useBootstrapPath() — Method in class Application

Set the bootstrap file directory.

Application::useConfigPath() — Method in class Application

Set the configuration directory.

Application::useDatabasePath() — Method in class Application

Set the database directory.

Application::useLangPath() — Method in class Application

Set the language file directory.

Application::usePublicPath() — Method in class Application

Set the public / web directory.

Application::useStoragePath() — Method in class Application

Set the storage directory.

Application::useEnvironmentPath() — Method in class Application

Set the directory for the environment file.

UserClass in namespace Illuminate\Foundation\Auth
$ DocsCommand#urlOpenerProperty in class DocsCommand

The custom URL opener.

DocsCommand::url() — Method in class DocsCommand

The URL to the documentation page.

PolicyMakeCommand::userProviderModel() — Method in class PolicyMakeCommand

Get the model for the guard's user provider.

UpCommandClass in namespace Illuminate\Foundation\Console
Handler::unauthenticated() — Method in class Handler

Convert an authentication exception into a response.

$ InteractsWithConsole#unexpectedOutputProperty in class InteractsWithConsole

All of the output lines that aren't expected to be displayed.

$ InteractsWithConsole#unexpectedOutputSubstringsProperty in class InteractsWithConsole

All of the text that is not expected to be present in the output.

InteractsWithContainer::useIntegrityKey() — Method in class InteractsWithContainer
InteractsWithContainer::useBuildDirectory() — Method in class InteractsWithContainer
InteractsWithContainer::useHotFile() — Method in class InteractsWithContainer
InteractsWithContainer::useScriptTagAttributes() — Method in class InteractsWithContainer
InteractsWithContainer::useStyleTagAttributes() — Method in class InteractsWithContainer
$ MakesHttpRequests#unencryptedCookiesProperty in class MakesHttpRequests

Additional cookies will not be encrypted for the request.

RefreshDatabase::usingInMemoryDatabase() — Method in class RefreshDatabase

Determine if an in-memory database is being used.

Vite::useCspNonce() — Method in class Vite

Generate or set a Content Security Policy nonce to apply to all generated tags.

Vite::useIntegrityKey() — Method in class Vite

Use the given key to detect integrity hashes in the manifest.

Vite::useManifestFilename() — Method in class Vite

Set the filename for the manifest file.

Vite::useHotFile() — Method in class Vite

Set the Vite "hot" file path.

Vite::useBuildDirectory() — Method in class Vite

Set the Vite build directory.

Vite::useScriptTagAttributes() — Method in class Vite

Use the given callback to resolve attributes for script tags.

Vite::useStyleTagAttributes() — Method in class Vite

Use the given callback to resolve attributes for style tags.

Vite::usePreloadTagAttributes() — Method in class Vite

Use the given callback to resolve attributes for preload tags.

DeterminesStatusCode::unauthorized() — Method in class DeterminesStatusCode

Determine if the response was a 401 "Unauthorized" response.

DeterminesStatusCode::unprocessableEntity() — Method in class DeterminesStatusCode

Determine if the response was a 422 "Unprocessable Entity" response.

$ PendingRequest#urlParametersProperty in class PendingRequest

The parameters that can be substituted into the URL.

Request::url() — Method in class Request

Get the URL of the request.

$ Request#userResolverProperty in class Request

The user resolver callback.

Request::url() — Method in class Request

Get the URL (no query string) for the request.

Request::userAgent() — Method in class Request

Get the client user agent.

Request::user() — Method in class Request

Get the user making the request.

ConditionallyLoadsAttributes::unless() — Method in class ConditionallyLoadsAttributes

Retrieve a value if the given "condition" is falsy.

UploadedFileClass in namespace Illuminate\Http
$ Envelope#usingProperty in class Envelope

The message's Symfony Message customization callbacks.

Envelope::using() — Method in class Envelope

Add a Symfony Message customization callback to the message.

$ Action#urlProperty in class Action

The action URL.

DatabaseNotification::unread() — Method in class DatabaseNotification

Determine if a notification has not been read.

HasDatabaseNotifications::unreadNotifications() — Method in class HasDatabaseNotifications

Get the entity's unread notifications.

AbstractCursorPaginator::url() — Method in class AbstractCursorPaginator

Get the URL for a given cursor.

AbstractPaginator::url() — Method in class AbstractPaginator

Get the URL for a given page number.

AbstractPaginator::useTailwind() — Method in class AbstractPaginator

Indicate that Tailwind styling should be used for generated links.

AbstractPaginator::useBootstrap() — Method in class AbstractPaginator

Indicate that Bootstrap 4 styling should be used for generated links.

AbstractPaginator::useBootstrapThree() — Method in class AbstractPaginator

Indicate that Bootstrap 3 styling should be used for generated links.

AbstractPaginator::useBootstrapFour() — Method in class AbstractPaginator

Indicate that Bootstrap 4 styling should be used for generated links.

AbstractPaginator::useBootstrapFive() — Method in class AbstractPaginator

Indicate that Bootstrap 5 styling should be used for generated links.

UrlWindowClass in namespace Illuminate\Pagination
Job::uuid() — Method in class Job

Get the UUID of the job.

Connection::unsetEventDispatcher() — Method in class Connection

Unset the event dispatcher instance on the connection.

UrlGenerationExceptionClass in namespace Illuminate\Routing\Exceptions
UriValidatorClass in namespace Illuminate\Routing\Matching
$ Route#uriProperty in class Route

The URI pattern the route responds to.

Route::updatePrefixOnAction() — Method in class Route

Update the "prefix" attribute on the action array.

Route::uri() — Method in class Route

Get the URI associated with the route.

Route::uses() — Method in class Route

Set the handler for the route.

$ RouteUri#uriProperty in class RouteUri

The route URI.

$ RouteUrlGenerator#urlProperty in class RouteUrlGenerator

The URL generator instance.

Router::updateGroupStack() — Method in class Router

Update the group stack with the given attributes.

Router::uses() — Method in class Router

Alias for the "currentRouteUses" method.

Router::uniqueMiddleware() — Method in class Router

Remove any duplicate middleware from the given array.

UrlGeneratorClass in namespace Illuminate\Routing
DatabaseSessionHandler::userId() — Method in class DatabaseSessionHandler

Get the currently authenticated user's ID.

DatabaseSessionHandler::userAgent() — Method in class DatabaseSessionHandler

Get the user agent for the current request.

Arr::undot() — Method in class Arr

Convert a flatten "dot" notation array into an expanded array.

Collection::union() — Method in class Collection

Union the collection with the given items.

Collection::undot() — Method in class Collection

Convert a flatten "dot" notation array into an expanded array.

Collection::unique() — Method in class Collection

Return only unique items from the collection array.

DateFactory::use() — Method in class DateFactory

Use the given handler when generating dates (class name, callable, or factory).

DateFactory::useDefault() — Method in class DateFactory

Use the default date class when generating dates.

DateFactory::useCallable() — Method in class DateFactory

Execute the given callable on each date creation.

DateFactory::useClass() — Method in class DateFactory

Use the given date type (class) when generating dates.

DateFactory::useFactory() — Method in class DateFactory

Use the given Carbon factory when generating dates.

DateFactory::useMonthsOverflow() — Method in class DateFactory
DateFactory::useStrictMode() — Method in class DateFactory
DateFactory::useYearsOverflow() — Method in class DateFactory
Enumerable::unwrap() — Method in class Enumerable
Enumerable::unless() — Method in class Enumerable

Apply the callback if the given "value" is (or resolves to) truthy.

Enumerable::unlessEmpty() — Method in class Enumerable

Apply the callback unless the collection is empty.

Enumerable::unlessNotEmpty() — Method in class Enumerable

Apply the callback unless the collection is not empty.

Enumerable::union() — Method in class Enumerable

Union the collection with the given items.

Enumerable::undot() — Method in class Enumerable

Convert a flatten "dot" notation array into an expanded array.

Enumerable::unique() — Method in class Enumerable

Return only unique items from the collection array.

Enumerable::uniqueStrict() — Method in class Enumerable

Return only unique items from the collection array using strict comparison.

App::useAppPath() — Method in class App
App::useBootstrapPath() — Method in class App
App::useConfigPath() — Method in class App
App::useDatabasePath() — Method in class App
App::useLangPath() — Method in class App
App::usePublicPath() — Method in class App
App::useStoragePath() — Method in class App
App::useEnvironmentPath() — Method in class App
Auth::userResolver() — Method in class Auth
Auth::user() — Method in class Auth
Broadcast::userRoutes() — Method in class Broadcast
Cookie::unqueue() — Method in class Cookie
DB::usingConnection() — Method in class DB
DB::useDefaultQueryGrammar() — Method in class DB
DB::useDefaultSchemaGrammar() — Method in class DB
DB::useDefaultPostProcessor() — Method in class DB
DB::update() — Method in class DB
DB::unprepared() — Method in class DB
DB::useWriteConnectionWhenReading() — Method in class DB
DB::usingNativeSchemaOperations() — Method in class DB
DB::unsetEventDispatcher() — Method in class DB
DB::unsetTransactionManager() — Method in class DB
Date::use() — Method in class Date
Date::useDefault() — Method in class Date
Date::useCallable() — Method in class Date
Date::useClass() — Method in class Date
Date::useFactory() — Method in class Date
Date::useMonthsOverflow() — Method in class Date
Date::useStrictMode() — Method in class Date
Date::useYearsOverflow() — Method in class Date
Event::until() — Method in class Event
File::unless() — Method in class File
Http::unless() — Method in class Http
Log::unless() — Method in class Log
Redis::unsetEventDispatcher() — Method in class Redis
Request::url() — Method in class Request
Request::userAgent() — Method in class Request
Request::user() — Method in class Request
Route::uses() — Method in class Route
Route::uniqueMiddleware() — Method in class Route
Schema::useNativeSchemaOperationsIfPossible() — Method in class Schema
Storage::url() — Method in class Storage
Storage::unless() — Method in class Storage
URLClass in namespace Illuminate\Support\Facades
Vite::useCspNonce() — Method in class Vite
Vite::useIntegrityKey() — Method in class Vite
Vite::useManifestFilename() — Method in class Vite
Vite::useHotFile() — Method in class Vite
Vite::useBuildDirectory() — Method in class Vite
Vite::useScriptTagAttributes() — Method in class Vite
Vite::useStyleTagAttributes() — Method in class Vite
Vite::usePreloadTagAttributes() — Method in class Vite
LazyCollection::union() — Method in class LazyCollection

Union the collection with the given items.

LazyCollection::undot() — Method in class LazyCollection

Convert a flatten "dot" notation array into an expanded array.

LazyCollection::unique() — Method in class LazyCollection

Return only unique items from the collection array.

MessageBag::unique() — Method in class MessageBag

Get all of the unique messages for every key in the message bag.

$ Pluralizer#uncountableProperty in class Pluralizer

Uncountable non-nouns word forms.

Pluralizer::uncountable() — Method in class Pluralizer

Determine if the given value is uncountable.

Pluralizer::useLanguage() — Method in class Pluralizer

Specify the language that should be used by the inflector.

$ Str#uuidFactoryProperty in class Str

The callback that should be used to generate UUIDs.

Str::upper() — Method in class Str

Convert the given string to upper-case.

Str::ucfirst() — Method in class Str

Make a string's first character uppercase.

Str::ucsplit() — Method in class Str

Split a string into pieces by uppercase characters.

Str::uuid() — Method in class Str

Generate a UUID (version 4).

Str::ulid() — Method in class Str

Generate a ULID.

Stringable::upper() — Method in class Stringable

Convert the given string to upper-case.

Stringable::ucfirst() — Method in class Stringable

Make a string's first character uppercase.

Stringable::ucsplit() — Method in class Stringable

Split a string by uppercase characters.

EventFake::until() — Method in class EventFake

Dispatch an event and call the listeners.

Timebox::usleep() — Method in class Timebox

Sleep for the specified number of microseconds.

Conditionable::unless() — Method in class Conditionable

Apply the callback if the given "value" is (or resolves to) falsy.

$ EnumeratesValues#uniqueProperty in class EnumeratesValues
$ EnumeratesValues#unlessProperty in class EnumeratesValues
$ EnumeratesValues#untilProperty in class EnumeratesValues
EnumeratesValues::unwrap() — Method in class EnumeratesValues
EnumeratesValues::unlessEmpty() — Method in class EnumeratesValues

Apply the callback unless the collection is empty.

EnumeratesValues::unlessNotEmpty() — Method in class EnumeratesValues

Apply the callback unless the collection is not empty.

EnumeratesValues::unique() — Method in class EnumeratesValues

Return only unique items from the collection array.

EnumeratesValues::uniqueStrict() — Method in class EnumeratesValues

Return only unique items from the collection array using strict comparison.

EnumeratesValues::useAsCallable() — Method in class EnumeratesValues

Determine if the given value is callable, but not a string.

TestDatabases::usingDatabase() — Method in class TestDatabases

Runs the given callable using the given database.

$ PendingCommand#unexpectedExitCodeProperty in class PendingCommand

The unexpected exit code.

FilterEmailValidation::unicode() — Method in class FilterEmailValidation

Create a new instance which allows any unicode characters in local-part.

Rule::unique() — Method in class Rule

Get a unique constraint builder instance.

$ DatabaseRule#usingProperty in class DatabaseRule

The array of custom query callbacks.

DatabaseRule::using() — Method in class DatabaseRule

Register a custom query callback.

$ Password#uncompromisedProperty in class Password

If the password should not have been compromised in data leaks.

Password::uncompromised() — Method in class Password

Ensures the password has not been compromised in data leaks.

UniqueClass in namespace Illuminate\Validation\Rules
UnauthorizedExceptionClass in namespace Illuminate\Validation

V

AuthManager::viaRequest() — Method in class AuthManager

Register a new callback based request guard.

DatabaseUserProvider::validateCredentials() — Method in class DatabaseUserProvider

Validate a user against the given credentials.

EloquentUserProvider::validateCredentials() — Method in class EloquentUserProvider

Validate a user against the given credentials.

ValidatedClass in namespace Illuminate\Auth\Events
VerifiedClass in namespace Illuminate\Auth\Events
ResetPassword::via() — Method in class ResetPassword

Get the notification's channels.

VerifyEmailClass in namespace Illuminate\Auth\Notifications
VerifyEmail::via() — Method in class VerifyEmail

Get the notification's channels.

VerifyEmail::verificationUrl() — Method in class VerifyEmail

Get the verification URL for the given notifiable.

PasswordBroker::validateReset() — Method in class PasswordBroker

Validate a password reset for the given credentials.

Recaller::valid() — Method in class Recaller

Determine if the recaller is valid.

RequestGuard::validate() — Method in class RequestGuard

Validate a user's credentials.

$ SessionGuard#viaRememberProperty in class SessionGuard

Indicates if the user was authenticated via a recaller cookie.

SessionGuard::validate() — Method in class SessionGuard

Validate a user's credentials.

SessionGuard::viaRemember() — Method in class SessionGuard

Determine if the user was authenticated via "remember me" cookie.

TokenGuard::validate() — Method in class TokenGuard

Validate a user's credentials.

AblyBroadcaster::validAuthenticationResponse() — Method in class AblyBroadcaster

Return the valid authentication response.

Broadcaster::verifyUserCanAccessChannel() — Method in class Broadcaster

Authenticate the incoming request for a given channel.

LogBroadcaster::validAuthenticationResponse() — Method in class LogBroadcaster

Return the valid authentication response.

NullBroadcaster::validAuthenticationResponse() — Method in class NullBroadcaster

Return the valid authentication response.

PusherBroadcaster::validAuthenticationResponse() — Method in class PusherBroadcaster

Return the valid authentication response.

RedisBroadcaster::validAuthenticationResponse() — Method in class RedisBroadcaster

Return the valid authentication response.

PendingBroadcast::via() — Method in class PendingBroadcast

Broadcast the event using a specific broadcaster.

$ DynamoDbStore#valueAttributeProperty in class DynamoDbStore

The name of the attribute that should hold the value.

$ CacheHit#valueProperty in class CacheHit

The value that was retrieved.

$ KeyWritten#valueProperty in class KeyWritten

The value that was written.

$ InteractsWithIO#verbosityProperty in class InteractsWithIO

The default verbosity of output commands.

$ InteractsWithIO#verbosityMapProperty in class InteractsWithIO

The mapping between human readable verbosity levels and Symfony's OutputInterface.

GeneratorCommand::viewPath() — Method in class GeneratorCommand

Get the first view directory path from the application configuration.

Guard::validate() — Method in class Guard

Validate a user's credentials.

StatefulGuard::viaRemember() — Method in class StatefulGuard

Determine if the user was authenticated via "remember me" cookie.

UserProvider::validateCredentials() — Method in class UserProvider

Validate a user against the given credentials.

Broadcaster::validAuthenticationResponse() — Method in class Broadcaster

Return the valid authentication response.

Application::version() — Method in class Application

Get the version number of the application.

Pipeline::via() — Method in class Pipeline

Set the method to call on the stops.

ResponseFactory::view() — Method in class ResponseFactory

Create a new response for a given view.

ValidatedDataClass in namespace Illuminate\Contracts\Support
UncompromisedVerifier::verify() — Method in class UncompromisedVerifier

Verify that the given data has not been compromised in data leaks.

ValidatesWhenResolvedClass in namespace Illuminate\Contracts\Validation
ValidatesWhenResolved::validateResolved() — Method in class ValidatesWhenResolved

Validate the given class instance.

ValidationRuleClass in namespace Illuminate\Contracts\Validation
ValidationRule::validate() — Method in class ValidationRule

Run the validation rule.

ValidatorClass in namespace Illuminate\Contracts\Validation
Validator::validate() — Method in class Validator

Run the validator's rules against its data.

Validator::validated() — Method in class Validator

Get the attributes and values that were validated.

ValidatorAwareRuleClass in namespace Illuminate\Contracts\Validation
ViewClass in namespace Illuminate\Contracts\View
ViewCompilationExceptionClass in namespace Illuminate\Contracts\View
CookieValuePrefix::validate() — Method in class CookieValuePrefix

Validate a cookie value contains a valid prefix. If it does, return the cookie value with the prefix removed. Otherwise, return null.

EncryptCookies::validateValue() — Method in class EncryptCookies

Validate and remove the cookie value prefix from the value.

EncryptCookies::validateArray() — Method in class EncryptCookies

Validate and remove the cookie value prefix from all values of an array.

Builder::value() — Method in class Builder

Get a single column's value from the first result of a query.

Builder::valueOrFail() — Method in class Builder

Get a single column's value from the first result of the query or throw an exception.

$ HidesAttributes#visibleProperty in class HidesAttributes

The attributes that should be visible in serialization.

Builder::value() — Method in class Builder

Get a single column's value from the first result of a query.

$ Expression#valueProperty in class Expression

The value of the expression.

PostgresGrammar::validFullTextLanguages() — Method in class PostgresGrammar

Get an array of valid full text languages.

ColumnDefinition::virtualAs() — Method in class ColumnDefinition
Encrypter::validPayload() — Method in class Encrypter

Verify that the encryption payload is valid.

Encrypter::validMac() — Method in class Encrypter

Determine if the MAC for the given payload is valid.

Application::version() — Method in class Application

Get the version number of the application.

Application::viewPath() — Method in class Application

Get the path to the views directory.

$ DocsCommand#versionProperty in class DocsCommand

The custom documentation version to open.

DocsCommand::version() — Method in class DocsCommand

Determine the version of the docs to open.

$ RouteListCommand#verbColorsProperty in class RouteListCommand

The verb colors for the command.

VendorPublishCommandClass in namespace Illuminate\Foundation\Console
ViewCacheCommandClass in namespace Illuminate\Foundation\Console
ViewClearCommandClass in namespace Illuminate\Foundation\Console
VendorTagPublishedClass in namespace Illuminate\Foundation\Events
$ FormRequest#validatorProperty in class FormRequest

The validator instance.

FormRequest::validationData() — Method in class FormRequest

Get data to be validated from the request.

FormRequest::validated() — Method in class FormRequest

Get the validated data from the request.

ValidatePostSizeClass in namespace Illuminate\Foundation\Http\Middleware
VerifyCsrfTokenClass in namespace Illuminate\Foundation\Http\Middleware
$ PackageManifest#vendorPathProperty in class PackageManifest

The vendor path.

InteractsWithViews::view() — Method in class InteractsWithViews

Create a new TestView from the given view.

$ Wormhole#valueProperty in class Wormhole

The amount of time to travel.

ValidatesRequestsClass in namespace Illuminate\Foundation\Validation
ValidatesRequests::validateWith() — Method in class ValidatesRequests

Run the validation routine against the given validator.

ValidatesRequests::validate() — Method in class ValidatesRequests

Validate the given request with the given rules.

ValidatesRequests::validateWithBag() — Method in class ValidatesRequests

Validate the given request with the given rules.

ViteClass in namespace Illuminate\Foundation
$ ArgonHasher#verifyAlgorithmProperty in class ArgonHasher

Indicates whether to perform an algorithm check.

$ BcryptHasher#verifyAlgorithmProperty in class BcryptHasher

Indicates whether to perform an algorithm check.

Request::validate() — Method in class Request
Request::validateWithBag() — Method in class Request
$ Mailable#viewProperty in class Mailable

The view to use for the message.

$ Mailable#viewDataProperty in class Mailable

The view data for the message.

$ Mailable#viewDataCallbackProperty in class Mailable

The callback that should be invoked while building the view data.

Mailable::view() — Method in class Mailable

Set the view and view data for the message.

$ Content#viewProperty in class Content

The Blade view that should be rendered for the mailable.

Content::view() — Method in class Content

Set the view for the message.

$ Mailer#viewsProperty in class Mailer

The view factory instance.

$ Markdown#viewProperty in class Markdown

The view factory implementation.

$ MailMessage#viewProperty in class MailMessage

The view to be rendered.

$ MailMessage#viewDataProperty in class MailMessage

The view data for the message.

MailMessage::view() — Method in class MailMessage

Set the view for the mail message.

AbstractCursorPaginator::viewFactory() — Method in class AbstractCursorPaginator

Get an instance of the view factory from the resolver.

$ AbstractPaginator#viewFactoryResolverProperty in class AbstractPaginator

The view factory resolver callback.

AbstractPaginator::viewFactory() — Method in class AbstractPaginator

Get an instance of the view factory from the resolver.

AbstractPaginator::viewFactoryResolver() — Method in class AbstractPaginator

Set the view factory resolver callback.

Pipeline::via() — Method in class Pipeline

Set the method to call on the pipes.

ValidatorInterfaceClass in namespace Illuminate\Routing\Matching
ValidateSignatureClass in namespace Illuminate\Routing\Middleware
$ ResourceRegistrar#verbsProperty in class ResourceRegistrar

The verbs used in the resource URIs.

ResourceRegistrar::verbs() — Method in class ResourceRegistrar

Get or set the action verbs used in the resource URIs.

$ ResponseFactory#viewProperty in class ResponseFactory

The view factory instance.

ResponseFactory::view() — Method in class ResponseFactory

Create a new response for a given view.

$ Route#validatorsProperty in class Route

The validators used by the routes.

$ Router#verbsProperty in class Router

All of the verbs supported by the router.

Router::view() — Method in class Router

Register a new route that returns a view.

ViewControllerClass in namespace Illuminate\Routing
Collection::values() — Method in class Collection
Enumerable::values() — Method in class Enumerable
App::version() — Method in class App
App::viewPath() — Method in class App
Auth::viaRequest() — Method in class Auth
Auth::validate() — Method in class Auth
Auth::viaRemember() — Method in class Auth
Broadcast::validAuthenticationResponse() — Method in class Broadcast
Pipeline::via() — Method in class Pipeline
Request::validate() — Method in class Request
Request::validateWithBag() — Method in class Request
Response::view() — Method in class Response
Route::view() — Method in class Route
Storage::visibility() — Method in class Storage
ValidatorClass in namespace Illuminate\Support\Facades
Validator::validate() — Method in class Validator
ViewClass in namespace Illuminate\Support\Facades
ViteClass in namespace Illuminate\Support\Facades
LazyCollection::values() — Method in class LazyCollection
$ Optional#valueProperty in class Optional

The underlying object.

$ Stringable#valueProperty in class Stringable

The underlying string value.

Stringable::value() — Method in class Stringable

Get the underlying string value.

EnumeratesValues::value() — Method in class EnumeratesValues
EnumeratesValues::valueRetriever() — Method in class EnumeratesValues

Get a value retrieving callback.

ValidatedInputClass in namespace Illuminate\Support
ViewErrorBagClass in namespace Illuminate\Support
PendingCommand::verifyExpectations() — Method in class PendingCommand

Determine if expected questions / choices / outputs are fulfilled.

TestResponse::viewData() — Method in class TestResponse

Get a piece of data from the original view.

$ TestView#viewProperty in class TestView

The original view.

$ ClosureValidationRule#validatorProperty in class ClosureValidationRule

The current validator.

ValidatesAttributesClass in namespace Illuminate\Validation\Concerns
ValidatesAttributes::validateAccepted() — Method in class ValidatesAttributes

Validate that an attribute was "accepted".

ValidatesAttributes::validateAcceptedIf() — Method in class ValidatesAttributes

Validate that an attribute was "accepted" when another attribute has a given value.

ValidatesAttributes::validateDeclined() — Method in class ValidatesAttributes

Validate that an attribute was "declined".

ValidatesAttributes::validateDeclinedIf() — Method in class ValidatesAttributes

Validate that an attribute was "declined" when another attribute has a given value.

ValidatesAttributes::validateActiveUrl() — Method in class ValidatesAttributes

Validate that an attribute is an active URL.

ValidatesAttributes::validateAscii() — Method in class ValidatesAttributes

Validate that an attribute is 7 bit ASCII.

ValidatesAttributes::validateBail() — Method in class ValidatesAttributes

"Break" on first validation fail.

ValidatesAttributes::validateBefore() — Method in class ValidatesAttributes

Validate the date is before a given date.

ValidatesAttributes::validateBeforeOrEqual() — Method in class ValidatesAttributes

Validate the date is before or equal a given date.

ValidatesAttributes::validateAfter() — Method in class ValidatesAttributes

Validate the date is after a given date.

ValidatesAttributes::validateAfterOrEqual() — Method in class ValidatesAttributes

Validate the date is equal or after a given date.

ValidatesAttributes::validateAlpha() — Method in class ValidatesAttributes

Validate that an attribute contains only alphabetic characters.

ValidatesAttributes::validateAlphaDash() — Method in class ValidatesAttributes

Validate that an attribute contains only alpha-numeric characters, dashes, and underscores.

ValidatesAttributes::validateAlphaNum() — Method in class ValidatesAttributes

Validate that an attribute contains only alpha-numeric characters.

ValidatesAttributes::validateArray() — Method in class ValidatesAttributes

Validate that an attribute is an array.

ValidatesAttributes::validateRequiredArrayKeys() — Method in class ValidatesAttributes

Validate that an array has all of the given keys.

ValidatesAttributes::validateBetween() — Method in class ValidatesAttributes

Validate the size of an attribute is between a set of values.

ValidatesAttributes::validateBoolean() — Method in class ValidatesAttributes

Validate that an attribute is a boolean.

ValidatesAttributes::validateConfirmed() — Method in class ValidatesAttributes

Validate that an attribute has a matching confirmation.

ValidatesAttributes::validateCurrentPassword() — Method in class ValidatesAttributes

Validate that the password of the currently authenticated user matches the given value.

ValidatesAttributes::validateDate() — Method in class ValidatesAttributes

Validate that an attribute is a valid date.

ValidatesAttributes::validateDateFormat() — Method in class ValidatesAttributes

Validate that an attribute matches a date format.

ValidatesAttributes::validateDateEquals() — Method in class ValidatesAttributes

Validate that an attribute is equal to another date.

ValidatesAttributes::validateDecimal() — Method in class ValidatesAttributes

Validate that an attribute has a given number of decimal places.

ValidatesAttributes::validateDifferent() — Method in class ValidatesAttributes

Validate that an attribute is different from another attribute.

ValidatesAttributes::validateDigits() — Method in class ValidatesAttributes

Validate that an attribute has a given number of digits.

ValidatesAttributes::validateDigitsBetween() — Method in class ValidatesAttributes

Validate that an attribute is between a given number of digits.

ValidatesAttributes::validateDimensions() — Method in class ValidatesAttributes

Validate the dimensions of an image matches the given values.

ValidatesAttributes::validateDistinct() — Method in class ValidatesAttributes

Validate an attribute is unique among other values.

ValidatesAttributes::validateEmail() — Method in class ValidatesAttributes

Validate that an attribute is a valid e-mail address.

ValidatesAttributes::validateExists() — Method in class ValidatesAttributes

Validate the existence of an attribute value in a database table.

ValidatesAttributes::validateUnique() — Method in class ValidatesAttributes

Validate the uniqueness of an attribute value on a given database table.

ValidatesAttributes::validateFile() — Method in class ValidatesAttributes

Validate the given value is a valid file.

ValidatesAttributes::validateFilled() — Method in class ValidatesAttributes

Validate the given attribute is filled if it is present.

ValidatesAttributes::validateGt() — Method in class ValidatesAttributes

Validate that an attribute is greater than another attribute.

ValidatesAttributes::validateLt() — Method in class ValidatesAttributes

Validate that an attribute is less than another attribute.

ValidatesAttributes::validateGte() — Method in class ValidatesAttributes

Validate that an attribute is greater than or equal another attribute.

ValidatesAttributes::validateLte() — Method in class ValidatesAttributes

Validate that an attribute is less than or equal another attribute.

ValidatesAttributes::validateLowercase() — Method in class ValidatesAttributes

Validate that an attribute is lowercase.

ValidatesAttributes::validateUppercase() — Method in class ValidatesAttributes

Validate that an attribute is uppercase.

ValidatesAttributes::validateImage() — Method in class ValidatesAttributes

Validate the MIME type of a file is an image MIME type.

ValidatesAttributes::validateIn() — Method in class ValidatesAttributes

Validate an attribute is contained within a list of values.

ValidatesAttributes::validateInArray() — Method in class ValidatesAttributes

Validate that the values of an attribute are in another attribute.

ValidatesAttributes::validateInteger() — Method in class ValidatesAttributes

Validate that an attribute is an integer.

ValidatesAttributes::validateIp() — Method in class ValidatesAttributes

Validate that an attribute is a valid IP.

ValidatesAttributes::validateIpv4() — Method in class ValidatesAttributes

Validate that an attribute is a valid IPv4.

ValidatesAttributes::validateIpv6() — Method in class ValidatesAttributes

Validate that an attribute is a valid IPv6.

ValidatesAttributes::validateMacAddress() — Method in class ValidatesAttributes

Validate that an attribute is a valid MAC address.

ValidatesAttributes::validateJson() — Method in class ValidatesAttributes

Validate the attribute is a valid JSON string.

ValidatesAttributes::validateMax() — Method in class ValidatesAttributes

Validate the size of an attribute is less than a maximum value.

ValidatesAttributes::validateMaxDigits() — Method in class ValidatesAttributes

Validate that an attribute has a maximum number of digits.

ValidatesAttributes::validateMimes() — Method in class ValidatesAttributes

Validate the guessed extension of a file upload is in a set of file extensions.

ValidatesAttributes::validateMimetypes() — Method in class ValidatesAttributes

Validate the MIME type of a file upload attribute is in a set of MIME types.

ValidatesAttributes::validateMin() — Method in class ValidatesAttributes

Validate the size of an attribute is greater than a minimum value.

ValidatesAttributes::validateMinDigits() — Method in class ValidatesAttributes

Validate that an attribute has a minimum number of digits.

ValidatesAttributes::validateMissing() — Method in class ValidatesAttributes

Validate that an attribute is missing.

ValidatesAttributes::validateMissingIf() — Method in class ValidatesAttributes

Validate that an attribute is missing when another attribute has a given value.

ValidatesAttributes::validateMissingUnless() — Method in class ValidatesAttributes

Validate that an attribute is missing unless another attribute has a given value.

ValidatesAttributes::validateMissingWith() — Method in class ValidatesAttributes

Validate that an attribute is missing when any given attribute is present.

ValidatesAttributes::validateMissingWithAll() — Method in class ValidatesAttributes

Validate that an attribute is missing when all given attributes are present.

ValidatesAttributes::validateMultipleOf() — Method in class ValidatesAttributes

Validate the value of an attribute is a multiple of a given value.

ValidatesAttributes::validateNullable() — Method in class ValidatesAttributes

"Indicate" validation should pass if value is null.

ValidatesAttributes::validateNotIn() — Method in class ValidatesAttributes

Validate an attribute is not contained within a list of values.

ValidatesAttributes::validateNumeric() — Method in class ValidatesAttributes

Validate that an attribute is numeric.

ValidatesAttributes::validatePresent() — Method in class ValidatesAttributes

Validate that an attribute exists even if not filled.

ValidatesAttributes::validateRegex() — Method in class ValidatesAttributes

Validate that an attribute passes a regular expression check.

ValidatesAttributes::validateNotRegex() — Method in class ValidatesAttributes

Validate that an attribute does not pass a regular expression check.

ValidatesAttributes::validateRequired() — Method in class ValidatesAttributes

Validate that a required attribute exists.

ValidatesAttributes::validateRequiredIf() — Method in class ValidatesAttributes

Validate that an attribute exists when another attribute has a given value.

ValidatesAttributes::validateRequiredIfAccepted() — Method in class ValidatesAttributes

Validate that an attribute exists when another attribute was "accepted".

ValidatesAttributes::validateProhibited() — Method in class ValidatesAttributes

Validate that an attribute does not exist or is an empty string.

ValidatesAttributes::validateProhibitedIf() — Method in class ValidatesAttributes

Validate that an attribute does not exist when another attribute has a given value.

ValidatesAttributes::validateProhibitedUnless() — Method in class ValidatesAttributes

Validate that an attribute does not exist unless another attribute has a given value.

ValidatesAttributes::validateProhibits() — Method in class ValidatesAttributes

Validate that other attributes do not exist when this attribute exists.

ValidatesAttributes::validateExclude() — Method in class ValidatesAttributes

Indicate that an attribute is excluded.

ValidatesAttributes::validateExcludeIf() — Method in class ValidatesAttributes

Indicate that an attribute should be excluded when another attribute has a given value.

ValidatesAttributes::validateExcludeUnless() — Method in class ValidatesAttributes

Indicate that an attribute should be excluded when another attribute does not have a given value.

ValidatesAttributes::validateRequiredUnless() — Method in class ValidatesAttributes

Validate that an attribute exists when another attribute does not have a given value.

ValidatesAttributes::validateExcludeWith() — Method in class ValidatesAttributes

Indicate that an attribute should be excluded when another attribute presents.

ValidatesAttributes::validateExcludeWithout() — Method in class ValidatesAttributes

Indicate that an attribute should be excluded when another attribute is missing.

ValidatesAttributes::validateRequiredWith() — Method in class ValidatesAttributes

Validate that an attribute exists when any other attribute exists.

ValidatesAttributes::validateRequiredWithAll() — Method in class ValidatesAttributes

Validate that an attribute exists when all other attributes exist.

ValidatesAttributes::validateRequiredWithout() — Method in class ValidatesAttributes

Validate that an attribute exists when another attribute does not.

ValidatesAttributes::validateRequiredWithoutAll() — Method in class ValidatesAttributes

Validate that an attribute exists when all other attributes do not.

ValidatesAttributes::validateSame() — Method in class ValidatesAttributes

Validate that two attributes match.

ValidatesAttributes::validateSize() — Method in class ValidatesAttributes

Validate the size of an attribute.

ValidatesAttributes::validateSometimes() — Method in class ValidatesAttributes

"Validate" optional attributes.

ValidatesAttributes::validateStartsWith() — Method in class ValidatesAttributes

Validate the attribute starts with a given substring.

ValidatesAttributes::validateDoesntStartWith() — Method in class ValidatesAttributes

Validate the attribute does not start with a given substring.

ValidatesAttributes::validateEndsWith() — Method in class ValidatesAttributes

Validate the attribute ends with a given substring.

ValidatesAttributes::validateDoesntEndWith() — Method in class ValidatesAttributes

Validate the attribute does not end with a given substring.

ValidatesAttributes::validateString() — Method in class ValidatesAttributes

Validate that an attribute is a string.

ValidatesAttributes::validateTimezone() — Method in class ValidatesAttributes

Validate that an attribute is a valid timezone.

ValidatesAttributes::validateUrl() — Method in class ValidatesAttributes

Validate that an attribute is a valid URL.

ValidatesAttributes::validateUlid() — Method in class ValidatesAttributes

Validate that an attribute is a valid ULID.

ValidatesAttributes::validateUuid() — Method in class ValidatesAttributes

Validate that an attribute is a valid UUID.

$ Factory#verifierProperty in class Factory

The Presence Verifier implementation.

Factory::validate() — Method in class Factory

Validate the given data against the provided rules.

$ InvokableValidationRule#validatorProperty in class InvokableValidationRule

The current validator.

NotPwnedVerifier::verify() — Method in class NotPwnedVerifier

Verify that the given data has not been compromised in public breaches.

$ File#validatorProperty in class File

The validator performing the validation.

$ In#valuesProperty in class In

The accepted values.

$ NotIn#valuesProperty in class NotIn

The accepted values.

$ Password#validatorProperty in class Password

The validator performing the validation.

ValidatesWhenResolvedTraitClass in namespace Illuminate\Validation

Provides default implementation of ValidatesWhenResolved contract.

ValidatesWhenResolvedTrait::validateResolved() — Method in class ValidatesWhenResolvedTrait

Validate the class instance.

ValidationDataClass in namespace Illuminate\Validation
ValidationExceptionClass in namespace Illuminate\Validation
$ ValidationException#validatorProperty in class ValidationException

The validator instance.

ValidationRuleParserClass in namespace Illuminate\Validation
ValidationServiceProviderClass in namespace Illuminate\Validation
ValidatorClass in namespace Illuminate\Validation
Validator::validate() — Method in class Validator

Run the validator's rules against its data.

Validator::validateWithBag() — Method in class Validator

Run the validator's rules against its data.

Validator::validated() — Method in class Validator

Get the attributes and values that were validated.

Validator::validateAttribute() — Method in class Validator

Validate a given attribute against a rule.

Validator::validateUsingCustomRule() — Method in class Validator

Validate an attribute using a custom rule object.

Validator::valid() — Method in class Validator

Returns the data which was valid.

$ AnonymousComponent#viewProperty in class AnonymousComponent

The component view.

$ AppendableAttributeValue#valueProperty in class AppendableAttributeValue

The attribute value.

Component::view() — Method in class Component

Get the evaluated view contents for the given view.

Factory::viewInstance() — Method in class Factory

Create a new view instance from the given arguments.

$ FileViewFinder#viewsProperty in class FileViewFinder

The array of views that have been located.

$ ShareErrorsFromSession#viewProperty in class ShareErrorsFromSession

The view factory implementation.

ViewClass in namespace Illuminate\View
$ View#viewProperty in class View

The name of the view.

ViewExceptionClass in namespace Illuminate\View
ViewFinderInterfaceClass in namespace Illuminate\View
ViewNameClass in namespace Illuminate\View
ViewServiceProviderClass in namespace Illuminate\View

W

AuthorizationException::withStatus() — Method in class AuthorizationException

Set the HTTP response status code.

Response::withStatus() — Method in class Response

Set the HTTP response status code.

EloquentUserProvider::withQuery() — Method in class EloquentUserProvider

Sets the callback to modify the query before retrieving users.

Batchable::withBatchId() — Method in class Batchable

Set the batch ID on the job.

Batchable::withFakeBatch() — Method in class Batchable

Indicate that the job should use a fake batch.

PendingBatch::withOption() — Method in class PendingBatch

Add additional data into the batch's options array.

InteractsWithIO::withProgressBar() — Method in class InteractsWithIO

Execute a given callback while advancing a progress bar.

InteractsWithIO::warn() — Method in class InteractsWithIO

Write a string as warning output.

OutputStyle::write() — Method in class OutputStyle
{@inheritdoc}
OutputStyle::writeln() — Method in class OutputStyle
{@inheritdoc}
QuestionHelper::writePrompt() — Method in class QuestionHelper
{@inheritdoc}
CallbackEvent::withoutOverlapping() — Method in class CallbackEvent

Do not allow the event to overlap each other.

$ Event#withoutOverlappingProperty in class Event

Indicates if the command should not overlap itself.

Event::withoutOverlapping() — Method in class Event

Do not allow the event to overlap each other.

Event::when() — Method in class Event

Register a callback to further filter the schedule.

Event::withOutputCallback() — Method in class Event

Get a callback that provides output.

ManagesFrequencies::weekdays() — Method in class ManagesFrequencies

Schedule the event to run only on weekdays.

ManagesFrequencies::weekends() — Method in class ManagesFrequencies

Schedule the event to run only on weekends.

ManagesFrequencies::wednesdays() — Method in class ManagesFrequencies

Schedule the event to run only on Wednesdays.

ManagesFrequencies::weekly() — Method in class ManagesFrequencies

Schedule the event to run weekly.

ManagesFrequencies::weeklyOn() — Method in class ManagesFrequencies

Schedule the event to run weekly on a given day and time.

Signals::whenAvailable() — Method in class Signals

Execute the given callback if "signals" should be used and are available.

Factory::warn() — Method in class Factory
WarnClass in namespace Illuminate\Console\View\Components
$ Container#withProperty in class Container

The parameter override stack.

Container::when() — Method in class Container

Define a contextual binding.

Container::wrap() — Method in class Container

Wrap the given closure such that its dependencies will be injected when executed.

Container::when() — Method in class Container

Define a contextual binding.

Filesystem::writeStream() — Method in class Filesystem

Write a new file using a stream.

CursorPaginator::withQueryString() — Method in class CursorPaginator

Add all current query string values to the paginator.

InvokedProcess::wait() — Method in class InvokedProcess

Wait for the process to finish.

View::with() — Method in class View

Add a piece of data to the view.

CompilesJsonPaths::wrapJsonFieldAndPath() — Method in class CompilesJsonPaths

Split the given JSON selector into the field and the optional path and wrap them separately.

CompilesJsonPaths::wrapJsonPath() — Method in class CompilesJsonPaths

Wrap the given JSON path.

CompilesJsonPaths::wrapJsonPathSegment() — Method in class CompilesJsonPaths

Wrap the given JSON path segment.

Connection::withFreshQueryLog() — Method in class Connection

Execute the given callback in "dry run" mode.

Connection::whenQueryingForLongerThan() — Method in class Connection

Register a callback to be invoked when the connection queries for longer than a given amount of time.

Connection::withTablePrefix() — Method in class Connection

Set the table prefix and return the grammar.

MigrateMakeCommand::writeMigration() — Method in class MigrateMakeCommand

Write the migration file to disk.

WithoutModelEventsClass in namespace Illuminate\Database\Console\Seeds
WithoutModelEvents::withoutModelEvents() — Method in class WithoutModelEvents

Prevent model events from being dispatched by the given callback.

WipeCommandClass in namespace Illuminate\Database\Console
$ Builder#whereNotProperty in class Builder
Builder::withGlobalScope() — Method in class Builder

Register a new global scope.

Builder::withoutGlobalScope() — Method in class Builder

Remove a registered global scope.

Builder::withoutGlobalScopes() — Method in class Builder

Remove all or passed registered global scopes.

Builder::whereKey() — Method in class Builder

Add a where clause on the primary key to the query.

Builder::whereKeyNot() — Method in class Builder

Add a where clause on the primary key to the query.

Builder::where() — Method in class Builder

Add a basic where clause to the query.

Builder::whereNot() — Method in class Builder

Add a basic "where not" clause to the query.

Builder::with() — Method in class Builder

Set the relationships that should be eager loaded.

Builder::without() — Method in class Builder

Prevent the specified relations from being eager loaded.

Builder::withOnly() — Method in class Builder

Set the relationships that should be eager loaded while removing any previously added eager loading specifications.

Builder::withCasts() — Method in class Builder

Apply query-time casts to the model instance.

Builder::withoutEagerLoad() — Method in class Builder

Indicate that the given relationships should not be eagerly loaded.

Builder::withoutEagerLoads() — Method in class Builder

Flush the relationships being eagerly loaded.

$ Attribute#withCachingProperty in class Attribute

Indicates if caching is enabled for this attribute.

$ Attribute#withObjectCachingProperty in class Attribute

Indicates if caching of objects is enabled for this attribute.

Attribute::withoutObjectCaching() — Method in class Attribute

Disable object caching for the attribute.

HasAttributes::wasChanged() — Method in class HasAttributes

Determine if the model or any of the given attribute(s) were changed when the model was last saved.

HasEvents::withoutEvents() — Method in class HasEvents

Execute a callback without firing any model events for any model type.

HasRelationships::withoutRelations() — Method in class HasRelationships

Duplicate the instance and unset all the loaded relations.

HasTimestamps::withoutTimestamps() — Method in class HasTimestamps

Disable timestamps for the current class during the given callback scope.

HasTimestamps::withoutTimestampsOn() — Method in class HasTimestamps

Disable timestamps for the given model classes during the given callback scope.

QueriesRelationships::whereHas() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query with where clauses.

QueriesRelationships::withWhereHas() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query with where clauses.

QueriesRelationships::whereDoesntHave() — Method in class QueriesRelationships

Add a relationship count / exists condition to the query with where clauses.

QueriesRelationships::whereHasMorph() — Method in class QueriesRelationships

Add a polymorphic relationship count / exists condition to the query with where clauses.

QueriesRelationships::whereDoesntHaveMorph() — Method in class QueriesRelationships

Add a polymorphic relationship count / exists condition to the query with where clauses.

QueriesRelationships::whereRelation() — Method in class QueriesRelationships

Add a basic where clause to a relationship query.

QueriesRelationships::whereMorphRelation() — Method in class QueriesRelationships

Add a polymorphic relationship condition to the query with a where clause.

QueriesRelationships::whereMorphedTo() — Method in class QueriesRelationships

Add a morph-to relationship condition to the query.

QueriesRelationships::whereNotMorphedTo() — Method in class QueriesRelationships

Add a not morph-to relationship condition to the query.

QueriesRelationships::whereBelongsTo() — Method in class QueriesRelationships

Add a "belongs to" relationship where clause to the query.

QueriesRelationships::withAggregate() — Method in class QueriesRelationships

Add subselect queries to include an aggregate value for a relationship.

QueriesRelationships::withCount() — Method in class QueriesRelationships

Add subselect queries to count the relations.

QueriesRelationships::withMax() — Method in class QueriesRelationships

Add subselect queries to include the max of the relation's column.

QueriesRelationships::withMin() — Method in class QueriesRelationships

Add subselect queries to include the min of the relation's column.

QueriesRelationships::withSum() — Method in class QueriesRelationships

Add subselect queries to include the sum of the relation's column.

QueriesRelationships::withAvg() — Method in class QueriesRelationships

Add subselect queries to include the average of the relation's column.

QueriesRelationships::withExists() — Method in class QueriesRelationships

Add subselect queries to include the existence of related models.

Factory::withFaker() — Method in class Factory

Get a new Faker instance.

$ Model#withProperty in class Model

The relations to eager load on every query.

$ Model#withCountProperty in class Model

The relationship counts that should be eager loaded on every query.

$ Model#wasRecentlyCreatedProperty in class Model

Indicates if the model was inserted during the current request lifecycle.

Model::withoutTouching() — Method in class Model

Disables relationship model touching for the current class during given callback scope.

Model::withoutTouchingOn() — Method in class Model

Disables relationship model touching for the given model classes during given callback scope.

Model::withoutBroadcasting() — Method in class Model

Execute a callback without broadcasting any model events for all model types.

Model::with() — Method in class Model

Begin querying a model with eager loading.

$ BelongsToMany#withTimestampsProperty in class BelongsToMany

Indicates if timestamps are available on the pivot table.

BelongsToMany::wherePivot() — Method in class BelongsToMany

Set a where clause for a pivot table column.

BelongsToMany::wherePivotBetween() — Method in class BelongsToMany

Set a "where between" clause for a pivot table column.

BelongsToMany::wherePivotNotBetween() — Method in class BelongsToMany

Set a "where pivot not between" clause for a pivot table column.

BelongsToMany::wherePivotIn() — Method in class BelongsToMany

Set a "where in" clause for a pivot table column.

BelongsToMany::withPivotValue() — Method in class BelongsToMany

Set a where clause for a pivot table column.

BelongsToMany::wherePivotNotIn() — Method in class BelongsToMany

Set a "where not in" clause for a pivot table column.

BelongsToMany::wherePivotNull() — Method in class BelongsToMany

Set a "where null" clause for a pivot table column.

BelongsToMany::wherePivotNotNull() — Method in class BelongsToMany

Set a "where not null" clause for a pivot table column.

BelongsToMany::withTimestamps() — Method in class BelongsToMany

Specify that the pivot table has creation and update timestamps.

InteractsWithPivotTable::withPivot() — Method in class InteractsWithPivotTable

Set the columns on the pivot table to retrieve.

$ SupportsDefaultModels#withDefaultProperty in class SupportsDefaultModels

Indicates if a default model instance should be used.

SupportsDefaultModels::withDefault() — Method in class SupportsDefaultModels

Return a new model instance in case the relationship does not exist.

HasManyThrough::withTrashedParents() — Method in class HasManyThrough

Indicate that trashed "through" parents should be included in the query.

Relation::whereInEager() — Method in class Relation

Add a whereIn eager constraint for the given set of model keys to be loaded.

Relation::whereInMethod() — Method in class Relation

Get the name of the "where in" method for eager loading.

SoftDeletes::withTrashed() — Method in class SoftDeletes
SoftDeletes::withoutTrashed() — Method in class SoftDeletes
Grammar::wrapArray() — Method in class Grammar

Wrap an array of values.

Grammar::wrapTable() — Method in class Grammar

Wrap a table in keyword identifiers.

Grammar::wrap() — Method in class Grammar

Wrap a value in keyword identifiers.

Grammar::wrapAliasedValue() — Method in class Grammar

Wrap a value that has an alias.

Grammar::wrapSegments() — Method in class Grammar

Wrap the given value segments.

Grammar::wrapValue() — Method in class Grammar

Wrap a single string in keyword identifiers.

Grammar::wrapJsonSelector() — Method in class Grammar

Wrap the given JSON selector.

$ Migration#withinTransactionProperty in class Migration

Enables, if supported, wrapping the migration within a transaction.

Migrator::write() — Method in class Migrator

Write to the console's output.

$ Builder#wheresProperty in class Builder

The where constraints for the query.

Builder::where() — Method in class Builder

Add a basic where clause to the query.

Builder::whereNot() — Method in class Builder

Add a basic "where not" clause to the query.

Builder::whereColumn() — Method in class Builder

Add a "where" clause comparing two columns to the query.

Builder::whereRaw() — Method in class Builder

Add a raw where clause to the query.

Builder::whereIn() — Method in class Builder

Add a "where in" clause to the query.

Builder::whereNotIn() — Method in class Builder

Add a "where not in" clause to the query.

Builder::whereIntegerInRaw() — Method in class Builder

Add a "where in raw" clause for integer values to the query.

Builder::whereIntegerNotInRaw() — Method in class Builder

Add a "where not in raw" clause for integer values to the query.

Builder::whereNull() — Method in class Builder

Add a "where null" clause to the query.

Builder::whereNotNull() — Method in class Builder

Add a "where not null" clause to the query.

Builder::whereBetween() — Method in class Builder

Add a where between statement to the query.

Builder::whereBetweenColumns() — Method in class Builder

Add a where between statement using columns to the query.

Builder::whereNotBetween() — Method in class Builder

Add a where not between statement to the query.

Builder::whereNotBetweenColumns() — Method in class Builder

Add a where not between statement using columns to the query.

Builder::whereDate() — Method in class Builder

Add a "where date" statement to the query.

Builder::whereTime() — Method in class Builder

Add a "where time" statement to the query.

Builder::whereDay() — Method in class Builder

Add a "where day" statement to the query.

Builder::whereMonth() — Method in class Builder

Add a "where month" statement to the query.

Builder::whereYear() — Method in class Builder

Add a "where year" statement to the query.

Builder::whereNested() — Method in class Builder

Add a nested where statement to the query.

Builder::whereSub() — Method in class Builder

Add a full sub-select to the query.

Builder::whereExists() — Method in class Builder

Add an exists clause to the query.

Builder::whereNotExists() — Method in class Builder

Add a where not exists clause to the query.

Builder::whereRowValues() — Method in class Builder

Adds a where condition using row values.

Builder::whereJsonContains() — Method in class Builder

Add a "where JSON contains" clause to the query.

Builder::whereJsonDoesntContain() — Method in class Builder

Add a "where JSON not contains" clause to the query.

Builder::whereJsonContainsKey() — Method in class Builder

Add a clause that determines if a JSON path exists to the query.

Builder::whereJsonDoesntContainKey() — Method in class Builder

Add a clause that determines if a JSON path does not exist to the query.

Builder::whereJsonLength() — Method in class Builder

Add a "where JSON length" clause to the query.

Builder::whereFullText() — Method in class Builder

Add a "where fulltext" clause to the query.

Builder::withoutSelectAliases() — Method in class Builder

Remove the column aliases since they will break count queries.

Grammar::whereRaw() — Method in class Grammar

Compile a raw where clause.

Grammar::whereBasic() — Method in class Grammar

Compile a basic where clause.

Grammar::whereBitwise() — Method in class Grammar

Compile a bitwise operator where clause.

Grammar::whereIn() — Method in class Grammar

Compile a "where in" clause.

Grammar::whereNotIn() — Method in class Grammar

Compile a "where not in" clause.

Grammar::whereNotInRaw() — Method in class Grammar

Compile a "where not in raw" clause.

Grammar::whereInRaw() — Method in class Grammar

Compile a "where in raw" clause.

Grammar::whereNull() — Method in class Grammar

Compile a "where null" clause.

Grammar::whereNotNull() — Method in class Grammar

Compile a "where not null" clause.

Grammar::whereBetween() — Method in class Grammar

Compile a "between" where clause.

Grammar::whereBetweenColumns() — Method in class Grammar

Compile a "between" where clause.

Grammar::whereDate() — Method in class Grammar

Compile a "where date" clause.

Grammar::whereTime() — Method in class Grammar

Compile a "where time" clause.

Grammar::whereDay() — Method in class Grammar

Compile a "where day" clause.

Grammar::whereMonth() — Method in class Grammar

Compile a "where month" clause.

Grammar::whereYear() — Method in class Grammar

Compile a "where year" clause.

Grammar::whereColumn() — Method in class Grammar

Compile a where clause comparing two columns.

Grammar::whereNested() — Method in class Grammar

Compile a nested where clause.

Grammar::whereSub() — Method in class Grammar

Compile a where condition with a sub-select.

Grammar::whereExists() — Method in class Grammar

Compile a where exists clause.

Grammar::whereNotExists() — Method in class Grammar

Compile a where exists clause.

Grammar::whereRowValues() — Method in class Grammar

Compile a where row values condition.

Grammar::whereJsonBoolean() — Method in class Grammar

Compile a "where JSON boolean" clause.

Grammar::whereJsonContains() — Method in class Grammar

Compile a "where JSON contains" clause.

Grammar::whereJsonContainsKey() — Method in class Grammar

Compile a "where JSON contains key" clause.

Grammar::whereJsonLength() — Method in class Grammar

Compile a "where JSON length" clause.

Grammar::whereFullText() — Method in class Grammar

Compile a "where fulltext" clause.

Grammar::wrapUnion() — Method in class Grammar

Wrap a union subquery in parentheses.

Grammar::wrapJsonBooleanSelector() — Method in class Grammar

Wrap the given JSON selector for boolean values.

Grammar::wrapJsonBooleanValue() — Method in class Grammar

Wrap the given JSON boolean value.

MySqlGrammar::whereNull() — Method in class MySqlGrammar

Add a "where null" clause to the query.

MySqlGrammar::whereNotNull() — Method in class MySqlGrammar

Add a "where not null" clause to the query.

MySqlGrammar::whereFullText() — Method in class MySqlGrammar

Compile a "where fulltext" clause.

MySqlGrammar::wrapValue() — Method in class MySqlGrammar

Wrap a single string in keyword identifiers.

MySqlGrammar::wrapJsonSelector() — Method in class MySqlGrammar

Wrap the given JSON selector.

MySqlGrammar::wrapJsonBooleanSelector() — Method in class MySqlGrammar

Wrap the given JSON selector for boolean values.

PostgresGrammar::whereBasic() — Method in class PostgresGrammar

Compile a basic where clause.

PostgresGrammar::whereBitwise() — Method in class PostgresGrammar

Compile a bitwise operator where clause.

PostgresGrammar::whereDate() — Method in class PostgresGrammar

Compile a "where date" clause.

PostgresGrammar::whereTime() — Method in class PostgresGrammar

Compile a "where time" clause.

PostgresGrammar::whereFullText() — Method in class PostgresGrammar

Compile a "where fulltext" clause.

PostgresGrammar::wrapJsonSelector() — Method in class PostgresGrammar

Wrap the given JSON selector.

PostgresGrammar::wrapJsonBooleanSelector() — Method in class PostgresGrammar

Wrap the given JSON selector for boolean values.

PostgresGrammar::wrapJsonBooleanValue() — Method in class PostgresGrammar

Wrap the given JSON boolean value.

PostgresGrammar::wrapJsonPathAttributes() — Method in class PostgresGrammar

Wrap the attributes of the given JSON path.

SQLiteGrammar::wrapUnion() — Method in class SQLiteGrammar

Wrap a union subquery in parentheses.

SQLiteGrammar::whereDate() — Method in class SQLiteGrammar

Compile a "where date" clause.

SQLiteGrammar::whereDay() — Method in class SQLiteGrammar

Compile a "where day" clause.

SQLiteGrammar::whereMonth() — Method in class SQLiteGrammar

Compile a "where month" clause.

SQLiteGrammar::whereYear() — Method in class SQLiteGrammar

Compile a "where year" clause.

SQLiteGrammar::whereTime() — Method in class SQLiteGrammar

Compile a "where time" clause.

SQLiteGrammar::wrapJsonSelector() — Method in class SQLiteGrammar

Wrap the given JSON selector.

SqlServerGrammar::whereBitwise() — Method in class SqlServerGrammar

Compile a bitwise operator where clause.

SqlServerGrammar::whereDate() — Method in class SqlServerGrammar

Compile a "where date" clause.

SqlServerGrammar::whereTime() — Method in class SqlServerGrammar

Compile a "where time" clause.

SqlServerGrammar::wrapUnion() — Method in class SqlServerGrammar

Wrap a union subquery in parentheses.

SqlServerGrammar::wrapValue() — Method in class SqlServerGrammar

Wrap a single string in keyword identifiers.

SqlServerGrammar::wrapJsonSelector() — Method in class SqlServerGrammar

Wrap the given JSON selector.

SqlServerGrammar::wrapJsonBooleanValue() — Method in class SqlServerGrammar

Wrap the given JSON boolean value.

SqlServerGrammar::wrapTable() — Method in class SqlServerGrammar

Wrap a table in keyword identifiers.

SqlServerGrammar::wrapTableValuedFunction() — Method in class SqlServerGrammar

Wrap a table in keyword identifiers.

Builder::whenTableHasColumn() — Method in class Builder

Execute a table builder callback if the given table has a given column.

Builder::whenTableDoesntHaveColumn() — Method in class Builder

Execute a table builder callback if the given table doesn't have a given column.

Builder::withoutForeignKeyConstraints() — Method in class Builder

Disable foreign key constraints during the execution of a callback.

Grammar::wrapTable() — Method in class Grammar

Wrap a table in keyword identifiers.

Grammar::wrap() — Method in class Grammar

Wrap a value in keyword identifiers.

MySqlGrammar::wrapValue() — Method in class MySqlGrammar

Wrap a single string in keyword identifiers.

MySqlGrammar::wrapJsonSelector() — Method in class MySqlGrammar

Wrap the given JSON selector.

SQLiteGrammar::wrapJsonSelector() — Method in class SQLiteGrammar

Wrap the given JSON selector.

SqlServerGrammar::wrapTable() — Method in class SqlServerGrammar

Wrap a table in keyword identifiers.

SchemaState::withMigrationTable() — Method in class SchemaState

Specify the name of the application's migration table.

$ Dispatcher#wildcardsProperty in class Dispatcher

The wildcard listeners.

$ Dispatcher#wildcardsCacheProperty in class Dispatcher

The cached wildcard listeners.

FilesystemAdapter::writeStream() — Method in class FilesystemAdapter

Write a new file using a stream.

LockableFile::write() — Method in class LockableFile

Write to the file.

EmailVerificationRequest::withValidator() — Method in class EmailVerificationRequest

Configure the validator instance.

LoadEnvironmentVariables::writeErrorAndDie() — Method in class LoadEnvironmentVariables

Write the error information to the screen and exit.

Dispatchable::withChain() — Method in class Dispatchable

Set the jobs that should run if this job is successful.

ComponentMakeCommand::writeView() — Method in class ComponentMakeCommand

Write the view for the component.

Kernel::whenCommandLifecycleIsLongerThan() — Method in class Kernel

Register a callback to be invoked when the command lifecycle duration exceeds a given amount of time.

KeyGenerateCommand::writeNewEnvironmentFileWith() — Method in class KeyGenerateCommand

Write a new environment file with the given key.

MailMakeCommand::writeMarkdownTemplate() — Method in class MailMakeCommand

Write the Markdown template for the mailable.

NotificationMakeCommand::writeMarkdownTemplate() — Method in class NotificationMakeCommand

Write the Markdown template for the mailable.

DiscoverEvents::within() — Method in class DiscoverEvents

Get all of the events and listeners by searching the given listener directory.

WhoopsExceptionRendererClass in namespace Illuminate\Foundation\Exceptions\Whoops
WhoopsExceptionRenderer::whoopsHandler() — Method in class WhoopsExceptionRenderer

Get the Whoops handler for the application.

WhoopsHandlerClass in namespace Illuminate\Foundation\Exceptions\Whoops
Kernel::whenRequestLifecycleIsLongerThan() — Method in class Kernel

Register a callback to be invoked when the requests lifecycle duration exceeds a given amount of time.

PackageManifest::write() — Method in class PackageManifest

Write the given manifest array to disk.

ProviderRepository::writeManifest() — Method in class ProviderRepository

Write the service manifest file to disk.

InteractsWithConsole::withoutMockingConsoleOutput() — Method in class InteractsWithConsole

Disable mocking the console output.

InteractsWithContainer::withoutVite() — Method in class InteractsWithContainer

Register an empty handler for Vite in the container.

InteractsWithContainer::withEntryPoints() — Method in class InteractsWithContainer
InteractsWithDeprecationHandling::withDeprecationHandling() — Method in class InteractsWithDeprecationHandling

Restore deprecation handling.

InteractsWithDeprecationHandling::withoutDeprecationHandling() — Method in class InteractsWithDeprecationHandling

Disable deprecation handling for the test.

InteractsWithExceptionHandling::withExceptionHandling() — Method in class InteractsWithExceptionHandling

Restore exception handling.

InteractsWithExceptionHandling::withoutExceptionHandling() — Method in class InteractsWithExceptionHandling

Disable exception handling for the test.

InteractsWithSession::withSession() — Method in class InteractsWithSession

Set the session to the given array.

InteractsWithViews::withViewErrors() — Method in class InteractsWithViews

Populate the shared view error bag with the given errors.

$ MakesHttpRequests#withCredentialsProperty in class MakesHttpRequests

Indicated whether JSON requests should be performed "with credentials" (cookies).

MakesHttpRequests::withHeaders() — Method in class MakesHttpRequests

Define additional headers to be sent with the request.

MakesHttpRequests::withHeader() — Method in class MakesHttpRequests

Add a header to be sent with the request.

MakesHttpRequests::withToken() — Method in class MakesHttpRequests

Add an authorization token for the request.

MakesHttpRequests::withBasicAuth() — Method in class MakesHttpRequests

Add a basic authentication header to the request with the given credentials.

MakesHttpRequests::withoutToken() — Method in class MakesHttpRequests

Remove the authorization token from the request.

MakesHttpRequests::withServerVariables() — Method in class MakesHttpRequests

Define a set of server variables to be sent with the requests.

MakesHttpRequests::withoutMiddleware() — Method in class MakesHttpRequests

Disable middleware for the test.

WithFakerClass in namespace Illuminate\Foundation\Testing
WithoutEventsClass in namespace Illuminate\Foundation\Testing
WithoutMiddlewareClass in namespace Illuminate\Foundation\Testing
WormholeClass in namespace Illuminate\Foundation\Testing
Wormhole::week() — Method in class Wormhole

Travel forward the given number of weeks.

Wormhole::weeks() — Method in class Wormhole

Travel forward the given number of weeks.

Vite::withEntryPoints() — Method in class Vite

Set the Vite entry points.

PendingRequest::withBody() — Method in class PendingRequest

Attach a raw body to the request.

PendingRequest::withHeaders() — Method in class PendingRequest

Add the given headers to the request.

PendingRequest::withBasicAuth() — Method in class PendingRequest

Specify the basic authentication username and password for the request.

PendingRequest::withDigestAuth() — Method in class PendingRequest

Specify the digest authentication username and password for the request.

PendingRequest::withToken() — Method in class PendingRequest

Specify an authorization token for the request.

PendingRequest::withUserAgent() — Method in class PendingRequest

Specify the user agent for the request.

PendingRequest::withUrlParameters() — Method in class PendingRequest

Specify the URL parameters that can be substituted into the request URL.

PendingRequest::withCookies() — Method in class PendingRequest

Specify the cookies that should be included with the request.

PendingRequest::withoutRedirecting() — Method in class PendingRequest

Indicate that redirects should not be followed.

PendingRequest::withoutVerifying() — Method in class PendingRequest

Indicate that TLS certificates should not be verified.

PendingRequest::withOptions() — Method in class PendingRequest

Replace the specified options on the request.

PendingRequest::withMiddleware() — Method in class PendingRequest

Add new middleware the client handler stack.

Request::withData() — Method in class Request

Set the decoded data on the request.

ResponseSequence::whenEmpty() — Method in class ResponseSequence

Make the sequence return a default response when it is empty.

InteractsWithContentTypes::wantsJson() — Method in class InteractsWithContentTypes

Determine if the current request is asking for JSON.

InteractsWithInput::whenHas() — Method in class InteractsWithInput

Apply the callback if the request contains the given input item key.

InteractsWithInput::whenFilled() — Method in class InteractsWithInput

Apply the callback if the request contains a non-empty value for the given input item key.

InteractsWithInput::whenMissing() — Method in class InteractsWithInput

Apply the callback if the request is missing the given input item key.

JsonResponse::withCallback() — Method in class JsonResponse

Sets the JSONP callback.

RedirectResponse::with() — Method in class RedirectResponse

Flash a piece of data to the session.

RedirectResponse::withCookies() — Method in class RedirectResponse

Add multiple cookies to the response.

RedirectResponse::withInput() — Method in class RedirectResponse

Flash an array of input to the session.

RedirectResponse::withErrors() — Method in class RedirectResponse

Flash a container of errors to the session.

RedirectResponse::withFragment() — Method in class RedirectResponse

Add a fragment identifier to the URL.

RedirectResponse::withoutFragment() — Method in class RedirectResponse

Remove any fragment identifier from the response URL.

ConditionallyLoadsAttributes::when() — Method in class ConditionallyLoadsAttributes

Retrieve a value if the given "condition" is truthy.

ConditionallyLoadsAttributes::whenHas() — Method in class ConditionallyLoadsAttributes

Retrieve an attribute if it exists on the resource.

ConditionallyLoadsAttributes::whenNull() — Method in class ConditionallyLoadsAttributes

Retrieve a model attribute if it is null.

ConditionallyLoadsAttributes::whenNotNull() — Method in class ConditionallyLoadsAttributes

Retrieve a model attribute if it is not null.

ConditionallyLoadsAttributes::whenAppended() — Method in class ConditionallyLoadsAttributes

Retrieve an accessor when it has been appended.

ConditionallyLoadsAttributes::whenLoaded() — Method in class ConditionallyLoadsAttributes

Retrieve a relationship if it has been loaded.

ConditionallyLoadsAttributes::whenCounted() — Method in class ConditionallyLoadsAttributes

Retrieve a relationship count if it exists.

ConditionallyLoadsAttributes::whenPivotLoaded() — Method in class ConditionallyLoadsAttributes

Execute a callback if the given pivot table has been loaded.

ConditionallyLoadsAttributes::whenPivotLoadedAs() — Method in class ConditionallyLoadsAttributes

Execute a callback if the given pivot table with a custom accessor has been loaded.

$ JsonResource#withProperty in class JsonResource

The additional data that should be added to the top-level resource array.

$ JsonResource#wrapProperty in class JsonResource

The "data" wrapper that should be applied.

JsonResource::with() — Method in class JsonResource

Get any additional data that should be returned with the resource array.

JsonResource::withResponse() — Method in class JsonResource

Customize the response for a request.

JsonResource::wrap() — Method in class JsonResource

Set the string that should wrap the outer-most resource array.

JsonResource::withoutWrapping() — Method in class JsonResource

Disable wrapping of the outer-most resource array.

ResourceCollection::withQuery() — Method in class ResourceCollection

Specify the query string parameters that should be present on pagination links.

ResourceResponse::wrap() — Method in class ResourceResponse

Wrap the given data if necessary.

ResourceResponse::wrapper() — Method in class ResourceResponse

Get the default data wrapper for the resource.

ResponseTrait::withHeaders() — Method in class ResponseTrait

Add an array of headers to the response.

ResponseTrait::withCookie() — Method in class ResponseTrait

Add a cookie to the response.

ResponseTrait::withoutCookie() — Method in class ResponseTrait

Expire a cookie when sending the response.

ResponseTrait::withException() — Method in class ResponseTrait

Set the exception to attach to the response.

LogManager::warning() — Method in class LogManager

Exceptional occurrences that are not errors.

Logger::warning() — Method in class Logger

Log a warning message to the logs.

Logger::write() — Method in class Logger

Dynamically pass log calls into the writer.

Logger::writeLog() — Method in class Logger

Write a message to the log.

Logger::withContext() — Method in class Logger

Add context to all future logs.

Logger::withoutContext() — Method in class Logger

Flush the existing context array.

Attachment::withMime() — Method in class Attachment

Set the attached file's mime type.

Mailable::with() — Method in class Mailable

Set the view data for the message.

Mailable::withSymfonyMessage() — Method in class Mailable

Register a callback to be called with the Symfony message instance.

$ Content#withProperty in class Content

The message's view data.

Content::with() — Method in class Content

Add a piece of view data to the message.

MailMessage::withSymfonyMessage() — Method in class MailMessage

Register a callback to be called with the Symfony message instance.

SimpleMessage::with() — Method in class SimpleMessage

Add a line of text to the notification.

SendQueuedNotifications::wrapNotifiables() — Method in class SendQueuedNotifications

Wrap the notifiable(s) in a collection.

AbstractCursorPaginator::withQueryString() — Method in class AbstractCursorPaginator

Add all current query string values to the paginator.

AbstractCursorPaginator::withPath() — Method in class AbstractCursorPaginator

Set the base path to assign to all URLs.

AbstractPaginator::withQueryString() — Method in class AbstractPaginator

Add all current query string values to the paginator.

AbstractPaginator::withPath() — Method in class AbstractPaginator

Set the base path to assign to all URLs.

FakeInvokedProcess::wait() — Method in class FakeInvokedProcess

Wait for the process to finish.

FakeInvokedProcess::withOutputHandler() — Method in class FakeInvokedProcess

Set the general output handler for the fake invoked process.

FakeProcessResult::withCommand() — Method in class FakeProcessResult

Create a new fake process result with the given command.

FakeProcessSequence::whenEmpty() — Method in class FakeProcessSequence

Make the sequence return a default result when it is empty.

InvokedProcess::wait() — Method in class InvokedProcess

Wait for the process to finish.

InvokedProcessPool::wait() — Method in class InvokedProcessPool

Wait for the processes to finish.

PendingProcess::withFakeHandlers() — Method in class PendingProcess

Specify the fake process result handlers for the pending process.

Pool::wait() — Method in class Pool

Start and wait for the processes to finish.

WorkCommandClass in namespace Illuminate\Queue\Console
$ WorkCommand#workerProperty in class WorkCommand

The queue worker instance.

WorkCommand::writeOutput() — Method in class WorkCommand

Write the status output for the queue worker.

WorkerStoppingClass in namespace Illuminate\Queue\Events
$ WorkerStopping#workerOptionsProperty in class WorkerStopping

The worker options.

$ ThrottlesExceptions#whenCallbackProperty in class ThrottlesExceptions

The callback that determines if rate limiting should apply.

ThrottlesExceptions::when() — Method in class ThrottlesExceptions

Specify a callback that should determine if rate limiting behavior should apply.

ThrottlesExceptions::withPrefix() — Method in class ThrottlesExceptions

Set the prefix of the rate limiter key.

WithoutOverlappingClass in namespace Illuminate\Queue\Middleware
WithoutOverlapping::withPrefix() — Method in class WithoutOverlapping

Set the prefix of the lock key.

Queue::withCreatePayloadHooks() — Method in class Queue

Create the given payload using any registered payload hooks.

WorkerClass in namespace Illuminate\Queue
WorkerOptionsClass in namespace Illuminate\Queue
CreatesRegularExpressionRouteConstraints::whereAlpha() — Method in class CreatesRegularExpressionRouteConstraints

Specify that the given route parameters must be alphabetic.

CreatesRegularExpressionRouteConstraints::whereAlphaNumeric() — Method in class CreatesRegularExpressionRouteConstraints

Specify that the given route parameters must be alphanumeric.

CreatesRegularExpressionRouteConstraints::whereNumber() — Method in class CreatesRegularExpressionRouteConstraints

Specify that the given route parameters must be numeric.

CreatesRegularExpressionRouteConstraints::whereUlid() — Method in class CreatesRegularExpressionRouteConstraints

Specify that the given route parameters must be ULIDs.

CreatesRegularExpressionRouteConstraints::whereUuid() — Method in class CreatesRegularExpressionRouteConstraints

Specify that the given route parameters must be UUIDs.

CreatesRegularExpressionRouteConstraints::whereIn() — Method in class CreatesRegularExpressionRouteConstraints

Specify that the given route parameters must be one of the given values.

PendingResourceRegistration::withoutMiddleware() — Method in class PendingResourceRegistration

Specify middleware that should be removed from the resource routes.

PendingResourceRegistration::where() — Method in class PendingResourceRegistration

Add "where" constraints to the resource routes.

PendingResourceRegistration::withTrashed() — Method in class PendingResourceRegistration

Define which routes should allow "trashed" models to be retrieved when resolving implicit model bindings.

PendingSingletonResourceRegistration::withoutMiddleware() — Method in class PendingSingletonResourceRegistration

Specify middleware that should be removed from the resource routes.

PendingSingletonResourceRegistration::where() — Method in class PendingSingletonResourceRegistration

Add "where" constraints to the resource routes.

$ Route#wheresProperty in class Route

The regular expression requirements.

$ Route#withTrashedBindingsProperty in class Route

Indicates "trashed" models can be retrieved when resolving implicit model bindings for this route.

$ Route#waitSecondsProperty in class Route

Indicates the maximum number of seconds the route should wait while attempting to acquire a session lock.

Route::withTrashed() — Method in class Route

Allow "trashed" models to be retrieved when resolving implicit model bindings for this route.

Route::where() — Method in class Route

Set a regular expression requirement on the route.

Route::withoutMiddleware() — Method in class Route

Specify middleware that should be removed from the given route.

Route::withoutScopedBindings() — Method in class Route

Indicate that the route should not enforce scoping of multiple implicit Eloquent bindings.

Route::withoutBlocking() — Method in class Route

Specify that the route should allow concurrent requests from the same session.

Route::waitsFor() — Method in class Route

Get the maximum number of seconds to wait while attempting to acquire a session lock.

RouteRegistrar::where() — Method in class RouteRegistrar
RouteRegistrar::withoutMiddleware() — Method in class RouteRegistrar
RouteRegistrar::withoutScopedBindings() — Method in class RouteRegistrar
UrlGenerator::withKeyResolver() — Method in class UrlGenerator

Clone a new instance of the URL generator with a different encryption key resolver.

ArraySessionHandler::write() — Method in class ArraySessionHandler
{@inheritdoc}
CacheBasedSessionHandler::write() — Method in class CacheBasedSessionHandler
{@inheritdoc}
CookieSessionHandler::write() — Method in class CookieSessionHandler
{@inheritdoc}
DatabaseSessionHandler::write() — Method in class DatabaseSessionHandler
{@inheritdoc}
FileSessionHandler::write() — Method in class FileSessionHandler
{@inheritdoc}
NullSessionHandler::write() — Method in class NullSessionHandler
{@inheritdoc}
Arr::where() — Method in class Arr

Filter the array using the given callback.

Arr::whereNotNull() — Method in class Arr

Filter items where the value is not null.

Arr::wrap() — Method in class Arr

If the given value is not an array and not null, wrap it in one.

$ Composer#workingPathProperty in class Composer

The working path to regenerate from.

Enumerable::wrap() — Method in class Enumerable
Enumerable::when() — Method in class Enumerable

Apply the callback if the given "value" is (or resolves to) truthy.

Enumerable::whenEmpty() — Method in class Enumerable

Apply the callback if the collection is empty.

Enumerable::whenNotEmpty() — Method in class Enumerable

Apply the callback if the collection is not empty.

Enumerable::where() — Method in class Enumerable

Filter items by the given key value pair.

Enumerable::whereNull() — Method in class Enumerable

Filter items where the value for the given key is null.

Enumerable::whereNotNull() — Method in class Enumerable

Filter items where the value for the given key is not null.

Enumerable::whereStrict() — Method in class Enumerable

Filter items by the given key value pair using strict comparison.

Enumerable::whereIn() — Method in class Enumerable

Filter items by the given key value pair.

Enumerable::whereInStrict() — Method in class Enumerable

Filter items by the given key value pair using strict comparison.

Enumerable::whereBetween() — Method in class Enumerable

Filter items such that the value of the given key is between the given values.

Enumerable::whereNotBetween() — Method in class Enumerable

Filter items such that the value of the given key is not between the given values.

Enumerable::whereNotIn() — Method in class Enumerable

Filter items by the given key value pair.

Enumerable::whereNotInStrict() — Method in class Enumerable

Filter items by the given key value pair using strict comparison.

Enumerable::whereInstanceOf() — Method in class Enumerable
App::when() — Method in class App
App::wrap() — Method in class App
Artisan::whenCommandLifecycleIsLongerThan() — Method in class Artisan
Blade::withDoubleEncoding() — Method in class Blade
Blade::withoutDoubleEncoding() — Method in class Blade
Blade::withoutComponentTags() — Method in class Blade
DB::whenQueryingForLongerThan() — Method in class DB
DB::withTablePrefix() — Method in class DB
File::when() — Method in class File
Http::withBody() — Method in class Http
Http::withHeaders() — Method in class Http
Http::withBasicAuth() — Method in class Http
Http::withDigestAuth() — Method in class Http
Http::withToken() — Method in class Http
Http::withUserAgent() — Method in class Http
Http::withUrlParameters() — Method in class Http
Http::withCookies() — Method in class Http
Http::withoutRedirecting() — Method in class Http
Http::withoutVerifying() — Method in class Http
Http::withOptions() — Method in class Http
Http::withMiddleware() — Method in class Http
Http::when() — Method in class Http
Log::warning() — Method in class Log
Log::write() — Method in class Log
Log::withContext() — Method in class Log
Log::withoutContext() — Method in class Log
Log::when() — Method in class Log
Process::withFakeHandlers() — Method in class Process
Request::wantsJson() — Method in class Request
Request::whenHas() — Method in class Request
Request::whenFilled() — Method in class Request
Request::whenMissing() — Method in class Request
Route::whereAlpha() — Method in class Route
Route::whereAlphaNumeric() — Method in class Route
Route::whereNumber() — Method in class Route
Route::whereUlid() — Method in class Route
Route::whereUuid() — Method in class Route
Route::whereIn() — Method in class Route
Route::where() — Method in class Route
Route::withoutMiddleware() — Method in class Route
Route::withoutScopedBindings() — Method in class Route
Schema::whenTableHasColumn() — Method in class Schema
Schema::whenTableDoesntHaveColumn() — Method in class Schema
Schema::withoutForeignKeyConstraints() — Method in class Schema
Storage::writeStream() — Method in class Storage
Storage::when() — Method in class Storage
Storage::write() — Method in class Storage
URL::withKeyResolver() — Method in class URL
Vite::withEntryPoints() — Method in class Vite
$ Lottery#winnerProperty in class Lottery

The winning callback.

Lottery::winner() — Method in class Lottery

Set the winner callback.

Lottery::wins() — Method in class Lottery

Determine if the lottery "wins" or "loses".

ServiceProvider::when() — Method in class ServiceProvider

Get the events that trigger this service provider to register.

Str::wrap() — Method in class Str

Wrap the string with the given strings.

Str::words() — Method in class Str

Limit the number of words in a string.

Str::wordCount() — Method in class Str

Get the number of words a string contains.

Stringable::whenContains() — Method in class Stringable

Execute the given callback if the string contains a given substring.

Stringable::whenContainsAll() — Method in class Stringable

Execute the given callback if the string contains all array values.

Stringable::whenEmpty() — Method in class Stringable

Execute the given callback if the string is empty.

Stringable::whenNotEmpty() — Method in class Stringable

Execute the given callback if the string is not empty.

Stringable::whenEndsWith() — Method in class Stringable

Execute the given callback if the string ends with a given substring.

Stringable::whenExactly() — Method in class Stringable

Execute the given callback if the string is an exact match with the given value.

Stringable::whenNotExactly() — Method in class Stringable

Execute the given callback if the string is not an exact match with the given value.

Stringable::whenIs() — Method in class Stringable

Execute the given callback if the string matches a given pattern.

Stringable::whenIsAscii() — Method in class Stringable

Execute the given callback if the string is 7 bit ASCII.

Stringable::whenIsUuid() — Method in class Stringable

Execute the given callback if the string is a valid UUID.

Stringable::whenIsUlid() — Method in class Stringable

Execute the given callback if the string is a valid ULID.

Stringable::whenStartsWith() — Method in class Stringable

Execute the given callback if the string starts with a given substring.

Stringable::whenTest() — Method in class Stringable

Execute the given callback if the string matches the given pattern.

Stringable::words() — Method in class Stringable

Limit the number of words in a string.

Stringable::wordCount() — Method in class Stringable

Get the number of words a string contains.

Stringable::wrap() — Method in class Stringable

Wrap the string with the given strings.

Conditionable::when() — Method in class Conditionable

Apply the callback if the given "value" is (or resolves to) truthy.

$ EnumeratesValues#whenProperty in class EnumeratesValues
EnumeratesValues::wrap() — Method in class EnumeratesValues
EnumeratesValues::whenEmpty() — Method in class EnumeratesValues

Apply the callback if the collection is empty.

EnumeratesValues::whenNotEmpty() — Method in class EnumeratesValues

Apply the callback if the collection is not empty.

EnumeratesValues::where() — Method in class EnumeratesValues

Filter items by the given key value pair.

EnumeratesValues::whereNull() — Method in class EnumeratesValues

Filter items where the value for the given key is null.

EnumeratesValues::whereNotNull() — Method in class EnumeratesValues

Filter items where the value for the given key is not null.

EnumeratesValues::whereStrict() — Method in class EnumeratesValues

Filter items by the given key value pair using strict comparison.

EnumeratesValues::whereIn() — Method in class EnumeratesValues

Filter items by the given key value pair.

EnumeratesValues::whereInStrict() — Method in class EnumeratesValues

Filter items by the given key value pair using strict comparison.

EnumeratesValues::whereBetween() — Method in class EnumeratesValues

Filter items such that the value of the given key is between the given values.

EnumeratesValues::whereNotBetween() — Method in class EnumeratesValues

Filter items such that the value of the given key is not between the given values.

EnumeratesValues::whereNotIn() — Method in class EnumeratesValues

Filter items by the given key value pair.

EnumeratesValues::whereNotInStrict() — Method in class EnumeratesValues

Filter items by the given key value pair using strict comparison.

EnumeratesValues::whereInstanceOf() — Method in class EnumeratesValues
Localizable::withLocale() — Method in class Localizable

Run the callback with the given locale.

TestDatabases::whenNotUsingInMemoryDatabase() — Method in class TestDatabases

Apply the given callback when tests are not using in memory database.

Matching::where() — Method in class Matching

Asserts that the property matches the expected value.

Matching::whereNot() — Method in class Matching

Asserts that the property does not match the expected value.

Matching::whereAll() — Method in class Matching

Asserts that all properties match their expected values.

Matching::whereType() — Method in class Matching

Asserts that the property is of the expected type.

Matching::whereAllType() — Method in class Matching

Asserts that all properties are of their expected types.

Matching::whereContains() — Method in class Matching

Asserts that the property contains the expected values.

ParallelConsoleOutput::write() — Method in class ParallelConsoleOutput

Writes a message to the output.

ParallelTesting::whenRunningInParallel() — Method in class ParallelTesting

Apply the callback if tests are running in parallel.

TestResponse::withExceptions() — Method in class TestResponse

Set the previous exceptions on the response.

Rule::when() — Method in class Rule

Create a new conditional rule set.

$ DatabaseRule#wheresProperty in class DatabaseRule

The extra where clauses for the query.

DatabaseRule::where() — Method in class DatabaseRule

Set a "where" constraint on the query.

DatabaseRule::whereNot() — Method in class DatabaseRule

Set a "where not" constraint on the query.

DatabaseRule::whereNull() — Method in class DatabaseRule

Set a "where null" constraint on the query.

DatabaseRule::whereNotNull() — Method in class DatabaseRule

Set a "where not null" constraint on the query.

DatabaseRule::whereIn() — Method in class DatabaseRule

Set a "where in" constraint on the query.

DatabaseRule::whereNotIn() — Method in class DatabaseRule

Set a "where not in" constraint on the query.

DatabaseRule::withoutTrashed() — Method in class DatabaseRule

Ignore soft deleted models during the existence check.

Dimensions::width() — Method in class Dimensions

Set the "width" constraint.

ValidationException::withMessages() — Method in class ValidationException

Create a new validation exception from a plain array of messages.

CompilesEchos::wrapInEchoHandler() — Method in class CompilesEchos

Wrap the echoable value in an echo handler if applicable.

Component::withName() — Method in class Component

Set the component alias name.

Component::withAttributes() — Method in class Component

Set the extra attributes that the component should make available.

ComponentAttributeBag::whereStartsWith() — Method in class ComponentAttributeBag

Return a bag of attributes that have keys starting with the given value / pattern.

ComponentAttributeBag::whereDoesntStartWith() — Method in class ComponentAttributeBag

Return a bag of attributes with keys that do not start with the given value / pattern.

ComponentSlot::withAttributes() — Method in class ComponentSlot

Set the extra attributes that the slot should make available.

View::with() — Method in class View

Add a piece of data to the view.

View::withErrors() — Method in class View

Add validation errors to the view.

Y

ManagesFrequencies::yearly() — Method in class ManagesFrequencies

Schedule the event to run yearly.

ManagesFrequencies::yearlyOn() — Method in class ManagesFrequencies

Schedule the event to run yearly on a given month, day, and time.

Blueprint::year() — Method in class Blueprint

Create a new year column on the table.

Wormhole::year() — Method in class Wormhole

Travel forward the given number of years.

Wormhole::years() — Method in class Wormhole

Travel forward the given number of years.

DateFactory::yesterday() — Method in class DateFactory
Date::yesterday() — Method in class Date
View::yieldSection() — Method in class View
View::yieldContent() — Method in class View
View::yieldPushContent() — Method in class View
ManagesLayouts::yieldSection() — Method in class ManagesLayouts

Stop injecting content into a section and return its contents.

ManagesLayouts::yieldContent() — Method in class ManagesLayouts

Get the string contents of a section.

ManagesStacks::yieldPushContent() — Method in class ManagesStacks

Get the string contents of a push section.

Z

Collection::zip() — Method in class Collection

Zip the collection together with one or more arrays.

PacksPhpRedisValues::zstdCompressed() — Method in class PacksPhpRedisValues

Determine if ZSTD compression is enabled.

PhpRedisConnection::zadd() — Method in class PhpRedisConnection

Add one or more members to a sorted set or update its score if it already exists.

PhpRedisConnection::zrangebyscore() — Method in class PhpRedisConnection

Return elements with score between $min and $max.

PhpRedisConnection::zrevrangebyscore() — Method in class PhpRedisConnection

Return elements with score between $min and $max.

PhpRedisConnection::zinterstore() — Method in class PhpRedisConnection

Find the intersection between sets and store in a new set.

PhpRedisConnection::zunionstore() — Method in class PhpRedisConnection

Find the union between sets and store in a new set.

PhpRedisConnection::zscan() — Method in class PhpRedisConnection

Scans the given set for all values based on options.

Collection::zip() — Method in class Collection
Enumerable::zip() — Method in class Enumerable
LazyCollection::zip() — Method in class LazyCollection

_

AuthorizationException::__construct() — Method in class AuthorizationException

Create a new authorization exception instance.

GateEvaluated::__construct() — Method in class GateEvaluated

Create a new event instance.

Gate::__construct() — Method in class Gate

Create a new gate instance.

Response::__construct() — Method in class Response

Create a new response.

Response::__toString() — Method in class Response

Get the string representation of the message.

AuthManager::__construct() — Method in class AuthManager

Create a new Auth manager instance.

AuthManager::__call() — Method in class AuthManager

Dynamically call the default driver instance.

AuthenticationException::__construct() — Method in class AuthenticationException

Create a new authentication exception.

DatabaseUserProvider::__construct() — Method in class DatabaseUserProvider

Create a new database user provider.

EloquentUserProvider::__construct() — Method in class EloquentUserProvider

Create a new database user provider.

Attempting::__construct() — Method in class Attempting

Create a new event instance.

Authenticated::__construct() — Method in class Authenticated

Create a new event instance.

CurrentDeviceLogout::__construct() — Method in class CurrentDeviceLogout

Create a new event instance.

Failed::__construct() — Method in class Failed

Create a new event instance.

Lockout::__construct() — Method in class Lockout

Create a new event instance.

Login::__construct() — Method in class Login

Create a new event instance.

Logout::__construct() — Method in class Logout

Create a new event instance.

OtherDeviceLogout::__construct() — Method in class OtherDeviceLogout

Create a new event instance.

PasswordReset::__construct() — Method in class PasswordReset

Create a new event instance.

Registered::__construct() — Method in class Registered

Create a new event instance.

Validated::__construct() — Method in class Validated

Create a new event instance.

Verified::__construct() — Method in class Verified

Create a new event instance.

GenericUser::__construct() — Method in class GenericUser

Create a new generic User object.

GenericUser::__get() — Method in class GenericUser

Dynamically access the user's attributes.

GenericUser::__set() — Method in class GenericUser

Dynamically set an attribute on the user.

GenericUser::__isset() — Method in class GenericUser

Dynamically check if a value is set on the user.

GenericUser::__unset() — Method in class GenericUser

Dynamically unset a value on the user.

Authenticate::__construct() — Method in class Authenticate

Create a new middleware instance.

AuthenticateWithBasicAuth::__construct() — Method in class AuthenticateWithBasicAuth

Create a new middleware instance.

Authorize::__construct() — Method in class Authorize

Create a new middleware instance.

RequirePassword::__construct() — Method in class RequirePassword

Create a new middleware instance.

ResetPassword::__construct() — Method in class ResetPassword

Create a notification instance.

DatabaseTokenRepository::__construct() — Method in class DatabaseTokenRepository

Create a new token repository instance.

PasswordBroker::__construct() — Method in class PasswordBroker

Create a new password broker instance.

PasswordBrokerManager::__construct() — Method in class PasswordBrokerManager

Create a new PasswordBroker manager instance.

PasswordBrokerManager::__call() — Method in class PasswordBrokerManager

Dynamically call the default driver instance.

Recaller::__construct() — Method in class Recaller

Create a new recaller instance.

RequestGuard::__construct() — Method in class RequestGuard

Create a new authentication guard.

SessionGuard::__construct() — Method in class SessionGuard

Create a new authentication guard.

TokenGuard::__construct() — Method in class TokenGuard

Create a new authentication guard.

BroadcastEvent::__construct() — Method in class BroadcastEvent

Create a new job handler instance.

BroadcastEvent::__clone() — Method in class BroadcastEvent

Prepare the instance for cloning.

BroadcastManager::__construct() — Method in class BroadcastManager

Create a new manager instance.

BroadcastManager::__call() — Method in class BroadcastManager

Dynamically call the default driver instance.

AblyBroadcaster::__construct() — Method in class AblyBroadcaster

Create a new broadcaster instance.

LogBroadcaster::__construct() — Method in class LogBroadcaster

Create a new broadcaster instance.

PusherBroadcaster::__construct() — Method in class PusherBroadcaster

Create a new broadcaster instance.

RedisBroadcaster::__construct() — Method in class RedisBroadcaster

Create a new broadcaster instance.

Channel::__construct() — Method in class Channel

Create a new channel instance.

Channel::__toString() — Method in class Channel

Convert the channel instance to a string.

EncryptedPrivateChannel::__construct() — Method in class EncryptedPrivateChannel

Create a new channel instance.

PendingBroadcast::__construct() — Method in class PendingBroadcast

Create a new pending broadcast instance.

PendingBroadcast::__destruct() — Method in class PendingBroadcast

Handle the object's destruction.

PresenceChannel::__construct() — Method in class PresenceChannel

Create a new channel instance.

PrivateChannel::__construct() — Method in class PrivateChannel

Create a new channel instance.

UniqueBroadcastEvent::__construct() — Method in class UniqueBroadcastEvent

Create a new event instance.

Batch::__construct() — Method in class Batch

Create a new batch instance.

Batch::__get() — Method in class Batch

Dynamically access the batch's "options" via properties.

BatchFactory::__construct() — Method in class BatchFactory

Create a new batch factory instance.

DatabaseBatchRepository::__construct() — Method in class DatabaseBatchRepository

Create a new batch repository instance.

Dispatcher::__construct() — Method in class Dispatcher

Create a new command dispatcher instance.

BatchDispatched::__construct() — Method in class BatchDispatched

Create a new event instance.

PendingBatch::__construct() — Method in class PendingBatch

Create a new pending batch instance.

UniqueLock::__construct() — Method in class UniqueLock

Create a new unique lock manager instance.

UpdatedBatchJobCounts::__construct() — Method in class UpdatedBatchJobCounts

Create a new batch job counts object.

ApcStore::__construct() — Method in class ApcStore

Create a new APC store.

ApcWrapper::__construct() — Method in class ApcWrapper

Create a new APC wrapper instance.

ArrayLock::__construct() — Method in class ArrayLock

Create a new lock instance.

ArrayStore::__construct() — Method in class ArrayStore

Create a new Array store.

CacheLock::__construct() — Method in class CacheLock

Create a new lock instance.

CacheManager::__construct() — Method in class CacheManager

Create a new Cache manager instance.

CacheManager::__call() — Method in class CacheManager

Dynamically call the default driver instance.

CacheTableCommand::__construct() — Method in class CacheTableCommand

Create a new cache table command instance.

ClearCommand::__construct() — Method in class ClearCommand

Create a new cache clear command instance.

ForgetCommand::__construct() — Method in class ForgetCommand

Create a new cache clear command instance.

DatabaseLock::__construct() — Method in class DatabaseLock

Create a new lock instance.

DatabaseStore::__construct() — Method in class DatabaseStore

Create a new database store.

DynamoDbLock::__construct() — Method in class DynamoDbLock

Create a new lock instance.

DynamoDbStore::__construct() — Method in class DynamoDbStore

Create a new store instance.

CacheEvent::__construct() — Method in class CacheEvent

Create a new event instance.

CacheHit::__construct() — Method in class CacheHit

Create a new event instance.

KeyWritten::__construct() — Method in class KeyWritten

Create a new event instance.

FileStore::__construct() — Method in class FileStore

Create a new file cache store instance.

Lock::__construct() — Method in class Lock

Create a new lock instance.

MemcachedLock::__construct() — Method in class MemcachedLock

Create a new lock instance.

MemcachedStore::__construct() — Method in class MemcachedStore

Create a new Memcached store.

PhpRedisLock::__construct() — Method in class PhpRedisLock

Create a new phpredis lock instance.

RateLimiter::__construct() — Method in class RateLimiter

Create a new rate limiter instance.

GlobalLimit::__construct() — Method in class GlobalLimit

Create a new limit instance.

Limit::__construct() — Method in class Limit

Create a new limit instance.

Unlimited::__construct() — Method in class Unlimited

Create a new limit instance.

RedisLock::__construct() — Method in class RedisLock

Create a new lock instance.

RedisStore::__construct() — Method in class RedisStore

Create a new Redis store.

Repository::__construct() — Method in class Repository

Create a new cache repository instance.

Repository::__call() — Method in class Repository

Handle dynamic calls into macros or pass missing methods to the store.

Repository::__clone() — Method in class Repository

Clone cache repository instance.

TagSet::__construct() — Method in class TagSet

Create a new TagSet instance.

TaggedCache::__construct() — Method in class TaggedCache

Create a new tagged cache instance.

Repository::__construct() — Method in class Repository

Create a new configuration repository.

Application::__construct() — Method in class Application

Create a new Artisan console application.

CacheCommandMutex::__construct() — Method in class CacheCommandMutex

Create a new command mutex.

Command::__construct() — Method in class Command

Create a new console command instance.

ContainerCommandLoader::__construct() — Method in class ContainerCommandLoader

Create a new command loader instance.

ArtisanStarting::__construct() — Method in class ArtisanStarting

Create a new event instance.

CommandFinished::__construct() — Method in class CommandFinished

Create a new event instance.

CommandStarting::__construct() — Method in class CommandStarting

Create a new event instance.

ScheduledBackgroundTaskFinished::__construct() — Method in class ScheduledBackgroundTaskFinished

Create a new event instance.

ScheduledTaskFailed::__construct() — Method in class ScheduledTaskFailed

Create a new event instance.

ScheduledTaskFinished::__construct() — Method in class ScheduledTaskFinished

Create a new event instance.

ScheduledTaskSkipped::__construct() — Method in class ScheduledTaskSkipped

Create a new event instance.

ScheduledTaskStarting::__construct() — Method in class ScheduledTaskStarting

Create a new event instance.

GeneratorCommand::__construct() — Method in class GeneratorCommand

Create a new controller creator command instance.

OutputStyle::__construct() — Method in class OutputStyle

Create a new Console OutputStyle instance.

CacheEventMutex::__construct() — Method in class CacheEventMutex

Create a new overlapping strategy.

CacheSchedulingMutex::__construct() — Method in class CacheSchedulingMutex

Create a new scheduling strategy.

CallbackEvent::__construct() — Method in class CallbackEvent

Create a new event instance.

Event::__construct() — Method in class Event

Create a new event instance.

Schedule::__construct() — Method in class Schedule

Create a new schedule instance.

ScheduleRunCommand::__construct() — Method in class ScheduleRunCommand

Create a new command instance.

Signals::__construct() — Method in class Signals

Create a new signal registrar instance.

Component::__construct() — Method in class Component

Creates a new component instance.

Factory::__construct() — Method in class Factory

Creates a new factory instance.

Factory::__call() — Method in class Factory

Dynamically handle calls into the component instance.

EnsureDynamicContentIsHighlighted::__invoke() — Method in class EnsureDynamicContentIsHighlighted

Highlight dynamic content within the given string.

EnsureNoPunctuation::__invoke() — Method in class EnsureNoPunctuation

Ensures the given string does not end with punctuation.

EnsurePunctuation::__invoke() — Method in class EnsurePunctuation

Ensures the given string ends with punctuation.

EnsureRelativePaths::__invoke() — Method in class EnsureRelativePaths

Ensures the given string only contains relative paths.

Container::__get() — Method in class Container

Dynamically access container services.

Container::__set() — Method in class Container

Dynamically set container services.

ContextualBindingBuilder::__construct() — Method in class ContextualBindingBuilder

Create a new contextual binding builder.

RewindableGenerator::__construct() — Method in class RewindableGenerator

Create a new generator instance.

ModelIdentifier::__construct() — Method in class ModelIdentifier

Create a new model identifier.

EntityNotFoundException::__construct() — Method in class EntityNotFoundException

Create a new exception instance.

InvokableRule::__invoke() — Method in class InvokableRule

Run the validation rule.

AddQueuedCookiesToResponse::__construct() — Method in class AddQueuedCookiesToResponse

Create a new CookieQueue instance.

EncryptCookies::__construct() — Method in class EncryptCookies

Create a new CookieGuard instance.

Manager::__construct() — Method in class Manager

Create a new database capsule manager.

Manager::__callStatic() — Method in class Manager

Dynamically pass methods to the default connection.

ClassMorphViolationException::__construct() — Method in class ClassMorphViolationException

Create a new exception instance.

Connection::__construct() — Method in class Connection

Create a new database connection instance.

ConnectionResolver::__construct() — Method in class ConnectionResolver

Create a new connection resolver instance.

ConnectionFactory::__construct() — Method in class ConnectionFactory

Create a new connection factory instance.

DatabaseInspectionCommand::__construct() — Method in class DatabaseInspectionCommand

Create a new command instance.

InstallCommand::__construct() — Method in class InstallCommand

Create a new migration install command instance.

MigrateCommand::__construct() — Method in class MigrateCommand

Create a new migration command instance.

MigrateMakeCommand::__construct() — Method in class MigrateMakeCommand

Create a new migration install command instance.

ResetCommand::__construct() — Method in class ResetCommand

Create a new migration rollback command instance.

RollbackCommand::__construct() — Method in class RollbackCommand

Create a new migration rollback command instance.

StatusCommand::__construct() — Method in class StatusCommand

Create a new migration rollback command instance.

MonitorCommand::__construct() — Method in class MonitorCommand

Create a new command instance.

SeedCommand::__construct() — Method in class SeedCommand

Create a new database seed command instance.

DatabaseManager::__construct() — Method in class DatabaseManager

Create a new database manager instance.

DatabaseManager::__call() — Method in class DatabaseManager

Dynamically pass methods to the default connection.

DatabaseTransactionRecord::__construct() — Method in class DatabaseTransactionRecord

Create a new database transaction record instance.

DatabaseTransactionsManager::__construct() — Method in class DatabaseTransactionsManager

Create a new database transactions manager instance.

BroadcastableModelEventOccurred::__construct() — Method in class BroadcastableModelEventOccurred

Create a new event instance.

Builder::__construct() — Method in class Builder

Create a new Eloquent query builder instance.

Builder::__get() — Method in class Builder

Dynamically access builder proxies.

Builder::__call() — Method in class Builder

Dynamically handle calls into the query instance.

Builder::__callStatic() — Method in class Builder

Dynamically handle calls into the query instance.

Builder::__clone() — Method in class Builder

Force a clone of the underlying query builder when cloning.

AsEnumArrayObject::__construct() — Method in class AsEnumArrayObject
AsEnumCollection::__construct() — Method in class AsEnumCollection
Attribute::__construct() — Method in class Attribute

Create a new attribute accessor / mutator.

BelongsToManyRelationship::__construct() — Method in class BelongsToManyRelationship

Create a new attached relationship definition.

BelongsToRelationship::__construct() — Method in class BelongsToRelationship

Create a new "belongs to" relationship definition.

CrossJoinSequence::__construct() — Method in class CrossJoinSequence

Create a new cross join sequence instance.

Factory::__construct() — Method in class Factory

Create a new factory instance.

Factory::__call() — Method in class Factory

Proxy dynamic factory methods onto their proper methods.

Relationship::__construct() — Method in class Relationship

Create a new child relationship instance.

Sequence::__construct() — Method in class Sequence

Create a new sequence instance.

Sequence::__invoke() — Method in class Sequence

Get the next value in the sequence.

HigherOrderBuilderProxy::__construct() — Method in class HigherOrderBuilderProxy

Create a new proxy instance.

HigherOrderBuilderProxy::__call() — Method in class HigherOrderBuilderProxy

Proxy a scope call onto the query builder.

InvalidCastException::__construct() — Method in class InvalidCastException

Create a new exception instance.

MissingAttributeException::__construct() — Method in class MissingAttributeException

Create a new missing attribute exception instance.

Model::__construct() — Method in class Model

Create a new Eloquent model instance.

Model::__get() — Method in class Model

Dynamically retrieve attributes on the model.

Model::__set() — Method in class Model

Dynamically set attributes on the model.

Model::__isset() — Method in class Model

Determine if an attribute or relation exists on the model.

Model::__unset() — Method in class Model

Unset an attribute on the model.

Model::__call() — Method in class Model

Handle dynamic method calls into the model.

Model::__callStatic() — Method in class Model

Handle dynamic static method calls into the model.

Model::__toString() — Method in class Model

Convert the model to its string representation.

Model::__sleep() — Method in class Model

Prepare the object for serialization.

Model::__wakeup() — Method in class Model

When a model is being unserialized, check if it needs to be booted.

PendingHasThroughRelationship::__construct() — Method in class PendingHasThroughRelationship

Create a pending has-many-through or has-one-through relationship.

PendingHasThroughRelationship::__call() — Method in class PendingHasThroughRelationship

Handle dynamic method calls into the model.

BelongsTo::__construct() — Method in class BelongsTo

Create a new belongs to relationship instance.

BelongsToMany::__construct() — Method in class BelongsToMany

Create a new belongs to many relationship instance.

HasManyThrough::__construct() — Method in class HasManyThrough

Create a new has many through relationship instance.

HasOneOrMany::__construct() — Method in class HasOneOrMany

Create a new has one or many relationship instance.

MorphOneOrMany::__construct() — Method in class MorphOneOrMany

Create a new morph one or many relationship instance.

MorphTo::__construct() — Method in class MorphTo

Create a new morph to relationship instance.

MorphTo::__call() — Method in class MorphTo

Handle dynamic method calls to the relationship.

MorphToMany::__construct() — Method in class MorphToMany

Create a new morph to many relationship instance.

Relation::__construct() — Method in class Relation

Create a new relation instance.

Relation::__call() — Method in class Relation

Handle dynamic method calls to the relationship.

Relation::__clone() — Method in class Relation

Force a clone of the underlying query builder when cloning.

ConnectionEvent::__construct() — Method in class ConnectionEvent

Create a new event instance.

DatabaseBusy::__construct() — Method in class DatabaseBusy

Create a new event instance.

MigrationEvent::__construct() — Method in class MigrationEvent

Create a new event instance.

MigrationsEvent::__construct() — Method in class MigrationsEvent

Create a new event instance.

ModelsPruned::__construct() — Method in class ModelsPruned

Create a new event instance.

NoPendingMigrations::__construct() — Method in class NoPendingMigrations

Create a new event instance.

QueryExecuted::__construct() — Method in class QueryExecuted

Create a new event instance.

SchemaDumped::__construct() — Method in class SchemaDumped

Create a new event instance.

SchemaLoaded::__construct() — Method in class SchemaLoaded

Create a new event instance.

StatementPrepared::__construct() — Method in class StatementPrepared

Create a new event instance.

LazyLoadingViolationException::__construct() — Method in class LazyLoadingViolationException

Create a new exception instance.

DatabaseMigrationRepository::__construct() — Method in class DatabaseMigrationRepository

Create a new database migration repository instance.

MigrationCreator::__construct() — Method in class MigrationCreator

Create a new migration creator instance.

Migrator::__construct() — Method in class Migrator

Create a new migrator instance.

MultipleRecordsFoundException::__construct() — Method in class MultipleRecordsFoundException

Create a new exception instance.

Connection::__construct() — Method in class Connection

Create a new PDO connection instance.

SqlServerConnection::__construct() — Method in class SqlServerConnection

Create a new SQL Server connection instance.

QueryException::__construct() — Method in class QueryException

Create a new query exception instance.

Builder::__construct() — Method in class Builder

Create a new query builder instance.

Builder::__call() — Method in class Builder

Handle dynamic method calls into the method.

Expression::__construct() — Method in class Expression

Create a new raw query expression.

IndexHint::__construct() — Method in class IndexHint

Create a new index hint instance.

JoinClause::__construct() — Method in class JoinClause

Create a new join clause instance.

SQLiteConnection::__construct() — Method in class SQLiteConnection

Create a new database connection instance.

SQLiteDatabaseDoesNotExistException::__construct() — Method in class SQLiteDatabaseDoesNotExistException

Create a new exception instance.

Blueprint::__construct() — Method in class Blueprint

Create a new schema blueprint.

Builder::__construct() — Method in class Builder

Create a new database Schema manager.

ForeignIdColumnDefinition::__construct() — Method in class ForeignIdColumnDefinition

Create a new foreign ID column definition.

SchemaState::__construct() — Method in class SchemaState

Create a new dumper instance.

Seeder::__invoke() — Method in class Seeder

Run the database seeds.

Encrypter::__construct() — Method in class Encrypter

Create a new encrypter instance.

MissingAppKeyException::__construct() — Method in class MissingAppKeyException

Create a new exception instance.

CallQueuedListener::__construct() — Method in class CallQueuedListener

Create a new job instance.

CallQueuedListener::__clone() — Method in class CallQueuedListener

Prepare the instance for cloning.

Dispatcher::__construct() — Method in class Dispatcher

Create a new event dispatcher instance.

NullDispatcher::__construct() — Method in class NullDispatcher

Create a new event dispatcher instance that does not fire.

NullDispatcher::__call() — Method in class NullDispatcher

Dynamically pass method calls to the underlying dispatcher.

QueuedClosure::__construct() — Method in class QueuedClosure

Create a new queued closure event listener resolver.

AwsS3V3Adapter::__construct() — Method in class AwsS3V3Adapter

Create a new AwsS3V3FilesystemAdapter instance.

FilesystemAdapter::__construct() — Method in class FilesystemAdapter

Create a new filesystem adapter instance.

FilesystemAdapter::__call() — Method in class FilesystemAdapter

Pass dynamic methods call onto Flysystem.

FilesystemManager::__construct() — Method in class FilesystemManager

Create a new filesystem manager instance.

FilesystemManager::__call() — Method in class FilesystemManager

Dynamically call the default driver instance.

LockableFile::__construct() — Method in class LockableFile

Create a new File instance.

Application::__construct() — Method in class Application

Create a new Illuminate application instance.

PendingChain::__construct() — Method in class PendingChain

Create a new PendingChain instance.

PendingDispatch::__construct() — Method in class PendingDispatch

Create a new pending job dispatch.

PendingDispatch::__call() — Method in class PendingDispatch

Dynamically proxy methods to the underlying job.

PendingDispatch::__destruct() — Method in class PendingDispatch

Handle the object's destruction.

CacheBasedMaintenanceMode::__construct() — Method in class CacheBasedMaintenanceMode

Create a new cache based maintenance mode implementation.

AboutCommand::__construct() — Method in class AboutCommand

Create a new command instance.

CliDumper::__construct() — Method in class CliDumper

Create a new CLI dumper instance.

ClosureCommand::__construct() — Method in class ClosureCommand

Create a new command instance.

ConfigCacheCommand::__construct() — Method in class ConfigCacheCommand

Create a new config cache command instance.

ConfigClearCommand::__construct() — Method in class ConfigClearCommand

Create a new config clear command instance.

EnvironmentDecryptCommand::__construct() — Method in class EnvironmentDecryptCommand

Create a new command instance.

EnvironmentEncryptCommand::__construct() — Method in class EnvironmentEncryptCommand

Create a new command instance.

EventClearCommand::__construct() — Method in class EventClearCommand

Create a new config clear command instance.

Kernel::__construct() — Method in class Kernel

Create a new console kernel instance.

QueuedCommand::__construct() — Method in class QueuedCommand

Create a new job instance.

RouteCacheCommand::__construct() — Method in class RouteCacheCommand

Create a new route command instance.

RouteClearCommand::__construct() — Method in class RouteClearCommand

Create a new route clear command instance.

RouteListCommand::__construct() — Method in class RouteListCommand

Create a new route command instance.

VendorPublishCommand::__construct() — Method in class VendorPublishCommand

Create a new command instance.

ViewClearCommand::__construct() — Method in class ViewClearCommand

Create a new config clear command instance.

LocaleUpdated::__construct() — Method in class LocaleUpdated

Create a new event instance.

PublishingStubs::__construct() — Method in class PublishingStubs

Create a new event instance.

VendorTagPublished::__construct() — Method in class VendorTagPublished

Create a new event instance.

Handler::__construct() — Method in class Handler

Create a new exception handler instance.

RegisterErrorViewPaths::__invoke() — Method in class RegisterErrorViewPaths

Register the error view paths.

ReportableHandler::__construct() — Method in class ReportableHandler

Create a new reportable handler instance.

ReportableHandler::__invoke() — Method in class ReportableHandler

Invoke the handler.

RequestHandled::__construct() — Method in class RequestHandled

Create a new event instance.

HtmlDumper::__construct() — Method in class HtmlDumper

Create a new HTML dumper instance.

Kernel::__construct() — Method in class Kernel

Create a new HTTP kernel instance.

HandlePrecognitiveRequests::__construct() — Method in class HandlePrecognitiveRequests

Create a new middleware instance.

PreventRequestsDuringMaintenance::__construct() — Method in class PreventRequestsDuringMaintenance

Create a new middleware instance.

VerifyCsrfToken::__construct() — Method in class VerifyCsrfToken

Create a new middleware instance.

Mix::__invoke() — Method in class Mix

Get the path to a versioned Mix file.

PackageManifest::__construct() — Method in class PackageManifest

Create a new package manifest instance.

ProviderRepository::__construct() — Method in class ProviderRepository

Create a new service repository instance.

RouteServiceProvider::__call() — Method in class RouteServiceProvider

Pass dynamic methods onto the router instance.

InteractsWithContainer::__invoke() — Method in class InteractsWithContainer
InteractsWithContainer::__call() — Method in class InteractsWithContainer
InteractsWithContainer::__toString() — Method in class InteractsWithContainer
InteractsWithExceptionHandling::__construct() — Method in class InteractsWithExceptionHandling

Create a new class instance.

Wormhole::__construct() — Method in class Wormhole

Create a new wormhole instance.

Vite::__invoke() — Method in class Vite

Generate Vite tags for an entrypoint.

ArgonHasher::__construct() — Method in class ArgonHasher

Create a new hasher instance.

BcryptHasher::__construct() — Method in class BcryptHasher

Create a new hasher instance.

ConnectionFailed::__construct() — Method in class ConnectionFailed

Create a new event instance.

RequestSending::__construct() — Method in class RequestSending

Create a new event instance.

ResponseReceived::__construct() — Method in class ResponseReceived

Create a new event instance.

Factory::__construct() — Method in class Factory

Create a new factory instance.

Factory::__call() — Method in class Factory

Execute a method against a new pending request instance.

PendingRequest::__construct() — Method in class PendingRequest

Create a new HTTP Client instance.

Pool::__construct() — Method in class Pool

Create a new requests pool.

Pool::__call() — Method in class Pool

Add a request to the pool with a numeric index.

Request::__construct() — Method in class Request

Create a new request instance.

RequestException::__construct() — Method in class RequestException

Create a new exception instance.

Response::__construct() — Method in class Response

Create a new response instance.

Response::__toString() — Method in class Response

Get the body of the response.

Response::__call() — Method in class Response

Dynamically proxy other methods to the underlying response.

ResponseSequence::__construct() — Method in class ResponseSequence

Create a new response sequence.

ResponseSequence::__invoke() — Method in class ResponseSequence

Get the next response in the sequence.

HttpResponseException::__construct() — Method in class HttpResponseException

Create a new HTTP response exception instance.

PostTooLargeException::__construct() — Method in class PostTooLargeException

Create a new "post too large" exception instance.

ThrottleRequestsException::__construct() — Method in class ThrottleRequestsException

Create a new throttle requests exception instance.

JsonResponse::__construct() — Method in class JsonResponse
Constructor.
HandleCors::__construct() — Method in class HandleCors

Create a new middleware instance.

TrustHosts::__construct() — Method in class TrustHosts

Create a new middleware instance.

RedirectResponse::__call() — Method in class RedirectResponse

Dynamically bind flash data in the session.

Request::__isset() — Method in class Request

Check if an input element is set on the request.

Request::__get() — Method in class Request

Get an input element from the request.

DelegatesToResource::__isset() — Method in class DelegatesToResource

Determine if an attribute exists on the resource.

DelegatesToResource::__unset() — Method in class DelegatesToResource

Unset an attribute on the resource.

DelegatesToResource::__get() — Method in class DelegatesToResource

Dynamically get properties from the underlying resource.

DelegatesToResource::__call() — Method in class DelegatesToResource

Dynamically pass method calls to the underlying resource.

AnonymousResourceCollection::__construct() — Method in class AnonymousResourceCollection

Create a new anonymous resource collection.

JsonResource::__construct() — Method in class JsonResource

Create a new resource instance.

ResourceCollection::__construct() — Method in class ResourceCollection

Create a new resource instance.

ResourceResponse::__construct() — Method in class ResourceResponse

Create a new resource response.

MergeValue::__construct() — Method in class MergeValue

Create a new merge value instance.

Response::__construct() — Method in class Response

Create a new HTTP response.

File::__construct() — Method in class File

Create a new file instance.

MessageLogged::__construct() — Method in class MessageLogged

Create a new event instance.

LogManager::__construct() — Method in class LogManager

Create a new Log manager instance.

LogManager::__call() — Method in class LogManager

Dynamically call the default driver instance.

Logger::__construct() — Method in class Logger

Create a new log writer instance.

Logger::__call() — Method in class Logger

Dynamically proxy method calls to the underlying logger.

MessageSending::__construct() — Method in class MessageSending

Create a new event instance.

MessageSent::__construct() — Method in class MessageSent

Create a new event instance.

MessageSent::__serialize() — Method in class MessageSent

Get the serializable representation of the object.

MessageSent::__unserialize() — Method in class MessageSent

Marshal the object from its serialized data.

MessageSent::__get() — Method in class MessageSent

Dynamically get the original message.

MailManager::__construct() — Method in class MailManager

Create a new Mail manager instance.

MailManager::__call() — Method in class MailManager

Dynamically call the default driver instance.

Mailable::__call() — Method in class Mailable

Dynamically bind parameters to the message.

Address::__construct() — Method in class Address

Create a new address instance.

Content::__construct() — Method in class Content

Create a new content definition.

Envelope::__construct() — Method in class Envelope

Create a new message envelope instance.

Headers::__construct() — Method in class Headers

Create a new instance of headers for a message.

Mailer::__construct() — Method in class Mailer

Create a new Mailer instance.

Markdown::__construct() — Method in class Markdown

Create a new Markdown renderer instance.

Message::__construct() — Method in class Message

Create a new message instance.

Message::__call() — Method in class Message

Dynamically pass missing methods to the Symfony instance.

PendingMail::__construct() — Method in class PendingMail

Create a new mailable mailer instance.

SendQueuedMailable::__construct() — Method in class SendQueuedMailable

Create a new job instance.

SendQueuedMailable::__clone() — Method in class SendQueuedMailable

Prepare the instance for cloning.

SentMessage::__construct() — Method in class SentMessage

Create a new SentMessage instance.

SentMessage::__call() — Method in class SentMessage

Dynamically pass missing methods to the Symfony instance.

ArrayTransport::__construct() — Method in class ArrayTransport

Create a new array transport instance.

ArrayTransport::__toString() — Method in class ArrayTransport

Get the string representation of the transport.

LogTransport::__construct() — Method in class LogTransport

Create a new log transport instance.

LogTransport::__toString() — Method in class LogTransport

Get the string representation of the transport.

SesTransport::__construct() — Method in class SesTransport

Create a new SES transport instance.

SesTransport::__toString() — Method in class SesTransport

Get the string representation of the transport.

SesV2Transport::__construct() — Method in class SesV2Transport

Create a new SES V2 transport instance.

SesV2Transport::__toString() — Method in class SesV2Transport

Get the string representation of the transport.

Action::__construct() — Method in class Action

Create a new action instance.

BroadcastChannel::__construct() — Method in class BroadcastChannel

Create a new broadcast channel.

MailChannel::__construct() — Method in class MailChannel

Create a new mail channel instance.

NotificationTableCommand::__construct() — Method in class NotificationTableCommand

Create a new notifications table command instance.

BroadcastNotificationCreated::__construct() — Method in class BroadcastNotificationCreated

Create a new event instance.

NotificationFailed::__construct() — Method in class NotificationFailed

Create a new event instance.

NotificationSending::__construct() — Method in class NotificationSending

Create a new event instance.

NotificationSent::__construct() — Method in class NotificationSent

Create a new event instance.

BroadcastMessage::__construct() — Method in class BroadcastMessage

Create a new message instance.

DatabaseMessage::__construct() — Method in class DatabaseMessage

Create a new database message.

NotificationSender::__construct() — Method in class NotificationSender

Create a new notification sender instance.

SendQueuedNotifications::__construct() — Method in class SendQueuedNotifications

Create a new job instance.

SendQueuedNotifications::__clone() — Method in class SendQueuedNotifications

Prepare the instance for cloning.

AbstractCursorPaginator::__call() — Method in class AbstractCursorPaginator

Make dynamic calls into the collection.

AbstractCursorPaginator::__toString() — Method in class AbstractCursorPaginator

Render the contents of the paginator when casting to a string.

AbstractPaginator::__call() — Method in class AbstractPaginator

Make dynamic calls into the collection.

AbstractPaginator::__toString() — Method in class AbstractPaginator

Render the contents of the paginator when casting to a string.

Cursor::__construct() — Method in class Cursor

Create a new cursor instance.

CursorPaginator::__construct() — Method in class CursorPaginator

Create a new paginator instance.

LengthAwarePaginator::__construct() — Method in class LengthAwarePaginator

Create a new paginator instance.

Paginator::__construct() — Method in class Paginator

Create a new paginator instance.

UrlWindow::__construct() — Method in class UrlWindow

Create a new URL window instance.

Hub::__construct() — Method in class Hub

Create a new Hub instance.

Pipeline::__construct() — Method in class Pipeline

Create a new class instance.

ProcessFailedException::__construct() — Method in class ProcessFailedException

Create a new exception instance.

ProcessTimedOutException::__construct() — Method in class ProcessTimedOutException

Create a new exception instance.

Factory::__call() — Method in class Factory

Dynamically proxy methods to a new pending process instance.

FakeInvokedProcess::__construct() — Method in class FakeInvokedProcess

Create a new invoked process instance.

FakeProcessResult::__construct() — Method in class FakeProcessResult

Create a new process result instance.

FakeProcessSequence::__construct() — Method in class FakeProcessSequence

Create a new fake process sequence instance.

FakeProcessSequence::__invoke() — Method in class FakeProcessSequence

Get the next process in the sequence.

InvokedProcess::__construct() — Method in class InvokedProcess

Create a new invoked process instance.

InvokedProcessPool::__construct() — Method in class InvokedProcessPool

Create a new invoked process pool.

PendingProcess::__construct() — Method in class PendingProcess

Create a new pending process instance.

Pool::__construct() — Method in class Pool

Create a new process pool.

Pool::__call() — Method in class Pool

Dynamically proxy methods calls to a new pending process.

ProcessPoolResults::__construct() — Method in class ProcessPoolResults

Create a new process pool result set.

ProcessResult::__construct() — Method in class ProcessResult

Create a new process result instance.

BeanstalkdQueue::__construct() — Method in class BeanstalkdQueue

Create a new Beanstalkd queue instance.

CallQueuedClosure::__construct() — Method in class CallQueuedClosure

Create a new job instance.

CallQueuedHandler::__construct() — Method in class CallQueuedHandler

Create a new handler instance.

Manager::__construct() — Method in class Manager

Create a new queue capsule manager.

Manager::__call() — Method in class Manager

Pass dynamic instance methods to the manager.

Manager::__callStatic() — Method in class Manager

Dynamically pass methods to the default connection.

DatabaseConnector::__construct() — Method in class DatabaseConnector

Create a new connector instance.

RedisConnector::__construct() — Method in class RedisConnector

Create a new Redis queue connector instance.

BatchesTableCommand::__construct() — Method in class BatchesTableCommand

Create a new batched queue jobs table command instance.

FailedTableCommand::__construct() — Method in class FailedTableCommand

Create a new failed queue jobs table command instance.

ListenCommand::__construct() — Method in class ListenCommand

Create a new queue listen command.

MonitorCommand::__construct() — Method in class MonitorCommand

Create a new queue monitor command.

RestartCommand::__construct() — Method in class RestartCommand

Create a new queue restart command.

TableCommand::__construct() — Method in class TableCommand

Create a new queue job table command instance.

WorkCommand::__construct() — Method in class WorkCommand

Create a new queue work command.

DatabaseQueue::__construct() — Method in class DatabaseQueue

Create a new database queue instance.

JobExceptionOccurred::__construct() — Method in class JobExceptionOccurred

Create a new event instance.

JobFailed::__construct() — Method in class JobFailed

Create a new event instance.

JobPopped::__construct() — Method in class JobPopped

Create a new event instance.

JobPopping::__construct() — Method in class JobPopping

Create a new event instance.

JobProcessed::__construct() — Method in class JobProcessed

Create a new event instance.

JobProcessing::__construct() — Method in class JobProcessing

Create a new event instance.

JobQueued::__construct() — Method in class JobQueued

Create a new event instance.

JobReleasedAfterException::__construct() — Method in class JobReleasedAfterException

Create a new event instance.

JobRetryRequested::__construct() — Method in class JobRetryRequested

Create a new event instance.

Looping::__construct() — Method in class Looping

Create a new event instance.

QueueBusy::__construct() — Method in class QueueBusy

Create a new event instance.

WorkerStopping::__construct() — Method in class WorkerStopping

Create a new event instance.

DatabaseFailedJobProvider::__construct() — Method in class DatabaseFailedJobProvider

Create a new database failed job provider.

DatabaseUuidFailedJobProvider::__construct() — Method in class DatabaseUuidFailedJobProvider

Create a new database failed job provider.

DynamoDbFailedJobProvider::__construct() — Method in class DynamoDbFailedJobProvider

Create a new DynamoDb failed job provider.

InvalidPayloadException::__construct() — Method in class InvalidPayloadException

Create a new exception instance.

BeanstalkdJob::__construct() — Method in class BeanstalkdJob

Create a new job instance.

DatabaseJob::__construct() — Method in class DatabaseJob

Create a new job instance.

DatabaseJobRecord::__construct() — Method in class DatabaseJobRecord

Create a new job record instance.

DatabaseJobRecord::__get() — Method in class DatabaseJobRecord

Dynamically access the underlying job information.

RedisJob::__construct() — Method in class RedisJob

Create a new job instance.

SqsJob::__construct() — Method in class SqsJob

Create a new job instance.

SyncJob::__construct() — Method in class SyncJob

Create a new job instance.

Listener::__construct() — Method in class Listener

Create a new queue listener.

ListenerOptions::__construct() — Method in class ListenerOptions

Create a new listener options instance.

RateLimited::__construct() — Method in class RateLimited

Create a new middleware instance.

RateLimited::__sleep() — Method in class RateLimited

Prepare the object for serialization.

RateLimited::__wakeup() — Method in class RateLimited

Prepare the object after unserialization.

RateLimitedWithRedis::__construct() — Method in class RateLimitedWithRedis

Create a new middleware instance.

RateLimitedWithRedis::__wakeup() — Method in class RateLimitedWithRedis

Prepare the object after unserialization.

ThrottlesExceptions::__construct() — Method in class ThrottlesExceptions

Create a new middleware instance.

WithoutOverlapping::__construct() — Method in class WithoutOverlapping

Create a new middleware instance.

QueueManager::__construct() — Method in class QueueManager

Create a new queue manager instance.

QueueManager::__call() — Method in class QueueManager

Dynamically pass calls to the default connection.

RedisQueue::__construct() — Method in class RedisQueue

Create a new Redis queue instance.

SerializesModels::__serialize() — Method in class SerializesModels

Prepare the instance values for serialization.

SerializesModels::__unserialize() — Method in class SerializesModels

Restore the model after serialization.

SqsQueue::__construct() — Method in class SqsQueue

Create a new Amazon SQS queue instance.

Worker::__construct() — Method in class Worker

Create a new queue worker.

WorkerOptions::__construct() — Method in class WorkerOptions

Create a new worker options instance.

Connection::__call() — Method in class Connection

Pass other method calls down to the underlying client.

PhpRedisConnection::__construct() — Method in class PhpRedisConnection

Create a new PhpRedis connection.

PhpRedisConnection::__call() — Method in class PhpRedisConnection

Pass other method calls down to the underlying client.

PredisConnection::__construct() — Method in class PredisConnection

Create a new Predis connection.

CommandExecuted::__construct() — Method in class CommandExecuted

Create a new event instance.

ConcurrencyLimiter::__construct() — Method in class ConcurrencyLimiter

Create a new concurrency limiter instance.

ConcurrencyLimiterBuilder::__construct() — Method in class ConcurrencyLimiterBuilder

Create a new builder instance.

DurationLimiter::__construct() — Method in class DurationLimiter

Create a new duration limiter instance.

DurationLimiterBuilder::__construct() — Method in class DurationLimiterBuilder

Create a new builder instance.

RedisManager::__construct() — Method in class RedisManager

Create a new Redis manager instance.

RedisManager::__call() — Method in class RedisManager

Pass methods onto the default Redis connection.

CallableDispatcher::__construct() — Method in class CallableDispatcher

Create a new callable dispatcher instance.

CompiledRouteCollection::__construct() — Method in class CompiledRouteCollection

Create a new CompiledRouteCollection instance.

Controller::__call() — Method in class Controller

Handle calls to missing methods on the controller.

ControllerDispatcher::__construct() — Method in class ControllerDispatcher

Create a new controller dispatcher instance.

ControllerMiddlewareOptions::__construct() — Method in class ControllerMiddlewareOptions

Create a new middleware option instance.

Middleware::__construct() — Method in class Middleware

Create a new controller middleware definition.

RouteMatched::__construct() — Method in class RouteMatched

Create a new event instance.

Routing::__construct() — Method in class Routing

Create a new event instance.

BackedEnumCaseNotFoundException::__construct() — Method in class BackedEnumCaseNotFoundException

Create a new exception instance.

InvalidSignatureException::__construct() — Method in class InvalidSignatureException

Create a new exception instance.

StreamedResponseException::__construct() — Method in class StreamedResponseException

Create a new exception instance.

SubstituteBindings::__construct() — Method in class SubstituteBindings

Create a new bindings substitutor.

ThrottleRequests::__construct() — Method in class ThrottleRequests

Create a new request throttler.

ThrottleRequestsWithRedis::__construct() — Method in class ThrottleRequestsWithRedis

Create a new request throttler.

PendingResourceRegistration::__construct() — Method in class PendingResourceRegistration

Create a new pending resource registration instance.

PendingResourceRegistration::__destruct() — Method in class PendingResourceRegistration

Handle the object's destruction.

PendingSingletonResourceRegistration::__construct() — Method in class PendingSingletonResourceRegistration

Create a new pending singleton resource registration instance.

PendingSingletonResourceRegistration::__destruct() — Method in class PendingSingletonResourceRegistration

Handle the object's destruction.

RedirectController::__invoke() — Method in class RedirectController

Invoke the controller method.

Redirector::__construct() — Method in class Redirector

Create a new Redirector instance.

ResourceRegistrar::__construct() — Method in class ResourceRegistrar

Create a new resource registrar instance.

ResponseFactory::__construct() — Method in class ResponseFactory

Create a new response factory instance.

Route::__construct() — Method in class Route

Create a new Route instance.

Route::__get() — Method in class Route

Dynamically access route parameters.

RouteFileRegistrar::__construct() — Method in class RouteFileRegistrar

Create a new route file registrar instance.

RouteParameterBinder::__construct() — Method in class RouteParameterBinder

Create a new Route parameter binder instance.

RouteRegistrar::__construct() — Method in class RouteRegistrar

Create a new route registrar instance.

RouteRegistrar::__call() — Method in class RouteRegistrar

Dynamically handle calls into the route registrar.

RouteUri::__construct() — Method in class RouteUri

Create a new route URI instance.

RouteUrlGenerator::__construct() — Method in class RouteUrlGenerator

Create a new Route URL generator.

Router::__construct() — Method in class Router

Create a new Router instance.

Router::__call() — Method in class Router

Dynamically handle calls into the router instance.

SortedMiddleware::__construct() — Method in class SortedMiddleware

Create a new Sorted Middleware container.

UrlGenerator::__construct() — Method in class UrlGenerator

Create a new URL Generator instance.

ViewController::__construct() — Method in class ViewController

Create a new controller instance.

ViewController::__invoke() — Method in class ViewController

Invoke the controller method.

ArraySessionHandler::__construct() — Method in class ArraySessionHandler

Create a new array driven handler instance.

CacheBasedSessionHandler::__construct() — Method in class CacheBasedSessionHandler

Create a new cache driven handler instance.

SessionTableCommand::__construct() — Method in class SessionTableCommand

Create a new session table command instance.

CookieSessionHandler::__construct() — Method in class CookieSessionHandler

Create a new cookie driven handler instance.

DatabaseSessionHandler::__construct() — Method in class DatabaseSessionHandler

Create a new database session handler instance.

EncryptedStore::__construct() — Method in class EncryptedStore

Create a new session instance.

FileSessionHandler::__construct() — Method in class FileSessionHandler

Create a new file driven handler instance.

AuthenticateSession::__construct() — Method in class AuthenticateSession

Create a new middleware instance.

StartSession::__construct() — Method in class StartSession

Create a new session middleware.

Store::__construct() — Method in class Store

Create a new session instance.

SymfonySessionDecorator::__construct() — Method in class SymfonySessionDecorator

Create a new session decorator.

Collection::__construct() — Method in class Collection

Create a new collection.

Composer::__construct() — Method in class Composer

Create a new Composer manager instance.

DateFactory::__call() — Method in class DateFactory

Handle dynamic calls to generate dates.

Enumerable::__toString() — Method in class Enumerable

Convert the collection to its string representation.

Enumerable::__get() — Method in class Enumerable

Dynamically access collection proxies.

Facade::__callStatic() — Method in class Facade

Handle dynamic, static calls to the object.

Fluent::__construct() — Method in class Fluent

Create a new fluent instance.

Fluent::__call() — Method in class Fluent

Handle dynamic calls to the fluent instance to set attributes.

Fluent::__get() — Method in class Fluent

Dynamically retrieve the value of an attribute.

Fluent::__set() — Method in class Fluent

Dynamically set the value of an attribute.

Fluent::__isset() — Method in class Fluent

Dynamically check if an attribute is set.

Fluent::__unset() — Method in class Fluent

Dynamically unset an attribute.

HigherOrderCollectionProxy::__construct() — Method in class HigherOrderCollectionProxy

Create a new proxy instance.

HigherOrderCollectionProxy::__get() — Method in class HigherOrderCollectionProxy

Proxy accessing an attribute onto the collection items.

HigherOrderCollectionProxy::__call() — Method in class HigherOrderCollectionProxy

Proxy a method call onto the collection items.

HigherOrderTapProxy::__construct() — Method in class HigherOrderTapProxy

Create a new tap proxy instance.

HigherOrderTapProxy::__call() — Method in class HigherOrderTapProxy

Dynamically pass method calls to the target.

HigherOrderWhenProxy::__construct() — Method in class HigherOrderWhenProxy

Create a new proxy instance.

HigherOrderWhenProxy::__get() — Method in class HigherOrderWhenProxy

Proxy accessing an attribute onto the target.

HigherOrderWhenProxy::__call() — Method in class HigherOrderWhenProxy

Proxy a method call on the target.

HtmlString::__construct() — Method in class HtmlString

Create a new HTML string instance.

HtmlString::__toString() — Method in class HtmlString

Get the HTML string.

Js::__construct() — Method in class Js

Create a new class instance.

Js::__toString() — Method in class Js

Get the string representation of the data for use in HTML.

LazyCollection::__construct() — Method in class LazyCollection
Lottery::__construct() — Method in class Lottery

Create a new Lottery instance.

Lottery::__invoke() — Method in class Lottery

Run the lottery.

Manager::__construct() — Method in class Manager

Create a new manager instance.

Manager::__call() — Method in class Manager

Dynamically call the default driver instance.

MessageBag::__construct() — Method in class MessageBag

Create a new message bag instance.

MessageBag::__toString() — Method in class MessageBag

Convert the message bag to its string representation.

MultipleInstanceManager::__construct() — Method in class MultipleInstanceManager

Create a new manager instance.

MultipleInstanceManager::__call() — Method in class MultipleInstanceManager

Dynamically call the default instance.

MultipleItemsFoundException::__construct() — Method in class MultipleItemsFoundException

Create a new exception instance.

Optional::__construct() — Method in class Optional

Create a new optional instance.

Optional::__get() — Method in class Optional

Dynamically access a property on the underlying object.

Optional::__isset() — Method in class Optional

Dynamically check a property exists on the underlying object.

Optional::__call() — Method in class Optional

Dynamically pass a method to the underlying object.

ServiceProvider::__construct() — Method in class ServiceProvider

Create a new service provider instance.

Stringable::__construct() — Method in class Stringable

Create a new instance of the class.

Stringable::__get() — Method in class Stringable

Proxy dynamic properties onto methods.

Stringable::__toString() — Method in class Stringable

Get the raw string value.

BatchFake::__construct() — Method in class BatchFake

Create a new batch instance.

BusFake::__construct() — Method in class BusFake

Create a new bus fake instance.

EventFake::__construct() — Method in class EventFake

Create a new event fake instance.

EventFake::__call() — Method in class EventFake

Handle dynamic method calls to the dispatcher.

MailFake::__construct() — Method in class MailFake

Create a new mail fake.

MailFake::__call() — Method in class MailFake

Handle dynamic method calls to the mailer.

PendingBatchFake::__construct() — Method in class PendingBatchFake

Create a new pending batch instance.

PendingChainFake::__construct() — Method in class PendingChainFake

Create a new pending chain instance.

PendingMailFake::__construct() — Method in class PendingMailFake

Create a new instance.

QueueFake::__construct() — Method in class QueueFake

Create a new fake queue instance.

QueueFake::__call() — Method in class QueueFake

Override the QueueManager to prevent circular dependency.

EnumeratesValues::__toString() — Method in class EnumeratesValues

Convert the collection to its string representation.

EnumeratesValues::__get() — Method in class EnumeratesValues

Dynamically access collection proxies.

Macroable::__callStatic() — Method in class Macroable

Dynamically handle calls to the class.

Macroable::__call() — Method in class Macroable

Dynamically handle calls to the class.

ValidatedInput::__construct() — Method in class ValidatedInput

Create a new validated input container.

ValidatedInput::__get() — Method in class ValidatedInput

Dynamically access input data.

ValidatedInput::__set() — Method in class ValidatedInput

Dynamically set input data.

ValidatedInput::__isset() — Method in class ValidatedInput

Determine if an input key is set.

ValidatedInput::__unset() — Method in class ValidatedInput

Remove an input key.

ViewErrorBag::__call() — Method in class ViewErrorBag

Dynamically call methods on the default bag.

ViewErrorBag::__get() — Method in class ViewErrorBag

Dynamically access a view error bag.

ViewErrorBag::__set() — Method in class ViewErrorBag

Dynamically set a view error bag.

ViewErrorBag::__toString() — Method in class ViewErrorBag

Convert the default bag to its string representation.

AssertableJsonString::__construct() — Method in class AssertableJsonString

Create a new assertable JSON string instance.

RunsInParallel::__construct() — Method in class RunsInParallel

Creates a new test runner instance.

ArraySubset::__construct() — Method in class ArraySubset

Create a new array subset constraint instance.

CountInDatabase::__construct() — Method in class CountInDatabase

Create a new constraint instance.

HasInDatabase::__construct() — Method in class HasInDatabase

Create a new constraint instance.

NotSoftDeletedInDatabase::__construct() — Method in class NotSoftDeletedInDatabase

Create a new constraint instance.

SeeInOrder::__construct() — Method in class SeeInOrder

Create a new constraint instance.

SoftDeletedInDatabase::__construct() — Method in class SoftDeletedInDatabase

Create a new constraint instance.

AssertableJson::__construct() — Method in class AssertableJson

Create a new fluent, assertable JSON data instance.

ParallelConsoleOutput::__construct() — Method in class ParallelConsoleOutput

Create a new Parallel ConsoleOutput instance.

ParallelTesting::__construct() — Method in class ParallelTesting

Create a new parallel testing instance.

PendingCommand::__construct() — Method in class PendingCommand

Create a new pending console command run.

PendingCommand::__destruct() — Method in class PendingCommand

Handle the object's destruction.

TestComponent::__construct() — Method in class TestComponent

Create a new test component instance.

TestComponent::__toString() — Method in class TestComponent

Get the string contents of the rendered component.

TestComponent::__get() — Method in class TestComponent

Dynamically access properties on the underlying component.

TestComponent::__call() — Method in class TestComponent

Dynamically call methods on the underlying component.

TestResponse::__construct() — Method in class TestResponse

Create a new test response instance.

TestResponse::__get() — Method in class TestResponse

Dynamically access base response parameters.

TestResponse::__isset() — Method in class TestResponse

Proxy isset() checks to the underlying base response.

TestResponse::__call() — Method in class TestResponse

Handle dynamic calls into macros or pass missing methods to the base response.

TestView::__construct() — Method in class TestView

Create a new test view instance.

TestView::__toString() — Method in class TestView

Get the string contents of the rendered view.

FileLoader::__construct() — Method in class FileLoader

Create a new file loader instance.

PotentiallyTranslatedString::__construct() — Method in class PotentiallyTranslatedString

Create a new potentially translated string.

PotentiallyTranslatedString::__toString() — Method in class PotentiallyTranslatedString

Get the potentially translated string.

Translator::__construct() — Method in class Translator

Create a new translator instance.

ClosureValidationRule::__construct() — Method in class ClosureValidationRule

Create a new pending potentially translated string.

ClosureValidationRule::__destruct() — Method in class ClosureValidationRule

Handle the object's destruction.

FilterEmailValidation::__construct() — Method in class FilterEmailValidation

Create a new validation instance.

ConditionalRules::__construct() — Method in class ConditionalRules

Create a new conditional rules instance.

DatabasePresenceVerifier::__construct() — Method in class DatabasePresenceVerifier

Create a new database presence verifier.

Factory::__construct() — Method in class Factory

Create a new Validator factory instance.

InvokableValidationRule::__construct() — Method in class InvokableValidationRule

Create a new explicit Invokable validation rule.

NestedRules::__construct() — Method in class NestedRules

Create a new nested rule instance.

NotPwnedVerifier::__construct() — Method in class NotPwnedVerifier

Create a new uncompromised verifier.

DatabaseRule::__construct() — Method in class DatabaseRule

Create a new rule instance.

Dimensions::__construct() — Method in class Dimensions

Create a new dimensions rule instance.

Dimensions::__toString() — Method in class Dimensions

Convert the rule to a validation string.

Enum::__construct() — Method in class Enum

Create a new rule instance.

ExcludeIf::__construct() — Method in class ExcludeIf

Create a new exclude validation rule based on a condition.

ExcludeIf::__toString() — Method in class ExcludeIf

Convert the rule to a validation string.

Exists::__toString() — Method in class Exists

Convert the rule to a validation string.

ImageFile::__construct() — Method in class ImageFile

Create a new image file rule instance.

In::__construct() — Method in class In

Create a new in rule instance.

In::__toString() — Method in class In

Convert the rule to a validation string.

NotIn::__construct() — Method in class NotIn

Create a new "not in" rule instance.

NotIn::__toString() — Method in class NotIn

Convert the rule to a validation string.

Password::__construct() — Method in class Password

Create a new rule instance.

ProhibitedIf::__construct() — Method in class ProhibitedIf

Create a new prohibited validation rule based on a condition.

ProhibitedIf::__toString() — Method in class ProhibitedIf

Convert the rule to a validation string.

RequiredIf::__construct() — Method in class RequiredIf

Create a new required validation rule based on a condition.

RequiredIf::__toString() — Method in class RequiredIf

Convert the rule to a validation string.

Unique::__toString() — Method in class Unique

Convert the rule to a validation string.

ValidationException::__construct() — Method in class ValidationException

Create a new exception instance.

ValidationRuleParser::__construct() — Method in class ValidationRuleParser

Create a new validation rule parser.

Validator::__construct() — Method in class Validator

Create a new Validator instance.

Validator::__call() — Method in class Validator

Handle dynamic calls to class methods.

AnonymousComponent::__construct() — Method in class AnonymousComponent

Create a new anonymous component instance.

AppendableAttributeValue::__construct() — Method in class AppendableAttributeValue

Create a new appendable attribute value.

AppendableAttributeValue::__toString() — Method in class AppendableAttributeValue

Get the string value.

BladeCompiler::__construct() — Method in class BladeCompiler

Create a new compiler instance.

Compiler::__construct() — Method in class Compiler

Create a new compiler instance.

ComponentTagCompiler::__construct() — Method in class ComponentTagCompiler

Create a new component tag compiler.

ComponentAttributeBag::__construct() — Method in class ComponentAttributeBag

Create a new component attribute bag instance.

ComponentAttributeBag::__invoke() — Method in class ComponentAttributeBag

Merge additional attributes / values into the attribute bag.

ComponentAttributeBag::__toString() — Method in class ComponentAttributeBag

Implode the attributes into a single HTML ready string.

ComponentSlot::__construct() — Method in class ComponentSlot

Create a new slot instance.

ComponentSlot::__toString() — Method in class ComponentSlot

Get the slot's HTML string.

DynamicComponent::__construct() — Method in class DynamicComponent

Create a new component instance.

CompilerEngine::__construct() — Method in class CompilerEngine

Create a new compiler engine instance.

FileEngine::__construct() — Method in class FileEngine

Create a new file engine instance.

PhpEngine::__construct() — Method in class PhpEngine

Create a new file engine instance.

Factory::__construct() — Method in class Factory

Create a new view factory instance.

FileViewFinder::__construct() — Method in class FileViewFinder

Create a new file view loader instance.

InvokableComponentVariable::__construct() — Method in class InvokableComponentVariable

Create a new variable instance.

InvokableComponentVariable::__get() — Method in class InvokableComponentVariable

Dynamically proxy attribute access to the variable.

InvokableComponentVariable::__call() — Method in class InvokableComponentVariable

Dynamically proxy method access to the variable.

InvokableComponentVariable::__invoke() — Method in class InvokableComponentVariable

Resolve the variable.

InvokableComponentVariable::__toString() — Method in class InvokableComponentVariable

Resolve the variable as a string.

ShareErrorsFromSession::__construct() — Method in class ShareErrorsFromSession

Create a new error binder instance.

View::__construct() — Method in class View

Create a new view instance.

View::__get() — Method in class View

Get a piece of data from the view.

View::__set() — Method in class View

Set a piece of data on the view.

View::__isset() — Method in class View

Check if a piece of data is bound to the view.

View::__unset() — Method in class View

Remove a piece of bound data from the view.

View::__call() — Method in class View

Dynamically bind parameters to the view.

View::__toString() — Method in class View

Get the string contents of the view.